CISCO-WAN-SRM-MIB
24 objects
The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interfaces). This is used for configuring bulk distribution of T3 interfaces on T1 modules supported in MGX82xx series. Some of the T1 modules are AUSM, FRSM,CESM. This MIB module also contains info. on configuring bulk distribution of SONET interfaces(VT interfaces) on T1 Modules. SRM - Service Resource Module SRME - Service Resource Module Enhanced.
Imported Objects
| BASIS-MIB | cardSpecific |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.3.10 | Nodesrm3T3CnfGrp | |||
| 1.3.6.1.4.1.351.110.3.10.1 | Tablesrm3T3CnfGrpTable | not-accessible | current | The SRM 3T3 configuration table, it is the distribution of a T3 line. |
| 1.3.6.1.4.1.351.110.3.10.1.1 | Rowsrm3T3CnfGrpEntry | not-accessible | current | an entry in the T3 configuration table |
| 1.3.6.1.4.1.351.110.3.10.1.1.1 | ColumnsrmT3LineNum | read-only | current | Select T3 line number. There is no default value for this object. |
| 1.3.6.1.4.1.351.110.3.10.1.1.2 | ColumnsrmStartT1LineNum | read-only | current | The start T1 number to be affected. There is no default value for this object. |
| 1.3.6.1.4.1.351.110.3.10.1.1.3 | ColumnsrmT1RowStatus | read-write | current | a command is used to add, delete, or modify one or more DS1 mapping. Default value is delete. |
| 1.3.6.1.4.1.351.110.3.10.1.1.4 | ColumnsrmTargetSlotNum | read-write | current | specify the target slot number to be linked. There is no default value for this object. For MGX8850: SRM01 services slots 1 - 6 and 9 - 14, SRM02 services slot… |
| 1.3.6.1.4.1.351.110.3.10.1.1.5 | ColumnsrmTargetSlotLineNum | read-write | current | 0 means not assigned. There is no default value for this object. |
| 1.3.6.1.4.1.351.110.3.22 | NodesrmeCnfGrp | |||
| 1.3.6.1.4.1.351.110.3.22.1 | TablesrmeCnfGrpTable | not-accessible | current | The SRME configuration table for bulk distribution of SRME lines. |
| 1.3.6.1.4.1.351.110.3.22.1.1 | RowsrmeCnfGrpEntry | not-accessible | current | an entry in the SRME Distribution configuration table |
| 1.3.6.1.4.1.351.110.3.22.1.1.1 | ColumnsrmeLineNum | read-only | current | This object identifies the SRME line number. For OC3/STM1: SYNTAX Integer32 1 There is no default value for this object. |
| 1.3.6.1.4.1.351.110.3.22.1.1.2 | ColumnsrmeStartVtNum | read-only | current | The start T1 or E1 number (virtual tributary) to be affected. For OC3 with T1 tributaries: SYNTAX Integer32 (1 .. 84) For STM1 with E1 tributaries: SYNTAX Inte… |
| 1.3.6.1.4.1.351.110.3.22.1.1.3 | ColumnsrmeRowStatus | read-write | current | Command used to add, delete, or modify one or more T1 or E1 mappings. Only the srmeVtFramingType object can be modified once the distribution link is added. To… |
| 1.3.6.1.4.1.351.110.3.22.1.1.4 | ColumnsrmeTargetSlotNum | read-write | current | This object specifies the target slot number to be linked. There is no default value for this object. For MGX8x50: SRM01 services slots 1 - 6 and 9 - 14, SRM02… |
| 1.3.6.1.4.1.351.110.3.22.1.1.5 | ColumnsrmeTargetSlotLineNum | read-write | current | Specify the target slot's line to be linked. The value zero means, the target line number is not assigned. There is no default value for this object. |
| 1.3.6.1.4.1.351.110.3.22.1.1.6 | ColumnsrmeVtFramingType | read-write | current | Specifies the Framing Type of the target slot line. This is applicable only if the target module is a T1 Service Module and byte sync mapping is used on SRME. … |
| 1.3.6.1.4.1.351.150.30 | IdentityciscoWanSrmMIB | The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interfaces). This is used for config… | ||
| 1.3.6.1.4.1.351.150.30.2 | NodeciscoWanSrmMIBConformance | |||
| 1.3.6.1.4.1.351.150.30.2.1 | NodeciscoWanSrmMIBGroups | |||
| 1.3.6.1.4.1.351.150.30.2.1.1 | GroupciscoWanSrmConfGroup | current | The collection of objects which are used for configuring bulk distribution for SRM module. | |
| 1.3.6.1.4.1.351.150.30.2.1.2 | GroupciscoWanSrmeConfGroup | current | The collection of objects which are used for configuring bulk distribution for SRM-E module. | |
| 1.3.6.1.4.1.351.150.30.2.2 | NodeciscoWanSrmMIBCompliances | |||
| 1.3.6.1.4.1.351.150.30.2.2.1 | ComplianceciscoWanSrmCompliance | current | The compliance statement for objects related to SRM MIB. |