MIB Viewer

CM-COMMON-MIB

70 objects
This module defines the Common MIB definitions used by the FSP150CM and FSP150CC product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
ADVA-MIBfsp150cm
SNMPv2-SMICounter32 Counter64 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCTEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.2544.1.12.1IdentitycmCommonMIBThis module defines the Common MIB definitions used by the FSP150CM and FSP150CC product lines. Copyright (C) ADVA Optical Networking.
1.3.6.1.4.1.2544.1.12.1.1Nodesubproducts
1.3.6.1.4.1.2544.1.12.1.1.1Nodenemihubshelf
1.3.6.1.4.1.2544.1.12.1.1.2Nodege101
1.3.6.1.4.1.2544.1.12.1.1.3Nodege206
1.3.6.1.4.1.2544.1.12.1.1.4Nodege201
1.3.6.1.4.1.2544.1.12.1.1.5Nodege201se
1.3.6.1.4.1.2544.1.12.1.1.6Nodege206f
1.3.6.1.4.1.2544.1.12.1.1.7Nodecmagg
1.3.6.1.4.1.2544.1.12.1.1.8Nodege112
1.3.6.1.4.1.2544.1.12.1.1.9Nodege114
1.3.6.1.4.1.2544.1.12.1.1.10Nodege206v
1.3.6.1.4.1.2544.1.12.1.1.11Nodexg210
1.3.6.1.4.1.2544.1.12.1.1.12Nodet1804
1.3.6.1.4.1.2544.1.12.1.1.13Nodet3204
1.3.6.1.4.1.2544.1.12.1.1.14Nodegesyncprobe
1.3.6.1.4.1.2544.1.12.1.1.15Nodege114H
1.3.6.1.4.1.2544.1.12.1.1.16Nodege114PH
1.3.6.1.4.1.2544.1.12.1.1.17Nodege114S
1.3.6.1.4.1.2544.1.12.1.1.18Nodege114SH
1.3.6.1.4.1.2544.1.12.1.1.19Nodesh1pcs
1.3.6.1.4.1.2544.1.12.1.1.20Nodege112Pro
1.3.6.1.4.1.2544.1.12.1.1.21Nodege112ProM
1.3.6.1.4.1.2544.1.12.1.1.22Nodege114Pro
1.3.6.1.4.1.2544.1.12.1.1.23Nodege114ProC
1.3.6.1.4.1.2544.1.12.1.1.24Nodege114ProSH
1.3.6.1.4.1.2544.1.12.1.1.25Nodege114ProCSH
1.3.6.1.4.1.2544.1.12.1.1.26Nodege114ProHE
1.3.6.1.4.1.2544.1.12.1.1.27Nodexg210c
1.3.6.1.4.1.2544.1.12.1.1.28Nodege112ProH
1.3.6.1.4.1.2544.1.12.1.1.29Nodege114G
1.3.6.1.4.1.2544.1.12.1.2Nodef3Capabilities
Type Definitions
NameSyntaxStatusDescription
AdminStateINTEGER { in-service (1), management (2), maintenance(3), disabled (4), unassigned (5), monitored (6) }currentAdministrative State used for FSP150CM entities. in-service - represents normal, in-service, traffic passing state of the Entity; management - represents the traffic passing state, however, alarms are not reported maint…
AfpTagControlINTEGER { ctag(1), stag(2), both(3) }currentDescribes the Afp Tag Control.
ClassOfServiceTypeINTEGER { cos-not-applicable(0), cos-zero(1), cos-one(2), cos-two(3), cos-three(4), cos-four(5), cos-five(6), cos-six(7), cos-seven(8) }currentClass of Service Types.
CmP2PFlowTypeINTEGER { eline (1) }currentDescribes the Agg Flow Type,incluing e-line.
CmPmBinActionINTEGER { not-applicable(0), clear (1) }currentProvides ability to clear the contents of PM bin.
CmPmIntervalTypeINTEGER { interval-15min (1), interval-1day (2), rollover (3), interval-5min (4) }currentDescribes the Performance Monitoring Interval Type.
CmTrafficAclFilterActionTypeINTEGER { permit (1), deny (2) }currentEnumerations for Access Control List permit - Permit access, deny - Deny access.
CmTrafficAclFilterTypeINTEGER { mac (1), ipv4 (2), ipv6 (3) }currentDescribes the Traffic acl filter type, including MAC IPV4 IPV6.
CmTrafficACLPriorityTypeINTEGER { notApplicable(0), acl-tos(1), acl-dscp(2) }currentDescribes the Traffic acl priority type, including tos, dscp and traffic class.
CmTrafficAclProtocolTypeINTEGER { notApplicable(0), tcp (1), udp (2) }currentDescribes the Traffic acl protocol type, including tcp udp.
Decimal32Unsigned32currentThe value is encoded in a Decimal32 interchange format. The decimal value should be calculated as follows: (−1)^sign x 10^(exponent−101) x mantissa The individual components of the equation are coded in two differen…
EthernetMediaTypeINTEGER { not-applicable(0), copper(1), fiber(2), coppersfp(3), auto(4), none(5) }currentDescribes the Ethernet Port Media Type.
EthernetPortSpeedINTEGER { speed-unknown (0), speed-10MB-full (1), speed-10MB-half (2), speed-100MB-full(3), speed-100MB-half(4), speed-1000MB-full(5), speed-1000MB-half(6), speed-auto (7), speed-auto-10MB-full(8), speed-auto-10MB-half(9), speed-auto-100MB-full(10), speed-auto-100MB-half(11), speed-auto-1000MB-full(12), speed-auto-1000MB-half(13), speed-negotiating(14), speed-auto-1000MB-full-master(15), speed-auto-1000MB-full-slave(16), speed-none(17), speed-auto-1000MB-full-master-preferred(18), speed-auto-1000MB-full-slave-preferred(19), speed-10G-full (20), speed-auto-detect (21) }currentDescribes the Ethernet Port Speed. speed-unknown : speed unknown speed-10MB-full : fixed speed 10MB full duplex speed-10MB-half : fixed speed 10MB half duplex speed-100MB-full : fixed speed 100MB full duplex speed-100MB…
F3DisplayStringOCTET STRING (SIZE (0..2047))currentThis object is similar with DisplayString, and the difference is its length is 2047. Any object defined using this syntax may not exceed 2047 characters in length.
FlowSecStateINTEGER { secureNormal (1), secureBlocked (2), unsecureNormal (3), unsecureBlocked (4) }currentFlow secure state.
IpPriorityMapModeINTEGER { not-applicable(0), none(1), priomap-tos(2), priomap-dscp(3) }currentThis type allows choice of IP Priority Mapping Mode.
IpVersionINTEGER { ipv4(1), ipv6(2) }currentThis type allows choice of IPv4 or IPv6 address specification.
MepDestinationTypeINTEGER { not-applicable(0), mepid(1), macaddress(2) }currentDestination MEP Types.
OperationalStateINTEGER { normal (1), outage (2) }currentOperational State used for FSP150CM entities. normal - represents operational state UP, outage - represents operational state DOWN.
PerfCounter32Counter32currentThis type represents a non-negative 32-bit integer. The initial value of this integer will be 0. It will increment with time, however, the value will revert back to 0 when the time period for history interval elapses. T…
PerfCounter64Counter64currentThis type represents a non-negative 64-bit integer. The initial value of this integer will be 0. It will increment with time, however, the value will revert back to 0 when the time period for history interval elapses. T…
PortTypeINTEGER { eth-access (1), eth-network (2) }currentEnumerations for types of ports. eth-access - Ethernet Access Port, eth-network - Ethernet Network Port.
PriorityMapModeINTEGER { priomap-none(1), priomap-tos(2), priomap-dscp(3), priomap-8021p(4), priomap-8021p-inner(5) }currentThis type allows choice of Priority Mapping Mode.
RestartTypeINTEGER { not-applicable(0), warm-start (1), cold-start (2) }currentRestart Type used across all card types.
SchedActivityActionINTEGER { not-applicable(0), suspend(1), resume(2) }currentScheduled Activity Action.
SchedActivityStatusINTEGER { initial(1), active(2), suspended(3), completed(4) }currentScheduled Group Activity Status.
ScheduleTypeINTEGER { periodic(1), one-shot(2) }currentDescribes the Schedule Type of a scheduled operation.
SecondaryStateBITS { not-applicable (0), active (1), automaticinservice (2), facilityfailure (3), fault (4), loopback (5), maintenance (6), mismatchedeqpt (7), standbyhot (8), supportingentityoutage (9), unassigned (10), unequipped (11), disabled (12), forcedoffline (13), initializing(14), prtcl(15), blckd(16), mon-tx(17), mir-rx(18), cema(19), lkdo(20) }currentSecondary state used for FSP150CM entities. active - Active, automaticinservice - Automatic In Service, facilityfailure - Facility Failure, fault - Fault, loopback - Loopback, maintenance - Maintenance, mismatchedeqpt -…
SfpConnectorValueINTEGER { not-applicable (0), unknown (1), sc (2), fcs1cu (3), fcs2cu (4), bnc-tnc (5), fccoaxhdr (6), fjack (7), lc (8), mt-rj (9), mu (10), sg (11), optpigtail (12), hssdc (13), cupigtail (14), vendorspecific (15), rj45(16) }currentThis lists the SFP connector values.
SfpMediaTypeINTEGER { not-applicable(0), singlemode(1), multimode(2), multimode62-5(3), copper(4) }currentDescribes the SFP Media Type.
SignalDirectionTypeINTEGER { input(1), output(2) }currentSignal Direction Type.
TDMFrequencySourceTypeINTEGER { notApplicable(0), loopTiming(1), systemTiming(2), lineTiming(3) }currentEnumerations for TDM Frequency Source loopTiming, systemTiming, lineTiming
TrafficDirectionINTEGER { a2n (1), n2a (2), ingress (3), egress (4), n2n (5) }currentEnumerations for direction of traffic. a2n - Access to Network direction, n2a - Network to Access direction, ingress - Entering system direction, egress - Away from system direction, n2n - Network to Network direction.
UserInterfaceTypeINTEGER { cli (1), gui (2), netconf (3), snmp (4) }currentDenotes used user interface type.
VlanEthertypeINTEGER { cvlan (1), svlan (2) }currentDescribes the Vlan Ether Type, cvlan, svlan.
VlanIdINTEGER (0..4095)currentTextual Convention for the Vlan Id.
VlanPriorityINTEGER (0..7)currentTextual Convention for the Vlan Priority.
VlanTagTypeINTEGER { inner-vlantag (1), outer-vlantag (2), n2a-priorityMapping(3), mplsLabel(4), vcLabel(5), encapOuterVlanTag(6) }currentTextual Convention for the Type of VLAN Tag.
MIB Viewer