CISCO-XGCP-MIB
123 objects
This MIB is an enhancement for existing XGCP-MIB. xGCP is a set of protocols, for example SGCP (Simple Gateway Control Protocol) and MGCP (Media Gateway Control Protocol), which are designed as a control protocol within a distributed system that appears to the outside as a single VoIP/VoATM gateway. This system is composed of a call agent (or MGC, Media Gateway Controller) and of a set of 'media gateways' that perform the conversion of media signals between circuits and packets. In the xGCP model, the gateways focus on the audio signal translation function, while the call agent handles the signaling and call processing functions. Examples of Gateway Control Protocols are: * Simple Gateway Control Protocol (SGCP) * Media Gateway Control Protocol (MGCP) xGCP assumes a connection model where the basic constructs are: Endpoints : sources or sinks of data that could be physical or virtual. Connections : an association between two or more endpoints with the purpose of transmitting data between these endpoints. Once this association is established for both endpoints, data transfer between these endpoints can take place. Connections are grouped in calls. One or more connections can belong to one call. Connections and calls are set up at the initiative of one or several call agents. Terminologies used: AAL : ATM Adaptation Layer AUCX : Audit Connection Command used by the MGC to find out the status of a given gateway connection. AUEP : Audit Endpoint Command used by the MGC to find out the status of a given endpoint. CCAPI : Call Control Application Program Interface. CID : Channel Identifier CRCX : Connection Command from a MGC to request the gateway MG : Media Gateway MGC : Media Gateway Controller DLCX : Delete Command. This command can be initiated by either the MGC or gateway. GSM : Global System for Mobile Communications GW : Gateway. HP : Hairpin MDCX : Modify Connection Command from a MGC to request the gateway NSE : Negative Stuffing Event NTFY : A Notify Command sent from a gateway to a MGC in response to a RQNT command. PSTN : Public Switched Telephone Network RQNT : Request To Nofity Command from a MGC to request the gateway to provide a notification for configuration changes. RSIP : Restart in Progress Command. This command can be initiated by either the MGC or gateway. SPRT : Simple Packet Relay Transport SSE : Silicon Switching Engine TDM : Time Division Multiplexing TGW : Target Gateway TWC : Three Way Calling VCCI : Virtual Circuit Connection Identifier VMG : Virtual Media Gateway. It is a logical representation of a module (or a set of modules) that has MG functionality. There could be multiple VMGs in a device. VoAAL2 : Voice over AAL2
Imported Objects
| CISCO-MEDIA-GATEWAY-MIB | CCallControlProfileIndexOrZero cmgwIndex |
| CISCO-MGC-MIB | CMgcGroupIndexOrZero |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoPort |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.318 | IdentityciscoXgcpMIB | This MIB is an enhancement for existing XGCP-MIB. xGCP is a set of protocols, for example SGCP (Simple Gateway Control Protocol) and MGCP (Media Gateway Contro… | ||
| 1.3.6.1.4.1.9.9.318.0 | NodecXgcpNotifications | |||
| 1.3.6.1.4.1.9.9.318.1 | NodecXgcpObjects | |||
| 1.3.6.1.4.1.9.9.318.1.1 | NodecXgcpMgcCfg | |||
| 1.3.6.1.4.1.9.9.318.1.1.1 | TablecXgcpMgcConfigTable | not-accessible | current | This is a table which is used to provision a MGC or MGC group for a MG. Each entry corresponds to a MGC or a MGC group for a single MG. |
| 1.3.6.1.4.1.9.9.318.1.1.1.1 | RowcXgcpMgcConfigEntry | not-accessible | current | Each row corresponds to a MGC or a group of MGCs for a media gateway. |
| 1.3.6.1.4.1.9.9.318.1.1.1.1.1 | ColumncXgcpMgcConfigMgcGrpNum | read-write | current | This object specifies which MGC Redundant Group will be used in XGCP. The value of this object refers to the object cMgcGrpIndex from MGC Redundant Group Table… |
| 1.3.6.1.4.1.9.9.318.1.1.1.1.2 | ColumncXgcpMgcConfigAddrType | read-write | current | This object specifies the address type of the MGC (object cXgcpMgcConfigAddress), either ipv4 or ipv6. |
| 1.3.6.1.4.1.9.9.318.1.1.1.1.3 | ColumncXgcpMgcConfigAddress | read-write | current | This object specifies the address of the MGC the gateway used to communicate with in call setup. This object cXgcpMgcConfigAddress and object cXgcpMgcConfigMgc… |
| 1.3.6.1.4.1.9.9.318.1.1.1.1.4 | ColumncXgcpMgcConfigProtocolIndex | read-write | current | This object specifies which protocol that the MG should use to communicate with the MGC when it try to set up the call. The value of this object is the same as… |
| 1.3.6.1.4.1.9.9.318.1.1.1.1.5 | ColumncXgcpMgcConfigGatewayUdpPort | read-only | current | The UDP port of the MG which is used to communicate with call agent in MGCP. |
| 1.3.6.1.4.1.9.9.318.1.2 | NodecXgcpMediaGw | |||
| 1.3.6.1.4.1.9.9.318.1.2.1 | TablecXgcpMediaGwTable | not-accessible | current | This table is used to provision xGCP configuration in a MG. |
| 1.3.6.1.4.1.9.9.318.1.2.1.1 | RowcXgcpMediaGwEntry | not-accessible | current | Each entry represents the xGCP attributes for a media gateway. An entry is created when the system detects the XGCP stack at system start-up. Accordingly, the … |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.1 | ColumncXgcpMediaGwRequestTimeOut | read-write | current | The request timeout is the period that the XGCP protocol waits before retransmitting an unacknowledged message. It is the responsibility of the requesting enti… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.2 | ColumncXgcpMediaGwRequestRetries | read-write | current | This object specifies the number of retries for a request that exceeds timeout without acknowledge before it tries to connect to another MGC. |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.3 | ColumncXgcpMediaGwRequestRetryMethod | read-write | current | This object specifies command retry method. |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.4 | ColumncXgcpMediaGwMaxExpTimeout | read-write | current | This object specifies the maximum timeout for exponential command retry by the media gateway. |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.5 | ColumncXgcpMediaGwRestartMwd | read-write | current | The maximum waiting delay (MWD) timeout value is used for the media gateway to send the first Restart In Progress to the MGC. When a gateway is powered on, it … |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.6 | ColumncXgcpMediaGwRestartDelay | read-write | current | This object specifies the Restart Delay Timeout for the restart process for a gateway to send out RestartInProgress when it is powered on or been reset. The pu… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.7 | ColumncXgcpMediaGwDefaultPackage | read-write | current | This object represents the default capability package supported in the gateway. packageDC ( 1) - Don't Care package packageG ( 2) - Generic package packageD ( … |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.8 | ColumncXgcpMediaGwSupportedPackages | read-only | current | This object represents the bit map of MGCP supported packages. Bit 0 - Not Found Bit 1 - Package DC (Don't care package) Bit 2 - Package G (Generic package) Bi… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.9 | ColumncXgcpMediaGwSimpleSdpEnabled | read-write | current | This object is used to enable/disable building of s, t, o lines in SDP message. where o field indicates the owner/creator and session identifier s field indica… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.10 | ColumncXgcpMediaGwAckSdpEnabled | read-write | current | This object specifies the ACK SDP is enabled or not. If this object is set to 'true', then it sends ADP with ACK when CODEC or reportable NTE delta changed, or… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.11 | ColumncXgcpMediaGwUndottedNotation | read-write | current | This object enables/disables the undotted notation for CODEC. This object is used to set CODEC notation to 'dotted' or 'undotted' in SDP between the gateway an… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.12 | ColumncXgcpMediaGwQuarantineProcess | read-write | current | This object is used to determine how to handle persistent events. If this object is set to 'true', the quarantined events should be processed, otherwise the qu… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.13 | ColumncXgcpMediaGwQuarantineLoop | read-write | current | This object controls the default quarantine mode. If this object is set to 'true', the default quarantine mode is 'loop', not 'step'. When this object is set t… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.14 | ColumncXgcpMediaGwQuarantinePersist | read-write | current | This object specifies how the persist events will be handled in quarantine processing. If this object is set to 'true', the persistent events bypass quarantine… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.15 | ColumncXgcpMediaGwPiggybackMsg | read-write | current | This object enables/disables the piggyback message generating. If the piggyback message generating is enabled, a call agent can send several MGCP messages in t… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.16 | ColumncXgcpMediaGwMaxMsgSize | read-write | current | This object specifies the maximum allowed xGCP message size which is used for checking if the size will be supported by the call agent via (AuditEndPoint) resp… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.17 | ColumncXgcpMediaGwLastFailMgcAddrType | read-only | current | This object indicates the address type, either IPv4 or IPv6, of cxeCallCtrlLastFailMgcAddr. |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.18 | ColumncXgcpMediaGwLastFailMgcAddr | read-only | current | This object indicates the address of last MGC which the media gateway had tried to communicate with but failed. |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.19 | ColumncXgcpMediaGwDtmfRelay | read-write | current | When this object is set to 'true', the digits will be sent as peer-to-peer packet in the bearer. When this object is set to 'false', the digits will be sent as… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.20 | ColumncXgcpMediaGwCaleaEnabled | read-write | current | CALEA, Communication Assistance for Law Enforcement Act, is a feature that allows for a lawful intercept of a call details and call contents originating or ter… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.21 | ColumncXgcpMediaGwConfiguredPackages | read-write | current | This object represents the bit map of MGCP packages configured and supported in the gateway. Bit 0 - Not Found Bit 1 - Package DC (Don't care package) Bit 2 - … |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.22 | ColumncXgcpMediaGwConnOosRsipBehavior | read-write | current | This object specifies the RSIP behavior of the endpoints with active calls (in connections) when they are forced to out-of-service. The following values can be… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.23 | ColumncXgcpMediaGwLongDurTimer | read-write | current | This object specifies the long duration timer. It is used to define the long duration of a connection. Once the timer expires, a notification will be sent to t… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.24 | ColumncXgcpMediaGwProfile | read-write | current | This object specifies the XGCP profile in the media gateway level. The value of 0 means the XGCP default profile is used in the media gateway level. If the val… |
| 1.3.6.1.4.1.9.9.318.1.2.1.1.25 | ColumncXgcpMediaGwAnnexabSdpEnabled | read-write | current | This object specifies the format for parsing or generating G.723 or G.729 codec in SDP message for the media gateway. The value 'true' means using Annex A and … |
| 1.3.6.1.4.1.9.9.318.1.3 | NodecXgcpStats | |||
| 1.3.6.1.4.1.9.9.318.1.3.1 | TablecXgcpMsgStatsTable | not-accessible | current | This table contains statistical information on the transmitted and received network messages between MG and MGC, since the MG reset. The entries in this table … |
| 1.3.6.1.4.1.9.9.318.1.3.1.1 | RowcXgcpMsgStatsEntry | not-accessible | current | This entry contains the statistical information on the received and transmitted network messages with the associated MGC address. |
| 1.3.6.1.4.1.9.9.318.1.3.1.1.1 | ColumncXgcpMsgStatsIndex | not-accessible | current | A unique index to identify a specific MGC address for tracking xGCP statistics between MGC and MG. |
| 1.3.6.1.4.1.9.9.318.1.3.1.1.2 | ColumncXgcpMsgStatsMgcIPAddressType | read-only | current | This object indicates the address type of cXgcpMsgStatsMgcIPAddress. |
| 1.3.6.1.4.1.9.9.318.1.3.1.1.3 | ColumncXgcpMsgStatsMgcIPAddress | read-only | current | This object indicates IP address of the MGC. The IP address should be unique on the table. |
| 1.3.6.1.4.1.9.9.318.1.3.1.1.4 | ColumncXgcpMsgStatsSuccessMessages | read-only | current | This object indicates the number of successful messages that communicate with the MGC on that IP address. Successful messages apply to both transmit and receiv… |
| 1.3.6.1.4.1.9.9.318.1.3.1.1.5 | ColumncXgcpMsgStatsFailMessages | read-only | current | This object indicates the number of failed messages that communicate with the MGC on that IP address. Failed messages apply to both transmit and receive messag… |
| 1.3.6.1.4.1.9.9.318.1.3.1.1.6 | ColumncXgcpMsgStatsIncompleteMessages | read-only | current | This object indicates the number of transmit messages for which time out occurred while waiting for an ACK. |
| 1.3.6.1.4.1.9.9.318.1.3.2 | TablecXgcpStatsTable | not-accessible | current | This table contains information on the received and transmitted network messages, based on each message type, for all the VMGs present in the device. The table… |
| 1.3.6.1.4.1.9.9.318.1.3.2.1 | RowcXgcpStatsEntry | not-accessible | current | This entry contains the information on the associated VMG's received and transmitted network messages. The value of each statistical object is incremented when… |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.1 | ColumncXgcpStatsUdpRxPkts | read-only | current | Number of UDP packets received from all the MGCs. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.2 | ColumncXgcpStatsUdpTxPkts | read-only | current | Number of UDP packets sent to all the MGCs. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.3 | ColumncXgcpStatsUnRecRxPkts | read-only | current | Number of unrecognized UDP packets received from all the MGCs. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.4 | ColumncXgcpStatsMsgParsingErrors | read-only | current | Number of messages with parsing errors received from all the MGCs. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.5 | ColumncXgcpStatsDupAckTxMsgs | read-only | current | Number of duplicate response messages sent to the MGCs. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.6 | ColumncXgcpStatsInvalidVerCount | read-only | current | Number of invalid protocol version messages received from all the MGCs. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.7 | ColumncXgcpStatsUnknownMgcRxPkts | read-only | current | Number of unknown message packets received from all the MGCs. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.8 | ColumncXgcpStatsAckTxMsgs | read-only | current | Number of acknowledgment messages sent by the MG. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.9 | ColumncXgcpStatsNackTxMsgs | read-only | current | Number of negative acknowledgment messages sent by the MG. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.10 | ColumncXgcpStatsAckRxMsgs | read-only | current | Number of acknowledgment messages received by the MG. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.11 | ColumncXgcpStatsNackRxMsgs | read-only | current | Number of negative acknowledgment messages received by the MG. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.12 | ColumncXgcpStatsRxCrcxs | read-only | current | Number of CRCX messages received by the MG. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.13 | ColumncXgcpStatsRxSuccCrcxs | read-only | current | Number of CRCX messages received, that were successful. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.14 | ColumncXgcpStatsRxFailCrcxs | read-only | current | Number of CRCX messages received, that failed. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.15 | ColumncXgcpStatsRxDlcxs | read-only | current | Number of DLCX messages received. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.16 | ColumncXgcpStatsRxSuccDlcxs | read-only | current | Number of DLCX messages received, that were successful. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.17 | ColumncXgcpStatsRxFailDlcxs | read-only | current | Number of DLCX messages received, that failed. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.18 | ColumncXgcpStatsTxDlcxs | read-only | current | Number of DLCX messages sent. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.19 | ColumncXgcpStatsTxSuccDlcxs | read-only | current | Number of DLCX messages sent, that were successful. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.20 | ColumncXgcpStatsTxFailDlcxs | read-only | current | Number of DLCX messages sent, that failed. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.21 | ColumncXgcpStatsRxMdcxs | read-only | current | Number of MDCX messages received. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.22 | ColumncXgcpStatsRxSuccMdcxs | read-only | current | Number of MDCX messages received, that were successful. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.23 | ColumncXgcpStatsRxFailMdcxs | read-only | current | Number of MDCX messages received, that failed. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.24 | ColumncXgcpStatsRxRqnts | read-only | current | Number of RQNT messages received. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.25 | ColumncXgcpStatsRxSuccRqnts | read-only | current | Number of RQNT messages received, that were successful. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.26 | ColumncXgcpStatsRxFailRqnts | read-only | current | Number of RQNT messages received, that failed. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.27 | ColumncXgcpStatsRxAucxs | read-only | current | Number of AUCX messages received. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.28 | ColumncXgcpStatsRxSuccAucxs | read-only | current | Number of AUCX messages received, that were successful. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.29 | ColumncXgcpStatsRxFailAucxs | read-only | current | Number of AUCX messages received, that failed. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.30 | ColumncXgcpStatsRxAueps | read-only | current | Number of AUEP messages received. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.31 | ColumncXgcpStatsRxSuccAueps | read-only | current | Number of AUEP messages received, that were successful. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.32 | ColumncXgcpStatsRxFailAueps | read-only | current | Number of AUEP messages received, that failed. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.33 | ColumncXgcpStatsTxRsips | read-only | current | Number of RSIP messages sent. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.34 | ColumncXgcpStatsTxSuccRsips | read-only | current | Number of RSIP messages sent, that were successful. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.35 | ColumncXgcpStatsTxFailRsips | read-only | current | Number of RSIP messages sent, that failed. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.36 | ColumncXgcpStatsTxNotifies | read-only | current | Number of NTFY messages sent. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.37 | ColumncXgcpStatsTxSuccNotifies | read-only | current | Number of NTFY messages sent, that were successful. |
| 1.3.6.1.4.1.9.9.318.1.3.2.1.38 | ColumncXgcpStatsTxFailNotifies | read-only | current | Number of NTFY messages sent, that failed. |
| 1.3.6.1.4.1.9.9.318.1.4 | NodecXgcpConnection | |||
| 1.3.6.1.4.1.9.9.318.1.4.1 | TablecXgcpConnectionTable | not-accessible | current | This table contains information on the active connections of all the VMGs present in the device. A MG may have zero or more number of calls at any given time. … |
| 1.3.6.1.4.1.9.9.318.1.4.1.1 | RowcXgcpConnectionEntry | not-accessible | current | This entry contains the information about an active connection. |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.1 | ColumncXgcpConnId | not-accessible | current | Connection ID generated by the gateway and sent in the ACK message. |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.2 | ColumncXgcpConnEndPoint | read-only | current | The physical or virtual entity that acts as a source or sink of data in the MG is called an endpoint. Every end point in the MG is assigned a textual name by t… |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.3 | ColumncXgcpConnCallId | read-only | current | Call ID associated with this connection. Call ID is a parameter that identifies the call to which this connection belongs to. A call ID is unique within a VMG … |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.4 | ColumncXgcpConnLocalUdpPort | read-only | current | The local UDP port used for the connection. |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.5 | ColumncXgcpConnRemoteUdpPort | read-only | current | The remote UDP port used for the connection. |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.6 | ColumncXgcpConnMode | read-only | current | Represents possible MG connection modes. invalid - Invalid value for mode sendOnly - The GW should only send packets recvOnly - The GW should only receive pack… |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.7 | ColumncXgcpConnVccId | read-only | current | VCCI used for the VoAAL2 call. The object should have a non-zero value only if the associated call is of VoAAL2 type. For all other calls the value should be '… |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.8 | ColumncXgcpConnChannelId | read-only | current | CID used for the VoAAL2 call. The object should have a non-zero value only if the associated call is of VoAAL2 type. For all other calls the value should be '0… |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.9 | ColumncXgcpConnCallState | read-only | current | Represents possible MG call states. idle - Idle setting - Incoming call from PSTN connecting - CRCX message received conferencing - Call connected, await conf … |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.10 | ColumncXgcpConnCodec | read-only | current | Specifies the codec type to be used with the Call. The following codec types are defined: notApplicable - no Codec Type is defined g711ulaw - G.711 mu-law g711… |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.11 | ColumncXgcpConnLastSuccEvent | read-only | current | A call event is defined as something that happens to a call at a given time. This object contains the latest MG call event that was successful. |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.12 | ColumncXgcpConnLastSuccIntEvent | read-only | current | This object contains the latest MG internal call event that was successful. |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.13 | ColumncXgcpConnLastFailedEvent | read-only | current | This object contains the latest MG call event that was failed. |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.14 | ColumncXgcpConnLastReqEvent | read-only | current | This object contains the latest requested MG call event. |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.15 | ColumncXgcpConnEventResult | read-only | current | Represents possible MG call event results. normalOk - Normal event processed OK invalidOk - Invalid event processed OK callRecordReleased - The call record is … |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.16 | ColumncXgcpConnEncrSuite | read-only | current | Specifies what type of encryption suite is used to encode the information sent through this connection. none - No Encryption suite is used aes128Cm - AES-128 c… |
| 1.3.6.1.4.1.9.9.318.2 | NodecXgcpMIBConformance | |||
| 1.3.6.1.4.1.9.9.318.2.1 | NodecXgcpMIBCompliances | |||
| 1.3.6.1.4.1.9.9.318.2.1.1 | ComplianceciscoXgcpMIBCompliance | deprecated | The compliance statement for the SNMPv2 entities which implement XGCP. This has been replaced by ciscoXgcpMIBComplianceRev1. | |
| 1.3.6.1.4.1.9.9.318.2.1.2 | ComplianceciscoXgcpMIBComplianceRev1 | deprecated | The compliance statement for the SNMPv2 entities which implement CISCO-XGCP-MIB. | |
| 1.3.6.1.4.1.9.9.318.2.1.3 | ComplianceciscoXgcpMIBComplianceRev2 | deprecated | The compliance statement for the SNMPv2 entities which implement CISCO-XGCP-MIB. | |
| 1.3.6.1.4.1.9.9.318.2.1.4 | ComplianceciscoXgcpMIBComplianceRev3 | current | The compliance statement for the SNMPv2 entities which implement CISCO-XGCP-MIB. | |
| 1.3.6.1.4.1.9.9.318.2.2 | NodecXgcpMIBGroups | |||
| 1.3.6.1.4.1.9.9.318.2.2.1 | GroupcXgcpMgcConfigGroup | current | This group contains the MGC objects for SGCP/MGCP that the MG connects to. | |
| 1.3.6.1.4.1.9.9.318.2.2.2 | GroupcXgcpMediaGwGroup | current | This group contains core objects for SGCP/MGCP on the MG. | |
| 1.3.6.1.4.1.9.9.318.2.2.3 | GroupcXgcpMsgStatsGroup | current | This group contains statistics objects for SGCP/MGCP on the MGC and the MG. | |
| 1.3.6.1.4.1.9.9.318.2.2.4 | GroupcXgcpMediaGwGroupSup1 | deprecated | This group contains supplimentary objects for XGCP extended provisioning in the MG. | |
| 1.3.6.1.4.1.9.9.318.2.2.5 | GroupcXgcpMediaGwGroupSup2 | current | This group contains supplimentary objects for XGCP extended provisioning in the MG. | |
| 1.3.6.1.4.1.9.9.318.2.2.6 | GroupcXgcpStatsGroup | current | This group contains the received and transmitted network messages for every virtual MG present in the managed system. | |
| 1.3.6.1.4.1.9.9.318.2.2.7 | GroupcXgcpConnectionGroup | current | This group contains active connections information that are controlled by the Gateway Control Protocol. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CXgcpCallEvent | INTEGER { ack (0), createConn (1), deleteConn (2), modifyConn (3), notifyReq (4), alert (5), callConnect (6), confReady (7), confDestroy (8), callDisconnect (9), callProceed (10), offHook (11), onHook (12), mediaEvent (13), intEven (14), dissocConf (15), assocConf (16), modifyDone (17), voiceModeDone (18), nse (19), callHandoff (20), babblerAuditResp (21) } | current | Represents possible Gateway Control Protocol Call Events. ack - Acknowledgement msg createConn - Create connection msg deleteConn - Delete connection msg modifyConn - Modify connection msg notifyReq - Notify request msg… |
| CXgcpRetryMethod | INTEGER { neverResetTimer (1), resetTimerForNewMgc (2), resetTimerForNewAddr (3), resetTimerForEndpoint (4) } | current | Method of resetting retry timer in XGCP. When media gateway re-try to communication to a call agent, the timeout for each re-try is doubled. Example: re-try time is 3 initial timeout is 2 (any unit) maximum possible ret… |