CISCOSB-EVENTS-MIB
49 objects
MTS events MIB.
Imported Objects
| CISCOSB-MIB | switch001 |
| CISCOSB-SMARTPORTS-MIB | RlSmartPortsMacroNameOrZero |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| RFC1155-SMI | Counter |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.150 | IdentityrlEventsMib | MTS events MIB. | ||
| 1.3.6.1.4.1.9.6.1.101.150.1 | NoderlPortEvents | |||
| 1.3.6.1.4.1.9.6.1.101.150.1.1 | ScalarrlAutoSmartPortAdminStatus | read-write | current | disabled - Auto Smart port feature is administratively disabled. enabled - Auto Smart port feature is administratively enabled. controlled - Auto Smart port fe… |
| 1.3.6.1.4.1.9.6.1.101.150.1.2 | ScalarrlAutoSmartPortOperStatus | read-only | current | disabled - Auto Smart port feature is operationally disabled. enabled - Auto Smart port feature is operationally enabled. |
| 1.3.6.1.4.1.9.6.1.101.150.1.3 | ScalarrlAutoSmartPortLastVoiceVlanStatus | read-only | current | Indicated last status set by VOICE VLAN feature. If rlAutoSmartPortAdminStatus has 'controlled' value then the value of this object is the same as rlAutoSmartP… |
| 1.3.6.1.4.1.9.6.1.101.150.1.4 | ScalarrlAutoSmartPortLastVoiceVlanId | read-only | current | Indicated last VOICE VLAN ID set by VOICE VLAN feature. |
| 1.3.6.1.4.1.9.6.1.101.150.1.5 | ScalarrlAutoSmartPortLearningProtocols | read-write | current | cdp - Information about device type of neighboring devices(s) is learnt via CDP (Cisco Discovery Protocol) advertisements. lldp - Information about device type… |
| 1.3.6.1.4.1.9.6.1.101.150.1.6 | TablerlAutoSmartPortTypesTable | not-accessible | current | The table is used to keep all the information related to a specific port type. |
| 1.3.6.1.4.1.9.6.1.101.150.1.6.1 | RowrlAutoSmartPortTypesEntry | not-accessible | current | An entry (conceptual row) in the rlAutoSmartPortTypesTable. |
| 1.3.6.1.4.1.9.6.1.101.150.1.6.1.1 | ColumnrlAutoSmartPortTypesType | not-accessible | current | Smart port type. |
| 1.3.6.1.4.1.9.6.1.101.150.1.6.1.2 | ColumnrlAutoSmartPortTypeStatus | read-write | current | Smart port type global status. |
| 1.3.6.1.4.1.9.6.1.101.150.1.6.1.3 | ColumnrlAutoSmartPortMacro | read-write | current | Macro to be activated when a port is set to the smart port type indicated by rlAutoSmartPortTypesType. The macro whose name is 'no_'<rlAutoSmartPortMacro> is a… |
| 1.3.6.1.4.1.9.6.1.101.150.1.6.1.4 | ColumnrlAutoSmartPortTypesRevertToDefaultMacro | read-write | current | Setting this object will cause the smart port type macro associated with this smart port type to revert to the default macro. |
| 1.3.6.1.4.1.9.6.1.101.150.1.6.1.5 | ColumnrlAutoSmartPortTypesRevertToDefaultParams | read-write | current | Setting this object will cause the default smart port type parameter values associated with the built-in macro of this smart port type to revert to their defau… |
| 1.3.6.1.4.1.9.6.1.101.150.1.6.1.6 | ColumnrlAutoSmartPortTypesBuiltinMacro | read-only | current | Indicates whether the macro is built-in or user defined. |
| 1.3.6.1.4.1.9.6.1.101.150.1.7 | TablerlAutoSmartPortMacrosParamTable | not-accessible | current | The table is used to keep all the default parameter values related to a specific port type. |
| 1.3.6.1.4.1.9.6.1.101.150.1.7.1 | RowrlAutoSmartPortMacrosParamEntry | not-accessible | current | A parameter name & default value pair for a smart port type macro. |
| 1.3.6.1.4.1.9.6.1.101.150.1.7.1.1 | ColumnrlAutoSmartPortMacroType | not-accessible | current | Macro type - built-in or user defined. |
| 1.3.6.1.4.1.9.6.1.101.150.1.7.1.2 | ColumnrlAutoSmartPortMacrosParamName | not-accessible | current | Name of the parameter to be supplied at smart port macro activation. |
| 1.3.6.1.4.1.9.6.1.101.150.1.7.1.3 | ColumnrlAutoSmartPortMacrosParamOrder | read-write | current | Setting this object to 'first' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType… |
| 1.3.6.1.4.1.9.6.1.101.150.1.7.1.4 | ColumnrlAutoSmartPortMacrosParamValue | read-write | current | Default value of the parameter to be supplied at smart port macro activation. |
| 1.3.6.1.4.1.9.6.1.101.150.1.8 | TablerlAutoSmartPortPortsTable | not-accessible | current | The table is used to keep all the auto smart port information related to a specific port. |
| 1.3.6.1.4.1.9.6.1.101.150.1.8.1 | RowrlAutoSmartPortPortsEntry | not-accessible | current | An entry (conceptual row) in the rlAutoSmartPortPortsTable. |
| 1.3.6.1.4.1.9.6.1.101.150.1.8.1.1 | ColumnrlAutoSmartPortPort | not-accessible | current | The port to which the smartport information is associated. |
| 1.3.6.1.4.1.9.6.1.101.150.1.8.1.2 | ColumnrlAutoSmartPortPortStatus | read-write | current | Indicates whether auto smart port feature is enabled or not on this port. |
| 1.3.6.1.4.1.9.6.1.101.150.1.8.1.3 | ColumnrlAutoSmartPortPortType | read-write | current | Smart port type associated with this port. If set by user, the port will retain the smart port type at link down, link not present and reboot events. |
| 1.3.6.1.4.1.9.6.1.101.150.1.8.1.4 | ColumnrlAutoSmartPortPersistency | read-write | current | If set to persistent then, if the system concludes, according to the information learnt there is no relevant device connected to the port, the rlAutoSmartPortP… |
| 1.3.6.1.4.1.9.6.1.101.150.1.8.1.5 | ColumnrlAutoSmartPortLearntPortType | read-only | current | Smart port type learnt via the learning protocols. This value will be different from rlAutoSmartPortPortType only if rlAutoSmartPortPortType was manually confi… |
| 1.3.6.1.4.1.9.6.1.101.150.1.8.1.6 | ColumnrlAutoSmartPortPortAcquiringType | read-write | current | Indicates the way that the value of rlAutoSmartPortPortType was acquired. This object can be set only during configuration download. |
| 1.3.6.1.4.1.9.6.1.101.150.1.8.1.7 | ColumnrlAutoSmartPortLastActivatedMacro | read-only | current | Indicates macro name of last activated macro or 'no macro' if no macro was run. |
| 1.3.6.1.4.1.9.6.1.101.150.1.8.1.8 | ColumnrlAutoSmartPortFailedCommandNumber | read-only | current | Indicates number of command (starting with 1) that caused the macro failure or 0 if the macro succeeded or no macro was run. |
| 1.3.6.1.4.1.9.6.1.101.150.1.8.1.9 | ColumnrlAutoSmartPortSetLearntPortType | read-write | current | Instructs the system to set the port type to the learnt port type. |
| 1.3.6.1.4.1.9.6.1.101.150.1.9 | TablerlAutoSmartPortParamsTable | not-accessible | current | This table optionally determines the parameter values for the macro that is activated when the smartport type is manually changed for a specific port or trunk … |
| 1.3.6.1.4.1.9.6.1.101.150.1.9.1 | RowrlAutoSmartPortParamsEntry | not-accessible | current | A parameter name & immediate value. |
| 1.3.6.1.4.1.9.6.1.101.150.1.9.1.1 | ColumnrlAutoSmartPortIfIndex | not-accessible | current | The port or trunk that this entry is associated with. |
| 1.3.6.1.4.1.9.6.1.101.150.1.9.1.2 | ColumnrlAutoSmartPortParamName | not-accessible | current | Name of the parameter whose value must be supplied at a smart port macro activation. |
| 1.3.6.1.4.1.9.6.1.101.150.1.9.1.3 | ColumnrlAutoSmartPortParamOrder | read-write | current | Setting this object to 'first' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType… |
| 1.3.6.1.4.1.9.6.1.101.150.1.9.1.4 | ColumnrlAutoSmartPortParamValue | not-accessible | current | Value of the parameter whose value must be supplied at a smart port macro activation. |
| 1.3.6.1.4.1.9.6.1.101.150.1.10 | TablerlAutoSmartTrunkRefreshTable | not-accessible | current | Setting this object causes running the SmartPort macros of the following types: router, switch and ap. This operation is called the trunk refresh operation. |
| 1.3.6.1.4.1.9.6.1.101.150.1.10.1 | RowrlAutoSmartTrunkRefreshEntry | not-accessible | current | An entry (conceptual row) in the rlAutoSmartTrunkRefreshTable. |
| 1.3.6.1.4.1.9.6.1.101.150.1.10.1.1 | ColumnrlAutoSmartTrunkRefreshSmartPortType | not-accessible | current | If not default the trunk refresh operation will be carried out on all ports of this smart port type if rlAutoSmartTrunkRefreshIfIndex is nonzero, or on the por… |
| 1.3.6.1.4.1.9.6.1.101.150.1.10.1.2 | ColumnrlAutoSmartTrunkRefreshIfIndex | not-accessible | current | If 0 the trunk refresh operation will be carried out on all ports of the smart port type as specified in the rlAutoSmartTrunkRefreshSmartPortType. If nonzero t… |
| 1.3.6.1.4.1.9.6.1.101.150.1.10.1.3 | ColumnrlAutoSmartTrunkRefreshRowStatus | read-create | current | Since this an action table only createAndGo will be accepted and the conceptual row will vanish immediately after the action execution. |
| 1.3.6.1.4.1.9.6.1.101.150.1.11 | ScalarrlAutoSmartBusy | read-only | current | If true indicates that the autosmartports system is temporarily busy performing a multiport operation and therefore can not service management requests for the… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SmartPortMacroParameterName | DisplayString(SIZE(1..32)) | current | Smart macro parameter name. |
| SmartPortMacroParameterOrder | INTEGER {single(1), first(2), middle(3), last(4)} | current | Smart macro parameter order. |
| SmartPortMacroParameterValue | DisplayString(SIZE(1..80)) | current | Smart macro parameter value. |
| SmartPortMacroType | INTEGER {built-in(1), user-defined(2)} | current | Smart macro type - built-in or user-defined. |
| SmartPortType | INTEGER { unknown(1), default(2), printer(3), desktop(4), guest(5), server(6), host(7), ip-camera(8), ip-phone(9), ip-phone-desktop(10), switch(11), router(12), ap(13) } | current | Supported smart port types. |