COMPAQ-L2MGMT-MIB
47 objects
The Structure of Common Management Information for making a trunk and IGMP related function for Compaq devices.
Imported Objects
| COMPAQ-ID-REC-MIB | compaq-common-mgmt |
| RFC1155-SMI | IpAddress |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.161.3.2 | IdentityswCompaqL2Mgmt | The Structure of Common Management Information for making a trunk and IGMP related function for Compaq devices. | ||
| 1.3.6.1.4.1.232.161.3.2.1 | NodeswPortTrunkPackage | |||
| 1.3.6.1.4.1.232.161.3.2.1.1 | ScalarswPortTrunkMaxEntries | read-only | current | The max entries of swPortTrunkTable |
| 1.3.6.1.4.1.232.161.3.2.1.2 | ScalarswPortTrunkMaxPortMembers | read-only | current | The max number of ports allowed in a trunk. |
| 1.3.6.1.4.1.232.161.3.2.1.3 | TableswPortTrunkTable | not-accessible | current | This table specifies the port membership for each logical link. |
| 1.3.6.1.4.1.232.161.3.2.1.3.1 | RowswPortTrunkEntry | not-accessible | current | A list of information specifies which ports group form a single logical link. |
| 1.3.6.1.4.1.232.161.3.2.1.3.1.1 | ColumnswPortTrunkIndex | read-only | current | The index of logical port trunk. |
| 1.3.6.1.4.1.232.161.3.2.1.3.1.2 | ColumnswPortTrunkName | read-create | current | The name of logical port trunk. |
| 1.3.6.1.4.1.232.161.3.2.1.3.1.3 | ColumnswPortTrunkMasterPort | read-only | current | The object indicates the master port number of the port trunk entry.The first port of the trunk is implicitly configured to be the master logical port.When usi… |
| 1.3.6.1.4.1.232.161.3.2.1.3.1.4 | ColumnswPortTrunkPortList | read-create | current | Indicate member ports of a logical trunk. |
| 1.3.6.1.4.1.232.161.3.2.1.3.1.5 | ColumnswPortTrunkState | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.232.161.3.2.2 | NodeswPortMirrorPackage | |||
| 1.3.6.1.4.1.232.161.3.2.2.1 | ScalarswPortMirrorMaxEntries | read-only | current | The max entries of this swPortMirrorCtrlTable |
| 1.3.6.1.4.1.232.161.3.2.2.2 | TableswPortMirrorCtrlTable | not-accessible | current | A list of port snooping entries.Port mirroring function provides an easy way to monitor traffic on any port. In this way any good packets appears on the source… |
| 1.3.6.1.4.1.232.161.3.2.2.2.1 | RowswPortMirrorCtrlEntry | not-accessible | current | A list of information provide an easy way to monitor traffic on any port. The use can bring a fancy network monitor attaching to any target mirror port and set… |
| 1.3.6.1.4.1.232.161.3.2.2.2.1.1 | ColumnswPortMirrorIndex | read-only | current | This object indicates the port snooping entry number.There is just only one now. |
| 1.3.6.1.4.1.232.161.3.2.2.2.1.2 | ColumnswPortMirrorSourcePort | read-create | current | This object indicates the number of port to be sniffed. The port number is the sequential (logical) number which is also applied to bridge MIB, etc. |
| 1.3.6.1.4.1.232.161.3.2.2.2.1.3 | ColumnswPortMirrorTargetPort | read-create | current | This object indicates switch which port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the seq… |
| 1.3.6.1.4.1.232.161.3.2.2.2.1.4 | ColumnswPortMirrorDirection | read-create | current | This object uses to setup the what packets will be mirrored. |
| 1.3.6.1.4.1.232.161.3.2.2.2.1.5 | ColumnswPortMirrorState | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.232.161.3.2.3 | NodeswIGMPPackage | |||
| 1.3.6.1.4.1.232.161.3.2.3.1 | ScalarswIGMPCtrlStatus | read-write | current | Enable the IGMP Control |
| 1.3.6.1.4.1.232.161.3.2.3.2 | ScalarswIGMPCtrlMaxEntries | read-only | current | The max entries of this swIGMPCtrlTable |
| 1.3.6.1.4.1.232.161.3.2.3.3 | TableswIGMPCtrlTable | not-accessible | current | The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swVlanInfoStatus). If VLAN is disabled or in Mac-Base mode, there is only… |
| 1.3.6.1.4.1.232.161.3.2.3.3.1 | RowswIGMPCtrlEntry | not-accessible | current | The entry in IGMP control table (swIGMPCtrlTable). The entry is effective only when IGMP capture switch (swDevIGMPCaptureState) is enabled. |
| 1.3.6.1.4.1.232.161.3.2.3.3.1.1 | ColumnswIGMPCtrlVid | read-create | current | This object indicates the IGMP control entry's VLAN id. If VLAN is disabled or in Mac-Base mode, the Vid is always 0 and cannot be changed by management users.… |
| 1.3.6.1.4.1.232.161.3.2.3.3.1.2 | ColumnswIGMPQueryInterval | read-create | current | The frequency at which IGMP Host-Query packets are transmitted on this interface. |
| 1.3.6.1.4.1.232.161.3.2.3.3.1.3 | ColumnswIGMPQueryMaxResponseTime | read-create | current | The maximum query response time advertised in IGMPv2 queries on this interface. |
| 1.3.6.1.4.1.232.161.3.2.3.3.1.4 | ColumnswIGMPRobustness | read-create | current | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. … |
| 1.3.6.1.4.1.232.161.3.2.3.3.1.5 | ColumnswIGMPCtrlTimer | read-only | current | The timer value for sending IGMP query packet when none was sent by the multicast router in the LAN. The timer works in per-VLAN basis. Our device will be acti… |
| 1.3.6.1.4.1.232.161.3.2.3.3.1.6 | ColumnswIGMPQuerierVersion | read-create | current | Select the IGMP Querier Version |
| 1.3.6.1.4.1.232.161.3.2.3.3.1.7 | ColumnswIGMPCtrlState | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.232.161.3.2.3.4 | ScalarswIGMPIfnoMaxEntries | read-only | current | The max entries of this swIGMPInfoTable |
| 1.3.6.1.4.1.232.161.3.2.3.5 | TableswIGMPInfoTable | not-accessible | current | The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device. |
| 1.3.6.1.4.1.232.161.3.2.3.5.1 | RowswIGMPInfoEntry | not-accessible | current | Information about current IGMP query information, provided that swDevIGMPCaptureState and swIGMPCtrlState of associated VLAN entry are all enabled. |
| 1.3.6.1.4.1.232.161.3.2.3.5.1.1 | ColumnswIGMPInfoVid | read-only | current | This object indicates the Vid of associated IGMP info table entry. It follows swIGMPCtrlVid in the associated entry of IGMP control table (swIGMPCtrlTable). |
| 1.3.6.1.4.1.232.161.3.2.3.5.1.2 | ColumnswIGMPInfoQueryCount | read-only | current | This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis. |
| 1.3.6.1.4.1.232.161.3.2.3.5.1.3 | ColumnswIGMPInfoTxQueryCount | read-only | current | This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to relate… |
| 1.3.6.1.4.1.232.161.3.2.3.6 | ScalarswIGMPTableMaxEntries | read-only | current | The max entries of swIGMPTable |
| 1.3.6.1.4.1.232.161.3.2.3.7 | TableswIGMPTable | not-accessible | current | This table containing current IGMP information which is captured by this device, provided that swDevIGMPCaptureState and swIGMPCtrlState of associated VLAN ent… |
| 1.3.6.1.4.1.232.161.3.2.3.7.1 | RowswIGMPEntry | not-accessible | current | Information about IGMP information which is captured by this device, provided that swDevIGMPCaptureState and swIGMPCtrlState of associated VLAN entry are all e… |
| 1.3.6.1.4.1.232.161.3.2.3.7.1.1 | ColumnswIGMPVid | read-only | current | This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network. |
| 1.3.6.1.4.1.232.161.3.2.3.7.1.2 | ColumnswIGMPGroupIpAddr | read-only | current | This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis. |
| 1.3.6.1.4.1.232.161.3.2.3.7.1.3 | ColumnswIGMPMacAddr | read-only | current | This object is to identify the mac address corresponding to swIGMPGroupIpAddr, in per-Vlan basis.. |
| 1.3.6.1.4.1.232.161.3.2.3.7.1.4 | ColumnswIGMPPortMap | read-only | current | This object indicates which ports are belonged to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port m… |
| 1.3.6.1.4.1.232.161.3.2.3.7.1.5 | ColumnswIGMPIpGroupReportCount | read-only | current | This object indicates how many report packets are received by our device corresponding to this entry since IGMP function is enabled, in per-Vlan basis. . |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |