CISCO-WIRELESS-P2MP-RF-METRICS-MIB
100 objects
This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface specification.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-WIRELESS-TC-MIB | CwrCollectionAction CwrCollectionStatus CwrFixedPointPrecision CwrFixedPointScale CwrFixedPointValue CwrThreshLimitType CwrUpdateTime P2mpRadioSignalAttribute P2mpSnapshotAttribute |
| IF-MIB | ifIndex OwnerString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.180 | IdentityciscoWirelessRfMetricsMIB | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface specification. | ||
| 1.3.6.1.4.1.9.9.180.1 | Nodep2mpRadioHistoryGroup | |||
| 1.3.6.1.4.1.9.9.180.1.1 | Tablep2mpHistCtrlTable | not-accessible | current | This table contains information about histograms configured in hardware. |
| 1.3.6.1.4.1.9.9.180.1.1.1 | Rowp2mpHistCtrlEntry | not-accessible | current | This represents one entry in the p2mpHistCtrlTable. This table is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass. At the head end: Histograms can … |
| 1.3.6.1.4.1.9.9.180.1.1.1.1 | Columnp2mpHistSuMacAddress | not-accessible | current | This object is used to index this table. At the head end: When a histogram is created on a per subscriber unit basis, this object should reflect the MAC addres… |
| 1.3.6.1.4.1.9.9.180.1.1.1.2 | Columnp2mpHistClass | not-accessible | current | This objects used to index this table. It represents the attribute that is being histogrammed. |
| 1.3.6.1.4.1.9.9.180.1.1.1.3 | Columnp2mpHistSize | read-create | current | This object lets the user select the granularity of the histogram. The number of bins used for the capture in each category is hardware dependent. |
| 1.3.6.1.4.1.9.9.180.1.1.1.4 | Columnp2mpHistSumScale | read-only | current | This variable indicates the exponent to apply to the fixed-point values in the histogram summary table. |
| 1.3.6.1.4.1.9.9.180.1.1.1.5 | Columnp2mpHistSumPrecision | read-only | current | This variable indicates the number of decimal places used for precision when interpreting the fixed-point values in the histogram summary table. |
| 1.3.6.1.4.1.9.9.180.1.1.1.6 | Columnp2mpStartBinValue | read-create | current | This object represents the maximum of the values that will be collected in the first bin of the histogram. All values <= p2mpStartBinValue are kept in the firs… |
| 1.3.6.1.4.1.9.9.180.1.1.1.7 | Columnp2mpEndBinValue | read-create | current | This object represents the minimum of the values that will be collected in the last bin of the histogram. All values >= p2mpEndBinValue are kept in the last hi… |
| 1.3.6.1.4.1.9.9.180.1.1.1.8 | Columnp2mpCollDuration | read-create | current | This object specifies the duration for which this histogram must be accumulated. After successfully accumulating data for this amount of time the collection st… |
| 1.3.6.1.4.1.9.9.180.1.1.1.9 | Columnp2mpUpdateRate | read-create | current | This object represents rate at which snapshots of the histogram will be available. |
| 1.3.6.1.4.1.9.9.180.1.1.1.10 | Columnp2mpPeriodicSum | read-create | current | The histogram data is updated every p2mpUpdateRate seconds. When set to true(1), the latest histogram data set is summed with the previous histogram data set a… |
| 1.3.6.1.4.1.9.9.180.1.1.1.11 | Columnp2mpHistOwner | read-create | current | This object identifies management station that created this histogram specification. |
| 1.3.6.1.4.1.9.9.180.1.1.1.12 | Columnp2mpHistAction | read-create | current | This object represents the action to be carried out on this histogram specification. If a histogram has been successfully captured then it must be cleared befo… |
| 1.3.6.1.4.1.9.9.180.1.1.1.13 | Columnp2mpHistStatus | read-only | current | This object represents the current state of this histogram. Once the histogram collection is complete the status changes to statusCaptured and the data is avai… |
| 1.3.6.1.4.1.9.9.180.1.1.1.14 | Columnp2mpHistRowStatus | read-create | current | This object may be used to create or delete a histogram control specification. |
| 1.3.6.1.4.1.9.9.180.1.2 | Tablep2mpHistSummaryTable | not-accessible | current | This table contains histogram Summary collected based on the specifications in the p2mpHistCtrlTable. |
| 1.3.6.1.4.1.9.9.180.1.2.1 | Rowp2mpHistSummaryEntry | not-accessible | current | This represents one entry in the p2mpHistSummaryTable. At the head end: When viewing the summary of a histogram that was created for a specific subscriber unit… |
| 1.3.6.1.4.1.9.9.180.1.2.1.1 | Columnp2mpHistUpdateTime | read-only | current | This object represents the sysUpTime when this histogram was retrieved from hardware. |
| 1.3.6.1.4.1.9.9.180.1.2.1.2 | Columnp2mpHistMin | read-only | current | This object represents minimum value seen in this histogram. |
| 1.3.6.1.4.1.9.9.180.1.2.1.3 | Columnp2mpHistMax | read-only | current | This object represents maximum value seen in this histogram. |
| 1.3.6.1.4.1.9.9.180.1.2.1.4 | Columnp2mpHistMean | read-only | current | This object represents mean of the values in this histogram. |
| 1.3.6.1.4.1.9.9.180.1.3 | Tablep2mpHistDataTable | not-accessible | current | This table contains histogram values collected based on the specifications in the p2mpHistCtrlTable. |
| 1.3.6.1.4.1.9.9.180.1.3.1 | Rowp2mpHistDataEntry | not-accessible | current | This represents one entry in the p2mpHistDataTable. At the head end: When viewing the data of a histogram that was created for a specific subscriber unit, the … |
| 1.3.6.1.4.1.9.9.180.1.3.1.1 | Columnp2mpHistBinIndex | not-accessible | current | This object represents the histogram bin number for the value in p2mpValue. |
| 1.3.6.1.4.1.9.9.180.1.3.1.2 | Columnp2mpValue | read-only | current | This object represents the value in the histogram bin p2mpHistBinIndex. |
| 1.3.6.1.4.1.9.9.180.2 | Nodep2mpRadioTimelineGroup | |||
| 1.3.6.1.4.1.9.9.180.2.1 | Tablep2mpTlCtrlTable | not-accessible | current | This table contains information about timelines configured in hardware. When radio signal data is collected it will be stored in a buffer of size p2mpTlNumData… |
| 1.3.6.1.4.1.9.9.180.2.1.1 | Rowp2mpTlCtrlEntry | not-accessible | current | This represents one entry in the p2mpTlCtrlTable. This table is indexed by ifIndex, p2mpTlSuMacAddress, and p2mpTlClass. At the head end: Timelines can be crea… |
| 1.3.6.1.4.1.9.9.180.2.1.1.1 | Columnp2mpTlSuMacAddress | not-accessible | current | This object is used to index this table. At the head end: When a timeline is created on a per subscriber unit basis, this object should reflect the MAC address… |
| 1.3.6.1.4.1.9.9.180.2.1.1.2 | Columnp2mpTlClass | not-accessible | current | This object represents the attribute for which a timline capture is requested. When a timeline is requested p2mpBufSize worth of data will be captured. |
| 1.3.6.1.4.1.9.9.180.2.1.1.3 | Columnp2mpTlThreshAttribute | read-create | current | This object, along with p2mpTlThreshType, identifies the threshold in the p2mpThresholdTable responsible for trigerring this timeline. When this object's value… |
| 1.3.6.1.4.1.9.9.180.2.1.1.4 | Columnp2mpTlThreshType | read-create | current | This object, along with p2mpTlThreshAttribute, identifies the threshold in the p2mpThresholdTable responsible for trigerring this timeline. When this object's … |
| 1.3.6.1.4.1.9.9.180.2.1.1.5 | Columnp2mpTlNumDataValues | read-create | current | This object indicates the number of data values to be captured for this timeline. The captured data can be viewed by reading the p2mpTlDataTable. |
| 1.3.6.1.4.1.9.9.180.2.1.1.6 | Columnp2mpTlDataScale | read-only | current | This variable indicates the exponent to apply to the fixed-point values in the timeline data table. |
| 1.3.6.1.4.1.9.9.180.2.1.1.7 | Columnp2mpTlDataPrecision | read-only | current | This variable indicates the number of decimal places used for precision when interpreting the fixed-point values in the timeline data table. |
| 1.3.6.1.4.1.9.9.180.2.1.1.8 | Columnp2mpTlSamplePeriod | read-create | current | This lets the user specify the time in milliseconds between consecutive timeline samples. The special value of '0' indicates that the timeline will be sampled … |
| 1.3.6.1.4.1.9.9.180.2.1.1.9 | Columnp2mpTlAction | read-create | current | This object represents the action to be carried out on this timeline specification. If a timeline has been successfully captured then it must be cleared before… |
| 1.3.6.1.4.1.9.9.180.2.1.1.10 | Columnp2mpTlPostTrigBufMgmt | read-create | current | Once a trigger fires, this object determines which portion of the collected data to capture for use. If it is: preTrigger(1) : Then most of the data collected … |
| 1.3.6.1.4.1.9.9.180.2.1.1.11 | Columnp2mpTlOwner | read-create | current | This object identifies the management station that created this timeline specification. |
| 1.3.6.1.4.1.9.9.180.2.1.1.12 | Columnp2mpTlStatus | read-only | current | This object represents the current state of this timeline. Once the timeline collection is complete the status changes to statusCaptured and the data is availa… |
| 1.3.6.1.4.1.9.9.180.2.1.1.13 | Columnp2mpTlRowStatus | read-create | current | This object may be used to create or delete a timeline control specification. Once created data sampling starts based on the value of p2mpTlAction. |
| 1.3.6.1.4.1.9.9.180.2.2 | Tablep2mpTlSummaryTable | not-accessible | current | This table contains Timeline Summary collected based on the specifications in the p2mpTlCtrlTable. |
| 1.3.6.1.4.1.9.9.180.2.2.1 | Rowp2mpTlSummaryEntry | not-accessible | current | This represents one entry in the p2mpTlSummaryTable. At the head end: When viewing the summary of a timeline created for a specific subscriber unit, the user m… |
| 1.3.6.1.4.1.9.9.180.2.2.1.1 | Columnp2mpTlUpdateTime | read-only | current | This object represents the sysUpTime when this timeline capture was completed. |
| 1.3.6.1.4.1.9.9.180.2.2.1.2 | Columnp2mpTlNumValues | read-only | current | This object represents the number of values available in the timeline |
| 1.3.6.1.4.1.9.9.180.2.2.1.3 | Columnp2mpTlTriggerLoc | read-only | current | This object contains the value of p2mpTlValueIndex which represents the entry in the p2mpTlDataTable that caused the stop trigger to fire, thereby resulting in… |
| 1.3.6.1.4.1.9.9.180.2.3 | Tablep2mpTlDataTable | not-accessible | current | This table contains timeline values collected based on the specifications in the p2mpTlCtrlTable. |
| 1.3.6.1.4.1.9.9.180.2.3.1 | Rowp2mpTlDataEntry | not-accessible | current | This represents one entry in the p2mpTlDataTable. At the head end: When viewing the data of a timeline created for a specific subscriber unit, the user must sp… |
| 1.3.6.1.4.1.9.9.180.2.3.1.1 | Columnp2mpTlValueIndex | not-accessible | current | This object is the index into the timeline data. |
| 1.3.6.1.4.1.9.9.180.2.3.1.2 | Columnp2mpTlValue | read-only | current | This object represents the radio signal data sampled. |
| 1.3.6.1.4.1.9.9.180.3 | Nodep2mpRadioThresholdGroup | |||
| 1.3.6.1.4.1.9.9.180.3.1 | Tablep2mpThresholdTable | not-accessible | current | This table enables the user to establish thresholds for the radio signals analyzed on the radio interface. |
| 1.3.6.1.4.1.9.9.180.3.1.1 | Rowp2mpThresholdEntry | not-accessible | current | This represents one entry in the p2mpThresholdTable. At the head end: Thresholds can be created on each upstream channel either on a per channel or per subscri… |
| 1.3.6.1.4.1.9.9.180.3.1.1.1 | Columnp2mpThreshSuMacAddr | not-accessible | current | This object is used to index this table. At the head end: When a threshold is created on a per subscriber unit basis, this object should reflect the MAC addres… |
| 1.3.6.1.4.1.9.9.180.3.1.1.2 | Columnp2mpThreshAttribute | not-accessible | current | This represents the attribute of a radio link which needs to be thresholded. For each of these attributes, the p2mpThreshType identifies the type of change to … |
| 1.3.6.1.4.1.9.9.180.3.1.1.3 | Columnp2mpThreshType | not-accessible | current | This object represents the kind of change that needs to be monitored for the p2mpThreshAttribute. An event is generated when the specified condition is met. |
| 1.3.6.1.4.1.9.9.180.3.1.1.4 | Columnp2mpThreshValue | read-create | current | This object represents the value to be compared against. The p2mpThreshType determines the way in which it is used. It is used as follows: if p2mpThreshType is… |
| 1.3.6.1.4.1.9.9.180.3.1.1.5 | Columnp2mpThreshHysteresisTime | read-create | current | When radio signals oscillate around threshold values, they potentially flood the system with notifications. This object specifies the amount of time to wait be… |
| 1.3.6.1.4.1.9.9.180.3.1.1.6 | Columnp2mpThreshLimitTime | read-create | current | It is desirable to know when a radio signal has stabilized. This object specifies the amount of time that the radio signal should stay below the threshold afte… |
| 1.3.6.1.4.1.9.9.180.3.1.1.7 | Columnp2mpThreshRowStatus | read-create | current | This object represents the status of this threshold entry. It may be used to create a new threshold specification. For every p2mpThreshAttribute one threshold … |
| 1.3.6.1.4.1.9.9.180.3.2 | Nodep2mpRfMetricsMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.180.3.2.0 | Nodep2mpRfMetricsMIBNotification | |||
| 1.3.6.1.4.1.9.9.180.3.2.0.1 | Notificationp2mpTrapThresh | current | The radio subsystem generates this trap when a threshold crosses its specified limit. The parameters identify the following: p2mpThreshValue - The value that w… | |
| 1.3.6.1.4.1.9.9.180.4 | Nodep2mpRadioSnapshotGroup | |||
| 1.3.6.1.4.1.9.9.180.4.1 | Tablep2mpSnapshotCtrlTable | not-accessible | current | This table contains information about the snapshots configured in hardware. When data is collected it will be stored in p2mpSnapDataTable. Snapshots can only b… |
| 1.3.6.1.4.1.9.9.180.4.1.1 | Rowp2mpSnapshotCtrlEntry | not-accessible | current | This represents one entry in the p2mpSnapshotCntrlTable It is indexed by the ifIndex of the MAC layer (propDocsWirelessMaclayer) and p2mpSnapshotDspNum. |
| 1.3.6.1.4.1.9.9.180.4.1.1.1 | Columnp2mpSnapshotDspNum | not-accessible | current | This object represents the DSP on which the snapshot needs to be collected. |
| 1.3.6.1.4.1.9.9.180.4.1.1.2 | Columnp2mpSnapshotType | read-create | current | This identfies the set of radio signal attributes being monitored in this snapshot. |
| 1.3.6.1.4.1.9.9.180.4.1.1.3 | Columnp2mpSnapshotDataScale | read-only | current | This variable indicates the exponent to apply to the fixed-point values in the snapshot data table. |
| 1.3.6.1.4.1.9.9.180.4.1.1.4 | Columnp2mpSnapshotDataPrecision | read-only | current | This variable indicates the number of decimal places used for precision when interpreting the fixed-point values in the snapshot data table. |
| 1.3.6.1.4.1.9.9.180.4.1.1.5 | Columnp2mpSnapshotOwner | read-create | current | This object identifies management station that created this snapshot specification. |
| 1.3.6.1.4.1.9.9.180.4.1.1.6 | Columnp2mpSnapshotAction | read-create | current | This object represents the action to be carried out on this snapshot specification. If a snapshot has been successfully captured then it must be cleared before… |
| 1.3.6.1.4.1.9.9.180.4.1.1.7 | Columnp2mpSnapshotStatus | read-only | current | This object represents the current status of this snapshot specification. When the status in statusInProgress none of the snapshot parameters can be configured… |
| 1.3.6.1.4.1.9.9.180.4.1.1.8 | Columnp2mpSnapshotRowStatus | read-create | current | This object may be used to create or delete this snapshot specification. |
| 1.3.6.1.4.1.9.9.180.4.2 | Tablep2mpSnapSummaryTable | not-accessible | current | This table contains summary information for captured snapshots defined in p2mpSnapshotCtrlTable. |
| 1.3.6.1.4.1.9.9.180.4.2.1 | Rowp2mpSnapSummaryEntry | not-accessible | current | This represents one entry in the p2mpSnapSummaryTable. It is indexed by the ifIndex of the MAC layer (propDocsWirelessMaclayer) and p2mpSnapshotDspNum. |
| 1.3.6.1.4.1.9.9.180.4.2.1.2 | Columnp2mpSnapAttr1Id | read-only | current | This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the first attribute value. |
| 1.3.6.1.4.1.9.9.180.4.2.1.3 | Columnp2mpSnapAttr1Size | read-only | current | This object represents the number of values captured for the snapshot p2mpSnapAttr1Id. |
| 1.3.6.1.4.1.9.9.180.4.2.1.4 | Columnp2mpSnapAttr2Id | read-only | current | This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the second attribute value. |
| 1.3.6.1.4.1.9.9.180.4.2.1.5 | Columnp2mpSnapAttr2Size | read-only | current | This object represents the number of values captured for the snapshot p2mpSnapAttr2Id. |
| 1.3.6.1.4.1.9.9.180.4.2.1.6 | Columnp2mpSnapAttr3Id | read-only | current | This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the third attribute value. |
| 1.3.6.1.4.1.9.9.180.4.2.1.7 | Columnp2mpSnapAttr3Size | read-only | current | This object represents the number of values captured for the snapshot p2mpSnapAttr3Id. |
| 1.3.6.1.4.1.9.9.180.4.2.1.8 | Columnp2mpSnapAttr4Id | read-only | current | This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the fourth attribute value. |
| 1.3.6.1.4.1.9.9.180.4.2.1.9 | Columnp2mpSnapAttr4Size | read-only | current | This object represents the number of values captured for the snapshot p2mpSnapAttr4Id. |
| 1.3.6.1.4.1.9.9.180.4.3 | Tablep2mpSnapDataTable | not-accessible | current | This table contains snapshot values collected based on the specifications in the p2mpSnapshotCtrlTable. |
| 1.3.6.1.4.1.9.9.180.4.3.1 | Rowp2mpSnapDataEntry | not-accessible | current | This represents one entry in the P2mpSnapDataTable. It is indexed by ifIndex of the MAC layer (propDocsWirelessMaclayer), p2mpSnapshotIndex, and p2mpSnapValueI… |
| 1.3.6.1.4.1.9.9.180.4.3.1.1 | Columnp2mpSnapValueIndex | not-accessible | current | This object represents the snapshot entry value number. The hardware provides a maximum of 1024 data points for any snapshot attribute. Since we can capture a … |
| 1.3.6.1.4.1.9.9.180.4.3.1.2 | Columnp2mpRealPart | read-only | current | The data sample value. Real part. |
| 1.3.6.1.4.1.9.9.180.4.3.1.3 | Columnp2mpImaginaryPart | read-only | current | The data sample value. Imaginary part of the attribute is represented by a complex number. |
| 1.3.6.1.4.1.9.9.180.5 | Nodep2mpRadioRfConformance | |||
| 1.3.6.1.4.1.9.9.180.5.1 | Nodep2mpRadioRfCompliances | |||
| 1.3.6.1.4.1.9.9.180.5.1.1 | Compliancep2mpRadioRfCompliance | current | The compliance statement for devices that are Point to MultiPoint wireless interfaces. | |
| 1.3.6.1.4.1.9.9.180.5.2 | Nodep2mpRadioRfGroups | |||
| 1.3.6.1.4.1.9.9.180.5.2.1 | Groupp2mpComplianceHistogramGroup | current | Group of objects implemented in the point to multipoint wireless system for capturing histograms and snapshots of radio signal parameters on the radio interfac… | |
| 1.3.6.1.4.1.9.9.180.5.2.2 | Groupp2mpComplianceThresholdGroup | current | Group of objects implemented in the point to multipoint wireless system to set thresholds on the radio interface. | |
| 1.3.6.1.4.1.9.9.180.5.2.3 | Groupp2mpComplianceTimelineGroup | current | Group of objects implemented in the point to point wireless system for establishing thresholds and capturing timeline data. | |
| 1.3.6.1.4.1.9.9.180.5.2.4 | Groupp2mpComplianceSnapshotGroup | current | Group of objects implemented in the point to multi point wireless system for capturing snapshots of various parameters on the radio interface. |