CT-DAWANCONN-MIB
23 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-OIDS | cabletron |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Gauge |
| SNMPv2-TC | TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4497 | NodectSSA | |||
| 1.3.6.1.4.1.52.4497.17 | NodedaWanConnection | |||
| 1.3.6.1.4.1.52.4497.17.1 | ScalardaWanNumConnections | read-only | mandatory | This is the total number of connection objects currently in the system. |
| 1.3.6.1.4.1.52.4497.17.2 | TabledaWanConnectionTable | not-accessible | mandatory | A list of Demand Access remote WAN connections |
| 1.3.6.1.4.1.52.4497.17.2.1 | RowdaWanConnectionEntry | not-accessible | mandatory | An entry containing wan connection information and statistics. |
| 1.3.6.1.4.1.52.4497.17.2.1.1 | ColumndaWanConnectionIndex | read-only | mandatory | This is the index into this table. This index uniquely identifies the Connection. |
| 1.3.6.1.4.1.52.4497.17.2.1.2 | ColumndaWanConnectionIfIndex | read-only | mandatory | This is the ifIndex value of the wan connection group. If the ifIndex value is unknown, the value of this object will be zero. |
| 1.3.6.1.4.1.52.4497.17.2.1.3 | ColumndaWanConnectionState | read-only | mandatory | This is the state of the Connection. |
| 1.3.6.1.4.1.52.4497.17.2.1.4 | ColumndaWanConnectionConnectControl | read-write | mandatory | This object controls the desired state of the wan Connection. Setting this object to connect(1) will initiate the set of actions to bring the wan Connection to… |
| 1.3.6.1.4.1.52.4497.17.2.1.5 | ColumndaWanConnectionConnectType | read-only | mandatory | This specifies the type of the wan connection. |
| 1.3.6.1.4.1.52.4497.17.2.1.6 | ColumndaWanConnectionDeviceIndex | read-only | mandatory | This is the index of the device that is associated with this connection. This value will be zero if there is no device associated with this device. |
| 1.3.6.1.4.1.52.4497.17.2.1.7 | ColumndaWanConnectionConnectSpeed | read-only | mandatory | The information transfer speed in bits/second when calling this peer. The detailed media specific information, e.g. information type and information transfer r… |
| 1.3.6.1.4.1.52.4497.17.2.1.8 | ColumndaWanConnectionLocalAddress | read-only | mandatory | Call Address at which the connection will originate from. Think of this as the set of characters following 'ATDT ' or the 'phone number' included in a D channe… |
| 1.3.6.1.4.1.52.4497.17.2.1.9 | ColumndaWanConnectionPeerAddress | read-only | mandatory | Calling Party Number information element, as for example passed in an ISDN SETUP message by a PBX or switch, for incoming calls. This address can be used to id… |
| 1.3.6.1.4.1.52.4497.17.2.1.10 | ColumndaWanConnectionSubAddress | read-only | mandatory | Subaddress at which the connection will originate from. If the subaddress is undefined for the given media or unused, then the value is zero. |
| 1.3.6.1.4.1.52.4497.17.2.1.11 | ColumndaWanConnectionInfoType | read-only | mandatory | The Information Transfer Capability to be used for this connection. speech(2) refers to a non-data connection, whereas audio31(6) and audio7(7) refer to data m… |
| 1.3.6.1.4.1.52.4497.17.2.1.12 | ColumndaWanConnectionChargedUnits | read-only | mandatory | The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be … |
| 1.3.6.1.4.1.52.4497.17.2.1.13 | ColumndaWanConnectionConnectTime | read-only | mandatory | The value of sysUpTime when this connection was completed. This object will be updated whenever a call is completed. |
| 1.3.6.1.4.1.52.4497.17.2.1.14 | ColumndaWanConnectionConnectDirection | read-only | mandatory | The direction from which this connect occurred. |
| 1.3.6.1.4.1.52.4497.17.2.1.15 | ColumndaWanConnectionDisconnectTime | read-only | mandatory | The value of sysUpTime when this call was disconnected. This object will be updated whenever a call is disconnected. |
| 1.3.6.1.4.1.52.4497.17.2.1.16 | ColumndaWanConnectionDisconnectDirection | read-only | mandatory | The direction from which this disconnect occurred. |
| 1.3.6.1.4.1.52.4497.17.2.1.17 | ColumndaWanConnectionDisconnectCause | read-only | mandatory | The encoded network cause value associated with this call. This object will be updated whenever a call is started or cleared. The value of this object will dep… |
| 1.3.6.1.4.1.52.4497.17.2.1.18 | ColumndaWanConnectionDisconnectText | read-only | mandatory | ASCII text describing the reason for this call termination. This object exists because it would be impossible for a management station to store all possible ca… |