CORIANT-GROOVE-MIB
1804 objects
SNMP MIB for Groove G30 release 2.1.0
Imported Objects
| SNMPv2-SMI | Counter64 enterprises MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowPointer RowStatus TruthValue txt TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.42229 | Nodecoriant | |||
| 1.3.6.1.4.1.42229.1 | Nodeproducts | |||
| 1.3.6.1.4.1.42229.1.2 | Identitygroove | SNMP MIB for Groove G30 release 2.1.0 | ||
| 1.3.6.1.4.1.42229.1.2.1 | Nodefault | |||
| 1.3.6.1.4.1.42229.1.2.1.1 | NodenotificationInfo | |||
| 1.3.6.1.4.1.42229.1.2.1.1.1 | NodenotificationObject | |||
| 1.3.6.1.4.1.42229.1.2.1.1.1.1 | ScalarnotificationFmEntity | read-only | current | The management object instance which the alarm or condition is reported against. |
| 1.3.6.1.4.1.42229.1.2.1.1.1.2 | ScalarnotificationConditionType | read-only | current | Identifies the current standing conditions which cause alarms and/or events. |
| 1.3.6.1.4.1.42229.1.2.1.1.1.3 | ScalarnotificationLocation | read-only | current | Indicates if the alarm or event location is near end or far end. |
| 1.3.6.1.4.1.42229.1.2.1.1.1.4 | ScalarnotificationDirection | read-only | current | Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA. |
| 1.3.6.1.4.1.42229.1.2.1.1.1.5 | ScalarnotificationTimePeriod | read-only | current | Indicates the time-period increments during which PM data is collected. |
| 1.3.6.1.4.1.42229.1.2.1.1.1.6 | ScalarnotificationServiceAffect | read-only | current | Indicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting. |
| 1.3.6.1.4.1.42229.1.2.1.1.1.7 | ScalarnotificationSeverityLevel | read-only | current | Indicates the notification code (severity level) associated with the alarm type of service affecting. |
| 1.3.6.1.4.1.42229.1.2.1.1.1.8 | ScalarnotificationOccurrenceDateTime | read-only | current | Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of … |
| 1.3.6.1.4.1.42229.1.2.1.1.1.9 | ScalarnotificationConditionDescription | read-only | current | Describes the condition that caused the alarm. |
| 1.3.6.1.4.1.42229.1.2.1.1.1.10 | ScalarnotificationAlarmConditionType | read-only | current | Alarm condition types, for example, standing or transient. |
| 1.3.6.1.4.1.42229.1.2.1.1.1.11 | ScalarnotificationLastSeverityLevel | read-only | current | Indicates the last severity level associated with the alarm type, which provides the info of alarm severity declared and cleared. |
| 1.3.6.1.4.1.42229.1.2.1.1.1.12 | ScalarnotificationExtensionDescription | read-only | current | The description in alarm notification to provide additional information. |
| 1.3.6.1.4.1.42229.1.2.1.1.1.13 | ScalarnotificationFmEntityType | read-only | current | Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exac… |
| 1.3.6.1.4.1.42229.1.2.1.2 | NodenotificationTrap | |||
| 1.3.6.1.4.1.42229.1.2.1.2.1 | NotificationalarmNotification | current | <description> | |
| 1.3.6.1.4.1.42229.1.2.1.2.2 | NotificationnotAlarmedEventNotification | current | <description> | |
| 1.3.6.1.4.1.42229.1.2.1.4 | NodealarmProfile | |||
| 1.3.6.1.4.1.42229.1.2.1.4.1 | TablealarmProfileTable | not-accessible | current | Alarm profile defines the severity profile of alarm and event. |
| 1.3.6.1.4.1.42229.1.2.1.4.1.1 | RowalarmProfileEntry | not-accessible | current | Entry of alarmProfileTable |
| 1.3.6.1.4.1.42229.1.2.1.4.1.1.1 | ColumnalarmProfileId | read-only | current | alarm profile identifier which uniquely specify alarm profile. alarm profile 1 is supported firstly and applicable to all entities implicitly. |
| 1.3.6.1.4.1.42229.1.2.1.5 | NodealarmProfileENTR | |||
| 1.3.6.1.4.1.42229.1.2.1.5.1 | TablealarmProfileENTRTable | not-accessible | current | The list includes alarm/event entries of an alarm-profile. |
| 1.3.6.1.4.1.42229.1.2.1.5.1.1 | RowalarmProfileENTREntry | not-accessible | current | Entry of alarmProfileENTRTable |
| 1.3.6.1.4.1.42229.1.2.1.5.1.1.1 | ColumnalarmProfileENTRConditionType | read-only | current | Identifies the current standing conditions which cause conditions and/or events. |
| 1.3.6.1.4.1.42229.1.2.1.5.1.1.2 | ColumnalarmProfileENTRFmEntityType | read-only | current | Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exac… |
| 1.3.6.1.4.1.42229.1.2.1.5.1.1.3 | ColumnalarmProfileENTRTimePeriod | read-only | current | Indicates the time-period increments during which PM data is collected. |
| 1.3.6.1.4.1.42229.1.2.1.5.1.1.4 | ColumnalarmProfileENTRSeverityLevelSa | read-only | current | Indicates the notification code (severity level) associated with the condition type of service affecting. |
| 1.3.6.1.4.1.42229.1.2.1.5.1.1.5 | ColumnalarmProfileENTRSeverityLevelNsa | read-only | current | Indicates the notification code (severity level) associated with the condition type of non-service affecting. |
| 1.3.6.1.4.1.42229.1.2.1.6 | NodestandingCondition | |||
| 1.3.6.1.4.1.42229.1.2.1.6.1 | TablestandingConditionTable | not-accessible | current | The list includes active standing alarms. |
| 1.3.6.1.4.1.42229.1.2.1.6.1.1 | RowstandingConditionEntry | not-accessible | current | Entry of standingConditionTable |
| 1.3.6.1.4.1.42229.1.2.1.6.1.1.1 | ColumnstandingConditionFmEntity | read-only | current | The management object instance which the alarm or condition is reported against. |
| 1.3.6.1.4.1.42229.1.2.1.6.1.1.2 | ColumnstandingConditionConditionType | read-only | current | Identifies the current standing conditions which cause alarms and/or events. |
| 1.3.6.1.4.1.42229.1.2.1.6.1.1.3 | ColumnstandingConditionLocation | read-only | current | Indicates if the alarm or event location is near end or far end. |
| 1.3.6.1.4.1.42229.1.2.1.6.1.1.4 | ColumnstandingConditionDirection | read-only | current | Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA. |
| 1.3.6.1.4.1.42229.1.2.1.6.1.1.5 | ColumnstandingConditionTimePeriod | read-only | current | Indicates the time-period increments during which PM data is collected. |
| 1.3.6.1.4.1.42229.1.2.1.6.1.1.6 | ColumnstandingConditionServiceAffect | read-only | current | Indicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting. |
| 1.3.6.1.4.1.42229.1.2.1.6.1.1.7 | ColumnstandingConditionSeverityLevel | read-only | current | Indicates the notification code (severity level) associated with the alarm type of service affecting. |
| 1.3.6.1.4.1.42229.1.2.1.6.1.1.8 | ColumnstandingConditionOccurrenceDateTime | read-only | current | Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of … |
| 1.3.6.1.4.1.42229.1.2.1.6.1.1.9 | ColumnstandingConditionConditionDescription | read-only | current | Describes the condition that caused the alarm. |
| 1.3.6.1.4.1.42229.1.2.1.6.1.1.10 | ColumnstandingConditionFmEntityType | read-only | current | Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exac… |
| 1.3.6.1.4.1.42229.1.2.2 | Nodene | |||
| 1.3.6.1.4.1.42229.1.2.2.1 | NodeneInfo | |||
| 1.3.6.1.4.1.42229.1.2.2.1.1 | ScalarneId | read-only | current | Network Element's system identification code. Note that this is unique identifier for each NE. default value : |
| 1.3.6.1.4.1.42229.1.2.2.1.2 | ScalarneName | read-only | current | Name assigned to this particular NE. A readable name for the NE. It can be used for NE. But not expected to be used by NM for unique NE identification The diff… |
| 1.3.6.1.4.1.42229.1.2.2.1.3 | ScalarneType | read-only | current | Type of the NE default value :GROOVE_G30 |
| 1.3.6.1.4.1.42229.1.2.2.1.4 | ScalarneLocation | read-only | current | Name of the location of this particular NE |
| 1.3.6.1.4.1.42229.1.2.2.1.5 | ScalarneSite | read-only | current | Name or CLLI of the site where this NE is located |
| 1.3.6.1.4.1.42229.1.2.2.1.6 | ScalarneAltitude | read-only | current | The altitude of the Network Element in meters UNITS:meters |
| 1.3.6.1.4.1.42229.1.2.2.1.7 | ScalarneVendor | read-only | current | Vendor name of this NE default value :Coriant |
| 1.3.6.1.4.1.42229.1.2.2.1.8 | ScalarneTemperature | read-only | current | Ambient temperature sensed by the primary shelf for NE level |
| 1.3.6.1.4.1.42229.1.2.2.2 | Nodesystem | |||
| 1.3.6.1.4.1.42229.1.2.2.2.1 | ScalarsystemUnknownPluggableReport | read-only | current | The attribute will enable/disable the alarm reporting for unknown pluggables present on the NE. default value :enabled |
| 1.3.6.1.4.1.42229.1.2.2.2.2 | ScalarsystemPowerConsumptionCurrent | read-only | current | Current power consumption of the system. |
| 1.3.6.1.4.1.42229.1.2.2.2.3 | ScalarsystemPowerConsumptionEstimatedMax | read-only | current | Derived maximal power consumption around room temperature. |
| 1.3.6.1.4.1.42229.1.2.2.2.4 | ScalarsystemFactoryResetButton | read-only | current | The attribute will enable/disable factory reset button function on the NE. default value :enabled |
| 1.3.6.1.4.1.42229.1.2.2.3 | Nodeconsole | |||
| 1.3.6.1.4.1.42229.1.2.2.3.1 | ScalarconsoleBaudRate | read-only | current | The baud rate of console port default value :9600 |
| 1.3.6.1.4.1.42229.1.2.3 | Nodeequipment | |||
| 1.3.6.1.4.1.42229.1.2.3.1 | Nodeshelf | |||
| 1.3.6.1.4.1.42229.1.2.3.1.1 | TableshelfTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.3.1.1.1 | RowshelfEntry | not-accessible | current | Entry of shelfTable |
| 1.3.6.1.4.1.42229.1.2.3.1.1.1.1 | ColumnshelfId | read-only | current | Identifier of the shelf. It shall be an integer number and assigned implicitly by the system or setting through coder on the shelf. |
| 1.3.6.1.4.1.42229.1.2.3.1.1.1.2 | ColumnshelfLocation | read-only | current | Name of the location of this particular shelf. |
| 1.3.6.1.4.1.42229.1.2.3.1.1.1.3 | ColumnshelfInletTemperature | read-only | current | shelf inlet temperature |
| 1.3.6.1.4.1.42229.1.2.3.1.1.1.4 | ColumnshelfOutletTemperature | read-only | current | shelf outlet temperature |
| 1.3.6.1.4.1.42229.1.2.3.1.1.1.5 | ColumnshelfAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.3.1.1.1.6 | ColumnshelfOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.3.1.1.1.7 | ColumnshelfAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.3.1.1.1.8 | ColumnshelfAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.3.2 | Nodeslot | |||
| 1.3.6.1.4.1.42229.1.2.3.2.1 | TableslotTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.3.2.1.1 | RowslotEntry | not-accessible | current | Entry of slotTable |
| 1.3.6.1.4.1.42229.1.2.3.2.1.1.1 | ColumnslotId | read-only | current | Identifier of the slot. It shall be an integer number and assigned implicitly by the system. |
| 1.3.6.1.4.1.42229.1.2.3.2.1.1.2 | ColumnslotActualCardType | read-only | current | Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty |
| 1.3.6.1.4.1.42229.1.2.3.2.1.1.3 | ColumnslotPossibleCardTypes | read-only | current | Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs. |
| 1.3.6.1.4.1.42229.1.2.3.2.1.1.4 | ColumnslotAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.3.2.1.1.5 | ColumnslotOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.3.2.1.1.6 | ColumnslotAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.3.2.1.1.7 | ColumnslotAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.3.3 | Nodecard | |||
| 1.3.6.1.4.1.42229.1.2.3.3.1 | TablecardTable | not-accessible | current | Card is a container carried by a slot. |
| 1.3.6.1.4.1.42229.1.2.3.3.1.1 | RowcardEntry | not-accessible | current | Entry of cardTable |
| 1.3.6.1.4.1.42229.1.2.3.3.1.1.1 | ColumncardRequiredType | read-only | current | The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model. |
| 1.3.6.1.4.1.42229.1.2.3.3.1.1.2 | ColumncardEquipmentName | read-only | current | The attribute indicates an additional field to identify the module. |
| 1.3.6.1.4.1.42229.1.2.3.3.1.1.3 | ColumncardAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.3.3.1.1.4 | ColumncardOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.3.3.1.1.5 | ColumncardAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.3.3.1.1.6 | ColumncardAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.3.3.1.1.7 | ColumncardFanSpeedRate | read-only | current | The fan speed of percentage. Conditions:../required-type = 'FAN' |
| 1.3.6.1.4.1.42229.1.2.3.3.1.1.8 | ColumncardSwitchingType | read-only | current | The traffic switching type of card. Conditions:(../required-type != 'FAN') and (../required-type != 'PSU') default value :otn |
| 1.3.6.1.4.1.42229.1.2.3.3.1.1.9 | ColumncardTemperature | read-only | current | Temperature at the monitoring point. |
| 1.3.6.1.4.1.42229.1.2.3.3.1.1.10 | ColumncardMode | read-only | current | Specify the card mode, e.g. normal or regen. default value :normal |
| 1.3.6.1.4.1.42229.1.2.3.4 | Nodesubslot | |||
| 1.3.6.1.4.1.42229.1.2.3.4.1 | TablesubslotTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.3.4.1.1 | RowsubslotEntry | not-accessible | current | Entry of subslotTable |
| 1.3.6.1.4.1.42229.1.2.3.4.1.1.1 | ColumnsubslotId | read-only | current | Identifier of the subslot. |
| 1.3.6.1.4.1.42229.1.2.3.4.1.1.2 | ColumnsubslotActualCardType | read-only | current | Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty |
| 1.3.6.1.4.1.42229.1.2.3.4.1.1.3 | ColumnsubslotPossibleCardTypes | read-only | current | Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs. |
| 1.3.6.1.4.1.42229.1.2.3.4.1.1.4 | ColumnsubslotAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.3.4.1.1.5 | ColumnsubslotOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.3.4.1.1.6 | ColumnsubslotAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.3.4.1.1.7 | ColumnsubslotAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.3.5 | Nodesubcard | |||
| 1.3.6.1.4.1.42229.1.2.3.5.1 | TablesubcardTable | not-accessible | current | Subcard is a container carried by a subslot. |
| 1.3.6.1.4.1.42229.1.2.3.5.1.1 | RowsubcardEntry | not-accessible | current | Entry of subcardTable |
| 1.3.6.1.4.1.42229.1.2.3.5.1.1.1 | ColumnsubcardRequiredType | read-only | current | The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model. |
| 1.3.6.1.4.1.42229.1.2.3.5.1.1.2 | ColumnsubcardEquipmentName | read-only | current | The attribute indicates an additional field to identify the module. |
| 1.3.6.1.4.1.42229.1.2.3.5.1.1.3 | ColumnsubcardAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.3.5.1.1.4 | ColumnsubcardOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.3.5.1.1.5 | ColumnsubcardAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.3.5.1.1.6 | ColumnsubcardAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.3.5.1.1.7 | ColumnsubcardTemperature | read-only | current | Temperature at the monitoring point. |
| 1.3.6.1.4.1.42229.1.2.3.6 | Nodeport | |||
| 1.3.6.1.4.1.42229.1.2.3.6.1 | TableportTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1 | RowportEntry | not-accessible | current | Entry of portTable |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.1 | ColumnportId | read-only | current | The identifier is defined to uniquely identify the port. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.2 | ColumnportPossiblePluggableTypes | read-only | current | Defined all the pluggable types which can be equipped on the port. Needs to be re-defined in the project specific model. This is a leaf list, encode by some le… |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.3 | ColumnportActualPluggableType | read-only | current | Pluggable type for each port according to the actually equipping. Needs to be re-defined in the project specific model. Conditions:../port-type != 'optical' de… |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.4 | ColumnportRxOpticalPower | read-only | current | Received optical power |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.5 | ColumnportTxOpticalPower | read-only | current | Transmitted optical power |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.6 | ColumnportRxOpticalPowerSelectedChannel | read-only | current | Optical power of the selected channel on coherent receiver, which will be different from the rx-optical-power when multiple channels input simultaneously. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.7 | ColumnportRxOpticalPowerLane1 | read-only | current | Received optical power of lane 1. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.8 | ColumnportRxOpticalPowerLane2 | read-only | current | Received optical power of lane 2. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.9 | ColumnportRxOpticalPowerLane3 | read-only | current | Received optical power of lane 3. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.10 | ColumnportRxOpticalPowerLane4 | read-only | current | Received optical power of lane 4. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.11 | ColumnportTxOpticalPowerLane1 | read-only | current | Transmitted optical power lane 1. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.12 | ColumnportTxOpticalPowerLane2 | read-only | current | Transmitted optical power lane 2. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.13 | ColumnportTxOpticalPowerLane3 | read-only | current | Transmitted optical power lane 3. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.14 | ColumnportTxOpticalPowerLane4 | read-only | current | Transmitted optical power lane 4. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.15 | ColumnportDirectionType | read-only | current | Supported direction of the optical port. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.16 | ColumnportName | read-only | current | The name of the port. default value :unspecified |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.17 | ColumnportType | read-only | current | The type of port. Needs to be provided upon Port creation |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.18 | ColumnportMode | read-only | current | The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. C… |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.19 | ColumnportAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.20 | ColumnportOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.21 | ColumnportAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.22 | ColumnportAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.23 | ColumnportServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.24 | ColumnportConnectedTo | read-only | current | Indicate neighbour port/facility entity to which the current port/facility is connected to. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.25 | ColumnportArcConfig | read-only | current | The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.26 | ColumnportArcState | read-only | current | The current mode of the Alarm Report Control (ARC). |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.27 | ColumnportArcSubState | read-only | current | Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.28 | ColumnportArcTimer | read-only | current | The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440 |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.29 | ColumnportArcRemainingTime | read-only | current | The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported. |
| 1.3.6.1.4.1.42229.1.2.3.6.1.1.30 | ColumnportExternalConnectivity | read-only | current | Indicates the port is connected externally or not. default value :no |
| 1.3.6.1.4.1.42229.1.2.3.7 | Nodesubport | |||
| 1.3.6.1.4.1.42229.1.2.3.7.1 | TablesubportTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1 | RowsubportEntry | not-accessible | current | Entry of subportTable |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.1 | ColumnsubportId | read-only | current | The identifier is defined to uniquely identify the subport. |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.2 | ColumnsubportPortName | read-only | current | The name of the port. default value :unspecified |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.3 | ColumnsubportPortType | read-only | current | The type of port. Needs to be provided upon Port creation |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.4 | ColumnsubportPortMode | read-only | current | The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. C… |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.5 | ColumnsubportAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.6 | ColumnsubportOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.7 | ColumnsubportAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.8 | ColumnsubportAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.9 | ColumnsubportServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.10 | ColumnsubportConnectedTo | read-only | current | Indicate neighbour port/facility entity to which the current port/facility is connected to. |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.11 | ColumnsubportArcConfig | read-only | current | The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.12 | ColumnsubportArcState | read-only | current | The current mode of the Alarm Report Control (ARC). |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.13 | ColumnsubportArcSubState | read-only | current | Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.14 | ColumnsubportArcTimer | read-only | current | The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440 |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.15 | ColumnsubportArcRemainingTime | read-only | current | The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported. |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.16 | ColumnsubportRxOpticalPower | read-only | current | Received optical power |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.17 | ColumnsubportTxOpticalPower | read-only | current | Transmitted optical power |
| 1.3.6.1.4.1.42229.1.2.3.7.1.1.18 | ColumnsubportExternalConnectivity | read-only | current | Indicates the port is connected externally or not. default value :no |
| 1.3.6.1.4.1.42229.1.2.3.8 | Nodepluggable | |||
| 1.3.6.1.4.1.42229.1.2.3.8.1 | TablepluggableTable | not-accessible | current | Represents the Pluggable object |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1 | RowpluggableEntry | not-accessible | current | Entry of pluggableTable |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.1 | ColumnpluggableRequiredType | read-only | current | The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model. |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.2 | ColumnpluggableFormFactor | read-only | current | Indicating the exact form factor of the pluggable. default value :Unrecognized |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.3 | ColumnpluggableInterfaceType | read-only | current | Indicating interface type of the pluggable. default value : |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.4 | ColumnpluggableLaserSource | read-only | current | The type of laser frequency. Only tx-lo-independent type support och-os rx-frequency working Conditions:../required-type = 'CFP2' default value :not-available |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.5 | ColumnpluggableHwVersion | read-only | current | The attribute Identifies the Hardware Version of the module that populates the slot. |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.6 | ColumnpluggableVendor | read-only | current | Vendor information. |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.7 | ColumnpluggableSerialNumber | read-only | current | This is the value of serial number stored in EEPROM of the equipment. |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.8 | ColumnpluggableFwVersion | read-only | current | Current Firmware (FW) version on the equipment. |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.9 | ColumnpluggablePartNumber | read-only | current | Identifies the Part Number of the equipment. |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.10 | ColumnpluggableClei | read-only | current | Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, fea… |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.11 | ColumnpluggableEquipmentName | read-only | current | The attribute indicates an additional field to identify the module. |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.12 | ColumnpluggableAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.13 | ColumnpluggableOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.14 | ColumnpluggableAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.15 | ColumnpluggableAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.3.8.1.1.16 | ColumnpluggableTemperature | read-only | current | Temperature at the monitoring point. |
| 1.3.6.1.4.1.42229.1.2.3.9 | Nodeamplifier | |||
| 1.3.6.1.4.1.42229.1.2.3.9.1 | TableamplifierTable | not-accessible | current | The list of optical amplifier on an equipment. |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1 | RowamplifierEntry | not-accessible | current | Entry of amplifierTable |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.1 | ColumnamplifierName | read-only | current | User-defined name assigned to identify a specific amplifier in the device |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.2 | ColumnamplifierSupportingInputPort | read-only | current | Identifier of the supporting input port. |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.3 | ColumnamplifierSupportingOutputPort | read-only | current | Identifier of the supporting output port. |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.4 | ColumnamplifierAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.5 | ColumnamplifierOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.6 | ColumnamplifierAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.7 | ColumnamplifierAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.8 | ColumnamplifierEnable | read-only | current | Configuration for enable or disable the amplifier. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.9 | ColumnamplifierInputLosShutdown | read-only | current | Enable or disable the function of automatic shutdown per input LOS. default value :enabled |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.10 | ColumnamplifierControlMode | read-only | current | Control mode of the amplifier. default value :auto |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.11 | ColumnamplifierMode | read-only | current | The operating mode of the amplifier default value :constant-gain |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.12 | ColumnamplifierType | read-only | current | Type of the amplifier. default value :variable-gain-EDFA |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.13 | ColumnamplifierTargetGain | read-only | current | Setting gain to the amplifier for constant-gain mode in manual control mode. |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.14 | ColumnamplifierOperatingGain | read-only | current | Operating gain of the amplifier, which is the actually configured gain on the amplifier. |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.15 | ColumnamplifierGainAdjustment | read-only | current | The value is used for adjustment of gain when the amplifier in automatic control mode, the automatically caculated gain will include offset of this attribute. … |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.16 | ColumnamplifierGainRangeMin | read-only | current | The minimum of settable gain. |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.17 | ColumnamplifierGainRangeMax | read-only | current | The maximum of settable gain. UNITS:dB |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.18 | ColumnamplifierOutputPowerMon | read-only | current | Monitored aggregation signal output power. UNITS:dBm |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.19 | ColumnamplifierOutputPowerMonWithAse | read-only | current | Monitored aggregation total output power including both signal and ASE. UNITS:dBm |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.20 | ColumnamplifierInputPowerMon | read-only | current | Monitored aggregation input power. UNITS:dBm |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.21 | ColumnamplifierOutputVoa | read-only | current | Configurable optical attenuation at output of the amplifier. default value :0.0 |
| 1.3.6.1.4.1.42229.1.2.3.9.1.1.22 | ColumnamplifierPowerBeforeOutputVoa | read-only | current | Monitored optical power after output VOA. UNITS:dBm |
| 1.3.6.1.4.1.42229.1.2.3.10 | Nodetdc | |||
| 1.3.6.1.4.1.42229.1.2.3.10.1 | TabletdcTable | not-accessible | current | The list of optical tdc on an equipment. |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1 | RowtdcEntry | not-accessible | current | Entry of tdcTable |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.1 | ColumntdcName | read-only | current | User-defined name assigned to identify a specific tdc in the device |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.2 | ColumntdcSupportingInputPort | read-only | current | Identifier of the supporting input port. |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.3 | ColumntdcSupportingOutputPort | read-only | current | Identifier of the supporting output port. |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.4 | ColumntdcAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.5 | ColumntdcOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.6 | ColumntdcAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.7 | ColumntdcAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.8 | ColumntdcMode | read-only | current | Control mode of the tunable dispersion compensation; Manual: CD value will be decided per configured CD value; Auto: system will automatically decide the CD va… |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.9 | ColumntdcReferenceFrequency | read-only | current | Indicating the reference wavelength of the TDC. UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.10 | ColumntdcActualReferenceFrequency | read-only | current | Indicating the actual reference wavelength of the TDC. UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.11 | ColumntdcFrequencyRangeMin | read-only | current | The minimum of supported wavelength. UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.12 | ColumntdcFrequencyRangeMax | read-only | current | The maximum of supported wavelength. UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.13 | ColumntdcChromaticDispersion | read-only | current | The setting value of Chromatic Dispersion. UNITS:ps/nm default value :0 |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.14 | ColumntdcChromaticDispersionAdjustment | read-only | current | The value will be used to adjust target chromatic dispersion by adding the value with auto decided dispersion in auto tdc mode. UNITS:ps/nm |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.15 | ColumntdcActualChromaticDispersion | read-only | current | The actual value of Chromatic Dispersion. UNITS:ps/nm |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.16 | ColumntdcCdRangeMin | read-only | current | The minimum of supported chromatic dispersion. UNITS:ps/nm |
| 1.3.6.1.4.1.42229.1.2.3.10.1.1.17 | ColumntdcCdRangeMax | read-only | current | The maximum of supported chromatic dispersion. UNITS:ps/nm |
| 1.3.6.1.4.1.42229.1.2.3.12 | Nodeinventory | |||
| 1.3.6.1.4.1.42229.1.2.3.12.1 | TableinventoryTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1 | RowinventoryEntry | not-accessible | current | Entry of inventoryTable |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.1 | ColumninventoryEquipmentType | read-only | current | The equipment type that the inventory data refers to |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.2 | ColumninventoryShelfId | read-only | current | Identifier of the shelf. |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.3 | ColumninventorySlotId | read-only | current | Identifier of the slot. |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.4 | ColumninventorySubslotId | read-only | current | Identifier of the subslot. |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.5 | ColumninventoryPortId | read-only | current | Identifier of the port. |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.6 | ColumninventoryEquipmentVersion | read-only | current | The attribute Identifies the Hardware Version of the module that populates the slot. |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.7 | ColumninventoryModuleType | read-only | current | This is the value of module type stored in EEPROM of the equipment. |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.8 | ColumninventoryVendor | read-only | current | Vendor information. |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.9 | ColumninventorySerialNumber | read-only | current | This is the value of serial number stored in EEPROM of the equipment. |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.10 | ColumninventoryFwVersion | read-only | current | Current Firmware (FW) version on the equipment. |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.11 | ColumninventoryPartNumber | read-only | current | Identifies the Part Number of the equipment. |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.12 | ColumninventoryClei | read-only | current | Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, fea… |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.13 | ColumninventoryInterfaceType | read-only | current | Indicating interface type of the pluggable. default value : |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.14 | ColumninventoryManufactureDate | read-only | current | The equipment manufacture date get from equipment. format is mm/dd/yyyy. When there is no date information show nothing Conditions:(../equipment-type = 'shelf'… |
| 1.3.6.1.4.1.42229.1.2.3.12.1.1.16 | ColumninventoryManufacturerNumber | read-only | current | This is the value of manufacturer number stored in EEPROM of the equipment. |
| 1.3.6.1.4.1.42229.1.2.3.14 | Nodeled | |||
| 1.3.6.1.4.1.42229.1.2.3.14.1 | TableledTable | not-accessible | current | Attributes related with LED Applicable to Shelf, FAN, PSU, CHM1, CHM2, CHM1G, OCC2 in DCI. |
| 1.3.6.1.4.1.42229.1.2.3.14.1.1 | RowledEntry | not-accessible | current | Entry of ledTable |
| 1.3.6.1.4.1.42229.1.2.3.14.1.1.1 | ColumnledEquipmentType | read-only | current | The attribute indicates the equipment type to identify the module. for example, if the card is CHM1, 'CHM1' shall be used. DCI supporting LEDs: CHM1, CHM2, SHE… |
| 1.3.6.1.4.1.42229.1.2.3.14.1.1.2 | ColumnledShelfId | read-only | current | Identifier of the shelf. |
| 1.3.6.1.4.1.42229.1.2.3.14.1.1.3 | ColumnledSlotId | read-only | current | Identifier of the slot. |
| 1.3.6.1.4.1.42229.1.2.3.14.1.1.4 | ColumnledName | read-only | current | The functional name of LED. DCI NE: location_led port(n)_led (CHM1: n = 1 to 6, CHM2 n = 1 to 12, e.g. Port12) active_led power_led fault_led status_led subslo… |
| 1.3.6.1.4.1.42229.1.2.3.14.1.1.5 | ColumnledStatus | read-only | current | Current LED status. DCI NE: For Location_LED: OFF, BLINK For others: red, red-blink,green,green-blink,amber,amber-blink,off,notAvailable |
| 1.3.6.1.4.1.42229.1.2.3.14.1.1.6 | ColumnledSubslotId | read-only | current | Identifier of the subslot. |
| 1.3.6.1.4.1.42229.1.2.3.15 | NodetemperatureDetails | |||
| 1.3.6.1.4.1.42229.1.2.3.15.1 | TabletemperatureDetailsTable | not-accessible | current | The detailed information of temperature in each monitoring-point of current module |
| 1.3.6.1.4.1.42229.1.2.3.15.1.1 | RowtemperatureDetailsEntry | not-accessible | current | Entry of temperatureDetailsTable |
| 1.3.6.1.4.1.42229.1.2.3.15.1.1.1 | ColumntemperatureDetailsMonitoringPoint | read-only | current | The point of temperature monitoring. It could be the sensor or chip internal. |
| 1.3.6.1.4.1.42229.1.2.3.15.1.1.2 | ColumntemperatureDetailsTemperature | read-only | current | Temperature at the monitoring point. |
| 1.3.6.1.4.1.42229.1.2.3.15.1.1.3 | ColumntemperatureDetailsTemperatureRangeLow | read-only | current | The lowest temperature threshold of this monitoring point in working mode. |
| 1.3.6.1.4.1.42229.1.2.3.15.1.1.4 | ColumntemperatureDetailsTemperatureRangeHigh | read-only | current | The highest temperature threshold of this monitoring point in working mode. |
| 1.3.6.1.4.1.42229.1.2.3.16 | Nodeotdr | |||
| 1.3.6.1.4.1.42229.1.2.3.16.1 | TableotdrTable | not-accessible | current | Container of OTDR. |
| 1.3.6.1.4.1.42229.1.2.3.16.1.1 | RowotdrEntry | not-accessible | current | Entry of otdrTable |
| 1.3.6.1.4.1.42229.1.2.3.16.1.1.1 | ColumnotdrState | read-only | current | Indicating the current status of the OTDR. default value :not-available |
| 1.3.6.1.4.1.42229.1.2.3.16.1.1.2 | ColumnotdrMeasurementTime | read-only | current | Indicating the time remaining in current measurement running. UNITS:second default value :0 |
| 1.3.6.1.4.1.42229.1.2.3.16.1.1.3 | ColumnotdrError | read-only | current | Error message produced when the measurement ends with error. |
| 1.3.6.1.4.1.42229.1.2.3.16.1.1.4 | ColumnotdrLaserStatus | read-only | current | Indicating the current status of the OTDR laser. default value :not-available |
| 1.3.6.1.4.1.42229.1.2.3.16.1.1.5 | ColumnotdrMeasurementPort | read-only | current | 0 indicates that the card is not measuring any port; non-zero indicates the OTDR port number where a measurement is currently taking place. default value :0 |
| 1.3.6.1.4.1.42229.1.2.3.18 | NodeotdrPort | |||
| 1.3.6.1.4.1.42229.1.2.3.18.1 | TableotdrPortTable | not-accessible | current | Containing attributes of OTDR port. |
| 1.3.6.1.4.1.42229.1.2.3.18.1.1 | RowotdrPortEntry | not-accessible | current | Entry of otdrPortTable |
| 1.3.6.1.4.1.42229.1.2.3.18.1.1.1 | ColumnotdrPortOtdrRange | read-only | current | OTDR measurement range. UNITS:km default value :auto |
| 1.3.6.1.4.1.42229.1.2.3.18.1.1.2 | ColumnotdrPortOtdrPulseWidth | read-only | current | Indicates pulse width to be used in otdr measurement. UNITS:nano-second default value :auto |
| 1.3.6.1.4.1.42229.1.2.3.18.1.1.3 | ColumnotdrPortOtdrMeasurementSpeed | read-only | current | Indicating OTDR measurement speed. default value :auto |
| 1.3.6.1.4.1.42229.1.2.3.18.1.1.4 | ColumnotdrPortOtdrIor | read-only | current | Specifies the group index of refraction (IOR) of the fiber to be measured. default value :auto |
| 1.3.6.1.4.1.42229.1.2.3.18.1.1.5 | ColumnotdrPortOtdrFiberType | read-only | current | Indicating fiber type to be measured. default value :auto |
| 1.3.6.1.4.1.42229.1.2.3.18.1.1.6 | ColumnotdrPortOtdrLastMeasurement | read-only | current | Indicates the last otdr measurement date and time on the port. default value :0000-00-00T00:00:00Z |
| 1.3.6.1.4.1.42229.1.2.3.18.1.1.7 | ColumnotdrPortOtdrResolution | read-only | current | Specifies the OTDR data sampling resolution. UNITS:meter default value :auto |
| 1.3.6.1.4.1.42229.1.2.3.20 | Nodeops | |||
| 1.3.6.1.4.1.42229.1.2.3.20.1 | TableopsTable | not-accessible | current | The list of optical protection switch (ops) on an equipment. |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1 | RowopsEntry | not-accessible | current | Entry of opsTable |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.1 | ColumnopsName | read-only | current | The name assigned to identify a specific ops in the device |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.2 | ColumnopsWorkingEntity | read-only | current | Identifier of the working port of the OPS. |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.3 | ColumnopsProtectionEntity | read-only | current | Identifier of the protection port of the OPS |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.4 | ColumnopsAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.5 | ColumnopsOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.6 | ColumnopsAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.7 | ColumnopsAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.8 | ColumnopsProtectionStatus | read-only | current | Indicates the status of the protection switch. |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.9 | ColumnopsActivePath | read-only | current | Indicating the active port of the protection switch. default value :unknown |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.10 | ColumnopsRevertive | read-only | current | Revertive behavior of the aps. If True, then automatically revert after protection switch once the fault is restored. default value :no |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.11 | ColumnopsWaitToRestore | read-only | current | Wait To Restore, valid values: 0-3600 seconds. A value of zero will switch back immediately, after expiration of the timer, the working is restored and a noreq… |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.12 | ColumnopsWorkingSwitchThreshold | read-only | current | The switching threshold of the working port which indicates the optical power threshold of signal degrade. default value :-18.0 |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.13 | ColumnopsProtectionSwitchThreshold | read-only | current | The switching threshold of the protection port which indicates the optical power threshold of signal degrade. default value :-18.0 |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.14 | ColumnopsWorkingLosThreshold | read-only | current | The switching threshold of the working port, power level below it will lead to loss of signal. default value :-23.0 |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.15 | ColumnopsProtectionLosThreshold | read-only | current | The switching threshold of the protection port, power level below it will lead to loss of signal. default value :-23.0 |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.16 | ColumnopsHoldoffTimer | read-only | current | The hold off time of the protection switch. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.3.20.1.1.17 | ColumnopsWavelengthBand | read-only | current | Specifies the band of the signal going through the optical protection switch unit. UNITS:nm default value :1550 |
| 1.3.6.1.4.1.42229.1.2.3.25 | NodesubportStatistics | |||
| 1.3.6.1.4.1.42229.1.2.3.25.1 | TablesubportStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.3.25.1.1 | RowsubportStatisticsEntry | not-accessible | current | Entry of subportStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.3.25.1.1.1 | ColumnsubportStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.3.26 | NodeportStatistics | |||
| 1.3.6.1.4.1.42229.1.2.3.26.1 | TableportStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.3.26.1.1 | RowportStatisticsEntry | not-accessible | current | Entry of portStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.3.26.1.1.1 | ColumnportStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.3.27 | NodesubcardStatistics | |||
| 1.3.6.1.4.1.42229.1.2.3.27.1 | TablesubcardStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.3.27.1.1 | RowsubcardStatisticsEntry | not-accessible | current | Entry of subcardStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.3.27.1.1.1 | ColumnsubcardStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.3.28 | NodecardStatistics | |||
| 1.3.6.1.4.1.42229.1.2.3.28.1 | TablecardStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.3.28.1.1 | RowcardStatisticsEntry | not-accessible | current | Entry of cardStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.3.28.1.1.1 | ColumncardStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.3.29 | NodeshelfStatistics | |||
| 1.3.6.1.4.1.42229.1.2.3.29.1 | TableshelfStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.3.29.1.1 | RowshelfStatisticsEntry | not-accessible | current | Entry of shelfStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.3.29.1.1.1 | ColumnshelfStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4 | Nodeservices | |||
| 1.3.6.1.4.1.42229.1.2.4.1 | Nodeotn | |||
| 1.3.6.1.4.1.42229.1.2.4.1.1 | Nodeeth10g | |||
| 1.3.6.1.4.1.42229.1.2.4.1.1.1 | Tableeth10gTable | not-accessible | current | Represents the 10GBE object. |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1 | Roweth10gEntry | not-accessible | current | Entry of eth10gTable |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.1 | Columneth10gEthFecType | read-only | current | The FEC working type of etyn port. default value :auto |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.2 | Columneth10gEthFecTypeState | read-only | current | The FEC working state of etyn port. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.3 | Columneth10gTransmitInterpacketgap | read-only | current | Specifies the minimum transmit IPG value. default value :8 |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.4 | Columneth10gGfpPayloadFcs | read-only | current | Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. def… |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.5 | Columneth10gMappingMode | read-only | current | The mapping mode of client port packets into ODUk. default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.6 | Columneth10gAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.7 | Columneth10gOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.8 | Columneth10gAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.9 | Columneth10gAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.10 | Columneth10gClientShutdown | read-only | current | The switching of client-shutdown. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.11 | Columneth10gClientShutdownHoldoffTimer | read-only | current | The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.12 | Columneth10gNearEndAls | read-only | current | The switching of near end ALS. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.13 | Columneth10gAlsDegradeMode | read-only | current | The switching of defect BERSD-ODU trig ALS default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.14 | Columneth10gLoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.15 | Columneth10gLoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.16 | Columneth10gTestSignalType | read-only | current | The type mode of test signal. default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.17 | Columneth10gTestSignalEnable | read-only | current | The enable switching of test signal function default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.18 | Columneth10gServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.19 | Columneth10gLldpStatusIf | read-only | current | Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent wi… |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.20 | Columneth10gUpiValue | read-only | current | The value of ODU2 upi in PREAMBLE mapping mode. default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.1.1.1.21 | Columneth10gHoldoffSignal | read-only | current | Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.2 | NodetestSignalFacilityStatus | |||
| 1.3.6.1.4.1.42229.1.2.4.1.2.1 | TabletestSignalFacilityStatusTable | not-accessible | current | Test signal status for current facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.2.1.1 | RowtestSignalFacilityStatusEntry | not-accessible | current | Entry of testSignalFacilityStatusTable |
| 1.3.6.1.4.1.42229.1.2.4.1.2.1.1.1 | ColumntestSignalFacilityStatusPrbsSync | read-only | current | The test result of PRBS Synchronization default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.2.1.1.2 | ColumntestSignalFacilityStatusTestTimeDuration | read-only | current | The time duration of signal test UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.2.1.1.3 | ColumntestSignalFacilityStatusPrbsBitErrorCount | read-only | current | The counting of bit error by PRBS Synchronization |
| 1.3.6.1.4.1.42229.1.2.4.1.3 | NodelldpRemoteSystem | |||
| 1.3.6.1.4.1.42229.1.2.4.1.3.1 | TablelldpRemoteSystemTable | not-accessible | current | List of LLDP neighbors. |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1 | RowlldpRemoteSystemEntry | not-accessible | current | Entry of lldpRemoteSystemTable |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.1 | ColumnlldpRemoteSystemLldpRemoteIndex | read-only | current | This attribute represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remot… |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.2 | ColumnlldpRemoteSystemRemoteChassisIdSubtype | read-only | current | This attribute describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhy… |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.3 | ColumnlldpRemoteSystemRemoteChassisId | read-only | current | This attribute describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which … |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.4 | ColumnlldpRemoteSystemRemotePortIdSubtype | read-only | current | This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identi… |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.5 | ColumnlldpRemoteSystemRemotePortId | read-only | current | This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identi… |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.6 | ColumnlldpRemoteSystemRemotePortDesc | read-only | current | The string value used to identify the description of the given port associated with the remote system. |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.7 | ColumnlldpRemoteSystemRemoteSysName | read-only | current | The string value used to identify the system name of the remote system. sys-name: system name |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.8 | ColumnlldpRemoteSystemRemoteSysDesc | read-only | current | The string value used to identify the system description of the remote system. sys-desc: system description |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.9 | ColumnlldpRemoteSystemRemoteSysCapSupported | read-only | current | This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeate… |
| 1.3.6.1.4.1.42229.1.2.4.1.3.1.1.10 | ColumnlldpRemoteSystemRemoteSysCapEnabled | read-only | current | This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeate… |
| 1.3.6.1.4.1.42229.1.2.4.1.4 | NoderemoteManAddresses | |||
| 1.3.6.1.4.1.42229.1.2.4.1.4.1 | TableremoteManAddressesTable | not-accessible | current | List of management addresses of LLDP neighbor. man:managment, remote management addresses |
| 1.3.6.1.4.1.42229.1.2.4.1.4.1.1 | RowremoteManAddressesEntry | not-accessible | current | Entry of remoteManAddressesTable |
| 1.3.6.1.4.1.42229.1.2.4.1.4.1.1.1 | ColumnremoteManAddressesRemoteManAddrSubtype | read-only | current | The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object. |
| 1.3.6.1.4.1.42229.1.2.4.1.4.1.1.2 | ColumnremoteManAddressesRemoteManAddr | read-only | current | The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management … |
| 1.3.6.1.4.1.42229.1.2.4.1.4.1.1.3 | ColumnremoteManAddressesRemoteManAddrIfSubtype | read-only | current | This attribute describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case w… |
| 1.3.6.1.4.1.42229.1.2.4.1.4.1.1.4 | ColumnremoteManAddressesRemoteManAddrIfId | read-only | current | The integer value used to identify the interface number regarding the management address component associated with the remote system. man: management addr: add… |
| 1.3.6.1.4.1.42229.1.2.4.1.4.1.1.5 | ColumnremoteManAddressesRemoteManAddrOid | read-only | current | The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent. … |
| 1.3.6.1.4.1.42229.1.2.4.1.5 | Nodeodu | |||
| 1.3.6.1.4.1.42229.1.2.4.1.5.1 | TableoduTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1 | RowoduEntry | not-accessible | current | Entry of oduTable |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.1 | ColumnodutypeL1 | read-only | current | Level 1 ODU type |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.2 | ColumnoduidL1 | read-only | current | Identifier of level 1 ODU |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.3 | ColumnodutypeL2 | read-only | current | Level 2 ODU type |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.4 | ColumnoduidL2 | read-only | current | Identifier of level 2 ODU |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.5 | ColumnodutypeL3 | read-only | current | Level 3 ODU type |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.6 | ColumnoduidL3 | read-only | current | Identifier of level 3 ODU |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.7 | ColumnodutypeL4 | read-only | current | Level 4 ODU type |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.8 | ColumnoduidL4 | read-only | current | Identifier of level 4 ODU |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.9 | ColumnoduAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.10 | ColumnoduOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.11 | ColumnoduAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.12 | ColumnoduAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.13 | ColumnoduServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.14 | ColumnoduTribSlot | read-only | current | Tributary slots of ODU, range 1 to 80 |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.15 | ColumnoduRxPayloadType | read-only | current | Received payload-type of ODU |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.16 | ColumnoduTxPayloadType | read-only | current | Transmitter payload-type of ODU |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.17 | ColumnoduNimEnable | read-only | current | The enable switching of nim function default value :enabled |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.18 | ColumnoduDelayMeasurementEnable | read-only | current | The enable switching of delay-measurement function default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.19 | ColumnoduOpuConfigActual | read-only | current | The actual opu configuration type default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.20 | ColumnoduClientSignalType | read-only | current | The ODUflex rate for special signal type default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.21 | ColumnoduExpSapi | read-only | current | The expected sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.22 | ColumnoduExpDapi | read-only | current | The expected dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.23 | ColumnoduExpOperator | read-only | current | The expected operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.24 | ColumnoduTxSapi | read-only | current | The transmitter sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.25 | ColumnoduTxDapi | read-only | current | The transmitter dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.26 | ColumnoduTxOperator | read-only | current | The transmitter operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.27 | ColumnoduTimDefectMode | read-only | current | The tim defect selection mode default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.28 | ColumnoduTimAct | read-only | current | The enable switching of inserting AIS by tim function default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.29 | ColumnoduRxSapi | read-only | current | The received sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.30 | ColumnoduRxDapi | read-only | current | The received dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.31 | ColumnoduRxOperator | read-only | current | The received operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.32 | ColumnoduDegradeInterval | read-only | current | The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes … |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.33 | ColumnoduDegradeThreshold | read-only | current | The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.34 | ColumnoduTestSignalType | read-only | current | The type mode of test signal. default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.35 | ColumnoduTestSignalEnable | read-only | current | The enable switching of test signal function default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.5.1.1.36 | ColumnoduTerminationMode | read-only | current | Termination mode for ODU. It works for trace label, nim , Delay Measurement and test signal function validation default value :terminated |
| 1.3.6.1.4.1.42229.1.2.4.1.6 | NodeoduEncryption | |||
| 1.3.6.1.4.1.42229.1.2.4.1.6.1 | TableoduEncryptionTable | not-accessible | current | Encryption function for the ODU channel. |
| 1.3.6.1.4.1.42229.1.2.4.1.6.1.1 | RowoduEncryptionEntry | not-accessible | current | Entry of oduEncryptionTable |
| 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.1 | ColumnoduEncryptionEncryptionEnable | read-only | current | Setting AES-256 encryption on OTN default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.2 | ColumnoduEncryptionBlockCipherMode | read-only | current | Specifies the block cipher mode of operation. default value :CTR |
| 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.3 | ColumnoduEncryptionEncryptionInterval | read-only | current | The encryption key rotation interval (in minutes) UNITS:minutes default value :30 |
| 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.4 | ColumnoduEncryptionEncryptionTxStatus | read-only | current | The encryption status at transmit side of the ODU, which reflects the status of both encryption data and communication sessions. |
| 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.5 | ColumnoduEncryptionEncryptionRxStatus | read-only | current | The encryption status at receive side of the ODU, which reflects the status of both encryption data and communication sessions. |
| 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.6 | ColumnoduEncryptionOduKeySyncSession | read-only | current | Indicate the associated session for the ODU channel to synchronize keys. default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.7 | ColumnoduEncryptionEncryptionTxChannelId | read-only | current | Specify channel identifier of the encrypted ODU, which shall be unique within the NE. |
| 1.3.6.1.4.1.42229.1.2.4.1.6.1.1.8 | ColumnoduEncryptionTimeToNextKey | read-only | current | The time left to rotate the ODU encryption key. UNITS:seconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.7 | NodetestSignalStatus | |||
| 1.3.6.1.4.1.42229.1.2.4.1.7.1 | TabletestSignalStatusTable | not-accessible | current | Test signal status on ODU |
| 1.3.6.1.4.1.42229.1.2.4.1.7.1.1 | RowtestSignalStatusEntry | not-accessible | current | Entry of testSignalStatusTable |
| 1.3.6.1.4.1.42229.1.2.4.1.7.1.1.1 | ColumntestSignalStatusPrbsSync | read-only | current | The test result of PRBS Synchronization default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.7.1.1.2 | ColumntestSignalStatusTestTimeDuration | read-only | current | The time duration of signal test UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.7.1.1.3 | ColumntestSignalStatusPrbsBitErrorCount | read-only | current | The counting of bit error by PRBS Synchronization |
| 1.3.6.1.4.1.42229.1.2.4.1.8 | Nodeeth40g | |||
| 1.3.6.1.4.1.42229.1.2.4.1.8.1 | Tableeth40gTable | not-accessible | current | Represents the 40GBE object. |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1 | Roweth40gEntry | not-accessible | current | Entry of eth40gTable |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.1 | Columneth40gEthFecType | read-only | current | The FEC working type of etyn port. default value :auto |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.2 | Columneth40gEthFecTypeState | read-only | current | The FEC working state of etyn port. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.3 | Columneth40gTransmitInterpacketgap | read-only | current | Specifies the minimum transmit IPG value. default value :8 |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.4 | Columneth40gGfpPayloadFcs | read-only | current | Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. def… |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.5 | Columneth40gMappingMode | read-only | current | The mapping mode of client port packets into ODUk. default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.6 | Columneth40gAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.7 | Columneth40gOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.8 | Columneth40gAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.9 | Columneth40gAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.10 | Columneth40gClientShutdown | read-only | current | The switching of client-shutdown. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.11 | Columneth40gClientShutdownHoldoffTimer | read-only | current | The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.12 | Columneth40gNearEndAls | read-only | current | The switching of near end ALS. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.13 | Columneth40gAlsDegradeMode | read-only | current | The switching of defect BERSD-ODU trig ALS default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.14 | Columneth40gLoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.15 | Columneth40gLoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.16 | Columneth40gTestSignalType | read-only | current | The type mode of test signal. default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.17 | Columneth40gTestSignalEnable | read-only | current | The enable switching of test signal function default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.18 | Columneth40gServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.19 | Columneth40gLldpStatusIf | read-only | current | Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent wi… |
| 1.3.6.1.4.1.42229.1.2.4.1.8.1.1.20 | Columneth40gHoldoffSignal | read-only | current | Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.9 | Nodeeth100g | |||
| 1.3.6.1.4.1.42229.1.2.4.1.9.1 | Tableeth100gTable | not-accessible | current | Represents the 100GBE object. |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1 | Roweth100gEntry | not-accessible | current | Entry of eth100gTable |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.1 | Columneth100gEthFecType | read-only | current | The FEC working type of etyn port. default value :auto |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.2 | Columneth100gEthFecTypeState | read-only | current | The FEC working state of etyn port. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.3 | Columneth100gTransmitInterpacketgap | read-only | current | Specifies the minimum transmit IPG value. default value :8 |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.4 | Columneth100gGfpPayloadFcs | read-only | current | Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. def… |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.5 | Columneth100gMappingMode | read-only | current | The mapping mode of client port packets into ODUk. default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.6 | Columneth100gAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.7 | Columneth100gOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.8 | Columneth100gAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.9 | Columneth100gAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.10 | Columneth100gClientShutdown | read-only | current | The switching of client-shutdown. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.11 | Columneth100gClientShutdownHoldoffTimer | read-only | current | The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.12 | Columneth100gNearEndAls | read-only | current | The switching of near end ALS. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.13 | Columneth100gAlsDegradeMode | read-only | current | The switching of defect BERSD-ODU trig ALS default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.14 | Columneth100gLoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.15 | Columneth100gLoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.16 | Columneth100gTestSignalType | read-only | current | The type mode of test signal. default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.17 | Columneth100gTestSignalEnable | read-only | current | The enable switching of test signal function default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.18 | Columneth100gServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.19 | Columneth100gLldpStatusIf | read-only | current | Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent wi… |
| 1.3.6.1.4.1.42229.1.2.4.1.9.1.1.20 | Columneth100gHoldoffSignal | read-only | current | Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.10 | Nodeotu4 | |||
| 1.3.6.1.4.1.42229.1.2.4.1.10.1 | Tableotu4Table | not-accessible | current | Represents the otu4 object |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1 | Rowotu4Entry | not-accessible | current | Entry of otu4Table |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.1 | Columnotu4FecType | read-only | current | The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709 |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.2 | Columnotu4AdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.3 | Columnotu4OperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.4 | Columnotu4AvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.5 | Columnotu4AliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.6 | Columnotu4ServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.7 | Columnotu4ExpSapi | read-only | current | The expected sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.8 | Columnotu4ExpDapi | read-only | current | The expected dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.9 | Columnotu4ExpOperator | read-only | current | The expected operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.10 | Columnotu4TxSapi | read-only | current | The transmitter sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.11 | Columnotu4TxDapi | read-only | current | The transmitter dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.12 | Columnotu4TxOperator | read-only | current | The transmitter operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.13 | Columnotu4TimDefectMode | read-only | current | The tim defect selection mode default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.14 | Columnotu4TimAct | read-only | current | The enable switching of inserting AIS by tim function default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.15 | Columnotu4RxSapi | read-only | current | The received sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.16 | Columnotu4RxDapi | read-only | current | The received dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.17 | Columnotu4RxOperator | read-only | current | The received operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.18 | Columnotu4DegradeInterval | read-only | current | The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes … |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.19 | Columnotu4DegradeThreshold | read-only | current | The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.20 | Columnotu4LoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.21 | Columnotu4LoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.22 | Columnotu4ClientShutdown | read-only | current | The switching of client-shutdown. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.23 | Columnotu4ClientShutdownHoldoffTimer | read-only | current | The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.24 | Columnotu4HoldoffSignal | read-only | current | Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.25 | Columnotu4NearEndAls | read-only | current | The switching of near end ALS. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.10.1.1.26 | Columnotu4AlsDegradeMode | read-only | current | The switching of defect BERSD-ODU trig ALS default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.11 | Nodeotu2 | |||
| 1.3.6.1.4.1.42229.1.2.4.1.11.1 | Tableotu2Table | not-accessible | current | Represents the otu2 object |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1 | Rowotu2Entry | not-accessible | current | Entry of otu2Table |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.1 | Columnotu2FecType | read-only | current | The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709 |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.2 | Columnotu2AdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.3 | Columnotu2OperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.4 | Columnotu2AvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.5 | Columnotu2AliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.6 | Columnotu2ServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.7 | Columnotu2ExpSapi | read-only | current | The expected sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.8 | Columnotu2ExpDapi | read-only | current | The expected dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.9 | Columnotu2ExpOperator | read-only | current | The expected operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.10 | Columnotu2TxSapi | read-only | current | The transmitter sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.11 | Columnotu2TxDapi | read-only | current | The transmitter dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.12 | Columnotu2TxOperator | read-only | current | The transmitter operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.13 | Columnotu2TimDefectMode | read-only | current | The tim defect selection mode default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.14 | Columnotu2TimAct | read-only | current | The enable switching of inserting AIS by tim function default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.15 | Columnotu2RxSapi | read-only | current | The received sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.16 | Columnotu2RxDapi | read-only | current | The received dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.17 | Columnotu2RxOperator | read-only | current | The received operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.18 | Columnotu2DegradeInterval | read-only | current | The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes … |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.19 | Columnotu2DegradeThreshold | read-only | current | The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.20 | Columnotu2LoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.11.1.1.21 | Columnotu2LoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.12 | Nodeotu2e | |||
| 1.3.6.1.4.1.42229.1.2.4.1.12.1 | Tableotu2eTable | not-accessible | current | Represents the otu2e object |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1 | Rowotu2eEntry | not-accessible | current | Entry of otu2eTable |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.1 | Columnotu2eFecType | read-only | current | The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709 |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.2 | Columnotu2eAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.3 | Columnotu2eOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.4 | Columnotu2eAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.5 | Columnotu2eAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.6 | Columnotu2eServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.7 | Columnotu2eExpSapi | read-only | current | The expected sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.8 | Columnotu2eExpDapi | read-only | current | The expected dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.9 | Columnotu2eExpOperator | read-only | current | The expected operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.10 | Columnotu2eTxSapi | read-only | current | The transmitter sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.11 | Columnotu2eTxDapi | read-only | current | The transmitter dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.12 | Columnotu2eTxOperator | read-only | current | The transmitter operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.13 | Columnotu2eTimDefectMode | read-only | current | The tim defect selection mode default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.14 | Columnotu2eTimAct | read-only | current | The enable switching of inserting AIS by tim function default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.15 | Columnotu2eRxSapi | read-only | current | The received sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.16 | Columnotu2eRxDapi | read-only | current | The received dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.17 | Columnotu2eRxOperator | read-only | current | The received operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.18 | Columnotu2eDegradeInterval | read-only | current | The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes … |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.19 | Columnotu2eDegradeThreshold | read-only | current | The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.20 | Columnotu2eLoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.12.1.1.21 | Columnotu2eLoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.13 | Nodefc8g | |||
| 1.3.6.1.4.1.42229.1.2.4.1.13.1 | Tablefc8gTable | not-accessible | current | Represents the FC8G object. |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1 | Rowfc8gEntry | not-accessible | current | Entry of fc8gTable |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.1 | Columnfc8gMappingMode | read-only | current | The mapping mode of client port packets into ODUk. default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.2 | Columnfc8gAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.3 | Columnfc8gOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.4 | Columnfc8gAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.5 | Columnfc8gAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.6 | Columnfc8gClientShutdown | read-only | current | The switching of client-shutdown. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.7 | Columnfc8gClientShutdownHoldoffTimer | read-only | current | The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.8 | Columnfc8gNearEndAls | read-only | current | The switching of near end ALS. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.9 | Columnfc8gAlsDegradeMode | read-only | current | The switching of defect BERSD-ODU trig ALS default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.10 | Columnfc8gLoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.11 | Columnfc8gLoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.12 | Columnfc8gTestSignalType | read-only | current | The type mode of test signal. default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.13 | Columnfc8gTestSignalEnable | read-only | current | The enable switching of test signal function default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.14 | Columnfc8gServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.13.1.1.15 | Columnfc8gHoldoffSignal | read-only | current | Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.14 | Nodefc16g | |||
| 1.3.6.1.4.1.42229.1.2.4.1.14.1 | Tablefc16gTable | not-accessible | current | Represents the FC16G object. |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1 | Rowfc16gEntry | not-accessible | current | Entry of fc16gTable |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.1 | Columnfc16gMappingMode | read-only | current | The mapping mode of client port packets into ODUk. default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.2 | Columnfc16gAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.3 | Columnfc16gOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.4 | Columnfc16gAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.5 | Columnfc16gAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.6 | Columnfc16gClientShutdown | read-only | current | The switching of client-shutdown. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.7 | Columnfc16gClientShutdownHoldoffTimer | read-only | current | The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.8 | Columnfc16gNearEndAls | read-only | current | The switching of near end ALS. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.9 | Columnfc16gAlsDegradeMode | read-only | current | The switching of defect BERSD-ODU trig ALS default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.10 | Columnfc16gLoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.11 | Columnfc16gLoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.12 | Columnfc16gTestSignalType | read-only | current | The type mode of test signal. default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.13 | Columnfc16gTestSignalEnable | read-only | current | The enable switching of test signal function default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.14 | Columnfc16gServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.14.1.1.15 | Columnfc16gHoldoffSignal | read-only | current | Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.15 | Nodeoc192 | |||
| 1.3.6.1.4.1.42229.1.2.4.1.15.1 | Tableoc192Table | not-accessible | current | Represents the OC192 object. |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1 | Rowoc192Entry | not-accessible | current | Entry of oc192Table |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.1 | Columnoc192MappingMode | read-only | current | The mapping mode of client port packets into ODUk. default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.2 | Columnoc192AdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.3 | Columnoc192OperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.4 | Columnoc192AvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.5 | Columnoc192AliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.6 | Columnoc192ClientShutdown | read-only | current | The switching of client-shutdown. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.7 | Columnoc192ClientShutdownHoldoffTimer | read-only | current | The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.8 | Columnoc192NearEndAls | read-only | current | The switching of near end ALS. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.9 | Columnoc192AlsDegradeMode | read-only | current | The switching of defect BERSD-ODU trig ALS default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.10 | Columnoc192LoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.11 | Columnoc192LoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.12 | Columnoc192TestSignalType | read-only | current | The type mode of test signal. default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.13 | Columnoc192TestSignalEnable | read-only | current | The enable switching of test signal function default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.14 | Columnoc192ServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.15 | Columnoc192ExpTrc | read-only | current | The expected trc(trail trace identification) |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.16 | Columnoc192TxTrc | read-only | current | The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm' |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.17 | Columnoc192RxTrc | read-only | current | The received trc(trail trace identification) |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.18 | Columnoc192TimAct | read-only | current | The enable switching of inserting AIS by tim function default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.19 | Columnoc192TimMonitor | read-only | current | The enable switching of tim defect monitor mode default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.20 | Columnoc192AisType | read-only | current | NULL default value :Generic-AIS |
| 1.3.6.1.4.1.42229.1.2.4.1.15.1.1.21 | Columnoc192HoldoffSignal | read-only | current | Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.16 | Nodestm64 | |||
| 1.3.6.1.4.1.42229.1.2.4.1.16.1 | Tablestm64Table | not-accessible | current | Represents the STM64 object. |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1 | Rowstm64Entry | not-accessible | current | Entry of stm64Table |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.1 | Columnstm64MappingMode | read-only | current | The mapping mode of client port packets into ODUk. default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.2 | Columnstm64AdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.3 | Columnstm64OperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.4 | Columnstm64AvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.5 | Columnstm64AliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.6 | Columnstm64ClientShutdown | read-only | current | The switching of client-shutdown. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.7 | Columnstm64ClientShutdownHoldoffTimer | read-only | current | The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.8 | Columnstm64NearEndAls | read-only | current | The switching of near end ALS. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.9 | Columnstm64AlsDegradeMode | read-only | current | The switching of defect BERSD-ODU trig ALS default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.10 | Columnstm64LoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.11 | Columnstm64LoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.12 | Columnstm64TestSignalType | read-only | current | The type mode of test signal. default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.13 | Columnstm64TestSignalEnable | read-only | current | The enable switching of test signal function default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.14 | Columnstm64ServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.15 | Columnstm64ExpTrc | read-only | current | The expected trc(trail trace identification) |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.16 | Columnstm64TxTrc | read-only | current | The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm' |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.17 | Columnstm64RxTrc | read-only | current | The received trc(trail trace identification) |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.18 | Columnstm64TimAct | read-only | current | The enable switching of inserting AIS by tim function default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.19 | Columnstm64TimMonitor | read-only | current | The enable switching of tim defect monitor mode default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.20 | Columnstm64AisType | read-only | current | NULL default value :Generic-AIS |
| 1.3.6.1.4.1.42229.1.2.4.1.16.1.1.21 | Columnstm64HoldoffSignal | read-only | current | Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.17 | Nodeotuc2 | |||
| 1.3.6.1.4.1.42229.1.2.4.1.17.1 | Tableotuc2Table | not-accessible | current | Represents the otuc2 object |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1 | Rowotuc2Entry | not-accessible | current | Entry of otuc2Table |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.1 | Columnotuc2FecType | read-only | current | The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709 |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.2 | Columnotuc2AdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.3 | Columnotuc2OperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.4 | Columnotuc2AvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.5 | Columnotuc2AliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.6 | Columnotuc2ServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.7 | Columnotuc2ExpSapi | read-only | current | The expected sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.8 | Columnotuc2ExpDapi | read-only | current | The expected dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.9 | Columnotuc2ExpOperator | read-only | current | The expected operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.10 | Columnotuc2TxSapi | read-only | current | The transmitter sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.11 | Columnotuc2TxDapi | read-only | current | The transmitter dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.12 | Columnotuc2TxOperator | read-only | current | The transmitter operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.13 | Columnotuc2TimDefectMode | read-only | current | The tim defect selection mode default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.14 | Columnotuc2TimAct | read-only | current | The enable switching of inserting AIS by tim function default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.15 | Columnotuc2RxSapi | read-only | current | The received sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.16 | Columnotuc2RxDapi | read-only | current | The received dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.17 | Columnotuc2RxOperator | read-only | current | The received operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.18 | Columnotuc2DegradeInterval | read-only | current | The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes … |
| 1.3.6.1.4.1.42229.1.2.4.1.17.1.1.19 | Columnotuc2DegradeThreshold | read-only | current | The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 |
| 1.3.6.1.4.1.42229.1.2.4.1.18 | Nodeotuc3 | |||
| 1.3.6.1.4.1.42229.1.2.4.1.18.1 | Tableotuc3Table | not-accessible | current | Represents the otuc3 object |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1 | Rowotuc3Entry | not-accessible | current | Entry of otuc3Table |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.1 | Columnotuc3FecType | read-only | current | The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709 |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.2 | Columnotuc3AdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.3 | Columnotuc3OperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.4 | Columnotuc3AvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.5 | Columnotuc3AliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.6 | Columnotuc3ServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.7 | Columnotuc3ExpSapi | read-only | current | The expected sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.8 | Columnotuc3ExpDapi | read-only | current | The expected dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.9 | Columnotuc3ExpOperator | read-only | current | The expected operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.10 | Columnotuc3TxSapi | read-only | current | The transmitter sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.11 | Columnotuc3TxDapi | read-only | current | The transmitter dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.12 | Columnotuc3TxOperator | read-only | current | The transmitter operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.13 | Columnotuc3TimDefectMode | read-only | current | The tim defect selection mode default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.14 | Columnotuc3TimAct | read-only | current | The enable switching of inserting AIS by tim function default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.15 | Columnotuc3RxSapi | read-only | current | The received sapi(Source Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.16 | Columnotuc3RxDapi | read-only | current | The received dapi(Destination Access Point Identifier) |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.17 | Columnotuc3RxOperator | read-only | current | The received operator TTI |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.18 | Columnotuc3DegradeInterval | read-only | current | The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes … |
| 1.3.6.1.4.1.42229.1.2.4.1.18.1.1.19 | Columnotuc3DegradeThreshold | read-only | current | The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1 |
| 1.3.6.1.4.1.42229.1.2.4.1.19 | NodeochOs | |||
| 1.3.6.1.4.1.42229.1.2.4.1.19.1 | TableochOsTable | not-accessible | current | Represents the och-os MO |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1 | RowochOsEntry | not-accessible | current | Entry of ochOsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.1 | ColumnochOsModulationFormat | read-only | current | Currently och-os modulation format |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.2 | ColumnochOsLineEncoding | read-only | current | Currently line-encoding mode |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.3 | ColumnochOsFrequency | read-only | current | The laser frequency. For tx-lo-independent laser-type, it set the tx laser frequency only. UNITS:MHz default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.4 | ColumnochOsActualFrequency | read-only | current | The actual laser frequency. If rx-frequency is 0, it reflects both Rx and Tx frequency for coherent interface. UNITS:MHz default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.5 | ColumnochOsRxFrequency | read-only | current | The rx laser frequency. Special for 0 means it is same as tx laser frequency. Conditions:../../possible-pluggable-types != 'SFP+' UNITS:MHz default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.6 | ColumnochOsActualRxFrequency | read-only | current | The actual rx laser frequency for coherent interface with separating Lo laser from Tx. 0 means Lo and Tx share the same laser where 'frequency' attriute will i… |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.7 | ColumnochOsLaserEnable | read-only | current | The enable switching of output laser. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.8 | ColumnochOsRequiredTxOpticalPower | read-only | current | This is to support adjustable optical power of Line side. default value :1.0 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.9 | ColumnochOsActualTxOpticalPower | read-only | current | This is the actual transmitting optical power of Line side. default value :-99.0 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.10 | ColumnochOsFecType | read-only | current | The FEC type of och-os default value :SDFEC25 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.11 | ColumnochOsRxAttenuation | read-only | current | This is to support configurable optical attenuation at receiver side which is based on the hardware capability on the port. default value :0.0 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.12 | ColumnochOsTxFilterRollOff | read-only | current | Transmitter filter roll off factor. default value :0.2 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.13 | ColumnochOsPreemphasis | read-only | current | Preemphasis of transmitted signal. default value :enabled |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.14 | ColumnochOsPreemphasisValue | read-only | current | Preemphasis of transmitted signal. default value :1.0 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.15 | ColumnochOsAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.16 | ColumnochOsOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.17 | ColumnochOsAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.18 | ColumnochOsAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.19 | ColumnochOsLoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.20 | ColumnochOsLoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.21 | ColumnochOsServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.22 | ColumnochOsDGD | read-only | current | Value of Differential Group Delay UNITS:ps |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.23 | ColumnochOsCD | read-only | current | Value of Chromatic Dispersion UNITS:ps/nm |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.24 | ColumnochOsOSNR | read-only | current | Current value of OSNR. The result could be OSNR value with dB |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.25 | ColumnochOsQFactor | read-only | current | Current value of Q-factor |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.26 | ColumnochOsPreFecBer | read-only | current | Current value of PreFEC Bit Error Ratio. default value :-99.0 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.27 | ColumnochOsCdRangeLow | read-only | current | low value of chromatic dispersion search range. UNITS:ps/nm default value :-45000 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.28 | ColumnochOsCdRangeHigh | read-only | current | high value of chromatic dispersion search range. UNITS:ps/nm default value :45000 |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.29 | ColumnochOsPropagateShutdown | read-only | current | When the attribute value is set to yes, the transmit laser will be shutdown if the whole service of the direction has signal failure, the function mainly used … |
| 1.3.6.1.4.1.42229.1.2.4.1.19.1.1.31 | ColumnochOsFastSopMode | read-only | current | Specify if enable fast SOP (state of polarization) change tracking; if enabled, the interface will tolerate very fast SOP and transient. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.30 | Nodewan10gSonet | |||
| 1.3.6.1.4.1.42229.1.2.4.1.30.1 | Tablewan10gSonetTable | not-accessible | current | Represents the 10GWAN_SONET object. |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1 | Rowwan10gSonetEntry | not-accessible | current | Entry of wan10gSonetTable |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.1 | Columnwan10gSonetMappingMode | read-only | current | The mapping mode of client port packets into ODUk. default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.2 | Columnwan10gSonetAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.3 | Columnwan10gSonetOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.4 | Columnwan10gSonetAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.5 | Columnwan10gSonetAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.6 | Columnwan10gSonetClientShutdown | read-only | current | The switching of client-shutdown. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.7 | Columnwan10gSonetClientShutdownHoldoffTimer | read-only | current | The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.8 | Columnwan10gSonetHoldoffSignal | read-only | current | Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.9 | Columnwan10gSonetNearEndAls | read-only | current | The switching of near end ALS. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.10 | Columnwan10gSonetAlsDegradeMode | read-only | current | The switching of defect BERSD-ODU trig ALS default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.11 | Columnwan10gSonetLoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.12 | Columnwan10gSonetLoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.13 | Columnwan10gSonetTestSignalType | read-only | current | The type mode of test signal. default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.14 | Columnwan10gSonetTestSignalEnable | read-only | current | The enable switching of test signal function default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.15 | Columnwan10gSonetServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.16 | Columnwan10gSonetExpTrc | read-only | current | The expected trc(trail trace identification) |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.17 | Columnwan10gSonetTxTrc | read-only | current | The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm' |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.18 | Columnwan10gSonetRxTrc | read-only | current | The received trc(trail trace identification) |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.19 | Columnwan10gSonetTimAct | read-only | current | The enable switching of inserting AIS by tim function default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.20 | Columnwan10gSonetTimMonitor | read-only | current | The enable switching of tim defect monitor mode default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.30.1.1.21 | Columnwan10gSonetAisType | read-only | current | NULL default value :Generic-AIS |
| 1.3.6.1.4.1.42229.1.2.4.1.31 | Nodewan10gSdh | |||
| 1.3.6.1.4.1.42229.1.2.4.1.31.1 | Tablewan10gSdhTable | not-accessible | current | Represents the 10GWAN_SDH object. |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1 | Rowwan10gSdhEntry | not-accessible | current | Entry of wan10gSdhTable |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.1 | Columnwan10gSdhMappingMode | read-only | current | The mapping mode of client port packets into ODUk. default value :not-applicable |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.2 | Columnwan10gSdhAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.3 | Columnwan10gSdhOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.4 | Columnwan10gSdhAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.5 | Columnwan10gSdhAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.6 | Columnwan10gSdhClientShutdown | read-only | current | The switching of client-shutdown. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.7 | Columnwan10gSdhClientShutdownHoldoffTimer | read-only | current | The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0 |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.8 | Columnwan10gSdhHoldoffSignal | read-only | current | Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.9 | Columnwan10gSdhNearEndAls | read-only | current | The switching of near end ALS. default value :no |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.10 | Columnwan10gSdhAlsDegradeMode | read-only | current | The switching of defect BERSD-ODU trig ALS default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.11 | Columnwan10gSdhLoopbackEnable | read-only | current | The enable switching of loopback function. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.12 | Columnwan10gSdhLoopbackType | read-only | current | The type mode of loopback function default value :none |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.13 | Columnwan10gSdhTestSignalType | read-only | current | The type mode of test signal. default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.14 | Columnwan10gSdhTestSignalEnable | read-only | current | The enable switching of test signal function default value :NONE |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.15 | Columnwan10gSdhServiceLabel | read-only | current | Path/service name of cross-connection related facility. |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.16 | Columnwan10gSdhExpTrc | read-only | current | The expected trc(trail trace identification) |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.17 | Columnwan10gSdhTxTrc | read-only | current | The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm' |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.18 | Columnwan10gSdhRxTrc | read-only | current | The received trc(trail trace identification) |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.19 | Columnwan10gSdhTimAct | read-only | current | The enable switching of inserting AIS by tim function default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.20 | Columnwan10gSdhTimMonitor | read-only | current | The enable switching of tim defect monitor mode default value :disabled |
| 1.3.6.1.4.1.42229.1.2.4.1.31.1.1.21 | Columnwan10gSdhAisType | read-only | current | NULL default value :Generic-AIS |
| 1.3.6.1.4.1.42229.1.2.4.1.32 | Nodeeth10gStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.32.1 | Tableeth10gStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1 | Roweth10gStatisticsEntry | not-accessible | current | Entry of eth10gStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.1 | Columneth10gStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.2 | Columneth10gStatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.3 | Columneth10gStatisticsEntryBitErrorFec | read-only | current | the statistics bits counting for error bit forward error correction UNITS:bits |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.4 | Columneth10gStatisticsEntryUncorrectedBlockErrorFec | read-only | current | the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.5 | Columneth10gStatisticsEntryInSymbolErrors | read-only | current | the statistics Times counting for input signal symbol errors UNITS:Events |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.6 | Columneth10gStatisticsEntryInDropEvents | read-only | current | the statistics counting for input signal drop events UNITS:events |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.7 | Columneth10gStatisticsEntryInOctets | read-only | current | the statistics counting for input signal octets UNITS:octets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.8 | Columneth10gStatisticsEntryInPackets | read-only | current | the statistics counting for input signal packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.9 | Columneth10gStatisticsEntryInBroadcastPackets | read-only | current | the statistics counting for input broadcast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.10 | Columneth10gStatisticsEntryInMulticastPackets | read-only | current | the statistics counting for input multicast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.11 | Columneth10gStatisticsEntryInCrcAlignErrors | read-only | current | the statistics counting for input CRC error packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.12 | Columneth10gStatisticsEntryInUndersizePackets | read-only | current | the statistics counting for input undersize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.13 | Columneth10gStatisticsEntryInOversizePackets | read-only | current | the statistics counting for input oversize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.14 | Columneth10gStatisticsEntryInFragments | read-only | current | the statistics counting for input fragment packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.15 | Columneth10gStatisticsEntryInJabbers | read-only | current | the statistics counting for input jabber packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.16 | Columneth10gStatisticsEntryInPackets64octets | read-only | current | the statistics counting for input 64 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.17 | Columneth10gStatisticsEntryInPackets65to127octets | read-only | current | the statistics counting for input 65 to 127 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.18 | Columneth10gStatisticsEntryInPackets128to255octets | read-only | current | the statistics counting for input 128 to 255 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.19 | Columneth10gStatisticsEntryInPackets256to511octets | read-only | current | the statistics counting for input 256 to 511 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.20 | Columneth10gStatisticsEntryInPackets512to1023octets | read-only | current | the statistics counting for input 512 to 1023 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.21 | Columneth10gStatisticsEntryInPackets1024to1518octets | read-only | current | the statistics counting for input 1024 to 1518 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.22 | Columneth10gStatisticsEntryOutSymbolErrors | read-only | current | the statistics Times counting for output signal symbol errors UNITS:Events |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.23 | Columneth10gStatisticsEntryOutDropEvents | read-only | current | the statistics counting for output signal drop events UNITS:events |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.24 | Columneth10gStatisticsEntryOutOctets | read-only | current | the statistics counting for output signal octets UNITS:octets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.25 | Columneth10gStatisticsEntryOutPackets | read-only | current | the statistics counting for output signal packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.26 | Columneth10gStatisticsEntryOutBroadcastPackets | read-only | current | the statistics counting for output broadcast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.27 | Columneth10gStatisticsEntryOutMulticastPackets | read-only | current | the statistics counting for output multicast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.28 | Columneth10gStatisticsEntryOutCrcAlignErrors | read-only | current | the statistics counting for output CRC error packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.29 | Columneth10gStatisticsEntryOutUndersizePackets | read-only | current | the statistics counting for output undersize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.30 | Columneth10gStatisticsEntryOutOversizePackets | read-only | current | the statistics counting for output oversize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.31 | Columneth10gStatisticsEntryOutFragments | read-only | current | the statistics counting for output fragment packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.32 | Columneth10gStatisticsEntryOutJabbers | read-only | current | the statistics counting for output jabber packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.33 | Columneth10gStatisticsEntryOutPackets64octets | read-only | current | the statistics counting for output 64 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.34 | Columneth10gStatisticsEntryOutPackets65to127octets | read-only | current | the statistics counting for output 65 to 127 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.35 | Columneth10gStatisticsEntryOutPackets128to255octets | read-only | current | the statistics counting for output 128 to 255 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.36 | Columneth10gStatisticsEntryOutPackets256to511octets | read-only | current | the statistics counting for output 256 to 511 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.37 | Columneth10gStatisticsEntryOutPackets512to1023octets | read-only | current | the statistics counting for output 512 to 1023 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.32.1.1.38 | Columneth10gStatisticsEntryOutPackets1024to1518octets | read-only | current | the statistics counting for output 1024 to 1518 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.33 | NodeoduStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.33.1 | TableoduStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.33.1.1 | RowoduStatisticsEntry | not-accessible | current | Entry of oduStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.1 | ColumnoduStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.2 | ColumnoduStatisticsEntryErroredBlocks | read-only | current | the statistics counting for errored blocks UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.3 | ColumnoduStatisticsEntryErroredSeconds | read-only | current | the statistics seconds counting for errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.4 | ColumnoduStatisticsEntrySeverelyErroredSeconds | read-only | current | the statistics seconds counting for severely errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.5 | ColumnoduStatisticsEntryUnavailableSeconds | read-only | current | the statistics seconds counting for unavailable signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.33.1.1.6 | ColumnoduStatisticsEntryEncryptionFailRx | read-only | current | Failed Encryption Frames of Receive side UNITS:frames |
| 1.3.6.1.4.1.42229.1.2.4.1.34 | Nodeeth40gStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.34.1 | Tableeth40gStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1 | Roweth40gStatisticsEntry | not-accessible | current | Entry of eth40gStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.1 | Columneth40gStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.2 | Columneth40gStatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.3 | Columneth40gStatisticsEntryBitErrorFec | read-only | current | the statistics bits counting for error bit forward error correction UNITS:bits |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.4 | Columneth40gStatisticsEntryUncorrectedBlockErrorFec | read-only | current | the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.5 | Columneth40gStatisticsEntryInSymbolErrors | read-only | current | the statistics Times counting for input signal symbol errors UNITS:Events |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.6 | Columneth40gStatisticsEntryInDropEvents | read-only | current | the statistics counting for input signal drop events UNITS:events |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.7 | Columneth40gStatisticsEntryInOctets | read-only | current | the statistics counting for input signal octets UNITS:octets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.8 | Columneth40gStatisticsEntryInPackets | read-only | current | the statistics counting for input signal packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.9 | Columneth40gStatisticsEntryInBroadcastPackets | read-only | current | the statistics counting for input broadcast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.10 | Columneth40gStatisticsEntryInMulticastPackets | read-only | current | the statistics counting for input multicast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.11 | Columneth40gStatisticsEntryInCrcAlignErrors | read-only | current | the statistics counting for input CRC error packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.12 | Columneth40gStatisticsEntryInUndersizePackets | read-only | current | the statistics counting for input undersize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.13 | Columneth40gStatisticsEntryInOversizePackets | read-only | current | the statistics counting for input oversize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.14 | Columneth40gStatisticsEntryInFragments | read-only | current | the statistics counting for input fragment packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.15 | Columneth40gStatisticsEntryInJabbers | read-only | current | the statistics counting for input jabber packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.16 | Columneth40gStatisticsEntryInPackets64octets | read-only | current | the statistics counting for input 64 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.17 | Columneth40gStatisticsEntryInPackets65to127octets | read-only | current | the statistics counting for input 65 to 127 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.18 | Columneth40gStatisticsEntryInPackets128to255octets | read-only | current | the statistics counting for input 128 to 255 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.19 | Columneth40gStatisticsEntryInPackets256to511octets | read-only | current | the statistics counting for input 256 to 511 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.20 | Columneth40gStatisticsEntryInPackets512to1023octets | read-only | current | the statistics counting for input 512 to 1023 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.21 | Columneth40gStatisticsEntryInPackets1024to1518octets | read-only | current | the statistics counting for input 1024 to 1518 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.22 | Columneth40gStatisticsEntryOutSymbolErrors | read-only | current | the statistics Times counting for output signal symbol errors UNITS:Events |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.23 | Columneth40gStatisticsEntryOutDropEvents | read-only | current | the statistics counting for output signal drop events UNITS:events |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.24 | Columneth40gStatisticsEntryOutOctets | read-only | current | the statistics counting for output signal octets UNITS:octets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.25 | Columneth40gStatisticsEntryOutPackets | read-only | current | the statistics counting for output signal packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.26 | Columneth40gStatisticsEntryOutBroadcastPackets | read-only | current | the statistics counting for output broadcast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.27 | Columneth40gStatisticsEntryOutMulticastPackets | read-only | current | the statistics counting for output multicast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.28 | Columneth40gStatisticsEntryOutCrcAlignErrors | read-only | current | the statistics counting for output CRC error packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.29 | Columneth40gStatisticsEntryOutUndersizePackets | read-only | current | the statistics counting for output undersize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.30 | Columneth40gStatisticsEntryOutOversizePackets | read-only | current | the statistics counting for output oversize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.31 | Columneth40gStatisticsEntryOutFragments | read-only | current | the statistics counting for output fragment packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.32 | Columneth40gStatisticsEntryOutJabbers | read-only | current | the statistics counting for output jabber packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.33 | Columneth40gStatisticsEntryOutPackets64octets | read-only | current | the statistics counting for output 64 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.34 | Columneth40gStatisticsEntryOutPackets65to127octets | read-only | current | the statistics counting for output 65 to 127 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.35 | Columneth40gStatisticsEntryOutPackets128to255octets | read-only | current | the statistics counting for output 128 to 255 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.36 | Columneth40gStatisticsEntryOutPackets256to511octets | read-only | current | the statistics counting for output 256 to 511 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.37 | Columneth40gStatisticsEntryOutPackets512to1023octets | read-only | current | the statistics counting for output 512 to 1023 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.34.1.1.38 | Columneth40gStatisticsEntryOutPackets1024to1518octets | read-only | current | the statistics counting for output 1024 to 1518 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35 | Nodeeth100gStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.35.1 | Tableeth100gStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1 | Roweth100gStatisticsEntry | not-accessible | current | Entry of eth100gStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.1 | Columneth100gStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.2 | Columneth100gStatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.3 | Columneth100gStatisticsEntryBitErrorFec | read-only | current | the statistics bits counting for error bit forward error correction UNITS:bits |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.4 | Columneth100gStatisticsEntryUncorrectedBlockErrorFec | read-only | current | the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.5 | Columneth100gStatisticsEntryInSymbolErrors | read-only | current | the statistics Times counting for input signal symbol errors UNITS:Events |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.6 | Columneth100gStatisticsEntryInDropEvents | read-only | current | the statistics counting for input signal drop events UNITS:events |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.7 | Columneth100gStatisticsEntryInOctets | read-only | current | the statistics counting for input signal octets UNITS:octets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.8 | Columneth100gStatisticsEntryInPackets | read-only | current | the statistics counting for input signal packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.9 | Columneth100gStatisticsEntryInBroadcastPackets | read-only | current | the statistics counting for input broadcast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.10 | Columneth100gStatisticsEntryInMulticastPackets | read-only | current | the statistics counting for input multicast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.11 | Columneth100gStatisticsEntryInCrcAlignErrors | read-only | current | the statistics counting for input CRC error packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.12 | Columneth100gStatisticsEntryInUndersizePackets | read-only | current | the statistics counting for input undersize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.13 | Columneth100gStatisticsEntryInOversizePackets | read-only | current | the statistics counting for input oversize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.14 | Columneth100gStatisticsEntryInFragments | read-only | current | the statistics counting for input fragment packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.15 | Columneth100gStatisticsEntryInJabbers | read-only | current | the statistics counting for input jabber packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.16 | Columneth100gStatisticsEntryInPackets64octets | read-only | current | the statistics counting for input 64 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.17 | Columneth100gStatisticsEntryInPackets65to127octets | read-only | current | the statistics counting for input 65 to 127 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.18 | Columneth100gStatisticsEntryInPackets128to255octets | read-only | current | the statistics counting for input 128 to 255 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.19 | Columneth100gStatisticsEntryInPackets256to511octets | read-only | current | the statistics counting for input 256 to 511 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.20 | Columneth100gStatisticsEntryInPackets512to1023octets | read-only | current | the statistics counting for input 512 to 1023 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.21 | Columneth100gStatisticsEntryInPackets1024to1518octets | read-only | current | the statistics counting for input 1024 to 1518 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.22 | Columneth100gStatisticsEntryOutSymbolErrors | read-only | current | the statistics Times counting for output signal symbol errors UNITS:Events |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.23 | Columneth100gStatisticsEntryOutDropEvents | read-only | current | the statistics counting for output signal drop events UNITS:events |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.24 | Columneth100gStatisticsEntryOutOctets | read-only | current | the statistics counting for output signal octets UNITS:octets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.25 | Columneth100gStatisticsEntryOutPackets | read-only | current | the statistics counting for output signal packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.26 | Columneth100gStatisticsEntryOutBroadcastPackets | read-only | current | the statistics counting for output broadcast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.27 | Columneth100gStatisticsEntryOutMulticastPackets | read-only | current | the statistics counting for output multicast packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.28 | Columneth100gStatisticsEntryOutCrcAlignErrors | read-only | current | the statistics counting for output CRC error packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.29 | Columneth100gStatisticsEntryOutUndersizePackets | read-only | current | the statistics counting for output undersize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.30 | Columneth100gStatisticsEntryOutOversizePackets | read-only | current | the statistics counting for output oversize packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.31 | Columneth100gStatisticsEntryOutFragments | read-only | current | the statistics counting for output fragment packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.32 | Columneth100gStatisticsEntryOutJabbers | read-only | current | the statistics counting for output jabber packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.33 | Columneth100gStatisticsEntryOutPackets64octets | read-only | current | the statistics counting for output 64 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.34 | Columneth100gStatisticsEntryOutPackets65to127octets | read-only | current | the statistics counting for output 65 to 127 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.35 | Columneth100gStatisticsEntryOutPackets128to255octets | read-only | current | the statistics counting for output 128 to 255 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.36 | Columneth100gStatisticsEntryOutPackets256to511octets | read-only | current | the statistics counting for output 256 to 511 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.37 | Columneth100gStatisticsEntryOutPackets512to1023octets | read-only | current | the statistics counting for output 512 to 1023 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.35.1.1.38 | Columneth100gStatisticsEntryOutPackets1024to1518octets | read-only | current | the statistics counting for output 1024 to 1518 octets packets UNITS:packets |
| 1.3.6.1.4.1.42229.1.2.4.1.36 | Nodeotu4Statistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.36.1 | Tableotu4StatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.36.1.1 | Rowotu4StatisticsEntry | not-accessible | current | Entry of otu4StatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.1 | Columnotu4StatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.2 | Columnotu4StatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.3 | Columnotu4StatisticsEntryBitErrorFec | read-only | current | the statistics bits counting for error bit forward error correction UNITS:bits |
| 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.4 | Columnotu4StatisticsEntryUncorrectedBlockErrorFec | read-only | current | the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.5 | Columnotu4StatisticsEntryErroredBlocks | read-only | current | the statistics counting for errored blocks UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.6 | Columnotu4StatisticsEntryErroredSeconds | read-only | current | the statistics seconds counting for errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.7 | Columnotu4StatisticsEntrySeverelyErroredSeconds | read-only | current | the statistics seconds counting for severely errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.36.1.1.8 | Columnotu4StatisticsEntryUnavailableSeconds | read-only | current | the statistics seconds counting for unavailable signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.37 | Nodeotu2Statistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.37.1 | Tableotu2StatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.37.1.1 | Rowotu2StatisticsEntry | not-accessible | current | Entry of otu2StatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.1 | Columnotu2StatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.2 | Columnotu2StatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.3 | Columnotu2StatisticsEntryBitErrorFec | read-only | current | the statistics bits counting for error bit forward error correction UNITS:bits |
| 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.4 | Columnotu2StatisticsEntryUncorrectedBlockErrorFec | read-only | current | the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.5 | Columnotu2StatisticsEntryErroredBlocks | read-only | current | the statistics counting for errored blocks UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.6 | Columnotu2StatisticsEntryErroredSeconds | read-only | current | the statistics seconds counting for errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.7 | Columnotu2StatisticsEntrySeverelyErroredSeconds | read-only | current | the statistics seconds counting for severely errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.37.1.1.8 | Columnotu2StatisticsEntryUnavailableSeconds | read-only | current | the statistics seconds counting for unavailable signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.38 | Nodeotu2eStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.38.1 | Tableotu2eStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.38.1.1 | Rowotu2eStatisticsEntry | not-accessible | current | Entry of otu2eStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.1 | Columnotu2eStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.2 | Columnotu2eStatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.3 | Columnotu2eStatisticsEntryBitErrorFec | read-only | current | the statistics bits counting for error bit forward error correction UNITS:bits |
| 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.4 | Columnotu2eStatisticsEntryUncorrectedBlockErrorFec | read-only | current | the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.5 | Columnotu2eStatisticsEntryErroredBlocks | read-only | current | the statistics counting for errored blocks UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.6 | Columnotu2eStatisticsEntryErroredSeconds | read-only | current | the statistics seconds counting for errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.7 | Columnotu2eStatisticsEntrySeverelyErroredSeconds | read-only | current | the statistics seconds counting for severely errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.38.1.1.8 | Columnotu2eStatisticsEntryUnavailableSeconds | read-only | current | the statistics seconds counting for unavailable signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.39 | Nodeoc192Statistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.39.1 | Tableoc192StatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.39.1.1 | Rowoc192StatisticsEntry | not-accessible | current | Entry of oc192StatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.1 | Columnoc192StatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.2 | Columnoc192StatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.3 | Columnoc192StatisticsEntryInCodingViolation | read-only | current | the statistics bits counting for ingress coding violation UNITS:bits |
| 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.4 | Columnoc192StatisticsEntryInErroredSeconds | read-only | current | the statistics seconds counting for RX errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.5 | Columnoc192StatisticsEntryInSeverelyErroredSeconds | read-only | current | the statistics seconds counting for RX severely errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.6 | Columnoc192StatisticsEntryInUnavailableSeconds | read-only | current | the statistics seconds counting for RX unavailable signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.39.1.1.7 | Columnoc192StatisticsEntryInSeverelyErroredFrameSecond | read-only | current | the statistics seconds counting for ingress signal frame severely errored UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.40 | Nodestm64Statistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.40.1 | Tablestm64StatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.40.1.1 | Rowstm64StatisticsEntry | not-accessible | current | Entry of stm64StatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.1 | Columnstm64StatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.2 | Columnstm64StatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.3 | Columnstm64StatisticsEntryInBackgroundBlockError | read-only | current | the statistics counting for ingress errored blocks UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.4 | Columnstm64StatisticsEntryInErroredSeconds | read-only | current | the statistics seconds counting for RX errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.5 | Columnstm64StatisticsEntryInSeverelyErroredSeconds | read-only | current | the statistics seconds counting for RX severely errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.6 | Columnstm64StatisticsEntryInUnavailableSeconds | read-only | current | the statistics seconds counting for RX unavailable signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.40.1.1.7 | Columnstm64StatisticsEntryInOutOfFrameSeconds | read-only | current | the statistics seconds counting for ingress signal lose of frame UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.41 | Nodewan10gSonetStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.41.1 | Tablewan10gSonetStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.41.1.1 | Rowwan10gSonetStatisticsEntry | not-accessible | current | Entry of wan10gSonetStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.1 | Columnwan10gSonetStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.2 | Columnwan10gSonetStatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.3 | Columnwan10gSonetStatisticsEntryInCodingViolation | read-only | current | the statistics bits counting for ingress coding violation UNITS:bits |
| 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.4 | Columnwan10gSonetStatisticsEntryInErroredSeconds | read-only | current | the statistics seconds counting for RX errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.5 | Columnwan10gSonetStatisticsEntryInSeverelyErroredSeconds | read-only | current | the statistics seconds counting for RX severely errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.6 | Columnwan10gSonetStatisticsEntryInUnavailableSeconds | read-only | current | the statistics seconds counting for RX unavailable signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.41.1.1.7 | Columnwan10gSonetStatisticsEntryInSeverelyErroredFrameSecond | read-only | current | the statistics seconds counting for ingress signal frame severely errored UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.42 | Nodewan10gSdhStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.42.1 | Tablewan10gSdhStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.42.1.1 | Rowwan10gSdhStatisticsEntry | not-accessible | current | Entry of wan10gSdhStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.1 | Columnwan10gSdhStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.2 | Columnwan10gSdhStatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.3 | Columnwan10gSdhStatisticsEntryInBackgroundBlockError | read-only | current | the statistics counting for ingress errored blocks UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.4 | Columnwan10gSdhStatisticsEntryInErroredSeconds | read-only | current | the statistics seconds counting for RX errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.5 | Columnwan10gSdhStatisticsEntryInSeverelyErroredSeconds | read-only | current | the statistics seconds counting for RX severely errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.6 | Columnwan10gSdhStatisticsEntryInUnavailableSeconds | read-only | current | the statistics seconds counting for RX unavailable signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.42.1.1.7 | Columnwan10gSdhStatisticsEntryInOutOfFrameSeconds | read-only | current | the statistics seconds counting for ingress signal lose of frame UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.43 | Nodefc8gStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.43.1 | Tablefc8gStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.43.1.1 | Rowfc8gStatisticsEntry | not-accessible | current | Entry of fc8gStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.43.1.1.1 | Columnfc8gStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.43.1.1.2 | Columnfc8gStatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.43.1.1.3 | Columnfc8gStatisticsEntryInSymbolErrors | read-only | current | the statistics Times counting for signal symbol errors UNITS:Events |
| 1.3.6.1.4.1.42229.1.2.4.1.44 | Nodefc16gStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.44.1 | Tablefc16gStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.44.1.1 | Rowfc16gStatisticsEntry | not-accessible | current | Entry of fc16gStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.44.1.1.1 | Columnfc16gStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.44.1.1.2 | Columnfc16gStatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.44.1.1.3 | Columnfc16gStatisticsEntryInSymbolErrors | read-only | current | the statistics Times counting for signal symbol errors UNITS:Events |
| 1.3.6.1.4.1.42229.1.2.4.1.45 | Nodeotuc2Statistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.45.1 | Tableotuc2StatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.45.1.1 | Rowotuc2StatisticsEntry | not-accessible | current | Entry of otuc2StatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.1 | Columnotuc2StatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.2 | Columnotuc2StatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.3 | Columnotuc2StatisticsEntryBitErrorFec | read-only | current | the statistics bits counting for error bit forward error correction UNITS:bits |
| 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.4 | Columnotuc2StatisticsEntryUncorrectedBlockErrorFec | read-only | current | the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.5 | Columnotuc2StatisticsEntryErroredBlocks | read-only | current | the statistics counting for errored blocks UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.6 | Columnotuc2StatisticsEntryErroredSeconds | read-only | current | the statistics seconds counting for errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.7 | Columnotuc2StatisticsEntrySeverelyErroredSeconds | read-only | current | the statistics seconds counting for severely errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.45.1.1.8 | Columnotuc2StatisticsEntryUnavailableSeconds | read-only | current | the statistics seconds counting for unavailable signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.46 | Nodeotuc3Statistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.46.1 | Tableotuc3StatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.46.1.1 | Rowotuc3StatisticsEntry | not-accessible | current | Entry of otuc3StatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.1 | Columnotuc3StatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.2 | Columnotuc3StatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.3 | Columnotuc3StatisticsEntryBitErrorFec | read-only | current | the statistics bits counting for error bit forward error correction UNITS:bits |
| 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.4 | Columnotuc3StatisticsEntryUncorrectedBlockErrorFec | read-only | current | the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.5 | Columnotuc3StatisticsEntryErroredBlocks | read-only | current | the statistics counting for errored blocks UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.6 | Columnotuc3StatisticsEntryErroredSeconds | read-only | current | the statistics seconds counting for errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.7 | Columnotuc3StatisticsEntrySeverelyErroredSeconds | read-only | current | the statistics seconds counting for severely errored signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.46.1.1.8 | Columnotuc3StatisticsEntryUnavailableSeconds | read-only | current | the statistics seconds counting for unavailable signal UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.47 | NodeochOsStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.1.47.1 | TableochOsStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.1.47.1.1 | RowochOsStatisticsEntry | not-accessible | current | Entry of ochOsStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.1.47.1.1.1 | ColumnochOsStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.1.47.1.1.2 | ColumnochOsStatisticsEntryLossOfSignalSeconds | read-only | current | the statistics seconds counting for signal loss UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.1.47.1.1.3 | ColumnochOsStatisticsEntryBitErrorFec | read-only | current | the statistics bits counting for error bit forward error correction UNITS:bits |
| 1.3.6.1.4.1.42229.1.2.4.1.47.1.1.4 | ColumnochOsStatisticsEntryUncorrectedBlockErrorFec | read-only | current | the statistics blocks counting for uncorrected block error forward error correction UNITS:blocks |
| 1.3.6.1.4.1.42229.1.2.4.3 | NodecRS | |||
| 1.3.6.1.4.1.42229.1.2.4.3.1 | TablecRSTable | not-accessible | current | Cross connection table. |
| 1.3.6.1.4.1.42229.1.2.4.3.1.1 | RowcRSEntry | not-accessible | current | Entry of cRSTable |
| 1.3.6.1.4.1.42229.1.2.4.3.1.1.1 | ColumncRSSrcTp | read-only | current | Source tp of cross connection. |
| 1.3.6.1.4.1.42229.1.2.4.3.1.1.2 | ColumncRSDstTp | read-only | current | Destination tp of cross connection. |
| 1.3.6.1.4.1.42229.1.2.4.3.1.1.3 | ColumncRSServiceLabel | read-only | current | Path/service name of cross-connection. |
| 1.3.6.1.4.1.42229.1.2.4.3.1.1.4 | ColumncRSManagedBy | read-only | current | Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :us… |
| 1.3.6.1.4.1.42229.1.2.4.3.1.1.5 | ColumncRSAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.4 | NodefiberConnection | |||
| 1.3.6.1.4.1.42229.1.2.4.4.1 | TablefiberConnectionTable | not-accessible | current | Fiber connection table which will be user managed and be explicitly provisioned by user. Fiber Connection indicates the physical fiber connection between physi… |
| 1.3.6.1.4.1.42229.1.2.4.4.1.1 | RowfiberConnectionEntry | not-accessible | current | Entry of fiberConnectionTable |
| 1.3.6.1.4.1.42229.1.2.4.4.1.1.1 | ColumnfiberConnectionSrcPort | read-only | current | Source port of fiber connection. |
| 1.3.6.1.4.1.42229.1.2.4.4.1.1.2 | ColumnfiberConnectionDstPort | read-only | current | Destination port of fiber connection. |
| 1.3.6.1.4.1.42229.1.2.4.4.1.1.3 | ColumnfiberConnectionType | read-only | current | Indicates fiber connection type. default value :two-way |
| 1.3.6.1.4.1.42229.1.2.4.4.1.1.4 | ColumnfiberConnectionFiberLabel | read-only | current | Label of fiber connection. |
| 1.3.6.1.4.1.42229.1.2.4.4.1.1.5 | ColumnfiberConnectionAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.5 | Nodeoptical | |||
| 1.3.6.1.4.1.42229.1.2.4.5.2 | Nodeots | |||
| 1.3.6.1.4.1.42229.1.2.4.5.2.1 | TableotsTable | not-accessible | current | Represents the Optical Transmission Section (OTS) interface entity |
| 1.3.6.1.4.1.42229.1.2.4.5.2.1.1 | RowotsEntry | not-accessible | current | Entry of otsTable |
| 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.1 | ColumnotsName | read-only | current | The name is defined to uniquely identify the ots optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.2 | ColumnotsAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.3 | ColumnotsOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.4 | ColumnotsAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.5 | ColumnotsAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.6 | ColumnotsSupportingRxPort | read-only | current | Supporting Rx port for the optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.7 | ColumnotsSupportingTxPort | read-only | current | Supporting Tx port for the optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.2.1.1.8 | ColumnotsMeasuredSpanLoss | read-only | current | The measured span loss excluding offset. |
| 1.3.6.1.4.1.42229.1.2.4.5.3 | Nodeoms | |||
| 1.3.6.1.4.1.42229.1.2.4.5.3.1 | TableomsTable | not-accessible | current | Represents the optical multiplex section (OMS) interface MO |
| 1.3.6.1.4.1.42229.1.2.4.5.3.1.1 | RowomsEntry | not-accessible | current | Entry of omsTable |
| 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.1 | ColumnomsName | read-only | current | The name is defined to uniquely identify the oms optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.2 | ColumnomsAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.3 | ColumnomsOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.4 | ColumnomsAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.5 | ColumnomsAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.6 | ColumnomsSupportingRxPort | read-only | current | Supporting Rx port for the optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.7 | ColumnomsSupportingTxPort | read-only | current | Supporting Tx port for the optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.8 | ColumnomsParentOtsInterface | read-only | current | Supporting OTS interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.9 | ColumnomsRxOpticalPower | read-only | current | Received optical power |
| 1.3.6.1.4.1.42229.1.2.4.5.3.1.1.10 | ColumnomsTxOpticalPower | read-only | current | Transmitted optical power |
| 1.3.6.1.4.1.42229.1.2.4.5.4 | Nodeosc | |||
| 1.3.6.1.4.1.42229.1.2.4.5.4.1 | TableoscTable | not-accessible | current | Represents the Optical Supervision Channel (OSC) MO |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1 | RowoscEntry | not-accessible | current | Entry of oscTable |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.1 | ColumnoscName | read-only | current | The name is defined to uniquely identify the osc optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.2 | ColumnoscAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.3 | ColumnoscOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.4 | ColumnoscAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.5 | ColumnoscAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.6 | ColumnoscSupportingRxPort | read-only | current | Supporting Rx port for the optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.7 | ColumnoscSupportingTxPort | read-only | current | Supporting Tx port for the optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.8 | ColumnoscParentOtsInterface | read-only | current | Supporting OTS insterface. |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.9 | ColumnoscMode | read-only | current | Indicating the current OSC mode. default value :155M52 |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.10 | ColumnoscWavelength | read-only | current | Indicates the wavelength band of the OSC channel. UNITS:nm default value :1510 |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.11 | ColumnoscDataCommunication | read-only | current | Configuration for enable or disable data communication network support of the OSC. default value :enabled |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.12 | ColumnoscRxOpticalPower | read-only | current | Received optical power |
| 1.3.6.1.4.1.42229.1.2.4.5.4.1.1.13 | ColumnoscTxOpticalPower | read-only | current | Transmitted optical power |
| 1.3.6.1.4.1.42229.1.2.4.5.5 | Nodegopt | |||
| 1.3.6.1.4.1.42229.1.2.4.5.5.1 | TablegoptTable | not-accessible | current | Represents the Generic Optical Section Interface (GOPT) MO |
| 1.3.6.1.4.1.42229.1.2.4.5.5.1.1 | RowgoptEntry | not-accessible | current | Entry of goptTable |
| 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.1 | ColumngoptName | read-only | current | The name is defined to uniquely identify the gopt optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.2 | ColumngoptAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.3 | ColumngoptOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.4 | ColumngoptAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.5 | ColumngoptAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.6 | ColumngoptSupportingRxPort | read-only | current | Supporting Rx port for the optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.7 | ColumngoptSupportingTxPort | read-only | current | Supporting Tx port for the optical interface. |
| 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.8 | ColumngoptRxOpticalPower | read-only | current | Received optical power |
| 1.3.6.1.4.1.42229.1.2.4.5.5.1.1.9 | ColumngoptTxOpticalPower | read-only | current | Transmitted optical power |
| 1.3.6.1.4.1.42229.1.2.4.5.9 | NodeomsStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.5.9.1 | TableomsStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.5.9.1.1 | RowomsStatisticsEntry | not-accessible | current | Entry of omsStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.5.9.1.1.1 | ColumnomsStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.5.10 | NodeoscStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.5.10.1 | TableoscStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.5.10.1.1 | RowoscStatisticsEntry | not-accessible | current | Entry of oscStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.5.10.1.1.1 | ColumnoscStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.5.11 | NodegoptStatistics | |||
| 1.3.6.1.4.1.42229.1.2.4.5.11.1 | TablegoptStatisticsTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.4.5.11.1.1 | RowgoptStatisticsEntry | not-accessible | current | Entry of goptStatisticsTable |
| 1.3.6.1.4.1.42229.1.2.4.5.11.1.1.1 | ColumngoptStatisticsEntryProtectionSwitchDuration | read-only | current | Protection Switch Duration UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.5.11.1.1.2 | ColumngoptStatisticsEntryProtectionSwitchCount | read-only | current | Protection Switch Count UNITS:times |
| 1.3.6.1.4.1.42229.1.2.4.5.11.1.1.3 | ColumngoptStatisticsEntryLossTx | read-only | current | Loss of Signal Seconds of Transmit side UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.5.11.1.1.4 | ColumngoptStatisticsEntryLossRx | read-only | current | Loss of Signal Seconds of Receive side UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.4.5.11.1.1.5 | ColumngoptStatisticsEntryLastClear | read-only | current | The start time of statistics monitor default value :0000-00-00T00:00:00.000Z |
| 1.3.6.1.4.1.42229.1.2.4.6 | Nodelldp | |||
| 1.3.6.1.4.1.42229.1.2.4.6.1 | ScalarlldpStatusNe | read-only | current | Global lldp control on NE level. Value of 'enabled', then the LLDP agent will receive, but it will not transmit LLDP frames on all ports with port level lldp n… |
| 1.3.6.1.4.1.42229.1.2.5 | Nodeperformance | |||
| 1.3.6.1.4.1.42229.1.2.5.1 | NodeperformanceInfo | |||
| 1.3.6.1.4.1.42229.1.2.5.1.1 | ScalarperformancePmdaystart | read-only | current | Specifies the hour of starting collecting 1-DAY monitoring parameters. To reset the NE clock to the default value of 00:00 hours, the parameter should contain … |
| 1.3.6.1.4.1.42229.1.2.5.1.2 | ScalarperformanceStatisticsEnable | read-only | current | The global switch for all system statistics data collection. default value :enabled |
| 1.3.6.1.4.1.42229.1.2.5.2 | NodepmPoint | |||
| 1.3.6.1.4.1.42229.1.2.5.2.1 | TablepmPointTable | not-accessible | current | The list of performance monitoring points associated with the monitored management object. |
| 1.3.6.1.4.1.42229.1.2.5.2.1.1 | RowpmPointEntry | not-accessible | current | Entry of pmPointTable |
| 1.3.6.1.4.1.42229.1.2.5.2.1.1.1 | ColumnpmPointPmEntity | read-only | current | Specifies the management object instance the performance monitoring data are collected for. |
| 1.3.6.1.4.1.42229.1.2.5.2.1.1.2 | ColumnpmPointPmpType | read-only | current | Specifies the type of performance monitoring point. |
| 1.3.6.1.4.1.42229.1.2.5.2.1.1.3 | ColumnpmPointPmTimePeriod | read-only | current | Specifies the time-period increments during which PM data are collected. |
| 1.3.6.1.4.1.42229.1.2.5.2.1.1.4 | ColumnpmPointSupervisionSwitch | read-only | current | Enable/disable counting for all performance monitoring parameters of the given PMP. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.5.2.1.1.5 | ColumnpmPointThresholdingSwitch | read-only | current | Enable/disable the TCA processing and reporting for all performance monitoring parameters of the given PM point. default value :enabled |
| 1.3.6.1.4.1.42229.1.2.5.2.1.1.6 | ColumnpmPointHistoryRecording | read-only | current | Enable/disable the history data storage for all performance monitoring parameters of the given PM point. default value :enabled |
| 1.3.6.1.4.1.42229.1.2.5.3 | NodepmData | |||
| 1.3.6.1.4.1.42229.1.2.5.3.2 | TablepmDataCurrentTable | not-accessible | current | Defines the get-pm output of record performance data for current time |
| 1.3.6.1.4.1.42229.1.2.5.3.2.1 | RowpmDataCurrentEntry | not-accessible | current | Entry of pmDataCurrentTable |
| 1.3.6.1.4.1.42229.1.2.5.3.2.1.1 | ColumnpmDataCurrentMonitoringDateTime | read-only | current | Monitoring data and time' |
| 1.3.6.1.4.1.42229.1.2.5.3.2.1.2 | ColumnpmDataCurrentPmParameter | not-accessible | current | Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values. |
| 1.3.6.1.4.1.42229.1.2.5.3.2.1.3 | ColumnpmDataCurrentPmValue | read-only | current | PM counter or gauge value of the PM parameter. |
| 1.3.6.1.4.1.42229.1.2.5.3.2.1.4 | ColumnpmDataCurrentPmUnit | read-only | current | Unit of PM value. |
| 1.3.6.1.4.1.42229.1.2.5.3.2.1.5 | ColumnpmDataCurrentValidity | read-only | current | Indicates whether or not a performance monitoring value is valid. |
| 1.3.6.1.4.1.42229.1.2.5.3.3 | TablepmDataLatestHistoryTable | not-accessible | current | Defines the get-pm output of record performance data for latest history time |
| 1.3.6.1.4.1.42229.1.2.5.3.3.1 | RowpmDataLatestHistoryEntry | not-accessible | current | Entry of pmDataLatestHistoryTable |
| 1.3.6.1.4.1.42229.1.2.5.3.3.1.1 | ColumnpmDataLatestHistoryMonitoringDateTime | read-only | current | Monitoring data and time' |
| 1.3.6.1.4.1.42229.1.2.5.3.3.1.2 | ColumnpmDataLatestHistoryPmParameter | not-accessible | current | Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values. |
| 1.3.6.1.4.1.42229.1.2.5.3.3.1.3 | ColumnpmDataLatestHistoryPmValue | read-only | current | PM counter or gauge value of the PM parameter. |
| 1.3.6.1.4.1.42229.1.2.5.3.3.1.4 | ColumnpmDataLatestHistoryPmUnit | read-only | current | Unit of PM value. |
| 1.3.6.1.4.1.42229.1.2.5.3.3.1.5 | ColumnpmDataLatestHistoryValidity | read-only | current | Indicates whether or not a performance monitoring value is valid. |
| 1.3.6.1.4.1.42229.1.2.5.3.4 | TablepmDataHistoryTable | not-accessible | current | Defines the get-pm output of record performance data for history |
| 1.3.6.1.4.1.42229.1.2.5.3.4.1 | RowpmDataHistoryEntry | not-accessible | current | Entry of pmDataHistoryTable |
| 1.3.6.1.4.1.42229.1.2.5.3.4.1.1 | ColumnpmDataHistoryRecordIndex | not-accessible | current | Index of PM data records. |
| 1.3.6.1.4.1.42229.1.2.5.3.4.1.2 | ColumnpmDataHistoryMonitoringDateTime | read-only | current | Monitoring data and time' |
| 1.3.6.1.4.1.42229.1.2.5.3.4.1.3 | ColumnpmDataHistoryPmParameter | not-accessible | current | Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values. |
| 1.3.6.1.4.1.42229.1.2.5.3.4.1.4 | ColumnpmDataHistoryPmValue | read-only | current | PM counter or gauge value of the PM parameter. |
| 1.3.6.1.4.1.42229.1.2.5.3.4.1.5 | ColumnpmDataHistoryPmUnit | read-only | current | Unit of PM value. |
| 1.3.6.1.4.1.42229.1.2.5.3.4.1.6 | ColumnpmDataHistoryValidity | read-only | current | Indicates whether or not a performance monitoring value is valid. |
| 1.3.6.1.4.1.42229.1.2.5.4 | NodepmThresholdsValue | |||
| 1.3.6.1.4.1.42229.1.2.5.4.1 | TablepmThresholdsValueTable | not-accessible | current | The list of entries of performance monitoring threshold value. |
| 1.3.6.1.4.1.42229.1.2.5.4.1.1 | RowpmThresholdsValueEntry | not-accessible | current | Entry of pmThresholdsValueTable |
| 1.3.6.1.4.1.42229.1.2.5.4.1.1.1 | ColumnpmThresholdsValuePmParameter | read-only | current | Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values. |
| 1.3.6.1.4.1.42229.1.2.5.4.1.1.2 | ColumnpmThresholdsValuePmHighThreshold | read-only | current | Specifies the desired high threshold value of the selected performance monitoring parameter. |
| 1.3.6.1.4.1.42229.1.2.5.4.1.1.3 | ColumnpmThresholdsValuePmLowThreshold | read-only | current | Specifies the desired low threshold value of the selected performance monitoring parameter. |
| 1.3.6.1.4.1.42229.1.2.5.4.1.1.4 | ColumnpmThresholdsValuePmUnit | read-only | current | The unit of the performance monitoring value. |
| 1.3.6.1.4.1.42229.1.2.6 | Nodenetworking | |||
| 1.3.6.1.4.1.42229.1.2.6.1 | NodenetworkingInfo | |||
| 1.3.6.1.4.1.42229.1.2.6.1.1 | ScalarnetworkingSourceAddressSelectMode | read-only | current | Select the source address for route next-hop entry. loopback-prefer mode select the numerically lowest address configured on loopback interfaces if exist, link… |
| 1.3.6.1.4.1.42229.1.2.6.2 | Nodeinterface | |||
| 1.3.6.1.4.1.42229.1.2.6.2.1 | TableinterfaceTable | not-accessible | current | The list of configured interfaces on the device. |
| 1.3.6.1.4.1.42229.1.2.6.2.1.1 | RowinterfaceEntry | not-accessible | current | Entry of interfaceTable |
| 1.3.6.1.4.1.42229.1.2.6.2.1.1.1 | ColumninterfaceIfName | read-only | current | The name of the interface. |
| 1.3.6.1.4.1.42229.1.2.6.2.1.1.2 | ColumninterfaceIfDescription | read-only | current | A textual description of the interface. |
| 1.3.6.1.4.1.42229.1.2.6.2.1.1.3 | ColumninterfaceIfType | read-only | current | The type of the interface. Refer to http://www.iana.org/assignments/smi-numbers |
| 1.3.6.1.4.1.42229.1.2.6.2.1.1.4 | ColumninterfaceAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.6.2.1.1.5 | ColumninterfaceOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.6.2.1.1.6 | ColumninterfaceAvailStatus | read-only | current | Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with … |
| 1.3.6.1.4.1.42229.1.2.6.2.1.1.7 | ColumninterfaceAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.6.3 | Nodeethernet | |||
| 1.3.6.1.4.1.42229.1.2.6.3.1 | TableethernetTable | not-accessible | current | The Ethernet attributes of an Ethernet interface. |
| 1.3.6.1.4.1.42229.1.2.6.3.1.1 | RowethernetEntry | not-accessible | current | Entry of ethernetTable |
| 1.3.6.1.4.1.42229.1.2.6.3.1.1.1 | ColumnethernetAutoNegotiation | read-only | current | Auto negotiation mode. default value :disabled |
| 1.3.6.1.4.1.42229.1.2.6.3.1.1.2 | ColumnethernetDuplexMode | read-only | current | Duplex Mode; only valid if auto negotiation is disabled. default value :full |
| 1.3.6.1.4.1.42229.1.2.6.3.1.1.3 | ColumnethernetOperationalDuplexMode | read-only | current | Operational duplex mode. default value :NA |
| 1.3.6.1.4.1.42229.1.2.6.3.1.1.4 | ColumnethernetRate | read-only | current | Required Ethernet Rate; only valid if auto negotiation is disabled. default value :max-rate |
| 1.3.6.1.4.1.42229.1.2.6.3.1.1.5 | ColumnethernetOperationalEthernetRate | read-only | current | Operation ethernet rate. default value :NA |
| 1.3.6.1.4.1.42229.1.2.6.3.1.1.6 | ColumnethernetFlowControl | read-only | current | Specifies the type of flow control to be supported. default value :tx-rx |
| 1.3.6.1.4.1.42229.1.2.6.3.1.1.7 | ColumnethernetOperationalFlowControl | read-only | current | Operational flow control. default value :NA |
| 1.3.6.1.4.1.42229.1.2.6.3.1.1.8 | ColumnethernetMacAddress | read-only | current | MAC Address of the port. default value :00:00:00:00:00:00 |
| 1.3.6.1.4.1.42229.1.2.6.3.1.1.9 | ColumnethernetAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.6.4 | Nodeppp | |||
| 1.3.6.1.4.1.42229.1.2.6.4.1 | TablepppTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.6.4.1.1 | RowpppEntry | not-accessible | current | Entry of pppTable |
| 1.3.6.1.4.1.42229.1.2.6.4.1.1.1 | ColumnpppType | read-only | current | Specifies the link type associated with the ppp. |
| 1.3.6.1.4.1.42229.1.2.6.4.1.1.2 | ColumnpppPfRef | read-only | current | Reference of the ppp profile. |
| 1.3.6.1.4.1.42229.1.2.6.4.1.1.3 | ColumnpppResourceRef | read-only | current | Reference of the lower layer resource associated with this interface. |
| 1.3.6.1.4.1.42229.1.2.6.4.1.1.4 | ColumnpppAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.6.5 | Nodeipv4 | |||
| 1.3.6.1.4.1.42229.1.2.6.5.1 | Tableipv4Table | not-accessible | current | Parameters for the IPv4 address family. |
| 1.3.6.1.4.1.42229.1.2.6.5.1.1 | Rowipv4Entry | not-accessible | current | Entry of ipv4Table |
| 1.3.6.1.4.1.42229.1.2.6.5.1.1.1 | Columnipv4Forwarding | read-only | current | Controls IPv4 packet forwarding of datagrams received by, but not addressed to, this interface. IPv4 routers forward datagrams. IPv4 hosts do not (except those… |
| 1.3.6.1.4.1.42229.1.2.6.5.1.1.2 | Columnipv4Mtu | read-only | current | The size, in octets, of the largest IPv4 packet that the interface will send and receive. The server may restrict the allowed values for this leaf, depending o… |
| 1.3.6.1.4.1.42229.1.2.6.5.1.1.3 | Columnipv4AddressAssignmentMethod | read-only | current | IPv4 address assignment method. default value :static |
| 1.3.6.1.4.1.42229.1.2.6.6 | NodeipAddress | |||
| 1.3.6.1.4.1.42229.1.2.6.6.1 | TableipAddressTable | not-accessible | current | The IPv4 address on the interface. |
| 1.3.6.1.4.1.42229.1.2.6.6.1.1 | RowipAddressEntry | not-accessible | current | Entry of ipAddressTable |
| 1.3.6.1.4.1.42229.1.2.6.6.1.1.1 | ColumnipAddressIp | read-only | current | The IPv4 address on the interface. |
| 1.3.6.1.4.1.42229.1.2.6.6.1.1.2 | ColumnipAddressOrigin | read-only | current | The origin of this address. default value :static |
| 1.3.6.1.4.1.42229.1.2.6.6.1.1.3 | ColumnipAddressPrefixLength | read-only | current | The length of the subnet prefix. |
| 1.3.6.1.4.1.42229.1.2.6.7 | NodeipUnnumbered | |||
| 1.3.6.1.4.1.42229.1.2.6.7.1 | TableipUnnumberedTable | not-accessible | current | The IP unnumbered configurations. |
| 1.3.6.1.4.1.42229.1.2.6.7.1.1 | RowipUnnumberedEntry | not-accessible | current | Entry of ipUnnumberedTable |
| 1.3.6.1.4.1.42229.1.2.6.7.1.1.1 | ColumnipUnnumberedUnnumEnabled | read-only | current | Indicates that the interface is unnumbered. By default the interface is numbered, i.e., expected to have an IP address configuration. default value :false |
| 1.3.6.1.4.1.42229.1.2.6.7.1.1.2 | ColumnipUnnumberedParentInterface | read-only | current | Reference of the parent interface of the unnumbered interface. |
| 1.3.6.1.4.1.42229.1.2.6.9 | NoderoutingProtocol | |||
| 1.3.6.1.4.1.42229.1.2.6.9.1 | TableroutingProtocolTable | not-accessible | current | Routing protocol instance. |
| 1.3.6.1.4.1.42229.1.2.6.9.1.1 | RowroutingProtocolEntry | not-accessible | current | Entry of routingProtocolTable |
| 1.3.6.1.4.1.42229.1.2.6.9.1.1.1 | ColumnroutingProtocolRtpType | read-only | current | The type of the routing protocol instance. |
| 1.3.6.1.4.1.42229.1.2.6.9.1.1.2 | ColumnroutingProtocolRtpName | read-only | current | The name of the routing protocol instance. For system-controlled instances this name is persistent, i.e., it SHOULD NOT change across reboots. |
| 1.3.6.1.4.1.42229.1.2.6.9.1.1.3 | ColumnroutingProtocolDescription | read-only | current | Textual description of the routing protocol instance. |
| 1.3.6.1.4.1.42229.1.2.6.10 | NodestaticRoute | |||
| 1.3.6.1.4.1.42229.1.2.6.10.1 | TablestaticRouteTable | not-accessible | current | A list of static routes. |
| 1.3.6.1.4.1.42229.1.2.6.10.1.1 | RowstaticRouteEntry | not-accessible | current | Entry of staticRouteTable |
| 1.3.6.1.4.1.42229.1.2.6.10.1.1.1 | ColumnstaticRouteDestinationPrefix | read-only | current | IPv4 destination prefix. |
| 1.3.6.1.4.1.42229.1.2.6.10.1.1.2 | ColumnstaticRouteDescription | read-only | current | Textual description of the static route. |
| 1.3.6.1.4.1.42229.1.2.6.10.1.1.3 | ColumnstaticRouteAdvertised | read-only | current | When set to YES, the static route is advertised in the routing protocol. For OSPF, the static route will be advertised as an AS external route, if OSPF is conf… |
| 1.3.6.1.4.1.42229.1.2.6.11 | NodenextHop | |||
| 1.3.6.1.4.1.42229.1.2.6.11.1 | TablenextHopTable | not-accessible | current | Configuration of static next-hop. |
| 1.3.6.1.4.1.42229.1.2.6.11.1.1 | RownextHopEntry | not-accessible | current | Entry of nextHopTable |
| 1.3.6.1.4.1.42229.1.2.6.11.1.1.1 | ColumnnextHopIndex | read-only | current | An user-specified identifier utilised to uniquely reference the next-hop entry in the next-hop list. The value of this index has no semantic meaning other than… |
| 1.3.6.1.4.1.42229.1.2.6.11.1.1.2 | ColumnnextHopOutgoingInterface | read-only | current | Reference of the outgoing interface. |
| 1.3.6.1.4.1.42229.1.2.6.11.1.1.3 | ColumnnextHopAddress | read-only | current | IPv4 address of the next-hop. |
| 1.3.6.1.4.1.42229.1.2.6.11.1.1.4 | ColumnnextHopMetric | read-only | current | metric of the next-hop. default value :0 |
| 1.3.6.1.4.1.42229.1.2.6.12 | Nodeospf | |||
| 1.3.6.1.4.1.42229.1.2.6.12.1 | TableospfTable | not-accessible | current | OSPF protocol. |
| 1.3.6.1.4.1.42229.1.2.6.12.1.1 | RowospfEntry | not-accessible | current | Entry of ospfTable |
| 1.3.6.1.4.1.42229.1.2.6.12.1.1.1 | ColumnospfRouterId | read-only | current | OSPF Router ID. |
| 1.3.6.1.4.1.42229.1.2.6.12.1.1.2 | ColumnospfDescription | read-only | current | Textual description of the OSPF instance. |
| 1.3.6.1.4.1.42229.1.2.6.12.1.1.3 | ColumnospfAsbr | read-only | current | OSPF Autonomous System Boundary Router. default value :true |
| 1.3.6.1.4.1.42229.1.2.6.12.1.1.4 | ColumnospfAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.6.12.1.1.5 | ColumnospfOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.6.12.1.1.6 | ColumnospfAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.6.13 | NodeospfArea | |||
| 1.3.6.1.4.1.42229.1.2.6.13.1 | TableospfAreaTable | not-accessible | current | Configuration of ospf area. |
| 1.3.6.1.4.1.42229.1.2.6.13.1.1 | RowospfAreaEntry | not-accessible | current | Entry of ospfAreaTable |
| 1.3.6.1.4.1.42229.1.2.6.13.1.1.1 | ColumnospfAreaId | read-only | current | OSPF Router Area ID. |
| 1.3.6.1.4.1.42229.1.2.6.13.1.1.2 | ColumnospfAreaAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.4.1.42229.1.2.6.13.1.1.3 | ColumnospfAreaOperStatus | read-only | current | The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot m… |
| 1.3.6.1.4.1.42229.1.2.6.13.1.1.4 | ColumnospfAreaAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.6.13.1.1.5 | ColumnospfAreaType | read-only | current | OSPF Router Area Type. default value :normal |
| 1.3.6.1.4.1.42229.1.2.6.14 | NodeospfInterface | |||
| 1.3.6.1.4.1.42229.1.2.6.14.1 | TableospfInterfaceTable | not-accessible | current | Configuration of interface in an ospf area. |
| 1.3.6.1.4.1.42229.1.2.6.14.1.1 | RowospfInterfaceEntry | not-accessible | current | Entry of ospfInterfaceTable |
| 1.3.6.1.4.1.42229.1.2.6.14.1.1.1 | ColumnospfInterfaceOspfIfName | read-only | current | Reference of the interface in OSPF area. |
| 1.3.6.1.4.1.42229.1.2.6.14.1.1.2 | ColumnospfInterfaceOspfLinkpf | read-only | current | Reference of the ospf link profile associated with the interface. |
| 1.3.6.1.4.1.42229.1.2.6.14.1.1.3 | ColumnospfInterfaceOspfCost | read-only | current | OSPF link cost. |
| 1.3.6.1.4.1.42229.1.2.6.14.1.1.4 | ColumnospfInterfaceOspfIfRouting | read-only | current | Specifies if Routing is enabled and if so, if Routing is passive or active. ACTIVE - This link is advertised and routing messages are transported over this lin… |
| 1.3.6.1.4.1.42229.1.2.6.14.1.1.5 | ColumnospfInterfaceOspfNetworkType | read-only | current | OSPF Interface Network Types. |
| 1.3.6.1.4.1.42229.1.2.6.15 | NodeospfAdjacency | |||
| 1.3.6.1.4.1.42229.1.2.6.15.1 | TableospfAdjacencyTable | not-accessible | current | attributes of OSPF adjacency. |
| 1.3.6.1.4.1.42229.1.2.6.15.1.1 | RowospfAdjacencyEntry | not-accessible | current | Entry of ospfAdjacencyTable |
| 1.3.6.1.4.1.42229.1.2.6.15.1.1.1 | ColumnospfAdjacencyOspfNeighborAddress | read-only | current | neighbor IP address of the OSPF adjacency. |
| 1.3.6.1.4.1.42229.1.2.6.15.1.1.2 | ColumnospfAdjacencyNeighborRouterId | read-only | current | OSPF neighbor Router ID. |
| 1.3.6.1.4.1.42229.1.2.6.15.1.1.3 | ColumnospfAdjacencyOspfAdjStatus | read-only | current | OSPF adjacency status. |
| 1.3.6.1.4.1.42229.1.2.6.16 | Noderib | |||
| 1.3.6.1.4.1.42229.1.2.6.16.1 | TableribTable | not-accessible | current | Each entry represents a RIB identified by the 'name' key. All routes in a RIB MUST belong to the same address family. For each routing instance, an implementat… |
| 1.3.6.1.4.1.42229.1.2.6.16.1.1 | RowribEntry | not-accessible | current | Entry of ribTable |
| 1.3.6.1.4.1.42229.1.2.6.16.1.1.1 | ColumnribName | read-only | current | The name of the RIB. |
| 1.3.6.1.4.1.42229.1.2.6.16.1.1.2 | ColumnribAddressFamily | read-only | current | Address family. |
| 1.3.6.1.4.1.42229.1.2.6.16.1.1.3 | ColumnribDefaultRib | read-only | current | This flag has the value of 'true' if and only if the RIB is the default RIB for the given address family. A default RIB always receives direct routes. By defau… |
| 1.3.6.1.4.1.42229.1.2.6.16.1.1.4 | ColumnribDescription | read-only | current | Textual description of the RIB. |
| 1.3.6.1.4.1.42229.1.2.6.17 | Noderoute | |||
| 1.3.6.1.4.1.42229.1.2.6.17.1 | TablerouteTable | not-accessible | current | A list of static routes. |
| 1.3.6.1.4.1.42229.1.2.6.17.1.1 | RowrouteEntry | not-accessible | current | Entry of routeTable |
| 1.3.6.1.4.1.42229.1.2.6.17.1.1.1 | ColumnrouteSourceProtocol | read-only | current | Type of the routing protocol from which the route originated. |
| 1.3.6.1.4.1.42229.1.2.6.17.1.1.2 | ColumnrouteDestinationPrefix | read-only | current | IPv4 destination prefix. |
| 1.3.6.1.4.1.42229.1.2.6.17.1.1.3 | ColumnrouteDescription | read-only | current | Textual description of the route. |
| 1.3.6.1.4.1.42229.1.2.6.17.1.1.4 | ColumnroutePreference | read-only | current | This route attribute, also known as administrative distance, allows for selecting the preferred route among routes with the same destination prefix. A smaller … |
| 1.3.6.1.4.1.42229.1.2.6.17.1.1.5 | ColumnrouteActive | read-only | current | Indicates that the route is preferred among all routes in the same RIB that have the same destination prefix. |
| 1.3.6.1.4.1.42229.1.2.6.18 | Nodeprofiles | |||
| 1.3.6.1.4.1.42229.1.2.6.18.1 | NodepppProfile | |||
| 1.3.6.1.4.1.42229.1.2.6.18.1.1 | TablepppProfileTable | not-accessible | current | Profile for the point-to-point interface. |
| 1.3.6.1.4.1.42229.1.2.6.18.1.1.1 | RowpppProfileEntry | not-accessible | current | Entry of pppProfileTable |
| 1.3.6.1.4.1.42229.1.2.6.18.1.1.1.1 | ColumnpppProfilePppPfName | read-only | current | The name of the point-to-point protocol profile. |
| 1.3.6.1.4.1.42229.1.2.6.18.1.1.1.2 | ColumnpppProfilePppFcsLength | read-only | current | Specifies whether the frame check sequence is a 16-bit or 32-bit value. default value :16 |
| 1.3.6.1.4.1.42229.1.2.6.18.1.1.1.3 | ColumnpppProfilePppMru | read-only | current | Specifies the maximum number of octets in the Information and Padding fields. UNITS:octets default value :1500 |
| 1.3.6.1.4.1.42229.1.2.6.18.1.1.1.4 | ColumnpppProfilePppRestartTimer | read-only | current | Specifies the restart timer of the PPP protocol in seconds. UNITS:seconds default value :3 |
| 1.3.6.1.4.1.42229.1.2.6.18.1.1.1.5 | ColumnpppProfilePppMaxFailure | read-only | current | Specifies the maximum failure value of the PPP protocol profile. default value :5 |
| 1.3.6.1.4.1.42229.1.2.6.18.2 | NodeospfLinkProfile | |||
| 1.3.6.1.4.1.42229.1.2.6.18.2.1 | TableospfLinkProfileTable | not-accessible | current | Profile for the OSPF protocol link. |
| 1.3.6.1.4.1.42229.1.2.6.18.2.1.1 | RowospfLinkProfileEntry | not-accessible | current | Entry of ospfLinkProfileTable |
| 1.3.6.1.4.1.42229.1.2.6.18.2.1.1.1 | ColumnospfLinkProfileOspfLinkpfName | read-only | current | The name of the OSPF protocol link profile. |
| 1.3.6.1.4.1.42229.1.2.6.18.2.1.1.2 | ColumnospfLinkProfileHelloInterval | read-only | current | Specifies the Hello Interval in seconds. UNITS:seconds default value :10 |
| 1.3.6.1.4.1.42229.1.2.6.18.2.1.1.3 | ColumnospfLinkProfileRouterDeadInterval | read-only | current | Specifies the Router Dead Interval in seconds. UNITS:seconds default value :40 |
| 1.3.6.1.4.1.42229.1.2.6.18.2.1.1.4 | ColumnospfLinkProfileRetransmissionInterval | read-only | current | Specifies the Retransmission Interval in seconds. UNITS:seconds default value :5 |
| 1.3.6.1.4.1.42229.1.2.6.19 | Nodeoscx | |||
| 1.3.6.1.4.1.42229.1.2.6.19.1 | TableoscxTable | not-accessible | current | OSCX (Optical Supervisory Channel Extended) interface |
| 1.3.6.1.4.1.42229.1.2.6.19.1.1 | RowoscxEntry | not-accessible | current | Entry of oscxTable |
| 1.3.6.1.4.1.42229.1.2.6.19.1.1.1 | ColumnoscxChannel | read-only | current | Specifies the OSCX channel within the Optical Supervisory Channel. |
| 1.3.6.1.4.1.42229.1.2.6.19.1.1.2 | ColumnoscxResourceRef | read-only | current | Reference of the lower layer resource associated with this interface. |
| 1.3.6.1.4.1.42229.1.2.6.19.1.1.3 | ColumnoscxAliasName | read-only | current | User defined alias for this entity. Must be an alphanumeric string with dash or underscore |
| 1.3.6.1.4.1.42229.1.2.8 | Nodenbi | |||
| 1.3.6.1.4.1.42229.1.2.8.1 | Nodesnmp | |||
| 1.3.6.1.4.1.42229.1.2.8.1.1 | Nodesnmpv3 | |||
| 1.3.6.1.4.1.42229.1.2.8.1.1.1 | Tablesnmpv3Table | not-accessible | current | SNMPv3 configuration for user |
| 1.3.6.1.4.1.42229.1.2.8.1.1.1.1 | Rowsnmpv3Entry | not-accessible | current | Entry of snmpv3Table |
| 1.3.6.1.4.1.42229.1.2.8.1.1.1.1.1 | Columnsnmpv3UserSecLevel | read-only | current | Specifies the SNMPv3 user security level. default value :no-auth-no-priv |
| 1.3.6.1.4.1.42229.1.2.8.1.1.1.1.2 | Columnsnmpv3AuthProtocol | read-only | current | Specifies the authentication protocol that the SNMPv3 user being created will use. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-n… |
| 1.3.6.1.4.1.42229.1.2.8.1.1.1.1.3 | Columnsnmpv3AuthPassphrase | read-only | current | Specifies the SNMPv3 authentication pass phrase. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv') |
| 1.3.6.1.4.1.42229.1.2.8.1.1.1.1.4 | Columnsnmpv3PrivProtocol | read-only | current | Specifies the privacy protocol that the SNMPv3 user being created will use. Conditions:../user-sec-level = 'auth-priv' default value :AES |
| 1.3.6.1.4.1.42229.1.2.8.1.1.1.1.5 | Columnsnmpv3PrivPassphrase | read-only | current | Specifies the SNMPv3 privacy pass phrase. Conditions:../user-sec-level = 'auth-priv' |
| 1.3.6.1.4.1.42229.1.2.8.1.2 | NodesnmpInfo | |||
| 1.3.6.1.4.1.42229.1.2.8.1.2.1 | ScalarsnmpEngineId | read-only | current | snmp EngineID of the NE. The EngineID will follow the EngineID format 3 defined in RFC3411. The MAC address in the Engine ID will be the first MAC address of t… |
| 1.3.6.1.4.1.42229.1.2.8.1.3 | NodesnmpCommunity | |||
| 1.3.6.1.4.1.42229.1.2.8.1.3.1 | TablesnmpCommunityTable | not-accessible | current | List of SNMP Community Strings. Please note that the trap-community-string is located in the snmp-target MO. |
| 1.3.6.1.4.1.42229.1.2.8.1.3.1.1 | RowsnmpCommunityEntry | not-accessible | current | Entry of snmpCommunityTable |
| 1.3.6.1.4.1.42229.1.2.8.1.3.1.1.1 | ColumnsnmpCommunityCommunityString | read-only | current | Community String. |
| 1.3.6.1.4.1.42229.1.2.8.1.3.1.1.2 | ColumnsnmpCommunityCommunityStringAccess | read-only | current | snmp access right of this community string. default value :read-only |
| 1.3.6.1.4.1.42229.1.2.8.1.4 | NodesnmpTarget | |||
| 1.3.6.1.4.1.42229.1.2.8.1.4.1 | TablesnmpTargetTable | not-accessible | current | List of SNMP targets (trap listeners) |
| 1.3.6.1.4.1.42229.1.2.8.1.4.1.1 | RowsnmpTargetEntry | not-accessible | current | Entry of snmpTargetTable |
| 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.1 | ColumnsnmpTargetSnmpVersion | read-only | current | snmp version. default value :v2c |
| 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.2 | ColumnsnmpTargetSnmpv3User | read-only | current | Indicate the snmpv3 user. Conditions:../snmp-version = 'v3' |
| 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.3 | ColumnsnmpTargetTargetName | read-only | current | Identifies the SNMP target |
| 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.4 | ColumnsnmpTargetTargetIp | read-only | current | IP address of the SNMP target |
| 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.5 | ColumnsnmpTargetTargetPort | read-only | current | UDP port number. default value :162 |
| 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.6 | ColumnsnmpTargetTargetTransport | read-only | current | Type of transport for the SNMP target default value :udp |
| 1.3.6.1.4.1.42229.1.2.8.1.4.1.1.7 | ColumnsnmpTargetTrapCommunityString | read-only | current | Community string used for SNMP traps Conditions:../snmp-version = 'v2c' default value :groove |
| 1.3.6.1.4.1.42229.1.2.8.2 | Nodecli | |||
| 1.3.6.1.4.1.42229.1.2.8.2.1 | NodecliConfig | |||
| 1.3.6.1.4.1.42229.1.2.8.2.1.1 | TablecliConfigTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.8.2.1.1.1 | RowcliConfigEntry | not-accessible | current | Entry of cliConfigTable |
| 1.3.6.1.4.1.42229.1.2.8.2.1.1.1.1 | ColumncliConfigCliLines | read-only | current | Number of rows to be used for display. This value is automatically discovered when possible default value :40 |
| 1.3.6.1.4.1.42229.1.2.8.2.1.1.1.2 | ColumncliConfigCliColumns | read-only | current | Number of columns to be used for display. This value is automatically discovered when possible default value :140 |
| 1.3.6.1.4.1.42229.1.2.8.2.1.1.1.3 | ColumncliConfigMaxHistorySize | read-only | current | Command history maximum size for the current session default value :500 |
| 1.3.6.1.4.1.42229.1.2.8.2.1.1.1.4 | ColumncliConfigInteractiveMode | read-only | current | This determines if the CLI shall issue interactive prompt (e.g. for prompting additional information, or for confirmation of user initiated actions). Enabled =… |
| 1.3.6.1.4.1.42229.1.2.8.3 | Noderestconf | |||
| 1.3.6.1.4.1.42229.1.2.8.3.1 | ScalarrestconfRestHttpSupport | read-only | current | Defines if the HTTP port (8080) is enabled for RESTCONF default value :disabled |
| 1.3.6.1.4.1.42229.1.2.8.3.2 | ScalarrestconfRestHttpsSupport | read-only | current | Defines if the HTTPS port (8181) is enabled for RESTCONF default value :enabled |
| 1.3.6.1.4.1.42229.1.2.8.3.3 | ScalarrestconfRestSessionTimeout | read-only | current | Timeout of a cookie based RESTCONF session. The cookie expiration date is reset every time there is activity on the session. UNITS:minutes default value :5 |
| 1.3.6.1.4.1.42229.1.2.8.4 | NodecliAlias | |||
| 1.3.6.1.4.1.42229.1.2.8.4.1 | TablecliAliasTable | not-accessible | current | List of aliases used in CLI. Can only be accessed via 'alias/unalias' CLI commands. |
| 1.3.6.1.4.1.42229.1.2.8.4.1.1 | RowcliAliasEntry | not-accessible | current | Entry of cliAliasTable |
| 1.3.6.1.4.1.42229.1.2.8.4.1.1.1 | ColumncliAliasName | read-only | current | Name of the alias |
| 1.3.6.1.4.1.42229.1.2.8.4.1.1.2 | ColumncliAliasValue | read-only | current | Value of the alias |
| 1.3.6.1.4.1.42229.1.2.8.5 | NodecliScript | |||
| 1.3.6.1.4.1.42229.1.2.8.5.1 | TablecliScriptTable | not-accessible | current | List of available CLI scripts. Scripts can be executed with the 'run' command |
| 1.3.6.1.4.1.42229.1.2.8.5.1.1 | RowcliScriptEntry | not-accessible | current | Entry of cliScriptTable |
| 1.3.6.1.4.1.42229.1.2.8.5.1.1.1 | ColumncliScriptScriptName | read-only | current | File name of the CLI script |
| 1.3.6.1.4.1.42229.1.2.8.5.1.1.2 | ColumncliScriptDescription | read-only | current | Description of the CLI script |
| 1.3.6.1.4.1.42229.1.2.9 | Nodefilesw | |||
| 1.3.6.1.4.1.42229.1.2.9.2 | Nodesoftwareload | |||
| 1.3.6.1.4.1.42229.1.2.9.2.1 | TablesoftwareloadTable | not-accessible | current | The list of the software loads in the system. |
| 1.3.6.1.4.1.42229.1.2.9.2.1.1 | RowsoftwareloadEntry | not-accessible | current | Entry of softwareloadTable |
| 1.3.6.1.4.1.42229.1.2.9.2.1.1.1 | ColumnsoftwareloadSwloadId | read-only | current | software load identifier which is uniquely identify specific software load. |
| 1.3.6.1.4.1.42229.1.2.9.2.1.1.2 | ColumnsoftwareloadSwloadState | read-only | current | Indicates the state of the software load. |
| 1.3.6.1.4.1.42229.1.2.9.2.1.1.3 | ColumnsoftwareloadSwloadVersion | read-only | current | Indicates the software version of the software load. |
| 1.3.6.1.4.1.42229.1.2.9.2.1.1.4 | ColumnsoftwareloadSwloadVendor | read-only | current | Vendor information of the software load. |
| 1.3.6.1.4.1.42229.1.2.9.2.1.1.5 | ColumnsoftwareloadSwloadProduct | read-only | current | Indicates the network element family this software belongs to. |
| 1.3.6.1.4.1.42229.1.2.9.2.1.1.6 | ColumnsoftwareloadSwloadLabel | read-only | current | The label of the software load including summary information. |
| 1.3.6.1.4.1.42229.1.2.9.3 | Nodedatabase | |||
| 1.3.6.1.4.1.42229.1.2.9.3.1 | TabledatabaseTable | not-accessible | current | The list of the databases in the system. |
| 1.3.6.1.4.1.42229.1.2.9.3.1.1 | RowdatabaseEntry | not-accessible | current | Entry of databaseTable |
| 1.3.6.1.4.1.42229.1.2.9.3.1.1.1 | ColumndatabaseId | read-only | current | database identifier which is uniquely identify specific database. |
| 1.3.6.1.4.1.42229.1.2.9.3.1.1.2 | ColumndatabaseState | read-only | current | Indicates the state of the database. |
| 1.3.6.1.4.1.42229.1.2.9.3.1.1.3 | ColumndatabaseVersion | read-only | current | Indicates the database version. |
| 1.3.6.1.4.1.42229.1.2.9.3.1.1.4 | ColumndatabaseVendor | read-only | current | Vendor information of the database. |
| 1.3.6.1.4.1.42229.1.2.9.3.1.1.5 | ColumndatabaseProduct | read-only | current | Indicates the network element family this database belongs to. |
| 1.3.6.1.4.1.42229.1.2.9.3.1.1.6 | ColumndatabaseBackupTime | read-only | current | Indicates the database last backup time. default value : |
| 1.3.6.1.4.1.42229.1.2.9.4 | NodefwVersionMap | |||
| 1.3.6.1.4.1.42229.1.2.9.4.1 | TablefwVersionMapTable | not-accessible | current | The firmware information of the upgradable devices included in the software load. |
| 1.3.6.1.4.1.42229.1.2.9.4.1.1 | RowfwVersionMapEntry | not-accessible | current | Entry of fwVersionMapTable |
| 1.3.6.1.4.1.42229.1.2.9.4.1.1.1 | ColumnfwVersionMapDeviceName | read-only | current | Indicates the name of the device. |
| 1.3.6.1.4.1.42229.1.2.9.4.1.1.2 | ColumnfwVersionMapDeviceFwVersion | read-only | current | Indicates the version of the firmware. |
| 1.3.6.1.4.1.42229.1.2.9.5 | NodecurrentFwVersion | |||
| 1.3.6.1.4.1.42229.1.2.9.5.1 | TablecurrentFwVersionTable | not-accessible | current | The firmware information of the upgradable devices included in the software load. |
| 1.3.6.1.4.1.42229.1.2.9.5.1.1 | RowcurrentFwVersionEntry | not-accessible | current | Entry of currentFwVersionTable |
| 1.3.6.1.4.1.42229.1.2.9.5.1.1.1 | ColumncurrentFwVersionEquipmentEntity | read-only | current | Indicates the entity of the equipment carrying the device. |
| 1.3.6.1.4.1.42229.1.2.9.5.1.1.2 | ColumncurrentFwVersionFwEquipmentType | read-only | current | Indicates the type of the equipment carrying the device. |
| 1.3.6.1.4.1.42229.1.2.9.5.1.1.3 | ColumncurrentFwVersionDeviceName | read-only | current | Indicates the name of the device. |
| 1.3.6.1.4.1.42229.1.2.9.5.1.1.4 | ColumncurrentFwVersionDeviceFwVersion | read-only | current | Indicates the version of the firmware. |
| 1.3.6.1.4.1.42229.1.2.9.5.1.1.5 | ColumncurrentFwVersionFwState | read-only | current | Indicates firmware state of the device. Current: indicates the loaded firmware is the version of current software load. Not-current: indicates the loaded firmw… |
| 1.3.6.1.4.1.42229.1.2.9.6 | NoderollbackPoint | |||
| 1.3.6.1.4.1.42229.1.2.9.6.1 | TablerollbackPointTable | not-accessible | current | Represents a rollback point stored in the system. A rollback point represents the system configuration of a specific point in time, that the user may create wi… |
| 1.3.6.1.4.1.42229.1.2.9.6.1.1 | RowrollbackPointEntry | not-accessible | current | Entry of rollbackPointTable |
| 1.3.6.1.4.1.42229.1.2.9.6.1.1.1 | ColumnrollbackPointId | read-only | current | Integer ID of the rollback-point. Generated dynamically whenever a rollback-point is created, with range 1 to 100 |
| 1.3.6.1.4.1.42229.1.2.9.6.1.1.2 | ColumnrollbackPointCreationTime | read-only | current | Timestamp when this rollback-point was created |
| 1.3.6.1.4.1.42229.1.2.9.6.1.1.3 | ColumnrollbackPointCreationTrigger | read-only | current | Describes the author user-name of this rollback-point |
| 1.3.6.1.4.1.42229.1.2.9.6.1.1.4 | ColumnrollbackPointDescription | read-only | current | User defined description of this rollback-point |
| 1.3.6.1.4.1.42229.1.2.9.6.1.1.5 | ColumnrollbackPointType | read-only | current | The type of the rollback-point default value :normal |
| 1.3.6.1.4.1.42229.1.2.9.8 | NodelogServer | |||
| 1.3.6.1.4.1.42229.1.2.9.8.1 | TablelogServerTable | not-accessible | current | Grouping the configuration parameters for log forwarding. |
| 1.3.6.1.4.1.42229.1.2.9.8.1.1 | RowlogServerEntry | not-accessible | current | Entry of logServerTable |
| 1.3.6.1.4.1.42229.1.2.9.8.1.1.1 | ColumnlogServerName | read-only | current | The name for the endpoint to forwarding logs to. |
| 1.3.6.1.4.1.42229.1.2.9.8.1.1.2 | ColumnlogServerIpAddress | read-only | current | The leaf uniquely specifies the ipv4 address of the remote host. |
| 1.3.6.1.4.1.42229.1.2.9.8.1.1.3 | ColumnlogServerTransport | read-only | current | It is the transport protocol used when forwarding logs. default value :udp |
| 1.3.6.1.4.1.42229.1.2.9.8.1.1.4 | ColumnlogServerPort | read-only | current | This leaf specifies the port number used to deliver messages to the remote server. default value :514 |
| 1.3.6.1.4.1.42229.1.2.9.8.1.1.5 | ColumnlogServerDestinationFacilityType | read-only | current | Switching of the function destination-facility default value :disabled |
| 1.3.6.1.4.1.42229.1.2.9.8.1.1.6 | ColumnlogServerDestinationFacility | read-only | current | This leaf specifies the facility used in messages delivered to the remote server. default value :23 |
| 1.3.6.1.4.1.42229.1.2.9.10 | NodelogFacility | |||
| 1.3.6.1.4.1.42229.1.2.9.10.1 | TablelogFacilityTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.9.10.1.1 | RowlogFacilityEntry | not-accessible | current | Entry of logFacilityTable |
| 1.3.6.1.4.1.42229.1.2.9.10.1.1.1 | ColumnlogFacilityLogSelectorFacility | read-only | current | The leaf uniquely identifies a syslog facility for forwarding. |
| 1.3.6.1.4.1.42229.1.2.9.10.1.1.2 | ColumnlogFacilityLogSelectorSeverity | read-only | current | The system log selected severity level for forwarding default value :debug |
| 1.3.6.1.4.1.42229.1.2.9.10.1.1.3 | ColumnlogFacilityCompareOp | read-only | current | This leaf describes the option to specify how the severity comparison is performed. default value :equals-or-higher |
| 1.3.6.1.4.1.42229.1.2.10 | NodetimeManager | |||
| 1.3.6.1.4.1.42229.1.2.10.1 | NodetimeManagerInfo | |||
| 1.3.6.1.4.1.42229.1.2.10.1.1 | ScalartimeManagerTimezone | read-only | current | Indicates the Name of the Time Zone of this NE. default value :Greenwich_Mean_Time:Dublin-Edinburgh-Lisbon-London[GMT] |
| 1.3.6.1.4.1.42229.1.2.10.1.2 | ScalartimeManagerCurrentTime | read-only | current | Indicates the current Date and Time of this NE. |
| 1.3.6.1.4.1.42229.1.2.10.1.3 | ScalartimeManagerLastStartTime | read-only | current | Indicate the time of last system boot. |
| 1.3.6.1.4.1.42229.1.2.10.1.4 | ScalartimeManagerUpTime | read-only | current | Indicate how long the system has been running. |
| 1.3.6.1.4.1.42229.1.2.10.1.5 | ScalartimeManagerTimeSourceState | read-only | current | Indicates the state of the time source. |
| 1.3.6.1.4.1.42229.1.2.10.2 | Nodentp | |||
| 1.3.6.1.4.1.42229.1.2.10.2.1 | ScalarntpEnabled | read-only | current | Indicates if NTP is enabled. default value :false |
| 1.3.6.1.4.1.42229.1.2.10.2.2 | ScalarntpCurrentTimeSource | read-only | current | Indicates the current time source. default value :0.0.0.0 |
| 1.3.6.1.4.1.42229.1.2.10.3 | NodentpAssociation | |||
| 1.3.6.1.4.1.42229.1.2.10.3.1 | TablentpAssociationTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.10.3.1.1 | RowntpAssociationEntry | not-accessible | current | Entry of ntpAssociationTable |
| 1.3.6.1.4.1.42229.1.2.10.3.1.1.1 | ColumnntpAssociationSource | read-only | current | Indicates the ntp-association-source. |
| 1.3.6.1.4.1.42229.1.2.10.3.1.1.2 | ColumnntpAssociationType | read-only | current | Indicates the ntp association type. |
| 1.3.6.1.4.1.42229.1.2.10.3.1.1.3 | ColumnntpAssociationPreferredNtpAssociation | read-only | current | Indicates if this is preferred. |
| 1.3.6.1.4.1.42229.1.2.10.3.1.1.4 | ColumnntpAssociationNtpAdminState | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. default value :up |
| 1.3.6.1.4.1.42229.1.2.10.4 | NodentpAssociationStatus | |||
| 1.3.6.1.4.1.42229.1.2.10.4.1 | TablentpAssociationStatusTable | not-accessible | current | NULL |
| 1.3.6.1.4.1.42229.1.2.10.4.1.1 | RowntpAssociationStatusEntry | not-accessible | current | Entry of ntpAssociationStatusTable |
| 1.3.6.1.4.1.42229.1.2.10.4.1.1.1 | ColumnntpAssociationStatusNtpAssociationRefid | read-only | current | Reference clock type or address for the peer. |
| 1.3.6.1.4.1.42229.1.2.10.4.1.1.2 | ColumnntpAssociationStatusNtpStratum | read-only | current | This attribute indicates the stratum of local clock. A value of 0, indicates that Stratum in Unspecified. |
| 1.3.6.1.4.1.42229.1.2.10.4.1.1.3 | ColumnntpAssociationStatusNtpPollingInterval | read-only | current | NTP polling interval. This is an integer number indicating the HOST polling interval between transmitted messages, in seconds. UNITS:seconds |
| 1.3.6.1.4.1.42229.1.2.10.4.1.1.4 | ColumnntpAssociationStatusNtpPrecision | read-only | current | This is an unsigned floating-point number indicating the precision of the various clocks, in milliseconds. UNITS:milliseconds |
| 1.3.6.1.4.1.42229.1.2.10.4.1.1.5 | ColumnntpAssociationStatusNtpAssociationOffset | read-only | current | Indicates the offset between the local clock and the superior reference clock. UNITS:milliseconds |
| 1.3.6.1.4.1.42229.1.2.10.4.1.1.6 | ColumnntpAssociationStatusNtpAssociationReach | read-only | current | Indicates the reachability of the configured server or peer. |
| 1.3.6.1.4.1.42229.1.2.10.4.1.1.7 | ColumnntpAssociationStatusNtpAssociationDelay | read-only | current | Indicates the delay between the local clock and the superior reference clock, in milliseconds. UNITS:milliseconds |
| 1.3.6.1.4.1.42229.1.2.10.4.1.1.8 | ColumnntpAssociationStatusNtpAssociationDispersion | read-only | current | Indicates the dispersion between the local clock and the peer clock, in milliseconds. UNITS:milliseconds |
| 1.3.6.1.4.1.42229.1.2.11 | Nodeztc | |||
| 1.3.6.1.4.1.42229.1.2.11.1 | NodeztcInfo | |||
| 1.3.6.1.4.1.42229.1.2.11.1.1 | ScalarztcEnabled | read-only | current | enable/disable Zero Touch commissioning. default value :true |
| 1.3.6.1.4.1.42229.1.2.11.1.2 | ScalarztcStatus | read-only | current | Shows the ZTC process status: disabled - ZTC will not be attempted because it was disabled via configuration ready - ZTC will be attempted when able to communi… |
| 1.3.6.1.4.1.42229.1.2.13 | Nodecommon | |||
| 1.3.6.1.4.1.42229.1.2.13.1 | NodebitErrorRatePreFec | |||
| 1.3.6.1.4.1.42229.1.2.13.1.1 | TablebitErrorRatePreFecTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for bit error rate before fec |
| 1.3.6.1.4.1.42229.1.2.13.1.1.1 | RowbitErrorRatePreFecEntry | not-accessible | current | Entry of bitErrorRatePreFecTable |
| 1.3.6.1.4.1.42229.1.2.13.1.1.1.1 | ColumnbitErrorRatePreFecInstant | read-only | current | the instant value of statistics counter UNITS:bit-ratio |
| 1.3.6.1.4.1.42229.1.2.13.1.1.1.2 | ColumnbitErrorRatePreFecAvg | read-only | current | the average value of statistics counter UNITS:bit-ratio |
| 1.3.6.1.4.1.42229.1.2.13.1.1.1.3 | ColumnbitErrorRatePreFecMin | read-only | current | the minimum value of statistics counter UNITS:bit-ratio |
| 1.3.6.1.4.1.42229.1.2.13.1.1.1.4 | ColumnbitErrorRatePreFecMax | read-only | current | the maximum value of statistics counter UNITS:bit-ratio |
| 1.3.6.1.4.1.42229.1.2.13.2 | NodebitErrorRatePostFec | |||
| 1.3.6.1.4.1.42229.1.2.13.2.1 | TablebitErrorRatePostFecTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for bit error rate post fec |
| 1.3.6.1.4.1.42229.1.2.13.2.1.1 | RowbitErrorRatePostFecEntry | not-accessible | current | Entry of bitErrorRatePostFecTable |
| 1.3.6.1.4.1.42229.1.2.13.2.1.1.1 | ColumnbitErrorRatePostFecInstant | read-only | current | the instant value of statistics counter UNITS:bit-ratio |
| 1.3.6.1.4.1.42229.1.2.13.2.1.1.2 | ColumnbitErrorRatePostFecAvg | read-only | current | the average value of statistics counter UNITS:bit-ratio |
| 1.3.6.1.4.1.42229.1.2.13.2.1.1.3 | ColumnbitErrorRatePostFecMin | read-only | current | the minimum value of statistics counter UNITS:bit-ratio |
| 1.3.6.1.4.1.42229.1.2.13.2.1.1.4 | ColumnbitErrorRatePostFecMax | read-only | current | the maximum value of statistics counter UNITS:bit-ratio |
| 1.3.6.1.4.1.42229.1.2.13.3 | NodeinUtilization | |||
| 1.3.6.1.4.1.42229.1.2.13.3.1 | TableinUtilizationTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for RX utilization |
| 1.3.6.1.4.1.42229.1.2.13.3.1.1 | RowinUtilizationEntry | not-accessible | current | Entry of inUtilizationTable |
| 1.3.6.1.4.1.42229.1.2.13.3.1.1.1 | ColumninUtilizationInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.3.1.1.2 | ColumninUtilizationAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.3.1.1.3 | ColumninUtilizationMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.3.1.1.4 | ColumninUtilizationMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.4 | NodeoutUtilization | |||
| 1.3.6.1.4.1.42229.1.2.13.4.1 | TableoutUtilizationTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for TX utilization |
| 1.3.6.1.4.1.42229.1.2.13.4.1.1 | RowoutUtilizationEntry | not-accessible | current | Entry of outUtilizationTable |
| 1.3.6.1.4.1.42229.1.2.13.4.1.1.1 | ColumnoutUtilizationInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.4.1.1.2 | ColumnoutUtilizationAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.4.1.1.3 | ColumnoutUtilizationMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.4.1.1.4 | ColumnoutUtilizationMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.23 | NodeoduDelay | |||
| 1.3.6.1.4.1.42229.1.2.13.23.1 | TableoduDelayTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for measured odu signal delay |
| 1.3.6.1.4.1.42229.1.2.13.23.1.1 | RowoduDelayEntry | not-accessible | current | Entry of oduDelayTable |
| 1.3.6.1.4.1.42229.1.2.13.23.1.1.1 | ColumnoduDelayInstant | read-only | current | the instant value of statistics counter UNITS:microseconds |
| 1.3.6.1.4.1.42229.1.2.13.23.1.1.2 | ColumnoduDelayAvg | read-only | current | the average value of statistics counter UNITS:microseconds |
| 1.3.6.1.4.1.42229.1.2.13.23.1.1.3 | ColumnoduDelayMin | read-only | current | the minimum value of statistics counter UNITS:microseconds |
| 1.3.6.1.4.1.42229.1.2.13.23.1.1.4 | ColumnoduDelayMax | read-only | current | the maximum value of statistics counter UNITS:microseconds |
| 1.3.6.1.4.1.42229.1.2.13.24 | NodeinOpticalPower | |||
| 1.3.6.1.4.1.42229.1.2.13.24.1 | TableinOpticalPowerTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for RX optical power |
| 1.3.6.1.4.1.42229.1.2.13.24.1.1 | RowinOpticalPowerEntry | not-accessible | current | Entry of inOpticalPowerTable |
| 1.3.6.1.4.1.42229.1.2.13.24.1.1.1 | ColumninOpticalPowerInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.24.1.1.2 | ColumninOpticalPowerAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.24.1.1.3 | ColumninOpticalPowerMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.24.1.1.4 | ColumninOpticalPowerMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.25 | NodeoutOpticalPower | |||
| 1.3.6.1.4.1.42229.1.2.13.25.1 | TableoutOpticalPowerTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for TX optical power |
| 1.3.6.1.4.1.42229.1.2.13.25.1.1 | RowoutOpticalPowerEntry | not-accessible | current | Entry of outOpticalPowerTable |
| 1.3.6.1.4.1.42229.1.2.13.25.1.1.1 | ColumnoutOpticalPowerInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.25.1.1.2 | ColumnoutOpticalPowerAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.25.1.1.3 | ColumnoutOpticalPowerMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.25.1.1.4 | ColumnoutOpticalPowerMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.26 | NodedifferentialGroupDelay | |||
| 1.3.6.1.4.1.42229.1.2.13.26.1 | TabledifferentialGroupDelayTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for differential group delay |
| 1.3.6.1.4.1.42229.1.2.13.26.1.1 | RowdifferentialGroupDelayEntry | not-accessible | current | Entry of differentialGroupDelayTable |
| 1.3.6.1.4.1.42229.1.2.13.26.1.1.1 | ColumndifferentialGroupDelayInstant | read-only | current | the instant value of statistics counter UNITS:ps |
| 1.3.6.1.4.1.42229.1.2.13.26.1.1.2 | ColumndifferentialGroupDelayAvg | read-only | current | the average value of statistics counter UNITS:ps |
| 1.3.6.1.4.1.42229.1.2.13.26.1.1.3 | ColumndifferentialGroupDelayMin | read-only | current | the minimum value of statistics counter UNITS:ps |
| 1.3.6.1.4.1.42229.1.2.13.26.1.1.4 | ColumndifferentialGroupDelayMax | read-only | current | the maximum value of statistics counter UNITS:ps |
| 1.3.6.1.4.1.42229.1.2.13.27 | NodechromaticDispersion | |||
| 1.3.6.1.4.1.42229.1.2.13.27.1 | TablechromaticDispersionTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for chromatic dispersion |
| 1.3.6.1.4.1.42229.1.2.13.27.1.1 | RowchromaticDispersionEntry | not-accessible | current | Entry of chromaticDispersionTable |
| 1.3.6.1.4.1.42229.1.2.13.27.1.1.1 | ColumnchromaticDispersionInstant | read-only | current | the instant value of statistics counter UNITS:ps/nm |
| 1.3.6.1.4.1.42229.1.2.13.27.1.1.2 | ColumnchromaticDispersionAvg | read-only | current | the average value of statistics counter UNITS:ps/pm |
| 1.3.6.1.4.1.42229.1.2.13.27.1.1.3 | ColumnchromaticDispersionMin | read-only | current | the minimum value of statistics counter UNITS:ps/pm |
| 1.3.6.1.4.1.42229.1.2.13.27.1.1.4 | ColumnchromaticDispersionMax | read-only | current | the maximum value of statistics counter UNITS:ps/pm |
| 1.3.6.1.4.1.42229.1.2.13.28 | Nodeosnr | |||
| 1.3.6.1.4.1.42229.1.2.13.28.1 | TableosnrTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for osnr |
| 1.3.6.1.4.1.42229.1.2.13.28.1.1 | RowosnrEntry | not-accessible | current | Entry of osnrTable |
| 1.3.6.1.4.1.42229.1.2.13.28.1.1.1 | ColumnosnrInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.28.1.1.2 | ColumnosnrAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.28.1.1.3 | ColumnosnrMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.28.1.1.4 | ColumnosnrMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.29 | NodeqFactor | |||
| 1.3.6.1.4.1.42229.1.2.13.29.1 | TableqFactorTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for q-factor |
| 1.3.6.1.4.1.42229.1.2.13.29.1.1 | RowqFactorEntry | not-accessible | current | Entry of qFactorTable |
| 1.3.6.1.4.1.42229.1.2.13.29.1.1.1 | ColumnqFactorInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.29.1.1.2 | ColumnqFactorAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.29.1.1.3 | ColumnqFactorMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.29.1.1.4 | ColumnqFactorMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.30 | NodepolarizationDependentLoss | |||
| 1.3.6.1.4.1.42229.1.2.13.30.1 | TablepolarizationDependentLossTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for polarization dependent loss |
| 1.3.6.1.4.1.42229.1.2.13.30.1.1 | RowpolarizationDependentLossEntry | not-accessible | current | Entry of polarizationDependentLossTable |
| 1.3.6.1.4.1.42229.1.2.13.30.1.1.1 | ColumnpolarizationDependentLossInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.30.1.1.2 | ColumnpolarizationDependentLossAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.30.1.1.3 | ColumnpolarizationDependentLossMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.30.1.1.4 | ColumnpolarizationDependentLossMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.31 | NodeinOpticalFrequency | |||
| 1.3.6.1.4.1.42229.1.2.13.31.1 | TableinOpticalFrequencyTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for RX optical frequency |
| 1.3.6.1.4.1.42229.1.2.13.31.1.1 | RowinOpticalFrequencyEntry | not-accessible | current | Entry of inOpticalFrequencyTable |
| 1.3.6.1.4.1.42229.1.2.13.31.1.1.1 | ColumninOpticalFrequencyInstant | read-only | current | the instant value of statistics counter UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.13.31.1.1.2 | ColumninOpticalFrequencyAvg | read-only | current | the average value of statistics counter UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.13.31.1.1.3 | ColumninOpticalFrequencyMin | read-only | current | the minimum value of statistics counter UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.13.31.1.1.4 | ColumninOpticalFrequencyMax | read-only | current | the maximum value of statistics counter UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.13.32 | NodeoutOpticalFrequency | |||
| 1.3.6.1.4.1.42229.1.2.13.32.1 | TableoutOpticalFrequencyTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for TX optical frequency |
| 1.3.6.1.4.1.42229.1.2.13.32.1.1 | RowoutOpticalFrequencyEntry | not-accessible | current | Entry of outOpticalFrequencyTable |
| 1.3.6.1.4.1.42229.1.2.13.32.1.1.1 | ColumnoutOpticalFrequencyInstant | read-only | current | the instant value of statistics counter UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.13.32.1.1.2 | ColumnoutOpticalFrequencyAvg | read-only | current | the average value of statistics counter UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.13.32.1.1.3 | ColumnoutOpticalFrequencyMin | read-only | current | the minimum value of statistics counter UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.13.32.1.1.4 | ColumnoutOpticalFrequencyMax | read-only | current | the maximum value of statistics counter UNITS:MHz |
| 1.3.6.1.4.1.42229.1.2.13.33 | NodeinOpticalPowerLaneHigh | |||
| 1.3.6.1.4.1.42229.1.2.13.33.1 | TableinOpticalPowerLaneHighTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for highest value of RX lane optical power |
| 1.3.6.1.4.1.42229.1.2.13.33.1.1 | RowinOpticalPowerLaneHighEntry | not-accessible | current | Entry of inOpticalPowerLaneHighTable |
| 1.3.6.1.4.1.42229.1.2.13.33.1.1.1 | ColumninOpticalPowerLaneHighInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.33.1.1.2 | ColumninOpticalPowerLaneHighAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.33.1.1.3 | ColumninOpticalPowerLaneHighMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.33.1.1.4 | ColumninOpticalPowerLaneHighMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.34 | NodeinOpticalPowerLaneLow | |||
| 1.3.6.1.4.1.42229.1.2.13.34.1 | TableinOpticalPowerLaneLowTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for lowest value of RX lane optical power |
| 1.3.6.1.4.1.42229.1.2.13.34.1.1 | RowinOpticalPowerLaneLowEntry | not-accessible | current | Entry of inOpticalPowerLaneLowTable |
| 1.3.6.1.4.1.42229.1.2.13.34.1.1.1 | ColumninOpticalPowerLaneLowInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.34.1.1.2 | ColumninOpticalPowerLaneLowAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.34.1.1.3 | ColumninOpticalPowerLaneLowMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.34.1.1.4 | ColumninOpticalPowerLaneLowMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.35 | NodeinOpticalPowerLaneTotal | |||
| 1.3.6.1.4.1.42229.1.2.13.35.1 | TableinOpticalPowerLaneTotalTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for total value of RX lane optical power |
| 1.3.6.1.4.1.42229.1.2.13.35.1.1 | RowinOpticalPowerLaneTotalEntry | not-accessible | current | Entry of inOpticalPowerLaneTotalTable |
| 1.3.6.1.4.1.42229.1.2.13.35.1.1.1 | ColumninOpticalPowerLaneTotalInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.35.1.1.2 | ColumninOpticalPowerLaneTotalAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.35.1.1.3 | ColumninOpticalPowerLaneTotalMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.35.1.1.4 | ColumninOpticalPowerLaneTotalMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.36 | NodeoutOpticalPowerLaneHigh | |||
| 1.3.6.1.4.1.42229.1.2.13.36.1 | TableoutOpticalPowerLaneHighTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for highest value of TX lane optical power |
| 1.3.6.1.4.1.42229.1.2.13.36.1.1 | RowoutOpticalPowerLaneHighEntry | not-accessible | current | Entry of outOpticalPowerLaneHighTable |
| 1.3.6.1.4.1.42229.1.2.13.36.1.1.1 | ColumnoutOpticalPowerLaneHighInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.36.1.1.2 | ColumnoutOpticalPowerLaneHighAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.36.1.1.3 | ColumnoutOpticalPowerLaneHighMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.36.1.1.4 | ColumnoutOpticalPowerLaneHighMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.37 | NodeoutOpticalPowerLaneLow | |||
| 1.3.6.1.4.1.42229.1.2.13.37.1 | TableoutOpticalPowerLaneLowTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for lowest value of TX lane optical power |
| 1.3.6.1.4.1.42229.1.2.13.37.1.1 | RowoutOpticalPowerLaneLowEntry | not-accessible | current | Entry of outOpticalPowerLaneLowTable |
| 1.3.6.1.4.1.42229.1.2.13.37.1.1.1 | ColumnoutOpticalPowerLaneLowInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.37.1.1.2 | ColumnoutOpticalPowerLaneLowAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.37.1.1.3 | ColumnoutOpticalPowerLaneLowMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.37.1.1.4 | ColumnoutOpticalPowerLaneLowMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.38 | NodeoutOpticalPowerLaneTotal | |||
| 1.3.6.1.4.1.42229.1.2.13.38.1 | TableoutOpticalPowerLaneTotalTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for total value of TX lane optical power |
| 1.3.6.1.4.1.42229.1.2.13.38.1.1 | RowoutOpticalPowerLaneTotalEntry | not-accessible | current | Entry of outOpticalPowerLaneTotalTable |
| 1.3.6.1.4.1.42229.1.2.13.38.1.1.1 | ColumnoutOpticalPowerLaneTotalInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.38.1.1.2 | ColumnoutOpticalPowerLaneTotalAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.38.1.1.3 | ColumnoutOpticalPowerLaneTotalMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.38.1.1.4 | ColumnoutOpticalPowerLaneTotalMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.39 | NodemoduleTemperature | |||
| 1.3.6.1.4.1.42229.1.2.13.39.1 | TablemoduleTemperatureTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for module temperature |
| 1.3.6.1.4.1.42229.1.2.13.39.1.1 | RowmoduleTemperatureEntry | not-accessible | current | Entry of moduleTemperatureTable |
| 1.3.6.1.4.1.42229.1.2.13.39.1.1.1 | ColumnmoduleTemperatureInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.39.1.1.2 | ColumnmoduleTemperatureAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.39.1.1.3 | ColumnmoduleTemperatureMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.39.1.1.4 | ColumnmoduleTemperatureMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.40 | NodeinletTemperature | |||
| 1.3.6.1.4.1.42229.1.2.13.40.1 | TableinletTemperatureTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for inlet temperature |
| 1.3.6.1.4.1.42229.1.2.13.40.1.1 | RowinletTemperatureEntry | not-accessible | current | Entry of inletTemperatureTable |
| 1.3.6.1.4.1.42229.1.2.13.40.1.1.1 | ColumninletTemperatureInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.40.1.1.2 | ColumninletTemperatureAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.40.1.1.3 | ColumninletTemperatureMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.40.1.1.4 | ColumninletTemperatureMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.41 | NodeoutletTemperature | |||
| 1.3.6.1.4.1.42229.1.2.13.41.1 | TableoutletTemperatureTable | not-accessible | current | statistics value: average, minimum, maximum and instant value for outlet temperature |
| 1.3.6.1.4.1.42229.1.2.13.41.1.1 | RowoutletTemperatureEntry | not-accessible | current | Entry of outletTemperatureTable |
| 1.3.6.1.4.1.42229.1.2.13.41.1.1.1 | ColumnoutletTemperatureInstant | read-only | current | the instant value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.41.1.1.2 | ColumnoutletTemperatureAvg | read-only | current | the average value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.41.1.1.3 | ColumnoutletTemperatureMin | read-only | current | the minimum value of statistics counter |
| 1.3.6.1.4.1.42229.1.2.13.41.1.1.4 | ColumnoutletTemperatureMax | read-only | current | the maximum value of statistics counter |
| 1.3.6.1.5 | Nodesecurity | |||
| 1.3.6.1.5.1 | NodesecurityInfo | |||
| 1.3.6.1.5.1.1 | ScalarsecuritySshPublicKey | read-only | current | The system's public key for use with SSH or SFTP.This is a leaf list, encode by some leafs. |
| 1.3.6.1.5.1.2 | ScalarsecuritySshPublicKeyFingerprint | read-only | current | The fingerprint of the system's public key.This is a leaf list, encode by some leafs. |
| 1.3.6.1.5.1.3 | ScalarsecurityPreLoginMessage | read-only | current | Welcome message displayed before user login default value :****************************************** Warning ****************************************** This s… |
| 1.3.6.1.5.1.4 | ScalarsecurityWarningMessage | read-only | current | Welcome message displayed after user login default value :****************************************** Warning ****************************************** This sy… |
| 1.3.6.1.5.1.5 | ScalarsecurityAaaAuthenticationMethod | read-only | current | specify authentication method for the user login to the NE. default value :local-only |
| 1.3.6.1.5.1.6 | ScalarsecuritySystemFips | read-only | current | specifies whether the system security is operating in compliance with FIPS. default value :disabled |
| 1.3.6.1.5.1.7 | ScalarsecurityHttpSupport | read-only | current | Defines whether unsecure HTTP protocol is allowed; includes file transfer, or any other application that uses HTTP default value :disabled |
| 1.3.6.1.5.2 | Nodeuser | |||
| 1.3.6.1.5.2.1 | TableuserTable | not-accessible | current | NULL |
| 1.3.6.1.5.2.1.1 | RowuserEntry | not-accessible | current | Entry of userTable |
| 1.3.6.1.5.2.1.1.1 | ColumnuserName | read-only | current | User name. |
| 1.3.6.1.5.2.1.1.2 | ColumnuserPassword | read-only | current | The password of the user. |
| 1.3.6.1.5.2.1.1.3 | ColumnuserClass | read-only | current | The access class for the user. default value :supervision |
| 1.3.6.1.5.2.1.1.4 | ColumnuserMaxInvalidLogin | read-only | current | This attribute is the maximum number of consecutive and invalid login attempts before an account is suspended (lockedout). default value :3 |
| 1.3.6.1.5.2.1.1.5 | ColumnuserSuspensionTime | read-only | current | This attribute is the duration of UID suspension following consecutive invalid login attempts. Setting the value to 0 disables this attribute. UNITS:seconds de… |
| 1.3.6.1.5.2.1.1.6 | ColumnuserTimeout | read-only | current | This attribute is the Session Time Out Interval. If there are no messages between the user and the NE over the Time Out interval, the session is logged off. Se… |
| 1.3.6.1.5.2.1.1.7 | ColumnuserPasswordAgingInterval | read-only | current | This attribute is the Password Aging Interval. Setting the value to 0 disables this attribute. UNITS:days default value :0 |
| 1.3.6.1.5.2.1.1.8 | ColumnuserPasswordExpirationDate | read-only | current | This attribute shows the password expiration date. |
| 1.3.6.1.5.2.1.1.9 | ColumnuserAdminStatus | read-only | current | The attribute allows administrators to modify the user administration status. default value :enabled |
| 1.3.6.1.5.2.1.1.10 | ColumnuserStatus | read-only | current | This attribute shows the user status. User with status 'enabled' will have access to the system. User with status 'disabled' not have access to the system. Use… |
| 1.3.6.1.5.2.1.1.11 | ColumnuserMaxSessions | read-only | current | This attribute specifies the maximum number of sessions allowed for this user. default value :6 |
| 1.3.6.1.5.2.1.1.12 | ColumnuserLastLoginDate | read-only | current | The last login date/time of the user. default value :1970-01-01T00:00:00Z |
| 1.3.6.1.5.2.1.1.13 | ColumnuserAaaType | read-only | current | Indicates the authentication method of the user. default value :local |
| 1.3.6.1.5.3 | Nodesession | |||
| 1.3.6.1.5.3.1 | TablesessionTable | not-accessible | current | NULL |
| 1.3.6.1.5.3.1.1 | RowsessionEntry | not-accessible | current | Entry of sessionTable |
| 1.3.6.1.5.3.1.1.1 | ColumnsessionId | read-only | current | Specifies a unique identifier of the current session. It indicates the IP address and transport layer port number associated with this session. If the session … |
| 1.3.6.1.5.3.1.1.2 | ColumnsessionUser | read-only | current | Points to a user instance. |
| 1.3.6.1.5.3.1.1.3 | ColumnsessionType | read-only | current | Session type. |
| 1.3.6.1.5.3.1.1.4 | ColumnsessionProtocol | read-only | current | Indicates which protocol has been used to establish the session. |
| 1.3.6.1.5.3.1.1.5 | ColumnsessionCreatedTime | read-only | current | The timestamp the user has created this session. |
| 1.3.6.1.5.4 | NodeaaaServer | |||
| 1.3.6.1.5.4.1 | TableaaaServerTable | not-accessible | current | NULL |
| 1.3.6.1.5.4.1.1 | RowaaaServerEntry | not-accessible | current | Entry of aaaServerTable |
| 1.3.6.1.5.4.1.1.1 | ColumnaaaServerServerName | read-only | current | specify the name of aaa server. |
| 1.3.6.1.5.4.1.1.2 | ColumnaaaServerServerPriority | read-only | current | This is used to sort the servers in the order of precedence. |
| 1.3.6.1.5.4.1.1.3 | ColumnaaaServerProtocolSupported | read-only | current | specify the protocol used for AAA. default value :TACACSPLUS |
| 1.3.6.1.5.4.1.1.4 | ColumnaaaServerServerIp | read-only | current | The IPv4 address of AAA server. |
| 1.3.6.1.5.4.1.1.5 | ColumnaaaServerServerPort | read-only | current | AAA server port number. default value :49 |
| 1.3.6.1.5.4.1.1.6 | ColumnaaaServerSharedSecret | read-only | current | The shared secret of the aaa server. The shared secret will be displayed as *. default value :sharedkey |
| 1.3.6.1.5.4.1.1.7 | ColumnaaaServerRoleSupported | read-only | current | specify the role of the server for AAA. default value :authentication authorization |
| 1.3.6.1.5.4.1.1.8 | ColumnaaaServerAdminStatus | read-only | current | The administrative state specifes the permission to use or prohibition against using the resource. The administrative state can be modified by the user. defaul… |
| 1.3.6.1.5.4.1.1.9 | ColumnaaaServerTimeOut | read-only | current | Specifies the response timeout of Access-Request messages sent to a AAA server in seconds. UNITS:seconds default value :5 |
| 1.3.6.1.5.4.1.1.10 | ColumnaaaServerRetry | read-only | current | Specifies the number of attempted Access-Request messages to a single AAA server before failing authentication. default value :3 |
| 1.3.6.1.5.5 | NodekeySyncSession | |||
| 1.3.6.1.5.5.1 | TablekeySyncSessionTable | not-accessible | current | TLS session to synchronize ODU encryption key. |
| 1.3.6.1.5.5.1.1 | RowkeySyncSessionEntry | not-accessible | current | Entry of keySyncSessionTable |
| 1.3.6.1.5.5.1.1.1 | ColumnkeySyncSessionId | read-only | current | Specifies a unique identifier of the key synchronization session. |
| 1.3.6.1.5.5.1.1.2 | ColumnkeySyncSessionAdminStatus | read-only | current | The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and o… |
| 1.3.6.1.5.5.1.1.4 | ColumnkeySyncSessionSessionStatus | read-only | current | Indicating the status of key sync session. |
| 1.3.6.1.5.5.1.1.5 | ColumnkeySyncSessionRemoteIp | read-only | current | The IP address of remote session server. |
| 1.3.6.1.5.5.1.1.6 | ColumnkeySyncSessionRemotePort | read-only | current | The port number of remote session server. default value :8443 |
| 1.3.6.1.5.5.1.1.7 | ColumnkeySyncSessionLocalIp | read-only | current | The source IP address of a manual session. |
| 1.3.6.1.5.5.1.1.8 | ColumnkeySyncSessionLocalPort | read-only | current | The source port number of a manual session. |
| 1.3.6.1.5.5.1.1.9 | ColumnkeySyncSessionSourceAddressFrom | read-only | current | specifies the interface of the source IP address of the outgoing packets. Conditions:../key-sync-session-type = 'manual' default value :auto |
| 1.3.6.1.5.5.1.1.10 | ColumnkeySyncSessionConnectedTime | read-only | current | The timestamp the user has created this session. |
| 1.3.6.1.5.5.1.1.11 | ColumnkeySyncSessionType | read-only | current | Indicating the type of key sync session, 'manual' is for the session user configured, and 'auto' is for the session automatically created by system. default va… |
| 1.3.6.1.5.5.1.1.12 | ColumnkeySyncSessionAuthType | read-only | current | Indicating the authentication type of the key sync session. default value :proprietary-psk |
| 1.3.6.1.5.5.1.1.13 | ColumnkeySyncSessionLocalCertificate | read-only | current | Previously installed certificate that authenticates the NE. default value :none |
| 1.3.6.1.5.7 | NodepskMap | |||
| 1.3.6.1.5.7.1 | TablepskMapTable | not-accessible | current | NULL |
| 1.3.6.1.5.7.1.1 | RowpskMapEntry | not-accessible | current | Entry of pskMapTable |
| 1.3.6.1.5.7.1.1.1 | ColumnpskMapPskIdentity | read-only | current | The PSK identity encoded as a UTF-8 string. For details how certain common PSK identity formats can be encoded in UTF-8, see section 5.1. of RFC 4279. |
| 1.3.6.1.5.7.1.1.2 | ColumnpskMapKey | read-only | current | The key associated with the PSK identity |
| 1.3.6.1.5.7.1.1.4 | ColumnpskMapPskStatus | read-only | current | Status of the psk-map. psk-map can be updated only if psk-status is in init or sync status; the previous psk-map updating can be cancelled only if psk-satus is… |
| 1.3.6.1.5.7.1.1.5 | ColumnpskMapPskInfo | read-only | current | The label of the psk-map. default value : |
| 1.3.6.1.5.7.1.1.6 | ColumnpskMapWarningTimer | read-only | current | Warning Time before psk-map updating completes. UNITS:minutes default value :5 |
| 1.3.6.1.5.7.1.1.7 | ColumnpskMapCriticalTimer | read-only | current | Critical time before psk-map updating completes. UNITS:minutes default value :30 |
| 1.3.6.1.5.7.1.1.8 | ColumnpskMapTrafficOffTimer | read-only | current | Traffic off time before psk-map updating completes. UNITS:minutes default value :1440 |
| 1.3.6.1.5.7.1.1.9 | ColumnpskMapEffectiveTimestamp | read-only | current | Indicates the Time of new psk starts to take effect. |
| 1.3.6.1.5.9 | Nodekey | |||
| 1.3.6.1.5.9.1 | TablekeyTable | not-accessible | current | A key maintained by the keystore. |
| 1.3.6.1.5.9.1.1 | RowkeyEntry | not-accessible | current | Entry of keyTable |
| 1.3.6.1.5.9.1.1.1 | ColumnkeyName | read-only | current | An arbitrary name for the key. |
| 1.3.6.1.5.9.1.1.2 | ColumnkeyAlgorithmIdentifier | read-only | current | Identifies which algorithm is to be used with the key. This value determines how the 'private-key' and 'public-key' fields are interpreted. |
| 1.3.6.1.5.9.1.1.3 | ColumnkeyPublicKey | read-only | current | A binary string that contains the value of the public key. The interpretation of the content is defined in the registration of the key algorithm. For example, … |
| 1.3.6.1.5.10 | Nodecertificate | |||
| 1.3.6.1.5.10.1 | TablecertificateTable | not-accessible | current | A certificate for this private key. |
| 1.3.6.1.5.10.1.1 | RowcertificateEntry | not-accessible | current | Entry of certificateTable |
| 1.3.6.1.5.10.1.1.1 | ColumncertificateName | read-only | current | An arbitrary name for the certificate. The name must be a unique across all keys, not just within this key. |
| 1.3.6.1.5.10.1.1.2 | ColumncertificateVersion | read-only | current | version of the certificate. default value :x509v1 |
| 1.3.6.1.5.10.1.1.3 | ColumncertificateSerialNumber | read-only | current | serial number of the certificate. |
| 1.3.6.1.5.10.1.1.4 | ColumncertificateSignatureAlgorithm | read-only | current | signature algorithm of the certificate. |
| 1.3.6.1.5.10.1.1.5 | ColumncertificateIssuer | read-only | current | issuer of the certificate. |
| 1.3.6.1.5.10.1.1.6 | ColumncertificateValidFrom | read-only | current | valid-from date and time of the certificate. |
| 1.3.6.1.5.10.1.1.7 | ColumncertificateValidTo | read-only | current | valid-to date and time of the certificate. |
| 1.3.6.1.5.10.1.1.8 | ColumncertificateSubject | read-only | current | subject of the certificate. |
| 1.3.6.1.5.10.1.1.9 | ColumncertificatePublicKeyAlgorithm | read-only | current | public-key-algorithm of the certificate. |
| 1.3.6.1.5.11 | NodetrustedCertificateGroup | |||
| 1.3.6.1.5.11.1 | TabletrustedCertificateGroupTable | not-accessible | current | A list of trusted certificates. These certificates can be used by a server to authenticate clients, or by clients to authenticate servers. The certificates may… |
| 1.3.6.1.5.11.1.1 | RowtrustedCertificateGroupEntry | not-accessible | current | Entry of trustedCertificateGroupTable |
| 1.3.6.1.5.11.1.1.1 | ColumntrustedCertificateGroupName | read-only | current | An arbitrary name for this list of trusted certificates. |
| 1.3.6.1.5.12 | NodetrustedCertificate | |||
| 1.3.6.1.5.12.1 | TabletrustedCertificateTable | not-accessible | current | A trusted certificate for a specific use. Note, this 'certificate' is a list in order to encode any associated intermediate certificates. |
| 1.3.6.1.5.12.1.1 | RowtrustedCertificateEntry | not-accessible | current | Entry of trustedCertificateTable |
| 1.3.6.1.5.12.1.1.1 | ColumntrustedCertificateName | read-only | current | An arbitrary name for this trusted certificate. Must be unique across all lists of trusted certificates (not just this list) so that a leafref to it from anoth… |
| 1.3.6.1.5.12.1.1.2 | ColumntrustedCertificateVersion | read-only | current | version of the certificate. default value :x509v1 |
| 1.3.6.1.5.12.1.1.3 | ColumntrustedCertificateSerialNumber | read-only | current | serial number of the certificate. |
| 1.3.6.1.5.12.1.1.4 | ColumntrustedCertificateSignatureAlgorithm | read-only | current | signature algorithm of the certificate. |
| 1.3.6.1.5.12.1.1.5 | ColumntrustedCertificateIssuer | read-only | current | issuer of the certificate. |
| 1.3.6.1.5.12.1.1.6 | ColumntrustedCertificateValidFrom | read-only | current | valid-from date and time of the certificate. |
| 1.3.6.1.5.12.1.1.7 | ColumntrustedCertificateValidTo | read-only | current | valid-to date and time of the certificate. |
| 1.3.6.1.5.12.1.1.8 | ColumntrustedCertificateSubject | read-only | current | subject of the certificate. |
| 1.3.6.1.5.12.1.1.9 | ColumntrustedCertificatePublicKeyAlgorithm | read-only | current | public-key-algorithm of the certificate. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CoriantCommonOtnEncryStatusEnum | BITS { notAvailable (0), handshake (1), keyInitializing (2), keyInSync (3), unreachable (4), mismatch (5), connectFailed (6), disabled (7), encryptFail (8), encryptNormal (9), authenticationFailed (10), trafficSquelched (11) } | current | NULL |
| CoriantCommonOtnKeySyncSession | OCTET STRING | current | Indicate the associated session for the ODU channel to synchronize keys. |
| CoriantCommonpmThresholdValue | OCTET STRING (SIZE (1..32)) | current | NULL |
| CoriantCommonpmUnitOfValue | INTEGER { notApplicable (0), dbm (1), microseconds (2), ps (3), psNm (4), db (5), seconds (6), packets (7), events (8), octets (9), bits (10), bitsS (11), blocks (12), times (13), percentage (14), bitRatio (15), mhz (16), degreec (17), frames (18) } | current | NULL |
| CoriantFileSwTypesDeviceFwVersion | OCTET STRING (SIZE (0..64)) | current | NULL |
| CoriantFileSwTypesDeviceName | OCTET STRING (SIZE (0..64)) | current | NULL |
| CoriantFileSwTypesSwloadProduct | OCTET STRING (SIZE (0..32)) | current | NULL |
| CoriantFileSwTypesSwloadVendor | OCTET STRING (SIZE (0..32)) | current | NULL |
| CoriantFileSwTypesSwVersion | OCTET STRING (SIZE (0..20)) | current | NULL |
| CoriantFmtypesConditionType | INTEGER { idp (1), rupDeg (2), rupFail (3), meaHwvm (4), mea (5), pwra (6), pwrb (7), rupMiss (8), sbanr (9), sdf (10), thermal (11), sdcardmiss (12), sdcardfail (13), mgmtrst (14), progflt (15), ntppu (16), linkdown (17), los (18), lol (19), lofOtu (20), lomOtu (21), timOtu (22), bdiOtu (23), bersdOtu (24), aisOtu (25), bersdOdu (26), lckOdu (27), ociOdu (28), aisOdu (29), bdiOdu (30), timOdu (31), plmOdu (32), loomfi (33), msim (34), loflom (35), csfOpu (36), losync (37), lf (38), rf (39), csfLosGfp (40), csfLosyncGfp (41), csfFdiGfp (42), csfRdiGfp (43), lofdGfp (44), plmGfp (45), lpbkfacility (46), lpbkfterm (47), contcom (48), latchOpen (49), lof (50), aisL (51), msAis (52), timR (53), rsTim (54), rfiL (55), msRfi (56), cabs (99), oog (100), connectFail (101), encryptFail (102), keyexFail (103), bdi (104), bdiO (105), autoshutoff (106), fibrconnMiss (107), bdiP (108), losMsa (109), protna (110), switchThres (111), losyncCd (112), updatePskFail (113), encTrafficSquelch (114), tSe (10001), tDropevents (10002), tOctets (10003), tPkts (10004), tBroadcastpkts (10005), tMulticastpkts (10006), tCrcalignerrors (10007), tUndersizepkts (10008), tOversizepkts (10009), tFragments (10010), tJabbers (10011), tPkts64octets (10012), tPkts65to127octets (10013), tPkts128to255octets (10014), tPkts256to511octets (10015), tPkts512to1023octets (10016), tPkts1024to1518octets (10017), tUtilHt (10018), tBeFec (10019), tUbeFec (10020), tBerFecHt (10021), tEbOtu (10022), tEsOtu (10023), tSesOtu (10024), tUasOtu (10025), tEbOdu (10026), tEsOdu (10027), tSesOdu (10028), tUasOdu (10029), tDelayOduHt (10030), tDelayOduLt (10031), tDgdHt (10032), tCdLt (10033), tCdHt (10034), tOsnrLt (10035), tLoss (10036), tOprHt (10037), tOprLt (10038), tQfactorLt (10039), tOptHt (10040), tOptLt (10041), tPdlHt (10042), tOftHt (10043), tOftLt (10044), tOfrHt (10045), tOfrLt (10046), tCvS (10047), tEsS (10048), tSesS (10049), tUasS (10050), tSefs (10051), tBbeRs (10052), tEsRs (10053), tSesRs (10054), tUasRs (10055), tOfs (10056), tOprLaneHt (10057), tOprLaneLt (10058), tOprTotalHt (10059), tOprTotalLt (10060), tOptLaneHt (10061), tOptLaneLt (10062), tOptTotalHt (10063), tOptTotalLt (10064), tLossTx (10065), tLossRx (10066), init (11001), swupgCompld (11002), swupgFail (11003), swupgRollback (11004), upgCompld (11005), upgFail (11006), intrusion (11007), userlock (11008), swupgIp (11009), ztcFail (11010), ztcComplete (11011), dbactFail (11012), inactive (11013), restart (11014), fstoprot (11015), fstowkg (11016), lockout (11017), mantoprot (11018), mantowkg (11019), noreq (11020), sdonprot (11021), sdonwkg (11022), sfonprot (11023), sfonwkg (11024), wkswpr (11025), prswwk (11026), wtr (11027), dnr (11028), authnFailed (11029), loginFailed (11030), candidatePskMismatch (11031), updatePskCompld (11032), candidatePskAuthenticated (11033), updatePskReqRcv (11034) } | current | NULL |
| CoriantFmtypesEntityTypeFm | INTEGER { t10gbe (1), t40gbe (2), t100gbe (3), ochOs (4), otu4 (5), otuc2 (6), otuc3 (7), oduc2 (8), oduc3 (9), odu4 (10), odu3 (11), odu2e (12), odu2 (13), shelf (14), slot (15), port (16), fan (17), chm1 (18), chm2 (19), bfm (20), mgteth (21), ntppeer (22), db (23), sw (24), log (25), security (26), psu (27), cfp2 (28), qsfp (29), time (30), user (31), ztc (32), ppp (33), fc8g (34), fc16g (35), oduflex (36), otu2 (37), otu2e (38), oc192 (39), stm64 (40), oms (41), gopt (42), paoscofp2 (43), pabaofp2 (44), pairofp2 (45), palrofp2 (46), paerofp2 (47), bahofp2 (48), subslot (50), occ2 (51), omd96 (52), amplifier (53), omd48S (54), omd48O (55), chm1g (56), tdcmofp2 (57), bauofp2 (58), paulrofp2 (59), osc (60), ots (61), sfpplus (62), xtm2 (63), omd8b1ofp2 (64), omd8b2ofp2 (65), opsofp2 (66), ops (67), chm1lh (68), chm2lh (69), t10gwanSonet (70), t10gwanSdh (71), otdrofp2 (72) } | current | NULL |
| CoriantFmtypesServiceAffectFm | INTEGER { sa (1), nsa (2) } | current | SA: service affecting NSA: non-service affecting |
| CoriantFmtypesSeverityLevel | INTEGER { notApplicable (0), critical (1), major (2), minor (3), notAlarmed (4), notReported (5), cleared (6) } | current | alarm severity |
| CoriantPmtypesPmParameter | INTEGER { all (0), eb (1), es (2), ses (3), uas (4), delay (5), delayMax (6), delayMin (7), dgd (8), dgdMax (9), dgdMin (10), cd (11), cdMax (12), cdMin (13), osnr (14), osnrMax (15), osnrMin (16), qFactor (17), qFactorMax (18), qFactorMin (19), opr (20), oprMax (21), oprMin (22), loss (23), se (24), dropevents (25), octets (26), pkts (27), broadcastpkts (28), multicastpkts (29), crcalignerrors (30), undersizepkts (31), oversizepkts (32), fragments (33), jabbers (34), pkts64octets (35), pkts65to127octets (36), pkts128to255octets (37), pkts256to511octets (38), pkts512to1023octets (39), pkts1024to1518octets (40), utilization (41), utilizationMax (42), utilizationMin (43), beFec (44), ubeFec (45), berFec (46), berFecMax (47), berFecMin (48), opt (49), optMax (50), optMin (51), pdl (52), pdlMax (53), pdlMin (54), oft (55), oftMax (56), oftMin (57), ofr (58), ofrMax (59), ofrMin (60), bbe (61), ofs (65), cv (66), sefs (67), oprLaneHigh (68), oprLaneHighMax (69), oprLaneHighMin (70), oprLaneLow (71), oprLaneLowMax (72), oprLaneLowMin (73), oprTotal (74), oprTotalMax (75), oprTotalMin (76), optLaneHigh (77), optLaneHighMax (78), optLaneHighMin (79), optLaneLow (80), optLaneLowMax (81), optLaneLowMin (82), optTotal (83), optTotalMax (84), optTotalMin (85), tmodule (86), tinlet (87), toutlet (88), tmoduleMax (89), tmoduleMin (90), tinletMax (91), tinletMin (92), toutletMax (93), toutletMin (94), berPostFec (95), berPostFecMax (96), berPostFecMin (97), psd (98), psc (99), lossTx (100), lossRx (101), encryptionFailRx (102) } | current | NULL |
| CoriantPmtypesPmpType | INTEGER { notApplicable (0), oduNendEgress (1), oduNendIngress (2), otuNendIngress (3), delayMeasurementOdu (4), coherentOpticalInterface (5), opticalPower (6), loss (7), ethernetNendIngress (8), ethernetNendEgress (9), fec (10), fcNendIngress (11), sonetSNendIngress (12), sdhRsNendIngress (13), sonetSNendEgress (14), sdhRsNendEgress (15), shelfTemperature (16), equipmentTemperature (17), opticalPowerLane (18), protectionSwitch (19), lossTxrx (20), opticalPowerIngress (21), opticalPowerEgress (22), oduEncryption (23), all (100) } | current | NULL |
| CoriantPmtypesValidityType | INTEGER { complete (1), partial (2), notAvailable (3) } | current | NULL |
| CoriantRpcConfigurableLedTypes | INTEGER { ledTest (1), locationLed (2) } | current | Types of LEDs that can be enabled/disabled by the user. |
| CoriantTypesCardType | INTEGER { fan (11), psu (12), chm1 (13), chm2 (14), xtm2 (16), chm1g (17), chm1lh (18), chm2lh (19), occ2 (100), omd96 (101), paoscofp2 (102), pabaofp2 (103), pairofp2 (104), palrofp2 (105), paerofp2 (106), bahofp2 (107), omd48S (109), omd48O (110), tdcmofp2 (111), bauofp2 (112), paulrofp2 (113), omd8b1ofp2 (114), omd8b2ofp2 (115), opsofp2 (116), otdrofp2 (117) } | current | NULL |
| CoriantTypesCreationscope | INTEGER { systemCreated (0), userCreated (1) } | current | NULL |
| CoriantTypesDate | OCTET STRING (SIZE (0|10)) | current | The type of date show the mm/dd/year. The date type does not allow negative years |
| CoriantTypesDBPrecision1 | OCTET STRING | current | dB for 0.1 precision UNITS:dB |
| CoriantTypesDecimalFract1 | OCTET STRING | current | NULL |
| CoriantTypesDuplexMode | INTEGER { na (0), full (1), half (2) } | current | NULL |
| CoriantTypesEnableSwitch | INTEGER { enabled (1), disabled (2) } | current | NULL |
| CoriantTypesEquipmentType | INTEGER { empty (0), filled (1), reserved (2), unrecognized (3), fan (11), psu (12), chm1 (13), chm2 (14), bfm (15), xtm2 (16), chm1g (17), chm1lh (18), chm2lh (19), qsfp (21), cfp2 (22), sfpplus (23), occ2 (100), omd96 (101), paoscofp2 (102), pabaofp2 (103), pairofp2 (104), palrofp2 (105), paerofp2 (106), bahofp2 (107), omd48S (109), omd48O (110), tdcmofp2 (111), bauofp2 (112), paulrofp2 (113), omd8b1ofp2 (114), omd8b2ofp2 (115), opsofp2 (116), otdrofp2 (117) } | current | NULL |
| CoriantTypesEthernetRate | INTEGER { na (0), t10 (1), t100 (2), t1000 (3), maxRate (4) } | current | NULL UNITS:Mbit/s |
| CoriantTypesEthFec | INTEGER { enabled (1), disabled (2), auto (3) } | current | NULL |
| CoriantTypesFilename | OCTET STRING (SIZE (1..128)) | current | String representing a filename |
| CoriantTypesFlowControl | INTEGER { na (0), off (1), txRx (2), tx (3), rx (4) } | current | NULL |
| CoriantTypesFreq | Unsigned32 (0|191300000..196111250) | current | Supported Frequency Range. UNITS:MHz |
| CoriantTypesFtpPath | OCTET STRING (SIZE (1..1024)) | current | Representation of a FTP/STPF/FTPS/SCP path 'ftp://user@hostname/directorypath/filename' or an HTTP URL 'http://domain.com/filename' |
| CoriantTypesManagementDirection | INTEGER { notApplicable (0), ingress (1), egress (2) } | current | NULL |
| CoriantTypesManagementLocation | INTEGER { nearEnd (1), farEnd (2), notApplicable (3) } | current | NULL |
| CoriantTypesManagementTimePeriod | INTEGER { notApplicable (0), t15min (1), t24h (2), all (4), t1min (5), t1h (6) } | current | NULL |
| CoriantTypesNameIdentifier | OCTET STRING (SIZE (1..32)) | current | NULL |
| CoriantTypesNumberList | OCTET STRING (SIZE (0..255)) | current | List of numbers using ',' as separator and '..' to represent ranges. Examples: '12' , '1..4' , '1,5,10..12,20' |
| CoriantTypesOduType | INTEGER { unused (0), odu0 (1), odu1 (2), odu2 (3), odu2e (4), odu3 (5), odu3e (6), odu4 (7), oduflex (8), oduc2 (9), oduc3 (10) } | current | NULL |
| CoriantTypesOnOff | INTEGER { on (1), off (2) } | current | NULL |
| CoriantTypesOpticalDB | OCTET STRING | current | Optical Attribute value with Unit dB UNITS:dB |
| CoriantTypesOpticalPower | OCTET STRING | current | Optical Power value in dBm UNITS:dBm |
| CoriantTypesOtukFec | INTEGER { sdfec15 (1), sdfec25 (2), g709 (3), i4 (4), i7 (5), nofec (6), staircase7 (7), sdfec15nd (8) } | current | NULL |
| CoriantTypesPassword | OCTET STRING (SIZE (8..32)) | current | Any ASCII values between 32 and 126 decimal |
| CoriantTypesPercentage | Unsigned32 (0..100) | current | NULL UNITS:% |
| CoriantTypesPluggableFormFactor | INTEGER { notApplicable (0), unrecognized (1), qsfpplus (2), qsfp28 (3), cfp2Aco (4), sfpplus (5), sfp (6), xfp (7) } | current | Indicating the exact form factor of the pluggable. |
| CoriantTypesPluggableType | INTEGER { qsfp (21), cfp2 (22), sfpplus (23) } | current | NULL |
| CoriantTypesPortId | Unsigned32 | current | NULL |
| CoriantTypesPortMode | INTEGER { notApplicable (0), t10gbe (1), t40gbe (2), t100gbe (3), subport (4), qpsk100g (5), t8qam300g (6), t16qam200g (7), fc16g (8), fc8g (9), otu4 (10), otu2 (12), otu2e (13), oc192 (14), stm64 (15), ochosOtu2 (16), ochosOtu2e (17), t8qam200g (18), t10gwanSonet (19), t10gwanSdh (20) } | current | NULL |
| CoriantTypesPower | OCTET STRING | current | Power consumption value in W(WAT) UNITS:W |
| CoriantTypesRtpType | INTEGER { direct (1), static (2), ospfv2 (3) } | current | Type of the routing protocol. |
| CoriantTypesSessionId | OCTET STRING (SIZE (0..21)) | current | NULL |
| CoriantTypesShelfId | Unsigned32 (1..65535) | current | NULL |
| CoriantTypesSlotId | Unsigned32 | current | NULL |
| CoriantTypesSnmpString | OCTET STRING (SIZE (1..32)) | current | NULL |
| CoriantTypesSourceProtocol | INTEGER { direct (1), static (2), ospfv2 (3) } | current | NULL |
| CoriantTypesSubslotId | Unsigned32 | current | NULL |
| CoriantTypesTemperature | OCTET STRING | current | Temperature value in degree Celsius. UNITS:Celsius |
| CoriantTypesTemperaturePrecision3 | OCTET STRING | current | Temperature value in Celsius with 0.001 precision UNITS:Celsius |
| CoriantTypesTestSignalConfig | INTEGER { none (0), rxtx (3) } | current | NULL |
| CoriantTypesTestSignalType | INTEGER { none (0), prbs (1), idle (3) } | current | NULL |
| CoriantTypesTimePeriod | OCTET STRING (SIZE (8)) | current | Representation of a time period in 'hh:mm:ss' |
| CoriantTypesTimMode | INTEGER { none (0), sapi (1), dapi (2), oper (3), sapiDapi (4), sapiOper (5), dapiOper (6), sapiDapiOper (7) } | current | NULL |
| CoriantTypesTypeOfDirection | INTEGER { notApplicable (0), tx (2), rx (3), rxtx (4) } | current | NULL |
| CoriantTypesUserName | OCTET STRING (SIZE (1..20)) | current | According with Linux user-name pattern |
| CoriantTypesYesNo | INTEGER { yes (1), no (2) } | current | NULL |
| IetfInetTypesAsNumber | Unsigned32 | current | The as-number type represents autonomous system numbers which identify an Autonomous System (AS). An AS is a set of routers under a single technical administration, using an interior gateway protocol and common metrics … |
| IetfInetTypesDomainName | OCTET STRING (SIZE (1..253)) | current | The domain-name type represents a DNS domain name. The name SHOULD be fully qualified whenever possible. Internet domain names are only loosely specified. Section 3.5 of RFC 1034 recommends a syntax (modified in Section… |
| IetfInetTypesDscp | Unsigned32 (0..63) | current | The dscp type represents a Differentiated Services Code Point that may be used for marking packets in a traffic stream. In the value set and its semantics, this type is equivalent to the Dscp textual convention of the S… |
| IetfInetTypesHost | OCTET STRING | current | The host type represents either an IP address or a DNS domain name. |
| IetfInetTypesIpAddress | OCTET STRING | current | The ip-address type represents an IP address and is IP version neutral. The format of the textual representation implies the IP version. This type supports scoped addresses by allowing zone identifiers in the address fo… |
| IetfInetTypesIpAddressNoZone | OCTET STRING | current | The ip-address-no-zone type represents an IP address and is IP version neutral. The format of the textual representation implies the IP version. This type does not support scoped addresses since it does not allow zone i… |
| IetfInetTypesIpPrefix | OCTET STRING | current | The ip-prefix type represents an IP prefix and is IP version neutral. The format of the textual representations implies the IP version. |
| IetfInetTypesIpv4Address | OCTET STRING | current | The ipv4-address type represents an IPv4 address in dotted-quad notation. The IPv4 address may include a zone index, separated by a % sign. The zone index is used to disambiguate identical address values. For link-local… |
| IetfInetTypesIpv4AddressNoZone | OCTET STRING | current | An IPv4 address without a zone index. This type, derived from ipv4-address, may be used in situations where the zone is known from the context and hence no zone index is needed. |
| IetfInetTypesIpv4Prefix | OCTET STRING | current | The ipv4-prefix type represents an IPv4 address prefix. The prefix length is given by the number following the slash character and must be less than or equal to 32. A prefix length value of n corresponds to an IP addres… |
| IetfInetTypesIpv6Address | OCTET STRING | current | The ipv6-address type represents an IPv6 address in full, mixed, shortened, and shortened-mixed notation. The IPv6 address may include a zone index, separated by a % sign. The zone index is used to disambiguate identica… |
| IetfInetTypesIpv6AddressNoZone | OCTET STRING | current | An IPv6 address without a zone index. This type, derived from ipv6-address, may be used in situations where the zone is known from the context and hence no zone index is needed. |
| IetfInetTypesIpv6FlowLabel | Unsigned32 (0..1048575) | current | The ipv6-flow-label type represents the flow identifier or Flow Label in an IPv6 packet header that may be used to discriminate traffic flows. In the value set and its semantics, this type is equivalent to the IPv6FlowL… |
| IetfInetTypesIpv6Prefix | OCTET STRING | current | The ipv6-prefix type represents an IPv6 address prefix. The prefix length is given by the number following the slash character and must be less than or equal to 128. A prefix length value of n corresponds to an IP addre… |
| IetfInetTypesIpVersion | INTEGER { unknown (0), ipv4 (1), ipv6 (2) } | current | This value represents the version of the IP protocol. In the value set and its semantics, this type is equivalent to the InetVersion textual convention of the SMIv2. |
| IetfInetTypesPortNumber | Unsigned32 (0..65535) | current | The port-number type represents a 16-bit port number of an Internet transport-layer protocol such as UDP, TCP, DCCP, or SCTP. Port numbers are assigned by IANA. A current list of all assignments is available from <http:… |
| IetfInetTypesUri | OCTET STRING | current | The uri type represents a Uniform Resource Identifier (URI) as defined by STD 66. Objects using the uri type MUST be in US-ASCII encoding, and MUST be normalized as described by RFC 3986 Sections 6.2.1, 6.2.2.1, and 6.2… |
| IetfNetconfAcmAccessOperationsType | BITS { create (0), read (1), update (2), delete (3), exec (4) } | current | NETCONF Access Operation. |
| IetfNetconfAcmActionType | INTEGER { permit (0), deny (1) } | current | Action taken by the server when a particular rule matches. |
| IetfNetconfAcmGroupNameType | OCTET STRING (SIZE (1..65535)) | current | Name of administrative group to which users can be assigned. |
| IetfNetconfAcmMatchallStringType | OCTET STRING | current | The string containing a single asterisk '*' is used to conceptually represent all possible values for the particular leaf using this data type. |
| IetfNetconfAcmNodeInstanceIdentifier | OCTET STRING | current | Path expression used to represent a special data node instance identifier string. A node-instance-identifier value is an unrestricted YANG instance-identifier expression. All the same rules as an instance-identifier app… |
| IetfNetconfAcmUserNameType | OCTET STRING (SIZE (1..65535)) | current | General Purpose Username string. |
| IetfNetconfEditOperationType | INTEGER { merge (0), replace (1), create (2), delete (3), remove (4) } | current | NETCONF 'operation' attribute values |
| IetfNetconfErrorSeverityType | INTEGER { error (0), warning (1) } | current | NETCONF Error Severity |
| IetfNetconfErrorTagType | INTEGER { inUse (0), invalidValue (1), tooBig (2), missingAttribute (3), badAttribute (4), unknownAttribute (5), missingElement (6), badElement (7), unknownElement (8), unknownNamespace (9), accessDenied (10), lockDenied (11), resourceDenied (12), rollbackFailed (13), dataExists (14), dataMissing (15), operationNotSupported (16), operationFailed (17), partialOperation (18), malformedMessage (19) } | current | NETCONF Error Tag |
| IetfNetconfSessionIdOrZeroType | Unsigned32 | current | NETCONF Session Id or Zero to indicate none |
| IetfNetconfSessionIdType | Unsigned32 (1..4294967295) | current | NETCONF Session Id |
| IetfNetconfWithDefaultsWithDefaultsMode | INTEGER { reportAll (0), reportAllTagged (1), trim (2), explicit (3) } | current | Possible modes to report default data. |
| IetfYangTypesCounter32 | Unsigned32 | current | The counter32 type represents a non-negative integer that monotonically increases until it reaches a maximum value of 2^32-1 (4294967295 decimal), when it wraps around and starts increasing again from zero. Counters hav… |
| IetfYangTypesCounter64 | OCTET STRING | current | The counter64 type represents a non-negative integer that monotonically increases until it reaches a maximum value of 2^64-1 (18446744073709551615 decimal), when it wraps around and starts increasing again from zero. Co… |
| IetfYangTypesDateAndTime | OCTET STRING | current | The date-and-time type is a profile of the ISO 8601 standard for representation of dates and times using the Gregorian calendar. The profile is defined by the date-time production in Section 5.6 of RFC 3339. The date-an… |
| IetfYangTypesDottedQuad | OCTET STRING | current | An unsigned 32-bit number expressed in the dotted-quad notation, i.e., four octets written as decimal numbers and separated with the '.' (full stop) character. |
| IetfYangTypesGauge32 | Unsigned32 | current | The gauge32 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value cannot be greater than 2^32-1 (4294967295 dec… |
| IetfYangTypesGauge64 | OCTET STRING | current | The gauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value cannot be greater than 2^64-1 (18446744073709… |
| IetfYangTypesHexString | OCTET STRING | current | A hexadecimal string with octets represented as hex digits separated by colons. The canonical representation uses lowercase characters. |
| IetfYangTypesMacAddress | OCTET STRING | current | The mac-address type represents an IEEE 802 MAC address. The canonical representation uses lowercase characters. In the value set and its semantics, this type is equivalent to the MacAddress textual convention of the SM… |
| IetfYangTypesObjectIdentifier | OCTET STRING | current | The object-identifier type represents administratively assigned names in a registration-hierarchical-name tree. Values of this type are denoted as a sequence of numerical non-negative sub-identifier values. Each sub-ide… |
| IetfYangTypesObjectIdentifier128 | OCTET STRING | current | This type represents object-identifiers restricted to 128 sub-identifiers. In the value set and its semantics, this type is equivalent to the OBJECT IDENTIFIER type of the SMIv2. |
| IetfYangTypesPhysAddress | OCTET STRING | current | Represents media- or physical-level addresses represented as a sequence octets, each octet represented by two hexadecimal numbers. Octets are separated by colons. The canonical representation uses lowercase characters. … |
| IetfYangTypesTimestamp | Unsigned32 | current | The timestamp type represents the value of an associated timeticks schema node at which a specific occurrence happened. The specific occurrence must be defined in the description of any schema node defined using this ty… |
| IetfYangTypesTimeticks | Unsigned32 | current | The timeticks type represents a non-negative integer that represents the time, modulo 2^32 (4294967296 decimal), in hundredths of a second between two epochs. When a schema node is defined that uses this type, the descr… |
| IetfYangTypesUuid | OCTET STRING | current | A Universally Unique IDentifier in the string representation defined in RFC 4122. The canonical representation uses lowercase characters. The following is an example of a UUID in string representation: f81d4fae-7dec-11d… |
| IetfYangTypesXpath10 | OCTET STRING | current | This type represents an XPATH 1.0 expression. When a schema node is defined that uses this type, the description of the schema node MUST specify the XPath context in which the XPath expression is evaluated. |
| IetfYangTypesYangIdentifier | OCTET STRING (SIZE (1..65535)) | current | A YANG identifier string as defined by the 'identifier' rule in Section 12 of RFC 6020. An identifier must start with an alphabetic character or an underscore followed by an arbitrary sequence of alphabetic or numeric c… |
| IetfYangTypesZeroBasedCounter32 | Unsigned32 | current | The zero-based-counter32 type represents a counter32 that has the defined 'initial' value zero. A schema node of this type will be set to zero (0) on creation and will thereafter increase monotonically until it reaches … |
| IetfYangTypesZeroBasedCounter64 | OCTET STRING | current | The zero-based-counter64 type represents a counter64 that has the defined 'initial' value zero. A schema node of this type will be set to zero (0) on creation and will thereafter increase monotonically until it reaches … |
| KeySyncSessionCertificateRef | OCTET STRING | current | certificate to be referred to. |
| KeySyncSessionInterfaceRef | OCTET STRING | current | Interface to be referred to. |
| LldpLldpSysCap | BITS { other (0), repeater (1), bridge (2), wlanaccesspoint (3), router (4), telephone (5), docsiscabledevice (6), stationonly (7), cvlancomponent (8), svlancomponent (9), twoportmacrelay (10) } | current | NULL |
| OpticalCommonSupportingPort | OCTET STRING | current | References one individual port, or no port at all |
| OtdrOtdrIor | OCTET STRING | current | NULL |
| OtdrOtdrPulseWidth | OCTET STRING | current | NULL |
| OtdrOtdrRange | OCTET STRING | current | NULL |