CMM4-MIB
114 objects
This module contains CMM4 MIB definitions.
Imported Objects
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| WHISP-GLOBAL-REG-MIB | whispBox whispCMM4 whispModules |
| WHISP-TCV2-MIB | EventString WhispLUID WhispMACAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.161.19.1.1.15 | Identitycmm4MibModule | This module contains CMM4 MIB definitions. | ||
| 1.3.6.1.4.1.161.19.3.6.1 | Nodecmm4Groups | |||
| 1.3.6.1.4.1.161.19.3.6.1.1 | Groupcmm4PortCfgGroup | current | CMM4 Port Configuration Table. | |
| 1.3.6.1.4.1.161.19.3.6.1.2 | Groupcmm4ConfigGroup | current | CMM4 configuration group. | |
| 1.3.6.1.4.1.161.19.3.6.1.3 | Groupcmm4PortStatusGroup | current | CMM4 Port Configuration Status Table. | |
| 1.3.6.1.4.1.161.19.3.6.1.4 | Groupcmm4StatusGroup | current | CMM4 Status group. | |
| 1.3.6.1.4.1.161.19.3.6.1.5 | Groupcmm4GPSGroup | current | CMM4 GPS status group. | |
| 1.3.6.1.4.1.161.19.3.6.1.6 | Groupcmm4ControlsGroup | current | CMM4 Controls group. | |
| 1.3.6.1.4.1.161.19.3.6.1.7 | Groupcmm4SNMPGroup | current | CMM4 SNMP group. | |
| 1.3.6.1.4.1.161.19.3.6.1.8 | Groupcmm4UserTableGroup | current | CMM4 User Information Table group. | |
| 1.3.6.1.4.1.161.19.3.6.2 | Nodecmm4Config | |||
| 1.3.6.1.4.1.161.19.3.6.2.1 | ScalargpsTimingPulse | read-write | current | |
| 1.3.6.1.4.1.161.19.3.6.2.2 | Scalarlan1Ip | read-write | current | LAN 1 IP address |
| 1.3.6.1.4.1.161.19.3.6.2.3 | Scalarlan1SubnetMask | read-write | current | LAN 1 subnet mask. |
| 1.3.6.1.4.1.161.19.3.6.2.4 | ScalardefaultGateway | read-write | current | Default gateway |
| 1.3.6.1.4.1.161.19.3.6.2.5 | Scalarcmm4WebAutoUpdate | read-write | current | Web page auto update in seconds. 0 means disabled. |
| 1.3.6.1.4.1.161.19.3.6.2.6 | Scalarcmm4ExtEthPowerReset | read-write | current | Resets power to external ethernet switch. (0) Reset Complete. (1) Reset Switch. |
| 1.3.6.1.4.1.161.19.3.6.2.7 | Tablecmm4PortCfgTable | not-accessible | current | A list of CMM 4 port configuration entries. |
| 1.3.6.1.4.1.161.19.3.6.2.7.1 | Rowcmm4PortCfgEntry | not-accessible | current | A CMM4 port entry containing objects with port status. |
| 1.3.6.1.4.1.161.19.3.6.2.7.1.1 | ColumnportCfgIndex | read-only | current | A unique value for each CMM port. |
| 1.3.6.1.4.1.161.19.3.6.2.7.1.2 | Columncmm4PortText | read-write | current | Port Description. |
| 1.3.6.1.4.1.161.19.3.6.2.7.1.3 | Columncmm4PortDevType | read-write | current | Type of Device configured for each port. |
| 1.3.6.1.4.1.161.19.3.6.2.7.1.4 | Columncmm4PortPowerCfg | read-write | current | Port power status indicates power on or power off. |
| 1.3.6.1.4.1.161.19.3.6.2.7.1.5 | Columncmm4PortResetCfg | read-write | current | Reset power to port if and only if port is currently powered. |
| 1.3.6.1.4.1.161.19.3.6.2.8 | Scalarcmm4IpAccessFilter | read-write | current | IP Access filtering. (0) Filtering Disabled - All IPs will be allowed access. (1) Filtering Enabled - Only allow IPs in the allowed access list. |
| 1.3.6.1.4.1.161.19.3.6.2.9 | Scalarcmm4IpAccess1 | read-write | current | IP Access list entry 1. |
| 1.3.6.1.4.1.161.19.3.6.2.10 | Scalarcmm4IpAccess2 | read-write | current | IP Access list entry 2. |
| 1.3.6.1.4.1.161.19.3.6.2.11 | Scalarcmm4IpAccess3 | read-write | current | IP Access list entry 3. |
| 1.3.6.1.4.1.161.19.3.6.2.12 | Scalarcmm4MgmtPortSpeed | read-write | current | Management Port Speed Configuration. (1) autoNegotiate - Auto negotiate to best speed and duplex setting. (2) force10Half - Set port to 10 Mbit/s half-duplex. … |
| 1.3.6.1.4.1.161.19.3.6.2.13 | Scalarcmm4NTPServerIp | read-write | current | IP address for NTP server for CMM4 GPS Slave. |
| 1.3.6.1.4.1.161.19.3.6.2.14 | ScalarsessionTimeout | read-write | current | Timer for Telnet, Web and FTP sessions. |
| 1.3.6.1.4.1.161.19.3.6.2.15 | ScalarvlanEnable | read-write | current | To enable or disable VLAN tagging |
| 1.3.6.1.4.1.161.19.3.6.2.16 | ScalarmanagementVID | read-write | current | Management VLAN VID |
| 1.3.6.1.4.1.161.19.3.6.2.17 | ScalarsiteInfoViewable | read-write | current | Enable non login users the ability to view Site Information |
| 1.3.6.1.4.1.161.19.3.6.3 | Nodecmm4Status | |||
| 1.3.6.1.4.1.161.19.3.6.3.1 | Tablecmm4PortStatusTable | not-accessible | current | A list of Live CMM 4 port status entries. |
| 1.3.6.1.4.1.161.19.3.6.3.1.1 | Rowcmm4PortStatusEntry | not-accessible | current | A CMM4 port entry containing port status. |
| 1.3.6.1.4.1.161.19.3.6.3.1.1.1 | ColumnportStatusIndex | read-only | current | A unique value for each CMM port. |
| 1.3.6.1.4.1.161.19.3.6.3.1.1.4 | Columncmm4PortPowerStatus | read-only | current | Port power status indicates power on, off or Power over Ethernet fault. |
| 1.3.6.1.4.1.161.19.3.6.3.2 | ScalardeviceType | read-only | current | A textual string containing information about device type. |
| 1.3.6.1.4.1.161.19.3.6.3.3 | Scalarcmm4pldVersion | read-only | current | Version of CMM4 PLD code. |
| 1.3.6.1.4.1.161.19.3.6.3.4 | Scalarcmm4SoftwareVersion | read-only | current | CMM4 software version. It includes the operating system and software build time. |
| 1.3.6.1.4.1.161.19.3.6.3.5 | Scalarcmm4SystemTime | read-only | current | The current time. |
| 1.3.6.1.4.1.161.19.3.6.3.6 | Scalarcmm4UpTime | read-only | current | Time since last system reboot. |
| 1.3.6.1.4.1.161.19.3.6.3.7 | ScalarsatellitesVisible | read-only | current | Number of satellites the GPS sees. |
| 1.3.6.1.4.1.161.19.3.6.3.8 | ScalarsatellitesTracked | read-only | current | Current number of satellites that GPS actually tracks. |
| 1.3.6.1.4.1.161.19.3.6.3.9 | Scalarlatitude | read-only | current | CMM4 latitude. |
| 1.3.6.1.4.1.161.19.3.6.3.10 | Scalarlongitude | read-only | current | CMM4 longitude. |
| 1.3.6.1.4.1.161.19.3.6.3.11 | Scalarheight | read-only | current | The height of CMM4 unit. |
| 1.3.6.1.4.1.161.19.3.6.3.12 | ScalartrackingMode | read-only | current | CMM4 GPS tracking mode. |
| 1.3.6.1.4.1.161.19.3.6.3.13 | ScalarsyncStatus | read-only | current | CMM4 GPS sync pulse status. |
| 1.3.6.1.4.1.161.19.3.6.3.14 | Scalarcmm4MacAddress | read-only | current | MAC address of the unit. |
| 1.3.6.1.4.1.161.19.3.6.3.15 | Scalarcmm4ExtEthPwrStat | read-only | current | Current Live value of external Ethernet switch power. |
| 1.3.6.1.4.1.161.19.3.6.3.16 | Scalarcmm4FPGAVersion | read-only | current | CMM4 FPGA Version. |
| 1.3.6.1.4.1.161.19.3.6.3.17 | Scalarcmm4FPGAPlatform | read-only | current | CMM4 FPGA Revision. |
| 1.3.6.1.4.1.161.19.3.6.3.18 | ScalardefaultStatus | read-only | current | Current Status of the Default Plug and switch. If either is active the next boot will be a default boot. 0: None, Default Plug not inserted, Default Switch not… |
| 1.3.6.1.4.1.161.19.3.6.4 | Nodecmm4Gps | |||
| 1.3.6.1.4.1.161.19.3.6.4.1 | ScalargpsTrackingMode | read-only | current | CMM4 GPS tracking mode. |
| 1.3.6.1.4.1.161.19.3.6.4.2 | ScalargpsTime | read-only | current | CMM4 GPS time. |
| 1.3.6.1.4.1.161.19.3.6.4.3 | ScalargpsDate | read-only | current | CMM4 GPS date. |
| 1.3.6.1.4.1.161.19.3.6.4.4 | ScalargpsSatellitesVisible | read-only | current | Number of satellites the GPS sees |
| 1.3.6.1.4.1.161.19.3.6.4.5 | ScalargpsSatellitesTracked | read-only | current | Current number of satellites GPS is tracking. |
| 1.3.6.1.4.1.161.19.3.6.4.6 | ScalargpsHeight | read-only | current | CMM4 height. |
| 1.3.6.1.4.1.161.19.3.6.4.7 | ScalargpsAntennaConnection | read-only | current | Antenna Connection status. |
| 1.3.6.1.4.1.161.19.3.6.4.8 | ScalargpsLatitude | read-only | current | CMM4 Latitude. |
| 1.3.6.1.4.1.161.19.3.6.4.9 | ScalargpsLongitude | read-only | current | CMM4 longitude. |
| 1.3.6.1.4.1.161.19.3.6.4.10 | ScalargpsInvalidMsg | read-only | current | Number of invalid messages. |
| 1.3.6.1.4.1.161.19.3.6.4.11 | ScalargpsRestartCount | read-only | current | Number of unit restarts. |
| 1.3.6.1.4.1.161.19.3.6.4.12 | ScalargpsReceiverInfo | read-only | current | A textual string contains information on GPS receiver. |
| 1.3.6.1.4.1.161.19.3.6.4.13 | ScalargpsSyncStatus | read-only | current | Current Live value of GPS Sync Status. |
| 1.3.6.1.4.1.161.19.3.6.4.14 | ScalargpsSyncMasterSlave | read-only | current | Current Live value of GPS Sync Master/Slave Setting. |
| 1.3.6.1.4.1.161.19.3.6.4.15 | ScalargpsLog | read-only | current | GPS log. Includes times of sync detected and sync lost. |
| 1.3.6.1.4.1.161.19.3.6.4.16 | ScalargpsReInitCount | read-only | current | GPS ReInit counts. The number of times we have done a complete re-initialization of the GPS device. |
| 1.3.6.1.4.1.161.19.3.6.5 | Nodecmm4EventLog | |||
| 1.3.6.1.4.1.161.19.3.6.5.1 | ScalareventLog | read-only | current | CMM4 Event log. |
| 1.3.6.1.4.1.161.19.3.6.5.2 | ScalarntpLog | read-only | current | CMM4 NTP Log |
| 1.3.6.1.4.1.161.19.3.6.6 | Nodecmm4Controls | |||
| 1.3.6.1.4.1.161.19.3.6.6.1 | Scalarcmm4Reboot | read-write | current | Setting the variable to 1 will reboot the unit. When the unit finishes rebooting, it will be in finishedReboot state. |
| 1.3.6.1.4.1.161.19.3.6.6.2 | Scalarcmm4ClearEventLog | read-write | current | Setting the variable to 1 will clear the event log. |
| 1.3.6.1.4.1.161.19.3.6.6.3 | Scalarcmm4RebootIfRequired | read-write | current | Setting this to 1 will reboot the CMM4 IF and ONLY IF it is required due to configuration updates. If a reboot is NOT required, setting this value to 1 will ha… |
| 1.3.6.1.4.1.161.19.3.6.7 | Nodecmm4Snmp | |||
| 1.3.6.1.4.1.161.19.3.6.7.1 | Scalarcmm4SnmpComString | read-write | current | SNMP Community String |
| 1.3.6.1.4.1.161.19.3.6.7.2 | Scalarcmm4SnmpAccessSubnet | read-write | current | SNMP Accessing Subnet. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.6.7.3 | Scalarcmm4SnmpTrapIp1 | read-write | current | SNMP Trap IP 1. |
| 1.3.6.1.4.1.161.19.3.6.7.4 | Scalarcmm4SnmpTrapIp2 | read-write | current | SNMP Trap IP 2. |
| 1.3.6.1.4.1.161.19.3.6.7.5 | Scalarcmm4SnmpTrapIp3 | read-write | current | SNMP Trap IP 3. |
| 1.3.6.1.4.1.161.19.3.6.7.6 | Scalarcmm4SnmpTrapIp4 | read-write | current | SNMP Trap IP 4. |
| 1.3.6.1.4.1.161.19.3.6.7.7 | Scalarcmm4SnmpTrapIp5 | read-write | current | SNMP Trap IP 5. |
| 1.3.6.1.4.1.161.19.3.6.7.8 | Scalarcmm4SnmpTrapIp6 | read-write | current | SNMP Trap IP 6. |
| 1.3.6.1.4.1.161.19.3.6.7.9 | Scalarcmm4SnmpTrapIp7 | read-write | current | SNMP Trap IP 7. |
| 1.3.6.1.4.1.161.19.3.6.7.10 | Scalarcmm4SnmpTrapIp8 | read-write | current | SNMP Trap IP 8. |
| 1.3.6.1.4.1.161.19.3.6.7.11 | Scalarcmm4SnmpTrapIp9 | read-write | current | SNMP Trap IP 9. |
| 1.3.6.1.4.1.161.19.3.6.7.12 | Scalarcmm4SnmpTrapIp10 | read-write | current | SNMP Trap IP 10. |
| 1.3.6.1.4.1.161.19.3.6.7.13 | Scalarcmm4SnmpReadOnly | read-write | current | SNMP Permissions 1 - Read Only 0 - Read/Write. |
| 1.3.6.1.4.1.161.19.3.6.7.14 | Scalarcmm4SnmpGPSSyncTrapEnable | read-write | current | Variable to enable/disable GPS sync/out-sync traps. |
| 1.3.6.1.4.1.161.19.3.6.7.15 | Scalarcmm4SnmpAccessSubnet2 | read-write | current | SNMP Accessing Subnet 2. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.6.7.16 | Scalarcmm4SnmpAccessSubnet3 | read-write | current | SNMP Accessing Subnet 3. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.6.7.17 | Scalarcmm4SnmpAccessSubnet4 | read-write | current | SNMP Accessing Subnet 4. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.6.7.18 | Scalarcmm4SnmpAccessSubnet5 | read-write | current | SNMP Accessing Subnet 5. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.6.7.19 | Scalarcmm4SnmpAccessSubnet6 | read-write | current | SNMP Accessing Subnet 6. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.6.7.20 | Scalarcmm4SnmpAccessSubnet7 | read-write | current | SNMP Accessing Subnet 7. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.6.7.21 | Scalarcmm4SnmpAccessSubnet8 | read-write | current | SNMP Accessing Subnet 8. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.6.7.22 | Scalarcmm4SnmpAccessSubnet9 | read-write | current | SNMP Accessing Subnet 9. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.6.7.23 | Scalarcmm4SnmpAccessSubnet10 | read-write | current | SNMP Accessing Subnet 10. In x.x.x.x/y form where x.x.x.x is network and y is mask length. |
| 1.3.6.1.4.1.161.19.3.6.8 | Nodecmm4Event | |||
| 1.3.6.1.4.1.161.19.3.6.8.1 | Nodecmm4GPSEvent | |||
| 1.3.6.1.4.1.161.19.3.6.8.1.1 | Notificationcmm4GPSInSync | current | Signals a transition from No Sync to Sync OK. | |
| 1.3.6.1.4.1.161.19.3.6.8.1.2 | Notificationcmm4GPSNoSync | current | Signals a transition from Sync OK to No Sync. | |
| 1.3.6.1.4.1.161.19.3.6.9 | Tablecmm4UserTable | not-accessible | current | User information table. |
| 1.3.6.1.4.1.161.19.3.6.9.1 | Rowcmm4UserEntry | not-accessible | current | User entry. |
| 1.3.6.1.4.1.161.19.3.6.9.1.1 | ColumnentryIndex | read-only | current | User information table index. |
| 1.3.6.1.4.1.161.19.3.6.9.1.2 | ColumnuserLoginName | read-only | current | User name. |
| 1.3.6.1.4.1.161.19.3.6.9.1.3 | ColumnuserPswd | read-only | current | User password. |
| 1.3.6.1.4.1.161.19.3.6.9.1.4 | ColumnaccessLevel | read-only | current | User access level. |