CISCO-WAN-SRM-BERT-MIB
49 objects
The MIB Module for BERT(Bit Error Rate Testing) using Service Resource Module(SRM). This MIB module is used for BERT on FRSM, AUSM, CESM, VISM modules. This module contains information on results from BERT tests using DDS(Digital Data Service) pattern.
Imported Objects
| BASIS-MIB | axisDiagnostics |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.6.1 | Nodebert | |||
| 1.3.6.1.4.1.351.110.6.1.1 | ScalarbertControl | read-write | current | This object controls all the SET operations on this MIB group. acquireBert : Acquire BERT resources. cnfBert : Configure the required BERT test. startBert : Th… |
| 1.3.6.1.4.1.351.110.6.1.2 | ScalarbertResourceStatus | read-only | current | All of bert resources can be used by only one user at a time. This gives the status of the resources. |
| 1.3.6.1.4.1.351.110.6.1.3 | ScalarbertOwner | read-only | current | This refers to the user who owns the BERT resources. If the user is a CLI user, then this is username. If it is SNMP Manager(For example Cisco Wan Manager), th… |
| 1.3.6.1.4.1.351.110.6.1.4 | ScalarbertUserId | read-write | current | This identifies the user who wants to do a SET operation on this group. This will be compared against bertOwner and access will be given only if it matches. He… |
| 1.3.6.1.4.1.351.110.6.1.5 | ScalarbertStatus | read-only | current | This variable provides the status of BERT in the shelf. |
| 1.3.6.1.4.1.351.110.6.1.6 | ScalarbertSlotNumber | read-write | current | specifies the physical slot number of the Service Module which is to run BERT For MGX 8220, the range is 5-14. For MGX 8850, the range is 1-6, 9-14, 17-22, 25-… |
| 1.3.6.1.4.1.351.110.6.1.7 | ScalarbertTestMedium | read-write | current | specifies whether the bert is to test a port or an entire T1/E1 line. No default value for this, it has to be set if bert is configured. |
| 1.3.6.1.4.1.351.110.6.1.8 | ScalarbertPort | read-write | current | specifies the port number for BERT. |
| 1.3.6.1.4.1.351.110.6.1.9 | ScalarbertLine | read-write | current | specifies the line number for BERT. If the test medium is port, this represents the line to which the port belongs. |
| 1.3.6.1.4.1.351.110.6.1.10 | ScalarbertMode | read-write | current | specifies the mode, the BERT module is to be configured for. |
| 1.3.6.1.4.1.351.110.6.1.11 | ScalarbertDeviceToLoop | read-write | current | This shows the type of the end device and the type of the loopback used (latching/nonlatching/polynomial). |
| 1.3.6.1.4.1.351.110.6.1.12 | ScalarbertDS0DPIterationCount | read-write | current | The Iteration Register needs to be programmed in SRM when DSO drop loop option is selected in bertDeviceToLoop. The value to be programmed there is minus one o… |
| 1.3.6.1.4.1.351.110.6.1.13 | ScalarbertPattern | read-write | current | This variable determines BERT pattern to be transmitted. |
| 1.3.6.1.4.1.351.110.6.1.14 | ScalarbertLoopback | read-write | current | specifies the type of loopback to be (d)established. |
| 1.3.6.1.4.1.351.110.6.1.15 | ScalarbertLoopbackOperation | read-write | current | specifies the operation of loopback (up or down). |
| 1.3.6.1.4.1.351.110.6.1.16 | ScalarbertDS0Speed | read-only | current | represents the ds0 speed of the test running. |
| 1.3.6.1.4.1.351.110.6.1.17 | ScalarbertTimeSlots | read-only | current | represents the number of ds0s in the test medium chosen. |
| 1.3.6.1.4.1.351.110.6.1.18 | ScalarbertStartTime | read-only | current | The syntax is hh:mm:ss The time zone is as configured in the shelf. |
| 1.3.6.1.4.1.351.110.6.1.19 | ScalarbertStartDate | read-only | current | On MGX 8220, the syntax is mm/dd/yy On MGX 8850, the syntax is mm/dd/yyyy. |
| 1.3.6.1.4.1.351.110.6.1.20 | ScalarbertBitCount | read-only | current | This shows the number of bits transmitted. |
| 1.3.6.1.4.1.351.110.6.1.21 | ScalarbertBitErrorCount | read-only | current | This shows the number of bits received in error. |
| 1.3.6.1.4.1.351.110.6.1.22 | ScalarbertErrorInjectCount | read-only | current | This shows the number of times error was injected. |
| 1.3.6.1.4.1.351.110.6.1.23 | ScalarbertCleanupAction | read-only | current | When the BERT has to be stopped or aborted (due to card state changes), this object would give the exact action to take. The bert related changes to the shelf,… |
| 1.3.6.1.4.1.351.110.6.1.24 | ScalarbertAbortReason | read-only | current | when the BERT is aborted, this object would give the reason for that. |
| 1.3.6.1.4.1.351.110.6.1.25 | ScalarbertDDSSeekResultsTableFirstIndex | read-only | current | Denotes the index of the oldest entry in the table. A value of zero means that there are no entries in the table. |
| 1.3.6.1.4.1.351.110.6.1.26 | ScalarbertDDSSeekResultsTableLastIndex | read-only | current | Denotes the index of the latest entry in the table. A value of zero means that there are no entries in the table. |
| 1.3.6.1.4.1.351.110.6.1.27 | TablebertDDSSeekResultsTable | not-accessible | current | This table contains all available DDS patterns detected and latched by an interaface(lines,ports etc) configured to detect DDS patterns. |
| 1.3.6.1.4.1.351.110.6.1.27.1 | RowbertDDSSeekResultsTableEntry | not-accessible | current | An entry in the detected DDS codes table. |
| 1.3.6.1.4.1.351.110.6.1.27.1.1 | ColumnbertDDSSeekResultsTableIndex | read-only | current | Denotes the serial number of the entry in the table. |
| 1.3.6.1.4.1.351.110.6.1.27.1.2 | ColumnbertDDSCode | read-only | current | Denotes the type of DDS code detected. |
| 1.3.6.1.4.1.351.110.6.1.28 | TablebertSupportedTestsTable | not-accessible | current | A list of supported tests for a given SM. |
| 1.3.6.1.4.1.351.110.6.1.28.1 | RowbertSupportedTestsTableEntry | not-accessible | current | A general supported tests entry. |
| 1.3.6.1.4.1.351.110.6.1.28.1.1 | ColumnbertSupportedTestsTableIndex | read-only | current | This index is the physical slot number of the Service Module whose entry it represents in the table. For MGX 8220, the range is 5-14. For MGX 8850, the range i… |
| 1.3.6.1.4.1.351.110.6.1.28.1.2 | ColumnbertSupportFlag | read-only | current | 'yes' if the table entry correctly represents the supported tests for the SM on the corresponding slot. 'no' if no tests at all are supported. |
| 1.3.6.1.4.1.351.110.6.1.28.1.3 | ColumnbertTestMediumMask | read-only | current | Every test medium is represented by a bit of mask. Bits 0-1 are valid in this integer. The meaning of the mask can be understood from the example below: TestMe… |
| 1.3.6.1.4.1.351.110.6.1.28.1.4 | ColumnbertModeMask | read-only | current | Every mode is represented by 2 bits of mask. Bits 0-5 are valid in this integer. The meaning of the mask can be understood from the example below: Mode | SM su… |
| 1.3.6.1.4.1.351.110.6.1.28.1.5 | ColumnbertDeviceToLoopMask | read-only | current | Every class of devices to loop is represented by 6 bits of mask. Bits 0-29 are valid in this integer. The meaning of the mask can be understood from the exampl… |
| 1.3.6.1.4.1.351.110.6.1.28.1.6 | ColumnbertPatternMask | read-only | current | Every class of patterns is represented by 2 bits of mask. Bits 0-3 are valid in this integer. The meaning of the mask can be understood from the example below:… |
| 1.3.6.1.4.1.351.110.6.1.28.1.7 | ColumnbertLoopbackMask | read-only | current | Every loopback is represented by 2 bits of mask. Bits 0-5 are valid in this integer. The meaning of the mask can be understood from the example below: Loopback… |
| 1.3.6.1.4.1.351.110.6.1.28.1.8 | ColumnbertCardT1E1Type | read-only | current | Specifies whether a t1 or e1 card. |
| 1.3.6.1.4.1.351.150.31 | IdentityciscoWanSrmBertMIB | The MIB Module for BERT(Bit Error Rate Testing) using Service Resource Module(SRM). This MIB module is used for BERT on FRSM, AUSM, CESM, VISM modules. This mo… | ||
| 1.3.6.1.4.1.351.150.31.2 | NodeciscoWanSrmBertMIBConformance | |||
| 1.3.6.1.4.1.351.150.31.2.1 | NodeciscoWanSrmBertMIBGroups | |||
| 1.3.6.1.4.1.351.150.31.2.1.1 | GroupciscoWanSrmBertConfGroup | current | The collection of objects which are used for configuring/running BERT on Service modules using SRM module. | |
| 1.3.6.1.4.1.351.150.31.2.1.2 | GroupciscoWanSrmBertTestResultsGroup | current | The collection of objects which are used for finding the results of running BERT tests. | |
| 1.3.6.1.4.1.351.150.31.2.1.3 | GroupciscoWanSrmBertDDSResultsGroup | current | The collection of objects which are used for finding the results of running BERT tests using DDS pattern. | |
| 1.3.6.1.4.1.351.150.31.2.2 | NodeciscoWanSrmBertMIBCompliances | |||
| 1.3.6.1.4.1.351.150.31.2.2.1 | ComplianceciscoWanSrmBertCompliance | current | The compliance statement for objects related to Bert MIB. |