CPQIODRV-MIB
139 objects
No module-level DESCRIPTION found.
Imported Objects
| CPQHOST-MIB | compaq cpqHoTrapFlags |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter |
| RFC1213-MIB | DisplayString sysName |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.172 | NodecpqIoDrv | |||
| 1.3.6.1.4.1.232.172.1 | NodecpqIoDrvMibRev | |||
| 1.3.6.1.4.1.232.172.1.1 | ScalarcpqIoDrvMibRevMajor | read-only | mandatory | Major MIB revision. This will increment when incompatible structural changes occur. |
| 1.3.6.1.4.1.232.172.1.2 | ScalarcpqIoDrvMibRevMinor | read-only | mandatory | Minor MIB revision. This will increment when minor additions occur. |
| 1.3.6.1.4.1.232.172.1.3 | ScalarcpqIoDrvMibCondition | read-only | mandatory | The overall condition (status) of the system represented by this MIB. |
| 1.3.6.1.4.1.232.172.2 | NodecpqIoDrvComponent | |||
| 1.3.6.1.4.1.232.172.2.1 | NodecpqIoDrvInfo | |||
| 1.3.6.1.4.1.232.172.2.1.1 | TablecpqIoDrvInfoTable | not-accessible | mandatory | There will be an entry in this table for each IO Drive installed. |
| 1.3.6.1.4.1.232.172.2.1.1.1 | RowcpqIoDrvInfoEntry | not-accessible | mandatory | Each entry represents an IO Drive device in system. |
| 1.3.6.1.4.1.232.172.2.1.1.1.1 | ColumncpqIoDrvInfoIndex | read-only | mandatory | Unique number index for each IO Drive entries. |
| 1.3.6.1.4.1.232.172.2.1.1.1.2 | ColumncpqIoDrvInfoStatus | read-only | mandatory | The overall status of the unique IO Drive device. |
| 1.3.6.1.4.1.232.172.2.1.1.1.3 | ColumncpqIoDrvInfoName | read-write | mandatory | System control device name for this IO Drive. |
| 1.3.6.1.4.1.232.172.2.1.1.1.4 | ColumncpqIoDrvInfoSerialNumber | read-only | mandatory | IO Drive serial number. |
| 1.3.6.1.4.1.232.172.2.1.1.1.5 | ColumncpqIoDrvInfoPartNumber | read-only | mandatory | IO Drive part number. |
| 1.3.6.1.4.1.232.172.2.1.1.1.6 | ColumncpqIoDrvInfoSubVendorPartNumber | read-only | mandatory | Sub-vendor system part number of this device. |
| 1.3.6.1.4.1.232.172.2.1.1.1.7 | ColumncpqIoDrvInfoSparesPartNumber | read-only | mandatory | The spares part number of this IO Drive. |
| 1.3.6.1.4.1.232.172.2.1.1.1.8 | ColumncpqIoDrvInfoAssemblyNumber | read-only | mandatory | The assembly number of this IO Drive (HW revision). |
| 1.3.6.1.4.1.232.172.2.1.1.1.9 | ColumncpqIoDrvInfoFirmwareVersion | read-only | mandatory | IO Drive firmware version. |
| 1.3.6.1.4.1.232.172.2.1.1.1.10 | ColumncpqIoDrvInfoDriverVersion | read-only | mandatory | Device driver version of this IO Drive. |
| 1.3.6.1.4.1.232.172.2.1.1.1.11 | ColumncpqIoDrvInfoUID | read-only | mandatory | IO Drive UID written at format time. |
| 1.3.6.1.4.1.232.172.2.1.1.1.12 | ColumncpqIoDrvInfoState | read-write | mandatory | The current state of the attached client device. In order to function normally, the device must be in the 'attached' state. Quiescent states: attached = device… |
| 1.3.6.1.4.1.232.172.2.1.1.1.13 | ColumncpqIoDrvInfoClientDeviceName | read-only | mandatory | The name of the attached client device. |
| 1.3.6.1.4.1.232.172.2.1.1.1.14 | ColumncpqIoDrvInfoBeacon | read-write | mandatory | Writing a true value here will turn on the LED flashing beacon for visual card identification. A false value will turn the LED beacon off. |
| 1.3.6.1.4.1.232.172.2.1.1.1.15 | ColumncpqIoDrvInfoPCIAddress | read-only | mandatory | IO Drive address on the PCI bus. |
| 1.3.6.1.4.1.232.172.2.1.1.1.16 | ColumncpqIoDrvInfoPCIDeviceID | read-only | mandatory | IO Drive PCI ID. |
| 1.3.6.1.4.1.232.172.2.1.1.1.17 | ColumncpqIoDrvInfoPCISubdeviceID | read-only | mandatory | The PCI subdevice ID of this IO Drive. |
| 1.3.6.1.4.1.232.172.2.1.1.1.18 | ColumncpqIoDrvInfoPCIVendorID | read-only | mandatory | The subvendor ID of this IO Drive. |
| 1.3.6.1.4.1.232.172.2.1.1.1.19 | ColumncpqIoDrvInfoPCISubvendorID | read-only | mandatory | The subvendor ID of this IO Drive. |
| 1.3.6.1.4.1.232.172.2.1.1.1.20 | ColumncpqIoDrvInfoPCISlot | read-only | mandatory | The PCI slot number of this IO Drive. |
| 1.3.6.1.4.1.232.172.2.1.1.1.21 | ColumncpqIoDrvInfoWearoutIndicator | read-only | mandatory | A true condition indicates that the device has surpassed the wearout threshold. |
| 1.3.6.1.4.1.232.172.2.1.1.1.22 | ColumncpqIoDrvInfoFlashbackIndicator | read-only | mandatory | A true condition indicates that flashback redundancy is degraded. |
| 1.3.6.1.4.1.232.172.2.1.1.1.23 | ColumncpqIoDrvInfoNonWritableIndicator | read-only | mandatory | A value that indicates the writability of the device. This has been expanded to add the writeReduced value. |
| 1.3.6.1.4.1.232.172.2.1.1.1.24 | ColumncpqIoDrvInfoCurrentTemp | read-only | mandatory | The current internal temperature of the device in Celsius. |
| 1.3.6.1.4.1.232.172.2.1.1.1.25 | ColumncpqIoDrvInfoPercentLifeRemaining | read-only | mandatory | An estimate of the health of the drive expressed as the remaining percentage of drive life before write rate is reduced due to wearout. If health percentage is… |
| 1.3.6.1.4.1.232.172.2.1.1.1.26 | ColumncpqIoDrvInfoShortTermWearoutDate | read-only | obsolete | The date that the drive is estimated to reach the wearout threshold based on drive usage in the short-term interval. |
| 1.3.6.1.4.1.232.172.2.1.1.1.27 | ColumncpqIoDrvInfoLongTermWearoutDate | read-only | obsolete | The date that the drive is estimated to reach the wearout threshold based on drive usage in the long-term interval. |
| 1.3.6.1.4.1.232.172.2.1.1.1.28 | ColumncpqIoDrvInfoShortTermNonWritableDate | read-only | obsolete | The date that the drive is estimated to go non-writable based on drive usage in the short-term interval. |
| 1.3.6.1.4.1.232.172.2.1.1.1.29 | ColumncpqIoDrvInfoLongTermNonWritableDate | read-only | obsolete | The date that the drive is estimated to go non-writable based on drive usage in the long-term interval. |
| 1.3.6.1.4.1.232.172.2.1.1.1.30 | ColumncpqIoDrvInfoMinimalModeReason | read-only | mandatory | Reason card is in minimal mode. |
| 1.3.6.1.4.1.232.172.2.1.1.1.31 | ColumncpqIoDrvInfoReducedWriteReason | read-only | mandatory | Reason card is in reduced write mode. |
| 1.3.6.1.4.1.232.172.2.1.1.1.32 | ColumncpqIoDrvInfoMilliVolts | read-only | mandatory | Current voltage level of PCIe 12 volt bus in millivolts. A value of 0 means value could not be determined. |
| 1.3.6.1.4.1.232.172.2.1.1.1.33 | ColumncpqIoDrvInfoMilliVoltsPeak | read-only | mandatory | Peak voltage level of PCIe 12 volt bus in millivolts. A value of 0 means value could not be determined. |
| 1.3.6.1.4.1.232.172.2.1.1.1.34 | ColumncpqIoDrvInfoMilliVoltsMin | read-only | mandatory | Minimum voltage level of PCIe 12 volt bus in millivolts. A value of 0 means value could not be determined. |
| 1.3.6.1.4.1.232.172.2.1.1.1.35 | ColumncpqIoDrvInfoMilliWatts | read-only | mandatory | Current wattage drawn on the PCIe 12 volt bus in milliwatts. A value of 0 means value could not be determined. |
| 1.3.6.1.4.1.232.172.2.1.1.1.36 | ColumncpqIoDrvInfoMilliWattsPeak | read-only | mandatory | Peak wattage drawn on the PCIe 12 volt bus in milliwatts. A value of 0 means value could not be determined. |
| 1.3.6.1.4.1.232.172.2.1.1.1.37 | ColumncpqIoDrvInfoMilliAmps | read-only | mandatory | Amperage flowing on the PCIe 12 volt bus in milliamps. A value of 0 means value could not be determined. |
| 1.3.6.1.4.1.232.172.2.1.1.1.38 | ColumncpqIoDrvInfoMilliAmpsPeak | read-only | mandatory | Peak amperage flowing on the PCIe 12 volt bus in milliamps. A value of 0 means value could not be determined. |
| 1.3.6.1.4.1.232.172.2.1.1.1.39 | ColumncpqIoDrvInfoAdapterType | read-only | mandatory | Type of ioDimm adapter. |
| 1.3.6.1.4.1.232.172.2.1.1.1.40 | ColumncpqIoDrvInfoAdapterPort | read-only | mandatory | Port number of this ioDimm on the adapter. If port number is not available the value will be set to -1. |
| 1.3.6.1.4.1.232.172.2.1.1.1.41 | ColumncpqIoDrvInfoAdapterSerialNumber | read-only | mandatory | Serial number of the adapter where this ioDimm is connected. |
| 1.3.6.1.4.1.232.172.2.1.1.1.42 | ColumncpqIoDrvInfoAdapterExtPowerPresent | read-only | mandatory | A true condition indicates that external power is connected on the adapter where this ioDimm is connected. |
| 1.3.6.1.4.1.232.172.2.1.1.1.43 | ColumncpqIoDrvInfoPowerlossProtectDisabled | read-only | mandatory | A true condition indicates that powerloss protection is available but disabled. |
| 1.3.6.1.4.1.232.172.2.1.1.1.44 | ColumncpqIoDrvInfoInternalTempHigh | read-only | mandatory | A true condition indicates that the internal temperature is nearing the maximum rating. |
| 1.3.6.1.4.1.232.172.2.1.1.1.45 | ColumncpqIoDrvInfoAmbientTemp | read-only | obsolete | The current ambient temperature of the device in Celsius. |
| 1.3.6.1.4.1.232.172.2.1.1.1.46 | ColumncpqIoDrvInfoPCIBandwidthCompatibility | read-only | mandatory | The bandwidth compatibility of the PCI-E slot. If the value is not optimal, the status and condition variables will be set accordingly. |
| 1.3.6.1.4.1.232.172.2.1.1.1.47 | ColumncpqIoDrvInfoPCIPowerCompatibility | read-only | mandatory | The power compatibility of the PCI-E slot. If the value is not optimal, the status and condition variables will be set accordingly. |
| 1.3.6.1.4.1.232.172.2.1.1.1.48 | ColumncpqIoDrvInfoActualGoverningLevel | read-only | mandatory | The level of governing currently happening on the device. This may be due to any of several reasons. Current reasons are because of high temperature, power sho… |
| 1.3.6.1.4.1.232.172.2.1.1.1.49 | ColumncpqIoDrvInfoLifespanGoverningLevel | read-only | mandatory | Governing may be impacted for the sake of prolonging longevity of the device. This value indicates the level of contribution for longevity. none = no governing… |
| 1.3.6.1.4.1.232.172.2.1.1.1.50 | ColumncpqIoDrvInfoPowerGoverningLevel | read-only | mandatory | Governing may be impacted due to a lack of power available to the device. This value indicates the level of contribution due to lack of power. none = no govern… |
| 1.3.6.1.4.1.232.172.2.1.1.1.51 | ColumncpqIoDrvInfoThermalGoverningLevel | read-only | mandatory | Governing may be impacted due to the device reaching high temperatures. This value indicates the level of contribution due to high temperatures. none = no gove… |
| 1.3.6.1.4.1.232.172.2.1.1.1.52 | ColumncpqIoDrvInfoLifespanGoverningEnabled | read-only | mandatory | A true condition indicates that lifespan governing is enabled. |
| 1.3.6.1.4.1.232.172.2.1.1.1.53 | ColumncpqIoDrvInfoLifespanGoverningTgtDate | read-only | mandatory | The target lifespan governing date. |
| 1.3.6.1.4.1.232.172.2.2 | NodecpqIoDrvExtn | |||
| 1.3.6.1.4.1.232.172.2.2.1 | TablecpqIoDrvExtnTable | not-accessible | mandatory | This table is extension of IO Drive information. |
| 1.3.6.1.4.1.232.172.2.2.1.1 | RowcpqIoDrvExtnEntry | not-accessible | mandatory | Addiotnal Informaiton about IO Drive will be populated in this table. |
| 1.3.6.1.4.1.232.172.2.2.1.1.1 | ColumncpqIoDrvExtnIndex | read-only | mandatory | Unique number index for each IO Drive extension entries. There will be one-one mapping between cpqIoDrvExtnIndex and cpqIoDrvInfoIndex. |
| 1.3.6.1.4.1.232.172.2.2.1.1.2 | ColumncpqIoDrvExtnTotalPhysicalCapacityU | read-only | mandatory | The upper word of the max format size in bytes. |
| 1.3.6.1.4.1.232.172.2.2.1.1.3 | ColumncpqIoDrvExtnTotalPhysicalCapacityL | read-only | mandatory | The lower word of the max format size in bytes. |
| 1.3.6.1.4.1.232.172.2.2.1.1.4 | ColumncpqIoDrvExtnUsablePhysicalCapacityU | read-only | obsolete | The upper word of the usable physical capacity in bytes. This is space that is holding valid data, is erased and ready for writing or waiting to be reclaimed v… |
| 1.3.6.1.4.1.232.172.2.2.1.1.5 | ColumncpqIoDrvExtnUsablePhysicalCapacityL | read-only | obsolete | The lower word of the usable physical capacity in bytes. This is space that is holding valid data, is erased and ready for writing or waiting to be reclaimed v… |
| 1.3.6.1.4.1.232.172.2.2.1.1.6 | ColumncpqIoDrvExtnUsedPhysicalCapacityU | read-only | obsolete | The upper word used physical capacity in bytes. This is the space holding valid, current data. |
| 1.3.6.1.4.1.232.172.2.2.1.1.7 | ColumncpqIoDrvExtnUsedPhysicalCapacityL | read-only | obsolete | The lower word used physical capacity in bytes. This is the space holding valid, current data. |
| 1.3.6.1.4.1.232.172.2.2.1.1.8 | ColumncpqIoDrvExtnTotalLogicalCapacityU | read-only | mandatory | The upper word of the total logical capacity in bytes as formatted. |
| 1.3.6.1.4.1.232.172.2.2.1.1.9 | ColumncpqIoDrvExtnTotalLogicalCapacityL | read-only | mandatory | The lower word of the total logical capacity in bytes as formatted. |
| 1.3.6.1.4.1.232.172.2.2.1.1.10 | ColumncpqIoDrvExtnAvailableLogicalCapacityU | read-only | obsolete | The upper word of the available logical capacity in bytes. |
| 1.3.6.1.4.1.232.172.2.2.1.1.11 | ColumncpqIoDrvExtnAvailableLogicalCapacityL | read-only | obsolete | The lower word of the available logical capacity in bytes. |
| 1.3.6.1.4.1.232.172.2.2.1.1.12 | ColumncpqIoDrvExtnBytesReadU | read-only | mandatory | The upper word of the total number of bytes read since the device was formatted. |
| 1.3.6.1.4.1.232.172.2.2.1.1.13 | ColumncpqIoDrvExtnBytesReadL | read-only | mandatory | The lower word of the total number of bytes read since the device was formatted. |
| 1.3.6.1.4.1.232.172.2.2.1.1.14 | ColumncpqIoDrvExtnPhysicalBytesWrittenU | read-only | mandatory | The upper word of the total bytes written. |
| 1.3.6.1.4.1.232.172.2.2.1.1.15 | ColumncpqIoDrvExtnPhysicalBytesWrittenL | read-only | mandatory | The lower word of the total bytes written. |
| 1.3.6.1.4.1.232.172.2.2.1.1.16 | ColumncpqIoDrvExtnLogicalBytesWrittenU | read-only | obsolete | The upper word of the number of user data bytes written. |
| 1.3.6.1.4.1.232.172.2.2.1.1.17 | ColumncpqIoDrvExtnLogicalBytesWrittenL | read-only | obsolete | The lower word of the number of user data bytes written. |
| 1.3.6.1.4.1.232.172.2.2.1.1.18 | ColumncpqIoDrvExtnShortTermStartDate | read-write | obsolete | The start date used to characterize short-term drive usage. |
| 1.3.6.1.4.1.232.172.2.2.1.1.19 | ColumncpqIoDrvExtnShortTermWindow | read-write | obsolete | The number of hours in the short-term usage characterization window. If this value is non-zero, then the short-term start date will automatically track with th… |
| 1.3.6.1.4.1.232.172.2.2.1.1.20 | ColumncpqIoDrvExtnShortTermEndDate | read-write | obsolete | The end date used to characterize short-term drive usage. |
| 1.3.6.1.4.1.232.172.2.2.1.1.21 | ColumncpqIoDrvExtnShortTermEndDateFloat | read-write | obsolete | Set this variable true to automatically have the short-term end date automatically updated to the present date. |
| 1.3.6.1.4.1.232.172.2.2.1.1.22 | ColumncpqIoDrvExtnLongTermStartDate | read-write | obsolete | The start date used to characterize long-term drive usage. |
| 1.3.6.1.4.1.232.172.2.2.1.1.23 | ColumncpqIoDrvExtnLongTermWindow | read-write | obsolete | The number of hours in the long-term usage characterization window. If this value is non-zero, then the long-term start date will automatically track with the … |
| 1.3.6.1.4.1.232.172.2.2.1.1.24 | ColumncpqIoDrvExtnLongTermEndDate | read-write | obsolete | The end date used to characterize long-term drive usage. |
| 1.3.6.1.4.1.232.172.2.2.1.1.25 | ColumncpqIoDrvExtnLongTermEndDateFloat | read-write | obsolete | Set this variable true to automatically have the long-term end date automatically updated to the present date. |
| 1.3.6.1.4.1.232.172.2.2.1.1.26 | ColumncpqIoDrvExtnWriteRateAutoCalc | read-write | obsolete | Set this true to automatically calculate the long-term and short-term average write rate based on the start and end dates selected. Otherwise, the average writ… |
| 1.3.6.1.4.1.232.172.2.2.1.1.27 | ColumncpqIoDrvExtnShortTermAvgU | read-write | obsolete | The upper word of the short-term average write rate used to characterize drive usage. This will be automatically calculated based on short-term start and end d… |
| 1.3.6.1.4.1.232.172.2.2.1.1.28 | ColumncpqIoDrvExtnShortTermAvgL | read-write | obsolete | The lower word of the short-term average write rate used to characterize drive usage. This will be automatically calculated based on short-term start and end d… |
| 1.3.6.1.4.1.232.172.2.2.1.1.29 | ColumncpqIoDrvExtnLongTermAvgU | read-write | obsolete | The upper word of the long-term average write rate used to characterize drive usage. This will be automatically calculated based on long-term start and end dat… |
| 1.3.6.1.4.1.232.172.2.2.1.1.30 | ColumncpqIoDrvExtnLongTermAvgL | read-write | obsolete | The lower word of the long-term average write rate used to characterize drive usage. This will be automatically calculated based on long-term start and end dat… |
| 1.3.6.1.4.1.232.172.2.2.1.1.31 | ColumncpqIoDrvExtnConfidenceInterval | read-write | obsolete | This defines the confidence interval used to calculate the wearout and non-writable dates. Expressed as a percentage, this value reflects the confidence in the… |
| 1.3.6.1.4.1.232.172.2.2.1.1.32 | ColumncpqIoDrvExtnFormattedBlockSize | read-only | mandatory | The block size that this device is formatted to use. |
| 1.3.6.1.4.1.232.172.2.2.1.1.33 | ColumncpqIoDrvExtnCurrentRAMUsageU | read-only | mandatory | The upper word of the current RAM usage in bytes for the drive. |
| 1.3.6.1.4.1.232.172.2.2.1.1.34 | ColumncpqIoDrvExtnCurrentRAMUsageL | read-only | mandatory | The lower word of the current RAM usage in bytes for the drive. |
| 1.3.6.1.4.1.232.172.2.2.1.1.35 | ColumncpqIoDrvExtnPeakRAMUsageU | read-only | mandatory | The upper word of the peak RAM usage in bytes for the drive. |
| 1.3.6.1.4.1.232.172.2.2.1.1.36 | ColumncpqIoDrvExtnPeakRAMUsageL | read-only | mandatory | The lower word of the peak RAM usage in bytes for the drive. |
| 1.3.6.1.4.1.232.172.2.3 | NodecpqIoDrvCapacity | |||
| 1.3.6.1.4.1.232.172.2.3.1 | TablecpqIoDrvCapacityTable | not-accessible | mandatory | This table will describe the physical capacity of IO Drive. |
| 1.3.6.1.4.1.232.172.2.3.1.1 | RowcpqIoDrvCapacityEntry | not-accessible | mandatory | Defines an entry of the usable physical capacity table |
| 1.3.6.1.4.1.232.172.2.3.1.1.1 | ColumncpqIoDrvCapacityInfoIndex | read-only | mandatory | The ioDrive index. This correlates to the drive index in the info table. |
| 1.3.6.1.4.1.232.172.2.3.1.1.2 | ColumncpqIoDrvCapacityIndex | read-only | optional | Unique index for the usable physical capacity log. |
| 1.3.6.1.4.1.232.172.2.3.1.1.3 | ColumncpqIoDrvCapacityValueU | read-only | mandatory | The upper word of the physical usable capacity at this point in time |
| 1.3.6.1.4.1.232.172.2.3.1.1.4 | ColumncpqIoDrvCapacityValueL | read-only | mandatory | The lower word of the physical usable capacity at this point in time |
| 1.3.6.1.4.1.232.172.2.3.1.1.5 | ColumncpqIoDrvCapacityTimestamp | read-only | mandatory | The time stamp entry. |
| 1.3.6.1.4.1.232.172.2.4 | NodecpqIoDrvWrite | |||
| 1.3.6.1.4.1.232.172.2.4.1 | TablecpqIoDrvWriteTable | not-accessible | optional | This table will keep the history of writes on the IO Drive |
| 1.3.6.1.4.1.232.172.2.4.1.1 | RowcpqIoDrvWriteEntry | not-accessible | optional | A log of write volume history. |
| 1.3.6.1.4.1.232.172.2.4.1.1.1 | ColumncpqIoDrvWriteInfoIndex | read-only | mandatory | The ioDrive index. This correlates with the index in the info table. |
| 1.3.6.1.4.1.232.172.2.4.1.1.2 | ColumncpqIoDrvWriteIndex | read-only | optional | Unique index for this write volume entry. |
| 1.3.6.1.4.1.232.172.2.4.1.1.3 | ColumncpqIoDrvWriteValueU | read-only | mandatory | The upper word of the total physical number of bytes written at a given moment in time. |
| 1.3.6.1.4.1.232.172.2.4.1.1.4 | ColumncpqIoDrvWriteValueL | read-only | mandatory | The lower word of the total physical number of bytes written at a given moment in time. |
| 1.3.6.1.4.1.232.172.2.4.1.1.5 | ColumncpqIoDrvWriteTimestamp | read-only | mandatory | The time stamp entryfor this value. |
| 1.3.6.1.4.1.232.172.2.5 | NodecpqIoDrvTemp | |||
| 1.3.6.1.4.1.232.172.2.5.1 | TablecpqIoDrvTempTable | not-accessible | optional | IO Drive temperature history table. |
| 1.3.6.1.4.1.232.172.2.5.1.1 | RowcpqIoDrvTempEntry | not-accessible | optional | Log of IO Drive temperature. |
| 1.3.6.1.4.1.232.172.2.5.1.1.1 | ColumncpqIoDrvTempInfoIndex | read-only | mandatory | The device index. This correlates to the index in the info table. |
| 1.3.6.1.4.1.232.172.2.5.1.1.2 | ColumncpqIoDrvTempIndex | read-only | optional | Unique index for this temperature log entry. |
| 1.3.6.1.4.1.232.172.2.5.1.1.3 | ColumncpqIoDrvTempValue | read-only | mandatory | The current temperature of the device in Celsius. |
| 1.3.6.1.4.1.232.172.2.5.1.1.4 | ColumncpqIoDrvTempTimestamp | read-only | mandatory | The timestamp for this entry. |
| 1.3.6.1.4.1.232.172.2.6 | NodecpqIoDrvProc | |||
| 1.3.6.1.4.1.232.172.2.6.1 | TablecpqIoDrvProcTable | not-accessible | obsolete | A table of processes that support IO Drive operation. |
| 1.3.6.1.4.1.232.172.2.6.1.1 | RowcpqIoDrvProcEntry | not-accessible | obsolete | Each entry represents a process in the table. |
| 1.3.6.1.4.1.232.172.2.6.1.1.1 | ColumncpqIoDrvProcIndex | read-only | obsolete | A unique index for each process. |
| 1.3.6.1.4.1.232.172.2.6.1.1.2 | ColumncpqIoDrvProcName | read-only | obsolete | The process name. |
| 1.3.6.1.4.1.232.172.2.6.1.1.3 | ColumncpqIoDrvProcState | read-only | obsolete | The process state. |
| 1.3.6.1.4.1.232.172.2.6.1.1.4 | ColumncpqIoDrvProcRAM | read-only | obsolete | The bytes of RAM currently in use by the process. |
| 1.3.6.1.4.1.232.172.2.6.1.1.5 | ColumncpqIoDrvProcCPU | read-only | obsolete | The overall percentage of CPU usage. |
| 1.3.6.1.4.1.232.172001 | NodecpqIoDrvWearoutTrap | IO Drive begins to wear out. This trap signifies that the agent has detected a wear out of IO Drive configured with your system. | ||
| 1.3.6.1.4.1.232.172002 | NodecpqIoDrvNonWritableTrap | IO Drive is not writeable due to excessive wear This trap signifies that IO Drive configured with system is not writeable due to excessive wear. User Action: R… | ||
| 1.3.6.1.4.1.232.172003 | NodecpqIoDrvFlashbackTrap | IO Drive flashback protection becomes degraded This trap signifies that IO Drive flashback protection configured with system is degraded. | ||
| 1.3.6.1.4.1.232.172004 | NodecpqIoDrvTempHighTrap | Temperature sensor of IO Drive surpasses the threshold. This trap signifies that the temperature sensor of IO Drive configured with system surpasses the thresh… | ||
| 1.3.6.1.4.1.232.172005 | NodecpqIoDrvTempOkTrap | Temperature sensor of IO Drive set below threshold. This trap signifies that the temperature sensor of IO Drive configured with system surpasses the threshold … | ||
| 1.3.6.1.4.1.232.172006 | NodecpqIoDrvErrorTrap | IO Drive is in an error state. | ||
| 1.3.6.1.4.1.232.172007 | NodecpqIoDrvPowerlossProtectTrap | IO Drive powerloss protection is disabled. |