CISCO-WAN-RTP-CONN-MIB
47 objects
The MIB module is defined for establishing connection between an endpoint and another endpoint on a remote VISM in the case of VoIP(Voice over IP) trunking application.
Imported Objects
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.150.20 | IdentityciscoWanRtpConnMIB | The MIB module is defined for establishing connection between an endpoint and another endpoint on a remote VISM in the case of VoIP(Voice over IP) trunking app… | ||
| 1.3.6.1.4.1.351.150.20.1 | NodeciscoWanRtpConnMIBObjects | |||
| 1.3.6.1.4.1.351.150.20.1.1 | NodevismRtpConnGrp | |||
| 1.3.6.1.4.1.351.150.20.1.1.1 | TablevismRtpConnGrpTable | not-accessible | current | This table defines attributes used to set up a static trunked VoIP connection between an endpoint and another endpoint on a remote VISM. The maximum number of … |
| 1.3.6.1.4.1.351.150.20.1.1.1.1 | RowvismRtpConnGrpEntry | not-accessible | current | An entry in the vismRtpConnGrpTable. This table applies to VoIP trunking applications. The configuration is retained after VISM card reboots. vismRtpCodecType,… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.1 | ColumnvismRtpConnNum | not-accessible | current | This is the connection number in vismRtpConnGrpTable. |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.2 | ColumnvismRtpEndptNum | read-create | current | This object defines the endpoint number to which the RTP connection associated. It is the same as mgEndpointNumber object in mgEndpointTable(defined in CISCO-W… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.3 | ColumnvismRtpLocPort | read-create | current | This object determines the static local RTP port (UDP) that this connection is using. Only even numbers are allowed as odd numbers are used for RTCP(Real-time … |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.4 | ColumnvismRtpRmtIp | read-create | current | This object determines the remote VISM's IP address. For every RTP connection the remote port and remote IP pair needs to be unique. |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.5 | ColumnvismRtpRmtPort | read-create | current | This object determines the static remote RTP port (UDP) that this connection is using. Only even numbers are allowed as odd numbers are used for RTCP port. The… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.6 | ColumnvismRtpConnMode | read-create | current | This object defines the packet transfer mode on the connection. 'sendOnly' - indicate send packet only. 'rcvOnly' - indicate receive packet only. 'sendAndRcv' … |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.7 | ColumnvismRtpBearerTos | read-create | current | This object is used to provision the bitmask used for the Type Of Service (TOS) octet for cells carrying VoIP bearer (RTP) traffic. The first 3 bits denotes th… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.8 | ColumnvismRtpCodecType | read-create | current | This object is used to define what codec is used to transport voice packets on a RTP connection. 1 represents G.711u 2 represents G.711a 3 represents G.726 at … |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.9 | ColumnvismRtpPktPeriod | read-create | current | This object gives the packetization period for a particular codec in milli secs. for G.711a allowed values are 10 & 20 for G.711u allowed values are 10 & 20 fo… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.10 | ColumnvismRtpVadTimer | read-create | current | This attribute defines the hangover time for VAD (Voice Activity Detection) in milliseconds. Once the voice inactivity is detected, the gateway will wait for t… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.11 | ColumnvismRtpEcanEnable | read-create | current | This attribute defines whether Echo Cancellation has to be enabled on this connection. If it is set to 'true(1)', echo cancellation is enabled. If it is set to… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.12 | ColumnvismRtpTriRedundancy | read-create | current | This object tells whether the packets need to be sent in triplicates or not. If it is set to 'true(1)' the packets will be sent three times else will only be s… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.13 | ColumnvismRtpDtmfTransport | read-create | current | This attribute defines whether the DTMF (Dual Tone Multi Frequency) digits need to be transported to the other end-point. |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.14 | ColumnvismRtpCasTransport | read-create | current | This attribute defines whether the CAS(Channel Associated Signaling) bits need to be transported to the other endpoint. In the case of switching application, t… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.15 | ColumnvismRtpVad | read-create | current | This attribute defines whether the VAD has to be applied on this channel, upon detection of silence. For algorithms that do not have VAD standards, Cisco-propr… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.16 | ColumnvismRtpICSEnable | read-create | current | This attribute is used to enable or disable the ICS(Idle Channel Suppression) for a connection. This can be specified while adding the connection and cannot be… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.17 | ColumnvismRtpConnAlarmState | read-only | current | This attribute shows the alarm state of this connection. It is set to 'failed' if the connection is in alarm else will be set to 'active'. |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.18 | ColumnvismRtpRowStatus | read-create | current | This object is used to create, modify or delete an entry. An entry can be created using the 'createAndGo' option. Before creating a RTP connection, the endpoin… |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.19 | ColumnvismRtpLcn | read-only | current | This object is used to indicate the RTP related LCN (Logical channel number). Only the primary PVC (Permanent virtual circuit) is used for this object. |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.20 | ColumnvismRtpFailReason | read-only | current | This object is used to indicate the RTP failure reason. 'self' : fail because of non-PVC alarm. 'highLevel' : fail because of PVC alarm. 'both' : fail because … |
| 1.3.6.1.4.1.351.150.20.1.1.1.1.21 | ColumnvismRtpPayloadType | read-create | current | This object specifies the payload type to be used, when adding connection(s) in VoIP Trunking. IANA (Internet assigned number Authority) values (0..95) are sta… |
| 1.3.6.1.4.1.351.150.20.1.2 | NodevismRtpBearerStatsGrp | |||
| 1.3.6.1.4.1.351.150.20.1.2.1 | TablevismRtpBearerStatsTable | not-accessible | current | This table contains the RTP bearer statistics. |
| 1.3.6.1.4.1.351.150.20.1.2.1.1 | RowvismRtpBearerStatsEntry | not-accessible | current | An entry is implicitly created when a RTP connection is established. All the statistics in this table can not be modified by user. |
| 1.3.6.1.4.1.351.150.20.1.2.1.1.1 | ColumnvismRtpPktsSent | read-only | current | This object shows the number of packets sent to network side. |
| 1.3.6.1.4.1.351.150.20.1.2.1.1.2 | ColumnvismRtpPktsRcv | read-only | current | This object shows the number of packets received from network side. |
| 1.3.6.1.4.1.351.150.20.1.2.1.1.3 | ColumnvismRtpOctsSent | read-only | current | This object shows the number of octets sent to network side. |
| 1.3.6.1.4.1.351.150.20.1.2.1.1.4 | ColumnvismRtpOctsRcv | read-only | current | This object shows the number of octets received from network side. |
| 1.3.6.1.4.1.351.150.20.1.2.1.1.5 | ColumnvismRtpPktsLost | read-only | current | This object shows the number of RTCP packets lost due to invalid connection mode. |
| 1.3.6.1.4.1.351.150.20.1.2.1.1.6 | ColumnvismRtpCntsCleared | read-write | current | This object is used to clear all the above objects. |
| 1.3.6.1.4.1.351.150.20.1.2.1.1.7 | ColumnvismRtpInterArrivalJitter | read-only | current | This object provides the average interarrival jitter value between packets during a VoIP call. |
| 1.3.6.1.4.1.351.150.20.1.2.1.1.8 | ColumnvismRtpLatency | read-only | current | The round trip delay for a voice packet to travel from the originating end of a VoIP call to the terminating end and back. |
| 1.3.6.1.4.1.351.150.20.2 | NodevismRtpConnNotificationPrefix | |||
| 1.3.6.1.4.1.351.150.20.2.0 | NodevismRtpConnNotifications | |||
| 1.3.6.1.4.1.351.150.20.3 | NodevismRtpConnMIBConformance | |||
| 1.3.6.1.4.1.351.150.20.3.1 | NodevismRtpConnMIBCompliances | |||
| 1.3.6.1.4.1.351.150.20.3.1.1 | CompliancevismRtpConnMIBCompliance | deprecated | The complaince statement for RTP connection group which implements vismRtpConnGrp MIB. | |
| 1.3.6.1.4.1.351.150.20.3.1.2 | CompliancevismRtpConnMIBComplianceRev1 | current | The complaince statement for RTP connection group which implements vismRtpConnGrp MIB. | |
| 1.3.6.1.4.1.351.150.20.3.2 | NodevismRtpConnMIBGroups | |||
| 1.3.6.1.4.1.351.150.20.3.2.1 | GroupvismRtpConnGroup | current | This group contains objects related to configuration of RTP connections. | |
| 1.3.6.1.4.1.351.150.20.3.2.2 | GroupvismRtpBearerStatsGroup | current | This group contains counters for each RTP connection. | |
| 1.3.6.1.4.1.351.150.20.3.2.3 | GroupvismRtpBearerStatsGroupSup1 | current | This group is a supplement for vismRtpBearerStatsGroup and contains statistics for each RTP connection. |