CPQNUNIF-MIB
95 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232 | Nodecompaq | |||
| 1.3.6.1.4.1.232.121 | NodecpqnCommon | |||
| 1.3.6.1.4.1.232.121.1 | NodecpqnMibModules | |||
| 1.3.6.1.4.1.232.121.1.1 | TablecpqnMibModuleTable | not-accessible | mandatory | This table contains a list of all the MIB modules actively supported by a unit's agent. This includes any standard RFC and Compaq enterprise MIBs. |
| 1.3.6.1.4.1.232.121.1.1.1 | RowcpqnMibModuleEntry | not-accessible | mandatory | There is one entry defined for each separate MIB module the agent supports. |
| 1.3.6.1.4.1.232.121.1.1.1.1 | ColumncpqnMibModuleIndex | read-only | mandatory | The index for this entry. |
| 1.3.6.1.4.1.232.121.1.1.1.2 | ColumncpqnMibModuleDescr | read-only | mandatory | This is a short textual description of the MIB module for this entry. Examples could be RFC 1213 MIB-II or Compaq Unified MIB. |
| 1.3.6.1.4.1.232.121.1.1.1.3 | ColumncpqnMibModuleOid | read-only | mandatory | This is the OID representing the base node of the MIB for this entry. The base node of a MIB is defined here as the first MIB node that is not defined in anoth… |
| 1.3.6.1.4.1.232.121.2 | NodecpqnUnitControl | |||
| 1.3.6.1.4.1.232.121.2.1 | ScalarcpqnUnitReset | read-write | mandatory | Setting this object to reset(2) causes the unit to reset in the most complete manner possible. Any hardware units that can be reset, will be. If possible, this… |
| 1.3.6.1.4.1.232.121.2.2 | ScalarcpqnPrimarySerialPort | read-only | mandatory | This object indicates which entry in the cpqnSerialPortTable is the primary serial port. For a list of the functions and features provided on a unit's primary … |
| 1.3.6.1.4.1.232.121.2.3 | TablecpqnSerialPortTable | not-accessible | mandatory | There is one entry in this table for each serial port on the unit. |
| 1.3.6.1.4.1.232.121.2.3.1 | RowcpqnSerialPortEntry | not-accessible | mandatory | This entry provides information and objects to control a serial port. |
| 1.3.6.1.4.1.232.121.2.3.1.1 | ColumncpqnSPortIndex | read-only | mandatory | The index of this row. |
| 1.3.6.1.4.1.232.121.2.3.1.2 | ColumncpqnSPortIfIndex | read-only | mandatory | This object indicates which entry in the MIB-II interface table this serial port corresponds to. If this value is zero (0), then this serial port DOES NOT have… |
| 1.3.6.1.4.1.232.121.2.3.1.3 | ColumncpqnSPortModemInitStringEnable | read-write | mandatory | DURABLE: If this object is enabled(1) then after a power up or reset the unit will transmit the modem init string out the primary serial port in order to initi… |
| 1.3.6.1.4.1.232.121.2.3.1.4 | ColumncpqnSPortModemInitString | read-write | mandatory | DURABLE: This object contains a Modem Initialization String which is used to configure a modem on this port to the desired mode. Refer to the unit-specific doc… |
| 1.3.6.1.4.1.232.121.2.3.1.5 | ColumncpqnSPortModemAutoNegotiateState | read-write | mandatory | DURABLE: If enabled(1), the unit automatically detects the baud rate of incoming calls and will adjust the baud rate on this port to match. This is accomplishe… |
| 1.3.6.1.4.1.232.121.2.3.1.6 | ColumncpqnSPortBaudRate | read-write | mandatory | DURABLE: This is the current baud rate for the port. Its value must match a cpqnBaudRate entry in cpqnSupportBaudRateTable. Note that this value can automatica… |
| 1.3.6.1.4.1.232.121.2.4 | TablecpqnSupportedBaudRateTable | not-accessible | mandatory | A table of supported baud rates for this unit. |
| 1.3.6.1.4.1.232.121.2.4.1 | RowcpqnSupportedBaudRateEntry | not-accessible | mandatory | There is one entry defined for each supported baud rate for each serial port. |
| 1.3.6.1.4.1.232.121.2.4.1.1 | ColumncpqnBaudRatePortIndex | read-only | mandatory | The index into the cpqnSerialPortTable table identifying the port this entry applies to. |
| 1.3.6.1.4.1.232.121.2.4.1.2 | ColumncpqnBaudRateIndex | read-only | mandatory | The index of this row. |
| 1.3.6.1.4.1.232.121.2.4.1.3 | ColumncpqnBaudRate | read-only | mandatory | The supported baud rate for the port indexed by cpqnBaudRatePortIndex. |
| 1.3.6.1.4.1.232.121.3 | NodecpqnVersionInformation | |||
| 1.3.6.1.4.1.232.121.3.1 | TablecpqnVersionTable | not-accessible | mandatory | This table contains a list of hardware and/or software components resident in the unit. |
| 1.3.6.1.4.1.232.121.3.1.1 | RowcpqnVersionEntry | not-accessible | mandatory | There is one entry defined for each hardware and/or software component. |
| 1.3.6.1.4.1.232.121.3.1.1.1 | ColumncpqnVersionIndex | read-only | mandatory | The index into the version table. |
| 1.3.6.1.4.1.232.121.3.1.1.2 | ColumncpqnVersionType | read-only | mandatory | The component's type. |
| 1.3.6.1.4.1.232.121.3.1.1.3 | ColumncpqnVersionDesc | read-only | mandatory | A brief description of the component. This object may be empty. |
| 1.3.6.1.4.1.232.121.3.1.1.4 | ColumncpqnVersionMajor | read-only | mandatory | The MAJOR version number of the component. This is always a value between 0 and 255 and should be interpreted as a decimal number. An example is version 2.14 w… |
| 1.3.6.1.4.1.232.121.3.1.1.5 | ColumncpqnVersionMinor | read-only | mandatory | The MINOR version number of the component. This is always a value between 0 and 99 and should be interpreted as a two-digit decimal number. An example is versi… |
| 1.3.6.1.4.1.232.121.3.1.1.6 | ColumncpqnVersionStep | read-only | mandatory | The STEP identifier for the associated component. This value indicates the level or class of the component, such as prototype, production, or beta. |
| 1.3.6.1.4.1.232.121.3.1.1.7 | ColumncpqnVersionRev | read-only | mandatory | The REVISION of the step for the associated component. An example is version 1.00B3 where 3 is the revision number. |
| 1.3.6.1.4.1.232.121.3.1.1.8 | ColumncpqnVersionSerialNumber | read-only | mandatory | The serial number of this component. The format of this object is dependent on the unit type. Refer to the unit-specific documentation for more information. Th… |
| 1.3.6.1.4.1.232.121.3.1.1.9 | ColumncpqnVersionUnitId | read-only | mandatory | This is a number that uniquely identifies which unit in a collection of one or more units that this entry applies to. For example, this unit may be part of a s… |
| 1.3.6.1.4.1.232.121.3.1.1.10 | ColumncpqnVersionParentIndex | read-only | mandatory | A component represented by an entry in this table may be a sub-component of another entity or unit. In this case, the value of this object indicates this entry… |
| 1.3.6.1.4.1.232.121.4 | NodecpqnAccessControl | |||
| 1.3.6.1.4.1.232.121.4.1 | ScalarcpqnAclTelnetControl | read-write | mandatory | DURABLE: This object controls the Telnet feature of the unit. If this object is set to disabled(2), then Telnet is disabled and no Telnet session can be initia… |
| 1.3.6.1.4.1.232.121.4.2 | TablecpqnCommunityAccessIPTable | not-accessible | mandatory | This table contains objects which control access to the agent over IP. Access is restricted to only the hosts listed in this table. If a station does not have … |
| 1.3.6.1.4.1.232.121.4.2.1 | RowcpqnCommAccessIPEntry | not-accessible | mandatory | There is one entry defined for each host-community pair. |
| 1.3.6.1.4.1.232.121.4.2.1.1 | ColumncpqnAclIPIndex | read-only | mandatory | The index to this entry. |
| 1.3.6.1.4.1.232.121.4.2.1.2 | ColumncpqnAclIPRowStatus | read-write | mandatory | DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a… |
| 1.3.6.1.4.1.232.121.4.2.1.3 | ColumncpqnAclIPAddrMask | read-write | mandatory | DURABLE: This mask is applied to the source address of received SNMP/IP messages. If the masked address matches cpqnAclIPAddrMatch and the community in the SNM… |
| 1.3.6.1.4.1.232.121.4.2.1.4 | ColumncpqnAclIPAddrMatch | read-write | mandatory | DURABLE: The Masked address must match this value. |
| 1.3.6.1.4.1.232.121.4.2.1.5 | ColumncpqnAclIPCommunity | read-write | mandatory | DURABLE: The community string that is required for any requests coming from this host. The default value for this object is 'public'. |
| 1.3.6.1.4.1.232.121.4.2.1.6 | ColumncpqnAclIPRights | read-write | mandatory | DURABLE: This object controls the access granted to SNMP requests which match a mask/match and community name string. no-access(1) means that that address/comm… |
| 1.3.6.1.4.1.232.121.4.3 | TablecpqnCommunityAccessIPXTable | not-accessible | mandatory | This table contains objects which control SNMP/IPX access to the agent. Access is restricted to only the hosts listed in this table. If a station does not have… |
| 1.3.6.1.4.1.232.121.4.3.1 | RowcpqnCommAccessIPXEntry | not-accessible | mandatory | There is one entry defined for each host-community pair. |
| 1.3.6.1.4.1.232.121.4.3.1.1 | ColumncpqnAclIPXIndex | read-only | mandatory | The index to this entry. |
| 1.3.6.1.4.1.232.121.4.3.1.2 | ColumncpqnAclIPXRowStatus | read-write | mandatory | DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a… |
| 1.3.6.1.4.1.232.121.4.3.1.3 | ColumncpqnAclIPXAddrMask | read-write | mandatory | DURABLE: This mask is applied to the source address of received SNMP messages. If the masked address matches cpqnAclIPXAddrMask and the community in the SNMP p… |
| 1.3.6.1.4.1.232.121.4.3.1.4 | ColumncpqnAclIPXAddrMatch | read-write | mandatory | DURABLE: The Masked address must match this value. |
| 1.3.6.1.4.1.232.121.4.3.1.5 | ColumncpqnAclIPXCommunity | read-write | mandatory | DURABLE: The community string that is required for any requests coming from this host. The default value for this object is 'public'. |
| 1.3.6.1.4.1.232.121.4.3.1.6 | ColumncpqnAclIPXRights | read-write | mandatory | DURABLE: This object controls the access granted to SNMP/IPX requests which match a mask/match and community name string. no-access(1) means that that address/… |
| 1.3.6.1.4.1.232.121.5 | NodecpqnTrapDestinations | |||
| 1.3.6.1.4.1.232.121.5.1 | TablecpqnIPTrapDestTable | not-accessible | mandatory | A list of IP trap destination entries. |
| 1.3.6.1.4.1.232.121.5.1.1 | RowcpqnIPTrapDestEntry | not-accessible | mandatory | A destination entry which defines the IP address to which traps are sent for a community. |
| 1.3.6.1.4.1.232.121.5.1.1.1 | ColumncpqnIPTrapDestIndex | read-only | mandatory | A value that uniquely identifies this IPTrapDestEntry. |
| 1.3.6.1.4.1.232.121.5.1.1.2 | ColumncpqnIPTrapDestRowStatus | read-write | mandatory | DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a… |
| 1.3.6.1.4.1.232.121.5.1.1.3 | ColumncpqnIPTrapDestCommunity | read-write | mandatory | DURABLE: A community name to which this destination IP address belongs. |
| 1.3.6.1.4.1.232.121.5.1.1.4 | ColumncpqnIPTrapDestAddress | read-write | mandatory | DURABLE: The IP address to send traps to on behalf of this entry. |
| 1.3.6.1.4.1.232.121.5.2 | TablecpqnIPXTrapDestTable | not-accessible | mandatory | A list of IPX trap destination entries. |
| 1.3.6.1.4.1.232.121.5.2.1 | RowcpqnIPXTrapDestEntry | not-accessible | mandatory | A destination entry which defines the IPX address to which traps are sent for a community. |
| 1.3.6.1.4.1.232.121.5.2.1.1 | ColumncpqnIPXTrapDestIndex | read-only | mandatory | A value that uniquely identifies this IPXTrapDestEntry. |
| 1.3.6.1.4.1.232.121.5.2.1.2 | ColumncpqnIPXTrapDestRowStatus | read-write | mandatory | DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a… |
| 1.3.6.1.4.1.232.121.5.2.1.3 | ColumncpqnIPXTrapDestCommunity | read-write | mandatory | DURABLE: A community name to which this destination IPX address belongs. |
| 1.3.6.1.4.1.232.121.5.2.1.4 | ColumncpqnIPXTrapDestAddress | read-write | mandatory | DURABLE: The IPX address to send traps to on behalf of this entry. IPX traps are sent to the standard IPX SNMP socket number. |
| 1.3.6.1.4.1.232.121.6 | NodecpqnNetworkInfo | |||
| 1.3.6.1.4.1.232.121.6.1 | TablecpqnIpNetworkTable | not-accessible | mandatory | This table describes IP network information for each management agent interface. This could include all possible bridge groups and the SLIP interface |
| 1.3.6.1.4.1.232.121.6.1.1 | RowcpqnIpNetworkEntry | not-accessible | mandatory | There is one entry for each agent interface which describes the IP protocol information on that interface. |
| 1.3.6.1.4.1.232.121.6.1.1.1 | ColumncpqnIpIfIndex | read-only | mandatory | This is the ifIndex value of an interface in the MIB-II interface table for which this table entry applies. |
| 1.3.6.1.4.1.232.121.6.1.1.2 | ColumncpqnIpPhysAddr | read-only | mandatory | The physical address of the management agent interface. This is usually an interfaces IEEE MAC Address. For IEEE MAC address, the value will be 6 bytes in netw… |
| 1.3.6.1.4.1.232.121.6.1.1.3 | ColumncpqnIpAddr | read-write | mandatory | DURABLE: The IP Address of this Agent interface. |
| 1.3.6.1.4.1.232.121.6.1.1.4 | ColumncpqnIpNetMask | read-write | mandatory | DURABLE: The IP Subnet Mask of this Agent interface. |
| 1.3.6.1.4.1.232.121.6.1.1.5 | ColumncpqnIpRouter | read-write | mandatory | DURABLE: The IP Address of the next hop Router (default Gateway) used by this interface. |
| 1.3.6.1.4.1.232.121.6.1.1.6 | ColumncpqnIpFrameType | read-write | mandatory | DURABLE: Except when booting up, an agent communicates over IP using a single frame type defining the type of network that the IP traffic is running on: Ethern… |
| 1.3.6.1.4.1.232.121.6.1.1.7 | ColumncpqnIpAutoDiscoveryStatus | read-write | mandatory | DURABLE: This object allows a user to enable the unit to send out periodic ICMP Pings to ensure that the unit's IP Address is contained in the ARP cache of its… |
| 1.3.6.1.4.1.232.121.6.1.1.8 | ColumncpqnIpPingPktRate | read-write | mandatory | DURABLE: This object determines the rate (in seconds) at which ICMP Pings are sent out by the unit to ensure that its IP Address remains in the ARP cache of th… |
| 1.3.6.1.4.1.232.121.6.1.1.9 | ColumncpqnIpInfoSave | read-write | mandatory | Setting this object allows the changes made to any of the settable objects in this table to be written into non-volatile memory. The changes will not take effe… |
| 1.3.6.1.4.1.232.121.6.2 | TablecpqnIpxNetworkTable | not-accessible | mandatory | This table describes IPX network information for each agent interface. |
| 1.3.6.1.4.1.232.121.6.2.1 | RowcpqnIpxNetworkEntry | not-accessible | mandatory | There is one entry for each agent interface which describes the IPX protocol information on that interface. |
| 1.3.6.1.4.1.232.121.6.2.1.1 | ColumncpqnIpxIfIndex | read-only | mandatory | This is the ifIndex value of an interface in the MIB-II interface table for which this table entry applies. |
| 1.3.6.1.4.1.232.121.6.2.1.2 | ColumncpqnIpxPhysAddr | read-only | mandatory | The physical address of the management agent interface. This is usually an interfaces IEEE MAC Address. For IEEE MAC address, the value will be 6 bytes in netw… |
| 1.3.6.1.4.1.232.121.6.2.1.3 | ColumncpqnIpxFrameType | read-write | mandatory | DURABLE: The frame type with which IPX communication originating from the unit will take place. The unit will respond to a packet using the same frame type as … |
| 1.3.6.1.4.1.232.121.6.2.1.4 | ColumncpqnIpxNetworkNumber | read-only | mandatory | DURABLE: The IPX Network number for this interface. If this object is 00000000, then the unit has not yet determined the network number. |
| 1.3.6.1.4.1.232.121.6.2.1.5 | ColumncpqnIpxSAPBcastStatus | read-write | mandatory | DURABLE: The unit may generate IPX SAP broadcasts. This allows the unit to be auto-discovered. By setting this object to do-ipx-SAPs(1), the unit will generate… |
| 1.3.6.1.4.1.232.121.7 | NodecpqnBootpConfig | |||
| 1.3.6.1.4.1.232.121.7.1 | TablecpqnBootpTable | not-accessible | mandatory | A table of BOOTP configuration information for each management agent interface. This table controls the BOOTP behavior of the basic booting system. Other softw… |
| 1.3.6.1.4.1.232.121.7.1.1 | RowcpqnBootpEntry | not-accessible | mandatory | A list of BOOTP configuration information for each management agent interface. |
| 1.3.6.1.4.1.232.121.7.1.1.1 | ColumncpqnBootpIfIndex | read-only | mandatory | This is the ifIndex value of an interface in the MIB-II interface table for which this table entry applies. |
| 1.3.6.1.4.1.232.121.7.1.1.2 | ColumncpqnBootpEnable | read-write | mandatory | DURABLE: This object allows the user to enable/disable generation of BOOTP requests on the interface specified by cpqnBootpIfIndex. BOOTP requests can be gener… |
| 1.3.6.1.4.1.232.121.7.1.1.3 | ColumncpqnBootpRetries | read-write | mandatory | DURABLE: This determines the number of BOOTP requests that will be transmitted from the interface indicated by cpqnBootpIfIndex. This object is used in conjunc… |
| 1.3.6.1.4.1.232.121.7.1.1.4 | ColumncpqnBootpRetryInterval | read-write | mandatory | DURABLE: This object allows the user to set the time period (in seconds) between the transmission of BOOTP requests on the interface specified by cpqnBootpIfIn… |
| 1.3.6.1.4.1.232.121.7.1.1.5 | ColumncpqnBootpServerIpAddr | read-only | mandatory | The IP address of the BOOTP Server that last responded on the interface indicated by cpqnBootpIfIndex. If no BOOTP server has responded, then this object will … |