CMM3-MIB
201 objects
This module contains CMM3 MIB definitions.
Imported Objects
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| WHISP-GLOBAL-REG-MIB | whispBox whispCMM whispModules |
| WHISP-TCV2-MIB | EventString WhispLUID WhispMACAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.161.19.1.1.15 | IdentitycmmIIIMibModule | This module contains CMM3 MIB definitions. | ||
| 1.3.6.1.4.1.161.19.3.4.1 | NodecmmGroups | |||
| 1.3.6.1.4.1.161.19.3.4.1.1 | GroupcmmSwitchGroup | current | CMMIII switch group. | |
| 1.3.6.1.4.1.161.19.3.4.1.2 | GroupcmmConfigGroup | current | CMMIII configuration group. | |
| 1.3.6.1.4.1.161.19.3.4.1.3 | GroupcmmStatusGroup | current | CMMIII configuration group. | |
| 1.3.6.1.4.1.161.19.3.4.1.4 | GroupcmmGPSGroup | current | CMMIII GPS status group. | |
| 1.3.6.1.4.1.161.19.3.4.1.5 | GroupcmmUserTableGroup | current | CMMIII User Information Table group. | |
| 1.3.6.1.4.1.161.19.3.4.2 | NodecmmSwitch | |||
| 1.3.6.1.4.1.161.19.3.4.2.1 | TablecmmSwitchTable | not-accessible | current | Table of CMM MIB counters. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1 | RowcmmSwitchEntry | not-accessible | current | CMM MIB counters |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.1 | ColumnportNumber | read-only | current | A unique value for each CMM port. Its value starts from 1 |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.2 | ColumnrxDropPkts | read-only | current | The number of good packets received by a port that were dropped due to lack of resources(e.g., lack of input buffers)or were dropped due to lack of resources b… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.3 | ColumnrxOctets | read-only | current | The number of bytes of data received by a port (excluding preamble but including FCS), including bad packets. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.4 | ColumnrxBroadcastPkts | read-only | current | The number of good packets received by a port that are directed to the broadcast address. This counter does not include error broadcast packets or valid multic… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.5 | ColumnrxMulticastPkts | read-only | current | The number of good packets received by a port that are directed to the multicast address. This counter does not include error multicast packets or valid broadc… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.6 | ColumnrxSAChanges | read-only | current | The number of times the SA of good receive packets has changed from the previous value. A count greater than 1 generally indicates the port if connected to a r… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.7 | ColumnrxUndersizePkts | read-only | current | The number of good packets received by a port that are less than 64 bytes long (excluding framing bits but including the FCS). |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.8 | ColumnrxOversizePkts | read-only | current | The number of good packets received by a port that are greater than 1522 bytes inclusive (excluding framing bits but including the FCS). Note that this counter… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.9 | ColumnrxFragments | read-only | current | The number of packets received by a port that are less than 64 bytes(excluding framing bits) and have either an FCS error or an alignment error |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.10 | ColumnrxJabbers | read-only | current | The number of packets received by a port that are longer than 1522 bytes and have either an FCS error or an alignment error. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.11 | ColumnrxUnicastPkts | read-only | current | The number of good packets received by a port that are addressed to a unicast address. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.12 | ColumnrxAlignmentErrors | read-only | current | The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes, inclusive, and have a bad FCS… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.13 | ColumnrxFCSErrors | read-only | current | The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 152 bytes, and have a bad FCS with an int… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.14 | ColumnrxGoodOctets | read-only | current | The total number of bytes in all good packets received by a port (excluding framing bits but including FCS). |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.15 | ColumnrxExcessSizeDisc | read-only | current | The number of good packets received by a port that are greater than 1536 bytes (excluding framing bits but including FCS) and were discarded due to excessive l… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.16 | ColumnrxPausePkts | read-only | current | The number of PAUSE frame received by a port. The PAUSE frame must have a valid MAC Control Frame EtherType field (88-08h), have a destination MAC address of e… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.17 | ColumnrxSymbolErrors | read-only | current | The total number of times a valid length packet was received at a port and at least one invalid data symbol was detected. Counter only increment once per carri… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.18 | ColumntxDropPkts | read-only | current | The total number of good bytes of data transmitted by a port (excluding preamble but including FCS). |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.19 | ColumntxOctets | read-only | current | The number of good packets received by a port that are directed to the multicast address. This counter does not include error multicast packets or valid broadc… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.20 | ColumntxBroadcastPkts | read-only | current | The number of good packets transmitted by a port that are directed to a broadcast address. This counter does not include errored broadcast packets or valid mul… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.21 | ColumntxMulticastPkts | read-only | current | The number of good packets transmitted by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid bro… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.22 | ColumntxCollisions | read-only | current | The number of collision experienced by a port during packet transmissions. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.23 | ColumntxUnicastPkts | read-only | current | The number of good packets transmitted by a port that are addressed to a unicast address. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.24 | ColumntxSingleCollision | read-only | current | The number packets successfully transmitted by a port that experienced exactly one collision. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.25 | ColumntxMultipleCollision | read-only | current | The number packets successfully transmitted by a port that experienced more than one collision |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.26 | ColumntxDeferredTransmit | read-only | current | The number packets successfully transmitted by a port for which the first transmission attempt is delayed because medium is busy. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.27 | ColumntxLateCollision | read-only | current | The number of times that a collision is detected later than 512 bit-times into the transmission of a packet. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.28 | ColumntxExcessiveCollision | read-only | current | The number of packets that are not transmitted from a port because the packet experienced 16 transmission attempts. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.29 | ColumntxPausePkts | read-only | current | The number of PAUSE frame transmitted by a port. The MAC resolve to full duplex mode, with 803.3x flow control PAUSE frame exchange enabled at the completion o… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.30 | ColumntxFrameInDisc | read-only | current | The number of valid packets received which are discarded by the forwarding process due to lack of space on an output queue. Note: not maintained or reported in… |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.31 | Columnpkts64Octets | read-only | current | The number of packets (including error packets) that are 64 bytes long. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.32 | Columnpkts65to127Octets | read-only | current | The number of packets (including error packets) that are between 65 and 127 bytes long. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.33 | Columnpkts128to255Octets | read-only | current | The number of packets (including error packets) that are between 128 and 255 bytes long. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.34 | Columnpkts256to511Octets | read-only | current | The number of packets (including error packets) that are between 256 and 511 bytes long. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.35 | Columnpkts512to1023Octets | read-only | current | The number of packets (including error packets) that are between 512 and 1023 bytes long. |
| 1.3.6.1.4.1.161.19.3.4.2.1.1.36 | Columnpkts1024to1522Octets | read-only | current | The number of packets (including error packets) that are between 1024 and 1522 bytes long. |
| 1.3.6.1.4.1.161.19.3.4.2.2 | ScalarportMirrorEnable | read-write | current | A unique value for each CMM port. Its value starts from 1 |
| 1.3.6.1.4.1.161.19.3.4.2.3 | ScalarmirrorCapturePort | read-write | current | A unique value for each CMM port. Its value starts from 1 |
| 1.3.6.1.4.1.161.19.3.4.2.4 | TablecmmSwitchMirrorSrcPortsTable | not-accessible | current | Table of CMM Switch Mirror Source Ports. |
| 1.3.6.1.4.1.161.19.3.4.2.4.1 | RowcmmSwitchMirrorSrcPortsEntry | not-accessible | current | CMM Switch Mirror Source Ports |
| 1.3.6.1.4.1.161.19.3.4.2.4.1.1 | ColumnmirSrcPortNumber | read-only | current | A unique value for each CMM port. Its value starts from 1 |
| 1.3.6.1.4.1.161.19.3.4.2.4.1.2 | ColumnmirSrcRxEnable | read-write | current | A unique value for each CMM port. Its value starts from 1 |
| 1.3.6.1.4.1.161.19.3.4.2.4.1.3 | ColumnmirSrcTxEnable | read-write | current | A unique value for each CMM port. Its value starts from 1 |
| 1.3.6.1.4.1.161.19.3.4.3 | NodecmmConfig | |||
| 1.3.6.1.4.1.161.19.3.4.3.1 | ScalargpsTimingPulse | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.2 | Scalarlan1Ip | read-write | current | LAN 1 IP. |
| 1.3.6.1.4.1.161.19.3.4.3.3 | Scalarlan1SubnetMask | read-write | current | LAN 1 subnet mask. |
| 1.3.6.1.4.1.161.19.3.4.3.4 | ScalardefaultGateway | read-write | current | Default gateway |
| 1.3.6.1.4.1.161.19.3.4.3.5 | Scalarport1PowerCtr | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.6 | Scalarport2PowerCtr | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.7 | Scalarport3PowerCtr | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.8 | Scalarport4PowerCtr | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.9 | Scalarport5PowerCtr | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.10 | Scalarport6PowerCtr | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.11 | Scalarport7PowerCtr | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.12 | Scalarport8PowerCtr | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.13 | ScalardisplayOnlyAccess | read-write | obsolete | Display only access to web interface and telnet. |
| 1.3.6.1.4.1.161.19.3.4.3.14 | ScalarfullAccess | read-write | obsolete | Full access password to web interface and telnet. |
| 1.3.6.1.4.1.161.19.3.4.3.15 | ScalardisplayOnlyStatus | read-only | obsolete | Display only password status. |
| 1.3.6.1.4.1.161.19.3.4.3.16 | ScalarfullAccessStatus | read-only | obsolete | Full access password status. |
| 1.3.6.1.4.1.161.19.3.4.3.17 | ScalarwebAutoUpdate | read-write | current | Web page auto update in seconds. 0 means disabled. |
| 1.3.6.1.4.1.161.19.3.4.3.18 | Scalarport1Config | read-write | current | Link speed configuration on port 1. |
| 1.3.6.1.4.1.161.19.3.4.3.19 | Scalarport2Config | read-write | current | Link speed configuration on port 2. |
| 1.3.6.1.4.1.161.19.3.4.3.20 | Scalarport3Config | read-write | current | Link speed configuration on port 3. |
| 1.3.6.1.4.1.161.19.3.4.3.21 | Scalarport4Config | read-write | current | Link speed configuration on port 4. |
| 1.3.6.1.4.1.161.19.3.4.3.22 | Scalarport5Config | read-write | current | Link speed configuration on port 5. |
| 1.3.6.1.4.1.161.19.3.4.3.23 | Scalarport6Config | read-write | current | Link speed configuration on port 6. |
| 1.3.6.1.4.1.161.19.3.4.3.24 | Scalarport7Config | read-write | current | Link speed configuration on port 7. |
| 1.3.6.1.4.1.161.19.3.4.3.25 | Scalarport8Config | read-write | current | Link speed configuration on port 8. |
| 1.3.6.1.4.1.161.19.3.4.3.26 | Scalarport1Description | read-write | current | Port 1 text description. |
| 1.3.6.1.4.1.161.19.3.4.3.27 | Scalarport2Description | read-write | current | Port 2 text description. |
| 1.3.6.1.4.1.161.19.3.4.3.28 | Scalarport3Description | read-write | current | Port 3 text description. |
| 1.3.6.1.4.1.161.19.3.4.3.29 | Scalarport4Description | read-write | current | Port 4 text description. |
| 1.3.6.1.4.1.161.19.3.4.3.30 | Scalarport5Description | read-write | current | Port 5 text description. |
| 1.3.6.1.4.1.161.19.3.4.3.31 | Scalarport6Description | read-write | current | Port 6 text description. |
| 1.3.6.1.4.1.161.19.3.4.3.32 | Scalarport7Description | read-write | current | Port 7 text description. |
| 1.3.6.1.4.1.161.19.3.4.3.33 | Scalarport8Description | read-write | current | Port 8 text description. |
| 1.3.6.1.4.1.161.19.3.4.3.34 | ScalarsnmpTrap1 | read-write | current | SNMP Trap Address 1. |
| 1.3.6.1.4.1.161.19.3.4.3.35 | ScalarsnmpTrap2 | read-write | current | SNMP Trap Address 2. |
| 1.3.6.1.4.1.161.19.3.4.3.36 | ScalarsnmpTrap3 | read-write | current | SNMP Trap Address 3. |
| 1.3.6.1.4.1.161.19.3.4.3.37 | ScalarsnmpTrap4 | read-write | current | SNMP Trap Address 4. |
| 1.3.6.1.4.1.161.19.3.4.3.38 | ScalarsnmpTrap5 | read-write | current | SNMP Trap Address 5. |
| 1.3.6.1.4.1.161.19.3.4.3.39 | ScalarsnmpTrap6 | read-write | current | SNMP Trap Address 6. |
| 1.3.6.1.4.1.161.19.3.4.3.40 | ScalarsnmpTrap7 | read-write | current | SNMP Trap Address 7. |
| 1.3.6.1.4.1.161.19.3.4.3.41 | ScalarsnmpTrap8 | read-write | current | SNMP Trap Address 8. |
| 1.3.6.1.4.1.161.19.3.4.3.42 | ScalarsnmpTrap9 | read-write | current | SNMP Trap Address 9. |
| 1.3.6.1.4.1.161.19.3.4.3.43 | ScalarsnmpTrap10 | read-write | current | SNMP Trap Address 10. |
| 1.3.6.1.4.1.161.19.3.4.3.44 | ScalarvlanTagEnable | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.45 | ScalarvlanTagId | read-write | current | 802.1q VLAN Tag ID, 1-4094. |
| 1.3.6.1.4.1.161.19.3.4.3.46 | Scalarport1Uplink | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.47 | Scalarport2Uplink | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.48 | Scalarport3Uplink | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.49 | Scalarport4Uplink | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.50 | Scalarport5Uplink | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.51 | Scalarport6Uplink | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.52 | Scalarport7Uplink | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.53 | Scalarport8Uplink | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.54 | ScalarrebootIfRequired | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.55 | Scalarport1VlanConf | read-write | current | Port 1 VLAN Port Configuration. Bitmap determines which Port(s) Port 1 will egress data. 0 means no ports, 2 means port 2, 6 means ports 2 and 3, etc. |
| 1.3.6.1.4.1.161.19.3.4.3.56 | Scalarport2VlanConf | read-write | current | Port 2 VLAN Port Configuration. Bitmap determines which Port(s) Port 2 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
| 1.3.6.1.4.1.161.19.3.4.3.57 | Scalarport3VlanConf | read-write | current | Port 3 VLAN Port Configuration. Bitmap determines which Port(s) Port 3 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
| 1.3.6.1.4.1.161.19.3.4.3.58 | Scalarport4VlanConf | read-write | current | Port 4 VLAN Port Configuration. Bitmap determines which Port(s) Port 4 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
| 1.3.6.1.4.1.161.19.3.4.3.59 | Scalarport5VlanConf | read-write | current | Port 5 VLAN Port Configuration. Bitmap determines which Port(s) Port 5 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
| 1.3.6.1.4.1.161.19.3.4.3.60 | Scalarport6VlanConf | read-write | current | Port 6 VLAN Port Configuration. Bitmap determines which Port(s) Port 6 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
| 1.3.6.1.4.1.161.19.3.4.3.61 | Scalarport7VlanConf | read-write | current | Port 7 VLAN Port Configuration. Bitmap determines which Port(s) Port 7 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
| 1.3.6.1.4.1.161.19.3.4.3.62 | Scalarport8VlanConf | read-write | current | Port 8 VLAN Port Configuration. Bitmap determines which Port(s) Port 8 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc. |
| 1.3.6.1.4.1.161.19.3.4.3.63 | Scalarport1PwrReset | read-write | current | If Port 1 is Powered, attched device will be reset when set to 1. If Port 1 is Not Powered, nothing will happen. |
| 1.3.6.1.4.1.161.19.3.4.3.64 | Scalarport2PwrReset | read-write | current | If Port 2 is Powered, attched device will be reset when set to 1. If Port 2 is Not Powered, nothing will happen. |
| 1.3.6.1.4.1.161.19.3.4.3.65 | Scalarport3PwrReset | read-write | current | If Port 3 is Powered, attched device will be reset when set to 1. If Port 3 is Not Powered, nothing will happen. |
| 1.3.6.1.4.1.161.19.3.4.3.66 | Scalarport4PwrReset | read-write | current | If Port 4 is Powered, attched device will be reset when set to 1. If Port 4 is Not Powered, nothing will happen. |
| 1.3.6.1.4.1.161.19.3.4.3.67 | Scalarport5PwrReset | read-write | current | If Port 5 is Powered, attched device will be reset when set to 1. If Port 5 is Not Powered, nothing will happen. |
| 1.3.6.1.4.1.161.19.3.4.3.68 | Scalarport6PwrReset | read-write | current | If Port 6 is Powered, attched device will be reset when set to 1. If Port 6 is Not Powered, nothing will happen. |
| 1.3.6.1.4.1.161.19.3.4.3.69 | Scalarport7PwrReset | read-write | current | If Port 7 is Powered, attched device will be reset when set to 1. If Port 7 is Not Powered, nothing will happen. |
| 1.3.6.1.4.1.161.19.3.4.3.70 | Scalarport8PwrReset | read-write | current | If Port 8 is Powered, attched device will be reset when set to 1. If Port 8 is Not Powered, nothing will happen. |
| 1.3.6.1.4.1.161.19.3.4.3.71 | ScalarsnmpReadOnly | read-write | current | SNMP Permissions 1 - Read Only 0 - Read/Write. |
| 1.3.6.1.4.1.161.19.3.4.3.72 | ScalarsnmpCommunityString | read-write | current | SNMP Community String |
| 1.3.6.1.4.1.161.19.3.4.3.73 | ScalarsnmpAccessSubnet | read-write | current | SNMP Accessing Subnet 1. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.4.3.74 | ScalarsnmpAccessSubnet2 | read-write | current | SNMP Accessing Subnet 2. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.4.3.75 | ScalarsnmpAccessSubnet3 | read-write | current | SNMP Accessing Subnet 3. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.4.3.76 | ScalarsnmpAccessSubnet4 | read-write | current | SNMP Accessing Subnet 4. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.4.3.77 | ScalarsnmpAccessSubnet5 | read-write | current | SNMP Accessing Subnet 5. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.4.3.78 | ScalarsnmpAccessSubnet6 | read-write | current | SNMP Accessing Subnet 6. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.4.3.79 | ScalarsnmpAccessSubnet7 | read-write | current | SNMP Accessing Subnet 7. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.4.3.80 | ScalarsnmpAccessSubnet8 | read-write | current | SNMP Accessing Subnet 8. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.4.3.81 | ScalarsnmpAccessSubnet9 | read-write | current | SNMP Accessing Subnet 9. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.4.3.82 | ScalarsnmpAccessSubnet10 | read-write | current | SNMP Accessing Subnet 10. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.4.3.83 | Scalarport1Management | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.84 | Scalarport2Management | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.85 | Scalarport3Management | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.86 | Scalarport4Management | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.87 | Scalarport5Management | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.88 | Scalarport6Management | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.89 | Scalarport7Management | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.90 | Scalarport8Management | read-write | current | |
| 1.3.6.1.4.1.161.19.3.4.3.91 | ScalarsessionTimeout | read-write | current | Timer for Telnet, Web and FTP sessions. |
| 1.3.6.1.4.1.161.19.3.4.3.92 | ScalarsiteInfoViewable | read-write | current | Enable non login users the ability to view Site Information |
| 1.3.6.1.4.1.161.19.3.4.3.93 | ScalaripAccessFilterEnable | read-write | current | To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using … |
| 1.3.6.1.4.1.161.19.3.4.3.94 | ScalarallowedIPAccess1 | read-write | current | Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs. |
| 1.3.6.1.4.1.161.19.3.4.3.95 | ScalarallowedIPAccess2 | read-write | current | Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs. |
| 1.3.6.1.4.1.161.19.3.4.3.96 | ScalarallowedIPAccess3 | read-write | current | Allow access to CMM Management from this IP. 0 is default setting to allow from all IPs. |
| 1.3.6.1.4.1.161.19.3.4.3.97 | ScalarverifyGPSChecksum | read-write | current | Enable/Disable verification of GPS message checksums. |
| 1.3.6.1.4.1.161.19.3.4.3.98 | Scalarcmm3SnmpGPSSyncTrapEnable | read-write | current | Variable to enable/disable GPS sync/out-sync traps. |
| 1.3.6.1.4.1.161.19.3.4.4 | NodecmmStatus | |||
| 1.3.6.1.4.1.161.19.3.4.4.1 | TablecmmPortTable | not-accessible | current | A list of CMM III port entries. |
| 1.3.6.1.4.1.161.19.3.4.4.1.1 | RowcmmPortEntry | not-accessible | current | A CMM port entry containing objects with port status. |
| 1.3.6.1.4.1.161.19.3.4.4.1.1.1 | ColumnportIndex | read-only | current | A unique value for each CMM port. |
| 1.3.6.1.4.1.161.19.3.4.4.1.1.2 | ColumnlinkStatus | read-only | current | The current operational state of the port. |
| 1.3.6.1.4.1.161.19.3.4.4.1.1.3 | ColumnlinkSpeed | read-only | current | Network connectivity, 100BaseT or 10BaseT. |
| 1.3.6.1.4.1.161.19.3.4.4.1.1.4 | ColumnduplexStatus | read-only | current | Half-duplex data transmission or Full-duplex data transmission. |
| 1.3.6.1.4.1.161.19.3.4.4.1.1.5 | ColumnpowerStatus | read-only | current | Port power status indicates power on or power off. |
| 1.3.6.1.4.1.161.19.3.4.4.1.1.6 | ColumnuplinkStatus | read-only | current | Port Uplink status indicates whether port is configred as an Uplink Port. |
| 1.3.6.1.4.1.161.19.3.4.4.1.1.7 | ColumnmanagementStatus | read-only | current | Management Port status indicates whether port is configred as a CMM3 Management Port. |
| 1.3.6.1.4.1.161.19.3.4.4.2 | ScalardeviceType | read-only | current | A textual string containing information about device type. |
| 1.3.6.1.4.1.161.19.3.4.4.3 | ScalarpldVersion | read-only | current | Version of PLD code. |
| 1.3.6.1.4.1.161.19.3.4.4.4 | ScalarsoftwareVersion | read-only | current | CMM-III software version. It includes the operation system and software build time. |
| 1.3.6.1.4.1.161.19.3.4.4.5 | ScalarsystemTime | read-only | current | The current time. |
| 1.3.6.1.4.1.161.19.3.4.4.6 | ScalarupTime | read-only | current | Time since last system reboot. |
| 1.3.6.1.4.1.161.19.3.4.4.7 | ScalarsatellitesVisible | read-only | current | Number of satellites the GPS should see. |
| 1.3.6.1.4.1.161.19.3.4.4.8 | ScalarsatellitesTracked | read-only | current | Current number of satellites that GPS actually tracks. |
| 1.3.6.1.4.1.161.19.3.4.4.9 | Scalarlatitude | read-only | current | CMM-III latitude. |
| 1.3.6.1.4.1.161.19.3.4.4.10 | Scalarlongitude | read-only | current | CMM-III longitude. |
| 1.3.6.1.4.1.161.19.3.4.4.11 | Scalarheight | read-only | current | The height of CMM-III unit. |
| 1.3.6.1.4.1.161.19.3.4.4.12 | ScalartrackingMode | read-only | current | CMM-III GPS tracking mode. |
| 1.3.6.1.4.1.161.19.3.4.4.13 | ScalarsyncStatus | read-only | current | CMM-III GPS sync pulse status. |
| 1.3.6.1.4.1.161.19.3.4.4.14 | ScalarmacAddress | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.161.19.3.4.5 | NodecmmGps | |||
| 1.3.6.1.4.1.161.19.3.4.5.1 | ScalargpsTrackingMode | read-only | current | CMM-III GPS tracking mode. |
| 1.3.6.1.4.1.161.19.3.4.5.2 | ScalargpsTime | read-only | current | CMM-III GPS time. |
| 1.3.6.1.4.1.161.19.3.4.5.3 | ScalargpsDate | read-only | current | CMM-III GPS date. |
| 1.3.6.1.4.1.161.19.3.4.5.4 | ScalargpsSatellitesVisible | read-only | current | Number of satellites the GPS is supposed to see. |
| 1.3.6.1.4.1.161.19.3.4.5.5 | ScalargpsSatellitesTracked | read-only | current | Current number of satellites GPS tracked. |
| 1.3.6.1.4.1.161.19.3.4.5.6 | ScalargpsHeight | read-only | current | CMM height. |
| 1.3.6.1.4.1.161.19.3.4.5.7 | ScalargpsAntennaConnection | read-only | current | Antenna Connection status. |
| 1.3.6.1.4.1.161.19.3.4.5.8 | ScalargpsLatitude | read-only | current | CMM Latitude. |
| 1.3.6.1.4.1.161.19.3.4.5.9 | ScalargpsLongitude | read-only | current | CMM longitude. |
| 1.3.6.1.4.1.161.19.3.4.5.10 | ScalargpsInvalidMsg | read-only | current | Number of invalid messages. |
| 1.3.6.1.4.1.161.19.3.4.5.11 | ScalargpsRestartCount | read-only | current | Number of unit restart. |
| 1.3.6.1.4.1.161.19.3.4.5.12 | ScalargpsReceiverInfo | read-only | current | A textual string contains information on GPS receiver. |
| 1.3.6.1.4.1.161.19.3.4.5.13 | ScalargpsReInitCount | read-only | current | Number of times the GPS device has been completely re-initialized. |
| 1.3.6.1.4.1.161.19.3.4.6 | NodecmmEventLog | |||
| 1.3.6.1.4.1.161.19.3.4.6.1 | ScalareventLog | read-only | current | CMM Event log. |
| 1.3.6.1.4.1.161.19.3.4.6.2 | ScalarntpLog | read-only | current | CMM3 NTP Log |
| 1.3.6.1.4.1.161.19.3.4.7 | NodecmmControls | |||
| 1.3.6.1.4.1.161.19.3.4.7.1 | Scalarreboot | read-write | current | Setting the variable to 1 will reboot the unit. When the unit finishs rebooting, it will be in finishedReboot state. |
| 1.3.6.1.4.1.161.19.3.4.7.2 | ScalarclearEventLog | read-write | current | Setting the variable to 1 will clear the event log. |
| 1.3.6.1.4.1.161.19.3.4.8 | TablecmmUserTable | not-accessible | current | User information table. |
| 1.3.6.1.4.1.161.19.3.4.8.1 | RowcmmUserEntry | not-accessible | current | User entry. |
| 1.3.6.1.4.1.161.19.3.4.8.1.1 | ColumnentryIndex | read-only | current | User information table index. |
| 1.3.6.1.4.1.161.19.3.4.8.1.2 | ColumnuserLoginName | read-only | current | User name. |
| 1.3.6.1.4.1.161.19.3.4.8.1.3 | ColumnuserPswd | read-only | current | User password. |
| 1.3.6.1.4.1.161.19.3.4.8.1.4 | ColumnaccessLevel | read-only | current | User access level. |