CISCO-WIRELESS-P2MP-PHY-MIB
113 objects
This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | Unsigned32 |
| CISCO-WIRELESS-TC-MIB | CwrOscState CwrRfFreqRange CwrRfType |
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex |
| SNMPv2-CONF | -- MODULE-COMPLIANCE NOTIFICATION-GROUP MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.170 | IdentityciscoWirelessPhyMIB | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface. | ||
| 1.3.6.1.4.1.9.9.170.1 | Nodep2mpRadioObjects | |||
| 1.3.6.1.4.1.9.9.170.1.1 | Nodep2mpRadioBaseObjects | |||
| 1.3.6.1.4.1.9.9.170.1.1.1 | Nodep2mpPhyConfigGroup | |||
| 1.3.6.1.4.1.9.9.170.1.1.1.1 | Tablep2mpRadioPhyTable | not-accessible | current | This table provides facilities to configure the physical layer characteristics of the radio link. The objects in this table are supported on the head end and a… |
| 1.3.6.1.4.1.9.9.170.1.1.1.1.1 | Rowp2mpRadioPhyEntry | not-accessible | current | The entry of this table is created when the managed system detects a propDocsWirelessMaclayer interface. The entry is removed when the associated propDocsWirel… |
| 1.3.6.1.4.1.9.9.170.1.1.1.1.1.1 | Columnp2mpSelfTest | read-write | current | This object is used to enable/disable self test. When set to true(1), the software tests the memory and hardware integrity shortly after the router powers up. |
| 1.3.6.1.4.1.9.9.170.1.1.1.1.1.2 | Columnp2mpDiversityAntennaPresent | read-write | current | When true(1), this object indicates that a diversity antenna is being used to receive the wireless transmissions. When false(2), the radio system is using a si… |
| 1.3.6.1.4.1.9.9.170.1.1.1.1.1.3 | Columnp2mpCableLoss | read-write | current | This object indicates the measured signal power loss in dB due to the cable connecting the radio to the main antenna. The hardware compensates for this cable l… |
| 1.3.6.1.4.1.9.9.170.1.1.1.1.1.4 | Columnp2mpCableLossDiversity | read-write | current | This object indicates the measured signal power loss in dB due to the cable connecting the radio to the diversity antenna. The hardware compensates for this lo… |
| 1.3.6.1.4.1.9.9.170.1.1.1.1.1.5 | Columnp2mpDenyService | read-only | current | Indicates if the service is disabled in the unit. For Head-end unit, if this object has the value of 'true', the link is in loopback mode; otherwise the link i… |
| 1.3.6.1.4.1.9.9.170.1.1.1.1.1.6 | Columnp2mpClockRefExt | read-write | current | This object controls the use of external reference clock for IF module as follows: 'true(1)' - an external reference clock is used 'false(2)' - an internal ref… |
| 1.3.6.1.4.1.9.9.170.1.1.1.1.1.7 | Columnp2mpCommonTrapEnable | read-write | current | When set to true(1), the notifications common to the head end and subscriber unit are enabled. When set to false(2), these notifications are disabled. The noti… |
| 1.3.6.1.4.1.9.9.170.1.1.1.1.1.8 | Columnp2mpLastPhyFailureType | read-only | current | This object indicates the last physical link failure that resulted in a p2mpRadioPhyFailNotification trap. none(1) - no failure p2mpHwConfigUnsupported(2) - Th… |
| 1.3.6.1.4.1.9.9.170.1.1.1.1.1.9 | Columnp2mpLastPhyFailureReason | read-only | current | This is a text string that describes the last physical link failure identified by p2mpLastPhyFailureType. |
| 1.3.6.1.4.1.9.9.170.1.1.2 | Nodep2mpFreqResourceGroup | |||
| 1.3.6.1.4.1.9.9.170.1.1.2.1 | Tablep2mpRfTable | not-accessible | current | This table contains information about the state of the radio frequency resources used by the radio system. Physically each RF resource may be realized by one a… |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1 | Rowp2mpRfEntry | not-accessible | current | This represents one entry in the p2mpRfTable. An entry is created in this table when the managed system detects a RF resource. The entry is removed when the RF… |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.1 | Columnp2mpRfIndex | not-accessible | current | This object, along with the ifIndex of the MAC layer, represents the index of this entry in the p2mpRfTable. Each entry in the table provides details on the st… |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.2 | Columnp2mpRfType | read-only | current | This object identifies the RF resource. |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.3 | Columnp2mpRfOpMode | read-only | current | This object specifies whether this RF resource can either transmit, receive, or do both. |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.4 | Columnp2mpTxFreqRangeMin | read-only | current | This object represents the minimum frequency at which this RF resource can transmit. |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.5 | Columnp2mpTxFreqRangeMax | read-only | current | This object represents the maximum frequency at which this RF resource can transmit. |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.6 | Columnp2mpRxFreqRangeMin | read-only | current | This object represents the lowest transmission frequency this RF resource can receive. |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.7 | Columnp2mpRxFreqRangeMax | read-only | current | This object represents the highest transmission frequency that this RF resource can receive. |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.8 | Columnp2mpMinTxPower | read-only | current | This object represents the minimum power that the RF subsystem can supply the antenna. |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.9 | Columnp2mpMaxTxPower | read-only | current | This object represents the maximum power that the RF subsystem can supply the antenna. |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.10 | Columnp2mpRfTemperature | read-only | current | This object represents the current temperature of the RF unit |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.11 | Columnp2mpRfTxOscState | read-only | current | This object represents the state of the transmit oscillator. The oscillator must be in oscillatorOk(1) state for the system to function properly. |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.12 | Columnp2mpRfRxOscState | read-only | current | This object represents the state of the receive oscillator. The oscillator must be in oscillatorOk(1) state for the system to function properly. |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.13 | Columnp2mpRfSupplyVoltageState | read-only | current | This object specifies whether the voltage supply to the RF unit is within specifications or not. Voltage specifications are hardware dependent. |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.14 | Columnp2mpRfStatus | read-only | current | This object specifies whether the RF resource is functioning properly. If it is functioning properly then it will be online(1), else offline(2). At the Subscri… |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.15 | Columnp2mpRfLoopbackSupported | read-only | current | This object indicates if the RF unit supports loopback. When true(1), the user can configure loopback using the objects in p2mpLoopbackTable. When false(2), an… |
| 1.3.6.1.4.1.9.9.170.1.1.2.2 | Tablep2mpDuplexerTable | not-accessible | current | This table contains information about the Duplexers available for use on the system. A Duplexer is a mechanical device, that acts as a band pass filter when in… |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1 | Rowp2mpDuplexerEntry | not-accessible | current | This represents one entry in the p2mpDuplexerTable. Each entry contains information about the duplexers capabilities and the associated RF resource. An entry i… |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1.1 | Columnp2mpDuplexerIndex | not-accessible | current | This object, along with ifIndex, uniquely identifies an entry in this table. Each entry contains information about the duplexer's capabilities and also identif… |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1.2 | Columnp2mpDuplexerRF | read-only | current | This object identifies the RF resource associated with this duplexer. |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1.3 | Columnp2mpDuplexerLoPassbandMinFreq | read-only | current | This object identifies the minimum frequency in the low passband that this duplexer will pass through without attenuation. |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1.4 | Columnp2mpDuplexerLoPassbandMaxFreq | read-only | current | This object identifies the maximum frequency in the low passband that this duplexer will pass through without attenuation. |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1.5 | Columnp2mpDuplexerHiPassbandMinFreq | read-only | current | This object identifies the minimum frequency in the high passband that this duplexer will pass through without attenuation. |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1.6 | Columnp2mpDuplexerHiPassbandMaxFreq | read-only | current | This object identifies the maximum frequency in the high passband that this duplexer will pass through without attenuation. |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1.7 | Columnp2mpDuplexerReceivePassband | read-only | current | This object indicates which of the two passbands are being used to receive transmissions. The RF Resource can receive on either of the duplexer passbands. loPa… |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1.8 | Columnp2mpDuplexerTxInsertionLoss | read-only | current | This object represents the loss in 'dB' that would result in the transmission path due to the duplexer. |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1.9 | Columnp2mpDuplexerBurnDate | read-only | current | This object indicates the date when the revision information was programmed into non-volatile memory. |
| 1.3.6.1.4.1.9.9.170.1.1.2.3 | Tablep2mpAntennaTable | not-accessible | current | This table contains information about the antennas available in the system. |
| 1.3.6.1.4.1.9.9.170.1.1.2.3.1 | Rowp2mpAntennaEntry | not-accessible | current | An entry is created in this table when the managed system detects a RF resource. The entry is removed when the RF resource is removed from the wireless system. |
| 1.3.6.1.4.1.9.9.170.1.1.2.3.1.1 | Columnp2mpAntennaIndex | not-accessible | current | This object, along with ifIndex, represents the index of this entry in the p2mpAntennaTable. |
| 1.3.6.1.4.1.9.9.170.1.1.2.3.1.2 | Columnp2mpRfResource | read-only | current | This object identifies if the antenna is connected to the main or the diversity RF resource. |
| 1.3.6.1.4.1.9.9.170.1.1.2.3.1.3 | Columnp2mpAntennaXDim | read-write | current | This object represents the dimension of the antenna in the X direction. |
| 1.3.6.1.4.1.9.9.170.1.1.2.3.1.4 | Columnp2mpAntennaYDim | read-write | current | This object represents the dimension of the antenna in the Y direction. |
| 1.3.6.1.4.1.9.9.170.1.1.2.3.1.5 | Columnp2mpAntennaType | read-write | current | This object represents the antenna type. For example, 'dish-antenna'. |
| 1.3.6.1.4.1.9.9.170.1.1.2.3.1.6 | Columnp2mpAntennaDescr | read-write | current | This object is used to describe the antenna. For example, it could be used to identify the manufacturer like in 'Manufactured by Watkins Johnson'. |
| 1.3.6.1.4.1.9.9.170.1.1.2.3.1.7 | Columnp2mpAntennaGain | read-write | current | This object represents the receive and transmit gain of this antenna. |
| 1.3.6.1.4.1.9.9.170.1.1.2.3.1.8 | Columnp2mpAntennaPolarization | read-only | current | This object represents the polarization of the antanna. |
| 1.3.6.1.4.1.9.9.170.1.1.3 | Nodep2mpRadioTestGroup | |||
| 1.3.6.1.4.1.9.9.170.1.1.3.1 | Tablep2mpLoopbackTable | not-accessible | current | This table provides facilities to establish loopback points to exercise various sections of the hardware. |
| 1.3.6.1.4.1.9.9.170.1.1.3.1.1 | Rowp2mpLoopbackEntry | not-accessible | current | This represents one entry in the p2mpLoopbackTable. It is created when the managed system detects a propDocsWirelessMaclayer interface. The entry is removed wh… |
| 1.3.6.1.4.1.9.9.170.1.1.3.1.1.1 | Columnp2mpLocalLoopbackMode | read-write | current | This object is used to configure the system in loopback mode prior to executing some system diagnostic tests. The user selects the point in the system where th… |
| 1.3.6.1.4.1.9.9.170.1.1.3.1.1.2 | Columnp2mpLocalLoopbackAntenna | read-write | current | This object identifies the RF resource used for loopback testing. This object is not applicable for loopback testing when p2mpLocalLoopbackMode has a value of … |
| 1.3.6.1.4.1.9.9.170.1.1.3.1.1.3 | Columnp2mpLocalLoopbackChannel | read-write | current | This object identifies the channel being used to loopback the data. This object is not applicable for loopback testing when p2mpLocalLoopbackMode has a value o… |
| 1.3.6.1.4.1.9.9.170.1.1.4 | Nodep2mpLedGroup | |||
| 1.3.6.1.4.1.9.9.170.1.1.4.1 | Tablep2mpLedTable | not-accessible | current | Entity (Light emitting diode) LED information. For each LED on the entity, an entry will exist in this table, describing the location and current status of tha… |
| 1.3.6.1.4.1.9.9.170.1.1.4.1.1 | Rowp2mpLedEntry | not-accessible | current | An entry in the table, containing the LED information. The entPhysicalIndex identifies the entity on which the LED's are present. |
| 1.3.6.1.4.1.9.9.170.1.1.4.1.1.1 | Columnp2mpLedIndex | not-accessible | current | For a given entPhysicalIndex, this index value uniquely identifies an entry in the p2mpLedTable. |
| 1.3.6.1.4.1.9.9.170.1.1.4.1.1.2 | Columnp2mpLedType | read-only | current | Indicates the type or label of the LED. |
| 1.3.6.1.4.1.9.9.170.1.1.4.1.1.3 | Columnp2mpLedState | read-only | current | Indicates the state of the LED. |
| 1.3.6.1.4.1.9.9.170.1.2 | Nodep2mpRadioSuObjects | |||
| 1.3.6.1.4.1.9.9.170.1.2.1 | Tablep2mpSuRadioPhyTable | not-accessible | current | This table contains information about the currently configured physical layer interfaces in the subscriber unit. |
| 1.3.6.1.4.1.9.9.170.1.2.1.1 | Rowp2mpSuRadioPhyEntry | not-accessible | current | An entry containing the radio configuration information of the propDocsWirelessMaclayer interface in the subscriber unit. The entry is created when a propDocsW… |
| 1.3.6.1.4.1.9.9.170.1.2.1.1.1 | Columnp2mpSuTxMuteEnable | read-only | current | When true(1), this object indicates the subscriber unit transmission has been turned off for a duration indicated by p2mpSuTxMuteDuration. When false(2), this … |
| 1.3.6.1.4.1.9.9.170.1.2.1.1.2 | Columnp2mpSuTxMuteDuration | read-write | current | This object indicates the duration of time (in minutes) for which the subscriber transmission will be turned off. |
| 1.3.6.1.4.1.9.9.170.1.2.2 | Tablep2mpSuPowerScanTable | not-accessible | current | This table contains information about the receive power measured at the different possible center frequencies. |
| 1.3.6.1.4.1.9.9.170.1.2.2.1 | Rowp2mpSuPowerScanEntry | not-accessible | current | An entry containing the power related status information of the propDocsWirelessMaclayer interface in the subscriber unit. The entry is created when a propDocs… |
| 1.3.6.1.4.1.9.9.170.1.2.2.1.1 | Columnp2mpSuPowerScanIndex | not-accessible | current | For a given ifIndex, this index value uniquely identifies an entry in the p2mpSuPowerScanTable. |
| 1.3.6.1.4.1.9.9.170.1.2.2.1.2 | Columnp2mpSuCenterFrequency | read-only | current | This object indicates the frequency at which the receive power at the subscriber unit was measured. |
| 1.3.6.1.4.1.9.9.170.1.2.2.1.3 | Columnp2mpSuMeasuredPower | read-only | current | This object represents the power measured at the frequency indicated by p2mpSuCenterFrequency. |
| 1.3.6.1.4.1.9.9.170.1.3 | Nodep2mpRadioHeObjects | |||
| 1.3.6.1.4.1.9.9.170.1.3.1 | Tablep2mpHeAlcTable | not-accessible | current | This table contains Automatic Line Control (ALC) configuration information. It is supported at the head end only. |
| 1.3.6.1.4.1.9.9.170.1.3.1.1 | Rowp2mpHeAlcEntry | not-accessible | current | An entry containing the ALC configuration information the propDocsWirelessMaylayer interface at the head end. The entry is created when a propDocsWirelessMacla… |
| 1.3.6.1.4.1.9.9.170.1.3.1.1.1 | Columnp2mpHeAlcEnable | read-write | current | This object is used to enable/disable ALC at the Head End. A value of true(1), indicates that ALC is enabled. |
| 1.3.6.1.4.1.9.9.170.1.3.1.1.2 | Columnp2mpHeAlcInterval | read-write | current | This object represents the scheduling interval. It is the regular interval at which the ALC grant in Map is transmitted to the SU's |
| 1.3.6.1.4.1.9.9.170.1.3.1.1.3 | Columnp2mpHeAlcNumMiniSlots | read-write | current | This indicates the number of minislots within each grant. |
| 1.3.6.1.4.1.9.9.170.1.3.2 | Tablep2mpHeIntFreqTable | not-accessible | current | This table contains information about the state of the intermediate frequency subsystem in the radio system. This table is supported at the head end only. |
| 1.3.6.1.4.1.9.9.170.1.3.2.1 | Rowp2mpHeIntFreqEntry | not-accessible | current | The entry of this table is created when the managed system detects a propDocsWirelessMaclayer interface in the head end unit. The entry is deleted when the ass… |
| 1.3.6.1.4.1.9.9.170.1.3.2.1.1 | Columnp2mpHeIfTxOscState | read-only | current | This object indicates the state of the IF transmit oscillator. The oscillator must be in oscillatorOk(1) state for the system to function properly. |
| 1.3.6.1.4.1.9.9.170.1.3.2.1.2 | Columnp2mpHeIfRxOscState | read-only | current | This object indicates the state of the IF receive oscillator. The oscillator must be in oscillatorOk(1) state for the system to function properly. |
| 1.3.6.1.4.1.9.9.170.1.3.2.1.3 | Columnp2mpHeIfRefOscState | read-only | current | This object indicates the state of the IF reference oscillator. The oscillator must be in oscillatorOk(1) state for the system to function properly. |
| 1.3.6.1.4.1.9.9.170.1.3.2.1.4 | Columnp2mpHeIfInpFreq | read-only | current | This object represents the IF input frequency. |
| 1.3.6.1.4.1.9.9.170.1.3.2.1.5 | Columnp2mpHeIfOutFreq | read-only | current | This object represents the IF output frequency. |
| 1.3.6.1.4.1.9.9.170.1.3.2.1.6 | Columnp2mpHeTrapEnable | read-write | current | When set to true(1), this enables the notifications that are specific to the head end. When set to false(2), these notifications are disabled. |
| 1.3.6.1.4.1.9.9.170.1.4 | Nodep2mpRadioPhyConformance | |||
| 1.3.6.1.4.1.9.9.170.1.4.1 | Nodep2mpRadioPhyCompliances | |||
| 1.3.6.1.4.1.9.9.170.1.4.1.1 | Compliancep2mpRadioPhyCompliance | current | The compliance statement for devices that implement Point to Multipoint wireless interfaces compliant with the Cisco Systems Inc. specification. | |
| 1.3.6.1.4.1.9.9.170.1.4.2 | Nodep2mpRadioPhyGroups | |||
| 1.3.6.1.4.1.9.9.170.1.4.2.1 | Groupp2mpCommonRadioGroup | current | Mandatory group of objects implemented to configure a point to multipoint wireless radio. | |
| 1.3.6.1.4.1.9.9.170.1.4.2.2 | Groupp2mpCommonRfGroup | current | Mandatory group of objects implemented to tune the phy quality in a point to multipoint wireless radio. | |
| 1.3.6.1.4.1.9.9.170.1.4.2.3 | Groupp2mpCommonTestGroup | current | Mandatory group of objects implemented in the point to multi point wireless system for Testing the link. | |
| 1.3.6.1.4.1.9.9.170.1.4.2.5 | Groupp2mpRadioSuGroup | current | Group of objects implemented at the Subscriber unit. | |
| 1.3.6.1.4.1.9.9.170.1.4.2.6 | Groupp2mpRadioHeGroup | current | Group of objects implemented at the Head End. | |
| 1.3.6.1.4.1.9.9.170.1.4.2.8 | Groupp2mpRadioAntennaGroup | current | Group of objects implemented in the point to multi point wireless system for managing the antennas available in the system. | |
| 1.3.6.1.4.1.9.9.170.2 | Nodep2mpPhyMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.170.2.0 | Nodep2mpPhyMIBNotification | |||
| 1.3.6.1.4.1.9.9.170.2.0.1 | Notificationp2mpRadioPhyFailNotification | current | A p2mpRadioPhyFailNotification is sent if the value of p2mpLastPhyFailureType changes due to the new failure being detected in the Radio interface. | |
| 1.3.6.1.4.1.9.9.170.2.0.2 | Notificationp2mpTrapRfSupplyVoltage | current | The supply voltage to the RF resource has changed. The p2mpRfSupplyVoltageState specifies whether the supply voltage is in spec or not. | |
| 1.3.6.1.4.1.9.9.170.2.0.3 | Notificationp2mpTrapRfRxOsc | current | The RF receive frequency oscillator has changed state. The p2mpRfRxOscState specifies the current state of the oscillator. | |
| 1.3.6.1.4.1.9.9.170.2.0.4 | Notificationp2mpTrapRfTxOsc | current | The RF transmit frequency oscillator has changed state. The p2mpRfRxOscState specifies the state of the oscillator. | |
| 1.3.6.1.4.1.9.9.170.2.0.5 | Notificationp2mpTrapRfTemp | current | The temperature of the RF module identified by p2mpRfIndex has exceeded a defined reference. | |
| 1.3.6.1.4.1.9.9.170.2.0.6 | Notificationp2mpTrapRfCommLinkError | current | This trap indicates that the host and the IF module cannot communicate with the RF resource identified by p2mpRfType. | |
| 1.3.6.1.4.1.9.9.170.2.0.7 | Notificationp2mpTrapTxPower | current | This trap indicates that the transmit power for the RF resource identified by p2mpRfType exceeded a predefined threshold. | |
| 1.3.6.1.4.1.9.9.170.2.0.8 | Notificationp2mpTrapRfStatusChange | current | This trap indicates that the RF resource either came online(1) or went offline(2). | |
| 1.3.6.1.4.1.9.9.170.2.0.9 | Notificationp2mpTrapHeIfRxOsc | current | The IF receive frequency oscillator has changed state. | |
| 1.3.6.1.4.1.9.9.170.2.0.10 | Notificationp2mpTrapHeIfTxOsc | current | The IF transmit frequency oscillator has changed state. | |
| 1.3.6.1.4.1.9.9.170.2.0.11 | Notificationp2mpTrapHeIfExtRefOsc | current | The IF Reference Frequency oscillator has changed state. |