CISCOSB-CDP-MIB
77 objects
The private MIB module definition for CDP protocol.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.0.224 | NotificationrlCdpLogMismatchDuplexTrap | current | Warning trap indicating that duplex mismatch has been detected by CDP | |
| 1.3.6.1.4.1.9.6.1.101.0.225 | NotificationrlCdpLogMismatchVoiceVlanTrap | current | Warning trap indicating that voice vlan mismatch has been detected by CDP | |
| 1.3.6.1.4.1.9.6.1.101.0.226 | NotificationrlCdpLogMismatchNativeVlanTrap | current | Warning trap indicating that native vlan mismatch has been detected by CDP | |
| 1.3.6.1.4.1.9.6.1.101.137 | IdentityrlCdp | The private MIB module definition for CDP protocol. | ||
| 1.3.6.1.4.1.9.6.1.101.137.1 | ScalarrlCdpVersionAdvertised | read-write | current | Specifies the verison of sent CDP packets |
| 1.3.6.1.4.1.9.6.1.101.137.2 | ScalarrlCdpSourceInterface | read-write | current | Specifices the CDP source-interface, which the IP address advertised into TLV is accoding to this source-interface instead of the outgoing interface. value of … |
| 1.3.6.1.4.1.9.6.1.101.137.3 | ScalarrlCdpLogMismatchDuplexEnable | read-write | current | Enable logging messages when detecting mishmatch between advertised and received duplex mode. To enable loging on specific interface set the corresponing bit. |
| 1.3.6.1.4.1.9.6.1.101.137.4 | TablerlCdpCountersTable | not-accessible | current | This table contains all CDP counters values, indexed by counter name |
| 1.3.6.1.4.1.9.6.1.101.137.4.1 | RowrlCdpCountersEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.9.6.1.101.137.4.1.1 | ColumnrlCdpCountersName | not-accessible | current | counter name used as key for counters table |
| 1.3.6.1.4.1.9.6.1.101.137.4.1.2 | ColumnrlCdpCountersValue | read-only | current | the value of the counter name specisifed by rlCdpCountersName, unsuppo will have no entry in the tab. |
| 1.3.6.1.4.1.9.6.1.101.137.5 | ScalarrlCdpCountersClear | read-write | current | By setting the MIB to True, all error and traffic counters are set to zero. |
| 1.3.6.1.4.1.9.6.1.101.137.6 | ScalarrlCdpCacheClear | read-write | current | By setting the MIB to True, all entries from the cdp cache table is deleted. |
| 1.3.6.1.4.1.9.6.1.101.137.7 | ScalarrlCdpVoiceVlanId | read-write | obsolete | voice vlan Id, used as the Appliance Vlan-Id TLV |
| 1.3.6.1.4.1.9.6.1.101.137.8 | TablerlCdpCacheTable | not-accessible | current | The (conceptual) table contains externtion for the cdpCache table. indexed by cdpCacheEntry. |
| 1.3.6.1.4.1.9.6.1.101.137.8.1 | RowrlCdpCacheEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.9.6.1.101.137.8.1.1 | ColumnrlCdpCacheVersionExt | read-only | current | This field contains the extention of the cdpCacheVersion field in the cdpCache table. In case the neighbour advertised the SW TLV as a string with length large… |
| 1.3.6.1.4.1.9.6.1.101.137.8.1.2 | ColumnrlCdpCacheTimeToLive | read-only | current | This field indicates the time remains in seconds till the entry should be expried. |
| 1.3.6.1.4.1.9.6.1.101.137.8.1.3 | ColumnrlCdpCacheCdpVersion | read-only | current | This field indicates the cdp version that was reported in the most recent CDP message. |
| 1.3.6.1.4.1.9.6.1.101.137.9 | ScalarrlCdpPduAction | read-write | current | Defines CDP packets handling when CDP is globally disabled. |
| 1.3.6.1.4.1.9.6.1.101.137.10 | ScalarrlCdpLogMismatchVoiceVlanEnable | read-write | current | Enable logging messages when detecting mishmatch between advertised and received voice VLAN. To enable logging on specific interface set the corresponing bit. |
| 1.3.6.1.4.1.9.6.1.101.137.11 | ScalarrlCdpLogMismatchNativeVlanEnable | read-write | current | Enable logging messages when detecting mishmatch between advertised and received native VLAN. To enable loging on specific interface set the corresponing bit. |
| 1.3.6.1.4.1.9.6.1.101.137.12 | TablerlCdpSecondaryCacheTable | not-accessible | current | The (conceptual) table contains partial information from cdpCache table. indexed by rlCdpSecondaryCacheEntry. |
| 1.3.6.1.4.1.9.6.1.101.137.12.1 | RowrlCdpSecondaryCacheEntry | not-accessible | current | An entry (conceptual row) in the rlCdpSecondaryCacheTable, containing partial information received via CDP on one interface from one device. Entries appear whe… |
| 1.3.6.1.4.1.9.6.1.101.137.12.1.3 | ColumnrlCdpSecondaryCacheMacAddress | read-only | current | The MAC address of the neighbor. |
| 1.3.6.1.4.1.9.6.1.101.137.12.1.4 | ColumnrlCdpSecondaryCachePlatform | read-only | current | The Device's Hardware Platform prefix, as reported in the most recent CDP message. The zero-length string indicates that no Platform field (TLV) was reported i… |
| 1.3.6.1.4.1.9.6.1.101.137.12.1.5 | ColumnrlCdpSecondaryCacheCapabilities | read-only | current | The Device's Functional Capabilities as reported in the most recent CDP message. |
| 1.3.6.1.4.1.9.6.1.101.137.12.1.6 | ColumnrlCdpSecondaryCacheVoiceVlanID | read-only | current | The remote device's VoIP VLAN ID, as reported in the most recent CDP message. This object is not instantiated if no Appliance VLAN-ID field (TLV) was reported … |
| 1.3.6.1.4.1.9.6.1.101.137.12.1.7 | ColumnrlCdpSecondaryCacheTimeToLive | read-only | current | This field indicates the number of seconds till the entry is expried. |
| 1.3.6.1.4.1.9.6.1.101.137.13 | ScalarrlCdpGlobalLogMismatchDuplexEnable | read-write | current | Globally enable/disable logging messages when detecting mishmatch between advertised and received duplex mode. |
| 1.3.6.1.4.1.9.6.1.101.137.14 | ScalarrlCdpGlobalLogMismatchVoiceVlanEnable | read-write | current | Globally enable/disable logging messages when detecting mishmatch between advertised and received voice VLAN. |
| 1.3.6.1.4.1.9.6.1.101.137.15 | ScalarrlCdpGlobalLogMismatchNativeVlanEnable | read-write | current | Globally enable/disable logging messages when detecting mishmatch between advertised and received native VLAN. |
| 1.3.6.1.4.1.9.6.1.101.137.16 | TablerlCdpTlvTable | not-accessible | current | The (conceptual) table contains the local advertised information. indexed by rlCdpTlvEntry. |
| 1.3.6.1.4.1.9.6.1.101.137.16.1 | RowrlCdpTlvEntry | not-accessible | current | An entry (conceptual row) in the rlCdpTlvTable, containing local information advertised by CDP on one interface. Entries are available only when CDP is globall… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.1 | ColumnrlCdpTlvIfIndex | not-accessible | current | The ifIndex value of the local interface. A value of zero is used to access TLVs which do not changed between interfaces. |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.2 | ColumnrlCdpTlvDeviceIdFormat | read-only | current | An indication of the format of Device-Id contained in the corresponding instance of rlCdpTlvDeviceId. serialNumber(1) indicates that the value of rlCdpTlvDevic… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.3 | ColumnrlCdpTlvDeviceId | read-only | current | The Device-ID string as will be advertised in subsequent CDP messages. |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.4 | ColumnrlCdpTlvAddress1Type | read-only | current | The Inet address type of rlCdpTlvAddress1 |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.5 | ColumnrlCdpTlvAddress1 | read-only | current | The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.6 | ColumnrlCdpTlvAddress2Type | read-only | current | The Inet address type of rlCdpTlvAddress2 |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.7 | ColumnrlCdpTlvAddress2 | read-only | current | The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.8 | ColumnrlCdpTlvAddress3Type | read-only | current | The Inet address type of rlCdpTlvAddress3 |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.9 | ColumnrlCdpTlvAddress3 | read-only | current | The (first) network-layer address of the device as will be advertised in the Address TLV of subsequent CDP messages. For example, if the corresponding instance… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.10 | ColumnrlCdpTlvPortId | read-only | current | The Port-ID string as will be advertised in subsequent CDP messages from this interface. This will typically be the value of the ifName object (e.g., 'Ethernet… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.11 | ColumnrlCdpTlvCapabilities | read-only | current | The Device's Functional Capabilities as will be advertised in subsequent CDP messages. For latest set of specific values, see the latest version of the CDP spe… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.12 | ColumnrlCdpTlvVersion | read-only | current | The Version string as will be advertised in subsequent CDP messages. |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.13 | ColumnrlCdpTlvPlatform | read-only | current | The Device's Hardware Platform as will be advertised in subsequent CDP messages. |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.14 | ColumnrlCdpTlvNativeVLAN | read-only | current | The local device's interface's native VLAN, as will be advertised in subsequent CDP messages. |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.15 | ColumnrlCdpTlvDuplex | read-only | current | The local device's interface's duplex mode, as will be advertised in subsequent CDP messages. |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.16 | ColumnrlCdpTlvApplianceID | read-only | current | The local device's Appliance ID, as will be advertised in subsequent CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be advertised in subse… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.17 | ColumnrlCdpTlvApplianceVlanID | read-only | current | The local device's VoIP VLAN ID, as will be advertised in subsequent CDP messages. A value of zero denotes no Appliance VLAN-ID TLV will be advertised in subse… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.18 | ColumnrlCdpTlvExtendedTrust | read-only | current | The local device's interface's extended trust mode, as will be advertised in subsequent CDP messages. A value of zero indicates the absence of extended trust. |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.19 | ColumnrlCdpTlvCosForUntrustedPorts | read-only | current | The COS value with which all packets received on an untrusted port should be marked by a simple switching device which cannot itself classify individual packet… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.20 | ColumnrlCdpTlvPowerAvailableRequestId | read-only | current | The Power Available TLV Request-ID field echoes the Request-ID field last received in a Power Requested TLV. It is 0 if no Power Requested TLV has been receive… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.21 | ColumnrlCdpTlvPowerAvailablePowerManagementId | read-only | current | The Power Available TLV Power-Management-ID field. |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.22 | ColumnrlCdpTlvPowerAvailable | read-only | current | The Power Available TLV Available-Power field indicates the number of milliwatts of power available to powered devices at the time this object is instatiated. |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.23 | ColumnrlCdpTlvPowerAvailableManagementPowerLevel | read-only | current | The Power Available TLV Management-Power-Level field indicates the number of milliwatts representing the supplier's request to the powered device for its Power… |
| 1.3.6.1.4.1.9.6.1.101.137.16.1.24 | ColumnrlCdpTlvSysName | read-only | current | The sysName MIB as will be advertised in subsequent CDP messages. |
| 1.3.6.1.4.1.9.6.1.101.137.17 | ScalarrlCdpAdvertiseApplianceTlv | read-write | current | By setting the MIB to True Appliance VLAN-ID TLV may be advertised. A value of False will prevent this TLV from being advertised. |
| 1.3.6.1.4.1.9.6.1.101.137.18 | ScalarrlCdpValidateMandatoryTlvs | read-write | current | By setting the MIB to true all mandatory TLVs 0x0001-0x0006 will be validated. Incoming CDP frames without any of the TLVs will be dropped. A value of false in… |
| 1.3.6.1.4.1.9.6.1.101.137.19 | TablerlCdpInterfaceCountersTable | not-accessible | current | This table contains all CDP counters values, indexed by interface id. |
| 1.3.6.1.4.1.9.6.1.101.137.19.1 | RowrlCdpInterfaceCountersEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.9.6.1.101.137.19.1.1 | ColumnrlCdpInterfaceId | not-accessible | current | Interface id, used as index for interface counters table. |
| 1.3.6.1.4.1.9.6.1.101.137.19.1.2 | ColumnrlCdpInterfaceTotalInputPackets | read-only | current | Num of received packets on rlCdpInterfaceId |
| 1.3.6.1.4.1.9.6.1.101.137.19.1.3 | ColumnrlCdpInterfaceV1InputPackets | read-only | current | Num of v1 received packets on rlCdpInterfaceId |
| 1.3.6.1.4.1.9.6.1.101.137.19.1.4 | ColumnrlCdpInterfaceV2InputPackets | read-only | current | Num of v2 received packets on rlCdpInterfaceId |
| 1.3.6.1.4.1.9.6.1.101.137.19.1.5 | ColumnrlCdpInterfaceTotalOutputPackets | read-only | current | Num of sent packets from rlCdpInterfaceId |
| 1.3.6.1.4.1.9.6.1.101.137.19.1.6 | ColumnrlCdpInterfaceV1OutputPackets | read-only | current | Num of v1 sent packets from rlCdpInterfaceId |
| 1.3.6.1.4.1.9.6.1.101.137.19.1.7 | ColumnrlCdpInterfaceV2OutputPackets | read-only | current | Num of v2 sent packets from rlCdpInterfaceId |
| 1.3.6.1.4.1.9.6.1.101.137.19.1.8 | ColumnrlCdpInterfaceIllegalChksum | read-only | current | Num of received packets with illegal CDP checksum. |
| 1.3.6.1.4.1.9.6.1.101.137.19.1.9 | ColumnrlCdpInterfaceErrorPackets | read-only | current | specifies the number of received CDP packets with other error (duplicated TLVs, illegal TLVs, etc.) |
| 1.3.6.1.4.1.9.6.1.101.137.19.1.10 | ColumnrlCdpInterfaceMaxNeighborsExceededInMainCache | read-only | current | specifies the number of times a CDP neighbor could not be stored in the main cache. |
| 1.3.6.1.4.1.9.6.1.101.137.19.1.11 | ColumnrlCdpInterfaceMaxNeighborsExceededInSecondaryCache | read-only | current | specifies the number of times a CDP neighbor could not be stored in the secondary cache. |
| 1.3.6.1.4.1.9.6.1.101.137.20 | ScalarrlCdpInterfaceCountersClear | read-write | current | By setting the scalar to a interface id , all error and traffic counters of this interface are set to zero. To clear the counters for ALL interfaces set the sc… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RlCdpCounterTypes | INTEGER { totalInputPackets(1), v1InputPackets(2), v2InputPackets(3), totalOutputPackets(4), v1OutputPackets(5), v2OutputPackets(6), illegalChksum(7), errorPackets(8), maxNeighborsExceededInMainCache(9), maxNeighborsExceededInSecondaryCache(10) } | current | v1OutputPackets counter specifies the number of sent CDP packets with version 1 v2OutputPackets counter specifies the number of sent CDP packets with version 2 v1InputPackets counter specifies the number of received CDP… |
| RlCdpPduActionTypes | INTEGER { filtering(1), bridging(2), flooding(3) } | current | filtering - CDP packets would filtered (dropped). bridging - CDP packets bridged as regular data packets |
| RlCdpVersionTypes | INTEGER { version-v1(1), version-v2(2) } | current | version-v1 - cdp version 1 version-v2 - cdp version 2 |