CPQAPPG80-MIB
168 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232 | Nodecompaq | |||
| 1.3.6.1.4.1.232.151 | NodecpqSanAppliance | |||
| 1.3.6.1.4.1.232.151.100 | Nodecpqsmav1 | |||
| 1.3.6.1.4.1.232.151.100.1 | NodecpqSMAAgent | |||
| 1.3.6.1.4.1.232.151.100.1.1 | ScalarcpqSMAAgentVersionMajor | read-only | mandatory | The version of the agent |
| 1.3.6.1.4.1.232.151.100.1.2 | ScalarcpqSMAAgentVersionMinor | read-only | mandatory | The version of the agent |
| 1.3.6.1.4.1.232.151.100.1.3 | ScalarcpqSMAAgentActive | read-only | mandatory | The state of the agent |
| 1.3.6.1.4.1.232.151.100.1.4 | ScalarcpqSMAAgentRefreshTime | read-write | mandatory | The time interval before the next data collection. The information about the HSG80 is collected periodically. A thread gathers the information and stores it in… |
| 1.3.6.1.4.1.232.151.100.1.5 | ScalarcpqSMAAgentHostName | read-only | mandatory | The name of the local machine where the agent is running. |
| 1.3.6.1.4.1.232.151.100.2 | NodecpqSMASubsystem | |||
| 1.3.6.1.4.1.232.151.100.2.1 | TablecpqSMASubsystemTable | not-accessible | mandatory | The table of Subsystems |
| 1.3.6.1.4.1.232.151.100.2.1.1 | RowcpqSMASubsystemEntry | not-accessible | mandatory | A table entry for a Subsystem |
| 1.3.6.1.4.1.232.151.100.2.1.1.1 | ColumncpqSMASubsystemIndex | read-only | mandatory | The Subsystem index |
| 1.3.6.1.4.1.232.151.100.2.1.1.2 | ColumncpqSMASubsystemName | read-only | mandatory | The name of the Subsystem. |
| 1.3.6.1.4.1.232.151.100.2.1.1.3 | ColumncpqSMASubsystemControllerOne | read-only | mandatory | The index of controller one thats belongs to this subsytem. If the value is -1 then either the controller is not installed or not operational. |
| 1.3.6.1.4.1.232.151.100.2.1.1.4 | ColumncpqSMASubsystemControllerTwo | read-only | mandatory | The index of controller two thats belongs to this subsytem. If the value is -1 then either the controller is not installed or not operational. |
| 1.3.6.1.4.1.232.151.100.2.1.1.5 | ColumncpqSMASubsystemEMUState | read-only | mandatory | Subsystem Environmental Monitoring Unit (EMU) State. nooper(1) - EMU is either not installed or not operational. oper(2) - EMU is operational. |
| 1.3.6.1.4.1.232.151.100.2.1.1.6 | ColumncpqSMASubsystemEMUVersion | read-only | mandatory | Subsystem Environmental Monitoring Unit (EMU) Microcode verion. |
| 1.3.6.1.4.1.232.151.100.2.1.1.7 | ColumncpqSMASubsystemEMUSensor1 | read-only | mandatory | Subsystem Environmental Monitoring Unit (EMU) Sensor1 value (in Celsius). Sensor1 sets the maximum operating temperature for the primary subsystem cabinet. |
| 1.3.6.1.4.1.232.151.100.2.1.1.8 | ColumncpqSMASubsystemEMUSensor2 | read-only | mandatory | Subsystem Environmental Monitoring Unit (EMU) Sensor2 value (in Celsius). Sensor2 also sets the maximum operating temperature for the primary subsystem cabinet. |
| 1.3.6.1.4.1.232.151.100.2.1.1.9 | ColumncpqSMASubsystemEMUSensor3 | read-only | mandatory | Subsystem Environmental Monitoring Unit (EMU) Sensor3 value (in Celsius). Sensor3 sets the maximum operating temperature for the EMU unit. |
| 1.3.6.1.4.1.232.151.100.2.1.1.10 | ColumncpqSMASubsystemEMUFanspeed | read-only | mandatory | Subsystem Fanspeed. FANSPEED=HIGH forces the fans in all connected cabinets to operate at high speed continuously. FANSPEED=AUTOMATIC allows the EMU to control… |
| 1.3.6.1.4.1.232.151.100.2.1.1.11 | ColumncpqSMASubsystemEMUAlarm | read-only | mandatory | Subsystem Environmental Monitoring Unit Alarm. Determines whether or not the audible alarm of the EMU will sound in the following cases: drive failure controll… |
| 1.3.6.1.4.1.232.151.100.2.1.1.12 | ColumncpqSMASubsystemState | read-only | mandatory | Gives us the overall state of the HSG80 subsystem. |
| 1.3.6.1.4.1.232.151.100.2.1.1.13 | ColumncpqSMASubsystemAlias | read-only | mandatory | The Subsystem Alias. |
| 1.3.6.1.4.1.232.151.100.3 | NodecpqSMAController | |||
| 1.3.6.1.4.1.232.151.100.3.1 | TablecpqSMAControllerTable | not-accessible | mandatory | The table of controllers |
| 1.3.6.1.4.1.232.151.100.3.1.1 | RowcpqSMAControllerEntry | not-accessible | mandatory | A table entry for a controller |
| 1.3.6.1.4.1.232.151.100.3.1.1.1 | ColumncpqSMAControllerIndex | read-only | mandatory | The controller index |
| 1.3.6.1.4.1.232.151.100.3.1.1.2 | ColumncpqSMAControllerName | read-only | mandatory | The name of the controller. |
| 1.3.6.1.4.1.232.151.100.3.1.1.3 | ColumncpqSMAControllerSerialNumber | read-only | mandatory | The serial number of the controller. |
| 1.3.6.1.4.1.232.151.100.3.1.1.4 | ColumncpqSMAControllerFirmware | read-only | mandatory | The firmware of the controller. |
| 1.3.6.1.4.1.232.151.100.3.1.1.5 | ColumncpqSMAControllerHardware | read-only | mandatory | The hardware revision of the controller. |
| 1.3.6.1.4.1.232.151.100.3.1.1.6 | ColumncpqSMAControllerNodeID | read-only | mandatory | Manufacturer assigned ID of the controller. |
| 1.3.6.1.4.1.232.151.100.3.1.1.7 | ColumncpqSMAControllerIdentifier | read-only | mandatory | The user assigned identifier if any of the controller. |
| 1.3.6.1.4.1.232.151.100.3.1.1.8 | ColumncpqSMAControllerAllocationClass | read-only | mandatory | The controller allocation class |
| 1.3.6.1.4.1.232.151.100.3.1.1.9 | ColumncpqSMAControllerScsiVersion | read-only | mandatory | The scsi version of the controller |
| 1.3.6.1.4.1.232.151.100.3.1.1.10 | ColumncpqSMAControllerRedundancy | read-only | mandatory | The redundancy type of the controller |
| 1.3.6.1.4.1.232.151.100.3.1.1.11 | ColumncpqSMAControllerScsiID | read-only | mandatory | The device port scsi address of the controller |
| 1.3.6.1.4.1.232.151.100.3.1.1.12 | ColumncpqSMAControllerCacheSize | read-only | mandatory | The cache size in megabytes. Can be either 64, 128, 256 or 512 MB. |
| 1.3.6.1.4.1.232.151.100.3.1.1.13 | ColumncpqSMAControllerCacheType | read-only | mandatory | The cache type of this controller |
| 1.3.6.1.4.1.232.151.100.3.1.1.14 | ColumncpqSMAControllerCacheVersion | read-only | mandatory | The version of this controllers cache. |
| 1.3.6.1.4.1.232.151.100.3.1.1.15 | ColumncpqSMAControllerCacheFlushTimer | read-only | mandatory | The cache flush timer in sec |
| 1.3.6.1.4.1.232.151.100.3.1.1.16 | ColumncpqSMAControllerMirrorCache | read-only | mandatory | The mirror cache state of this controller |
| 1.3.6.1.4.1.232.151.100.3.1.1.17 | ColumncpqSMAControllerPort_1_ID | read-only | mandatory | The ID of port 1. |
| 1.3.6.1.4.1.232.151.100.3.1.1.18 | ColumncpqSMAControllerPort_1_Topology | read-only | mandatory | The topology of this controller |
| 1.3.6.1.4.1.232.151.100.3.1.1.19 | ColumncpqSMAControllerPort_1_State | read-only | mandatory | The state of this port |
| 1.3.6.1.4.1.232.151.100.3.1.1.20 | ColumncpqSMAControllerPort_2_ID | read-only | mandatory | The ID of port 2. |
| 1.3.6.1.4.1.232.151.100.3.1.1.21 | ColumncpqSMAControllerPort_2_Topology | read-only | mandatory | The topology of this controller |
| 1.3.6.1.4.1.232.151.100.3.1.1.22 | ColumncpqSMAControllerPort_2_State | read-only | mandatory | The state of this port |
| 1.3.6.1.4.1.232.151.100.3.1.1.23 | ColumncpqSMAControllerPairIndex | read-only | mandatory | The index of this controller's pair if FAILOVER mode (cpqSMAControllerRedundancy) is mutlibus or transparent. If there is no FAILOVER mode (cpqSMAControllerRed… |
| 1.3.6.1.4.1.232.151.100.3.1.1.24 | ColumncpqSMAControllerCacheState | read-only | mandatory | The state of the controller cache. |
| 1.3.6.1.4.1.232.151.100.3.1.1.25 | ColumncpqSMAControllerBatteryCheckState | read-only | mandatory | Battery check state. Specifies whether the controller should perform regular battery condition checks. If CACHE_UPS (ups) the controller does not check the con… |
| 1.3.6.1.4.1.232.151.100.3.1.1.26 | ColumncpqSMAControllerBatteryChargeState | read-only | mandatory | This is the value in % (percentage) of the amount the controller battery is charged. A value of 0 (zero) means DANGER: BATTERY LIFETIME HAS EXPIRED, REPLACE BA… |
| 1.3.6.1.4.1.232.151.100.3.1.1.27 | ColumncpqSMAControllerBatteryExpiryDate | read-only | mandatory | The expiry date of the controller battery. |
| 1.3.6.1.4.1.232.151.100.3.1.1.28 | ColumncpqSMAControllerSubsystemIndex | read-only | mandatory | The index of the subsystem to which this controller belongs. |
| 1.3.6.1.4.1.232.151.100.3.1.1.29 | ColumncpqSMAControllerPort_1_Address | read-only | mandatory | The Host_Port1 Address. |
| 1.3.6.1.4.1.232.151.100.3.1.1.30 | ColumncpqSMAControllerPort_2_Address | read-only | mandatory | The Host_Port2 Address. |
| 1.3.6.1.4.1.232.151.100.3.1.1.31 | ColumncpqSMAControllerLogicalDiskIndexes | read-only | mandatory | The indexes of all the logical disks associated with the controller. Each index is seperated by a ':' . |
| 1.3.6.1.4.1.232.151.100.3.1.1.32 | ColumncpqSMAControllerSnapshotIndexes | read-only | mandatory | The indexes of all the snapshots associated with the controller. Each index is seperated by a ':' . |
| 1.3.6.1.4.1.232.151.100.4 | NodecpqSMALogicalDisk | |||
| 1.3.6.1.4.1.232.151.100.4.1 | TablecpqSMALogicalDiskTable | not-accessible | mandatory | The table of LogicalDisks |
| 1.3.6.1.4.1.232.151.100.4.1.1 | RowcpqSMALogicalDiskEntry | not-accessible | mandatory | A table entry for a LogicalDisk |
| 1.3.6.1.4.1.232.151.100.4.1.1.1 | ColumncpqSMALogicalDiskIndex | read-only | mandatory | The LogicalDisk index. This is just a ordered sequence done by the agent, has no relationship to the unit offset or unit name/number. |
| 1.3.6.1.4.1.232.151.100.4.1.1.2 | ColumncpqSMALogicalDiskName | read-only | mandatory | The name of the LogicalDisk. |
| 1.3.6.1.4.1.232.151.100.4.1.1.3 | ColumncpqSMALogicalDiskSize | read-only | mandatory | Logical Drive Size. This is the size of the logical drive in blocks. One block equals 512 bytes (1 block = 512 bytes). |
| 1.3.6.1.4.1.232.151.100.4.1.1.4 | ColumncpqSMALogicalDiskCreatedFromIndex | read-only | mandatory | Logical Drive Created From Instance. This gives us the instance of the storageset or physical disk from which this LUN was created. |
| 1.3.6.1.4.1.232.151.100.4.1.1.5 | ColumncpqSMALogicalDiskReadCache | read-only | mandatory | Logical Drive Read Cache. The state of the read cache for the associated logical drives. |
| 1.3.6.1.4.1.232.151.100.4.1.1.6 | ColumncpqSMALogicalDiskWriteBackCache | read-only | mandatory | Logical Drive WriteBack Cache. The state of the writeback cache for the associated logical drives. |
| 1.3.6.1.4.1.232.151.100.4.1.1.7 | ColumncpqSMALogicalDiskWriteProtectCache | read-only | mandatory | Logical Drive WriteProtect Cache. The state of the write protect cache for the associated logical drives. |
| 1.3.6.1.4.1.232.151.100.4.1.1.8 | ColumncpqSMALogicalDiskReadAheadCache | read-only | mandatory | Logical Drive ReadAhead Cache. The state of the readahead cache for the associated logical drives. |
| 1.3.6.1.4.1.232.151.100.4.1.1.9 | ColumncpqSMALogicalDiskRunState | read-only | mandatory | Logical Drive Run State. The run state for the associated logical drives. you specify RUN to make a unit available to the host. |
| 1.3.6.1.4.1.232.151.100.4.1.1.10 | ColumncpqSMALogicalDiskState | read-only | mandatory | Logical Drive State. The state of the associated logical drive. |
| 1.3.6.1.4.1.232.151.100.4.1.1.11 | ColumncpqSMALogicalDiskCachedTransferSize | read-only | mandatory | Logical Drive CachedTransferSize. The largest number of write blocks to be cached by the controller. The controller will not cache any transfers over the speci… |
| 1.3.6.1.4.1.232.151.100.4.1.1.12 | ColumncpqSMALogicalDiskPreferredPath | read-only | mandatory | Logical Drive PreferredPath. May be set only when dual redundant controllers are operating in a multiple-bus failover configuration. |
| 1.3.6.1.4.1.232.151.100.4.1.1.13 | ColumncpqSMALogicalDiskHostAccess | read-only | mandatory | Logical Drive Host Access. Specifies the access path. |
| 1.3.6.1.4.1.232.151.100.4.1.1.14 | ColumncpqSMALogicalDiskIdentifier | read-only | mandatory | Logical Drive ID (Lun_ID) This ID consists of the controller node ID plus a 64-bit unit ID generated by the subsystem. |
| 1.3.6.1.4.1.232.151.100.4.1.1.15 | ColumncpqSMALogicalDiskHeads | read-only | mandatory | Number of Heads. |
| 1.3.6.1.4.1.232.151.100.4.1.1.16 | ColumncpqSMALogicalDiskCylinders | read-only | mandatory | Number of Cylinders. |
| 1.3.6.1.4.1.232.151.100.4.1.1.17 | ColumncpqSMALogicalDiskSectors | read-only | mandatory | Number of Sectors. |
| 1.3.6.1.4.1.232.151.100.4.1.1.18 | ColumncpqSMALogicalDiskControllerInstance | read-only | mandatory | Logical Drive Controller Instance. This gives us the instance of the controller to which this LUN is online. |
| 1.3.6.1.4.1.232.151.100.4.1.1.19 | ColumncpqSMALogicalDiskCreatedFromType | read-only | mandatory | Logical Drive Created from type. Tells us whether the LUN was created from an entire physical disk, entire storageset or from a partition(logical or physical).… |
| 1.3.6.1.4.1.232.151.100.4.1.1.20 | ColumncpqSMALogicalDiskIdentifierSwitch | read-only | mandatory | Logical Drive Identifier switch. This is used with the SCSI_VERSION switch when the SCSI version is set to SCSI-3 mode. The IDENTIFIER switch creates a unique … |
| 1.3.6.1.4.1.232.151.100.4.1.1.21 | ColumncpqSMALogicalDiskSnapped | read-only | mandatory | Logical Drive Snapped. This tells us if a snapshot of this disk exists. |
| 1.3.6.1.4.1.232.151.100.4.1.1.22 | ColumncpqSMALogicalDiskSnapshotInstance | read-only | mandatory | Logical Drive Snapshot instance. If the disk has a snapshot ie. cpqSMALogicalDiskSnapped is yes, then this gives us the instance of the snapshot else -1. |
| 1.3.6.1.4.1.232.151.100.4.1.1.23 | ColumncpqSMALogicalDiskSubsystemIndex | read-only | mandatory | The index of the subsystem where this logical disk resides. |
| 1.3.6.1.4.1.232.151.100.5 | NodecpqSMAPhysicalDisk | |||
| 1.3.6.1.4.1.232.151.100.5.1 | TablecpqSMAPhysicalDiskTable | not-accessible | mandatory | The table of PhysicalDisks |
| 1.3.6.1.4.1.232.151.100.5.1.1 | RowcpqSMAPhysicalDiskEntry | not-accessible | mandatory | A table entry for a PhysicalDisk |
| 1.3.6.1.4.1.232.151.100.5.1.1.1 | ColumncpqSMAPhysicalDiskIndex | read-only | mandatory | The PhysicalDisk index |
| 1.3.6.1.4.1.232.151.100.5.1.1.2 | ColumncpqSMAPhysicalDiskName | read-only | mandatory | The name of the PhysicalDisk. |
| 1.3.6.1.4.1.232.151.100.5.1.1.3 | ColumncpqSMAPhysicalDiskModel | read-only | mandatory | The model of the PhysicalDisk. |
| 1.3.6.1.4.1.232.151.100.5.1.1.4 | ColumncpqSMAPhysicalDiskPort | read-only | mandatory | The PhysicalDisk Port |
| 1.3.6.1.4.1.232.151.100.5.1.1.5 | ColumncpqSMAPhysicalDiskTarget | read-only | mandatory | The PhysicalDisk target |
| 1.3.6.1.4.1.232.151.100.5.1.1.6 | ColumncpqSMAPhysicalDiskLun | read-only | mandatory | The PhysicalDisk LUN |
| 1.3.6.1.4.1.232.151.100.5.1.1.7 | ColumncpqSMAPhysicalDiskSize | read-only | mandatory | Physical Disk Size. This is the size of the physical disk in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufact… |
| 1.3.6.1.4.1.232.151.100.5.1.1.8 | ColumncpqSMAPhysicalDiskTransportable | read-only | mandatory | PhysicalDisk Transportable. Indicates whether a disk drive can be accessed exclusively by StorageWorks. |
| 1.3.6.1.4.1.232.151.100.5.1.1.9 | ColumncpqSMAPhysicalDiskTransferRate | read-only | mandatory | PhysicalDisk Transportable. Indicates whether a disk drive can be accessed exclusively by StorageWorks. |
| 1.3.6.1.4.1.232.151.100.5.1.1.10 | ColumncpqSMAPhysicalDiskState | read-only | mandatory | PhysicalDisk State. Indicates whether a disk drive has been assigend to a storageset, lun or not. |
| 1.3.6.1.4.1.232.151.100.5.1.1.11 | ColumncpqSMAPhysicalDiskUsedByIndex | read-only | mandatory | PhysicalDisk Used by index. This is the index of the lun or storageset that was created by using this physical disk. If the disk is unassigned or free ie. cpqS… |
| 1.3.6.1.4.1.232.151.100.5.1.1.12 | ColumncpqSMAPhysicalDiskNoofPartitions | read-only | mandatory | The number of partitions on this PhysicalDisk. |
| 1.3.6.1.4.1.232.151.100.5.1.1.13 | ColumncpqSMAPhysicalDiskUsedByType | read-only | mandatory | PhysicalDisk UsedByType. If this disk has been assigned ie. cpqSMAPhysicalDiskState = 2, then this indicates the type of object that was created using this dis… |
| 1.3.6.1.4.1.232.151.100.5.1.1.14 | ColumncpqSMAPhysicalDiskSubsystemIndex | read-only | mandatory | The index of the subsystem where this physical disk resides. |
| 1.3.6.1.4.1.232.151.100.6 | NodecpqSMAStorageSet | |||
| 1.3.6.1.4.1.232.151.100.6.1 | TablecpqSMAStorageSetTable | not-accessible | mandatory | The table of StorageSets |
| 1.3.6.1.4.1.232.151.100.6.1.1 | RowcpqSMAStorageSetEntry | not-accessible | mandatory | A table entry for a StorageSet |
| 1.3.6.1.4.1.232.151.100.6.1.1.1 | ColumncpqSMAStorageSetIndex | read-only | mandatory | The StorageSet index |
| 1.3.6.1.4.1.232.151.100.6.1.1.2 | ColumncpqSMAStorageSetName | read-only | mandatory | The name of the StorageSet. |
| 1.3.6.1.4.1.232.151.100.6.1.1.3 | ColumncpqSMAStorageSetRaidType | read-only | mandatory | The StorageSet Raid Type |
| 1.3.6.1.4.1.232.151.100.6.1.1.4 | ColumncpqSMAStorageSetSize | read-only | mandatory | Storageset Size. This is the size of the storagset disk in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufactur… |
| 1.3.6.1.4.1.232.151.100.6.1.1.5 | ColumncpqSMAStorageSetPolicy | read-only | mandatory | The StorageSet Policy switch. Sets the selection criteria the contoller uses to choose a replacement disk from the spareset. This policy only pertains to MIRRO… |
| 1.3.6.1.4.1.232.151.100.6.1.1.6 | ColumncpqSMAStorageSetReconstruct | read-only | mandatory | The StorageSet Reconstruct switch. Sets the speed at which the contoller reconstructs data ti a new RAIDset disk that replaces the failed disk. This policy onl… |
| 1.3.6.1.4.1.232.151.100.6.1.1.7 | ColumncpqSMAStorageSetCopy | read-only | mandatory | The StorageSet Copy switch. Sets the speed at which the controller copies data to a new member from normal mirrorset members when data is being mirrored to the… |
| 1.3.6.1.4.1.232.151.100.6.1.1.8 | ColumncpqSMAStorageSetReadSource | read-only | mandatory | The Storageset ReadSource switch. Selects the mirrorset member used by the controller to satisfy a read request. The values will be either - disk-name (name of… |
| 1.3.6.1.4.1.232.151.100.6.1.1.9 | ColumncpqSMAStorageSetAutospare | read-only | mandatory | The StorageSet Autospare switch. With autospare enabled on a failedset, any new disk drive that is inserted into the PTL location of a failed dusk drive is aut… |
| 1.3.6.1.4.1.232.151.100.6.1.1.10 | ColumncpqSMAStorageSetChunkSize | read-only | mandatory | The StorageSet ChunkSize switch. Specify a chunk size to control the stripesize used for RAIDsets and stripesets in blocks. This policy only pertains to RAIDSE… |
| 1.3.6.1.4.1.232.151.100.6.1.1.11 | ColumncpqSMAStorageSetNoOfDisks | read-only | mandatory | The number of the physical disks that was used to create this StorageSet. |
| 1.3.6.1.4.1.232.151.100.6.1.1.12 | ColumncpqSMAStorageSetDisksIndex | read-only | mandatory | The indexes of the physical disks from which this StorageSet was created. Each index is seperated by a ':' . |
| 1.3.6.1.4.1.232.151.100.6.1.1.13 | ColumncpqSMAStorageSetState | read-only | mandatory | Storageset State. Indicates whether a lun has been created from the storageset. |
| 1.3.6.1.4.1.232.151.100.6.1.1.14 | ColumncpqSMAStorageSetUsedByIndex | read-only | mandatory | Storageset Used by index. This is the index of the lun or snapshot that was created from this storageset. If the storageset is unassigned or free ie. cpqSMASto… |
| 1.3.6.1.4.1.232.151.100.6.1.1.15 | ColumncpqSMAStorageSetNoofPartitions | read-only | mandatory | The number of partitions on this Storageset. |
| 1.3.6.1.4.1.232.151.100.6.1.1.16 | ColumncpqSMAStorageSetSubsystemIndex | read-only | mandatory | The index of the subsystem where this storageset resides. |
| 1.3.6.1.4.1.232.151.100.6.1.1.17 | ColumncpqSMAStorageSetUsedByType | read-only | mandatory | Storageset Used by index. This tells us whether the type of disk created from this storageset is a lun or a snapshot. ie. if cpqSMAStorageSetState = 2 (assigne… |
| 1.3.6.1.4.1.232.151.100.7 | NodecpqSMAPartition | |||
| 1.3.6.1.4.1.232.151.100.7.1 | TablecpqSMAPartitionTable | not-accessible | mandatory | The table of Partitions |
| 1.3.6.1.4.1.232.151.100.7.1.1 | RowcpqSMAPartitionEntry | not-accessible | mandatory | A table entry for a Partition |
| 1.3.6.1.4.1.232.151.100.7.1.1.1 | ColumncpqSMAPartitionIndex | read-only | mandatory | The Partition index |
| 1.3.6.1.4.1.232.151.100.7.1.1.2 | ColumncpqSMAPartitionName | read-only | mandatory | The name of the Partition. |
| 1.3.6.1.4.1.232.151.100.7.1.1.3 | ColumncpqSMAPartitionNumber | read-only | mandatory | The Partition number |
| 1.3.6.1.4.1.232.151.100.7.1.1.4 | ColumncpqSMAPartitionDeviceIndex | read-only | mandatory | The Partition Device Index. This is the index of the device (physical) or storageset (logical) from which this partition was created. |
| 1.3.6.1.4.1.232.151.100.7.1.1.5 | ColumncpqSMAPartitionState | read-only | mandatory | The Partition number |
| 1.3.6.1.4.1.232.151.100.7.1.1.6 | ColumncpqSMAPartitionUsedByIndex | read-only | mandatory | The Partition Used By Index. This is the index of the lun that was created from this partition. If the parition is unassigned or free ie. cpqSMAPartitionDevice… |
| 1.3.6.1.4.1.232.151.100.7.1.1.7 | ColumncpqSMAPartitionSize | read-only | mandatory | Partition Size. This is the size of the partition in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers so… |
| 1.3.6.1.4.1.232.151.100.7.1.1.8 | ColumncpqSMAPartitionType | read-only | mandatory | The type of Partition. If its a partition created from a device(disk) its a physical partition if its created from a storageset then its a logical partition. |
| 1.3.6.1.4.1.232.151.100.7.1.1.9 | ColumncpqSMAPartitionSubsystemIndex | read-only | mandatory | The index of the subsystem where this partition resides. |
| 1.3.6.1.4.1.232.151.100.8 | NodecpqSMAConnection | |||
| 1.3.6.1.4.1.232.151.100.8.1 | TablecpqSMAConnectionTable | not-accessible | mandatory | The table of Connections |
| 1.3.6.1.4.1.232.151.100.8.1.1 | RowcpqSMAConnectionEntry | not-accessible | mandatory | A table entry for a Connection |
| 1.3.6.1.4.1.232.151.100.8.1.1.1 | ColumncpqSMAConnectionIndex | read-only | mandatory | The Connection index |
| 1.3.6.1.4.1.232.151.100.8.1.1.2 | ColumncpqSMAConnectionName | read-only | mandatory | The name of the Connection. |
| 1.3.6.1.4.1.232.151.100.8.1.1.3 | ColumncpqSMAConnectionOSName | read-only | mandatory | The Operating System name. |
| 1.3.6.1.4.1.232.151.100.8.1.1.4 | ColumncpqSMAConnectionController | read-only | mandatory | The instance of the controller to which there is a connection. |
| 1.3.6.1.4.1.232.151.100.8.1.1.5 | ColumncpqSMAConnectionControllerPortNumber | read-only | mandatory | The port number on the controller to which there is a connection. |
| 1.3.6.1.4.1.232.151.100.8.1.1.6 | ColumncpqSMAConnectionStatus | read-only | mandatory | The status of connection. |
| 1.3.6.1.4.1.232.151.100.8.1.1.7 | ColumncpqSMAConnectionOnlineTo | read-only | mandatory | The instance of the controller to which it is online. |
| 1.3.6.1.4.1.232.151.100.8.1.1.8 | ColumncpqSMAConnectionLunOffset | read-only | mandatory | The LUN offset for this connection. |
| 1.3.6.1.4.1.232.151.100.8.1.1.9 | ColumncpqSMAConnectionHostID | read-only | mandatory | The HOST ID. |
| 1.3.6.1.4.1.232.151.100.8.1.1.10 | ColumncpqSMAConnectionAdapterID | read-only | mandatory | The Adapter ID. |
| 1.3.6.1.4.1.232.151.100.8.1.1.11 | ColumncpqSMAConnectionUnitAddress | read-only | mandatory | The Unit Address. |
| 1.3.6.1.4.1.232.151.100.8.1.1.12 | ColumncpqSMAConnectionSubsystemIndex | read-only | mandatory | The index of the subsystem where this connection exists. |
| 1.3.6.1.4.1.232.151.100.9 | NodecpqSMASnapshot | |||
| 1.3.6.1.4.1.232.151.100.9.1 | TablecpqSMASnapshotTable | not-accessible | mandatory | The table of Snapshots |
| 1.3.6.1.4.1.232.151.100.9.1.1 | RowcpqSMASnapshotEntry | not-accessible | mandatory | A table entry for a Snapshot |
| 1.3.6.1.4.1.232.151.100.9.1.1.1 | ColumncpqSMASnapshotIndex | read-only | mandatory | The Snapshot index |
| 1.3.6.1.4.1.232.151.100.9.1.1.2 | ColumncpqSMASnapshotName | read-only | mandatory | The name of the Snapshot. |
| 1.3.6.1.4.1.232.151.100.9.1.1.3 | ColumncpqSMASnapshotSize | read-only | mandatory | Snapshot Drive Size. This is the size of the snapshot in blocks. One block equals 512 bytes (1 block = 512 bytes). |
| 1.3.6.1.4.1.232.151.100.9.1.1.4 | ColumncpqSMASnapshotCreatedFromIndex | read-only | mandatory | Snapshot Created From Instance. This gives us the instance of the storageset from which this snapshot was created. |
| 1.3.6.1.4.1.232.151.100.9.1.1.5 | ColumncpqSMASnapshotOf | read-only | mandatory | This is the instance of the logical disk for which this is a snapshot. |
| 1.3.6.1.4.1.232.151.100.9.1.1.6 | ColumncpqSMASnapshotState | read-only | mandatory | Snapshot State. The state of the snapshot. |
| 1.3.6.1.4.1.232.151.100.9.1.1.7 | ColumncpqSMASnapshotPreferredPath | read-only | mandatory | Snapshot PreferredPath. May be set only when dual redundant controllers are operating in a multiple-bus failover configuration. |
| 1.3.6.1.4.1.232.151.100.9.1.1.8 | ColumncpqSMASnapshotHostAccess | read-only | mandatory | Snapshot Host Access. Specifies the access path. |
| 1.3.6.1.4.1.232.151.100.9.1.1.9 | ColumncpqSMASnapshotIdentifier | read-only | mandatory | Snapshot ID This ID consists of the controller node ID plus a 64-bit unit ID generated by the subsystem. |
| 1.3.6.1.4.1.232.151.100.9.1.1.10 | ColumncpqSMASnapshotHeads | read-only | mandatory | Number of Heads. |
| 1.3.6.1.4.1.232.151.100.9.1.1.11 | ColumncpqSMASnapshotCylinders | read-only | mandatory | Number of Cylinders. |
| 1.3.6.1.4.1.232.151.100.9.1.1.12 | ColumncpqSMASnapshotSectors | read-only | mandatory | Number of Sectors. |
| 1.3.6.1.4.1.232.151.100.9.1.1.13 | ColumncpqSMASnapshotControllerInstance | read-only | mandatory | Snapshot Controller Instance. This gives us the instance of the controller to which this snapshot is online. |
| 1.3.6.1.4.1.232.151.100.9.1.1.14 | ColumncpqSMASnapshotIdentifierSwitch | read-only | mandatory | Snapshot Identifier switch. This is used with the SCSI_VERSION switch when the SCSI version is set to SCSI-3 mode. The IDENTIFIER switch creates a unique unit … |
| 1.3.6.1.4.1.232.151.100.9.1.1.15 | ColumncpqSMASnapshotSubsystemIndex | read-only | mandatory | The index of the subsystem where this snapshot resides. |