CPQIDA-MIB
513 objects
No module-level DESCRIPTION found.
Imported Objects
| CPQHOST-MIB | compaq cpqHoTrapFlags |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | -- enterprises Counter Gauge |
| RFC1213-MIB | DisplayString sysName |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.3 | NodecpqDriveArray | |||
| 1.3.6.1.4.1.232.3.1 | NodecpqDaLogDrvStatusChange | Logical Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array logical drive. The variable cpqDaLogDrvSta… | ||
| 1.3.6.1.4.1.232.3.1 | NodecpqDaMibRev | |||
| 1.3.6.1.4.1.232.3.1.1 | ScalarcpqDaMibRevMajor | read-only | mandatory | The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level m… |
| 1.3.6.1.4.1.232.3.1.2 | ScalarcpqDaMibRevMinor | read-only | mandatory | The Minor Revision level. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occu… |
| 1.3.6.1.4.1.232.3.1.3 | ScalarcpqDaMibCondition | read-only | mandatory | The overall condition (status) of the system represented by this MIB. |
| 1.3.6.1.4.1.232.3.2 | NodecpqDaComponent | |||
| 1.3.6.1.4.1.232.3.2 | NodecpqDaSpareStatusChange | Spare Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array spare drive. The variable cpqDaSpareStatus i… | ||
| 1.3.6.1.4.1.232.3.2.1 | NodecpqDaInterface | |||
| 1.3.6.1.4.1.232.3.2.1.1 | NodecpqDaOsNetWare3x | |||
| 1.3.6.1.4.1.232.3.2.1.1.1 | ScalarcpqDaNw3xDriverName | read-only | deprecated | Array Controller Driver Interface Name. This is the name of the device driver for the Array Controllers. |
| 1.3.6.1.4.1.232.3.2.1.1.2 | ScalarcpqDaNw3xDriverVer | read-only | deprecated | Array Controller Driver Interface Version. This is the version number of the device driver for the Array Controllers. |
| 1.3.6.1.4.1.232.3.2.1.1.3 | ScalarcpqDaNw3xPollType | read-only | deprecated | Array Controller Driver Interface Poll Type. The Insight Agent collects information from the device driver in two ways: Polled (2) Indicates that the informati… |
| 1.3.6.1.4.1.232.3.2.1.1.4 | ScalarcpqDaNw3xPollTime | read-only | deprecated | Array Controller Driver Interface Poll Time. If the Poll Type is Polled, this value shows how frequently, in seconds, the instrument agent requests Information… |
| 1.3.6.1.4.1.232.3.2.1.1.5 | TablecpqDaNw3xDriverStatTable | not-accessible | deprecated | Array Controller Driver Statistics Table. This is a table of logical drive statistics which are gathered by the device driver. |
| 1.3.6.1.4.1.232.3.2.1.1.5.1 | RowcpqDaNw3xDriverStatEntry | not-accessible | deprecated | Array Controller Driver Statistics Table Entry. One entry in the driver statistics table. Each entry represents a logical drive for which the statistics are ke… |
| 1.3.6.1.4.1.232.3.2.1.1.5.1.1 | ColumncpqDaNw3xCntlrIndex | read-only | deprecated | Array Controller Index. This maps the logical drives into their respective controllers. This controller index matches the controller group entries. |
| 1.3.6.1.4.1.232.3.2.1.1.5.1.2 | ColumncpqDaNw3xLogDrvIndex | read-only | deprecated | Array Logical Drive Index. This is the logical drive number which keeps track of multiple instances of logical drives which are on the same controller. For eac… |
| 1.3.6.1.4.1.232.3.2.1.1.5.1.3 | ColumncpqDaNw3xTotalReads | read-only | deprecated | Array Logical Drive Total Reads. This shows the total number of reads performed by the IDA device driver to this logical drive. This number is reset each time … |
| 1.3.6.1.4.1.232.3.2.1.1.5.1.4 | ColumncpqDaNw3xTotalWrites | read-only | deprecated | Array Logical Drive Total Writes. This shows the total number of writes performed by the IDA device driver to this logical drive. This number is reset each tim… |
| 1.3.6.1.4.1.232.3.2.1.1.5.1.5 | ColumncpqDaNw3xCorrReads | read-only | deprecated | Array Logical Drive Corrected Reads. This is the total number of read commands sent to the specified logical drive which had to be corrected by fault tolerance… |
| 1.3.6.1.4.1.232.3.2.1.1.5.1.6 | ColumncpqDaNw3xCorrWrites | read-only | deprecated | Array Logical Drive Corrected Writes. This is the total number of write commands sent to the specified logical drive which had to be corrected by fault toleran… |
| 1.3.6.1.4.1.232.3.2.1.1.5.1.7 | ColumncpqDaNw3xFatalReads | read-only | deprecated | Array Logical Drive Fatal Reads. This is the total number of read commands sent to the specified logical drive which failed. This number is reset each time the… |
| 1.3.6.1.4.1.232.3.2.1.1.5.1.8 | ColumncpqDaNw3xFatalWrites | read-only | deprecated | Array Logical Drive Fatal Writes. This is the total number of write commands sent to the specified logical drive which failed. This number is reset each time t… |
| 1.3.6.1.4.1.232.3.2.1.1.6 | TablecpqDaNw3xVolMapTable | not-accessible | deprecated | Volume Map Table. This is a table of NetWare volumes which map into the logical drives |
| 1.3.6.1.4.1.232.3.2.1.1.6.1 | RowcpqDaNw3xVolMapEntry | not-accessible | deprecated | Volume Map Table Entry. One entry in the volume map table. Each entry represents a logical drive for which the volume map is kept. |
| 1.3.6.1.4.1.232.3.2.1.1.6.1.1 | ColumncpqDaNw3xVolCntlrIndex | read-only | deprecated | Array Controller Index. This maps the logical drives into their respective controllers. This controller index matches the controller group entries. |
| 1.3.6.1.4.1.232.3.2.1.1.6.1.2 | ColumncpqDaNw3xVolLogDrvIndex | read-only | deprecated | Array Logical Drive Index. This is the logical drive number which keeps track of multiple instances of logical drives which are on the same controller. For eac… |
| 1.3.6.1.4.1.232.3.2.1.1.6.1.3 | ColumncpqDaNw3xVolMap | read-only | deprecated | NetWare Volume Map. This is a data structure containing the volume mappings for this logical drive. There are 8 entries in a volume mapping. Each entry has the… |
| 1.3.6.1.4.1.232.3.2.1.4 | NodecpqDaOsCommon | |||
| 1.3.6.1.4.1.232.3.2.1.4.1 | ScalarcpqDaOsCommonPollFreq | read-write | mandatory | The Insight Agent`s polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (… |
| 1.3.6.1.4.1.232.3.2.1.4.2 | TablecpqDaOsCommonModuleTable | not-accessible | deprecated | A table of software modules that provide an interface to the device this MIB describes. |
| 1.3.6.1.4.1.232.3.2.1.4.2.1 | RowcpqDaOsCommonModuleEntry | not-accessible | deprecated | A description of a software module that provides an interface to the device this MIB describes. |
| 1.3.6.1.4.1.232.3.2.1.4.2.1.1 | ColumncpqDaOsCommonModuleIndex | read-only | deprecated | A unique index for this module description. |
| 1.3.6.1.4.1.232.3.2.1.4.2.1.2 | ColumncpqDaOsCommonModuleName | read-only | deprecated | The module name. |
| 1.3.6.1.4.1.232.3.2.1.4.2.1.3 | ColumncpqDaOsCommonModuleVersion | read-only | deprecated | The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the a… |
| 1.3.6.1.4.1.232.3.2.1.4.2.1.4 | ColumncpqDaOsCommonModuleDate | read-only | deprecated | The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 s… |
| 1.3.6.1.4.1.232.3.2.1.4.2.1.5 | ColumncpqDaOsCommonModulePurpose | read-only | deprecated | The purpose of the module described in this entry. |
| 1.3.6.1.4.1.232.3.2.1.4.3 | ScalarcpqDaOsCommonCollectionReset | read-write | optional | Drive Array MIB Collection Reset. This variable is used to force the collection agent for this MIB to scan the associated hardware for configuration changes. T… |
| 1.3.6.1.4.1.232.3.2.2 | NodecpqDaCntlr | |||
| 1.3.6.1.4.1.232.3.2.2.1 | TablecpqDaCntlrTable | not-accessible | mandatory | Array Controller Table. |
| 1.3.6.1.4.1.232.3.2.2.1.1 | RowcpqDaCntlrEntry | not-accessible | mandatory | Array Controller Entry. |
| 1.3.6.1.4.1.232.3.2.2.1.1.1 | ColumncpqDaCntlrIndex | read-only | mandatory | Array Controller Index. This value is a logical number whose meaning is OS dependent. Each physical controller has one unique controller number associated with… |
| 1.3.6.1.4.1.232.3.2.2.1.1.2 | ColumncpqDaCntlrModel | read-only | mandatory | Array Controller Model. The type of controller card. The valid types are: Other (1) You may need to upgrade your driver software and\or instrument agent(s). Yo… |
| 1.3.6.1.4.1.232.3.2.2.1.1.3 | ColumncpqDaCntlrFWRev | read-only | mandatory | Array Controller Firmware Revision. The firmware revision of the drive array controller. This value can be used to help identify a particular revision of the c… |
| 1.3.6.1.4.1.232.3.2.2.1.1.4 | ColumncpqDaCntlrStndIntr | read-only | mandatory | The status of the Standard Interface. The Standard Interface is how DOS communicates with a drive. The following values are valid for Standard Interface: Other… |
| 1.3.6.1.4.1.232.3.2.2.1.1.5 | ColumncpqDaCntlrSlot | read-only | mandatory | Array Controller Slot. This identifies the physical slot where the array controller resides in the system. For example, if this value is three, the array contr… |
| 1.3.6.1.4.1.232.3.2.2.1.1.6 | ColumncpqDaCntlrCondition | read-only | mandatory | The condition of the device. This value represents the overall condition of this controller, and any associated logical drives, physical drives, and cache modu… |
| 1.3.6.1.4.1.232.3.2.2.1.1.7 | ColumncpqDaCntlrProductRev | read-only | mandatory | Array Controller Product Revision. The Product Revision of the drive array controller. This value can be used to further identify a particular revision of the … |
| 1.3.6.1.4.1.232.3.2.2.1.1.8 | ColumncpqDaCntlrPartnerSlot | read-only | mandatory | Array Controller Partner Slot. For duplexed array controllers, this is the slot number of the partner controller. For non-duplexed controllers and partner cont… |
| 1.3.6.1.4.1.232.3.2.2.1.1.9 | ColumncpqDaCntlrCurrentRole | read-only | mandatory | Array Controller Current Role. For duplexed array controllers, this is the controllers current role. The following values are valid: other (1) Indicates that t… |
| 1.3.6.1.4.1.232.3.2.2.1.1.10 | ColumncpqDaCntlrBoardStatus | read-only | mandatory | Array Controller Board Status. The following values are valid: other (1) Indicates that the instrument agent does not recognize the status of the controller. Y… |
| 1.3.6.1.4.1.232.3.2.2.1.1.11 | ColumncpqDaCntlrPartnerBoardStatus | read-only | mandatory | Array Controller Partner Board Status. The following values are valid: other (1) Indicates that the instrument agent does not recognize the status of the contr… |
| 1.3.6.1.4.1.232.3.2.2.1.1.12 | ColumncpqDaCntlrBoardCondition | read-only | mandatory | The condition of the device. This value represents the condition of the controller and any associated cache modules. |
| 1.3.6.1.4.1.232.3.2.2.1.1.13 | ColumncpqDaCntlrPartnerBoardCondition | read-only | mandatory | The condition of the device. This value represents the condition of the controller and any associated cache modules. |
| 1.3.6.1.4.1.232.3.2.2.1.1.14 | ColumncpqDaCntlrDriveOwnership | read-only | mandatory | Array Controller Drive Ownership. For duplexed controllers, indicates to which controller slot the shared devices are associated. The following values are vali… |
| 1.3.6.1.4.1.232.3.2.2.1.1.15 | ColumncpqDaCntlrSerialNumber | read-only | mandatory | Array Controller Serial Number. The serial number of the array controller. This field will be a null (size 0) string if the controller does not support serial … |
| 1.3.6.1.4.1.232.3.2.2.1.1.16 | ColumncpqDaCntlrRedundancyType | read-only | mandatory | Array Controller Redundancy Type. The following values are valid: other (1) Indicates that the instrument agent does not recognize the redundancy type of the c… |
| 1.3.6.1.4.1.232.3.2.2.1.1.17 | ColumncpqDaCntlrRedundancyError | read-only | mandatory | Array Controller Redundancy Error. The following values are valid: other (1) Indicates that the instrument agent does not recognize the redundancy error of the… |
| 1.3.6.1.4.1.232.3.2.2.1.1.18 | ColumncpqDaCntlrAccessModuleStatus | read-only | mandatory | Array Controller RAID ADG Enabler Module Status. The following values are valid: other (1) Indicates that the agent does not recognize the RAID ADG Enabler Mod… |
| 1.3.6.1.4.1.232.3.2.2.1.1.19 | ColumncpqDaCntlrDaughterBoardType | read-only | mandatory | Array Controller Daughter Board Type. The following values are valid: other (1) Indicates that the agent does not recognize the daughter board type. You may ne… |
| 1.3.6.1.4.1.232.3.2.2.1.1.20 | ColumncpqDaCntlrHwLocation | read-only | mandatory | A text description of the hardware location of the controller. A NULL string indicates that the hardware location could not be determined or is irrelevant. |
| 1.3.6.1.4.1.232.3.2.2.1.1.21 | ColumncpqDaCntlrNumberOfBuses | read-only | mandatory | Array Controller Number of Buses. This value is the number of SCSI buses on the controller. |
| 1.3.6.1.4.1.232.3.2.2.1.1.22 | ColumncpqDaCntlrBlinkTime | read-write | mandatory | Controller Physical Drive Blink Time Count. The controller blink time variable allows the drive tray LEDs of all physical drives attached to this controller to… |
| 1.3.6.1.4.1.232.3.2.2.1.1.23 | ColumncpqDaCntlrRebuildPriority | read-only | mandatory | Array Controller Rebuild Priority. This is the controller`s rebuild priority. The following values are valid: other (1) Indicates that the instrument agent doe… |
| 1.3.6.1.4.1.232.3.2.2.1.1.24 | ColumncpqDaCntlrExpandPriority | read-only | mandatory | Array Controller Expand Priority. This is the controller`s expand priority. The following values are valid: other (1) Indicates that the instrument agent does … |
| 1.3.6.1.4.1.232.3.2.2.1.1.25 | ColumncpqDaCntlrNumberOfInternalPorts | read-only | mandatory | Array Controller Number of Internal Ports. This value is the number of internal connectors on the controller. |
| 1.3.6.1.4.1.232.3.2.2.1.1.26 | ColumncpqDaCntlrNumberOfExternalPorts | read-only | mandatory | Array Controller Number of External Ports. This value is the number of external connectors on the controller. |
| 1.3.6.1.4.1.232.3.2.2.1.1.27 | ColumncpqDaCntlrDriveWriteCacheState | read-only | mandatory | Array Controller Drive Write Cache State. This is the controller`s drive write cache setting. The following values are valid: other (1) Indicates that the inst… |
| 1.3.6.1.4.1.232.3.2.2.1.1.28 | ColumncpqDaCntlrPartnerSerialNumber | read-only | mandatory | Array Controller Partner Serial Number. The serial number of the partner array controller. This field will be a null (size 0) string if the partner controller … |
| 1.3.6.1.4.1.232.3.2.2.1.1.29 | ColumncpqDaCntlrOptionRomRev | read-only | mandatory | Array Controller Option ROM Revision. The option ROM revision of the chipset or HBA being used by the B-Series controller. If the controller does not support t… |
| 1.3.6.1.4.1.232.3.2.2.1.1.30 | ColumncpqDaCntlrHbaFWRev | read-only | mandatory | Array Controller HBA Firmware Revision. The firmware revision of the chipset or HBA being used by the B-Series controller. If the controller does not support t… |
| 1.3.6.1.4.1.232.3.2.2.1.1.31 | ColumncpqDaCntlrHBAModeOptionRomRev | read-only | mandatory | Array Controller HBA Mode Option Rom Revision. The revision of option ROM that would run on this chipset or HBA (being used by the B-Series controller), if it … |
| 1.3.6.1.4.1.232.3.2.2.1.1.32 | ColumncpqDaCntlrCurrentTemp | read-only | mandatory | Array Controller Current Temperature. This is the temperature of the array controller in degrees Celsius. The field will contain -1 if the controller temperatu… |
| 1.3.6.1.4.1.232.3.2.2.1.1.33 | ColumncpqDaCntlrLastLockupCode | read-only | mandatory | Array Controller Last Lockup Code. The lockup code of the array controller if a lockup occurred prior to the last controller reset. This value will be nonzero … |
| 1.3.6.1.4.1.232.3.2.2.1.1.34 | ColumncpqDaCntlrEncryptionStatus | read-only | mandatory | Array Controller Encryption Status. The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. You may need to… |
| 1.3.6.1.4.1.232.3.2.2.1.1.35 | ColumncpqDaCntlrASICEncptSelfTestStatus | read-only | mandatory | Array Controller ASIC Encryption Self Test Status. The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. … |
| 1.3.6.1.4.1.232.3.2.2.1.1.36 | ColumncpqDaCntlrEncryptCspNvramStatus | read-only | mandatory | Array Controller Encryption Critical Security Parameter NVRAM Status. The following values are valid: other (1) Indicates that the instrument agent does not re… |
| 1.3.6.1.4.1.232.3.2.2.1.1.37 | ColumncpqDaCntlrEncryptCryptoOfficerPwdSetStatus | read-only | mandatory | Array Controller Encryption Crypto Officer Password Set Status. The following values are valid: other (1) Indicates that the instrument agent does not recogniz… |
| 1.3.6.1.4.1.232.3.2.2.1.1.38 | ColumncpqDaCntlrEncryptCntlrPwdSetStatus | read-only | mandatory | Array Controller Encryption Controller Password Set Status. The following values are valid: other (1) Indicates that the instrument agent does not recognize th… |
| 1.3.6.1.4.1.232.3.2.2.1.1.39 | ColumncpqDaCntlrEncryptCntlrPwdAvailStatus | read-only | mandatory | Array Controller Encryption Controller Password Availability Status. The following values are valid: other (1) Indicates that the instrument agent does not rec… |
| 1.3.6.1.4.1.232.3.2.2.1.1.40 | ColumncpqDaCntlrUnencryptedLogDrvCreationPolicy | read-only | mandatory | Array Controller Unencrypted Logical Drive Creation Policy. The following values are valid: other (1) Indicates that the instrument agent does not recognize th… |
| 1.3.6.1.4.1.232.3.2.2.1.1.41 | ColumncpqDaCntlrEncryptedLogDrvCreationPolicy | read-only | mandatory | Array Controller Encrypted Logical Drive Creation Policy. The following values are valid: other (1) Indicates that the instrument agent does not recognize the … |
| 1.3.6.1.4.1.232.3.2.2.1.1.42 | ColumncpqDaCntlrEncryptFWLockStatus | read-only | mandatory | Array Controller Encryption Firmware Lock Status. The following values are valid: other (1) Indicates that the instrument agent does not recognize the value. Y… |
| 1.3.6.1.4.1.232.3.2.2.1.1.43 | ColumncpqDaCntlrOperatingMode | read-only | mandatory | Array Controller Operating Mode. The array controller`s current operating mode. The following values are valid: The following values are valid: other (1) Indic… |
| 1.3.6.1.4.1.232.3.2.2.2 | TablecpqDaAccelTable | not-accessible | mandatory | Cache Module Board Table. Note that for some controller models, a cache module board that physically attaches to the controller or chipset may not be an availa… |
| 1.3.6.1.4.1.232.3.2.2.2.1 | RowcpqDaAccelEntry | not-accessible | mandatory | Cache Module Board Entry. |
| 1.3.6.1.4.1.232.3.2.2.2.1.1 | ColumncpqDaAccelCntlrIndex | read-only | mandatory | Cache Module Board Controller Index. This value is a logical number whose meaning is OS dependent. The value has a direct mapping to the controller table index… |
| 1.3.6.1.4.1.232.3.2.2.2.1.2 | ColumncpqDaAccelStatus | read-only | mandatory | Cache Module/Operations Status. This describes the status of the cache module and/or cache operations. Note that for some controller models, a cache module boa… |
| 1.3.6.1.4.1.232.3.2.2.2.1.3 | ColumncpqDaAccelMemory | read-only | mandatory | Write Cache Memory. This shows the amount of memory allocated for the write cache in kilobytes. Because data is kept in duplicate (mirrored), the actual amount… |
| 1.3.6.1.4.1.232.3.2.2.2.1.4 | ColumncpqDaAccelBadData | read-only | mandatory | Cache Module Board Bad Data. The following values are valid: None (2) Indicates that no data loss occurred. The battery packs were properly charged when the sy… |
| 1.3.6.1.4.1.232.3.2.2.2.1.5 | ColumncpqDaAccelErrCode | read-only | mandatory | Cache Module Board Error Code. Use this to determine the status of the write cache operations. The status can be: Other (1) Indicates that the instrument agent… |
| 1.3.6.1.4.1.232.3.2.2.2.1.6 | ColumncpqDaAccelBattery | read-only | mandatory | Cache Module Board Backup Power Status. This monitors the status of each backup power source on the board. The backup power source can only recharge when the s… |
| 1.3.6.1.4.1.232.3.2.2.2.1.7 | ColumncpqDaAccelReadErrs | read-only | mandatory | Cache Module Board Read Errors. This shows the total number of read memory parity errors that were detected while reading from the Cache Module board. The mirr… |
| 1.3.6.1.4.1.232.3.2.2.2.1.8 | ColumncpqDaAccelWriteErrs | read-only | mandatory | Cache Module Board Write Errors. This shows the total number of write memory parity errors that were detected while writing to the Cache Module board. Write pa… |
| 1.3.6.1.4.1.232.3.2.2.2.1.9 | ColumncpqDaAccelCondition | read-only | mandatory | The condition of the device. This value represents the overall condition of this cache module. |
| 1.3.6.1.4.1.232.3.2.2.2.1.10 | ColumncpqDaAccelReadMemory | read-only | mandatory | Read Cache Memory. This shows the amount of memory allocated for the read cache in kilobytes. Because data is kept in duplicate (mirrored), the actual amount o… |
| 1.3.6.1.4.1.232.3.2.2.2.1.11 | ColumncpqDaAccelSerialNumber | read-only | mandatory | Cache Module Serial Number. The serial number of the Cache Module. This field will be a null (size 0) string if the cache module does not support serial number. |
| 1.3.6.1.4.1.232.3.2.2.2.1.12 | ColumncpqDaAccelTotalMemory | read-only | mandatory | Total Cache Memory. This value is the total amount of cache module memory in kilobytes, including both battery-backed and non-battery-backed memory. |
| 1.3.6.1.4.1.232.3.2.2.2.1.13 | ColumncpqDaAccelReadCachePercent | read-only | mandatory | Read Cache Percent. This shows the percent of cache memory allocated for read ahead caching. If the data cannot be determined or is not applicable, the value i… |
| 1.3.6.1.4.1.232.3.2.2.2.1.14 | ColumncpqDaAccelWriteCachePercent | read-only | mandatory | Write Cache Percent. This shows the percent of cache memory allocated for posted write caching. If the data cannot be determined or is not applicable, the valu… |
| 1.3.6.1.4.1.232.3.2.2.2.1.15 | ColumncpqDaAccelFailedBatteries | read-only | mandatory | Cache Module Failed Batteries. This lists the location of cache module failed batteries. Each octet present contains the position number of a failed battery. A… |
| 1.3.6.1.4.1.232.3.2.2.2.1.16 | ColumncpqDaAccelBackupPowerSource | read-only | mandatory | Cache Module Board Backup Power Source. This describes the backup power source being used by the Cache Module board. The status can be: Other (1) Indicates tha… |
| 1.3.6.1.4.1.232.3.2.2.2.1.17 | ColumncpqDaAccelBoardCurrentTemp | read-only | mandatory | Cache Module Board Current Temperature. This is the temperature of the cache module board in degrees Celsius. The field will contain -1 if the cache module boa… |
| 1.3.6.1.4.1.232.3.2.2.2.1.18 | ColumncpqDaAccelCapacitorCurrentTemp | read-only | mandatory | Cache Module Capacitor Current Temperature. This is the temperature of the Super-Cap in degrees Celsius. The field will contain -1 if the Super-Cap temperature… |
| 1.3.6.1.4.1.232.3.2.2.2.1.19 | ColumncpqDaAccelMemoryDataWidth | read-only | mandatory | Cache Memory Data Width. This is the memory data width (in bits), for the attached cache module. The field will contain -1 if the memory data width cannot be c… |
| 1.3.6.1.4.1.232.3.2.2.2.1.20 | ColumncpqDaAccelMemoryTransferRate | read-only | mandatory | Cache Memory Transfer Rate. This is the memory transfer rate in megatransfers per second (MT/s), for the attached cache module . The field will contain -1 if t… |
| 1.3.6.1.4.1.232.3.2.2.3 | TablecpqDaManagedCableTable | not-accessible | mandatory | Drive Array Managed Cable Table. |
| 1.3.6.1.4.1.232.3.2.2.3.1 | RowcpqDaManagedCableEntry | not-accessible | mandatory | Drive Array Managed Cable Entry. |
| 1.3.6.1.4.1.232.3.2.2.3.1.1 | ColumncpqDaManagedCableIndex | read-only | mandatory | Managed Cable Index. This index identifies a controller and managed cable association. This index uniquely identifies a single managed cable connected to a con… |
| 1.3.6.1.4.1.232.3.2.2.3.1.2 | ColumncpqDaManagedCableCntlrIndex | read-only | mandatory | Managed Cable Controller Index. This value maps the managed cables into their respective controllers. This value is a logical number whose meaning is OS depend… |
| 1.3.6.1.4.1.232.3.2.2.3.1.3 | ColumncpqDaManagedCableHostConnector | read-only | mandatory | Managed Cable Host Connector. This is the port connector to which the managed cable is attached. If the host connector cannot be determined, the agent will ret… |
| 1.3.6.1.4.1.232.3.2.2.3.1.4 | ColumncpqDaManagedCableStatus | read-only | mandatory | Managed Cable Status. The following values are defined: Other (1) Indicates that the instrument agent can not determine the managed cable status. Ok (2) Indica… |
| 1.3.6.1.4.1.232.3.2.2.3.1.5 | ColumncpqDaManagedCableFaultCode | read-only | mandatory | Managed Cable Fault Code. The following values are defined: Other (1) Indicates that the instrument agent can not determine the managed cable fault code. None … |
| 1.3.6.1.4.1.232.3.2.2.3.1.6 | ColumncpqDaManagedCableVendorRevision | read-only | mandatory | Managed Cable Vendor Revision. Indicates the vendor revision of the managed cable. If the managed cable does not support vendor revision, the instrument agent … |
| 1.3.6.1.4.1.232.3.2.2.3.1.7 | ColumncpqDaManagedCableVendorSerialNumber | read-only | mandatory | Managed Cable Vendor Serial Number. Indicates the vendor serial number of the managed cable. If the managed cable does not support vendor serial number, the in… |
| 1.3.6.1.4.1.232.3.2.2.3.1.8 | ColumncpqDaManagedCableVendorPartNumber | read-only | mandatory | Managed Cable Vendor Part Number. Indicates the vendor part number of the managed cable. If the managed cable does not support vendor part number, the instrume… |
| 1.3.6.1.4.1.232.3.2.2.3.1.9 | ColumncpqDaManagedCableLength | read-only | mandatory | Managed Cable Length. Indicates the length of the managed cable in meters. This field will contain -1 if the cable length cannot be determined or if the manage… |
| 1.3.6.1.4.1.232.3.2.3 | NodecpqDaLogDrv | |||
| 1.3.6.1.4.1.232.3.2.3.1 | TablecpqDaLogDrvTable | not-accessible | mandatory | Drive Array Logical Drive Table. A table of logical drive entries. |
| 1.3.6.1.4.1.232.3.2.3.1.1 | RowcpqDaLogDrvEntry | not-accessible | mandatory | Drive Array Logical Drive Entry. A logical drive entry. |
| 1.3.6.1.4.1.232.3.2.3.1.1.1 | ColumncpqDaLogDrvCntlrIndex | read-only | mandatory | Drive Array Logical Drive Controller Index. This maps the logical drives into their respective controllers. Controller index `i` under the controller group own… |
| 1.3.6.1.4.1.232.3.2.3.1.1.2 | ColumncpqDaLogDrvIndex | read-only | mandatory | Drive Array Logical Drive Index. This logical drive number keeps track of multiple instances of logical drives which are on the same controller. For each contr… |
| 1.3.6.1.4.1.232.3.2.3.1.1.3 | ColumncpqDaLogDrvFaultTol | read-only | mandatory | Logical Drive Fault Tolerance. This shows the fault tolerance mode of the logical drive. The following values are valid for the Logical Drive Fault Tolerance: … |
| 1.3.6.1.4.1.232.3.2.3.1.1.4 | ColumncpqDaLogDrvStatus | read-only | mandatory | Logical Drive Status. The logical drive can be in one of the following states: Ok (2) Indicates that the logical drive is in normal operation mode. Failed (3) … |
| 1.3.6.1.4.1.232.3.2.3.1.1.5 | ColumncpqDaLogDrvAutoRel | read-write | mandatory | Array Controller Logical Drive Auto-Reliability Delay. This value indicates how many seconds the logical drive will wait with no requests before beginning Auto… |
| 1.3.6.1.4.1.232.3.2.3.1.1.6 | ColumncpqDaLogDrvRebuildBlks | read-only | deprecated | Logical Drive Rebuild Blocks Remaining. After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value shows how ma… |
| 1.3.6.1.4.1.232.3.2.3.1.1.7 | ColumncpqDaLogDrvHasAccel | read-only | mandatory | Logical Drive Has Cache Module Board. This indicates whether the logical drive has a Cache Module board configured and enabled. The following values are valid:… |
| 1.3.6.1.4.1.232.3.2.3.1.1.8 | ColumncpqDaLogDrvAvailSpares | read-only | deprecated | Drive Array Logical Drive Available Spares. This indicates if this logical drive has one or more spares designated for it that are not currently in use by anot… |
| 1.3.6.1.4.1.232.3.2.3.1.1.9 | ColumncpqDaLogDrvSize | read-only | mandatory | Logical Drive Size. This is the size of the logical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufact… |
| 1.3.6.1.4.1.232.3.2.3.1.1.10 | ColumncpqDaLogDrvPhyDrvIDs | read-only | deprecated | Drive Array Logical Drive Physical Drive IDs. This lists the physical drive IDs which are associated with this logical drive. These are the same IDs which can … |
| 1.3.6.1.4.1.232.3.2.3.1.1.11 | ColumncpqDaLogDrvCondition | read-only | mandatory | The Logical Drive condition. This value represents the overall condition of this logical drive and any associated physical drives. |
| 1.3.6.1.4.1.232.3.2.3.1.1.12 | ColumncpqDaLogDrvPercentRebuild | read-only | mandatory | Logical Drive Percent Rebuild. After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value is the percent comple… |
| 1.3.6.1.4.1.232.3.2.3.1.1.13 | ColumncpqDaLogDrvStripeSize | read-only | mandatory | Logical Drive Stripe Size. This is the size of a logical drive stripe in kilobytes. |
| 1.3.6.1.4.1.232.3.2.3.1.1.14 | ColumncpqDaLogDrvOsName | read-only | mandatory | Logical Drive OS Name. The OS name for this array logical drive. This field will be a null (size 0) string if the agent does not support OS name. |
| 1.3.6.1.4.1.232.3.2.3.1.1.15 | ColumncpqDaLogDrvBlinkTime | read-write | mandatory | Logical Drive Physical Drive Blink Time Count. The logical drive blink time variable allows the drive tray LEDs of all physical drives in a logical drive to bl… |
| 1.3.6.1.4.1.232.3.2.3.1.1.16 | ColumncpqDaLogDrvSpareReplaceMap | read-only | deprecated | Logical Drive Spare To Replacement Drive Map. This data structure contains the spare to physical drive replacement map. The format is: octet contents ===== ===… |
| 1.3.6.1.4.1.232.3.2.3.1.1.17 | ColumncpqDaLogDrvRebuildingPhyDrv | read-only | mandatory | Logical Drive Physical Drive Rebuilding Index. This is the physical drive index of the physical drive that is currently rebuilding. If the value cannot be dete… |
| 1.3.6.1.4.1.232.3.2.3.1.1.18 | ColumncpqDaLogDrvMultipathAccess | read-only | mandatory | Logical Drive Multi-path Access. This indicates whether all the physical disks including spares of this logical drive have been configured to have and currentl… |
| 1.3.6.1.4.1.232.3.2.3.1.1.19 | ColumncpqDaLogDrvNmbrOfParityGroups | read-only | mandatory | Logical Drive Number Of Parity Groups. Indicates the number of parity groups (i.e. RAID 4/5/6 subvolumes), that are being striped across. |
| 1.3.6.1.4.1.232.3.2.3.1.1.20 | ColumncpqDaLogDrvSplitMirrorBackupLogDrv | read-only | mandatory | Logical Drive Split Mirror Backup Logical Drive. Indicates if this logical drive is a backup logical drive belonging to a split mirror. The following values ar… |
| 1.3.6.1.4.1.232.3.2.3.1.1.21 | ColumncpqDaLogDrvCacheVolAccelAssocType | read-only | mandatory | Logical Drive Cache Volume Accelerator Association Type. Indicates the way in which this logical drive is associated with a cache volume accelerator group. The… |
| 1.3.6.1.4.1.232.3.2.3.1.1.22 | ColumncpqDaLogDrvCacheVolIndex | read-only | mandatory | Logical Drive Cache Volume Index. The logical drive index of the cache volume used by this logical drive. The value of this index is the same as the logical dr… |
| 1.3.6.1.4.1.232.3.2.3.1.1.23 | ColumncpqDaLogDrvRPIPercentComplete | read-only | mandatory | Logical Drive Rapid Parity Initialization Percent Complete. When a fault tolerant logical volume is created, parity data for the volume must be initialized. Th… |
| 1.3.6.1.4.1.232.3.2.3.1.1.24 | ColumncpqDaLogDrvSSDSmartPathStatus | read-only | mandatory | Logical Drive SSD Smart Path Status. Indicates the logical drive SSD Smart Path status. An SSD Smart Path for a logical drive can be utilized only when both th… |
| 1.3.6.1.4.1.232.3.2.3.1.1.25 | ColumncpqDaLogDrvEncryptionStatus | read-only | mandatory | Logical Drive Encryption Status. Indicates the logical drive encryption status. The following values are defined: Other (1) Indicates that the instrument agent… |
| 1.3.6.1.4.1.232.3.2.3.2 | TablecpqDaLogDrvPhyDrvExtAttachTable | not-accessible | mandatory | Drive Array Logical Drive Physical Drive Extended Attachment Table. A table of logical drives and their associated physical drives. |
| 1.3.6.1.4.1.232.3.2.3.2.1 | RowcpqDaLogDrvPhyDrvExtAttachEntry | not-accessible | mandatory | Drive Array Logical Drive Extended Physical Drive Attachment Entry. |
| 1.3.6.1.4.1.232.3.2.3.2.1.1 | ColumncpqDaLogDrvPhyDrvAttachExtIndex | read-only | mandatory | Drive Array Logical Drive Extended Attach Index. This index identifies a controller, logical drive and physical drive connection. This index uniquely identifie… |
| 1.3.6.1.4.1.232.3.2.3.2.1.2 | ColumncpqDaLogDrvCntlrExtended | read-only | mandatory | Drive Array Logical Drive Controller Extended. This maps the logical drives into their respective controllers. This value is a logical number whose meaning is … |
| 1.3.6.1.4.1.232.3.2.3.2.1.3 | ColumncpqDaLogDrvLogDrvExtended | read-only | mandatory | Drive Array Logical Drive Extended. This logical drive number keeps track of multiple instances of logical drives which are on the same controller. For each co… |
| 1.3.6.1.4.1.232.3.2.3.2.1.4 | ColumncpqDaLogDrvPhyDrvExtended | read-only | mandatory | Drive Array Logical Drive Physical Drive Extended. This value is used for selecting the physical drive number in the table entry. This number keeps track of mu… |
| 1.3.6.1.4.1.232.3.2.3.3 | TablecpqDaLogDrvSprRplcExtAttachTable | not-accessible | mandatory | Drive Array Logical Drive Spare Replacement Extended Attachment Table. A table of logical drives, physical drives and their replacement drives. If spare drives… |
| 1.3.6.1.4.1.232.3.2.3.3.1 | RowcpqDaLogDrvSprRplcExtAttachEntry | not-accessible | mandatory | Drive Array Logical Drive Spare Replacement Extended Attachment Entry. |
| 1.3.6.1.4.1.232.3.2.3.3.1.1 | ColumncpqDaLogDrvSprRplcAttachExtIndex | read-only | mandatory | Drive Array Logical Drive Spare Replacment Extended Attach Index. This index uniquely identifies a controller, logical drive, physical drive and replacement dr… |
| 1.3.6.1.4.1.232.3.2.3.3.1.2 | ColumncpqDaLogDrvSprRplcCntlrExtended | read-only | mandatory | Drive Array Logical Drive Spare Replacement Controller Extended. This value maps the spare replacement drives into their respective controllers. This value is … |
| 1.3.6.1.4.1.232.3.2.3.3.1.3 | ColumncpqDaLogDrvSprRplcLogDrvExtended | read-only | mandatory | Drive Array Logical Drive Spare Replace Logical Drive Extended. This logical drive number keeps track of multiple instances of logical drives which are on the … |
| 1.3.6.1.4.1.232.3.2.3.3.1.4 | ColumncpqDaLogDrvSprRplcReplacedPhysDrvExtended | read-only | mandatory | Drive Array Logical Drive Spare Replace Replaced Physical Drive Extended. This is the replaced drive physical drive number. |
| 1.3.6.1.4.1.232.3.2.3.3.1.5 | ColumncpqDaLogDrvSprRplcSparePhysDrvExtended | read-only | mandatory | Drive Array Logical Drive Spare Replace Spare Physical Drive Extended. This is the replacement spare physical drive number. |
| 1.3.6.1.4.1.232.3.2.3.4 | TablecpqDaLogDrvAvalSprExtAttachTable | not-accessible | mandatory | Drive Array Logical Drive Available Spare Extended Attachment Table. A table of logical drives and their available spare drives. This table indicates when a lo… |
| 1.3.6.1.4.1.232.3.2.3.4.1 | RowcpqDaLogDrvAvalSprExtAttachEntry | not-accessible | mandatory | Drive Array Logical Drive Available Spare Extended Attachment Entry. |
| 1.3.6.1.4.1.232.3.2.3.4.1.1 | ColumncpqDaLogDrvAvailSprAttachExtIndex | read-only | mandatory | Drive Array Logical Drive Available Spare Extended Attach Index. This index uniquely identifies a controller, logical drive and available spare drive connectio… |
| 1.3.6.1.4.1.232.3.2.3.4.1.2 | ColumncpqDaLogDrvAvailSprCntlrExtended | read-only | mandatory | Drive Array Logical Drive Available Spare Controller Extended. This value maps the available spare drives into their respective controllers This value is a log… |
| 1.3.6.1.4.1.232.3.2.3.4.1.3 | ColumncpqDaLogDrvAvailSprLogDrvExtended | read-only | mandatory | Drive Array Logical Drive Available Spare Logical Drive Extended. This logical drive number keeps track of multiple instances of logical drives which are on th… |
| 1.3.6.1.4.1.232.3.2.3.4.1.4 | ColumncpqDaLogDrvAvailSprAvailableSpareExtended | read-only | mandatory | Drive Array Logical Drive Available Spare Available Spare Extended. This is the available spare drive number assigned to one or more logical drives. |
| 1.3.6.1.4.1.232.3.2.3.5 | TablecpqDaLogDrvCacheVolumeAccelTable | not-accessible | mandatory | Drive Array Logical Drive Cache Volume Accelerator Table. The cpqDaLogDrvCacheVolumeAccelTable table contains configuration and statistical information about c… |
| 1.3.6.1.4.1.232.3.2.3.5.1 | RowcpqDaLogDrvCacheVolumeAccelEntry | not-accessible | mandatory | Drive Array Logical Drive Cache Volume Accelerator Entry. A cache volume entry. |
| 1.3.6.1.4.1.232.3.2.3.5.1.1 | ColumncpqDaLogDrvCacheVolAccelCntlrIndex | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Controller Index. This index maps the cache volume back to the controller to which it is attached. The value… |
| 1.3.6.1.4.1.232.3.2.3.5.1.2 | ColumncpqDaLogDrvCacheVolAccelLogDrvIndex | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Logical Drive Index. The logical drive index for this cache volume. The value of this index is the same as t… |
| 1.3.6.1.4.1.232.3.2.3.5.1.3 | ColumncpqDaLogDrvCacheVolAccelCachingAlgorithm | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Caching Algorithm. The caching algorithm currently in use for the cache volume. The following values are def… |
| 1.3.6.1.4.1.232.3.2.3.5.1.4 | ColumncpqDaLogDrvCacheVolAccelCacheState | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Cache State. The current cache state of the cache volume. The following values are defined: Other(1) The ins… |
| 1.3.6.1.4.1.232.3.2.3.5.1.5 | ColumncpqDaLogDrvCacheVolAccelWritePolicy | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Write Policy. The write policy that the cache volume has been configured to use. The following values are de… |
| 1.3.6.1.4.1.232.3.2.3.5.1.6 | ColumncpqDaLogDrvCacheVolAccelNoOfReadHitsH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Hits (high). cpqDaLogDrvCacheVolAccelNoOfReadHitsH and cpqDaLogDrvCacheVolAccelNoOfRead… |
| 1.3.6.1.4.1.232.3.2.3.5.1.7 | ColumncpqDaLogDrvCacheVolAccelNoOfReadHits | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Hits (low). cpqDaLogDrvCacheVolAccelNoOfReadHits and cpqDaLogDrvCacheVolAccelNoOfReadHi… |
| 1.3.6.1.4.1.232.3.2.3.5.1.8 | ColumncpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Misses - Do Load (high). cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadH and cpqDaLogDrvCac… |
| 1.3.6.1.4.1.232.3.2.3.5.1.9 | ColumncpqDaLogDrvCacheVolAccelNoOfReadMissDoLoad | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Misses - Do Load (low). cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoad and cpqDaLogDrvCache… |
| 1.3.6.1.4.1.232.3.2.3.5.1.10 | ColumncpqDaLogDrvCacheVolAccelNoOfReadMissLoadingH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Misses - Loading (high). cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingH and cpqDaLogDrvCa… |
| 1.3.6.1.4.1.232.3.2.3.5.1.11 | ColumncpqDaLogDrvCacheVolAccelNoOfReadMissLoading | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Misses - Loading (low). cpqDaLogDrvCacheVolAccelNoOfReadMissLoading and cpqDaLogDrvCach… |
| 1.3.6.1.4.1.232.3.2.3.5.1.12 | ColumncpqDaLogDrvCacheVolAccelNoOfReadMissSkipH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Misses - Skip (high). cpqDaLogDrvCacheVolAccelNoOfReadMissSkipH and cpqDaLogDrvCacheVol… |
| 1.3.6.1.4.1.232.3.2.3.5.1.13 | ColumncpqDaLogDrvCacheVolAccelNoOfReadMissSkip | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Misses - Skip (low). cpqDaLogDrvCacheVolAccelNoOfReadMissSkip and cpqDaLogDrvCacheVolAc… |
| 1.3.6.1.4.1.232.3.2.3.5.1.14 | ColumncpqDaLogDrvCacheVolAccelReadCacheHitRate | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Read Cache Hit Rate. The rate (percentage) that the read cache for this cache volume is being utilized. If t… |
| 1.3.6.1.4.1.232.3.2.3.5.1.15 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteHitsH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Write Cache Hits (high). cpqDaLogDrvCacheVolAccelNoOfWriteHitsH and cpqDaLogDrvCacheVolAccelNoOfWr… |
| 1.3.6.1.4.1.232.3.2.3.5.1.16 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteHits | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Write Cache Hits (low). cpqDaLogDrvCacheVolAccelNoOfWriteHits and cpqDaLogDrvCacheVolAccelNoOfWrit… |
| 1.3.6.1.4.1.232.3.2.3.5.1.17 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Write Cache Misses - Do Load (high). cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadH and cpqDaLogDrvC… |
| 1.3.6.1.4.1.232.3.2.3.5.1.18 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoad | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Write Cache Misses - Do Load (low). cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoad and cpqDaLogDrvCac… |
| 1.3.6.1.4.1.232.3.2.3.5.1.19 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Write Cache Misses - Loading (high). cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingH and cpqDaLogDrv… |
| 1.3.6.1.4.1.232.3.2.3.5.1.20 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteMissLoading | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Write Cache Misses - Loading (low). cpqDaLogDrvCacheVolAccelNoOfWriteMissLoading and cpqDaLogDrvCa… |
| 1.3.6.1.4.1.232.3.2.3.5.1.21 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteMissSkipH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Write Cache Misses - Skip (high). cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipH and cpqDaLogDrvCacheV… |
| 1.3.6.1.4.1.232.3.2.3.5.1.22 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteMissSkip | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Write Cache Misses - Skip (low). cpqDaLogDrvCacheVolAccelNoOfWriteMissSkip and cpqDaLogDrvCacheVol… |
| 1.3.6.1.4.1.232.3.2.3.5.1.23 | ColumncpqDaLogDrvCacheVolAccelWriteCacheHitRate | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Write Cache Hit Rate. The rate (percentage) that the write cache for this cache volume is being utilized. If… |
| 1.3.6.1.4.1.232.3.2.3.5.1.24 | ColumncpqDaLogDrvCacheVolAccelLoadFailures | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Load Failures. The number of times data failed to load onto this cache volume due to an error. If the value … |
| 1.3.6.1.4.1.232.3.2.3.5.1.25 | ColumncpqDaLogDrvCacheVolAccelCacheLineSize | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Cache Line Size. cpqDaLogDrvCacheVolAccelCacheLineSize is the cache line size in number of blocks. If the va… |
| 1.3.6.1.4.1.232.3.2.3.5.1.26 | ColumncpqDaLogDrvCacheVolAccelNoOfReadMissLockedH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Misses - Locked (high). cpqDaLogDrvCacheVolAccelNoOfReadMissLockedH and cpqDaLogDrvCach… |
| 1.3.6.1.4.1.232.3.2.3.5.1.27 | ColumncpqDaLogDrvCacheVolAccelNoOfReadMissLocked | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Misses - Locked (low). cpqDaLogDrvCacheVolAccelNoOfReadMissLocked and cpqDaLogDrvCacheV… |
| 1.3.6.1.4.1.232.3.2.3.5.1.28 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteMissLockedH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Write Cache Misses - Locked (high). cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedH and cpqDaLogDrvCa… |
| 1.3.6.1.4.1.232.3.2.3.5.1.29 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteMissLocked | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Misses - Locked (low). cpqDaLogDrvCacheVolAccelNoOfWriteMissLocked and cpqDaLogDrvCache… |
| 1.3.6.1.4.1.232.3.2.3.5.1.30 | ColumncpqDaLogDrvCacheVolAccelNoOfReadMissTotalH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Misses - Total (high). cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH and cpqDaLogDrvCacheV… |
| 1.3.6.1.4.1.232.3.2.3.5.1.31 | ColumncpqDaLogDrvCacheVolAccelNoOfReadMissTotal | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Read Cache Misses - Total (low). cpqDaLogDrvCacheVolAccelNoOfReadMissTotal and cpqDaLogDrvCacheVol… |
| 1.3.6.1.4.1.232.3.2.3.5.1.32 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteMissTotalH | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Write Cache Misses - Total (high). cpqDaLogDrvCacheVolAccelNoOfWriteMissTotalH and cpqDaLogDrvCach… |
| 1.3.6.1.4.1.232.3.2.3.5.1.33 | ColumncpqDaLogDrvCacheVolAccelNoOfWriteMissTotal | read-only | mandatory | Drive Array Logical Drive Cache Volume Accelerator Number Of Write Cache Misses - Total (low). cpqDaLogDrvCacheVolAccelNoOfReadMissTotal and cpqDaLogDrvCacheVo… |
| 1.3.6.1.4.1.232.3.2.4 | NodecpqDaSpareDrv | |||
| 1.3.6.1.4.1.232.3.2.4.1 | TablecpqDaSpareTable | not-accessible | mandatory | Drive Array Spare Table. A table of spare entries. |
| 1.3.6.1.4.1.232.3.2.4.1.1 | RowcpqDaSpareEntry | not-accessible | mandatory | Drive Array Spare Entry. An entry in the spare table. |
| 1.3.6.1.4.1.232.3.2.4.1.1.1 | ColumncpqDaSpareCntlrIndex | read-only | mandatory | Drive Array Spare Controller Index. This index maps the spare drive back to the controller to which it is attached. The value of this index is the same as the … |
| 1.3.6.1.4.1.232.3.2.4.1.1.2 | ColumncpqDaSparePhyDrvIndex | read-only | mandatory | Drive Array Spare Physical Drive Index. This index maps the spare to the physical drive it represents. The value of this index is the same as the one used with… |
| 1.3.6.1.4.1.232.3.2.4.1.1.3 | ColumncpqDaSpareStatus | read-only | mandatory | Spare Status. This shows the status of the on-line spare drive. The following values are valid for the spare status: Failed (3) The on-line spare has failed an… |
| 1.3.6.1.4.1.232.3.2.4.1.1.4 | ColumncpqDaSpareReplacedDrv | read-only | mandatory | Spare Replaced Drive. If the spare status is active(6) or building(5), then this has the physical drive number of the replaced drive. Otherwise a value of -1 w… |
| 1.3.6.1.4.1.232.3.2.4.1.1.5 | ColumncpqDaSpareRebuildBlks | read-only | deprecated | Drive Array Spare Number Of Rebuild Blocks Left. If the spare status is building(5), then this is the number of blocks left to rebuild before completion. The d… |
| 1.3.6.1.4.1.232.3.2.4.1.1.6 | ColumncpqDaSpareCondition | read-only | mandatory | The Spare Drive condition. This value represents the overall condition of this spare drive and any associated physical drives. |
| 1.3.6.1.4.1.232.3.2.4.1.1.7 | ColumncpqDaSpareBusNumber | read-only | mandatory | Spare Drive SCSI Bus Number. The bus number indicates to which SCSI bus this spare drive is attached. The first instance is one and increments for each SCSI bu… |
| 1.3.6.1.4.1.232.3.2.4.1.1.8 | ColumncpqDaSpareBay | read-only | mandatory | Spare Drive Bay Location. This value matches the bay location where the physical drive has been installed. For a SCSI drive, this is the SCSI ID of the drive. |
| 1.3.6.1.4.1.232.3.2.4.1.1.9 | ColumncpqDaSpareReplacedDrvBusNumber | read-only | mandatory | Spare Replaced Drive Bus Number. If the spare status is active(6) or building(5), then this has the physical drive bus number of the replaced drive. If the val… |
| 1.3.6.1.4.1.232.3.2.4.1.1.10 | ColumncpqDaSpareReplacedDrvBay | read-only | mandatory | Spare Replaced Drive Bay. If the spare status is active(6) or building(5), then this has the physical drive bay number of the replaced drive. If the value cann… |
| 1.3.6.1.4.1.232.3.2.4.1.1.11 | ColumncpqDaSparePercentRebuild | read-only | mandatory | Drive Array Spare Percent Rebuild. If the spare status is building(5), then this is percent complete of of the rebuild. The data contained on the failed physic… |
| 1.3.6.1.4.1.232.3.2.4.1.1.12 | ColumncpqDaSpareLocationString | read-only | mandatory | Spare Drive Location String. This string describes the location of the drive in relation to the controller. If the location string cannot be determined, the ag… |
| 1.3.6.1.4.1.232.3.2.5 | NodecpqDaPhyDrv | |||
| 1.3.6.1.4.1.232.3.2.5.1 | TablecpqDaPhyDrvTable | not-accessible | mandatory | Drive Array Physical Drive Table. A table of physical drive entries. |
| 1.3.6.1.4.1.232.3.2.5.1.1 | RowcpqDaPhyDrvEntry | not-accessible | mandatory | Drive Array Physical Drive Entry. A physical drive entry. |
| 1.3.6.1.4.1.232.3.2.5.1.1.1 | ColumncpqDaPhyDrvCntlrIndex | read-only | mandatory | Drive Array Physical Drive Controller Index. This index maps the physical drive back to the controller to which it is attached. The value of this index is the … |
| 1.3.6.1.4.1.232.3.2.5.1.1.2 | ColumncpqDaPhyDrvIndex | read-only | mandatory | Drive Array Physical Drive Index. This index is used for selecting the physical drive table entry. This number, along with the cpqDaPhyDrvCntlrIndex uniquely i… |
| 1.3.6.1.4.1.232.3.2.5.1.1.3 | ColumncpqDaPhyDrvModel | read-only | mandatory | Physical Drive Model. This is a text description of the physical drive. The text that appears depends upon who manufactured the drive and the drive type. If a … |
| 1.3.6.1.4.1.232.3.2.5.1.1.4 | ColumncpqDaPhyDrvFWRev | read-only | mandatory | Physical Drive Firmware Revision. This shows the physical drive revision number. If the firmware revision is not present, you have not properly initialized the… |
| 1.3.6.1.4.1.232.3.2.5.1.1.5 | ColumncpqDaPhyDrvBay | read-only | mandatory | Physical Drive Bay Location. This value matches the bay location where the physical drive has been installed. For a SCSI drive, this is the SCSI ID of the driv… |
| 1.3.6.1.4.1.232.3.2.5.1.1.6 | ColumncpqDaPhyDrvStatus | read-only | mandatory | Physical Drive Status. This shows the status of the physical drive. The following values are valid for the physical drive status: Other (1) Indicates that the … |
| 1.3.6.1.4.1.232.3.2.5.1.1.7 | ColumncpqDaPhyDrvFactReallocs | read-only | mandatory | This shows the number of spare sectors available for remapping at the time the physical drive was shipped. The physical drive will use these spare sectors for … |
| 1.3.6.1.4.1.232.3.2.5.1.1.8 | ColumncpqDaPhyDrvUsedReallocs | read-only | mandatory | Physical Drive Used Reallocated Sectors. This shows the number of sectors of the reallocation area that have been used by the physical drive. To see how many s… |
| 1.3.6.1.4.1.232.3.2.5.1.1.9 | ColumncpqDaPhyDrvRefHours | read-only | mandatory | Reference Time in hours. This shows the total number of hours that a physical drive has been in operation since the drive was stamped. The drive will have eith… |
| 1.3.6.1.4.1.232.3.2.5.1.1.10 | ColumncpqDaPhyDrvHReads | read-only | mandatory | Sectors Read (high). The phyDrvHReads and the phyDrvReads together shows the total number of sectors read from the physical disk drive during the reference tim… |
| 1.3.6.1.4.1.232.3.2.5.1.1.11 | ColumncpqDaPhyDrvReads | read-only | mandatory | Sectors Read (low). The phyDrvHReads and the phyDrvReads together shows the total number of sectors read from the physical disk drive during the reference time… |
| 1.3.6.1.4.1.232.3.2.5.1.1.12 | ColumncpqDaPhyDrvHWrites | read-only | mandatory | Sectors Written (high). The phyDrvHWrites and the phyDrvWrites together shows the total number of sectors written to the physical disk drive during the referen… |
| 1.3.6.1.4.1.232.3.2.5.1.1.13 | ColumncpqDaPhyDrvWrites | read-only | mandatory | Sectors Written (low). The phyDrvHWrites and the phyDrvWrites together shows the total number of sectors written to the physical disk drive during the referenc… |
| 1.3.6.1.4.1.232.3.2.5.1.1.14 | ColumncpqDaPhyDrvHSeeks | read-only | mandatory | Total Seeks (high). The phyDrvHSeeks and the phyDrvSeeks together shows the total number of seek operations performed by the physical disk drive during the ref… |
| 1.3.6.1.4.1.232.3.2.5.1.1.15 | ColumncpqDaPhyDrvSeeks | read-only | mandatory | Total Seeks (low). The phyDrvHSeeks and the phyDrvSeeks together shows the total number of seek operations performed by the physical disk drive during the refe… |
| 1.3.6.1.4.1.232.3.2.5.1.1.16 | ColumncpqDaPhyDrvHardReadErrs | read-only | mandatory | Hard Read Errors. This shows the number of read errors that have occurred on a drive that could not be recovered by a physical drive`s Error Correction Code (E… |
| 1.3.6.1.4.1.232.3.2.5.1.1.17 | ColumncpqDaPhyDrvRecvReadErrs | read-only | mandatory | Recovered Read Errors. This shows the number of read errors corrected through physical drive retries during the reference time (phyDrvRefTime). Over time, all … |
| 1.3.6.1.4.1.232.3.2.5.1.1.18 | ColumncpqDaPhyDrvHardWriteErrs | read-only | mandatory | Hard Write Errors. This shows the number of write errors that could not be recovered by a physical drive during the reference time (phyDrvRefTime). Over time a… |
| 1.3.6.1.4.1.232.3.2.5.1.1.19 | ColumncpqDaPhyDrvRecvWriteErrs | read-only | mandatory | Recovered Write Errors. This shows the number of write errors corrected through physical drive retries or recovered by a physical drive during the reference ti… |
| 1.3.6.1.4.1.232.3.2.5.1.1.20 | ColumncpqDaPhyDrvHSeekErrs | read-only | mandatory | Seek Errors (High). The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the total number of times that the physical disk drive detected a seek error duri… |
| 1.3.6.1.4.1.232.3.2.5.1.1.21 | ColumncpqDaPhyDrvSeekErrs | read-only | mandatory | Seek Errors (low). The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the total number of times that the physical disk drive detected a seek error durin… |
| 1.3.6.1.4.1.232.3.2.5.1.1.22 | ColumncpqDaPhyDrvSpinupTime | read-only | mandatory | Spin up Time in tenths of seconds. This is the time it takes for a physical drive to spin up to full speed. Disks require time to gain momentum and reach opera… |
| 1.3.6.1.4.1.232.3.2.5.1.1.23 | ColumncpqDaPhyDrvFunctTest1 | read-only | deprecated | Functional Test 1. This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical dr… |
| 1.3.6.1.4.1.232.3.2.5.1.1.24 | ColumncpqDaPhyDrvFunctTest2 | read-only | deprecated | Functional Test 2. This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical dr… |
| 1.3.6.1.4.1.232.3.2.5.1.1.25 | ColumncpqDaPhyDrvFunctTest3 | read-only | deprecated | Functional Test 3. This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical dr… |
| 1.3.6.1.4.1.232.3.2.5.1.1.26 | ColumncpqDaPhyDrvDrqTimeouts | read-only | mandatory | DRQ Timeouts. The number of times that a physical drive continued to request data, but did not get a command completion during the reference time (phyDrvRefTim… |
| 1.3.6.1.4.1.232.3.2.5.1.1.27 | ColumncpqDaPhyDrvOtherTimeouts | read-only | mandatory | Other Timeouts. The number of times that a physical drive did not respond with an interrupt within a controller-defined period of time after a command had been… |
| 1.3.6.1.4.1.232.3.2.5.1.1.28 | ColumncpqDaPhyDrvSpinupRetries | read-only | mandatory | Spin up Retries. The number of times that a physical drive had to retry to spin up before successfully achieving operating speed during the reference time (phy… |
| 1.3.6.1.4.1.232.3.2.5.1.1.29 | ColumncpqDaPhyDrvBadRecvReads | read-only | mandatory | Recovery Failed (Bad) Read Error. The number of times a read error occurred while performing Automatic Data Recovery from this physical drive to another drive … |
| 1.3.6.1.4.1.232.3.2.5.1.1.30 | ColumncpqDaPhyDrvBadRecvWrites | read-only | mandatory | Recovery Failed (Bad) Write Error. The number of times a write error occurred while performing Automatic Data Recovery from another drive to this physical driv… |
| 1.3.6.1.4.1.232.3.2.5.1.1.31 | ColumncpqDaPhyDrvFormatErrs | read-only | mandatory | Format Error. The number of times a format operation failed when the controller attempted to remap a bad sector during the reference time (phyDrvRefTime). Zero… |
| 1.3.6.1.4.1.232.3.2.5.1.1.32 | ColumncpqDaPhyDrvPostErrs | read-only | mandatory | Power On Self Test (Post) Error. The number of times that a physical drive failed its self test during the reference time (phyDrvRefTime). The physical drive d… |
| 1.3.6.1.4.1.232.3.2.5.1.1.33 | ColumncpqDaPhyDrvNotReadyErrs | read-only | mandatory | Drive Not Ready Errors. The number of times the physical drive failed after the spin up command was issued during the reference time (phyDrvRefTime). When the … |
| 1.3.6.1.4.1.232.3.2.5.1.1.34 | ColumncpqDaPhyDrvReallocAborts | read-only | mandatory | Physical Drive Reallocation Aborts. The number of times the physical drive has failed due to an error that occurred when the controller was trying to reallocat… |
| 1.3.6.1.4.1.232.3.2.5.1.1.35 | ColumncpqDaPhyDrvThreshPassed | read-only | mandatory | Physical Drive Factory Threshold Passed (Exceeded). When the drive is shipped, certain thresholds have been set to monitor performance of the drives. For examp… |
| 1.3.6.1.4.1.232.3.2.5.1.1.36 | ColumncpqDaPhyDrvHasMonInfo | read-only | mandatory | Physical Drive Has Monitor Information. All of the physical disk table fields except for the physical disk status (phyDrvStatus) and the bay location (phyDrvBa… |
| 1.3.6.1.4.1.232.3.2.5.1.1.37 | ColumncpqDaPhyDrvCondition | read-only | mandatory | The condition of the device. This value represents the overall condition of this physical drive. |
| 1.3.6.1.4.1.232.3.2.5.1.1.38 | ColumncpqDaPhyDrvHotPlugs | read-only | mandatory | Physical Drive Hot Plug Count. This value indicates the number of times this physical drive was hot-plugged (removed) from a ProLiant Storage System. This is n… |
| 1.3.6.1.4.1.232.3.2.5.1.1.39 | ColumncpqDaPhyDrvMediaErrs | read-only | mandatory | Physical Drive Media Failure Count. This value indicates the number of times this physical drive was failed due to unrecoverable media errors. This is not supp… |
| 1.3.6.1.4.1.232.3.2.5.1.1.40 | ColumncpqDaPhyDrvHardwareErrs | read-only | mandatory | Physical Drive Hardware Error Count. This value indicates the number of times this physical drive returned a bad hardware status. The drive may be failed if re… |
| 1.3.6.1.4.1.232.3.2.5.1.1.41 | ColumncpqDaPhyDrvAbortedCmds | read-only | mandatory | Physical Drive Aborted Command Failures. This value indicates the number of times this physical drive was failed due to aborted commands that could not be retr… |
| 1.3.6.1.4.1.232.3.2.5.1.1.42 | ColumncpqDaPhyDrvSpinUpErrs | read-only | mandatory | Physical Drive Spin-Up Failure Count. This value indicates the number of times this physical drive was failed due to a failure of a spin-up command. This is no… |
| 1.3.6.1.4.1.232.3.2.5.1.1.43 | ColumncpqDaPhyDrvBadTargetErrs | read-only | mandatory | Physical Drive Bad Target Count. This value indicates the number of times this physical drive performed some action that did not conform to the SCSI-2 bus prot… |
| 1.3.6.1.4.1.232.3.2.5.1.1.44 | ColumncpqDaPhyDrvLocation | read-only | deprecated | Drive Physical Location. This is the physical location of where the drive is located. The following values are defined: other(1) The location of the drive is n… |
| 1.3.6.1.4.1.232.3.2.5.1.1.45 | ColumncpqDaPhyDrvSize | read-only | mandatory | Physical Drive Size in MB. This is the size of the physical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive … |
| 1.3.6.1.4.1.232.3.2.5.1.1.46 | ColumncpqDaPhyDrvBusFaults | read-only | mandatory | Physical Drive Bus Fault Count. This value indicates the number of times that a bus fault was detected for the drive by the controller. This is not supported b… |
| 1.3.6.1.4.1.232.3.2.5.1.1.47 | ColumncpqDaPhyDrvIrqDeglitches | read-only | mandatory | Physical Drive IRQ Deglitch Count. This is not supported by the IDA, IDA Expansion, or IDA-2 controllers. |
| 1.3.6.1.4.1.232.3.2.5.1.1.48 | ColumncpqDaPhyDrvHotPlug | read-only | mandatory | Physical Drive Hot Plug Support Status. The following values are defined: other(1) The Insight Agent is unable to determine if this drive supports hot plug rep… |
| 1.3.6.1.4.1.232.3.2.5.1.1.49 | ColumncpqDaPhyDrvPlacement | read-only | mandatory | Physical Drive Placement. The following values are defined: other(1) The agent is unable to determine if the drive is internal or external to the system chassi… |
| 1.3.6.1.4.1.232.3.2.5.1.1.50 | ColumncpqDaPhyDrvBusNumber | read-only | mandatory | Physical Drive SCSI Bus Number. The bus number indicates to which SCSI bus this physical drive is attached. The first instance is one and increments for each S… |
| 1.3.6.1.4.1.232.3.2.5.1.1.51 | ColumncpqDaPhyDrvSerialNum | read-only | mandatory | Physical Drive Serial Number. This is the serial number assigned to the physical drive. This value is based upon the serial number as returned by the SCSI inqu… |
| 1.3.6.1.4.1.232.3.2.5.1.1.52 | ColumncpqDaPhyDrvPreFailMonitoring | read-only | mandatory | Drive Array Physical Drive Predictive Failure Monitoring. The following values are defined: other(1) The agent is unable to determine if the drive supports pre… |
| 1.3.6.1.4.1.232.3.2.5.1.1.53 | ColumncpqDaPhyDrvCurrentWidth | read-only | mandatory | Drive Array Physical Drive Current Width. The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer widt… |
| 1.3.6.1.4.1.232.3.2.5.1.1.54 | ColumncpqDaPhyDrvCurrentSpeed | read-only | mandatory | Drive Array Physical Drive Current Data Transfer Speed. The following values are defined: other(1) The agent is unable to determine the current negotiated data… |
| 1.3.6.1.4.1.232.3.2.5.1.1.55 | ColumncpqDaPhyDrvFailureCode | read-only | mandatory | Drive Array Physical Drive Failure Code. This value is the drive failure reason code returned by the array firmware. It is valid only when the drive is failed.… |
| 1.3.6.1.4.1.232.3.2.5.1.1.56 | ColumncpqDaPhyDrvBlinkTime | read-write | mandatory | Physical Drive Blink Time Count. This value indicates the amount of time, in tenths of a second, that the physical drive LEDs will continue to blink. A value o… |
| 1.3.6.1.4.1.232.3.2.5.1.1.57 | ColumncpqDaPhyDrvSmartStatus | read-only | mandatory | Physical Drive S.M.A.R.T Status. The following values are defined: other(1) The agent is unable to determine if the status of S.M.A.R.T predictive failure moni… |
| 1.3.6.1.4.1.232.3.2.5.1.1.58 | ColumncpqDaPhyDrvConfigurationStatus | read-only | mandatory | Physical Drive Configuration Status. The following values are defined: other(1) The agent is unable to determine the configuration status of this physical driv… |
| 1.3.6.1.4.1.232.3.2.5.1.1.59 | ColumncpqDaPhyDrvRotationalSpeed | read-only | mandatory | Drive Array Physical Drive Rotational Speed. The following values are defined: other(1) The agent is unable to determine the rotational speed for this drive. r… |
| 1.3.6.1.4.1.232.3.2.5.1.1.60 | ColumncpqDaPhyDrvType | read-only | mandatory | Physical Drive Type. The following values are defined: other(1) The agent is unable to determine the type for this drive. parallelScsi(2) The drive type is par… |
| 1.3.6.1.4.1.232.3.2.5.1.1.61 | ColumncpqDaPhyDrvSataVersion | read-only | mandatory | Physical Drive SATA Version. The following values are defined: other(1) The agent is unable to determine the SATA version for this drive or it is not a SATA dr… |
| 1.3.6.1.4.1.232.3.2.5.1.1.62 | ColumncpqDaPhyDrvHostConnector | read-only | mandatory | Physical Drive Host Connector. This is the host connector to which the drive is ultimately attached. If the host connector cannot be determined, the agent will… |
| 1.3.6.1.4.1.232.3.2.5.1.1.63 | ColumncpqDaPhyDrvBoxOnConnector | read-only | mandatory | Physical Drive Box on Connector. The box on connector indicates to which box instance this physical drive belongs. The instances start at one and increment for… |
| 1.3.6.1.4.1.232.3.2.5.1.1.64 | ColumncpqDaPhyDrvLocationString | read-only | mandatory | Physical Drive Location String. This string describes the location of the drive in relation to the controller. If the location string cannot be determined, the… |
| 1.3.6.1.4.1.232.3.2.5.1.1.65 | ColumncpqDaPhyDrvNegotiatedLinkRate | read-only | mandatory | Drive Array Physical Drive Negotiated Link Rate. The following values are defined: other(1) The agent is unable to determine the negotiated link rate this driv… |
| 1.3.6.1.4.1.232.3.2.5.1.1.66 | ColumncpqDaPhyDrvNcqSupport | read-only | mandatory | Drive Array Physical Drive Native Command Queueing. The following values are defined: other(1) The agent is unable to determine the NCQ configuration for this … |
| 1.3.6.1.4.1.232.3.2.5.1.1.67 | ColumncpqDaPhyDrvPhyCount | read-only | mandatory | Drive Array Physical Drive PHY Count. This value indicates how many PHYs exist on SAS/SATA disk. For parallel SCSI disks, this value is set to -1. |
| 1.3.6.1.4.1.232.3.2.5.1.1.68 | ColumncpqDaPhyDrvMultipathAccess | read-only | mandatory | Drive Array Physical Drive Multi-path Access Status. This indicates if this physical drive has been configured to have and currently still has more than one I/… |
| 1.3.6.1.4.1.232.3.2.5.1.1.69 | ColumncpqDaPhyDrvMediaType | read-only | mandatory | Drive Array Physical Drive Media Type. The following values are defined: other(1) The instrument agent is unable to determine the media type of physical drive.… |
| 1.3.6.1.4.1.232.3.2.5.1.1.70 | ColumncpqDaPhyDrvCurrentTemperature | read-only | mandatory | Drive Array Physical Drive Current Temperature. This is the temperature of the physical drive in degrees Celsius. The field will contain -1 if the drive temper… |
| 1.3.6.1.4.1.232.3.2.5.1.1.71 | ColumncpqDaPhyDrvTemperatureThreshold | read-only | mandatory | Drive Array Physical Drive Temperature Threshold. This is the temperature in degrees Celsius at which the drive says it is overheated. The field will contain -… |
| 1.3.6.1.4.1.232.3.2.5.1.1.72 | ColumncpqDaPhyDrvMaximumTemperature | read-only | mandatory | Drive Array Physical Drive Maximum Temperature. This is the maximum temperature in degrees Celsius that the drive has reached. The field will contain -1 if the… |
| 1.3.6.1.4.1.232.3.2.5.1.1.73 | ColumncpqDaPhyDrvSSDWearStatus | read-only | mandatory | Drive Array Physical Drive Solid State Disk Wear Status. This shows the wear status of the solid state physical drive. The following values are valid for the p… |
| 1.3.6.1.4.1.232.3.2.5.1.1.74 | ColumncpqDaPhyDrvPowerOnHours | read-only | mandatory | Drive Array Physical Drive Power On Hours. This is the total number of hours that the physical disk has been powered on. This value will be 4,294,967,295 if th… |
| 1.3.6.1.4.1.232.3.2.5.1.1.75 | ColumncpqDaPhyDrvSSDPercntEndrnceUsed | read-only | mandatory | Drive Array Physical Drive Solid State Percent Endurance Used. This value specifies the hundredths of the percentage of solid state disk life used. The value o… |
| 1.3.6.1.4.1.232.3.2.5.1.1.76 | ColumncpqDaPhyDrvSSDEstTimeRemainingHours | read-only | mandatory | Drive Array Physical Drive Solid State Estimated Time Remaining In Hours. This is the estimated total number of hours that the solid state physical disk has re… |
| 1.3.6.1.4.1.232.3.2.5.1.1.77 | ColumncpqDaPhyDrvAuthenticationStatus | read-only | mandatory | Drive Array Physical Drive Authentication Status. The following values are defined: Other (1) Indicates that the instrument agent can not determine the physica… |
| 1.3.6.1.4.1.232.3.2.5.1.1.78 | ColumncpqDaPhyDrvSmartCarrierAppFWRev | read-only | mandatory | Physical Drive Smart Carrier Application Firmware Revision. This displays the physical drive smart carrier application firmware revision number. This value wil… |
| 1.3.6.1.4.1.232.3.2.5.1.1.79 | ColumncpqDaPhyDrvSmartCarrierBootldrFWRev | read-only | mandatory | Physical Drive Smart Carrier Bootloader Firmware Revision. This displays the physical drive smart carrier bootloader firmware revision number. This value will … |
| 1.3.6.1.4.1.232.3.2.5.1.1.80 | ColumncpqDaPhyDrvEncryptionStatus | read-only | mandatory | Physical Drive Encryption Status. The physical drive`s encryption status. The following values are valid: other (1) Indicates that the instrument agent does no… |
| 1.3.6.1.4.1.232.3.2.5.2 | TablecpqDaPhyDrvErrTable | not-accessible | mandatory | Drive Array Physical Drive Error Log Table. A table of physical drive entries. The Error Log Table is not supported by the IDA, IDA Expansion, or IDA-2 control… |
| 1.3.6.1.4.1.232.3.2.5.2.1 | RowcpqDaPhyDrvErrEntry | not-accessible | mandatory | Drive Array Physical Drive Entry. |
| 1.3.6.1.4.1.232.3.2.5.2.1.1 | ColumncpqDaPhyDrvErrCntlrIndex | read-only | mandatory | Drive Array Physical Drive Error Log Controller Index. This index maps the physical drive back to the controller to which it is attached. The value of this ind… |
| 1.3.6.1.4.1.232.3.2.5.2.1.2 | ColumncpqDaPhyDrvErrIDIndex | read-only | mandatory | Drive Array Physical Drive Error Log Index. This index is used for selecting the physical drive table entry. This number, along with the cpqDaPhyDrvErrCntlrInd… |
| 1.3.6.1.4.1.232.3.2.5.2.1.3 | ColumncpqDaPhyDrvErrIndex | read-only | mandatory | Drive Array Physical Drive Error Log Index. This index is used for selecting the physical drive table entry. This number, along with the cpqDaPhyDrvErrCntlrInd… |
| 1.3.6.1.4.1.232.3.2.5.2.1.4 | ColumncpqDaPhyDrvErrType | read-only | mandatory | Physical Drive Error Log Error Type. The type of error in the error log. The valid types are: Other (1) Indicates that the instrument agent does not recognize … |
| 1.3.6.1.4.1.232.3.2.5.2.1.5 | ColumncpqDaPhyDrvScsiOp | read-only | mandatory | Physical Drive Error Log SCSI Operation. This is the SCSI Command Operation Code byte associated with the error log entry. For further specifications consult a… |
| 1.3.6.1.4.1.232.3.2.5.2.1.6 | ColumncpqDaPhyDrvScsiStatus | read-only | mandatory | Physical Drive Error Log SCSI Status. This is the SCSI Status Code byte associated with the error log entry. For further specifications consult a SCSI-2 logica… |
| 1.3.6.1.4.1.232.3.2.5.2.1.7 | ColumncpqDaPhyDrvCamStatus | read-only | mandatory | Physical Drive Error Log CAM Status. This is the SCSI CAM Status byte associated with the error log entry. For further specifications consult a SCSI-2 logical … |
| 1.3.6.1.4.1.232.3.2.5.2.1.8 | ColumncpqDaPhyDrvSenseKey | read-only | mandatory | Physical Drive Error Log Sense Key. This is the SCSI Sense Key byte associated with the error log entry. For further specifications consult a SCSI-2 logical sp… |
| 1.3.6.1.4.1.232.3.2.5.2.1.9 | ColumncpqDaPhyDrvQualifier | read-only | mandatory | Physical Drive Error Log Qualifier. This is the SCSI Additional Sense Code Qualifier byte (as returned by the Request Sense command) associated with the error … |
| 1.3.6.1.4.1.232.3.2.5.2.1.10 | ColumncpqDaPhyDrvSenseCode | read-only | mandatory | Physical Drive Error Log Sense Code. This is the SCSI Sense Code associated with the error log entry. For further specifications consult a SCSI-2 logical speci… |
| 1.3.6.1.4.1.232.3.2.5.2.1.11 | ColumncpqDaPhyDrvBlockValid | read-only | mandatory | Physical Drive Error Log Block Address Is Valid. The valid values are: False (1) Indicates that the Block Address object (cpqDaPhyDrvBlock) is not a valid addr… |
| 1.3.6.1.4.1.232.3.2.5.2.1.12 | ColumncpqDaPhyDrvBlock | read-only | mandatory | Physical Drive Error Log Block Address. This is the SCSI Block Address (as returned by the Request Sense Command) associated with the error log entry. For furt… |
| 1.3.6.1.4.1.232.3.2.5.2.1.13 | ColumncpqDaPhyDrvTime | read-only | mandatory | Physical Drive Error Log Reference Time. This gives a relative time stamp as to when the error log entry occurred. The Reference Time shows the number of hours… |
| 1.3.6.1.4.1.232.3.2.5.2.1.14 | ColumncpqDaPhyDrvUserDesc | read-only | deprecated | Physical Drive Error Log User Description. This is a string built by the agent which contains the Reference Time (cpqDaPhyDrvTime) and a brief description of t… |
| 1.3.6.1.4.1.232.3.2.5.2.1.15 | ColumncpqDaPhyDrvErrDesc | read-only | mandatory | The index used to display an error associated with a physical drive. This number refers to an entry in a list of error strings enumerating the possible physica… |
| 1.3.6.1.4.1.232.3.2.5.3 | TablecpqDaPhyDrvPathTable | not-accessible | mandatory | Drive Array Physical Drive Access Path Table. A table of access path entries supporting physical drive multi-path cabling configuration. |
| 1.3.6.1.4.1.232.3.2.5.3.1 | RowcpqDaPhyDrvPathEntry | not-accessible | mandatory | Drive Array Physical Drive Access Path Entry. |
| 1.3.6.1.4.1.232.3.2.5.3.1.1 | ColumncpqDaPhyDrvPathCntlrIndex | read-only | mandatory | Drive Array Physical Drive Access Path Controller Index. This index maps the physical drive access path back to the controller to which it is attached. The val… |
| 1.3.6.1.4.1.232.3.2.5.3.1.2 | ColumncpqDaPhyDrvPathDrvIndex | read-only | mandatory | Drive Array Physical Drive Access Path Drive Index. This index maps the access path to a physical drive. |
| 1.3.6.1.4.1.232.3.2.5.3.1.3 | ColumncpqDaPhyDrvPathIndex | read-only | mandatory | Drive Array Physical Drive Access Path Index. This path index keeps track of multiple instances of access paths from a controller to a physical drive. This num… |
| 1.3.6.1.4.1.232.3.2.5.3.1.4 | ColumncpqDaPhyDrvPathStatus | read-only | mandatory | Physical Drive Access Path Status. This shows the status of the physical drive access path. The following values are valid: Other (1) Indicates that the instru… |
| 1.3.6.1.4.1.232.3.2.5.3.1.5 | ColumncpqDaPhyDrvPathCurrentRole | read-only | mandatory | Physical Drive Access Path Current Role. This shows the current role of physical drive access path. The following values are valid: Other (1) Indicates that th… |
| 1.3.6.1.4.1.232.3.2.5.3.1.6 | ColumncpqDaPhyDrvPathHostConnector | read-only | mandatory | Physical Drive Access Path Host Connector. This is the host connector to which the access path is ultimately attached. If the host connector cannot be determin… |
| 1.3.6.1.4.1.232.3.2.5.3.1.7 | ColumncpqDaPhyDrvPathBoxOnConnector | read-only | mandatory | Physical Drive Access Path Box on Connector. The box on connector indicates to which box instance this physical drive access path belongs. |
| 1.3.6.1.4.1.232.3.2.5.3.1.8 | ColumncpqDaPhyDrvPathLocationString | read-only | mandatory | Physical Drive Access Path Location String. This string describes the physical drive access path in relation to the controller. If the location string cannot b… |
| 1.3.6.1.4.1.232.3.2.6 | NodecpqDaPhyDrvThr | |||
| 1.3.6.1.4.1.232.3.2.6.1 | TablecpqDaPhyDrvThrTable | not-accessible | mandatory | Drive Array Physical Drive Threshold Table. A table of physical drive threshold entries. |
| 1.3.6.1.4.1.232.3.2.6.1.1 | RowcpqDaPhyDrvThrEntry | not-accessible | mandatory | Drive Array Physical Drive Threshold Entry. A physical drive threshold entry. |
| 1.3.6.1.4.1.232.3.2.6.1.1.1 | ColumncpqDaPhyDrvThrCntlrIndex | read-only | mandatory | Drive Array Physical Drive Threshold Controller Index. This index maps the physical drive thresholds back to the controller to which it is attached. The value … |
| 1.3.6.1.4.1.232.3.2.6.1.1.2 | ColumncpqDaPhyDrvThrIndex | read-only | mandatory | Drive Array Physical Drive Threshold Index. This index maps the thresholds to a physical drive. The value of this index is the same as the one used with the ph… |
| 1.3.6.1.4.1.232.3.2.6.1.1.3 | ColumncpqDaPhyDrvThrUsedReallocs | read-only | mandatory | Used Reallocated Sectors Maximum Threshold. This shows the maximum threshold of the reallocation area that has been used by the physical drive. This threshold … |
| 1.3.6.1.4.1.232.3.2.6.1.1.4 | ColumncpqDaPhyDrvThrRefHours | read-only | mandatory | Reference Time Maximum Threshold in hours. This shows the maximum threshold in hours that a physical drive has been spinning since the drive was stamped. This … |
| 1.3.6.1.4.1.232.3.2.6.1.1.5 | ColumncpqDaPhyDrvThrHardReadErrs | read-only | mandatory | Hard Read Errors Maximum Threshold. This shows the maximum threshold of read errors on a drive that could not be recovered by a physical drive`s Error Correcti… |
| 1.3.6.1.4.1.232.3.2.6.1.1.6 | ColumncpqDaPhyDrvThrRecvReadErrs | read-only | mandatory | Recovered Read Errors Maximum Threshold. This shows the maximum threshold of read errors corrected through physical drive retries during the reference time (ph… |
| 1.3.6.1.4.1.232.3.2.6.1.1.7 | ColumncpqDaPhyDrvThrHardWriteErrs | read-only | mandatory | Hard Write Errors Maximum Threshold. This shows the maximum threshold of write errors that could not be recovered by a physical drive during the reference time… |
| 1.3.6.1.4.1.232.3.2.6.1.1.8 | ColumncpqDaPhyDrvThrRecvWriteErrs | read-only | mandatory | Recovered Write Errors Maximum Threshold. This shows the maximum threshold of write errors corrected through physical drive retries or recovered by a physical … |
| 1.3.6.1.4.1.232.3.2.6.1.1.9 | ColumncpqDaPhyDrvThrHSeekErrs | read-only | mandatory | Seek Errors Maximum Threshold (high). The cpqDaphyDrvThrHSeekErrs and the cpqDaphyDrvThrSeekErrs together show the maximum threshold of total number of times t… |
| 1.3.6.1.4.1.232.3.2.6.1.1.10 | ColumncpqDaPhyDrvThrSeekErrs | read-only | mandatory | Seek Errors Maximum Threshold (low). The cpqDaphyDrvThrHSeekErrs and the cpqDaphyDrvThrSeekErrs together show the maximum threshold of total number of times th… |
| 1.3.6.1.4.1.232.3.2.6.1.1.11 | ColumncpqDaPhyDrvThrSpinupTime | read-only | mandatory | Spin up Time Maximum Threshold in tenths of seconds. This shows the maximum of time it takes for a physical drive to spin up to full speed. This threshold is a… |
| 1.3.6.1.4.1.232.3.2.6.1.1.12 | ColumncpqDaPhyDrvThrFunctTest1 | read-only | deprecated | Functional Test 1 Minimum Threshold. This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works.… |
| 1.3.6.1.4.1.232.3.2.6.1.1.13 | ColumncpqDaPhyDrvThrFunctTest2 | read-only | deprecated | Functional Test 2 Minimum Threshold. This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works.… |
| 1.3.6.1.4.1.232.3.2.6.1.1.14 | ColumncpqDaPhyDrvThrFunctTest3 | read-only | deprecated | Functional Test 3 Minimum Threshold. This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works.… |
| 1.3.6.1.4.1.232.3.2.6.1.1.15 | ColumncpqDaPhyDrvThrDrqTimeouts | read-only | mandatory | DRQ Timeouts Maximum Threshold. This shows the maximum threshold of the number of times that a physical drive continued to request data, but did not get a comm… |
| 1.3.6.1.4.1.232.3.2.6.1.1.16 | ColumncpqDaPhyDrvThrOtherTimeouts | read-only | mandatory | Other Timeouts Maximum Threshold. This shows the maximum threshold of the number of times that a physical drive did not respond with an interrupt within a cont… |
| 1.3.6.1.4.1.232.3.2.6.1.1.17 | ColumncpqDaPhyDrvThrSpinupRetries | read-only | mandatory | Spin up Retries Maximum Threshold. This shows the maximum threshold of the number of times that a physical drive had to retry to spin up before successfully ac… |
| 1.3.6.1.4.1.232.3.2.6.1.1.18 | ColumncpqDaPhyDrvThrBadRecvReads | read-only | mandatory | Recovery Failed (Bad) Read Error Maximum Threshold. This shows the maximum threshold of the number of times a read error occurred while performing Automatic Da… |
| 1.3.6.1.4.1.232.3.2.6.1.1.19 | ColumncpqDaPhyDrvThrBadRecvWrites | read-only | mandatory | Recovery Failed (Bad) Write Error Maximum Threshold. This shows the maximum threshold of the number of times a write error occurred while performing Automatic … |
| 1.3.6.1.4.1.232.3.2.6.1.1.20 | ColumncpqDaPhyDrvThrFormatErrs | read-only | mandatory | Format Error Maximum Threshold. This shows the maximum threshold of the number of times a format operation failed when the controller attempted to remap a bad … |
| 1.3.6.1.4.1.232.3.2.6.1.1.21 | ColumncpqDaPhyDrvThrPostErrs | read-only | mandatory | Power On Self Test (Post) Error Maximum Threshold. This shows the maximum threshold of the number of times that a physical drive failed its self test during th… |
| 1.3.6.1.4.1.232.3.2.6.1.1.22 | ColumncpqDaPhyDrvThrNotReadyErrs | read-only | mandatory | Drive Not Ready Errors Maximum Threshold. This shows the maximum threshold of the number of times the physical drive failed after the spin up command was issue… |
| 1.3.6.1.4.1.232.3.2.6.1.1.23 | ColumncpqDaPhyDrvThrReallocAborts | read-only | mandatory | Physical Drive Reallocation Aborts Maximum Threshold. This shows the maximum threshold of the number of times the physical drive has failed due to an error tha… |
| 1.3.6.1.4.1.232.3.2.6.1.1.24 | ColumncpqDaPhyDrvThrHotPlugs | read-only | mandatory | Physical Drive Hot Plug Count Maximum Threshold. This shows the maximum threshold of the number of times this physical drive can be hot-plugged (removed) from … |
| 1.3.6.1.4.1.232.3.2.6.1.1.25 | ColumncpqDaPhyDrvThrMediaErrs | read-only | mandatory | Physical Drive Media Failure Count Maximum Threshold. This shows the maximum threshold of the number of times this physical drive can be failed due to unrecove… |
| 1.3.6.1.4.1.232.3.2.6.1.1.26 | ColumncpqDaPhyDrvThrHardwareErrs | read-only | mandatory | Physical Drive Hardware Error Count Maximum Threshold. This shows the maximum threshold of the number of times this physical drive can return a bad hardware st… |
| 1.3.6.1.4.1.232.3.2.6.1.1.27 | ColumncpqDaPhyDrvThrAbortedCmds | read-only | mandatory | Physical Drive Aborted Command Failures Maximum Threshold. This shows the maximum threshold of the number of times this physical drive can be failed due to abo… |
| 1.3.6.1.4.1.232.3.2.6.1.1.28 | ColumncpqDaPhyDrvThrSpinUpErrs | read-only | mandatory | Physical Drive Spin-Up Failure Count Maximum Threshold. This shows the maximum threshold of the number of times this physical drive was failed due to a failure… |
| 1.3.6.1.4.1.232.3.2.6.1.1.29 | ColumncpqDaPhyDrvThrBadTargetErrs | read-only | mandatory | Physical Drive Bad Target Count Maximum Threshold. This shows the maximum threshold of the number of times this physical drive can perform some action that did… |
| 1.3.6.1.4.1.232.3.2.6.1.1.30 | ColumncpqDaPhyDrvThrViUsedReallocs | read-only | mandatory | Used Reallocated Sectors Threshold Has Been Violated. This is used to indicate whether the number of used sectors of the reallocation area for a physical drive… |
| 1.3.6.1.4.1.232.3.2.6.1.1.31 | ColumncpqDaPhyDrvThrViSpinupTime | read-only | mandatory | Spin up Time in tenths of seconds Threshold Has Been Violated. This is used to indicate whether the time it took for a physical drive to spin up to full speed … |
| 1.3.6.1.4.1.232.3.2.6.1.1.32 | ColumncpqDaPhyDrvThrViFunctTest1 | read-only | mandatory | Functional Test 1 Threshold Has Been Violated. This is used to indicate whether the percentage value returned from Functional Test 1 has every dropped below th… |
| 1.3.6.1.4.1.232.3.2.6.1.1.33 | ColumncpqDaPhyDrvThrViFunctTest2 | read-only | mandatory | Functional Test 2 Threshold Has Been Violated. This is used to indicate whether the percentage value returned from Functional Test 2 has every dropped below th… |
| 1.3.6.1.4.1.232.3.2.6.1.1.34 | ColumncpqDaPhyDrvThrViFunctTest3 | read-only | mandatory | Functional Test 3 Threshold Has Been Violated. This is used to indicate whether the percentage value returned from Functional Test 3 has every dropped below th… |
| 1.3.6.1.4.1.232.3.2.6.1.1.35 | ColumncpqDaPhyDrvThrBusFaults | read-only | mandatory | Physical Drive Bus Fault Count Maximum Threshold. This shows the maximum threshold of the number of times this physical drive can return a bus fault status. Th… |
| 1.3.6.1.4.1.232.3.2.6.1.1.36 | ColumncpqDaPhyDrvThrIrqDeglitches | read-only | mandatory | Physical Drive IRQ Deglitch Count Maximum Threshold. This shows the maximum threshold of the number of times this physical drive can return a IRQ deglitch stat… |
| 1.3.6.1.4.1.232.3.2.7 | NodecpqDaCntlrPerf | |||
| 1.3.6.1.4.1.232.3.2.7.1 | TablecpqDaCntlrPerfTable | not-accessible | mandatory | Drive Array Controller Performance Monitor Table. A table of controller entries supporting the performance monitor information. |
| 1.3.6.1.4.1.232.3.2.7.1.1 | RowcpqDaCntlrPerfEntry | not-accessible | mandatory | Drive Array Controller Performance Monitor Entry. A performance monitor entry. |
| 1.3.6.1.4.1.232.3.2.7.1.1.1 | ColumncpqDaCntlrPerfCntlrIndex | read-only | mandatory | Drive Array Controller Performance Monitor Controller Index. This maps the performance monitor information into their respective controllers which support perf… |
| 1.3.6.1.4.1.232.3.2.7.1.1.2 | ColumncpqDaCntlrPerfInstance | read-only | mandatory | Drive Array Controller Performance Monitor Instance Index. This maps the performance monitor information for a specific controller and sample interval to contr… |
| 1.3.6.1.4.1.232.3.2.7.1.1.3 | ColumncpqDaCntlrPerfSampleInterval | read-only | mandatory | Array Controller Performance Monitor Sample Interval. This value indicates the length of the performance interval for this controller and all logical volumes a… |
| 1.3.6.1.4.1.232.3.2.7.1.1.4 | ColumncpqDaCntlrPerfVersion | read-only | mandatory | Array Controller Performance Monitor Version. This value specifies the version of the performance monitor interface. |
| 1.3.6.1.4.1.232.3.2.7.1.1.5 | ColumncpqDaCntlrPerfCpuPercentBusy | read-only | mandatory | Array Controller Performance Monitor Cpu Percent Busy. This value specifies the total CPU percent busy as a number from 0 to 100 inclusive. If the value cannot… |
| 1.3.6.1.4.1.232.3.2.7.1.1.6 | ColumncpqDaCntlrPerfCommandCount | read-only | mandatory | Array Controller Performance Monitor Command Count. This value shows the total number of read and write commands processed in this sample. This value is expres… |
| 1.3.6.1.4.1.232.3.2.7.1.1.7 | ColumncpqDaCntlrPerfAvgLatency | read-only | mandatory | Array Controller Performance Monitor Average Command Latency. This value shows the average command latency for this sample in 1/100,000 second units. |
| 1.3.6.1.4.1.232.3.2.8 | NodecpqDaLogDrvPerf | |||
| 1.3.6.1.4.1.232.3.2.8.1 | TablecpqDaLogDrvPerfTable | not-accessible | mandatory | Drive Array Logical Drive Performance Monitor Table. A table of logical drive entries supporting the performance monitor information. |
| 1.3.6.1.4.1.232.3.2.8.1.1 | RowcpqDaLogDrvPerfEntry | not-accessible | mandatory | Drive Array Logical Drive Performance Monitor Entry. A performance monitor entry. |
| 1.3.6.1.4.1.232.3.2.8.1.1.1 | ColumncpqDaLogDrvPerfCntlrIndex | read-only | mandatory | Drive Array Logical Drive Performance Monitor Controller Index. This maps the performance monitor information into their respective controllers which support p… |
| 1.3.6.1.4.1.232.3.2.8.1.1.2 | ColumncpqDaLogDrvPerfIndex | read-only | mandatory | Drive Array Logical Drive Performance Monitor Drive Index. This maps the performance monitor information into their respective logical drives which support per… |
| 1.3.6.1.4.1.232.3.2.8.1.1.3 | ColumncpqDaLogDrvPerfInstance | read-only | mandatory | Drive Array Logical Drive Performance Monitor Instance Index. This maps the performance monitor information for a specific controller, logical drive and sample… |
| 1.3.6.1.4.1.232.3.2.8.1.1.4 | ColumncpqDaLogDrvPerfSampleInterval | read-only | mandatory | Array Logical Drive Performance Monitor Sample Interval. This value indicates the length of the performance interval for this controller and all logical volume… |
| 1.3.6.1.4.1.232.3.2.8.1.1.5 | ColumncpqDaLogDrvPerfAvgQueueDepth | read-only | mandatory | Array Logical Drive Performance Monitor Average Queue Depth. This value indicates the average command queue depth of the logical volume. |
| 1.3.6.1.4.1.232.3.2.8.1.1.6 | ColumncpqDaLogDrvPerfReads | read-only | mandatory | Array Logical Drive Performance Monitor Reads. This value is the count of read requests for the logical volume expressed in reads per second. |
| 1.3.6.1.4.1.232.3.2.8.1.1.7 | ColumncpqDaLogDrvPerfWrites | read-only | mandatory | Array Logical Drive Performance Monitor Writes. This value is the count of write requests for the logical volume expressed in writes per second. |
| 1.3.6.1.4.1.232.3.2.8.1.1.8 | ColumncpqDaLogDrvPerfTotalIO | read-only | mandatory | Array Logical Drive Performance Monitor Total I/O. This value shows the total number of read and write requests for the logical volume expressed in reads and w… |
| 1.3.6.1.4.1.232.3.2.8.1.1.9 | ColumncpqDaLogDrvPerfCacheHits | read-only | mandatory | Array Logical Drive Performance Monitor Cache Hits. This value shows the total number of read cache hits for the logical volume. This value is expressed in cac… |
| 1.3.6.1.4.1.232.3.2.8.1.1.10 | ColumncpqDaLogDrvPerfCacheMisses | read-only | mandatory | Array Logical Drive Performance Monitor Cache Misses. This value shows the total number of read cache misses for the logical volume. This value is expressed in… |
| 1.3.6.1.4.1.232.3.2.8.1.1.11 | ColumncpqDaLogDrvPerfReadAheadSectors | read-only | mandatory | Array Logical Drive Performance Monitor Read Ahead Sectors. This value shows the total number read ahead sectors pre-fetched for the logical volume for this in… |
| 1.3.6.1.4.1.232.3.2.8.1.1.12 | ColumncpqDaLogDrvPerfSectorsRead | read-only | mandatory | Array Logical Drive Performance Monitor Sectors Read. This value shows the number of sectors read for the logical volume for this interval. This value is expre… |
| 1.3.6.1.4.1.232.3.2.8.1.1.13 | ColumncpqDaLogDrvPerfSectorsWritten | read-only | mandatory | Array Logical Drive Performance Monitor Sectors Written. This value shows the number of sectors written for the logical volume for this interval. This value is… |
| 1.3.6.1.4.1.232.3.2.9 | NodecpqDaTapeDrv | |||
| 1.3.6.1.4.1.232.3.2.9.1 | TablecpqDaTapeDrvTable | not-accessible | mandatory | Drive Array Tape Drive Table. A table of tape drive entries. |
| 1.3.6.1.4.1.232.3.2.9.1.1 | RowcpqDaTapeDrvEntry | not-accessible | mandatory | Drive Array Tape Drive Entry. A tape drive entry. |
| 1.3.6.1.4.1.232.3.2.9.1.1.1 | ColumncpqDaTapeDrvCntlrIndex | read-only | mandatory | Drive Array Tape Drive Controller Index. This index maps the tape drive back to the controller to which it is attached. The value of this index is the same as … |
| 1.3.6.1.4.1.232.3.2.9.1.1.2 | ColumncpqDaTapeDrvBusIndex | read-only | mandatory | Drive Array Tape Drive SCSI Bus Index. This is the controller SCSI bus to which the tape drive is attached. |
| 1.3.6.1.4.1.232.3.2.9.1.1.3 | ColumncpqDaTapeDrvScsiIdIndex | read-only | mandatory | Drive Array Tape Drive SCSI Index. This is the SCSI Target Id of the tape drive. |
| 1.3.6.1.4.1.232.3.2.9.1.1.4 | ColumncpqDaTapeDrvLunIndex | read-only | mandatory | Drive Array Tape Drive Logical Unit Number Index. This is the logical unit number of the tape drive. |
| 1.3.6.1.4.1.232.3.2.9.1.1.5 | ColumncpqDaTapeDrvName | read-only | mandatory | Drive Array Tape Drive Model Name. This is the model name of the tape drive. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.3.2.9.1.1.6 | ColumncpqDaTapeDrvSerialNumber | read-only | mandatory | Drive Array Tape Drive Serial Number. This is the unit serial number for the tape drive. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.3.2.9.1.1.7 | ColumncpqDaTapeDrvFwRev | read-only | mandatory | Drive Array Tape Drive Firmware Revision. This is firmware revision level of the tape drive. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.3.2.9.1.1.8 | ColumncpqDaTapeDrvStatus | read-only | mandatory | Drive Array Tape Drive Status. The tape drive can be in one of the following states: other(1) The tape drive is in a state other than one of those listed below… |
| 1.3.6.1.4.1.232.3.2.9.1.1.9 | ColumncpqDaTapeDrvCondition | read-only | mandatory | Drive Array Tape Drive Condition. This value represents the overall condition of the tape drive. |
| 1.3.6.1.4.1.232.3.2.9.1.1.10 | ColumncpqDaTapeDrvFwSubtype | read-only | mandatory | Drive Array Tape Drive Firmware Subtype. This is used to differentiate the firmware versions which have the same tape drive type (as specified by cpqDaTapeDrvT… |
| 1.3.6.1.4.1.232.3.2.9.1.1.11 | ColumncpqDaTapeDrvType | read-only | mandatory | Drive Array Tape Drive Type. This is the drives model, and can be used for identification purposes. The following values are defined: other(1) The management a… |
| 1.3.6.1.4.1.232.3.2.9.1.1.12 | ColumncpqDaTapeDrvCleanReq | read-only | mandatory | Drive Array Tape Drive Cleaning Required. This is an indication of whether the tape drive heads require a cleaning session to occur. If this variable indicates… |
| 1.3.6.1.4.1.232.3.2.9.1.1.13 | ColumncpqDaTapeDrvCleanTapeRepl | read-only | mandatory | Drive Array Tape Drive Cleaning Tape Replacement. This variable is only applicable to autoloader tape drives. This variable indicates whether the cleaning tape… |
| 1.3.6.1.4.1.232.3.2.9.1.1.14 | ColumncpqDaTapeDrvCleanTapeCount | read-only | mandatory | Drive Array Tape Drive Cleaning Tape Count. This variable is a count from a tape drive of the number of cleanings done by the tape cleaner last in the drive. |
| 1.3.6.1.4.1.232.3.2.9.1.1.15 | ColumncpqDaTapeDrvLibraryDrive | read-only | mandatory | Drive Array Tape Drive Library Drive. This variable indicates whether or not the tape drive is part of a tape library. It can be in one of the following states… |
| 1.3.6.1.4.1.232.3.2.9.1.1.16 | ColumncpqDaTapeDrvMagSize | read-only | mandatory | Tape Physical Drive Magazine Size. This variable indicates the number of tape slots available in the tape autoloader magazine cartridge that is currently loade… |
| 1.3.6.1.4.1.232.3.2.9.1.1.17 | ColumncpqDaTapeDrvHotPlug | read-only | mandatory | Drive Array Tape Drive Hot Plug Support Status. The following values are defined: other(1) The agent is unable to determine if this drive supports hot plug rep… |
| 1.3.6.1.4.1.232.3.2.9.1.1.18 | ColumncpqDaTapeDrvPlacement | read-only | mandatory | Drive Array Tape Drive Placement. The following values are defined: other(1) The agent is unable to determine if the tape drive is internal or external to the … |
| 1.3.6.1.4.1.232.3.2.9.1.1.19 | ColumncpqDaTapeDrvCurrentWidth | read-only | mandatory | Drive Array Tape Drive Current Width. The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer width fo… |
| 1.3.6.1.4.1.232.3.2.9.1.1.20 | ColumncpqDaTapeDrvCurrentSpeed | read-only | mandatory | Drive Array Tape Drive Current Data Transfer Speed. The following values are defined: other(1) The agent is unable to determine the current negotiated data tra… |
| 1.3.6.1.4.1.232.3.2.9.1.1.21 | ColumncpqDaTapeDrvProtocol | read-only | mandatory | Drive Array Tape Drive Protocol. The following values are defined: other(1) The agent is unable to determine the protocol for this drive. parallelScsi(2) The d… |
| 1.3.6.1.4.1.232.3.2.9.1.1.22 | ColumncpqDaTapeDrvNegotiatedLinkRate | read-only | mandatory | Drive Array Tape Drive Negotiated Link Rate. The following values are defined: other(1) The agent is unable to determine the negotiated link rate this drive. r… |
| 1.3.6.1.4.1.232.3.2.10 | NodecpqDaTapeCounters | |||
| 1.3.6.1.4.1.232.3.2.10.1 | TablecpqDaTapeCountersTable | not-accessible | mandatory | Drive Array Tape Counters Table. |
| 1.3.6.1.4.1.232.3.2.10.1.1 | RowcpqDaTapeCountersEntry | not-accessible | mandatory | Drive Array Tape Counters Entry. |
| 1.3.6.1.4.1.232.3.2.10.1.1.1 | ColumncpqDaTapeCountersCntlrIndex | read-only | mandatory | Drive Array Tape Counters Controller Index. This index maps the tape drive back to the controller to which it is attached. The value of this index is the same … |
| 1.3.6.1.4.1.232.3.2.10.1.1.2 | ColumncpqDaTapeCountersBusIndex | read-only | mandatory | Drive Array Tape Counters Scsi Bus Index. This is the controller SCSI bus to which the tape drive is attached. |
| 1.3.6.1.4.1.232.3.2.10.1.1.3 | ColumncpqDaTapeCountersScsiIdIndex | read-only | mandatory | Drive Array Tape Counters SCSI Index. This is the SCSI Target Id of the tape drive. |
| 1.3.6.1.4.1.232.3.2.10.1.1.4 | ColumncpqDaTapeCountersLunIndex | read-only | mandatory | Drive Array Tape Counters Logical Unit Number Index. This is the logical unit number of the tape drive. |
| 1.3.6.1.4.1.232.3.2.10.1.1.5 | ColumncpqDaTapeCountersReWrites | read-only | mandatory | Tape Device Re-write count. This is the number of times blocks had to be re-written to the device. This value is maintained since the Tape Hardware Interface d… |
| 1.3.6.1.4.1.232.3.2.10.1.1.6 | ColumncpqDaTapeCountersReReads | read-only | mandatory | Tape Device Re-read count. This is the number of times blocks had to be re-read from the device. This value is maintained since the Tape Hardware Interface dri… |
| 1.3.6.1.4.1.232.3.2.10.1.1.7 | ColumncpqDaTapeCountersTotalErrors | read-only | mandatory | Tape Device Total Errors. This is the total number of read/write errors encountered. This value is maintained since the Tape Hardware Interface driver was load… |
| 1.3.6.1.4.1.232.3.2.10.1.1.8 | ColumncpqDaTapeCountersTotalUncorrectable | read-only | mandatory | Tape Device Total Uncorrectable Errors. This is the total number of read and write errors which could not be corrected. This value is maintained since the Tape… |
| 1.3.6.1.4.1.232.3.2.10.1.1.9 | ColumncpqDaTapeCountersTotalBytes | read-only | mandatory | Tape Device Total Bytes. This is the number total number of bytes read/written to the tape currently installed in the device. This value is reset whenever a ne… |
| 1.3.6.1.4.1.232.3.2.11 | NodecpqDaTapeLibrary | |||
| 1.3.6.1.4.1.232.3.2.11.1 | TablecpqDaTapeLibraryTable | not-accessible | mandatory | Drive Array Tape Library Table. |
| 1.3.6.1.4.1.232.3.2.11.1.1 | RowcpqDaTapeLibraryEntry | not-accessible | mandatory | Drive Array Tape Library Entry. |
| 1.3.6.1.4.1.232.3.2.11.1.1.1 | ColumncpqDaTapeLibraryCntlrIndex | read-only | mandatory | Drive Array Tape Library Controller Index. This index maps the tape library back to the controller to which it is attached. The value of this index is the same… |
| 1.3.6.1.4.1.232.3.2.11.1.1.2 | ColumncpqDaTapeLibraryScsiBus | read-only | mandatory | Drive Array Tape Library Scsi Bus. The bus index indicates to which SCSI bus instance on a controller this table entry belongs. The instances start at one and … |
| 1.3.6.1.4.1.232.3.2.11.1.1.3 | ColumncpqDaTapeLibraryScsiTarget | read-only | mandatory | Drive Array Tape Library Scsi Target. The target index indicates to which SCSI ID on a controller SCSI bus this table entry belongs. |
| 1.3.6.1.4.1.232.3.2.11.1.1.4 | ColumncpqDaTapeLibraryScsiLun | read-only | mandatory | Drive Array Tape Library Scsi Lun. The Lun index indicates to which logical unit on a SCSI ID on a controller SCSI bus this table entry belongs. |
| 1.3.6.1.4.1.232.3.2.11.1.1.5 | ColumncpqDaTapeLibrarySerialNumber | read-only | mandatory | Drive Array Tape Library Serial Number. This is the unit serial number for the tape library. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.3.2.11.1.1.6 | ColumncpqDaTapeLibraryModel | read-only | mandatory | Drive Array Tape Library Model. This is the model name of the tape library. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.3.2.11.1.1.7 | ColumncpqDaTapeLibraryFWRev | read-only | mandatory | Drive Array Tape Library Serial Number. This is firmware revision level of the tape library. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.3.2.11.1.1.8 | ColumncpqDaTapeLibraryStatus | read-only | mandatory | Drive Array Tape Library Status. The library can be in one of the following states: other(1) The library is in a state other than one of those listed below. ok… |
| 1.3.6.1.4.1.232.3.2.11.1.1.9 | ColumncpqDaTapeLibraryDoorStatus | read-only | mandatory | Drive Array Tape Library Door Status. The door can be in one of the following states: other(1) The door is in a state other than one of those listed below. not… |
| 1.3.6.1.4.1.232.3.2.11.1.1.10 | ColumncpqDaTapeLibraryCondition | read-only | mandatory | Drive Array Tape Library Condition. This value represents the overall condition of the tape library. |
| 1.3.6.1.4.1.232.3.2.11.1.1.11 | ColumncpqDaTapeLibraryOverallCondition | read-only | mandatory | Drive Array Tape Library Overall Condition. This value represents the overall condition of the tape library and any associated tape drives. |
| 1.3.6.1.4.1.232.3.2.11.1.1.12 | ColumncpqDaTapeLibraryLastError | read-only | deprecated | Drive Array Tape Library Last Error. This is the last error returned by the tape library. |
| 1.3.6.1.4.1.232.3.2.11.1.1.13 | ColumncpqDaTapeLibraryStatHours | read-only | mandatory | Drive Array Tape Library Stat Hours. This is the number of hours of operation for the library. |
| 1.3.6.1.4.1.232.3.2.11.1.1.14 | ColumncpqDaTapeLibraryStatMoves | read-only | mandatory | Drive Array Tape Library Stat Moves. This is the number of tape moves for the library loader arm. |
| 1.3.6.1.4.1.232.3.2.11.1.1.15 | ColumncpqDaTapeLibraryDriveList | read-only | deprecated | Drive Array Tape Library Tape Drive List. This is a data structure containing the list of tape drive ids that are present in this library. The format is: field… |
| 1.3.6.1.4.1.232.3.2.11.1.1.16 | ColumncpqDaTapeLibraryCurrentWidth | read-only | mandatory | Drive Array Tape Library Current Width. The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer width … |
| 1.3.6.1.4.1.232.3.2.11.1.1.17 | ColumncpqDaTapeLibraryCurrentSpeed | read-only | mandatory | Drive Array Tape Library Current Data Transfer Speed. The following values are defined: other(1) The agent is unable to determine the current negotiated data t… |
| 1.3.6.1.4.1.232.3.2.11.1.1.18 | ColumncpqDaTapeLibraryDriveList2 | read-only | mandatory | Drive Array Tape Library Tape Drive List 2. This is a data structure containing the list of tape drive ids that are present in this library. The format is: fie… |
| 1.3.6.1.4.1.232.3.2.11.1.1.19 | ColumncpqDaTapeLibraryProtocol | read-only | mandatory | Drive Array Tape Library Protocol. The following values are defined: other(1) The agent is unable to determine the protocol for this library. parallelScsi(2) T… |
| 1.3.6.1.4.1.232.3.2.11.1.1.20 | ColumncpqDaTapeLibraryNegotiatedLinkRate | read-only | mandatory | Drive Array Tape Library Negotiated Link Rate. The following values are defined: other(1) The agent is unable to determine the negotiated link rate for this li… |
| 1.3.6.1.4.1.232.3.3 | NodecpqDaPhyDrvStatusChange | Physical Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array physical drive. The variable cpaDaPhyDrvS… | ||
| 1.3.6.1.4.1.232.3.3 | NodecpqDaTrap | |||
| 1.3.6.1.4.1.232.3.3.1 | ScalarcpqDaTrapPkts | read-only | deprecated | The total number of trap packets issued by the drive array enterprise since the instrument agent was loaded. |
| 1.3.6.1.4.1.232.3.3.2 | ScalarcpqDaTrapLogMaxSize | read-only | deprecated | The maximum number of entries that will currently be kept in the trap log. If the maximum size has been reached and a new trap occurs the oldest trap will be r… |
| 1.3.6.1.4.1.232.3.3.3 | TablecpqDaTrapLogTable | not-accessible | deprecated | An ordered list of trap log entries (conceptually a queue). The trap log entries will be kept in the order in which they were generated with the most recent tr… |
| 1.3.6.1.4.1.232.3.3.3.1 | RowcpqDaTrapLogEntry | not-accessible | deprecated | A description of a trap event. |
| 1.3.6.1.4.1.232.3.3.3.1.1 | ColumncpqDaTrapLogIndex | read-only | deprecated | This value uniquely identifies this trapLogEntry at this time. The most recent trap will have an index of 1 and the oldest trap will have an index of trapLogMa… |
| 1.3.6.1.4.1.232.3.3.3.1.2 | ColumncpqDaTrapType | read-only | deprecated | The type of the trap event that this entry describes. This number refers to an entry in a list of traps enumerating the possible traps the Drive Array agent ma… |
| 1.3.6.1.4.1.232.3.3.3.1.3 | ColumncpqDaTrapTime | read-only | deprecated | The time of the trap event that this entry describes. The time is given in year (first octet), month, day of month, hour, minute, second (last octet) order. Ea… |
| 1.3.6.1.4.1.232.3.4 | NodecpqDaPhyDrvThreshPassedTrap | Physical Drive Threshold Passed. This trap signifies that the agent has detected a factory threshold associated with one of the physical drive objects on a dri… | ||
| 1.3.6.1.4.1.232.3.5 | NodecpqDaAccelStatusChange | Accelerator Board Status Change. This trap signifies that the agent has detected a change in the cpqDaAccelStatus of an array accelerator write cache. The curr… | ||
| 1.3.6.1.4.1.232.3.6 | NodecpqDaAccelBadDataTrap | Accelerator Board Bad Data. This trap signifies that the agent has detected an array accelerator cache board that has lost battery power. If data was being sto… | ||
| 1.3.6.1.4.1.232.3.7 | NodecpqDaAccelBatteryFailed | Accelerator Board Battery Failed. This trap signifies that the agent has detected a battery failure associated with the array accelerator cache board. The curr… | ||
| 1.3.6.1.4.1.232.3001 | NodecpqDa2LogDrvStatusChange | Logical Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array logical drive. The variable cpqDaLogDrvSta… | ||
| 1.3.6.1.4.1.232.3002 | NodecpqDa2SpareStatusChange | Spare Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array spare drive. The variable cpqDaSpareStatus i… | ||
| 1.3.6.1.4.1.232.3003 | NodecpqDa2PhyDrvStatusChange | Physical Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array physical drive. The variable cpaDaPhyDrvS… | ||
| 1.3.6.1.4.1.232.3004 | NodecpqDa2PhyDrvThreshPassedTrap | Physical Drive Threshold Passed. This trap signifies that the agent has detected a factory threshold associated with one of the physical drive objects on a dri… | ||
| 1.3.6.1.4.1.232.3005 | NodecpqDa2AccelStatusChange | Accelerator Board Status Change. This trap signifies that the Insight Agent has detected a change in the cpqDaAccelStatus of array accelerator cache. The curre… | ||
| 1.3.6.1.4.1.232.3006 | NodecpqDa2AccelBadDataTrap | Accelerator Board Bad Data. This trap signifies that the agent has detected an array accelerator cache board that has lost battery power. If data was being sto… | ||
| 1.3.6.1.4.1.232.3007 | NodecpqDa2AccelBatteryFailed | Accelerator Board Battery Failed. This trap signifies that the agent has detected a battery failure associated with the array accelerator cache board. The curr… | ||
| 1.3.6.1.4.1.232.3008 | NodecpqDa3LogDrvStatusChange | Logical Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array logical drive. The variable cpqDaLogDrvSta… | ||
| 1.3.6.1.4.1.232.3009 | NodecpqDa3SpareStatusChange | Spare Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array spare drive. The variable cpqDaSpareStatus i… | ||
| 1.3.6.1.4.1.232.3010 | NodecpqDa3PhyDrvStatusChange | Physical Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array physical drive. The variable cpaDaPhyDrvS… | ||
| 1.3.6.1.4.1.232.3011 | NodecpqDa3PhyDrvThreshPassedTrap | Physical Drive Threshold Passed. This trap signifies that the agent has detected a factory threshold associated with one of the physical drive objects on a dri… | ||
| 1.3.6.1.4.1.232.3012 | NodecpqDa3AccelStatusChange | Accelerator Board Status Change. This trap signifies that the agent has detected a change in the cpqDaAccelStatus of an array accelerator cache board. The curr… | ||
| 1.3.6.1.4.1.232.3013 | NodecpqDa3AccelBadDataTrap | Accelerator Board Bad Data. This trap signifies that the agent has detected an array accelerator cache board that has lost battery power. If data was being sto… | ||
| 1.3.6.1.4.1.232.3014 | NodecpqDa3AccelBatteryFailed | Accelerator Board Battery Failed. This trap signifies that the agent has detected a battery failure associated with the array accelerator cache board. The curr… | ||
| 1.3.6.1.4.1.232.3015 | NodecpqDaCntlrStatusChange | Controller Status Change. This trap signifies that the agent has detected a change in the status of a drive array controller. The variable cpqDaCntlrBoardStatu… | ||
| 1.3.6.1.4.1.232.3016 | NodecpqDaCntlrActive | Controller Active. This trap signifies that the agent has detected that a backup array controller in a duplexed pair has switched over to the active role. The … | ||
| 1.3.6.1.4.1.232.3017 | NodecpqDa4SpareStatusChange | Spare Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array spare drive. The variable cpqDaSpareStatus i… | ||
| 1.3.6.1.4.1.232.3018 | NodecpqDa4PhyDrvStatusChange | Physical Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array physical drive. The variable cpaDaPhyDrvS… | ||
| 1.3.6.1.4.1.232.3019 | NodecpqDa4PhyDrvThreshPassedTrap | Physical Drive Threshold Passed. This trap signifies that the agent has detected a factory threshold associated with one of the physical drive objects on a dri… | ||
| 1.3.6.1.4.1.232.3020 | NodecpqDaTapeLibraryStatusChange | Tape Library Status Change. This trap signifies that the agent has detected a change in the status of a tape library. The variable cpqDaTapeLibraryStatus indic… | ||
| 1.3.6.1.4.1.232.3021 | NodecpqDaTapeLibraryDoorStatusChange | Tape Library Door Status Change. This trap signifies that the agent has detected a change in the door status of a tape library. The variable cpqDaTapeLibraryDo… | ||
| 1.3.6.1.4.1.232.3022 | NodecpqDaTapeDriveStatusChange | Tape Drive Status Change. This trap signifies that the agent has detected a change in the status of a tape drive. The variable cpqDaTapeDrvStatus indicates the… | ||
| 1.3.6.1.4.1.232.3023 | NodecpqDaTapeDriveCleaningRequired | Tape Drive Cleaning Required trap. The agent has detected a tape drive that needs to have a cleaning tape inserted and run. This will cause the tape drive head… | ||
| 1.3.6.1.4.1.232.3024 | NodecpqDaTapeDriveCleanTapeReplace | Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an autoloader tape unit has a cleaning tape that has been fully used and therefore needs … | ||
| 1.3.6.1.4.1.232.3025 | NodecpqDa5AccelStatusChange | Accelerator Board Status Change. This trap signifies that the agent has detected a change in the status of an array accelerator cache board. The current status… | ||
| 1.3.6.1.4.1.232.3026 | NodecpqDa5AccelBadDataTrap | Accelerator Board Bad Data. This trap signifies that the agent has detected an array accelerator cache board that has lost battery power. If data was being sto… | ||
| 1.3.6.1.4.1.232.3027 | NodecpqDa5AccelBatteryFailed | Accelerator Board Battery Failed. This trap signifies that the agent has detected a battery failure associated with the array accelerator cache board. User Act… | ||
| 1.3.6.1.4.1.232.3028 | NodecpqDa5CntlrStatusChange | Controller Status Change. This trap signifies that the agent has detected a change in the status of a drive array controller. The variable cpqDaCntlrBoardStatu… | ||
| 1.3.6.1.4.1.232.3029 | NodecpqDa5PhyDrvStatusChange | Physical Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array physical drive. The variable cpaDaPhyDrvS… | ||
| 1.3.6.1.4.1.232.3030 | NodecpqDa5PhyDrvThreshPassedTrap | Physical Drive Threshold Passed. This trap signifies that the agent has detected a factory threshold associated with one of the physical drive objects on a dri… | ||
| 1.3.6.1.4.1.232.3031 | NodecpqDa2TapeLibraryStatusChange | Tape Library Status Change. This trap signifies that the agent has detected a change in the status of a tape library. The variable cpqDaTapeLibraryStatus indic… | ||
| 1.3.6.1.4.1.232.3032 | NodecpqDa2TapeDriveStatusChange | Tape Drive Status Change. This trap signifies that the agent has detected a change in the status of a tape drive. The variable cpqDaTapeDrvStatus indicates the… | ||
| 1.3.6.1.4.1.232.3033 | NodecpqDa6CntlrStatusChange | Controller Status Change. This trap signifies that the agent has detected a change in the status of a drive array controller. The variable cpqDaCntlrBoardStatu… | ||
| 1.3.6.1.4.1.232.3034 | NodecpqDa6LogDrvStatusChange | Logical Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array logical drive. The variable cpqDaLogDrvSta… | ||
| 1.3.6.1.4.1.232.3035 | NodecpqDa6SpareStatusChange | Spare Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array spare drive. The variable cpqDaSpareStatus i… | ||
| 1.3.6.1.4.1.232.3036 | NodecpqDa6PhyDrvStatusChange | Physical Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array physical drive. The variable cpaDaPhyDrvS… | ||
| 1.3.6.1.4.1.232.3037 | NodecpqDa6PhyDrvThreshPassedTrap | Physical Drive Threshold Passed. This trap signifies that the agent has detected a factory threshold associated with one of the physical drive objects on a dri… | ||
| 1.3.6.1.4.1.232.3038 | NodecpqDa6AccelStatusChange | Storage - Controller Write Cache Status Changed. This trap signifies that the agent has detected a change in the status of a cache. The current status is repre… | ||
| 1.3.6.1.4.1.232.3039 | NodecpqDa6AccelBadDataTrap | Storage - Controller Write Cache Data Lost. This trap signifies that the agent has detected a controller cache module that has lost backup power. If data was b… | ||
| 1.3.6.1.4.1.232.3040 | NodecpqDa6AccelBatteryFailed | Cache Module Board Backup Power Source Failed. This trap signifies that the agent has detected a backup power source failure associated with the cache module b… | ||
| 1.3.6.1.4.1.232.3041 | NodecpqDa6TapeLibraryStatusChange | Tape Library Status Change. This trap signifies that the agent has detected a change in the status of a tape library. The variable cpqDaTapeLibraryStatus indic… | ||
| 1.3.6.1.4.1.232.3042 | NodecpqDa6TapeLibraryDoorStatusChange | Tape Library Door Status Change. This trap signifies that the agent has detected a change in the door status of a tape library. The variable cpqDaTapeLibraryDo… | ||
| 1.3.6.1.4.1.232.3043 | NodecpqDa6TapeDriveStatusChange | Tape Drive Status Change. This trap signifies that the agent has detected a change in the status of a tape drive. The variable cpqDaTapeDrvStatus indicates the… | ||
| 1.3.6.1.4.1.232.3044 | NodecpqDa6TapeDriveCleaningRequired | Tape Drive Cleaning Required trap. The agent has detected a tape drive that needs to have a cleaning tape inserted and run. This will cause the tape drive head… | ||
| 1.3.6.1.4.1.232.3045 | NodecpqDa6TapeDriveCleanTapeReplace | Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an autoloader tape unit has a cleaning tape that has been fully used and therefore needs … | ||
| 1.3.6.1.4.1.232.3046 | NodecpqDa7PhyDrvStatusChange | Physical Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array physical drive. The variable cpaDaPhyDrvS… | ||
| 1.3.6.1.4.1.232.3047 | NodecpqDa7SpareStatusChange | Spare Drive Status Change. This trap signifies that the agent has detected a change in the status of a drive array spare drive. The variable cpqDaSpareStatus i… | ||
| 1.3.6.1.4.1.232.3048 | NodecpqDaCntlrPartnerStatusChange | Partner Controller Status Change. This trap signifies that the agent has detected a change in the status of a drive array partner controller. The variable cpqD… | ||
| 1.3.6.1.4.1.232.3049 | NodecpqDaPhyDrvSSDWearStatusChange | Solid State Disk Wear Status Change. This trap signifies that the agent has detected a change in the SSD wear status of a drive array physical drive. The varia… | ||
| 1.3.6.1.4.1.232.3903 | NodecpqDaSmartArraySecureEraseFailed | Secure Erase of Smart Array has failed. |