CPIWF-R-MIB
200 objects
This module defines a portion of the management information base (MIB) for managing LES CP-IWFs. It is meant to be used in connection with the ILMI/AToM MIB and MIB-II's System Group and RFC 2863 which defines the 'ifTable'
Imported Objects
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.20 | NoderadExperimental | |||
| 1.20.5 | IdentitycpIwfMIB | This module defines a portion of the management information base (MIB) for managing LES CP-IWFs. It is meant to be used in connection with the ILMI/AToM MIB an… | ||
| 1.20.5.1 | NodecpIwfMIBObjects | |||
| 1.20.5.1.1 | NodecpIwf | |||
| 1.20.5.1.1.1 | ScalarcpIwfIfIndex | read-only | current | The index of the AAL2 to which this CP-IWF is associated. Default value 0 |
| 1.20.5.1.1.2 | ScalarcpIwfVpi | read-write | current | The VPI of the AAL2 VCC to which this CP-IWF is associated. Default value 0 |
| 1.20.5.1.1.3 | ScalarcpIwfVci | read-write | current | The VCI of the AAL2 VCC to which this CP-IWF is associated. Default value 40 |
| 1.20.5.1.1.4 | ScalarcpIwfVccMib | read-only | current | This object points to the MIB where the VCC configuration information can be found. The value of this object should be as follows:- af-nm-0165 - indicates that… |
| 1.20.5.1.1.5 | ScalarcpIwfNumPotsPorts | read-only | current | The total number of POTS user ports on the CP-IWF. |
| 1.20.5.1.1.6 | ScalarcpIwfNumIsdnBriPorts | read-only | current | The total number of ISDN-BRI user ports on the CP-IWF. |
| 1.20.5.1.1.7 | ScalarcpIwfTimingReference | read-only | current | ntr - network timing reference, voice timing derived from the WAN interface. adaptiveVoice - voice timing derived from incoming cell rate. freeRun - voice timi… |
| 1.20.5.1.1.8 | ScalarcpIwfPotsPortEncodingSelectionMode | read-write | current | This objects controls the encoding switching for POTS user ports. masterSlave, the profile entry used by the CP-IWF is the same as that selected by the CO-IWF.… |
| 1.20.5.1.1.9 | ScalarcpIwfIsdnBriPortEncodingSelectionMode | read-write | current | This objects controls the encoding switching for ISDN-BRI user ports. masterSlave, the profile entry used by the CP-IWF is the same as that selected by the CO-… |
| 1.20.5.1.1.10 | ScalarcpIwfNumDs0Bundles | read-only | current | The total number of DS0 bundles on the CP-IWF. |
| 1.20.5.1.1.11 | ScalarcpIwfLineSignaling | read-write | current | This object defines the line signal coding for CAS. It represents four parameters, by two octet (nibble per parameter Bit 7 = MSB, Bit 0 = LSB ) as follows: RI… |
| 1.20.5.1.1.28 | ScalarcpIwfNumIsdnPriPorts | read-only | current | The total number of ISDN-PRI user ports on the CP-IWF. |
| 1.20.5.1.1.29 | ScalarcpIwfIsdnPriPortEncodingSelectionMode | read-write | current | This object controls the encoding switching for ISDN PRI user ports. masterSlave - the profile entry used by the CP-IWF is the same as that selected by the CO-… |
| 1.20.5.1.2 | NodecpIwfAal2Profile | |||
| 1.20.5.1.2.1 | ScalarcpIwfAal2ApplicationIdentifier | read-write | current | This attribute describes the application identifier, which describes the type of signaling used. The value of this object should be one of those values given i… |
| 1.20.5.1.2.2 | ScalarcpIwfAal2CpsMaxMultiplexedChannels | read-write | current | Maximum number of multiplexed channels. Default value { 255 } |
| 1.20.5.1.2.3 | ScalarcpIwfAal2CpsMaxSDULength | read-write | current | Maximum CPS-SDU size given in octets. Default value { 45 } |
| 1.20.5.1.2.4 | ScalarcpIwfAal2CpsCIDLowerLimit | read-write | current | The minimum value the CID can take for AAL2 bearer channels and ISDN D Channels. Default value { 16 } |
| 1.20.5.1.2.5 | ScalarcpIwfAal2CpsCIDUpperLimit | read-write | current | The maximum value the CID can take for AAL2 bearer channels and ISDN D Channels. Default value { 255 } |
| 1.20.5.1.2.6 | ScalarcpIwfAal2CpsOptimisation | read-write | current | This object refers to the mode of operation of the CPS on the CP-IWF. The value of this object imposes a restriction on the CPS SDU length and hence must overr… |
| 1.20.5.1.2.7 | ScalarcpIwfAal2SscsFaxModulationTransport | read-write | current | This specifies whether fax demodulation is enabled or disabled. An SNMP Set to enable(2) when Fax Demodulation is not supported must result in an SNMP response… |
| 1.20.5.1.2.8 | ScalarcpIwfAal2SscsCasSignalingTransport | read-write | current | This attribute describes whether CAS signaling is transport is enabled or disabled. Default value {disabled} |
| 1.20.5.1.2.9 | ScalarcpIwfAal2SscsDtmfDigitPacketTransport | read-write | current | This attribute describes whether DTMF digit packets transport is enabled or disabled. Default value { disabled } |
| 1.20.5.1.2.10 | ScalarcpIwfAal2SscsPcmEncoding | read-write | current | This attribute describes the type of PCM encoding used. Default value { a-law } |
| 1.20.5.1.2.11 | ScalarcpIwfAal2SscsMaxSssarSduLength | read-write | current | This is the maximum size that SSSAR_SDU can take as defined in ITU - I.366.1. This parameter only applies to those AAl2 Channels using I.366.1. SSSAR. |
| 1.20.5.1.2.12 | ScalarcpIwfAal2SscsPredefinedProfileIdentifier | read-write | current | The ITU-T predefined profile: 1..255. Default value { 1} For LA-140 Agent version Greater or equal to 2.0, ATM Forum Identifier for predefined profile are used… |
| 1.20.5.1.2.13 | ScalarcpIwfAal2SscsIeeeOui | read-write | current | This attribute contains the IEEE Organizationally Unique Identifier (OUI) of the entity that specified the profile being used, if other than ITU-T. For example… |
| 1.20.5.1.3 | TablecpIwfPotsPortTable | not-accessible | current | This table contains information on the configuration of the POTS ports on the CP-IWF in addition to the information contained in the ifTable about the physical… |
| 1.20.5.1.3.1 | RowcpIwfPotsPortEntry | not-accessible | current | An entry in the cpIwfPotsPortTable that represents a single POTS port. |
| 1.20.5.1.3.1.1 | ColumncpIwfPotsPortNumber | not-accessible | current | The POTS port number. |
| 1.20.5.1.3.1.2 | ColumncpIwfPotsPortPhysicalPort | read-write | current | This has the value of the ifIndex of the ifEntry of the physical POTS port to which this CP-IWF POTS port is connected. The value of (0) has the special meanin… |
| 1.20.5.1.3.1.3 | ColumncpIwfPotsPortChannelId | read-write | current | The CID of the AAL2 connection transporting this port's traffic over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP, this… |
| 1.20.5.1.3.1.4 | ColumncpIwfPotsPortTestMode | read-write | current | The value of this object only applies if adminStatus in ifEntry is testing (3). |
| 1.20.5.1.3.1.5 | ColumncpIwfPotsPortSignalingMethod | read-write | current | The signalling method to use for this user port. Default value loopStart |
| 1.20.5.1.3.1.6 | ColumncpIwfPotsPortRxBytesPerCell | read-write | current | Selects the maximum number of payload bytes to be excepted in a cell in the receive direction. the available range is 10 to 44 Default value 44 |
| 1.20.5.1.3.1.7 | ColumncpIwfPotsPortTxBytesPerCell | read-write | current | In AAL2, the maximum number of payload bytes that can be inserted in one cell is 44. Padding bytes can be inserted to fill the cell and transmit it immediately… |
| 1.20.5.1.3.1.8 | ColumncpIwfPotsPortContCheck | read-write | current | Specifies the initial method used for a new connection to perform checks in the ATM network interface. The available selections are: off-two-way, on-source, on… |
| 1.20.5.1.3.1.9 | ColumncpIwfPotsPortStatus | read-only | current | Pots status - Free, Busy, faulty,under test |
| 1.20.5.1.4 | TablecpIwfIsdnBriPortTable | not-accessible | current | This table contains information on the configuration of the ISDN BRI ports on the CP-IWF in addition to the information contained in the ifTable about the phys… |
| 1.20.5.1.4.1 | RowcpIwfIsdnBriPortEntry | not-accessible | current | An entry in the cpIwfIsdnBriPortTable that represents a single ISDN BRI port. |
| 1.20.5.1.4.1.1 | ColumncpIwfIsdnBriPortNumber | not-accessible | current | The ISDN BRI port number. |
| 1.20.5.1.4.1.2 | ColumncpIwfIsdnBriPortPhysicalPort | read-write | current | This has the value of the ifIndex of the ifEntry of the physical ISDN BRI port to which this CP-IWF ISDN BRI port is connected. The value of (0) has the specia… |
| 1.20.5.1.4.1.3 | ColumncpIwfIsdnBriPortChannelIdD | read-write | current | The CID of the AAL2 connection transporting the D channel of this ISDN BRI port over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the presen… |
| 1.20.5.1.4.1.4 | ColumncpIwfIsdnBriPortChannelIdB1 | read-write | current | The CID of the AAL2 connection transporting the B1 channel of this ISDN BRI port over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the prese… |
| 1.20.5.1.4.1.5 | ColumncpIwfIsdnBriPortChannelIdB2 | read-write | current | The CID of the AAL2 connection transporting the B2 channel of this ISDN BRI port over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the prese… |
| 1.20.5.1.4.1.6 | ColumncpIwfIsdnBriPortRxBytesPerCell | read-write | current | Selects the maximum number of payload bytes to be excepted in a cell in the receive direction. the available range is 10 to 44 Default value 44 |
| 1.20.5.1.4.1.7 | ColumncpIwfIsdnBriPortTxBytesPerCell | read-write | current | In AAL2, the maximum number of payload bytes that can be inserted in one cell is 44. Padding bytes can be inserted to fill the cell and transmit it immediately… |
| 1.20.5.1.4.1.8 | ColumncpIwfIsdnBriPortContCheck | read-write | current | Specifies the initial method used for a new connection to perform checks in the ATM network interface. The available selections are: off-two-way, on-source, on… |
| 1.20.5.1.4.1.9 | ColumncpIwfIsdnBriPortEchoCanceler | read-write | current | Echo Cancellation activation Default value = b1-On-B2-On |
| 1.20.5.1.4.1.10 | ColumncpIwfIsdnBriPortL1Status | read-only | current | This object indicates the current state of Layer 1 of the ISDN port, according to definitions in ITU-T Recommendation I-430 11/95, paragraph 6.2 |
| 1.20.5.1.4.1.11 | ColumncpIwfIsdnBriPortDChRxPCMStatus | read-only | current | This object indicates the state of the D Rx channel of the selected port |
| 1.20.5.1.4.1.12 | ColumncpIwfIsdnBriPortB1ChRxPCMStatus | read-only | current | This object indicates the state of the B1 Rx channel of the selected port |
| 1.20.5.1.4.1.13 | ColumncpIwfIsdnBriPortB2ChRxPCMStatus | read-only | current | This object indicates the state of the B2 Rx channel of the selected port |
| 1.20.5.1.4.1.14 | ColumncpIwfIsdnBriPortDChTxPCMStatus | read-only | current | This object indicates the state of the D Tx channel of the selected port |
| 1.20.5.1.4.1.15 | ColumncpIwfIsdnBriPortB1ChTxPCMStatus | read-only | current | This object indicates the state of the B1 Tx channel of the selected port |
| 1.20.5.1.4.1.16 | ColumncpIwfIsdnBriPortB2ChTxPCMStatus | read-only | current | This object indicates the state of the B2 Tx channel of the selected port |
| 1.20.5.1.5 | TablecpIwfDs0BundleTable | not-accessible | current | This table contains information on the configuration of the DS0 Bundles on the CP-IWF in addition to the information contained in the ifTable about the physica… |
| 1.20.5.1.5.1 | RowcpIwfDs0BundleEntry | not-accessible | current | An entry in the cpIwfDs0BundleTable that represents a single DS0 Bundle. |
| 1.20.5.1.5.1.1 | ColumncpIwfDs0BundleNumber | not-accessible | current | The DS0 bundle port number. |
| 1.20.5.1.5.1.2 | ColumncpIwfDs0BundleIfIndex | read-write | current | This has the value of the ifIndex of the ifEntry of the physical DS0 bundle port to which this CP-IWF DS0 bundle port is connected. The value of (0) has the sp… |
| 1.20.5.1.5.1.3 | ColumncpIwfDs0BundleChannelId | read-write | current | The CID of the AAL2 connection transporting this DS0 bundle port over the AAL2 VCC. When the cpIwfAal2ApplicationIdentifier indicates the presence of ELCP, thi… |
| 1.20.5.1.5.1.6 | ColumncpIwfDs0BundleRxBytesPerCell | read-write | current | Selects the maximum number of payload bytes to be excepted in a cell in the receive direction. the available range is 10 to 44 Default value 44 |
| 1.20.5.1.5.1.7 | ColumncpIwfDs0BundleTxBytesPerCell | read-write | current | In AAL2, the maximum number of payload bytes that can be inserted in one cell is 44. Padding bytes can be inserted to fill the cell and transmit it immediately… |
| 1.20.5.1.5.1.8 | ColumncpIwfDs0BundleContCheck | read-write | current | Specifies the initial method used for a new connection to perform checks in the ATM network interface. The available selections are: off-two-way, on-source, on… |
| 1.20.5.1.5.1.9 | ColumncpIwfDs0BundleLineSignaling | read-write | current | This object defines the line signal coding for CAS. It represents three parameters, by two octet (nibble per parameter Bit 7 = MSB, Bit 0 = LSB ) as follows: O… |
| 1.20.5.1.6 | NodecpIwfStats | |||
| 1.20.5.1.7 | NodecpIwfAal2Stats | |||
| 1.20.5.1.7.1 | ScalarcpIwfAal2StatsCpsInPkts | read-only | current | Number of CPS packets received |
| 1.20.5.1.7.2 | ScalarcpIwfAal2StatsCpsOutPkts | read-only | current | Number of CPS packets transmitted |
| 1.20.5.1.7.3 | ScalarcpIwfAal2StatsCpsParityErrors | read-only | current | Number of CPS PDUs discarded because of incorrect parity value in the STF field. Number of errors encountered as specified in Table 6/ ITU I.363.2 (errnum = 0) |
| 1.20.5.1.7.4 | ScalarcpIwfAal2StatsCpsSeqNumErrors | read-only | current | Number of CPS PDUs received with incorrect sequence number in the STF field. Number of errors encountered as specified in Table 6/ ITU I.363.2 (errnum = 1) |
| 1.20.5.1.7.5 | ScalarcpIwfAal2StatsCpsOsfErrors | read-only | current | Number of CPS PDUs discarded because of the incorrect OSF value (>=48) in the STF field. Number of errors encountered as specified in Table 6/ ITU I.363.2 (err… |
| 1.20.5.1.7.6 | ScalarcpIwfAal2StatsCpsHecErrors | read-only | current | Number of CPS Packets received with the HEC code overlapping a CPS PDU boundary. Number of errors encountered as specified in Table 6/ ITU I.363.2 (errnum = 4) |
| 1.20.5.1.7.7 | ScalarcpIwfAal2StatsCpsUuiErrors | read-only | current | Number of CPS packets received with the incorrect UUI value (28 or 29 which are reserved for future). Number of errors encountered as specified in Table 6/ ITU… |
| 1.20.5.1.7.8 | ScalarcpIwfAal2StatsCpsCidErrors | read-only | current | Number of CPS packets received with the incorrect CID value (a CID value that is not associated with any SAP). Number of errors encountered as specified in Tab… |
| 1.20.5.1.8 | NodecpIwfV5Pstn | |||
| 1.20.5.1.8.1 | NodecpIwfV5PstnGeneral | |||
| 1.20.5.1.8.1.1 | ScalarcpIwfCallCollisionPriority | read-write | current | This indicates whether, in the case of colliding V5 PSTN ESTABLISH messages, the originating or the terminating call shall prevail. |
| 1.20.5.1.8.1.2 | ScalarcpIwfNationalProfile | read-write | current | This object indicates which country is selected. Each nationalProfile is accosiated with a country. The specific country name was not specified to allow maximu… |
| 1.20.5.1.8.1.3 | ScalarcpIwfMeterPulseFrequency | read-write | current | This is the frequency of the meter pulses generated by the CP-IWF. The allowed values are 12 kHz and 16 kHz. |
| 1.20.5.1.8.1.4 | ScalarcpIwfOffHookMinTime | read-write | current | A time period in milliseconds. The loop closed periods shorter than this are filtered out while the analog line is in on hook state. |
| 1.20.5.1.8.1.5 | ScalarcpIwfOnHookMinTime | read-write | current | A time period in milliseconds. A transition from off hook to on hook state is reported by the CP-IWF, if a loop open period longer than, or equal to, the onHoo… |
| 1.20.5.1.8.1.6 | ScalarcpIwfRegisterRecallMinTime | read-write | current | A time period in milliseconds. Register recall detection is enabled while the registerRecallMinTime is less than the onHookMinTime. If then the CP-IWF detects … |
| 1.20.5.1.8.1.7 | ScalarcpIwfDigitMinBreakPeriod | read-write | current | Minimum Break (onhook) period (in milliseconds) of digit pulse. |
| 1.20.5.1.8.1.8 | ScalarcpIwfDigitMaxBreakPeriod | read-write | current | Maximum Break (onhook) period (in milliseconds) of digit pulse. |
| 1.20.5.1.8.1.9 | ScalarcpIwfDigitMinMakePeriod | read-write | current | Minimum make (offhook) period (in milliseconds) of digit pulse. |
| 1.20.5.1.8.1.10 | ScalarcpIwfDigitMaxMakePeriod | read-write | current | Minimum make (offhook) period (in milliseconds) of digit pulse. |
| 1.20.5.1.8.1.11 | ScalarcpIwfInterDigitTime | read-write | current | period (in milliseconds) between one digit to another in a sequence of digits pulses. |
| 1.20.5.1.8.2 | TablecpIwfCadencedRingingTypeTable | not-accessible | current | This table is used to map a cadenced ringing type identifier to an actual ringing cadence. The index to the table is the value of the Cadenced-ringing type sub… |
| 1.20.5.1.8.2.1 | RowcpIwfCadencedRingingTypeEntry | not-accessible | current | An entry in the cpIwfCadencedRingingTypeTable that represents a single ringing cycle. This entry contains a list of integers that represent consecutive ON/OFF … |
| 1.20.5.1.8.2.1.1 | ColumncpIwfCadencedRingingType | not-accessible | current | Index to the cpIwfCadencedRingingTypeTable. Refer also to cpIwfNationalProfile above, which is used to select group of Cadenced-ringing types for a specific co… |
| 1.20.5.1.8.2.1.2 | ColumncpIwfCadencedRingingNumPeriods | read-create | current | Number of onPeriod/offPeriod pairs in the ringing cadence. |
| 1.20.5.1.8.2.1.3 | ColumncpIwfCadencedRingingOnPeriod1 | read-create | current | The duration of the first on period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.4 | ColumncpIwfCadencedRingingOffPeriod1 | read-create | current | The duration of the first off period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.5 | ColumncpIwfCadencedRingingOnPeriod2 | read-create | current | The duration of the second on period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.6 | ColumncpIwfCadencedRingingOffPeriod2 | read-create | current | The duration of the second off period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.7 | ColumncpIwfCadencedRingingOnPeriod3 | read-create | current | The duration of the third on period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.8 | ColumncpIwfCadencedRingingOffPeriod3 | read-create | current | The duration of the third off period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.9 | ColumncpIwfCadencedRingingOnPeriod4 | read-create | current | The duration of the fourth on period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.10 | ColumncpIwfCadencedRingingOffPeriod4 | read-create | current | The duration of the fourth off period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.11 | ColumncpIwfCadencedRingingOnPeriod5 | read-create | current | The duration of the fifth on period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.12 | ColumncpIwfCadencedRingingOffPeriod5 | read-create | current | The duration of the fifth off period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.13 | ColumncpIwfCadencedRingingOnPeriod6 | read-create | current | The duration of the sixth on period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.14 | ColumncpIwfCadencedRingingOffPeriod6 | read-create | current | The duration of the sixth off period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.15 | ColumncpIwfCadencedRingingOnPeriod7 | read-create | current | The duration of the seventh on period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.16 | ColumncpIwfCadencedRingingOffPeriod7 | read-create | current | The duration of the seventh off period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.17 | ColumncpIwfCadencedRingingOnPeriod8 | read-create | current | The duration of the eighth on period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.18 | ColumncpIwfCadencedRingingOffPeriod8 | read-create | current | The duration of the eighth off period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.19 | ColumncpIwfCadencedRingingOnPeriod9 | read-create | current | The duration of the ninth on period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.20 | ColumncpIwfCadencedRingingOffPeriod9 | read-create | current | The duration of the ninth off period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.21 | ColumncpIwfCadencedRingingOnPeriod10 | read-create | current | The duration of the tenth on period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.22 | ColumncpIwfCadencedRingingOffPeriod10 | read-create | current | The duration of the tenth off period, in milliseconds, in the ringing cycle. |
| 1.20.5.1.8.2.1.23 | ColumncpIwfCadencedRingingTypeRowStatus | read-create | current | Status of one row in this table. |
| 1.20.5.1.8.3 | TablecpIwfPulseDurationTypeTable | not-accessible | current | This table contains the mapping from a Pulse duration type identifier to the actual pulse pattern. This table is indexed by both the value of the Pulse type su… |
| 1.20.5.1.8.3.1 | RowcpIwfPulseDurationTypeEntry | not-accessible | current | An entry in the cpIwfPulseDurationTypeTable that represents a pulse pattern. This entry contains a list of integers that represent consecutive ON/OFF pulsing p… |
| 1.20.5.1.8.3.1.1 | ColumncpIwfPulseType | not-accessible | current | First index to the cpIwfPulseDurationTypeTable. |
| 1.20.5.1.8.3.1.2 | ColumncpIwfPulseDurationType | not-accessible | current | Second index to the cpIwfPulseDurationTypeTable. |
| 1.20.5.1.8.3.1.3 | ColumncpIwfPulseDurationNumPeriods | read-create | current | Number of onPeriod/offPeriod pairs in the pulse pattern. |
| 1.20.5.1.8.3.1.4 | ColumncpIwfPulseDurationOnPeriod1 | read-create | current | The duration of the first on period, in milliseconds, in the pulse pattern. |
| 1.20.5.1.8.3.1.5 | ColumncpIwfPulseDurationOffPeriod1 | read-create | current | The duration of the first off period, in milliseconds, in the pulse pattern. |
| 1.20.5.1.8.3.1.6 | ColumncpIwfPulseDurationOnPeriod2 | read-create | current | The duration of the second on period, in milliseconds, in the pulse pattern. |
| 1.20.5.1.8.3.1.7 | ColumncpIwfPulseDurationOffPeriod2 | read-create | current | The duration of the second off period, in milliseconds, in the pulse pattern. |
| 1.20.5.1.8.3.1.8 | ColumncpIwfPulseDurationOnPeriod3 | read-create | current | The duration of the third on period, in milliseconds, in the pulse pattern. |
| 1.20.5.1.8.3.1.9 | ColumncpIwfPulseDurationOffPeriod3 | read-create | current | The duration of the third off period, in milliseconds, in the pulse pattern. |
| 1.20.5.1.8.3.1.10 | ColumncpIwfPulseDurationOnPeriod4 | read-create | current | The duration of the fourth on period, in milliseconds, in the pulse pattern. |
| 1.20.5.1.8.3.1.11 | ColumncpIwfPulseDurationOffPeriod4 | read-create | current | The duration of the fourth off period, in milliseconds, in the pulse pattern. |
| 1.20.5.1.8.3.1.12 | ColumncpIwfPulseDurationOnPeriod5 | read-create | current | The duration of the fifth on period, in milliseconds, in the pulse pattern. |
| 1.20.5.1.8.3.1.13 | ColumncpIwfPulseDurationOffPeriod5 | read-create | current | The duration of the fifth off period, in milliseconds, in the pulse pattern. |
| 1.20.5.1.8.3.1.14 | ColumncpIwfPulseDurationTypeRowStatus | read-create | current | Status of one row in this table. |
| 1.20.5.1.8.4 | TablecpIwfDurationTypeTable | not-accessible | current | This table contains the mapping from the Duration type identifier to an actual period of time (in milliseconds). This table is indexed by both the value of the… |
| 1.20.5.1.8.4.1 | RowcpIwfDurationTypeEntry | not-accessible | current | An entry in the cpIwfDurationTypeTable that specifies a time interval in milliseconds. |
| 1.20.5.1.8.4.1.1 | ColumncpIwfSignal | not-accessible | current | First index to the cpIwfDurationTypeTable. |
| 1.20.5.1.8.4.1.2 | ColumncpIwfDurationType | not-accessible | current | Second index to the cpIwfDurationTypeTable. |
| 1.20.5.1.8.4.1.3 | ColumncpIwfDuration | read-create | current | A time period expressed in milliseconds. |
| 1.20.5.1.8.4.1.4 | ColumncpIwfDurationTypeRowStatus | read-create | current | Status of one row in this table. |
| 1.20.5.1.8.5 | TablecpIwfRateTypeTable | not-accessible | current | This table contains the mapping from a Rate type identifier to the actual pulse generation frequency in the CP-IWF. The index to the table is the value of the … |
| 1.20.5.1.8.5.1 | RowcpIwfRateTypeEntry | not-accessible | current | An entry in the cpIwfRateTypeTable that contains the rate at which the metering pulses are generated. The rate is expressed as pulses per hour. |
| 1.20.5.1.8.5.1.1 | ColumncpIwfRateType | not-accessible | current | Index to the cpIwfRateTypeTable. NOTE: Value zero is invalid, as [EN 300 324-1] assigns a special meaning for that. |
| 1.20.5.1.8.5.1.2 | ColumncpIwfRate | read-create | current | The rate at which CP-IWF generates pulses to the analog line, expressed as pulses per hour. |
| 1.20.5.1.8.5.1.3 | ColumncpIwfRateTypeRowStatus | read-create | current | Status of one row in this table. |
| 1.20.5.1.8.6 | TablecpIwfAttenuationValueTable | not-accessible | current | This table contains the mapping from a Attenuation value identifier, contained in the Enable-metering information element, to the actual attenuation applied by… |
| 1.20.5.1.8.6.1 | RowcpIwfAttenuationValueEntry | not-accessible | current | An entry in the cpIwfAttenuationValueTable. The attenuation is expressed as decibels. |
| 1.20.5.1.8.6.1.1 | ColumncpIwfAttenuationValue | not-accessible | current | Index to the cpIwfAttenuationValueTable. |
| 1.20.5.1.8.6.1.2 | ColumncpIwfAttenuation | read-create | current | The Rx attenuation, in decibels, (e.g neg10db= -10dB) corresponding to the value of an Attenuation value sub-element inside the Enable-metering information ele… |
| 1.20.5.1.8.6.1.3 | ColumncpIwfAttenuationValueRowStatus | read-create | current | Status of one row in this table. |
| 1.20.5.1.8.6.1.4 | ColumncpIwfTxAttenuation | read-create | current | The Tx attenuation, in decibels, (e.g neg10db= -10dB) corresponding to the value of an Attenuation value sub-element inside the Enable-metering information ele… |
| 1.20.5.1.9 | ScalarcpIwfUpstreamPhysicalBandwidth | read-write | current | This object defines the new physical bandwidth in the upstream direction of the CP-IWF. |
| 1.20.5.1.10 | ScalarcpIwfDownstreamPhysicalBandwidth | read-write | current | This object defines the new physical bandwidth in the downstream direction of the CP-IWF. |
| 1.20.5.1.13 | TablecpIwfIsdnPriPortTable | not-accessible | current | This table contains information on the configuration of the ISDN PRI ports on the CP-IWF in addition to the information contained in the ifTable about the phys… |
| 1.20.5.1.13.1 | RowcpIwfIsdnPriPortEntry | not-accessible | current | An entry in the cpIwfIsdnPriPortTable that represents a single ISDN PRI port. |
| 1.20.5.1.13.1.1 | ColumnisdnPriPortNumber | not-accessible | current | The number identifying the ISDN PRI user port on the CP-IWF. |
| 1.20.5.1.13.1.2 | ColumnisdnPriPhysicalPort | read-write | current | This has the value of the ifIndex of the ifEntry of the physical ISDN PRI port to which this CP-IWF ISDN PRI port is connected. The value of (0) has the specia… |
| 1.20.5.1.13.1.3 | ColumnisdnPriNumBChannels | read-only | current | Maximum number of B channels supported by this ISDN PRI port. |
| 1.20.5.1.13.1.4 | ColumnisdnPriDAal2ChannelId | read-write | current | The CID of the AAL2 connection transporting the D channel of this ISDN PRI port over the AAL2 VCC. The default value of this object is determined by the formul… |
| 1.20.5.1.13.1.5 | ColumnisdnPriPortLabel | read-write | current | Label assigned by service provider to identify this CP-IWF port. |
| 1.20.5.1.13.1.6 | ColumnisdnPriPortTestType | read-write | current | This object is used to specify the type of test to run for the ISDN-PRI D channel or all channels. There are no results stored locally for a loopback test. Loo… |
| 1.20.5.1.13.1.7 | ColumnisdnPriPortChannelsStatus | read-write | current | This object is used to reflect the desired state and echo canceler usage for ALL 30 ISDN PRI B Channels. The actual state of each B channel is given by isdnPri… |
| 1.20.5.1.14 | TablecpIwfIsdnPriBChannelTable | not-accessible | current | This table contains information on the configuration of the ISDN PRI B channels for each PRI port. The number of entries is given by the value of isdnPriNumBCh… |
| 1.20.5.1.14.1 | RowcpIwfIsdnPriBChannelEntry | not-accessible | current | An entry in the cpIwfIsdnPriBChannelTable that represents a single ISDN PRI B channel. |
| 1.20.5.1.14.1.1 | ColumnisdnPriBChannelNumber | not-accessible | current | The number identifying the ISDN PRI B channel on the CP-IWF. |
| 1.20.5.1.14.1.2 | ColumnisdnPriBAal2ChannelId | read-write | current | The CID of the AAL2 connection transporting this B channel over the AAL2 VCC. The default value of this object is determined by the formula defined in revision… |
| 1.20.5.1.14.1.3 | ColumnisdnPriBChannelAdminStatus | read-write | current | This object is used to reflect the desired state of the ISDN PRI B Channel. The actual state of the B channel is given by isdnPriBChannelOperStatus. When this … |
| 1.20.5.1.14.1.4 | ColumnisdnPriBChannelOperStatus | read-only | current | Provides the current operational status of the B channel. |
| 1.20.5.1.14.1.5 | ColumnisdnPriBChannelLabel | read-write | current | Label assigned by service provider to identify this B channel. For example, may be used to hold Directory Number. |
| 1.20.5.1.14.1.6 | ColumnisdnPriBChannelTestType | read-write | current | This object is used to specify the type of test to run for the ISDN-PRI B channel. There are no results stored locally for a loopback test. Loopback of the ind… |
| 1.20.5.1.14.1.7 | ColumnisdnPriBChannelEchoCanceler | read-write | current | Echo canceler activation. notApplicable - for channels with isdnPriBChannelAdminStatus = down. |
| 1.20.5.1.15 | TablecpIwfIsdnPriBChannelStatsTable | not-accessible | current | This table contains performance statistics pertinent to ISDN PRI B Channels. The number of entries is given by the value of isdnPriNumBChannels multiplied by t… |
| 1.20.5.1.15.1 | RowcpIwfIsdnPriBChannelStatsEntry | not-accessible | current | An entry in the cpIwfIsdnPriBChannelStatsTable that represents a single ISDN PRI B channel. |
| 1.20.5.1.15.1.1 | ColumncpIwfIsdnPriPortBChannelActiveSeconds | read-only | current | Total length of time the AAL2 channel associated with this port/channel has been active, in seconds. |
| 1.20.5.1.15.1.2 | ColumncpIwfIsdnPriPortBChannelFillerOctets | read-only | current | Total number of PCM filler octets injected into active media stream on this port/channel due to playout buffer underflow. |
| 1.20.5.1.15.1.3 | ColumncpIwfIsdnPriPortBChannelDroppedOctets | read-only | current | Total number of PCM payload octets dropped due to buffer overflow on this port/channel. Octets that are dropped because they arrived late, and which have alrea… |
| 1.20.5.1.15.1.4 | ColumncpIwfIsdnPriPortBChannelAal2TxCells | read-only | current | Total number of AAL2 cells transmitted by the ISDN PRI B channel indicated by isdnPriBChannelNumber. |
| 1.20.5.1.15.1.5 | ColumncpIwfIsdnPriPortBChannelAal2RxCells | read-only | current | Total number of AAL2 cells received by the ISDN PRI B channel indicated by isdnPriBChannelNumber. |
| 1.20.5.1.17 | TablecpIwfIsdnPriDChannelStatsTable | not-accessible | current | This table contains performance statistics pertinent to ISDN PRI D Channels. The number of entries is given by the number of ISDN PRI ports. |
| 1.20.5.1.17.1 | RowcpIwfIsdnPriDChannelStatsEntry | not-accessible | current | An entry in the cpIwfIsdnPriDChannelStatsTable that represents a single ISDN PRI D channel. |
| 1.20.5.1.17.1.1 | ColumncpIwfIsdnPriPortDChannelActiveSeconds | read-only | current | Total length of time the AAL2 channel associated with this port/channel has been active, in seconds. |
| 1.20.5.1.17.1.2 | ColumncpIwfIsdnPriPortDChannelFillerOctets | read-only | current | Total number of PCM filler octets injected into active media stream on this port/channel due to playout buffer underflow. |
| 1.20.5.1.17.1.3 | ColumncpIwfIsdnPriPortDChannelDroppedOctets | read-only | current | Total number of PCM payload octets dropped due to buffer overflow on this port/channel. Octets that are dropped because they arrived late, and which have alrea… |
| 1.20.5.1.17.1.4 | ColumncpIwfIsdnPriPortDChannelAal2TxCells | read-only | current | Total number of AAL2 cells transmitted by the ISDN PRI D channel indicated by isdnPriDChannelNumber. |
| 1.20.5.1.17.1.5 | ColumncpIwfIsdnPriPortDChannelAal2RxCells | read-only | current | Total number of AAL2 cells received by the ISDN PRI D channel indicated by isdnPriDChannelNumber. |
| 1.20.5.1.17.1.6 | ColumncpIwfIsdnPriPortDChannelHdlcTxCells | read-only | current | Total number of HDLC cells transmitted by the ISDN PRI D channel indicated by isdnPriDChannelNumber. |
| 1.20.5.1.17.1.7 | ColumncpIwfIsdnPriPortDChannelHdlcRxCells | read-only | current | Total number of HDLC cells received by the ISDN PRI D channel indicated by isdnPriDChannelNumber. |
| 1.20.5.1.17.1.8 | ColumncpIwfIsdnPriPortDChannelSstedTxCells | read-only | current | Total number of SSTED layer cells transmitted by the ISDN PRI D channel indicated by isdnPriDChannelNumber. |
| 1.20.5.1.17.1.9 | ColumncpIwfIsdnPriPortDChannelSstedRxCells | read-only | current | Total number of SSTED layer cells received by the ISDN PRI D channel indicated by isdnPriDChannelNumber. |
| 1.20.5.1.18 | TablecpIwfIsdnBriPortStatTable | not-accessible | current | This table contains performance statistics pertinent to ISDN BRI channel (B1/B2 or D) or port specified by ifindex |
| 1.20.5.1.18.1 | RowcpIwfIsdnBriPortStatEntry | not-accessible | current | An entry in the cpIwfIsdnBriPortStatsTable that represents statistics for a single channel of the ISDN BRI port. |
| 1.20.5.1.18.1.1 | ColumncpIwfIsdnBriPortChannel | not-accessible | current | Identify ISDN BRI specific channel (B1,B2 or D) or all port. |
| 1.20.5.1.18.1.2 | ColumncpIwfIsdnBriPortHdlcFrames | read-only | current | Total number of HDLC frames received by the D channel of the selected port. |
| 1.20.5.1.18.1.3 | ColumncpIwfIsdnBriPortHdlcErrors | read-only | current | Total number of HDLC frames received by the D channel of the selected port in which errors have been detected |
| 1.20.5.1.18.1.4 | ColumncpIwfIsdnBriPortSStedRxPacket | read-only | current | Total number of packets handled by the SSTED (Service Specific Transmission Error Detection) sublayer, used to carry the LES Embedded Operations Channel (EOC) … |
| 1.20.5.1.18.1.5 | ColumncpIwfIsdnBriPortSStedRxCRCErrors | read-only | current | Total number of LES Embedded Operations Channel (EOC) packets rejected because of CRC errors detected at the SSTED sublayer (Service Specific Transmission Erro… |
| 1.20.5.1.18.1.6 | ColumncpIwfIsdnBriPortSStedRxLenErrors | read-only | current | Total number of LES Embedded Operations Channel (EOC) packets rejected because of length errors detected at the SSTED sublayer (Service Specific Transmission E… |
| 1.20.5.1.18.1.7 | ColumncpIwfIsdnBriPortSStedRxErrors | read-only | current | Total number of LES Embedded Operations Channel (EOC) packets rejected because of other types of errors detected at the SSTED sublayer. (Service Specific Trans… |
| 1.20.5.1.18.1.8 | ColumncpIwfIsdnBriChAAL2TxCells | read-only | current | Total number of AAL2 cells transmitted by the ISDN channel indicated by cpIwfIsdnBriPortChannel |
| 1.20.5.1.18.1.9 | ColumncpIwfIsdnBriChAAL2RxCells | read-only | current | Total number of AAL2 cells in which errors occurred, transmitted by the ISDN channel indicated by cpIwfIsdnBriPortChannel. |
| 1.20.5.1.18.1.10 | ColumncpIwfIsdnBriChAAL2RxErrors | read-only | current | Total number of AAL2 cells with errors received through the ISDN channel indicated by cpIwfIsdnBriPortChannel |