CPQSTSYS-MIB
205 objects
No module-level DESCRIPTION found.
Imported Objects
| CPQHOST-MIB | compaq cpqHoTrapFlags |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | -- enterprises Counter |
| RFC1213-MIB | DisplayString sysName |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.8 | NodecpqSsStorageSys | |||
| 1.3.6.1.4.1.232.8.1 | NodecpqSsFanStatusChange | Storage System fan status change. The agent has detected a change in the Fan Status of a storage system. The variable cpqSsBoxFanStatus indicates the current f… | ||
| 1.3.6.1.4.1.232.8.1 | NodecpqSsMibRev | |||
| 1.3.6.1.4.1.232.8.1.1 | ScalarcpqSsMibRevMajor | read-only | mandatory | The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level m… |
| 1.3.6.1.4.1.232.8.1.2 | ScalarcpqSsMibRevMinor | read-only | mandatory | The Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occu… |
| 1.3.6.1.4.1.232.8.1.3 | ScalarcpqSsMibCondition | read-only | mandatory | The overall condition (status) of the system represented by this MIB. |
| 1.3.6.1.4.1.232.8.2 | NodecpqSsDrvBox | |||
| 1.3.6.1.4.1.232.8.2.1 | TablecpqSsDrvBoxTable | not-accessible | mandatory | Drive Box Table. |
| 1.3.6.1.4.1.232.8.2.1.1 | RowcpqSsDrvBoxEntry | not-accessible | mandatory | Drive Box Entry. |
| 1.3.6.1.4.1.232.8.2.1.1.1 | ColumncpqSsBoxCntlrIndex | read-only | mandatory | Drive Box Controller Index. The controller index indicates to which adapter card instance this table entry belongs. |
| 1.3.6.1.4.1.232.8.2.1.1.2 | ColumncpqSsBoxBusIndex | read-only | mandatory | Drive Box Bus Index. The bus index indicates to which bus instance on an adapter card this table entry belongs. |
| 1.3.6.1.4.1.232.8.2.1.1.3 | ColumncpqSsBoxType | read-only | deprecated | Drive Box Type. This is the type of drive box. The following types are defined: other(1) The agent does not recognize this drive storage system. proLiant(2) Th… |
| 1.3.6.1.4.1.232.8.2.1.1.4 | ColumncpqSsBoxModel | read-only | mandatory | Drive Box Model. This is a description of the drive box`s model. This can be used for identification purposes. |
| 1.3.6.1.4.1.232.8.2.1.1.5 | ColumncpqSsBoxFWRev | read-only | mandatory | Drive Box Firmware Revision. This is the revision level of the drive box. This can be used for identification purposes. |
| 1.3.6.1.4.1.232.8.2.1.1.6 | ColumncpqSsBoxVendor | read-only | mandatory | Drive Box Vendor This is the drive box`s vendor name. This can be used for identification purposes. |
| 1.3.6.1.4.1.232.8.2.1.1.7 | ColumncpqSsBoxFanStatus | read-only | mandatory | Drive Box Fan Status. This is the current status of the fans in the drive box. This value will be one of the following: other(1) Fan monitoring is not supporte… |
| 1.3.6.1.4.1.232.8.2.1.1.8 | ColumncpqSsBoxCondition | read-only | mandatory | SCSI Drive Box Condition. This is the overall condition of the drive box. The following values are defined: other(1) The agent does not recognize the status. Y… |
| 1.3.6.1.4.1.232.8.2.1.1.9 | ColumncpqSsBoxTempStatus | read-only | mandatory | The temperature of the drive system. This value will be one of the following: other(1) Temperature monitoring is not supported by this system or it is not supp… |
| 1.3.6.1.4.1.232.8.2.1.1.10 | ColumncpqSsBoxSidePanelStatus | read-only | mandatory | Drive Box Side Panel Status. This value will be one of the following: other(1) The agent does not recognize the status. You may need to upgrade your software. … |
| 1.3.6.1.4.1.232.8.2.1.1.11 | ColumncpqSsBoxFltTolPwrSupplyStatus | read-only | mandatory | This value specifies the overall status of the fault tolerant power supply sub-system in a drive box. This value will be one of the following: other(1) The pow… |
| 1.3.6.1.4.1.232.8.2.1.1.12 | ColumncpqSsBoxBackPlaneVersion | read-only | mandatory | Drive Box Back Plane Version. This is the version of the drive box back plane. The following types are defined: other(1) The agent does not recognize this driv… |
| 1.3.6.1.4.1.232.8.2.1.1.13 | ColumncpqSsBoxTotalBays | read-only | mandatory | Drive Box Total Bays. This is the total number of bays in this storage system. If the value cannot be determined or does not apply, -1 is returned. |
| 1.3.6.1.4.1.232.8.2.1.1.14 | ColumncpqSsBoxPlacement | read-only | mandatory | Drive Box Placement. The following values are defined: other(1) The agent is unable to determine if this storage system is located internal or external to the … |
| 1.3.6.1.4.1.232.8.2.1.1.15 | ColumncpqSsBoxDuplexOption | read-only | mandatory | Drive Box Duplex Option. The following values are defined: other(1) The agent is unable to determine if this storage system is duplexed. notDuplexed(2) This st… |
| 1.3.6.1.4.1.232.8.2.1.1.16 | ColumncpqSsBoxBoardRevision | read-only | mandatory | Drive Box Board Revision. This is the board revision of this storage system backplane. |
| 1.3.6.1.4.1.232.8.2.1.1.17 | ColumncpqSsBoxSerialNumber | read-only | mandatory | Drive Box Serial Number. This is the drive box`s serial number which is normally display on the front panel. This can be used for identification purposes. If t… |
| 1.3.6.1.4.1.232.8.2.1.1.18 | ColumncpqSsBoxCntlrHwLocation | read-only | mandatory | A text description of the hardware location of the controller to which this box is attached. A NULL string indicates that the hardware location could not be de… |
| 1.3.6.1.4.1.232.8.2.1.1.19 | ColumncpqSsBoxBackplaneSpeed | read-only | mandatory | Drive Box Backplane Speed. The following values are defined: other(1) The agent is unable to determine the backplane speed for this storage system. ultra3(2) T… |
| 1.3.6.1.4.1.232.8.2.1.1.20 | ColumncpqSsBoxConnectionType | read-only | mandatory | Drive Box Connection Type. The following values are defined: other(1) The agent is unable to determine the type of connection to this storage system. scsiAttac… |
| 1.3.6.1.4.1.232.8.2.1.1.21 | ColumncpqSsBoxHostConnector | read-only | mandatory | Drive Box Host Connector. This is the host connector to which the drive box is attached. If the host connector cannot be determined, the agent will return a NU… |
| 1.3.6.1.4.1.232.8.2.1.1.22 | ColumncpqSsBoxBoxOnConnector | read-only | mandatory | Drive Box, Box on Connector. The box on connector indicates which box instance this table entry belongs. The instances start at one and increment for each box … |
| 1.3.6.1.4.1.232.8.2.1.1.23 | ColumncpqSsBoxLocationString | read-only | mandatory | Drive Box Location String. This string describes the location of the drive box in relation to the controller to which it is attached. If the location string ca… |
| 1.3.6.1.4.1.232.8.2.1.1.24 | ColumncpqSsBoxInitiatorSasAddress | read-only | mandatory | Drive Box Initiator SAS Address String. This string describes the SAS address of the initiator connected to the drive box. If the drive box initiator SAS addre… |
| 1.3.6.1.4.1.232.8.2.1.1.25 | ColumncpqSsBoxTargetSasAddress | read-only | mandatory | Drive Box Target SAS Address String. This string describes the SAS address of the target (i.e. the drive box itself). If the drive box target SAS address strin… |
| 1.3.6.1.4.1.232.8.2.1.1.26 | ColumncpqSsBoxLocalManageIpAddress | read-only | mandatory | Drive Box Local Management IP Address String. This string reports the management IP address for the storage box primary controller. If the drive box local mana… |
| 1.3.6.1.4.1.232.8.2.1.1.27 | ColumncpqSsBoxPartnerManageIpAddress | read-only | mandatory | Drive Box Partner Management IP Address String. This string reports the management IP address for the storage box partner controller. If the drive box partner … |
| 1.3.6.1.4.1.232.8.2.1.1.28 | ColumncpqSsBoxConnectionStatus | read-only | mandatory | Drive Box Connection Status. The following values are defined: other(1) The agent is unable to determine the storage system`s connection status. notSupported(2… |
| 1.3.6.1.4.1.232.8.2.1.1.29 | ColumncpqSsBoxTargetBasedManagement | read-only | mandatory | Drive Box Target Based Management. The following values are defined: other(1) The agent is unable to determine if this storage system supports target based man… |
| 1.3.6.1.4.1.232.8.2.1.1.30 | ColumncpqSsBoxGSIStatus | read-only | mandatory | Drive Box GSI Status. This is the status based on the stateof the Global Service Indicator. The following values are defined: other(1) The agent does not recog… |
| 1.3.6.1.4.1.232.8.2.1.1.31 | ColumncpqSsBoxGSIMessages | read-only | mandatory | Drive Box GSI Messages. This string will contain any error message from the drive box describing why the Global Service Indicator is set. Please refer to User … |
| 1.3.6.1.4.1.232.8.2.2 | NodecpqSsBoxExtended | |||
| 1.3.6.1.4.1.232.8.2.2.1 | TablecpqSsChassisTable | not-accessible | mandatory | Storage System Chassis Table. |
| 1.3.6.1.4.1.232.8.2.2.1.1 | RowcpqSsChassisEntry | not-accessible | mandatory | Storage System Chassis Entry. |
| 1.3.6.1.4.1.232.8.2.2.1.1.1 | ColumncpqSsChassisIndex | read-only | mandatory | Storage System Chassis Index. The chassis index uniquely identifies a storage system chassis. |
| 1.3.6.1.4.1.232.8.2.2.1.1.2 | ColumncpqSsChassisConnectionType | read-only | mandatory | Storage System Chassis Connection Type. The following values are defined: other(1) The agent is unable to determine the type of connection to this chassis. fib… |
| 1.3.6.1.4.1.232.8.2.2.1.1.3 | ColumncpqSsChassisSerialNumber | read-only | mandatory | Storage System Chassis Serial Number. This is the storage system chassis`s serial number which is normally displayed on the front panel. This can be used for i… |
| 1.3.6.1.4.1.232.8.2.2.1.1.4 | ColumncpqSsChassisName | read-only | mandatory | Storage System Chassis Name. This is a user defined name for this storage system chassis. |
| 1.3.6.1.4.1.232.8.2.2.1.1.5 | ColumncpqSsChassisSystemBoardSerNum | read-only | mandatory | Storage System Chassis System Controller Board Serial Number. This is the system controller board`s serial number. This can be used for identification purposes. |
| 1.3.6.1.4.1.232.8.2.2.1.1.6 | ColumncpqSsChassisSystemBoardRev | read-only | mandatory | Storage System Chassis System Controller Board Revision. This is the system controller board revision. |
| 1.3.6.1.4.1.232.8.2.2.1.1.7 | ColumncpqSsChassisPowerBoardSerNum | read-only | mandatory | Storage System Chassis Power Backplane Board Serial Number. This is the power backplane board`s serial number. This can be used for identification purposes. |
| 1.3.6.1.4.1.232.8.2.2.1.1.8 | ColumncpqSsChassisPowerBoardRev | read-only | mandatory | Storage System Chassis Power Backplane Board Revision. This is the power backplane board revision. |
| 1.3.6.1.4.1.232.8.2.2.1.1.9 | ColumncpqSsChassisScsiBoardSerNum | read-only | mandatory | Storage System Chassis SCSI Drive Backplane Board Serial Number. This is the SCSI drive backplane board`s serial number. This can be used for identification pu… |
| 1.3.6.1.4.1.232.8.2.2.1.1.10 | ColumncpqSsChassisScsiBoardRev | read-only | mandatory | Storage System Chassis SCSI Drive Backplane Board Revision. This is the SCSI drive backplane board revision. |
| 1.3.6.1.4.1.232.8.2.2.1.1.11 | ColumncpqSsChassisOverallCondition | read-only | mandatory | Storage System Chassis Overall Condition. This is the condition of the storage system chassis and all of its components. The following values are defined: othe… |
| 1.3.6.1.4.1.232.8.2.2.1.1.12 | ColumncpqSsChassisPowerSupplyCondition | read-only | mandatory | Storage System Power Supply Condition. This is the aggregate condition of all power supplies in the storage system chassis. The following values are defined: o… |
| 1.3.6.1.4.1.232.8.2.2.1.1.13 | ColumncpqSsChassisFanCondition | read-only | mandatory | Storage System Fan Condition. This is the aggregate condition of all fan modules in the storage system chassis. The following values are defined: other(1) The … |
| 1.3.6.1.4.1.232.8.2.2.1.1.14 | ColumncpqSsChassisTemperatureCondition | read-only | mandatory | Storage System Temperature Condition. This is the aggregate condition of all the temperatur sensors in the storage system chassis. The following values are def… |
| 1.3.6.1.4.1.232.8.2.2.1.1.15 | ColumncpqSsChassisFcaCntlrCondition | read-only | mandatory | Storage System Fibre Channel Array Controller Condition. This is the aggregate condition of all Fibre Channel Array controllers in the storage system chassis. … |
| 1.3.6.1.4.1.232.8.2.2.1.1.16 | ColumncpqSsChassisFcaLogicalDriveCondition | read-only | mandatory | Storage System Fibre Channel Array Logical Drive Condition. This is the aggregate condition of all Fibre Channel Array Logical Drives in this storage system ch… |
| 1.3.6.1.4.1.232.8.2.2.1.1.17 | ColumncpqSsChassisFcaPhysDrvCondition | read-only | mandatory | Storage System Fibre Channel Array Physical Drive Condition. This is the aggregate condition of all Fibre Channel Array Physical Drives in this storage system … |
| 1.3.6.1.4.1.232.8.2.2.1.1.18 | ColumncpqSsChassisTime | read-only | mandatory | Storage System Chassis Time. This is the storage system chassis`s time in tenths of seconds. If the chassis time is not supported, the agent will return 0. |
| 1.3.6.1.4.1.232.8.2.2.1.1.19 | ColumncpqSsChassisModel | read-only | mandatory | Storage System Chassis Model. The following values are defined: other(1) The agent is unable to determine the model of this chassis. ra4x00(2) Compaq StorageWo… |
| 1.3.6.1.4.1.232.8.2.2.1.1.20 | ColumncpqSsChassisBackplaneCondition | read-only | mandatory | Storage System Backplane Condition. This is the aggregate condition of all the backplanes for the storage system chassis. The following values are defined: oth… |
| 1.3.6.1.4.1.232.8.2.2.1.1.21 | ColumncpqSsChassisFcaTapeDrvCondition | read-only | mandatory | Storage System Array Tape Drive Condition. This is the aggregate condition of all tape drives in this storage system chassis. The following values are defined:… |
| 1.3.6.1.4.1.232.8.2.2.1.1.22 | ColumncpqSsChassisRsoStatus | read-only | mandatory | Storage System Chassis Recovery Server Option Status. The following values are defined: other(1) The recovery server option status cannot be determined for thi… |
| 1.3.6.1.4.1.232.8.2.2.1.1.23 | ColumncpqSsChassisRsoCondition | read-only | mandatory | Storage System Chassis Recovery Server Option Condition. This is the condition of the recovery server option. The following values are defined: other(1) The ag… |
| 1.3.6.1.4.1.232.8.2.2.1.1.24 | ColumncpqSsChassisScsiIoModuleType | read-only | mandatory | Storage System Chassis SCSI I/O Module Type. The following values are defined: other(1) The agent does not recognize SCSI I/O module type. You may need to upgr… |
| 1.3.6.1.4.1.232.8.2.2.1.1.25 | ColumncpqSsChassisPreferredPathMode | read-only | mandatory | Array Controller Preferred Path Mode. This is the storage system active/active preferred path mode. The following values are valid: other (1) Indicates that th… |
| 1.3.6.1.4.1.232.8.2.2.1.1.26 | ColumncpqSsChassisProductId | read-only | mandatory | Storage System Chassis Product Identifier. This is the storage system chassis's product identifier. This can be used for identification purposes. If the produc… |
| 1.3.6.1.4.1.232.8.2.2.2 | TablecpqSsIoSlotTable | not-accessible | mandatory | Storage System I/O Slot Table. |
| 1.3.6.1.4.1.232.8.2.2.2.1 | RowcpqSsIoSlotEntry | not-accessible | mandatory | Storage System I/O Slot Entry. |
| 1.3.6.1.4.1.232.8.2.2.2.1.1 | ColumncpqSsIoSlotChassisIndex | read-only | mandatory | Storage System I/O Slot Chassis Index. The chassis index uniquely identifies a storage system chassis. |
| 1.3.6.1.4.1.232.8.2.2.2.1.2 | ColumncpqSsIoSlotIndex | read-only | mandatory | Storage System I/O Slot Index. This index uniquely identifies a storage system I/O Slot. |
| 1.3.6.1.4.1.232.8.2.2.2.1.3 | ColumncpqSsIoSlotControllerType | read-only | mandatory | Storage System I/O Slot Controller Type. The following values are defined: other(1) The agent is unable to determine if anything is installed in this storage s… |
| 1.3.6.1.4.1.232.8.2.2.3 | TablecpqSsPowerSupplyTable | not-accessible | mandatory | Storage System Power Supply Table. |
| 1.3.6.1.4.1.232.8.2.2.3.1 | RowcpqSsPowerSupplyEntry | not-accessible | mandatory | Storage System Power Supply Entry. |
| 1.3.6.1.4.1.232.8.2.2.3.1.1 | ColumncpqSsPowerSupplyChassisIndex | read-only | mandatory | Storage System Power Supply Chassis Index. The chassis index uniquely identifies a storage system chassis. |
| 1.3.6.1.4.1.232.8.2.2.3.1.2 | ColumncpqSsPowerSupplyIndex | read-only | mandatory | Storage System Power Supply Bay. This index uniquely identifies a power supply bay. |
| 1.3.6.1.4.1.232.8.2.2.3.1.3 | ColumncpqSsPowerSupplyBay | read-only | mandatory | Storage System Power Supply Bay. The following values are defined: other(1) The agent does not recognize the bay. You may need to upgrade your software. powerB… |
| 1.3.6.1.4.1.232.8.2.2.3.1.4 | ColumncpqSsPowerSupplyStatus | read-only | mandatory | Storage System Power Supply Status. The following values are defined: other(1) The agent is unable to determine if this storage system power supply bay is occu… |
| 1.3.6.1.4.1.232.8.2.2.3.1.5 | ColumncpqSsPowerSupplyUpsStatus | read-only | mandatory | Storage System Power Supply Uninterruptible Power Supply (UPS) Status. The following values are defined: other(1) The agent is unable to determine if this powe… |
| 1.3.6.1.4.1.232.8.2.2.3.1.6 | ColumncpqSsPowerSupplyCondition | read-only | mandatory | Storage System Power Supply Condition. This is the condition of the storage system chassis and all of its components. The following values are defined: other(1… |
| 1.3.6.1.4.1.232.8.2.2.3.1.7 | ColumncpqSsPowerSupplySerialNumber | read-only | mandatory | Storage System Power Supply Serial Number. This is the power supply's serial number. This can be used for identification purposes. If the serial number is not … |
| 1.3.6.1.4.1.232.8.2.2.3.1.8 | ColumncpqSsPowerSupplyBoardRevision | read-only | mandatory | Storage System Power Supply Board Revision. This is the power supply board revision. If the board revision is not supported, the agent will return a NULL strin… |
| 1.3.6.1.4.1.232.8.2.2.3.1.9 | ColumncpqSsPowerSupplyFirmwareRevision | read-only | mandatory | Storage System Power Supply Firmware Revision. This is the power supply firmware revision. If the firmware revision is not supported, the agent will return a N… |
| 1.3.6.1.4.1.232.8.2.2.4 | TablecpqSsFanModuleTable | not-accessible | mandatory | Storage System Fan Module Table. |
| 1.3.6.1.4.1.232.8.2.2.4.1 | RowcpqSsFanModuleEntry | not-accessible | mandatory | Storage System Fan Module Entry. |
| 1.3.6.1.4.1.232.8.2.2.4.1.1 | ColumncpqSsFanModuleChassisIndex | read-only | mandatory | Storage System Fan Module Chassis Index. The chassis index uniquely identifies a storage system chassis. |
| 1.3.6.1.4.1.232.8.2.2.4.1.2 | ColumncpqSsFanModuleIndex | read-only | mandatory | Storage System Fan Module Index. This index uniquely identifies a storage system fan module. |
| 1.3.6.1.4.1.232.8.2.2.4.1.3 | ColumncpqSsFanModuleStatus | read-only | mandatory | Storage System Fan Module Status. The following values are defined: other(1) The agent is unable to determine if this storage system fan module is installed. n… |
| 1.3.6.1.4.1.232.8.2.2.4.1.4 | ColumncpqSsFanModuleCondition | read-only | mandatory | Storage System Fan Module Condition. This is the condition of the storage system fan module. The following values are defined: other(1) The agent does not reco… |
| 1.3.6.1.4.1.232.8.2.2.4.1.5 | ColumncpqSsFanModuleLocation | read-only | mandatory | Storage System Fan Module Location. The following values are defined: other(1) The agent is unable to determine the location of this storage system fan module.… |
| 1.3.6.1.4.1.232.8.2.2.4.1.6 | ColumncpqSsFanModuleSerialNumber | read-only | mandatory | Storage System Fan Module Serial Number. This is the fan module's serial number. This can be used for identification purposes. |
| 1.3.6.1.4.1.232.8.2.2.4.1.7 | ColumncpqSsFanModuleBoardRevision | read-only | mandatory | Storage System Fan Module Board Revision. This is the fan module board revision. |
| 1.3.6.1.4.1.232.8.2.2.5 | TablecpqSsTempSensorTable | not-accessible | mandatory | Storage System Temperature Sensor Table. |
| 1.3.6.1.4.1.232.8.2.2.5.1 | RowcpqSsTempSensorEntry | not-accessible | mandatory | Storage System Temperature Sensor Entry. |
| 1.3.6.1.4.1.232.8.2.2.5.1.1 | ColumncpqSsTempSensorChassisIndex | read-only | mandatory | Storage System Temperature Sensor Chassis Index. The chassis index uniquely identifies a storage system chassis. |
| 1.3.6.1.4.1.232.8.2.2.5.1.2 | ColumncpqSsTempSensorIndex | read-only | mandatory | Storage System Temperature Sensor Index. This index uniquely identifies a temperature sensor. |
| 1.3.6.1.4.1.232.8.2.2.5.1.3 | ColumncpqSsTempSensorStatus | read-only | mandatory | Storage System Temperature Sensor Status. The following values are defined: other(1) The agent is unable to determine if the storage system temperature sensor … |
| 1.3.6.1.4.1.232.8.2.2.5.1.4 | ColumncpqSsTempSensorCondition | read-only | mandatory | Storage System Fan Module Condition. This is the condition of the storage system temperature sensor. The following values are defined: other(1) The agent does … |
| 1.3.6.1.4.1.232.8.2.2.5.1.5 | ColumncpqSsTempSensorLocation | read-only | mandatory | Storage System Fan Module Location. The following values are defined: other(1) The agent is unable to determine the location of this storage system temperature… |
| 1.3.6.1.4.1.232.8.2.2.5.1.6 | ColumncpqSsTempSensorCurrentValue | read-only | mandatory | Storage System Temperature Sensor Current Value. The current value of the temperature sensor in degrees Celsius. |
| 1.3.6.1.4.1.232.8.2.2.5.1.7 | ColumncpqSsTempSensorLimitValue | read-only | mandatory | Storage System Temperature Sensor Limit Value. The limit value of the temperature sensor in degrees Celsius. |
| 1.3.6.1.4.1.232.8.2.2.5.1.8 | ColumncpqSsTempSensorHysteresisValue | read-only | mandatory | Storage System Temperature Sensor Hysteresis Value. The hysteresis value of the temperature sensor in degrees Celsius. |
| 1.3.6.1.4.1.232.8.2.2.6 | TablecpqSsBackplaneTable | not-accessible | mandatory | Storage System SCSI Backplane Table. |
| 1.3.6.1.4.1.232.8.2.2.6.1 | RowcpqSsBackplaneEntry | not-accessible | mandatory | Storage System SCSI Backplane Entry. |
| 1.3.6.1.4.1.232.8.2.2.6.1.1 | ColumncpqSsBackplaneChassisIndex | read-only | mandatory | Storage System Backplane Chassis Index. The chassis index uniquely identifies a storage system chassis. |
| 1.3.6.1.4.1.232.8.2.2.6.1.2 | ColumncpqSsBackplaneIndex | read-only | mandatory | Storage System Backplane Index. This index uniquely identifies a storage system backplane. |
| 1.3.6.1.4.1.232.8.2.2.6.1.3 | ColumncpqSsBackplaneFWRev | read-only | mandatory | Storage System Backplane Firmware Revision. This is the revision level of storage system backplane. |
| 1.3.6.1.4.1.232.8.2.2.6.1.4 | ColumncpqSsBackplaneDriveBays | read-only | mandatory | Storage System Backplane Drive Bays. This is the number of bays on this storage system backplane. |
| 1.3.6.1.4.1.232.8.2.2.6.1.5 | ColumncpqSsBackplaneDuplexOption | read-only | mandatory | Storage System Backplane Duplex Option. The following values are defined: other (1) The agent is unable to determine if this storage system is duplexed. notDup… |
| 1.3.6.1.4.1.232.8.2.2.6.1.6 | ColumncpqSsBackplaneCondition | read-only | mandatory | Storage System Backplane Condition. This is the overall condition of the backplane. The following values are defined: other(1) The agent does not recognize the… |
| 1.3.6.1.4.1.232.8.2.2.6.1.7 | ColumncpqSsBackplaneVersion | read-only | mandatory | Storage System Backplane Version. This is the version of the drive box back plane. |
| 1.3.6.1.4.1.232.8.2.2.6.1.8 | ColumncpqSsBackplaneVendor | read-only | mandatory | Storage System Backplane Vendor This is the storage box`s vendor name. This can be used for identification purposes. |
| 1.3.6.1.4.1.232.8.2.2.6.1.9 | ColumncpqSsBackplaneModel | read-only | mandatory | Storage System Backplane Model. This is a description of the storage system`s model. This can be used for identification purposes. |
| 1.3.6.1.4.1.232.8.2.2.6.1.10 | ColumncpqSsBackplaneFanStatus | read-only | mandatory | Storage System Backplane Fan Status. This is the current status of the fans in the storage system. This value will be one of the following: other(1) The agent … |
| 1.3.6.1.4.1.232.8.2.2.6.1.11 | ColumncpqSsBackplaneTempStatus | read-only | mandatory | Storage System Backplane Fan Status. This value will be one of the following: other(1) The agent is unable to determine if this storage system has temperature … |
| 1.3.6.1.4.1.232.8.2.2.6.1.12 | ColumncpqSsBackplaneFtpsStatus | read-only | mandatory | Storage System Backplane Fault Tolerant Power Supply Status. This value specifies the overall status of the redundant power supply in a drive box. This value w… |
| 1.3.6.1.4.1.232.8.2.2.6.1.13 | ColumncpqSsBackplaneSerialNumber | read-only | mandatory | Storage System Backplane Serial Number. This is the storage system backplane serial number which is normally displayed on the front bezel. This can be used for… |
| 1.3.6.1.4.1.232.8.2.2.6.1.14 | ColumncpqSsBackplanePlacement | read-only | mandatory | Storage System Backplane Placement. The following values are defined: other(1) The agent is unable to determine if this storage system is located internal or e… |
| 1.3.6.1.4.1.232.8.2.2.6.1.15 | ColumncpqSsBackplaneBoardRevision | read-only | mandatory | Storage System Backplane Board Revision. This is the board revision of this storage system backplane. |
| 1.3.6.1.4.1.232.8.2.2.6.1.16 | ColumncpqSsBackplaneSpeed | read-only | mandatory | Storage System Backplane Speed. The following values are defined: other(1) The agent is unable to determine the backplane speed for this storage system. ultra3… |
| 1.3.6.1.4.1.232.8.2.2.6.1.17 | ColumncpqSsBackplaneConnectionType | read-only | mandatory | Backlane Box Connection Type. The following values are defined: other(1) The agent is unable to determine the type of connection to this backplane. scsiAttache… |
| 1.3.6.1.4.1.232.8.2.2.6.1.18 | ColumncpqSsBackplaneConnector | read-only | mandatory | Backplane Connector. This is the connector to which the backplane is attached. If the backplane connector cannot be determined, the agent will return a NULL st… |
| 1.3.6.1.4.1.232.8.2.2.6.1.19 | ColumncpqSsBackplaneOnConnector | read-only | mandatory | Backplane on Connector. The backplane on connector indicates to which backplane instance this table entry belongs. The instances start at one and increment for… |
| 1.3.6.1.4.1.232.8.2.2.6.1.20 | ColumncpqSsBackplaneLocationString | read-only | mandatory | Backplane Location String. This string describes the location of the backplane in relation to the controller to which it is attached. If the location string ca… |
| 1.3.6.1.4.1.232.8.2.2.7 | TablecpqSsFibreAttachmentTable | not-accessible | mandatory | Storage System Fibre Attachment Table. |
| 1.3.6.1.4.1.232.8.2.2.7.1 | RowcpqSsFibreAttachmentEntry | not-accessible | mandatory | Storage System Fibre Attachment Entry. |
| 1.3.6.1.4.1.232.8.2.2.7.1.1 | ColumncpqSsFibreAttachmentIndex | read-only | mandatory | Storage System Fibre Attachment Index. The index uniquely identifies a Fibre Attachment association entry. |
| 1.3.6.1.4.1.232.8.2.2.7.1.2 | ColumncpqSsFibreAttachmentHostControllerIndex | read-only | mandatory | Storage System Fibre Attachment Host Controller Index. The host controller index indicates which host controller is associated with this entry. This is equal t… |
| 1.3.6.1.4.1.232.8.2.2.7.1.3 | ColumncpqSsFibreAttachmentHostControllerPort | read-only | mandatory | Storage System Fibre Attachment Host Controller Port. This is the Fibre port number of the host controller. For each host controller, the port number starts at… |
| 1.3.6.1.4.1.232.8.2.2.7.1.4 | ColumncpqSsFibreAttachmentDeviceType | read-only | mandatory | Storage System Fibre Attachment Device Type. This is the type of device associated with this entry. The following values are defined: other(1) The agent is una… |
| 1.3.6.1.4.1.232.8.2.2.7.1.5 | ColumncpqSsFibreAttachmentDeviceIndex | read-only | mandatory | Storage System Fibre Attachment Device Index. The is the index for the Fibre attached device. For a Fibre attached storage system, this is equal to cpqSsChassi… |
| 1.3.6.1.4.1.232.8.2.2.7.1.6 | ColumncpqSsFibreAttachmentDevicePort | read-only | mandatory | Storage System Fibre Attachment Device Port. This is the Fibre port on a device. For a Fibre attached storage system, this is equal to cpqFcaCntlrBoxIoSlot fro… |
| 1.3.6.1.4.1.232.8.2.2.8 | TablecpqSsScsiAttachmentTable | not-accessible | mandatory | Storage System SCSI Attachment Table. |
| 1.3.6.1.4.1.232.8.2.2.8.1 | RowcpqSsScsiAttachmentEntry | not-accessible | mandatory | Storage System SCSI Attachment Entry. |
| 1.3.6.1.4.1.232.8.2.2.8.1.1 | ColumncpqSsScsiAttachmentIndex | read-only | mandatory | Storage System SCSI Attachment Index. The index uniquely identifies a SCSI Attachment association entry. |
| 1.3.6.1.4.1.232.8.2.2.8.1.2 | ColumncpqSsScsiAttachmentControllerIndex | read-only | mandatory | Storage System SCSI Attachment Controller Index. The controller index indicates which internal array controller is associated with this entry. This is equal to… |
| 1.3.6.1.4.1.232.8.2.2.8.1.3 | ColumncpqSsScsiAttachmentControllerPort | read-only | mandatory | Storage System SCSI Attachment Controller Port. The controller port indicates which SCSI port of an internal controller is associated with this entry. |
| 1.3.6.1.4.1.232.8.2.2.8.1.4 | ColumncpqSsScsiAttachmentControllerTarget | read-only | mandatory | Storage System SCSI Attachment Controller Target. The controller target indicates which SCSI target is associated with this entry. |
| 1.3.6.1.4.1.232.8.2.2.8.1.5 | ColumncpqSsScsiAttachmentControllerLun | read-only | mandatory | Storage System SCSI Attachment Controller Lun. The controller Lun indicates which SCSI Lun is associated with this entry. |
| 1.3.6.1.4.1.232.8.2.2.8.1.6 | ColumncpqSsScsiAttachmentChassisIndex | read-only | mandatory | Storage System SCSI Attachment Chassis Index. The is the index for the SCSI attached storage system. This is equal to cpqSsChassisIndex from the Storage System… |
| 1.3.6.1.4.1.232.8.2.2.8.1.7 | ColumncpqSsScsiAttachmentChassisIoSlot | read-only | mandatory | Storage System SCSI Attachment Chassis I/O Slot. This is the I/O slot in the SCSI attached storage system. This is equal to cpqFcaCntlrBoxIoSlot from the Fibre… |
| 1.3.6.1.4.1.232.8.2.2.8.1.8 | ColumncpqSsScsiAttachmentPathStatus | read-only | mandatory | Storage System SCSI Attachment Path Status. This is the status of this path to the chassis. The following values are defined: other(1) The agent does not recog… |
| 1.3.6.1.4.1.232.8.2.2.8.1.9 | ColumncpqSsScsiAttachmentPathCondition | read-only | mandatory | Storage System SCSI Attachment Path Condition. This is the condition of this path to the chassis. |
| 1.3.6.1.4.1.232.8.2.3 | TablecpqSsDrvBoxPathTable | not-accessible | mandatory | Drive Box Access Path Table. |
| 1.3.6.1.4.1.232.8.2.3.1 | RowcpqSsDrvBoxPathEntry | not-accessible | mandatory | Drive Box Access Path Entry. |
| 1.3.6.1.4.1.232.8.2.3.1.1 | ColumncpqSsDrvBoxPathCntlrIndex | read-only | mandatory | Drive Box Access Path Controller Index. The controller index indicates to which adapter card instance this table entry belongs. |
| 1.3.6.1.4.1.232.8.2.3.1.2 | ColumncpqSsDrvBoxPathBoxIndex | read-only | mandatory | Drive Box Access Path Box Index. The box index indicates to which box instance on an adapter card this table entry belongs. The value of this index is the same… |
| 1.3.6.1.4.1.232.8.2.3.1.3 | ColumncpqSsDrvBoxPathIndex | read-only | mandatory | Drive Box Access Path Index. This path index keeps track of multiple instances of access paths from a controller to a storage box. This number, along with the … |
| 1.3.6.1.4.1.232.8.2.3.1.4 | ColumncpqSsDrvBoxPathStatus | read-only | mandatory | Drive Box Access Path Status. This shows the status of the drive box access path. The following values are valid: Other (1) Indicates that the instrument agent… |
| 1.3.6.1.4.1.232.8.2.3.1.5 | ColumncpqSsDrvBoxPathCurrentRole | read-only | mandatory | Drive Box Access Path Current Role. This shows the current role of drive box acess path. The following values are valid: Other (1) Indicates that the instrumen… |
| 1.3.6.1.4.1.232.8.2.3.1.6 | ColumncpqSsDrvBoxPathHostConnector | read-only | mandatory | Drive Box Access Path Host Connector. This is the host connector to which the access path is ultimately attached. If the host connector cannot be determined, t… |
| 1.3.6.1.4.1.232.8.2.3.1.7 | ColumncpqSsDrvBoxPathBoxOnConnector | read-only | mandatory | Drive Box Access Path Box on Connector. The box on connector indicates to which box instance this access path belongs. |
| 1.3.6.1.4.1.232.8.2.3.1.8 | ColumncpqSsDrvBoxPathLocationString | read-only | mandatory | Drive Box Access Path Location String. This string describes drive box access path in relation to the controller to which it is attached. If the location strin… |
| 1.3.6.1.4.1.232.8.3 | NodecpqSsTrap | |||
| 1.3.6.1.4.1.232.8.3.1 | ScalarcpqSsTrapPkts | read-only | deprecated | The total number of trap packets issued by the enterprise since the instrument agent was loaded. |
| 1.3.6.1.4.1.232.8.3.2 | ScalarcpqSsTrapLogMaxSize | read-only | deprecated | The maximum number of entries that will currently be kept in the trap log. If the maximum size has been reached and a new trap occurs the oldest trap will be r… |
| 1.3.6.1.4.1.232.8.3.3 | TablecpqSsTrapLogTable | not-accessible | deprecated | An ordered list of trap log entries (conceptually a queue). The trap log entries will be kept in the order in which they were generated with the most recent tr… |
| 1.3.6.1.4.1.232.8.3.3.1 | RowcpqSsTrapLogEntry | not-accessible | deprecated | A description of a trap event. |
| 1.3.6.1.4.1.232.8.3.3.1.1 | ColumncpqSsTrapLogIndex | read-only | deprecated | The value of this object uniquely identifies this trapLogEntry at this time. The most recent trap will have an index of 1 and the oldest trap will have an inde… |
| 1.3.6.1.4.1.232.8.3.3.1.2 | ColumncpqSsTrapType | read-only | deprecated | The type of the trap event that this entry describes. This number refers to an entry in a list of traps enumerating the possible traps the agent may issue. |
| 1.3.6.1.4.1.232.8.3.3.1.3 | ColumncpqSsTrapTime | read-only | deprecated | The time of the trap event that this entry describes. The time is given in year (first octet), month, day of month, hour, minute, second (last octet) order. Ea… |
| 1.3.6.1.4.1.232.8.4 | NodecpqSsRaidSystem | |||
| 1.3.6.1.4.1.232.8.4.1 | TablecpqSsRaidSystemTable | not-accessible | mandatory | RAID Storage System Table. |
| 1.3.6.1.4.1.232.8.4.1.1 | RowcpqSsRaidSystemEntry | not-accessible | mandatory | RAID Storage System Entry. |
| 1.3.6.1.4.1.232.8.4.1.1.1 | ColumncpqSsRaidSystemIndex | read-only | mandatory | RAID Storage System Index. The RAID Storage System index indicates to which storage system instance this table entry belongs. |
| 1.3.6.1.4.1.232.8.4.1.1.2 | ColumncpqSsRaidSystemName | read-only | mandatory | RAID Storage System Name. This is a description of the RAID Storage System`s name. This can be used for identification purposes. |
| 1.3.6.1.4.1.232.8.4.1.1.3 | ColumncpqSsRaidSystemStatus | read-only | mandatory | RAID Storage System Status. This is the current status of the RAID Storage System. This value will be one of the following: other(1) Indicates that the agent d… |
| 1.3.6.1.4.1.232.8.4.1.1.4 | ColumncpqSsRaidSystemCondition | read-only | mandatory | RAID Storage System Condition. This is the overall condition of the storage system. The following values are defined: other(1) The agent does not recognize the… |
| 1.3.6.1.4.1.232.8.4.1.1.5 | ColumncpqSsRaidSystemCntlr1SerialNumber | read-only | mandatory | RAID Storage System Controller 1 Serial Number. This is the controller number 1`s serial number which is normally display on the front panel. This can be used … |
| 1.3.6.1.4.1.232.8.4.1.1.6 | ColumncpqSsRaidSystemCntlr2SerialNumber | read-only | mandatory | RAID Storage System Controller 2 Serial Number. This is the controller number 2`s serial number which is normally display on the front panel. This can be used … |
| 1.3.6.1.4.1.232.8001 | NodecpqSs2FanStatusChange | Storage System fan status change. The agent has detected a change in the Fan Status of a storage system. The variable cpqSsBoxFanStatus indicates the current f… | ||
| 1.3.6.1.4.1.232.8002 | NodecpqSsTempFailed | Storage System temperature failure. The agent has detected that a temperature status has been set to failed. The storage system will be shutdown. | ||
| 1.3.6.1.4.1.232.8003 | NodecpqSsTempDegraded | Storage System temperature degraded. The agent has detected a temperature status that has been set to degraded. The storage system`s temperature is outside of … | ||
| 1.3.6.1.4.1.232.8004 | NodecpqSsTempOk | Storage System temperature ok. The temperature status has been set to OK. The storage system`s temperature has returned to normal operating range. It may be re… | ||
| 1.3.6.1.4.1.232.8005 | NodecpqSsSidePanelInPlace | Storage System side panel is in place. The side panel status has been set to in place. The storage system`s side panel has returned to a properly installed sta… | ||
| 1.3.6.1.4.1.232.8006 | NodecpqSsSidePanelRemoved | Storage System side panel is removed. The side panel status has been set to removed. The storage system`s side panel is not in a properly installed state. This… | ||
| 1.3.6.1.4.1.232.8007 | NodecpqSsPwrSupplyDegraded | A storage system power supply status has been set to degraded. | ||
| 1.3.6.1.4.1.232.8008 | NodecpqSs3FanStatusChange | Storage System fan status change. The agent has detected a change in the Fan Status of a storage system. The variable cpqSsBoxFanStatus indicates the current f… | ||
| 1.3.6.1.4.1.232.8009 | NodecpqSs3TempFailed | Storage System temperature failure. The agent has detected that a temperature status has been set to failed. The storage system will be shutdown. User Action: … | ||
| 1.3.6.1.4.1.232.8010 | NodecpqSs3TempDegraded | Storage System temperature degraded. The agent has detected a temperature status that has been set to degraded. The storage system`s temperature is outside of … | ||
| 1.3.6.1.4.1.232.8011 | NodecpqSs3TempOk | Storage System temperature ok. The temperature status has been set to OK. The storage system`s temperature has returned to normal operating range. It may be re… | ||
| 1.3.6.1.4.1.232.8012 | NodecpqSs3SidePanelInPlace | Storage System side panel is in place. The side panel status has been set to in place. The storage system`s side panel has returned to a properly installed sta… | ||
| 1.3.6.1.4.1.232.8013 | NodecpqSs3SidePanelRemoved | Storage System side panel is removed. The side panel status has been set to removed. The storage system`s side panel is not in a properly installed state. This… | ||
| 1.3.6.1.4.1.232.8014 | NodecpqSs3PwrSupplyDegraded | A storage system power supply status has been set to degraded. | ||
| 1.3.6.1.4.1.232.8015 | NodecpqSs4PwrSupplyDegraded | A storage system power supply status has been set to degraded. User Action: Take action to restore power or replace any failed storage system power supply. | ||
| 1.3.6.1.4.1.232.8016 | NodecpqSsExFanStatusChange | Storage system fan status change. The agent has detected a change in the Fan Module Status of a storage system. The variable cpqSsFanModuleStatus indicates the… | ||
| 1.3.6.1.4.1.232.8017 | NodecpqSsExPowerSupplyStatusChange | Storage system power supply status change. The agent has detected a change in the power supply status of a storage system. The variable cpqSsPowerSupplyStatus … | ||
| 1.3.6.1.4.1.232.8018 | NodecpqSsExPowerSupplyUpsStatusChange | Storage system power supply UPS status change. The agent has detected a change status of a UPS attached to a storage system power supply. The variable cpqSsPow… | ||
| 1.3.6.1.4.1.232.8019 | NodecpqSsExTempSensorStatusChange | Storage system temperature sensor status change. The agent has detected a change in the status of a storage system temperature sensor. The variable cpqSsTempSe… | ||
| 1.3.6.1.4.1.232.8020 | NodecpqSsEx2FanStatusChange | Storage system fan status change. The agent has detected a change in the fan module status of a storage system. The variable cpqSsFanModuleStatus indicates the… | ||
| 1.3.6.1.4.1.232.8021 | NodecpqSsEx2PowerSupplyStatusChange | Storage system power supply status change. The agent has detected a change in the power supply status of a storage system. The variable cpqSsPowerSupplyStatus … | ||
| 1.3.6.1.4.1.232.8022 | NodecpqSsExBackplaneFanStatusChange | Storage system fan status change. The agent has detected a change in the fan status of a storage system. The variable cpqSsBackplaneFanStatus indicates the cur… | ||
| 1.3.6.1.4.1.232.8023 | NodecpqSsExBackplaneTempStatusChange | Storage system temperature status change. The agent has detected a change in the status of the temperature in a storage system. The variable cpqSsBackplaneTemp… | ||
| 1.3.6.1.4.1.232.8024 | NodecpqSsExBackplanePowerSupplyStatusChange | Storage system power supply status change. The agent has detected a change in the power supply status of a storage system. The variable cpqSsBackplaneFtpsStatu… | ||
| 1.3.6.1.4.1.232.8025 | NodecpqSsExRecoveryServerStatusChange | Storage system recovery server option status change. The agent has detected a change in the recovery server option status of a storage system. The variable cpq… | ||
| 1.3.6.1.4.1.232.8026 | NodecpqSs5FanStatusChange | Storage System fan status change. The agent has detected a change in the Fan Status of a storage system. The variable cpqSsBoxFanStatus indicates the current f… | ||
| 1.3.6.1.4.1.232.8027 | NodecpqSs5TempStatusChange | Storage System temperature status change. The agent has detected a change in the temperature status of a storage system. The variable cpqSsBoxTempStatus indica… | ||
| 1.3.6.1.4.1.232.8028 | NodecpqSs5PwrSupplyStatusChange | Storage system power supply status change. The agent has detected a change in the power supply status of a storage system. The variable cpqSsBoxFltTolPwrSupply… | ||
| 1.3.6.1.4.1.232.8029 | NodecpqSs6FanStatusChange | Storage System fan status change. The agent has detected a change in the Fan Status of a storage system. The variable cpqSsBoxFanStatus indicates the current f… | ||
| 1.3.6.1.4.1.232.8030 | NodecpqSs6TempStatusChange | Storage System temperature status change. The agent has detected a change in the temperature status of a storage system. The variable cpqSsBoxTempStatus indica… | ||
| 1.3.6.1.4.1.232.8031 | NodecpqSs6PwrSupplyStatusChange | Storage system power supply status change. The agent has detected a change in the power supply status of a storage system. The variable cpqSsBoxFltTolPwrSupply… | ||
| 1.3.6.1.4.1.232.8032 | NodecpqSsConnectionStatusChange | Storage system connection status change. The agent has detected a change in the connection status of a storage system. The variable cpqSSboxConnectionStatus in… | ||
| 1.3.6.1.4.1.232.8033 | NodecpqSsGSIStatusChange | Storage system Global Service Indicator Status Change. The agent has detected a change in the Global Service Indicator status of a storage system. The variable… |