CT-CMMPHYS-MIB
93 objects
No module-level DESCRIPTION found.
Imported Objects
| CT-HSIMPHYS-MIB | mBusBoardID |
| CTRON-MIB-NAMES | ctCMM |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress |
| RFC1213-MIB | DisplayString ifIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.18.1 | NodecmmModemInfo | |||
| 1.3.6.1.4.1.52.4.1.1.18.1.1 | TablecmmBoardTable | not-accessible | mandatory | A list of CMM boards present in this unit. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1 | RowcmmBoardEntry | not-accessible | mandatory | A CMM board present in this unit. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.1 | ColumncmmBoardType | read-only | mandatory | The value of this object uniquely defines the CMM board type - a vendor's authoritative identification for a module. By convention, this value is allocated wit… |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.2 | ColumncmmNumModules | read-only | mandatory | The value of this object is the number of CMM modules contained on this physical CMM circuit board. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.3 | ColumncmmModuleNumModems | read-only | mandatory | Number of modems per CMM module. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.4 | ColumncmmTFTPServer | read-write | mandatory | The value of this object is the IP address of the TFTP server where the object code for CMM modules resides. This object is persistent. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.5 | ColumncmmUpgradePath | read-write | mandatory | The value of this object is the path to the object code for CMM modules on the TFTP server. This object is persistent. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.6 | ColumncmmUpgradeFlag | read-write | mandatory | The value of this object is a flag that indicates whether or not to upgrade the software for the CMM modules on the board. This object is persistent. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.7 | ColumncmmCommitFlag | read-write | mandatory | The value of this object is a flag that indicates whether or not to commit the software for the CMM modules on the board. This object is persistent. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.8 | ColumncmmModemResetLimit | read-write | mandatory | The value of this object is the number of times that a modem can be reset within a given time span before it is declared to be faulty. If the value is 0 then t… |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.9 | ColumncmmModemResetTime | read-write | mandatory | The value of this object is the time span (in minutes) during which the given number of resets must occur before the modem is declared to be faulty. This objec… |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.10 | ColumncmmOutgoingInactivityTimeout | read-write | mandatory | The value of this object is the duration (in seconds) of a period of inactivity before an outgoing call is terminated. This object is persistent. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.11 | ColumncmmIncomingInactivityTimeout | read-write | mandatory | The value of this object is the duration (in seconds) of a period of inactivity before an incoming call is terminated. This object is persistent. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.12 | ColumncmmAsyncBaseOrigATCmdStr | read-only | mandatory | The value of this object is the default or base set of AT commands to be used when originating an async call. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.13 | ColumncmmAsyncBaseAnswerATCmdStr | read-only | mandatory | The value of this object is the default or base set of AT commands to be used when answering an async call. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.14 | ColumncmmAsyncOrigStrModifier | read-write | mandatory | The value of this object is a set of additional AT commands to be used when originating an async call. This object is persistent. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.15 | ColumncmmAsyncAnswerStrModifier | read-write | mandatory | The value of this object is a set of additional AT commands to be used when answering an async call. This object is persistent. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.16 | ColumncmmAsyncOperOrigATCmdStr | read-only | mandatory | The value of this object is the operative set of AT commands to be used when originating an async call. It includes the base string, the modifier string, and t… |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.17 | ColumncmmAsyncOperAnswerATCmdStr | read-only | mandatory | The value of this object is the operative set of AT commands to be used when answering an async call. It includes the base string, the modifier string, and the… |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.18 | ColumncmmHdlcBaseOrigATCmdStr | read-only | mandatory | The value of this object is the default or base set of AT commands to be used when originating an HDLC call. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.19 | ColumncmmHdlcBaseAnswerATCmdStr | read-only | mandatory | The value of this object is the default or base set of AT commands to be used when answering an HDLC call. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.20 | ColumncmmHdlcOrigStrModifier | read-write | mandatory | The value of this object is a set of additional AT commands to be used when originating an HDLC call. This object is persistent. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.21 | ColumncmmHdlcAnswerStrModifier | read-write | mandatory | The value of this object is a set of additional AT commands to be used when answering an HDLC call. This object is persistent. |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.22 | ColumncmmHdlcOperOrigATCmdStr | read-only | mandatory | The value of this object is the operative set of AT commands to be used when originating an HDLC call. It includes the base string, the modifier string, and th… |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.23 | ColumncmmHdlcOperAnswerATCmdStr | read-only | mandatory | The value of this object is the operative set of AT commands to be used when answering an HDLC call. It includes the base string, the modifier string, and the … |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.24 | ColumncmmBoardAdminStatus | read-write | mandatory | The value of this object is the administrative status of the CMM board. down(1) removed from service immediately leave-service(2) to be removed from service at… |
| 1.3.6.1.4.1.52.4.1.1.18.1.1.1.25 | ColumncmmBoardOperStatus | read-only | mandatory | The value of this object is the operational status of the CMM board. initializing(1) up or in the process of a software upgrade active(2) for accepting calls l… |
| 1.3.6.1.4.1.52.4.1.1.18.1.2 | TablecmmModuleTable | not-accessible | mandatory | A list of CMM modules present on each CMM board in this unit |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1 | RowcmmModuleEntry | not-accessible | mandatory | The value of this object is a CMM module that is present in this unit |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1.1 | ColumncmmModuleID | read-only | mandatory | The value of this object is an index that uniquely identifies the CMM module within the physical CMM board. |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1.2 | ColumncmmDpramSize | read-only | mandatory | Size of the DPRAM (in bytes) on the CMM module. |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1.3 | ColumncmmSdramSize | read-only | mandatory | Size of the SDRAM (in bytes) on the CMM module. |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1.4 | ColumncmmCpuType | read-only | mandatory | CPU type on the CMM module. |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1.5 | ColumncmmCpuSpeed | read-only | mandatory | The speed of the CPU (in Megahertz) on the CMM module. |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1.6 | ColumncmmCpuFwRev | read-only | mandatory | Revision of the CPU firmware on the CMM module. This code is a product of RSA. |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1.7 | ColumncmmEpldId | read-only | mandatory | EPLD ID on the CMM module. (Read from the Altera chip.) |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1.8 | ColumncmmEpldRev | read-only | mandatory | Revision of the EPLD firmware on the CMM module. This code is produced by Cabletron. |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1.9 | ColumncmmNumBadModems | read-only | mandatory | The value of this object is the number of bad modems on the CMM module. |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1.10 | ColumncmmModuleAdminStatus | read-write | mandatory | The value of this object is the administrative status of the CMM module. down(1) removed from service immediately leave-service(2) to be removed from service a… |
| 1.3.6.1.4.1.52.4.1.1.18.1.2.1.11 | ColumncmmModuleOperStatus | read-only | mandatory | The value of this object is the operational status of the CMM module. initializing(1) a software upgrade active(2) for accepting calls leaving-service(3) funct… |
| 1.3.6.1.4.1.52.4.1.1.18.1.3 | TablecmmModemTable | not-accessible | mandatory | A list of modems present on each CMM module on each CMM board in this unit |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1 | RowcmmModemEntry | not-accessible | mandatory | This object contains data for a single CMM modem. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.1 | ColumncmmBoardID | read-only | mandatory | This object contains the logical number of the CMM board to which the modem belongs. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.2 | ColumncmmModemID | read-only | mandatory | This object contains the logical number of the modem on the CMM module to which the modem belongs. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.3 | ColumncmmIFNum | read-only | mandatory | This object contains the number of the instance of the Interface MIB that is associated with this modem. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.4 | ColumncmmSessionNum | read-only | mandatory | This object contains the session number that is associated with this modem. Session numbers are assigned, starting with 1, from the first modem on the first mo… |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.5 | ColumncmmDdpPartNum | read-only | mandatory | Part number of the DDP controller on the CMM module. (Read from the DDP chip.) |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.6 | ColumncmmDdpRevLevel | read-only | mandatory | Revision level of the DDP controller on the CMM module. (Read from the DDP chip.) |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.7 | ColumncmmDdpFwRev | read-only | mandatory | Revison of the DDP controller firmware on the CMM module. This code is produced by Rockwell. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.8 | ColumncmmDDPInterrupts | read-only | mandatory | This object contains the number of interrupts received by the CMM transfer manager since initialization. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.9 | ColumncmmRxFlowCtlEvts | read-write | mandatory | This object contains the number of received flow control events. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.10 | ColumncmmTxFlowCtlEvts | read-write | mandatory | This object contains the number of transmitted flow control events. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.11 | ColumncmmCallStatus | read-write | mandatory | This object contains the current call status. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.12 | ColumncmmCallOrigin | read-only | mandatory | This object contains an enumerated value that indicates whether the call originated locally or remotely. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.13 | ColumncmmRobbedBitDetected | read-only | mandatory | This object contains the robbed bit signalling pattern that was detected by the modem or 0 if none. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.14 | ColumncmmCorrectionType | read-only | mandatory | This object contains an enumerated value that indicates the type of error correction that was negotiated. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.15 | ColumncmmCompressionType | read-only | mandatory | This object contains an enumerated value that indicates the type of data compression that was negotiated. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.16 | ColumncmmRxRate | read-only | mandatory | This object contains the current receive rate. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.17 | ColumncmmTxRate | read-only | mandatory | This object contains the current transmit rate. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.18 | ColumncmmEncoding | read-only | mandatory | This object contains the current PCM encoding type. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.19 | ColumncmmFraming | read-only | mandatory | This object contains the current framing type. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.20 | ColumncmmInitialConnectRate | read-only | mandatory | This object contains the initial connect rate (in BPS) or the session. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.21 | ColumncmmMaxHostWindows | read-only | mandatory | This object contains the maximum number of host windows. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.22 | ColumncmmMaxCmmWindows | read-only | mandatory | This object contains the maximum number of CMM windows. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.23 | ColumncmmNumOutHostAcks | read-only | mandatory | This object contains the number of host window acks that have not been processed by the CMM side. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.24 | ColumncmmNumOutCmmAcks | read-only | mandatory | This object contains the number of CMM window acks that have not been processed by the host side. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.25 | ColumncmmToNetworkOctets | read-only | mandatory | This object contains the number of data bytes transmitted (modem -> central office switch). |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.26 | ColumncmmFromNetworkOctets | read-only | mandatory | This object contains the number of data bytes received (central office switch -> modem). |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.27 | ColumncmmToHostOctets | read-only | mandatory | This object contains the number of data bytes transmitted (modem -> m-bus host). |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.28 | ColumncmmFromHostOctets | read-only | mandatory | This object contains the number of data bytes received (m-bus host -> modem). |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.29 | ColumncmmToNetworkFrames | read-only | mandatory | This object contains the number of frames transmitted (modem -> central office switch). |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.30 | ColumncmmFromNetworkFrames | read-only | mandatory | This object contains the number of frames received (central office switch -> modem). |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.31 | ColumncmmOversizeFrames | read-only | mandatory | This object contains the number of HDLC frames received that were greater than the maximum permissible size. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.32 | ColumncmmOverrunErrors | read-only | mandatory | This object contains the number of HDLC overrun errors. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.33 | ColumncmmCRCErrors | read-only | mandatory | This object contains the number of HDLC CRC errors. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.34 | ColumncmmAbortedFrames | read-only | mandatory | This object contains the number of HDLC frames that were aborted while they were being received. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.35 | ColumncmmRetrainEvents | read-only | mandatory | This object contains the number of times that retrain and renegotiation events have occurred since initialization. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.36 | ColumncmmARAEvents | read-only | mandatory | This object contains the number of times that automatic rate adaption events have occurred. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.37 | ColumncmmARAFlag | read-only | mandatory | This object contains a flag that indicates whether or not an ARA event has occurred during the current session. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.38 | ColumncmmCarrierLossEvents | read-only | mandatory | This object contains the number of times that carrier loss events have occurred. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.39 | ColumncmmCarrierLossFlag | read-only | mandatory | This object contains a flag that indicates whether or not a carrier loss event has occurred during the current session. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.40 | ColumncmmRcvSignalLevel | read-only | mandatory | This object contains the receive signal level. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.41 | ColumncmmRcvSignalEQM | read-only | mandatory | This object contains the receive signal EQM. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.42 | ColumncmmTDMSlot | read-only | mandatory | This object contains the number of the TDM slot used by this session. |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.43 | ColumncmmResetModemStats | read-write | mandatory | This object is used to reset the statistics pertaining to the selected modem. If written with the value 'true', the statistics will be reset. If written with t… |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.44 | ColumncmmModemAdminStatus | read-write | mandatory | This object contains the administrative status of a modem. down(1) leave-service(2) the completion of its current call, if any up(3) run-diagnostics(4) compreh… |
| 1.3.6.1.4.1.52.4.1.1.18.1.3.1.45 | ColumncmmModemOperStatus | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.1.1.18.1.5 | NodecmmFreeFormAtCmdGroup | |||
| 1.3.6.1.4.1.52.4.1.1.18.1.5.1 | ScalarcmmATCommand | read-write | mandatory | This object contains the user-defined AT command string. It can contain up to 256 characters, including a carriage return that will automatically be inserted a… |
| 1.3.6.1.4.1.52.4.1.1.18.1.5.2 | ScalarcmmSelectedModem | read-write | mandatory | This object contains the ID of the modem to which the free-form AT command string should be sent. |
| 1.3.6.1.4.1.52.4.1.1.18.1.5.3 | ScalarcmmATCmdStatus | read-write | mandatory | This object allows the free-form AT command string to be sent and allows the status of the command string to be examined. |
| 1.3.6.1.4.1.52.4.1.1.18.1.5.4 | ScalarcmmATCmdResult | read-only | mandatory | This object contains the result string from issuing the free-form AT command . |