CPQSINFO-MIB
263 objects
No module-level DESCRIPTION found.
Imported Objects
| CPQHOST-MIB | compaq cpqHoTrapFlags |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1213-MIB | DisplayString sysName |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.2 | NodecpqSystemInfo | |||
| 1.3.6.1.4.1.232.2.1 | NodecpqSiMibRev | |||
| 1.3.6.1.4.1.232.2.1.1 | ScalarcpqSiMibRevMajor | read-only | mandatory | The major revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revis… |
| 1.3.6.1.4.1.232.2.1.2 | ScalarcpqSiMibRevMinor | read-only | mandatory | The minor revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing informati… |
| 1.3.6.1.4.1.232.2.1.3 | ScalarcpqSiMibCondition | read-only | mandatory | The overall condition. This object represents the overall status of the server information represented by this MIB. |
| 1.3.6.1.4.1.232.2.2 | NodecpqSiComponent | |||
| 1.3.6.1.4.1.232.2.2.1 | NodecpqSiInterface | |||
| 1.3.6.1.4.1.232.2.2.1.4 | NodecpqSiOsCommon | |||
| 1.3.6.1.4.1.232.2.2.1.4.1 | ScalarcpqSiOsCommonPollFreq | read-write | mandatory | The Insight Agent`s polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (… |
| 1.3.6.1.4.1.232.2.2.1.4.2 | TablecpqSiOsCommonModuleTable | not-accessible | deprecated | A table of software modules that provide an interface to the device this MIB describes. |
| 1.3.6.1.4.1.232.2.2.1.4.2.1 | RowcpqSiOsCommonModuleEntry | not-accessible | deprecated | A description of a software module that provides an interface to the device this MIB describes. |
| 1.3.6.1.4.1.232.2.2.1.4.2.1.1 | ColumncpqSiOsCommonModuleIndex | read-only | deprecated | A unique index for this module description. |
| 1.3.6.1.4.1.232.2.2.1.4.2.1.2 | ColumncpqSiOsCommonModuleName | read-only | deprecated | The module name. |
| 1.3.6.1.4.1.232.2.2.1.4.2.1.3 | ColumncpqSiOsCommonModuleVersion | read-only | deprecated | The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the a… |
| 1.3.6.1.4.1.232.2.2.1.4.2.1.4 | ColumncpqSiOsCommonModuleDate | read-only | deprecated | The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 s… |
| 1.3.6.1.4.1.232.2.2.1.4.2.1.5 | ColumncpqSiOsCommonModulePurpose | read-only | deprecated | The purpose of the module described in this entry. |
| 1.3.6.1.4.1.232.2.2.2 | NodecpqSiAsset | |||
| 1.3.6.1.4.1.232.2.2.2.1 | ScalarcpqSiSysSerialNum | read-only | mandatory | The serial number of the physical system unit. The string will be empty if the system does not report the serial number function. |
| 1.3.6.1.4.1.232.2.2.2.2 | ScalarcpqSiFormFactor | read-write | mandatory | The form factor of the system. Setting this variable to unknown will fail. |
| 1.3.6.1.4.1.232.2.2.2.3 | ScalarcpqSiAssetTag | read-write | mandatory | The customer changeable identifier that is set to the system serial number at the time of manufacture. The string will be empty if the system does not report t… |
| 1.3.6.1.4.1.232.2.2.2.4 | ScalarcpqSiOwnershipTag | read-only | mandatory | This is a customer changeable identifier that will be displayed by ROM at POST. This is an 80 byte standard ASCII character string and is Administrator Passwor… |
| 1.3.6.1.4.1.232.2.2.2.5 | ScalarcpqSiSysServiceNum | read-only | mandatory | The service number of the system unit. The string will be empty if the system does not report the system service number. |
| 1.3.6.1.4.1.232.2.2.2.6 | ScalarcpqSiSysProductId | read-only | mandatory | The product id string of the system unit. The string will be empty if the system does not report the product id. |
| 1.3.6.1.4.1.232.2.2.2.7 | ScalarcpqSiAssetTagMaxLength | read-only | optional | Maximum allowed size in bytes of the asset tag. |
| 1.3.6.1.4.1.232.2.2.2.8 | TablecpqSiVirtualSystemTable | not-accessible | optional | A table of virtual system information entries. |
| 1.3.6.1.4.1.232.2.2.2.8.1 | RowcpqSiVirtualSystemEntry | not-accessible | optional | A virtual system information table entry. |
| 1.3.6.1.4.1.232.2.2.2.8.1.1 | ColumncpqSiVirtualSystemIndex | read-only | optional | The unique index of the virtual system information entry. |
| 1.3.6.1.4.1.232.2.2.2.8.1.2 | ColumncpqSiVirtualSystemSerialNumber | read-only | optional | The HP Virtual Serial Number for the computer system package. The Virtual Serial Number is the system serial number exposed to the operating system when runnin… |
| 1.3.6.1.4.1.232.2.2.2.8.1.3 | ColumncpqSiVirtualSystemUUID | read-only | optional | The HP Virtual UUID for the computer system package. The Virtual UUID is the UUID number exposed to the operating system when running in an HP Virtual Connect … |
| 1.3.6.1.4.1.232.2.2.3 | NodecpqSiSecurity | |||
| 1.3.6.1.4.1.232.2.2.3.1 | ScalarcpqSiPowerOnPassword | read-only | mandatory | The state of the power on password feature. |
| 1.3.6.1.4.1.232.2.2.3.2 | ScalarcpqSiNetServerMode | read-only | mandatory | The state of the network server mode feature. |
| 1.3.6.1.4.1.232.2.2.3.3 | ScalarcpqSiQuickLockPassword | read-only | mandatory | The state of the quicklock password feature. |
| 1.3.6.1.4.1.232.2.2.3.4 | ScalarcpqSiQuickBlank | read-only | mandatory | The state of the quick blank screen feature. |
| 1.3.6.1.4.1.232.2.2.3.5 | ScalarcpqSiDisketteBootControl | read-only | mandatory | The state of the diskette boot control feature. |
| 1.3.6.1.4.1.232.2.2.3.6 | ScalarcpqSiSerialPortAControl | read-only | mandatory | The state of the access control for the primary serial port interface embedded in the system board. |
| 1.3.6.1.4.1.232.2.2.3.7 | ScalarcpqSiSerialPortBControl | read-only | mandatory | The state of the access control for the secondary serial port interface embedded in the system board. |
| 1.3.6.1.4.1.232.2.2.3.8 | ScalarcpqSiParallelPortControl | read-only | mandatory | The state of the access control for the parallel port interface embedded in the system board. |
| 1.3.6.1.4.1.232.2.2.3.9 | ScalarcpqSiFloppyDiskControl | read-only | mandatory | The state of the access control for the floppy diskette interface embedded in the system board. |
| 1.3.6.1.4.1.232.2.2.3.10 | ScalarcpqSiFixedDiskControl | read-only | mandatory | The state of the access control for the fixed disk interface embedded in the system board. |
| 1.3.6.1.4.1.232.2.2.3.11 | ScalarcpqSiHoodRemovedTime | read-only | mandatory | Last detection of hood removed by Smart Hood Sensor. |
| 1.3.6.1.4.1.232.2.2.3.12 | ScalarcpqSiHoodSensorConfiguration | read-only | mandatory | This is the current configuration of the Smart Cover sensor. The following values are currently defined: other(1) Smart Cover sensor is not supported on this s… |
| 1.3.6.1.4.1.232.2.2.3.13 | ScalarcpqSiSmartCoverLockStatus | read-only | mandatory | This is the current status of the Smart Cover Lock. The following values are currently defined: other(1) Smart Cover Lock is not supported on this system or ca… |
| 1.3.6.1.4.1.232.2.2.3.14 | ScalarcpqSiUSBPortControl | read-only | mandatory | The state of the access control for the Universal Serial Bus interface(s) embedded in the system board. other(1) If Status could not be determined. disabled(2)… |
| 1.3.6.1.4.1.232.2.2.3.15 | ScalarcpqSiVirtualSerialPortControl | read-only | mandatory | The state of the access control for the virtual serial port interface embedded in the system board. |
| 1.3.6.1.4.1.232.2.2.3.16 | ScalarcpqSiChassisHoodStatus | read-only | mandatory | The status of the chassis intrusion alert hardware and the hood presence. unknown (1) Unable to determine the system intrusion alert hardware presence. not-ins… |
| 1.3.6.1.4.1.232.2.2.4 | NodecpqSiSystemBoard | |||
| 1.3.6.1.4.1.232.2.2.4.1 | ScalarcpqSiProductId | read-only | mandatory | The machine product ID. This value indicates the product type of the system board in this system. The value 127 will be given if the machine ID cannot be deter… |
| 1.3.6.1.4.1.232.2.2.4.2 | ScalarcpqSiProductName | read-only | mandatory | The machine product name. The name of the machine used in this system. |
| 1.3.6.1.4.1.232.2.2.4.4 | ScalarcpqSiAuxiliaryInput | read-only | mandatory | The state of the auxiliary input (pointing) device. |
| 1.3.6.1.4.1.232.2.2.4.5 | TablecpqSiMemModuleTable | not-accessible | mandatory | A table of memory module descriptions. |
| 1.3.6.1.4.1.232.2.2.4.5.1 | RowcpqSiMemModuleEntry | not-accessible | mandatory | A memory module description. |
| 1.3.6.1.4.1.232.2.2.4.5.1.1 | ColumncpqSiMemBoardIndex | read-only | mandatory | The slot in which the memory board or cartridge is installed. A value of 0 indicates memory installed directly on the system board. |
| 1.3.6.1.4.1.232.2.2.4.5.1.2 | ColumncpqSiMemModuleIndex | read-only | mandatory | The memory module number. |
| 1.3.6.1.4.1.232.2.2.4.5.1.3 | ColumncpqSiMemModuleSize | read-only | mandatory | Module memory size in kilobytes. A kilobyte of memory is defined as 1024 bytes. A size of 0 indicates the module is not present. |
| 1.3.6.1.4.1.232.2.2.4.5.1.4 | ColumncpqSiMemModuleType | read-only | mandatory | Type of memory module installed. The value other(1) will be given if the type is not known. The value board(2) will be given if the memory module is permanentl… |
| 1.3.6.1.4.1.232.2.2.4.5.1.5 | ColumncpqSiMemModuleSpeed | read-only | deprecated | Module memory speed in nanoseconds. The value zero (0) will be given if the module speed cannot be determined. |
| 1.3.6.1.4.1.232.2.2.4.5.1.6 | ColumncpqSiMemModuleTechnology | read-only | mandatory | Technology type of memory module installed. The value other(1) will be given if the technology is not known. |
| 1.3.6.1.4.1.232.2.2.4.5.1.7 | ColumncpqSiMemModuleManufacturer | read-only | mandatory | The memory module`s manufacturer name. This field will be a null (size 0) string if the manufacturer name is not available. |
| 1.3.6.1.4.1.232.2.2.4.5.1.8 | ColumncpqSiMemModulePartNo | read-only | mandatory | The memory module`s manufacturer part number. This field will be a null (size 0) string if the manufacturer part number is not available. |
| 1.3.6.1.4.1.232.2.2.4.5.1.9 | ColumncpqSiMemModuleDate | read-only | mandatory | The memory module date of manufacture. field octets contents range ===== ====== ====================== ======== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..… |
| 1.3.6.1.4.1.232.2.2.4.5.1.10 | ColumncpqSiMemModuleSerialNo | read-write | mandatory | The memory module`s serial number. This field will be a null (size 0) string if the serial number is not available. |
| 1.3.6.1.4.1.232.2.2.4.5.1.11 | ColumncpqSiMemModuleECCStatus | read-only | mandatory | This provides the current status of the correctable memory errors for this memory module. The following status values are supported: other(1): ECC is not suppo… |
| 1.3.6.1.4.1.232.2.2.4.5.1.12 | ColumncpqSiMemModuleHwLocation | read-only | optional | A text description of the hardware location, on complex multi SBB hardware only, for the memory module. A NULL string indicates that the hardware location coul… |
| 1.3.6.1.4.1.232.2.2.4.5.1.13 | ColumncpqSiMemModuleFrequency | read-only | mandatory | The memory module frequency in MHz. The value zero (0) will be given if the module frequency cannot be determined. |
| 1.3.6.1.4.1.232.2.2.4.5.1.14 | ColumncpqSiMemModuleCellTablePtr | read-only | optional | Index for the cell in cpqSeCellTable where the memory board is installed. |
| 1.3.6.1.4.1.232.2.2.4.5.1.15 | ColumncpqSiMemModuleCellStatus | read-only | optional | This provides the current status for this memory module. The following status values are supported: other(1): The memory module status is not available ok(2): … |
| 1.3.6.1.4.1.232.2.2.4.5.1.16 | ColumncpqSiMemModulePartNoMfgr | read-only | optional | The memory module`s manufacturer`s part number. This field will be a null (size 0) string if the manufacturer part number is not available. |
| 1.3.6.1.4.1.232.2.2.4.5.1.17 | ColumncpqSiMemModuleSerialNoMfgr | read-only | optional | The memory module`s manufacturer`s serial number. This field will be a null (size 0) string if the manufacturer serial number is not available. |
| 1.3.6.1.4.1.232.2.2.4.6 | ScalarcpqSiSystemId | read-only | mandatory | The System ID. This value indicates the system ID of the system board in this system. This ID replaces the product ID used in older machines (cpqSiProductId). … |
| 1.3.6.1.4.1.232.2.2.4.7 | ScalarcpqSiSystemCpuId | read-only | mandatory | The System ID : CPU Component. This value indicates the CPU type of the system board in this system. A value of zero (0) indicates that the CPU type cannot be … |
| 1.3.6.1.4.1.232.2.2.4.8 | ScalarcpqSiFlashRomSupport | read-only | mandatory | This value indicates if this system supports flash upgradable system ROM. |
| 1.3.6.1.4.1.232.2.2.4.9 | ScalarcpqSiQuickTestRomDate | read-only | mandatory | This value indicates the date of the current quick test ROM image. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3… |
| 1.3.6.1.4.1.232.2.2.4.10 | ScalarcpqSiReboot | read-write | deprecated | This object may contain the following values: notAvailable(1) the system does not support the reboot functionality. Setting this object to notAvailable(1) has … |
| 1.3.6.1.4.1.232.2.2.4.11 | TablecpqSiProcMicroPatchTable | not-accessible | mandatory | This table lists the set of processor microcode patches that the system ROM contains. During post, the ROM will apply the appropriate patches to the CPU microc… |
| 1.3.6.1.4.1.232.2.2.4.11.1 | RowcpqSiProcMicroPatchEntry | not-accessible | mandatory | An entry describing one microcode patch contained in the system ROM. |
| 1.3.6.1.4.1.232.2.2.4.11.1.1 | ColumncpqSiProcMicroPatchIndex | read-only | mandatory | Index into the microcode patch table. |
| 1.3.6.1.4.1.232.2.2.4.11.1.2 | ColumncpqSiProcMicroPatchId | read-only | mandatory | The ID of this particular CPU microcode patch. |
| 1.3.6.1.4.1.232.2.2.4.11.1.3 | ColumncpqSiProcMicroPatchDate | read-only | mandatory | This value indicates the date of this CPU microcode patch. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1… |
| 1.3.6.1.4.1.232.2.2.4.11.1.4 | ColumncpqSiProcMicroPatchFamily | read-only | mandatory | The valid family/model/step of the processor that this CPU microcode patch applies to. field octets contents range ===== ====== ======= ===== 1 1 CPU Step 0..2… |
| 1.3.6.1.4.1.232.2.2.4.12 | ScalarcpqSiPowerMgmtStatus | read-only | mandatory | The state of power management. |
| 1.3.6.1.4.1.232.2.2.4.13 | ScalarcpqSiRebootFlags | read-write | mandatory | The Reboot Flags. This is a collection of flags used to indicate the re-boot options available. This integer is a bitmap, with each bit indicating the availabi… |
| 1.3.6.1.4.1.232.2.2.4.14 | ScalarcpqSiMemErrorIndex | read-only | mandatory | Placeholder for memory module number for ECC traps. Represents the number of the memory module for which an ECC status change has occurred. Set to 65535 if mod… |
| 1.3.6.1.4.1.232.2.2.4.15 | ScalarcpqSiMemECCCondition | read-only | mandatory | This provides the current condition of the correctable memory errors for the entire memory. The following status values are supported: other(1) : ECC is not su… |
| 1.3.6.1.4.1.232.2.2.4.16 | ScalarcpqSiMemConfigChangeData | read-only | mandatory | Text string for the memory configuration change trap. |
| 1.3.6.1.4.1.232.2.2.4.17 | ScalarcpqSiServerSystemId | read-only | mandatory | A Server System ID. This value is used to uniquely identify systems via a unique ID on systems that do not support the EISA bus. |
| 1.3.6.1.4.1.232.2.2.4.18 | ScalarcpqSiPowerScheme | read-only | optional | The current active power plan or power scheme of the system. |
| 1.3.6.1.4.1.232.2.2.4.19 | ScalarcpqSiPowerSchemeName | read-only | optional | The name of current active power plan or power scheme of the system. When cpqSiPowerScheme has a value of user-defined(6), the user defined name can be populat… |
| 1.3.6.1.4.1.232.2.2.4.20 | ScalarcpqSiCurrentPerformanceStatePointer | read-only | optional | Pointer to cpqSiPerfStateIndex in cpqSiPerfStateTable to indicate the current performance state of the system. |
| 1.3.6.1.4.1.232.2.2.4.21 | ScalarcpqSiMinPerformanceState | read-only | optional | The slowest performance state by the selected power state policy. |
| 1.3.6.1.4.1.232.2.2.4.22 | ScalarcpqSiMaxPerformanceState | read-only | optional | The fastest performance state supported by the selected power state policy. |
| 1.3.6.1.4.1.232.2.2.4.23 | TablecpqSiPerfStateTable | not-accessible | optional | A table of supported performance states of the system. |
| 1.3.6.1.4.1.232.2.2.4.23.1 | RowcpqSiPerfStateEntry | not-accessible | optional | An entry describing a supported performance state of the system. |
| 1.3.6.1.4.1.232.2.2.4.23.1.1 | ColumncpqSiPerfStateIndex | read-only | optional | Index into the performance state table. cpqSiCurrentPerformanceStatePointer should point to one of these values. |
| 1.3.6.1.4.1.232.2.2.4.23.1.2 | ColumncpqSiPerfState | read-only | optional | Performance state number. A unique number assigned to a performance state instance. |
| 1.3.6.1.4.1.232.2.2.4.23.1.3 | ColumncpqSiPerfStateCpuFrequency | read-only | optional | The processor frequency in megahertz for this performance state instance. |
| 1.3.6.1.4.1.232.2.2.4.23.1.4 | ColumncpqSiPerfStateCpuPower | read-only | optional | The processor power setting in milliwatts for this performance state instance. |
| 1.3.6.1.4.1.232.2.2.4.24 | ScalarcpqSiTPMmodule | read-only | optional | This field will be populated if TPM module is present in the system board. other(1) No record of TPM exist. absent(2) TPM module is not present in the system. … |
| 1.3.6.1.4.1.232.2.2.4.25 | ScalarcpqSiTrustedModuleType | read-only | optional | Bits[3:0] = Trusted Module Type: 1h = Not Specified 2h = TPM 1.2 3h = TPM 2.0 4h = TM 1.0 5h - 0Fh = Reserved. |
| 1.3.6.1.4.1.232.2.2.4.26 | ScalarcpqSiSystemTelemetryMetric | read-only | optional | This field specifies the system telemetry metric type. CPU Utilization(1) Overall CPU utilization of the system. Memory Bus Utilization(2) Memory Bus utilizati… |
| 1.3.6.1.4.1.232.2.2.4.27 | ScalarcpqSiSystemTelemetryThresholdStatus | read-only | optional | This field corresponds to the threshold(upper/lower) breach condition of the metric. Above Upper Threshold(1) The value has exceeded upper threshold. Below Low… |
| 1.3.6.1.4.1.232.2.2.5 | NodecpqSiBoardRev | |||
| 1.3.6.1.4.1.232.2.2.5.1 | ScalarcpqSiCurRevDate | read-only | mandatory | The current board revision configuration date in MM/DD/YY format. This is the date that the EISA Configuration Utility was used to define the current configura… |
| 1.3.6.1.4.1.232.2.2.5.2 | ScalarcpqSiPrevRevDate | read-only | mandatory | The previous board revision configuration date in MM/DD/YY format. This is the date that the EISA Configuration Utility was used to define the previous configu… |
| 1.3.6.1.4.1.232.2.2.5.3 | TablecpqSiBoardRevTable | not-accessible | mandatory | A table of board revision descriptions. |
| 1.3.6.1.4.1.232.2.2.5.3.1 | RowcpqSiBoardRevEntry | not-accessible | mandatory | A board revision description. |
| 1.3.6.1.4.1.232.2.2.5.3.1.1 | ColumncpqSiBoardRevSlotIndex | read-only | mandatory | The slot in which the board described in this entry resides. Zero (0) indicates the system board. |
| 1.3.6.1.4.1.232.2.2.5.3.1.2 | ColumncpqSiBoardRevIndex | read-only | mandatory | A number that uniquely specifies which board in a specific slot is described in this entry. Zero (0) indicates the main board in this slot. Any other number in… |
| 1.3.6.1.4.1.232.2.2.5.3.1.3 | ColumncpqSiBoardRevId | read-only | mandatory | A description of the board type. The defined types are: Type ============== System Board Processor n (n = the processor number) Memory n (n = the memory board … |
| 1.3.6.1.4.1.232.2.2.5.3.1.4 | ColumncpqSiBoardRevCur | read-only | mandatory | The current revision for the board described in this entry. This value will be N/A if there is no current revision information. |
| 1.3.6.1.4.1.232.2.2.5.3.1.5 | ColumncpqSiBoardRevPrev | read-only | mandatory | The revision for the board described in this entry prior to the current configuration. This value will be N/A if there is no previous revision information. |
| 1.3.6.1.4.1.232.2.2.5.3.1.6 | ColumncpqSiBoardRevHwLocation | read-only | optional | A text description of the hardware location, on complex multi SBB hardware only, for the board. A NULL string indicates that the hardware location could not be… |
| 1.3.6.1.4.1.232.2.2.5.4 | TablecpqSiFirmwareRevTable | not-accessible | mandatory | A table of firmware revision descriptions. |
| 1.3.6.1.4.1.232.2.2.5.4.1 | RowcpqSiFirmwareRevEntry | not-accessible | mandatory | A firmware revision description. |
| 1.3.6.1.4.1.232.2.2.5.4.1.1 | ColumncpqSiFirmwareRevIndex | read-only | mandatory | Locally-unique index for this entry. |
| 1.3.6.1.4.1.232.2.2.5.4.1.2 | ColumncpqSiFirmwareRevDesc | read-only | mandatory | Description, e.g. SRM console, ARC console, System BIOS, etc. |
| 1.3.6.1.4.1.232.2.2.5.4.1.3 | ColumncpqSiFirmwareRevString | read-only | mandatory | Version number, possibly of the form Vx.y or Vx.y-z. |
| 1.3.6.1.4.1.232.2.2.5.4.1.4 | ColumncpqSiFirmwareRevCellTablePtr | read-only | deprecated | Index for the cell in cpqSeCellTable where this firmware is located |
| 1.3.6.1.4.1.232.2.2.5.4.1.5 | ColumncpqSiFirmwareLocation | read-only | optional | Description of which board the firmware is located in. |
| 1.3.6.1.4.1.232.2.2.5.4.1.6 | ColumncpqSiFirmwareStatus | read-only | optional | The current status for this firmware. |
| 1.3.6.1.4.1.232.2.2.5.5 | TablecpqSiFirmwareCfgTable | not-accessible | mandatory | Table of soft switches and symbols maintained by the firmware. May be operating system and/or option-specific and will certainly be system-specific. This list … |
| 1.3.6.1.4.1.232.2.2.5.5.1 | RowcpqSiFirmwareCfgEntry | not-accessible | mandatory | Each entry represents one variable or symbol maintained by or stored by some instance of firmware in the system. |
| 1.3.6.1.4.1.232.2.2.5.5.1.1 | ColumncpqSiFirmwareCfgName | read-only | mandatory | The firmware configuration symbol name as visible from the console. |
| 1.3.6.1.4.1.232.2.2.5.5.1.2 | ColumncpqSiFirmwareCfgValue | read-only | mandatory | The firmware configuration symbol value. Null if none or unknown. |
| 1.3.6.1.4.1.232.2.2.6 | NodecpqSiRackServer | |||
| 1.3.6.1.4.1.232.2.2.6.1 | ScalarcpqSiRackServerShutdownRole | read-write | mandatory | This entry describes this system`s role in a rack-mounted uninterruptible power supply family. The master both communicates with the UPS and derives its power … |
| 1.3.6.1.4.1.232.2.2.6.2 | ScalarcpqSiRackServerMasterName | read-write | mandatory | This entry describes the name of the master server in a rack-mounted uninterruptible power supply family. A slave system would communicate with this server to … |
| 1.3.6.1.4.1.232.2.2.7 | NodecpqSiVideo | |||
| 1.3.6.1.4.1.232.2.2.7.1 | ScalarcpqSiVideoEdidRaw | read-only | deprecated | The raw value returned from the video EDID function. |
| 1.3.6.1.4.1.232.2.2.7.2 | ScalarcpqSiVideoDesc | read-only | deprecated | The manufacturer and model description of the video display. |
| 1.3.6.1.4.1.232.2.2.7.3 | ScalarcpqSiVideoSerialNumber | read-only | deprecated | The serial number of the video display. |
| 1.3.6.1.4.1.232.2.2.7.4 | ScalarcpqSiVideoManufactureDate | read-only | deprecated | The date of manufacture of the video display in the following format: field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..1… |
| 1.3.6.1.4.1.232.2.2.7.5 | ScalarcpqSiVideoHeight | read-only | deprecated | The maximum image height of the video display in centimeters |
| 1.3.6.1.4.1.232.2.2.7.6 | ScalarcpqSiVideoWidth | read-only | deprecated | The maximum image width of the video display in centimeters |
| 1.3.6.1.4.1.232.2.2.7.7 | ScalarcpqSiVideoMaxHorPixel | read-only | deprecated | The number of horizontal pixels in the highest resolution video mode supported. |
| 1.3.6.1.4.1.232.2.2.7.8 | ScalarcpqSiVideoMaxVertPixel | read-only | deprecated | The number of vertical pixels in the highest resolution video mode supported. |
| 1.3.6.1.4.1.232.2.2.7.9 | ScalarcpqSiVideoMaxRefreshRate | read-only | deprecated | The video refresh rate in Hz of the highest resolution video mode supported. |
| 1.3.6.1.4.1.232.2.2.8 | NodecpqSiMonitor | |||
| 1.3.6.1.4.1.232.2.2.8.1 | ScalarcpqSiMonitorOverallCondition | read-only | mandatory | This value specifies the overall condition of the system`s monitor(s). The following conditions are supported: other(1) The monitor does not support fault repo… |
| 1.3.6.1.4.1.232.2.2.8.2 | TablecpqSiMonitorTable | not-accessible | mandatory | A table of all video monitor descriptions connected to this system. |
| 1.3.6.1.4.1.232.2.2.8.2.1 | RowcpqSiMonitorEntry | not-accessible | mandatory | A video monitor description. |
| 1.3.6.1.4.1.232.2.2.8.2.1.1 | ColumncpqSiMonitorIndex | read-only | mandatory | A unique index for each video display connected to the system. |
| 1.3.6.1.4.1.232.2.2.8.2.1.2 | ColumncpqSiMonitorEdidRaw | read-only | mandatory | The raw value returned from the video EDID function. |
| 1.3.6.1.4.1.232.2.2.8.2.1.3 | ColumncpqSiMonitorDesc | read-only | mandatory | The manufacturer and model description of the video display. |
| 1.3.6.1.4.1.232.2.2.8.2.1.4 | ColumncpqSiMonitorSerialNumber | read-only | mandatory | The serial number of the video display. |
| 1.3.6.1.4.1.232.2.2.8.2.1.5 | ColumncpqSiMonitorManufactureDate | read-only | mandatory | The date of manufacture of the video display in the following format: field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..1… |
| 1.3.6.1.4.1.232.2.2.8.2.1.6 | ColumncpqSiMonitorHeight | read-only | mandatory | The maximum image height of the video display in centimeters |
| 1.3.6.1.4.1.232.2.2.8.2.1.7 | ColumncpqSiMonitorWidth | read-only | mandatory | The maximum image width of the video display in centimeters |
| 1.3.6.1.4.1.232.2.2.8.2.1.8 | ColumncpqSiMonitorMaxHorPixel | read-only | mandatory | The number of horizontal pixels in the highest resolution video mode supported. |
| 1.3.6.1.4.1.232.2.2.8.2.1.9 | ColumncpqSiMonitorMaxVertPixel | read-only | mandatory | The number of vertical pixels in the highest resolution video mode supported. |
| 1.3.6.1.4.1.232.2.2.8.2.1.10 | ColumncpqSiMonitorMaxRefreshRate | read-only | mandatory | The video refresh rate in Hz of the highest resolution video mode supported. |
| 1.3.6.1.4.1.232.2.2.8.2.1.11 | ColumncpqSiMonitorManufacturer | read-only | mandatory | The manufacturer of the video display. |
| 1.3.6.1.4.1.232.2.2.8.2.1.12 | ColumncpqSiMonitorThermalCondition | read-only | mandatory | This provides the condition of the monitor`s internal temperature. This value will be one of the following: other(1) Monitor thermal fault reporting is not sup… |
| 1.3.6.1.4.1.232.2.2.8.2.1.13 | ColumncpqSiMonitorOperationalCondition | read-only | mandatory | This provides the condition of the monitor`s operational features. This condition value will be one of the following: other(1) Monitor operational fault report… |
| 1.3.6.1.4.1.232.2.2.8.2.1.14 | ColumncpqSiMonitorStatus | read-only | mandatory | This provides the status of the monitor`s fault reporting features. This status value will be one of the following: other(1) Monitor fault reporting is not sup… |
| 1.3.6.1.4.1.232.2.2.9 | NodecpqSiHotPlugSlot | |||
| 1.3.6.1.4.1.232.2.2.9.1 | ScalarcpqSiHotPlugSlotSupported | read-only | mandatory | This value specifies if this system supports the Hot Pluggable Slot feature. |
| 1.3.6.1.4.1.232.2.2.9.2 | ScalarcpqSiHotPlugSlotCondition | read-only | mandatory | This value specifies the overall condition of the Hot Plug Slot feature. The Hot Plug condition is set as follows: other(1) When Hot Plug Slots are not support… |
| 1.3.6.1.4.1.232.2.2.9.3 | ScalarcpqSiHotPlugSlotChangeCount | read-only | mandatory | This value will be incremented each time a hot plug event occurs resulting in a change in the hot plug slot table. |
| 1.3.6.1.4.1.232.2.2.9.4 | TablecpqSiHotPlugSlotTable | not-accessible | mandatory | A list of Hot Plug Slot information entries. |
| 1.3.6.1.4.1.232.2.2.9.4.1 | RowcpqSiHotPlugSlotEntry | not-accessible | mandatory | A description of a Hot Plug Slot. |
| 1.3.6.1.4.1.232.2.2.9.4.1.1 | ColumncpqSiHotPlugSlotChassis | read-only | mandatory | The Chassis where this hot plug slot resides. |
| 1.3.6.1.4.1.232.2.2.9.4.1.2 | ColumncpqSiHotPlugSlotIndex | read-only | mandatory | The slot within the chassis for this hot plug slot. |
| 1.3.6.1.4.1.232.2.2.9.4.1.3 | ColumncpqSiHotPlugSlotBoardPresent | read-only | mandatory | This value indicates whether a board is present(2) in or absent(3) from the slot. A value of other(1) indicates the information could not be obtained. |
| 1.3.6.1.4.1.232.2.2.9.4.1.4 | ColumncpqSiHotPlugSlotPowerState | read-only | mandatory | This value is set to powerOn(2) when power is being supplied to the slot and powerOff(3) when power is not being supplied. A value of other(1) indicates the in… |
| 1.3.6.1.4.1.232.2.2.9.4.1.5 | ColumncpqSiHotPlugSlotBoardCondition | read-only | mandatory | This value specifies the condition of the hot plug slot. The hot plug condition is set as follows: other(1) When the condition could not be determined. ok(2) T… |
| 1.3.6.1.4.1.232.2.2.9.4.1.6 | ColumncpqSiHotPlugSlotErrorStatus | read-only | mandatory | This value specifies the status of the hot plug slot. The hot plug slot status is set as follows: noError(1) The slot is operating normally. generalError(2) A … |
| 1.3.6.1.4.1.232.2.2.9.4.1.7 | ColumncpqSiHotPlugSlotHwLocation | read-only | optional | A text description of the hardware location, on complex multi SBB hardware only, for the hot plug slot. A NULL string indicates that the hardware location coul… |
| 1.3.6.1.4.1.232.2.2.10 | NodecpqSiSystemBattery | |||
| 1.3.6.1.4.1.232.2.2.10.1 | ScalarcpqSiSystemBatteryOverallCondition | read-only | mandatory | This value specifies the overall condition of all of the system batteries. The following conditions are supported: other(1) The system does not use system batt… |
| 1.3.6.1.4.1.232.2.2.10.2 | TablecpqSiSysBatteryTable | not-accessible | mandatory | A table of System Batteries. |
| 1.3.6.1.4.1.232.2.2.10.2.1 | RowcpqSiSysBatteryEntry | not-accessible | mandatory | A system battery description. |
| 1.3.6.1.4.1.232.2.2.10.2.1.1 | ColumncpqSiSysBatteryIndex | read-only | mandatory | A unique index for this battery entry. |
| 1.3.6.1.4.1.232.2.2.10.2.1.2 | ColumncpqSiSysBatteryModel | read-only | mandatory | The model name for this battery. |
| 1.3.6.1.4.1.232.2.2.10.2.1.3 | ColumncpqSiSysBatterySerialNum | read-only | mandatory | The serial number for this battery. |
| 1.3.6.1.4.1.232.2.2.10.2.1.4 | ColumncpqSiSysBatteryAssetTag | read-only | mandatory | This is the customer changeable battery identifier that is set to this system battery`s serial number at the time of manufacture. The string will be empty if t… |
| 1.3.6.1.4.1.232.2.2.10.2.1.5 | ColumncpqSiSysBatteryManufacturer | read-only | mandatory | The battery`s manufacturer`s name. The string will be empty if the battery does support this function. |
| 1.3.6.1.4.1.232.2.2.10.2.1.6 | ColumncpqSiSysBatteryDate | read-only | mandatory | The battery`s manufacture date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 min… |
| 1.3.6.1.4.1.232.2.2.10.2.1.7 | ColumncpqSiSysBatterySmartVersion | read-only | mandatory | The Smart Battery Data Specification version number supported by this battery. The string will be empty if the system battery does support this function. |
| 1.3.6.1.4.1.232.2.2.10.2.1.8 | ColumncpqSiSysBatteryCondition | read-only | mandatory | This provides the current condition of this system battery. The following status values are supported: other(1) The battery does not support condition monitori… |
| 1.3.6.1.4.1.232.2.2.10.2.1.9 | ColumncpqSiSysBatteryStatus | read-only | mandatory | This provides the current status of the battery. The following status values are supported: other(1): This battery does not support status reporting. ok(2): Th… |
| 1.3.6.1.4.1.232.2.2.10.2.1.10 | ColumncpqSiSysBatteryChemistry | read-only | mandatory | The chemistry of the battery. |
| 1.3.6.1.4.1.232.2.2.10.2.1.11 | ColumncpqSiSysBatteryRemainingCap | read-only | mandatory | This is a percentage of the battery`s remaining capacity from its design capacity. If this attribute is not supported, 65535 is returned. |
| 1.3.6.1.4.1.232.2.2.10.2.1.12 | ColumncpqSiSysBatteryFirmwareRevision | read-only | mandatory | This is the revision level of the firmware on the battery. If this attribute is not supported, 255 is returned. |
| 1.3.6.1.4.1.232.2.2.10.2.1.13 | ColumncpqSiSysBatteryHardwareRevision | read-only | mandatory | This is the revision level of the hardware on the battery. If this attribute is not supported, 255 is returned. |
| 1.3.6.1.4.1.232.2.2.10.2.1.14 | ColumncpqSiSysBatteryFullCap | read-only | mandatory | This is the mWatt-Hours of the battery`s Full capacity on the current charge. If this attribute is not supported, 65535 is returned. |
| 1.3.6.1.4.1.232.2.2.10.2.1.15 | ColumncpqSiSysBatteryDesignCap | read-only | mandatory | This is the mWatt-Hours of the battery`s design capacity as specified by the manufacturer. If this attribute is not supported, 65535 is returned. |
| 1.3.6.1.4.1.232.2.2.10.2.1.16 | ColumncpqSiSysBatteryHwLocation | read-only | optional | A text description of the hardware location, on complex multi SBB hardware only, for the battery. A NULL string indicates that the hardware location could not … |
| 1.3.6.1.4.1.232.2.2.11 | NodecpqSiDockingStation | |||
| 1.3.6.1.4.1.232.2.2.11.1 | ScalarcpqSiDockingStationStatus | read-only | mandatory | This value specifies the connection of the computer system to a docking station. The following connection states are supported: notSupported(1) This system doe… |
| 1.3.6.1.4.1.232.2.2.11.2 | ScalarcpqSiDockingStationSerialNum | read-only | mandatory | The serial number of the docking station. The string will be empty if the docking station does not support a serial or the system does not interface to a docki… |
| 1.3.6.1.4.1.232.2.2.11.3 | ScalarcpqSiDockingStationModel | read-only | mandatory | The model name of the docking station. The string will be empty if the docking station does not report the model name or the system does not interface to a doc… |
| 1.3.6.1.4.1.232.2.2.11.4 | ScalarcpqSiDockingStationAssetTag | read-only | mandatory | This is a customer changeable identifier that is set to the docking station serial number at the time of manufacture. The string will be empty if the docking s… |
| 1.3.6.1.4.1.232.2.2.12 | NodecpqSiFru | |||
| 1.3.6.1.4.1.232.2.2.12.1 | TablecpqSiFruTable | not-accessible | mandatory | Table of Field Replaceable Units of system, providing inventory and asset control information. This table is referenced from logical hardware descriptions else… |
| 1.3.6.1.4.1.232.2.2.12.1.1 | RowcpqSiFruEntry | not-accessible | mandatory | Each entry represents a Field Replaceable Unit (FRU) of hardware. |
| 1.3.6.1.4.1.232.2.2.12.1.1.1 | ColumncpqSiFruIndex | read-only | mandatory | A locally-unique index value. |
| 1.3.6.1.4.1.232.2.2.12.1.1.2 | ColumncpqSiFruType | read-only | mandatory | General category of the type of FRU that this is. |
| 1.3.6.1.4.1.232.2.2.12.1.1.3 | ColumncpqSiFruDescr | read-write | mandatory | More detailed description of FRU type, if known. |
| 1.3.6.1.4.1.232.2.2.12.1.1.4 | ColumncpqSiFruVendor | read-only | mandatory | Manufacturer name or ID. |
| 1.3.6.1.4.1.232.2.2.12.1.1.5 | ColumncpqSiFruPartNumber | read-only | mandatory | Number by which this unit is orderable. |
| 1.3.6.1.4.1.232.2.2.12.1.1.6 | ColumncpqSiFruRevision | read-only | mandatory | Version number of this unit. If artwork level is available, it will appear as `Artwork: XXX` following FRU version portion. |
| 1.3.6.1.4.1.232.2.2.12.1.1.7 | ColumncpqSiFruFirmwareRevision | read-only | mandatory | The revision of the firmware, if any. Otherwise null. |
| 1.3.6.1.4.1.232.2.2.12.1.1.8 | ColumncpqSiFruSerialNumber | read-only | mandatory | The serial number of this unit`s instance. |
| 1.3.6.1.4.1.232.2.2.12.1.1.9 | ColumncpqSiFruAssetNo | read-write | mandatory | The asset number for this unit. This string may be limited. |
| 1.3.6.1.4.1.232.2.2.12.1.1.10 | ColumncpqSiFruClass | read-only | mandatory | Represents the status category of the unit. |
| 1.3.6.1.4.1.232.2.2.12.1.1.11 | ColumncpqSiFruSlotNumber | read-only | mandatory | Physical slot number of FRU. |
| 1.3.6.1.4.1.232.2.2.12.1.1.12 | ColumncpqSiFruSubAssemblyNumber | read-only | mandatory | Subassembly containing this FRU. From FRU V5.0. |
| 1.3.6.1.4.1.232.2.2.12.1.1.13 | ColumncpqSiFruAssemblyNumber | read-only | mandatory | Assembly containing this FRU. From FRU V5.0. |
| 1.3.6.1.4.1.232.2.2.12.1.1.14 | ColumncpqSiFruChassisNumber | read-only | mandatory | Chassis containing this FRU. From FRU V5.0. |
| 1.3.6.1.4.1.232.2.2.12.1.1.15 | ColumncpqSiFruPositionNumber | read-only | mandatory | Position in Chassis to help locate FRU. From FRU V5.0. |
| 1.3.6.1.4.1.232.2.2.12.1.1.16 | ColumncpqSiFruCabinetIDNumber | read-only | mandatory | Cabinet number containing this FRU. From FRU V5.0. |
| 1.3.6.1.4.1.232.2.2.12.1.1.17 | ColumncpqSiFruSiteLocation | read-only | mandatory | Site code for system containing this FRU. From FRU V5.0. |
| 1.3.6.1.4.1.232.2.2.12.1.1.18 | ColumncpqSiFruDiagStatus | read-only | mandatory | Use system status values to describe current state of the FRU. |
| 1.3.6.1.4.1.232.2.2.12.1.1.19 | ColumncpqSiFruExtendedDiagStatus | read-only | mandatory | Diagnostic Status value returned by Device Specific diagnostics. Usually through a diagnostic status register on the device. See product manual for bit descrip… |
| 1.3.6.1.4.1.232.2.2.12.1.1.20 | ColumncpqSiFruCellTablePtr | read-only | optional | Index for the cell in cpqSeCellTable where this FRU is physically located. |
| 1.3.6.1.4.1.232.2.2.12.1.1.21 | ColumncpqSiFruIOCTablePtr | read-only | optional | Index for the I/O Chassis in cpqSeIOCTablePtr where this FRU is physically located |
| 1.3.6.1.4.1.232.2.2.12.1.1.22 | ColumncpqSiFruFileId | read-only | optional | This represents the FRU file identifier |
| 1.3.6.1.4.1.232.2.2.12.1.1.23 | ColumncpqSiFruScanRev | read-only | optional | This represents FRU scan revision |
| 1.3.6.1.4.1.232.2.2.13 | NodecpqSiRackEnclosure | |||
| 1.3.6.1.4.1.232.2.2.13.1 | TablecpqSiRackEnclosureMgrTable | not-accessible | mandatory | Table of possible rack and/or enclosure based systems. |
| 1.3.6.1.4.1.232.2.2.13.1.1 | RowcpqSiRackEnclosureMgrEntry | not-accessible | mandatory | A entry for a rack and/or enclosure based system. |
| 1.3.6.1.4.1.232.2.2.13.1.1.1 | ColumncpqSiRackEnclosureMgrIndex | read-only | mandatory | A locally-unique index value. |
| 1.3.6.1.4.1.232.2.2.13.1.1.2 | ColumncpqSiRackEnclosureMgrType | read-only | mandatory | This value specifies the type of enclosure management. other(1) When the type not be determined. noEnclosureManagement(2) The server is part of a rack/enclosur… |
| 1.3.6.1.4.1.232.2.2.13.1.1.3 | ColumncpqSiRackEnclosureMgrIpAddr | read-only | mandatory | The IP address of the rack enclosure manager. The string will be empty if the enclosure does not report the information or it could not be determined. |
| 1.3.6.1.4.1.232.2.2.13.1.1.4 | ColumncpqSiRackEnclosureMgrWebLink | read-only | mandatory | The web link to the enclosure managers web based management information for the enclosure. The string will be empty if the enclosure does not report the inform… |
| 1.3.6.1.4.1.232.2.2.13.1.1.5 | ColumncpqSiRackEnclosureMgrCondition | read-only | mandatory | The overall condition of the Enclosure. For more detailed status information, follow the cpqSiEnclosureMgrWebLink through the Web Management Agent interface. o… |
| 1.3.6.1.4.1.232.2.2.13.1.1.6 | ColumncpqSiRackEnclosureMgrSerialNumber | read-only | mandatory | The serial number of the enclosure. The string will be empty if the enclosure does not report the information or it could not be determined. |
| 1.3.6.1.4.1.232.2.2.13.1.1.7 | ColumncpqSiRackEnclosureMgrModel | read-only | optional | The model name of the enclosure. The string will be empty if it could not be determined. |
| 1.3.6.1.4.1.232.2.2.13.1.1.8 | ColumncpqSiRackEnclosureMgrName | read-only | optional | The name of the enclosure. This name logically groups together the Blade servers installed in the same enclosure and it is shared with the other servers in the… |
| 1.3.6.1.4.1.232.2.2.13.1.1.9 | ColumncpqSiRackEnclosureMgrFwRev | read-only | optional | The Firmware revision of the Enclosure Manager/Onboard Administrator. The string will be empty if it could not be determined. |
| 1.3.6.1.4.1.232.2.2.13.1.1.10 | ColumncpqSiRackEnclosureMgrProductID | read-only | optional | The Enclosure product identifier. The string will be empty if it could not be determined. |
| 1.3.6.1.4.1.232.2.2.13.1.1.11 | ColumncpqSiRackEnclosureMgrUUID | read-only | optional | The Enclosure unique identifier. The string will be empty if it could not be determined. |
| 1.3.6.1.4.1.232.2.2.13.1.1.12 | ColumncpqSiRackEnclosureMgrMatrix | read-only | mandatory | Value 0 not configured in a BladeSystem Matrix environment. 1 configured in a BladeSystem Matrix environment. |
| 1.3.6.1.4.1.232.2.2.13.1.1.13 | ColumncpqSiRackEnclosureMgrMatrixID | read-only | optional | Value BladeSystem Matrix vX.Y.Z Where X major version. Y minor version. Z update version. Is only valid if cpqSiRackEnclosureMgrMatrix value is a 1. By default… |
| 1.3.6.1.4.1.232.2.2.14 | NodecpqSiServerBlade | |||
| 1.3.6.1.4.1.232.2.2.14.1 | ScalarcpqSiServerBladeEnclosureBayNumber | read-only | optional | This value specifies the enclosure bay number occupied by the blade. In case of a blade occupying multiple bays, this will be the lowest enclosure bay number o… |
| 1.3.6.1.4.1.232.2.2.14.2 | ScalarcpqSiServerBladeHeight | read-only | optional | Blade height is the Blade length. unknown(1) This indicates it could not be determined. halfHeightBlade(2) This indicates a half-height server Blade. fullHeigh… |
| 1.3.6.1.4.1.232.2.2.14.3 | ScalarcpqSiServerBladeWidth | read-only | optional | Width of the Blade in terms of Enclosure Bays. This pertain to the Blade side that connects to the enclosure backplane. |
| 1.3.6.1.4.1.232.2.2.15 | NodecpqSiRack | |||
| 1.3.6.1.4.1.232.2.2.15.1 | ScalarcpqSiRackName | read-only | optional | The rack name. This name is used to logically group together enclosures in a rack and it is shared with other enclosures in the rack. The string will be empty … |
| 1.3.6.1.4.1.232.2.2.15.2 | ScalarcpqSiRackUUID | read-only | optional | The rack unique identifier. The string will be empty if it could be determined. |
| 1.3.6.1.4.1.232.2.2.16 | NodecpqSiMP | |||
| 1.3.6.1.4.1.232.2.2.16.1 | ScalarcpqSiMPHostName | read-only | optional | The host name of the Management Processor. The string will be empty if it could not be determined. |
| 1.3.6.1.4.1.232.2.2.16.2 | ScalarcpqSiMPHealthStatus | read-only | optional | The health status of the Management Processor. |
| 1.3.6.1.4.1.232.2001 | NodecpqSiHoodRemoved | System hood is removed. The hood status has been detected as removed. The system`s hood is not in a properly installed state. This situation may result in impr… | ||
| 1.3.6.1.4.1.232.2002 | NodecpqSiMonitorConditionOK | Fault reporting features have returned to within their normal operating range for the monitor indicated by cpqSiMonitorIndex. The monitor`s condition has been … | ||
| 1.3.6.1.4.1.232.2003 | NodecpqSiMonitorConditionDegraded | A fault reporting feature has exceeded normal limits for the monitor indicated by the cpqSiMonitorIndex. The monitor`s condition is degraded due to the interna… | ||
| 1.3.6.1.4.1.232.2004 | NodecpqSiMonitorConditionFailed | A fault reporting feature has exceeded normal limits in the monitor indicated by the cpqSiMonitorIndex. The monitor`s condition has been set to failed due to a… | ||
| 1.3.6.1.4.1.232.2005 | NodecpqSiCorrMemErrStatusDegraded | Correctable memory error count has exceeded the threshold for the memory module indicated by the `cpqSiMemErrorIndex` variable. The appropriate cpqSiMemModuleE… | ||
| 1.3.6.1.4.1.232.2006 | NodecpqSiCorrMemErrStatusOk | Correctable memory error count is now below the threshold for the memory module indicated by the `cpqSiMemErrorIndex` variable. The appropriate cpqSiMemModuleE… | ||
| 1.3.6.1.4.1.232.2007 | NodecpqSiMemConfigChange | A memory configuration change has occurred. CpqSiMemConfigChangeData will indicate which memory modules slots have changed. User Action: You may want to verify… | ||
| 1.3.6.1.4.1.232.2008 | NodecpqSiHotPlugSlotBoardRemoved | Hot Plug Slot Board Removed. A Hot Plug Slot Board has been removed from the specified chassis and slot. User Action: None. | ||
| 1.3.6.1.4.1.232.2009 | NodecpqSiHotPlugSlotBoardInserted | Hot Plug Slot Board Inserted. A Hot Plug Slot Board has been inserted into the specified chassis and slot. User Action: None. | ||
| 1.3.6.1.4.1.232.2010 | NodecpqSiHotPlugSlotPowerUpFailed | Hot Plug Slot Board Failed Power-Up. A Hot Plug Slot Board has failed to power-up in the specified chassis and slot. User Action: Insure the board and all cabl… | ||
| 1.3.6.1.4.1.232.2011 | NodecpqSiSysBatteryFailure | The battery indicated by cpqSiSysBatteryIndex has failed and must be replaced. User Action: Contact your System Administrator or Authorized Reseller to order a… | ||
| 1.3.6.1.4.1.232.2012 | NodecpqSiSysBatteryChargingDegraded | Significant battery degradation has occurred with battery indicated by cpqSiSysBatteryIndex. The battery can no longer be fully recharged. User Action: If usin… | ||
| 1.3.6.1.4.1.232.2013 | NodecpqSiSysBatteryCalibrationError | Calibration is needed with battery indicated by cpqSiSysBatteryIndex. The battery can not correctly indicate capacity. User Action: Run the Power Conservation … | ||
| 1.3.6.1.4.1.232.2014 | NodecpqSiIntrusionInstalled | System intrusion alert hardware is installed. | ||
| 1.3.6.1.4.1.232.2015 | NodecpqSiIntrusionRemoved | System intrusion alert hardware is removed. | ||
| 1.3.6.1.4.1.232.2016 | NodecpqSiHoodReplaced | System hood has been replaced. | ||
| 1.3.6.1.4.1.232.2017 | NodecpqSiHoodRemovedOnPowerOff | BIOS detected a system hood removal when server power was off. | ||
| 1.3.6.1.4.1.232.2018 | NodecpqSiSysTelemetryThresholdAlert | The system telemetry metric value has either exceeded upper threshold or is below lower threshold. |