CT-ELS10-27-MIB
325 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.1.2.2 | Nodeels10-27WriteStatusTrap | Sent when a bank of Flash EPROM has been erased. If els10-27swdisWriteStatus indicates success, then the unit is ready to be downloaded with the new software. | ||
| 1.3.6.1.2.1.1.2.3 | Nodeels10-27PortFunctionsTrap | Sent whenever the current functional state (active protocols) of the port has changed. | ||
| 1.3.6.1.2.1.1.2.4 | Nodeels10-27RxQueuesTrap | Sent whenever the number of times that the port's receiver has stopped receiving packets due to buffer space shortages has exceeded the port's limit. | ||
| 1.3.6.1.2.1.1.2.5 | Nodeels10-27RxStormFlagTrap | Sent whenever broadcast/multicast storm protection has been invoked for the port. | ||
| 1.3.6.1.2.1.1.2.6 | Nodeels10-27TxCongestsTrap | Sent whenever packets destined for the unit itself were discarded due to lack of buffer space. | ||
| 1.3.6.1.2.1.1.2.8 | Nodeels10-27DebugStringIdTrap | Sent whenever the unit has a debug text string to be displayed. The text strings are sent in a stream-like fashion. | ||
| 1.3.6.1.2.1.1.2.9 | Nodeels10-27LpbkOperationTrap | Send whenever the unit has finished a loop back test, or a loop back error has been detected. | ||
| 1.3.6.1.2.1.1.2.10 | Nodeels10-27TrunkStateTrap | A trunking state change transition has occurred. The possible transitions are: CLOSED-ONEWAY ONEWAY-PERTURBED PERTURBED-JOINED JOINED-HELDDOWN CLOSED-HELDDOWN … | ||
| 1.3.6.1.2.1.1.2.11 | Nodeels10-27TrunkBridgeAddrTrap | The associated trunking MAC address of the bridge ID of the remote bridge has changed. | ||
| 1.3.6.1.2.1.1.2.12 | Nodeels10-27TrunkIPAddrTrap | The associated trunking IP address of the remote bridge has changed. | ||
| 1.3.6.1.2.1.1.2.13 | Nodeels10-27TrunkErrorTrap | An error has occurred in trunking. | ||
| 1.3.6.1.2.1.1.2.14 | Nodeels10-27TrunkLinkOrdinalTrap | The port's index in the trunking group has changed. | ||
| 1.3.6.1.2.1.1.2.15 | Nodeels10-27TrunkLinkCountTrap | The number of ports in the trunking group has changed. | ||
| 1.3.6.1.2.1.1.2.16 | Nodeels10-27DiagUnitBootedTrap | The unit has booted. els10-27adminFatalErr contains information about why the unit rebooted. | ||
| 1.3.6.1.2.1.1.2.17 | Nodeels10-27StorageFailureTrap | Sent if the unit's Configuration EEPROM has failed. The unit will not be able to reboot, and must be returned to the factory. | ||
| 1.3.6.1.2.1.1.2.18 | Nodeels10-27PortCongestedTrap | Sent whenever outbound congestion control has been invoked for the port. | ||
| 1.3.6.1.2.1.1.2.19 | Nodeels10-27TopChangeBegunTrap | The spanning tree topology has begun to change. | ||
| 1.3.6.1.2.1.1.2.20 | Nodeels10-27TopChangeEndTrap | The spanning tree topology has stopped changing. | ||
| 1.3.6.1.2.1.1.2.21 | Nodeels10-27IfErrorsTrap | Sent whenever the number of hardware errors in received and transmitted packets has exceeded the port's limit. | ||
| 1.3.6.1.2.1.1.2.22 | Nodeels10-27StRootIDTrap | The spanning tree root bridge ID for the unit has changed. | ||
| 1.3.6.1.2.1.1.2.23 | Nodeels10-27StRootCostTrap | The unit's spanning tree cost to the root bridge has changed. | ||
| 1.3.6.1.2.1.1.2.24 | Nodeels10-27StRootPortTrap | The unit's spanning tree root port has changed. | ||
| 1.3.6.1.2.1.1.2.25 | Nodeels10-27StMaxAgeTrap | The unit's spanning tree maximum age has changed. | ||
| 1.3.6.1.2.1.1.2.26 | Nodeels10-27StHelloTimeTrap | The unit's spanning tree hello time has changed. | ||
| 1.3.6.1.2.1.1.2.27 | Nodeels10-27StForwardDelayTrap | The unit's spanning tree forward delay time has changed. | ||
| 1.3.6.1.2.1.1.2.28 | Nodeels10-27StDesigRootTrap | The Root Bridge ID in received Spanning Tree Configuration BPDUs from the port has changed. | ||
| 1.3.6.1.2.1.1.2.29 | Nodeels10-27StPortDesigBridgeTrap | The bridge ID of the spanning tree designated bridge of the LAN/WAN to which the port is attached has changed. | ||
| 1.3.6.1.2.1.1.2.30 | Nodeels10-27StPortDesigCostTrap | The cost to the spanning tree root bridge from the designated port of the LAN/WAN to which the port is attached has changed. | ||
| 1.3.6.1.2.1.1.2.31 | Nodeels10-27StPortDesigPortTrap | The port ID of the spanning tree designated port of the LAN/WAN to which the port is attached has changed. | ||
| 1.3.6.1.2.1.1.2.32 | Nodeels10-27StPortStateTrap | The spanning tree state of the port has changed. | ||
| 1.3.6.1.2.1.1.2.34 | Nodeels10-27InvalidConfigurationFileTrap | Diagnostics has detected corrupted configuration data. Default parameter values have been restored. | ||
| 1.3.6.1.2.1.1.2.35 | Nodeels10-27StInvalidFlashCodeImageTrap | An invalid code image was detected in flash memory. An attempt will be made to obtain a valid image. | ||
| 1.3.6.1.2.1.1.2.100 | Nodeels10-27hwDiagTrap | Sent whenever the unit's diagnostics have indicated an error. | ||
| 1.3.6.1.4.1.97 | Nodesigma | |||
| 1.3.6.1.4.1.97.1 | Nodesys | |||
| 1.3.6.1.4.1.97.1.1 | ScalarsysID | read-only | mandatory | |
| 1.3.6.1.4.1.97.1.2 | ScalarsysReset | read-write | mandatory | |
| 1.3.6.1.4.1.97.1.6 | ScalarsysTrapPort | read-write | mandatory | |
| 1.3.6.1.4.1.97.9 | Nodeels10-27 | |||
| 1.3.6.1.4.1.97.9.1 | Nodeels10-27hw | |||
| 1.3.6.1.4.1.97.9.1.1 | Scalarels10-27hwDiagCode | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.1.2 | Scalarels10-27hwManufData | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.1.3 | Scalarels10-27hwPortCount | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.1.4 | Tableels10-27hwPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.1.4.1 | Rowels10-27hwPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.1.4.1.1 | Columnels10-27hwPortIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.1.4.1.2 | Columnels10-27hwPortType | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.1.4.1.3 | Columnels10-27hwPortSubType | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.1.4.1.4 | Columnels10-27hwPortDiagPassed | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.1.4.1.5 | Columnels10-27hwAddr | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.1.5 | Scalarels10-27hwUpLink | read-only | mandatory | Specifies whether the Up-Link I/O module is existed |
| 1.3.6.1.4.1.97.9.1.6 | Scalarels10-27hwUpLinkManufData | read-only | mandatory | This is a 32-byte array which contains the part number, serial number, and hardware revision level of the Up-Link I/O module. This array is valid only when the… |
| 1.3.6.1.4.1.97.9.2 | Nodeels10-27sw | |||
| 1.3.6.1.4.1.97.9.2.1 | Scalarels10-27swNumber | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.2.2 | Tableels10-27swFilesetTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.2.2.1 | Rowels10-27swFilesetEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.2.2.1.1 | Columnels10-27swIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.2.2.1.2 | Columnels10-27swDesc | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.2.2.1.3 | Columnels10-27swCount | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.2.2.1.4 | Columnels10-27swType | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.2.2.1.5 | Columnels10-27swSizes | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.2.2.1.6 | Columnels10-27swStarts | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.2.2.1.7 | Columnels10-27swBases | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.2.2.1.8 | Columnels10-27swFlashBank | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.3 | Nodeels10-27admin | |||
| 1.3.6.1.4.1.97.9.3.1 | Scalarels10-27adminFatalErr | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.3.2 | Scalarels10-27adminAnyPass | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.3.3 | Scalarels10-27adminGetPass | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.3.4 | Scalarels10-27adminNMSIPAddr | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.3.7 | Scalarels10-27adminStorageFailure | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.3.8 | Scalarels10-27adminAuthenticationFailure | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.3.10 | Scalarels10-27adminNAMReceiveCongests | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.3.11 | Scalarels10-27adminArpEntries | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.3.12 | Scalarels10-27adminArpStatics | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.3.13 | Scalarels10-27adminArpOverflows | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.3.14 | Scalarels10-27adminIpEntries | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.3.15 | Scalarels10-27adminIpStatics | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.3.16 | Scalarels10-27adminStaticPreference | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.3.17 | Scalarels10-27adminRipPreference | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.3.18 | Scalarels10-27adminRipRouteDiscards | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.3.19 | Scalarels10-27adminRebootConfig | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.3.21 | Scalarels10-27adminDisableButton | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.3.22 | Scalarels10-27adminButtonSelection | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.3.23 | Scalarels10-27adminLEDProgramOption | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.4 | Nodeels10-27swdis | |||
| 1.3.6.1.4.1.97.9.4.1 | Scalarels10-27swdisDesc | read-only | mandatory | The description (0-32 bytes) of the software set currently being downloaded, or a description of the software set last downloaded since the els10-27 booted. |
| 1.3.6.1.4.1.97.9.4.2 | Scalarels10-27swdisAccess | read-write | mandatory | The version of software that may be downloaded. Attempts to download other versions of software will be rejected. The value for swdisAccess is embedded within … |
| 1.3.6.1.4.1.97.9.4.3 | Scalarels10-27swdisWriteStatus | read-only | mandatory | The status of the erase/write operation. |
| 1.3.6.1.4.1.97.9.4.4 | Scalarels10-27swdisConfigIp | read-write | mandatory | The IP address of the NMS (i.e., any IP host) that is allowed to use TFTP to send/retrieve the configuration file of the els10-27. A value of 0.0.0.0 (which is… |
| 1.3.6.1.4.1.97.9.4.5 | Scalarels10-27swdisConfigRetryTime | read-write | mandatory | The number of seconds that the els10-27 will wait for an acknowledgment before it retransmits an unacknowledged TFTP data block. The factory specified default … |
| 1.3.6.1.4.1.97.9.4.6 | Scalarels10-27swdisConfigTotalTimeout | read-write | mandatory | The number of seconds that the els10-27 will wait for an acknowledgment to a data block before it cancels a TFTP session. The factory specified default is 25 s… |
| 1.3.6.1.4.1.97.9.5 | Nodeels10-27addr | |||
| 1.3.6.1.4.1.97.9.5.1 | Scalarels10-27addrStatics | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.5.2 | Scalarels10-27addrDynamics | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.5.3 | Scalarels10-27addrDynamicMax | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.5.4 | Scalarels10-27addrDynamicOverflows | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.5.5 | Scalarels10-27addrFlags | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.5.6 | Scalarels10-27addrMAC | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.5.7 | Scalarels10-27addrPort | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.5.8 | Scalarels10-27addrOperation | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.5.9 | Scalarels10-27addrIndex | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.5.10 | Scalarels10-27addrNext | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.5.19 | Scalarels10-27addrBlockSize | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.5.20 | Scalarels10-27addrBlock | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.6 | Nodeels10-27if | |||
| 1.3.6.1.4.1.97.9.6.1 | Tableels10-27ifTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1 | Rowels10-27ifEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.1 | Columnels10-27ifIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.4 | Columnels10-27ifThreshold | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.5 | Columnels10-27ifThresholdTime | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.6 | Columnels10-27ifRxQueueThresh | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.7 | Columnels10-27ifRxQueueThreshTime | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.8 | Columnels10-27ifTxStormCnt | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.9 | Columnels10-27ifTxStormTime | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.16 | Columnels10-27ifFunction | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.18 | Columnels10-27ifRxHwFCSs | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.19 | Columnels10-27ifRxQueues | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.27 | Columnels10-27ifStatisticsTime | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.28 | Columnels10-27ifForwardedChars | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.29 | Columnels10-27ifDescr | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.30 | Columnels10-27ifGoodRxFrames | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.6.1.1.31 | Columnels10-27ifGoodTxFrames | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.7 | Nodeels10-27dot3 | |||
| 1.3.6.1.4.1.97.9.7.1 | Tableels10-27dot3Table | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1 | Rowels10-27dot3Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1.1 | Columnels10-27dot3Index | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1.2 | Columnels10-27dot3TPLinkOK | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1.3 | Columnels10-27dot3LedOn | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1.4 | Columnels10-27dot3RxCollisions | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1.5 | Columnels10-27dot3RxRunts | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1.6 | Columnels10-27dot3RxLateColls | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1.7 | Columnels10-27dot3TxJabbers | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1.8 | Columnels10-27dot3TxBabbles | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1.9 | Columnels10-27dot3TxCollisions | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1.13 | Columnels10-27dot3SpeedSelection | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.7.1.1.14 | Columnels10-27dot3DuplexSelection | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.8 | Nodeels10-27uart | |||
| 1.3.6.1.4.1.97.9.8.1 | Tableels10-27uartTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.8.1.1 | Rowels10-27uartEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.8.1.1.1 | Columnels10-27uartIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.8.1.1.2 | Columnels10-27uartBaud | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.8.1.1.3 | Columnels10-27uartAlignmentErrors | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.8.1.1.4 | Columnels10-27uartOverrunErrors | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.10 | Nodeels10-27debug | |||
| 1.3.6.1.4.1.97.9.10.1 | Scalarels10-27debugStringID | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.10.2 | Scalarels10-27debugString | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.10.3 | Tableels10-27debugTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.10.3.1 | Rowels10-27debugEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.10.3.1.1 | Columnels10-27debugIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.10.3.1.2 | Columnels10-27debugOperation | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.10.3.1.3 | Columnels10-27debugBase | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.10.3.1.4 | Columnels10-27debugLength | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.10.3.1.5 | Columnels10-27debugData | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.11 | Nodeels10-27lpbk | |||
| 1.3.6.1.4.1.97.9.11.1 | Tableels10-27lpbkTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1 | Rowels10-27lpbkEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.1 | Columnels10-27lpbkIndex | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.2 | Columnels10-27lpbkOperation | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.3 | Columnels10-27lpbkDestAddr | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.4 | Columnels10-27lpbkPktNum | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.5 | Columnels10-27lpbkInterval | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.6 | Columnels10-27lpbkPktLength | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.7 | Columnels10-27lpbkIncrements | read-write | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.8 | Columnels10-27lpbkGoods | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.9 | Columnels10-27lpbkErrorNoReceives | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.10 | Columnels10-27lpbkErrorBadReceives | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.11 | Columnels10-27lpbkErrorSize | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.12 | Columnels10-27lpbkErrorSent | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.13 | Columnels10-27lpbkErrorReceived | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.11.1.1.14 | Columnels10-27lpbkErrorOffset | read-only | mandatory | |
| 1.3.6.1.4.1.97.9.12 | Nodeels10-27proto | |||
| 1.3.6.1.4.1.97.9.12.1 | Tableels10-27protoTable | not-accessible | mandatory | This table contains configuration information specify- ing the types of protocols used to bridge, route, translate, and filter frames for each port. |
| 1.3.6.1.4.1.97.9.12.1.1 | Rowels10-27protoEntry | not-accessible | mandatory | Each entry in this table specifies which protocols are used by a particular port in the ES/1. |
| 1.3.6.1.4.1.97.9.12.1.1.1 | Columnels10-27protoIfIndex | read-only | mandatory | Identifies the interface (port) to which this entry's information belongs. The value of this variable corresponds to ifIndex, as well as most of the other port… |
| 1.3.6.1.4.1.97.9.12.1.1.2 | Columnels10-27protoBridge | read-write | mandatory | Defines the bridging method to be applied to frames received at, or destined for, this port. Ethernet and FDDI ports may be configured for transparent, srt, or… |
| 1.3.6.1.4.1.97.9.12.1.1.3 | Columnels10-27protoSuppressBpdu | read-write | mandatory | Allows transmission of spanning tree protocol packets to be suppressed. If normal(1), 802.1d spanning tree packets are transmitted as usual. If suppressed(2), … |
| 1.3.6.1.4.1.97.9.12.1.1.4 | Columnels10-27protoRipListen | read-write | mandatory | Specifies whether the port should listen for internet Routing Information Protocol (RFC-1058) packets, in order to build the routing table for the unit. |
| 1.3.6.1.4.1.97.9.12.1.1.5 | Columnels10-27protoTrunking | read-write | mandatory | Specifies whether SMC's trunking protocol (an extension to the standard Spanning Tree) is to be used over this port. |
| 1.3.6.1.4.1.97.9.12.1.1.6 | Columnels10-27sprotoTransmitPacing | read-write | mandatory | When enabled, introduces delays into normal transmission of frames, to reduce the probability of collisions during heavy traffic. |
| 1.3.6.1.4.1.97.9.13 | Nodeels10-27trunk | |||
| 1.3.6.1.4.1.97.9.13.1 | Tableels10-27trunkTable | not-accessible | mandatory | This table describes the trunking status and attributes of the interfaces that are configured for bridge trunking. |
| 1.3.6.1.4.1.97.9.13.1.1 | Rowels10-27trunkEntry | not-accessible | mandatory | An entry exists in this table for each physical interface (port) that is configured for trunking. |
| 1.3.6.1.4.1.97.9.13.1.1.1 | Columnels10-27trunkIfIndex | read-only | mandatory | Identifies a physical interface (port) which is configured for LAN trunking. The value of this variable corresponds to ifIndex, as well as most of the other po… |
| 1.3.6.1.4.1.97.9.13.1.1.2 | Columnels10-27trunkState | read-only | mandatory | If off(1) then this link has not been enabled for trunking. If closed(2) then this link has not yet received any Trunking PDUs. If oneway(3) then incoming Trun… |
| 1.3.6.1.4.1.97.9.13.1.1.3 | Columnels10-27trunkRemoteBridgeAddr | read-only | mandatory | The MAC address portion of the bridge ID of the remote bridge. |
| 1.3.6.1.4.1.97.9.13.1.1.4 | Columnels10-27trunkRemoteIp | read-only | mandatory | The IP address of the remote bridge, as reported by that bridge for administrative purposes. |
| 1.3.6.1.4.1.97.9.13.1.1.5 | Columnels10-27trunkLastError | read-only | mandatory | The last reason for failure when the link is in closed, oneway, or helddown state. |
| 1.3.6.1.4.1.97.9.13.1.1.6 | Columnels10-27trunkLinkOrdinal | read-only | mandatory | The position of this link within the trunk group. |
| 1.3.6.1.4.1.97.9.13.1.1.7 | Columnels10-27trunkLinkCount | read-only | mandatory | The number of links within the trunk group. |
| 1.3.6.1.4.1.97.9.13.1.1.8 | Columnels10-27trunkLastChange | read-only | mandatory | The number of seconds since els10-27trunkState changed. |
| 1.3.6.1.4.1.97.9.14 | Nodeels10-27workgroup | |||
| 1.3.6.1.4.1.97.9.14.1 | Scalarels10-27WorkGroupNextNumber | read-only | mandatory | The next available workgroup number to be used. When creating a new workgroup, it is recommended to read the value of the variable and use it to key into the w… |
| 1.3.6.1.4.1.97.9.14.2 | Scalarels10-27WorkGroupCurrentCount | read-only | mandatory | The total number of workgroups currently defined. |
| 1.3.6.1.4.1.97.9.14.3 | Scalarels10-27WorkGroupMaxCount | read-only | mandatory | The maximum number of workgroups allowed. |
| 1.3.6.1.4.1.97.9.14.4 | Tableels10-27WorkGroupTable | not-accessible | mandatory | This table contains work group definitions for the interfaces. |
| 1.3.6.1.4.1.97.9.14.4.1 | Rowels10-27WorkGroupEntry | not-accessible | mandatory | Each entry in this table contains a definition of a work group. |
| 1.3.6.1.4.1.97.9.14.4.1.1 | Columnels10-27WorkGroupNumber | read-write | mandatory | An integer that identifies the work group, used as an index to this table. |
| 1.3.6.1.4.1.97.9.14.4.1.2 | Columnels10-27WorkGroupName | read-write | mandatory | A 1-16 character work group name. |
| 1.3.6.1.4.1.97.9.14.4.1.3 | Columnels10-27WorkGroupPorts | read-write | mandatory | A list of all ports within the group. The first octet specified ports 1-8, the second 9-16, etc. |
| 1.3.6.1.4.1.97.9.14.4.1.4 | Columnels10-27WorkGroupType | read-write | mandatory | The type of work group: all - no additional information needs to be supplied. |
| 1.3.6.1.4.1.97.9.15 | Nodeels10-27trapMgt | |||
| 1.3.6.1.4.1.97.9.15.1 | Tableels10-27trapControlTable | not-accessible | mandatory | This table contains information about the severity of each trap and whether the trap is currently enabled. |
| 1.3.6.1.4.1.97.9.15.1.1 | Rowels10-27trapControlEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.15.1.1.1 | Columnels10-27trapIndex | read-only | mandatory | The specific trap number. |
| 1.3.6.1.4.1.97.9.15.1.1.2 | Columnels10-27trapEnabled | read-write | mandatory | Enable or disable the generation of this trap. |
| 1.3.6.1.4.1.97.9.15.1.1.3 | Columnels10-27trapSeverity | read-write | mandatory | A user-definable severity, indicating the importance of the trap. |
| 1.3.6.1.4.1.97.9.15.1.1.4 | Columnels10-27trapText | read-only | mandatory | A description of the trap. |
| 1.3.6.1.4.1.97.9.15.2 | Tableels10-27trapSeverityControlTable | not-accessible | mandatory | This table contains information about whether a class of traps of a particular severity are enabled or disabled. |
| 1.3.6.1.4.1.97.9.15.2.1 | Rowels10-27trapSeverityControlEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.15.2.1.1 | Columnels10-27trapSeverityControlSeverity | read-write | mandatory | A user-definable severity, indicating the importance of the trap. |
| 1.3.6.1.4.1.97.9.15.2.1.2 | Columnels10-27trapSeverityEnable | read-write | mandatory | Enable or disable all traps of a given severity level. |
| 1.3.6.1.4.1.97.9.15.3 | Scalarels10-27trapIncludeText | read-write | mandatory | Whether or not a formatted text string is included in the trap PDU. |
| 1.3.6.1.4.1.97.9.15.4 | Scalarels10-27trapTime | read-write | mandatory | The time, in centiseconds, which should expire between the sending of traps. |
| 1.3.6.1.4.1.97.9.15.5 | Scalarels10-27trapRetry | read-write | mandatory | The number of times any enterprise-specific trap is to be sent for a given event. PDUs are retried using a truncated exponential backoff: 2 seconds, 4 seoncs, … |
| 1.3.6.1.4.1.97.9.15.6 | Scalarels10-27trapNumber | read-only | mandatory | The number of traps that are in the els10-27trapTable. |
| 1.3.6.1.4.1.97.9.15.7 | Tableels10-27trapTable | not-accessible | mandatory | This table contains the latest traps that have been generated. |
| 1.3.6.1.4.1.97.9.15.7.1 | Rowels10-27trapEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.9.15.7.1.1 | Columnels10-27trapEntryIndex | read-only | mandatory | A number representing the order in which the trap occurred in time. This 32 bit number can wrap. |
| 1.3.6.1.4.1.97.9.15.7.1.2 | Columnels10-27trapEntryTimeStamp | read-only | mandatory | The time at which the trap occurred. |
| 1.3.6.1.4.1.97.9.15.7.1.3 | Columnels10-27trapEntryText | read-only | mandatory | A description of the trap. |
| 1.3.6.1.4.1.97.9.15.7.1.4 | Columnels10-27trapEntryNumber | read-only | mandatory | The specific trap number, as specified in the TRAP PDU. |
| 1.3.6.1.4.1.97.9.15.7.1.5 | Columnels10-27trapEntrySeverity | read-only | mandatory | A user-definable severity, indicating the importance of the trap. |
| 1.3.6.1.4.1.97.9.16 | Nodeels10-27pingMgt | |||
| 1.3.6.1.4.1.97.9.16.1 | Scalarels10-27pingDataTimeout | read-write | mandatory | The time, in centiseconds, from the last ping activity (a send or receive of an ECHO_RESPONSE or ECHO_REQUEST message), to when the els10-27pingEntry informati… |
| 1.3.6.1.4.1.97.9.16.2 | Tableels10-27pingTable | not-accessible | mandatory | The set of information describing the active ping requests and their results. |
| 1.3.6.1.4.1.97.9.16.2.1 | Rowels10-27pingEntry | not-accessible | mandatory | The parameters, state, and results of a ping request. |
| 1.3.6.1.4.1.97.9.16.2.1.1 | Columnels10-27pingNMSAddr | read-only | mandatory | The IP address of the NMS, used to determine which ping request to return information on. |
| 1.3.6.1.4.1.97.9.16.2.1.2 | Columnels10-27pingDestAddr | read-write | mandatory | The IP address which is to be the destination of the ping ECHO_REQUEST. This variable cannot be set while els10-27pingOperation is on. |
| 1.3.6.1.4.1.97.9.16.2.1.3 | Columnels10-27pingState | read-only | mandatory | The current state of the ping request. |
| 1.3.6.1.4.1.97.9.16.2.1.4 | Columnels10-27pingCount | read-write | mandatory | The number of ping requests which are to be sent. This variable cannot be set while els10-27pingOperation is on. |
| 1.3.6.1.4.1.97.9.16.2.1.5 | Columnels10-27pingDataSize | read-write | mandatory | The datagram packet size which will be sent with the ECHO_REQUEST, in bytes. This variable cannot be set while els10-27pingOperation is on. |
| 1.3.6.1.4.1.97.9.16.2.1.6 | Columnels10-27pingWait | read-write | mandatory | The time, in centiseconds, between the sending of each ECHO_REQUEST message. This variable cannot be set while els10-27pingOperation is on. |
| 1.3.6.1.4.1.97.9.16.2.1.7 | Columnels10-27pingTimeOut | read-write | mandatory | The time, in centiseconds, since the last ECHO_RESPONSE was received (or the last ECHO_REQUEST was sent, if there have been no responses) when the ping request… |
| 1.3.6.1.4.1.97.9.16.2.1.8 | Columnels10-27pingOperation | read-write | mandatory | Setting els10-27pingOperation to on will begin the ping request. Setting els10-27pingOperation to off will terminate the ping request. |
| 1.3.6.1.4.1.97.9.16.2.1.9 | Columnels10-27pingMin | read-only | mandatory | The minimum round trip time for the ping requests and responses, in centiseconds. |
| 1.3.6.1.4.1.97.9.16.2.1.10 | Columnels10-27pingMax | read-only | mandatory | The maximum round trip for the ping requests and responses, in centiseconds. |
| 1.3.6.1.4.1.97.9.16.2.1.11 | Columnels10-27pingAvg | read-only | mandatory | The average round trip time for the ping requests and responses, in centiseconds. |
| 1.3.6.1.4.1.97.9.16.2.1.12 | Columnels10-27pingNumTransmitted | read-only | mandatory | The number of ICMP ECHO_REQUEST messages that have been transmitted during this ping request. |
| 1.3.6.1.4.1.97.9.16.2.1.13 | Columnels10-27pingNumReceived | read-only | mandatory | The number of ICMP ECHO_RESPONSE messages that have been received as a result of this ping request. |
| 1.3.6.1.4.1.97.9.17 | Nodeels10-27traceMgt | |||
| 1.3.6.1.4.1.97.9.17.1 | Scalarels10-27traceDataTimeout | read-write | mandatory | The time, in centiseconds, from the last traceroute activity (the response to or timeout of the last probe sent), to when the els10-27traceEntry information fo… |
| 1.3.6.1.4.1.97.9.17.2 | Tableels10-27traceTable | not-accessible | mandatory | The set of information describing the active traceroute requests and their results. |
| 1.3.6.1.4.1.97.9.17.2.1 | Rowels10-27traceEntry | not-accessible | mandatory | The parameters, state, and results of a traceroute request. |
| 1.3.6.1.4.1.97.9.17.2.1.1 | Columnels10-27traceNMSAddr | read-only | mandatory | The IP address of the NMS, used to determine which traceroute request to return information on. |
| 1.3.6.1.4.1.97.9.17.2.1.2 | Columnels10-27traceDestAddr | read-write | mandatory | The IP address which is to be the destination of the traceroute request.This variable cannot be set while els10-27traceOperation is on. |
| 1.3.6.1.4.1.97.9.17.2.1.3 | Columnels10-27traceMaxTTL | read-write | mandatory | The maximum time-to-live for outgoing traceroute probe packets. This determines the number of hops that can be in a traceroute. This variable cannot be set whi… |
| 1.3.6.1.4.1.97.9.17.2.1.4 | Columnels10-27traceDataSize | read-write | mandatory | The size of the datagram sent with each probe. This variable cannot be set while els10-27traceOperation is on. |
| 1.3.6.1.4.1.97.9.17.2.1.5 | Columnels10-27traceNumProbes | read-write | mandatory | The number of probes which are sent for each hop. This variable cannot be set while els10-27traceOperation is on. |
| 1.3.6.1.4.1.97.9.17.2.1.6 | Columnels10-27traceWait | read-write | mandatory | The time to wait in response to a probe. This variable cannot be set while els10-27traceOperation is on. |
| 1.3.6.1.4.1.97.9.17.2.1.7 | Columnels10-27traceOperation | read-write | mandatory | Setting els10-27traceOperation to on will begin the traceroute request. Setting els10-27traceOperation to off will terminate the traceroute request. |
| 1.3.6.1.4.1.97.9.17.2.1.8 | Columnels10-27traceHop | read-only | mandatory | The hop count for a set of probes with a particular TTL. |
| 1.3.6.1.4.1.97.9.17.2.1.9 | Columnels10-27traceHopAddr | read-only | mandatory | The IP address of the host which responded for a probe with a particular TTL. |
| 1.3.6.1.4.1.97.9.17.2.1.10 | Columnels10-27traceProbe | read-only | mandatory | The probe instance for a particular hop. |
| 1.3.6.1.4.1.97.9.17.2.1.11 | Columnels10-27traceState | read-only | mandatory | The current state of the trace probe. |
| 1.3.6.1.4.1.97.9.17.2.1.12 | Columnels10-27traceTime | read-only | mandatory | Round trip time of a probe for a particular hop. |
| 1.3.6.1.4.1.97.9.19 | Nodeels10-27volmirrorgroup | |||
| 1.3.6.1.4.1.97.9.19.1 | Scalarels10-27volmirrorMode | read-write | mandatory | To turn port mirroring on or off. |
| 1.3.6.1.4.1.97.9.19.2 | Scalarels10-27volmirrorPort | read-write | mandatory | The number of the port whose data will be mirrored to a special monitor or analyzer port. |
| 1.3.6.1.4.1.97.9.19.3 | Scalarels10-27volmonitorPort | read-write | mandatory | Identifies the monitor or analyzer port to receive frames from the special mirror port. |
| 1.3.6.1.4.1.97.9.19.4 | Tableels10-27volMirrorMacTable | not-accessible | mandatory | A table that contains information for the mirroring on MAC addresses. |
| 1.3.6.1.4.1.97.9.19.4.1 | Rowels10-27volmirrorMacEntry | not-accessible | mandatory | Information about specific unicast MAC addresses for which mirroring will act upon. |
| 1.3.6.1.4.1.97.9.19.4.1.1 | Columnels10-27volmirrorIndex | read-only | mandatory | Entry Index |
| 1.3.6.1.4.1.97.9.19.4.1.2 | Columnels10-27volmirrorMac1 | read-write | mandatory | First MAC address for mirroring. |
| 1.3.6.1.4.1.97.9.20 | Nodeels10-27VlanBridgeConfig | |||
| 1.3.6.1.4.1.97.9.20.1 | Scalarels10-27VlanVersionNumber | read-only | mandatory | Specifies the version IEEE 802.1Q VLAN that has been implemented to. |
| 1.3.6.1.4.1.97.9.20.2 | Scalarels10-27VlanOperatingMode | read-write | mandatory | Selects the mode of operation. The switch can operate as simply an 802.1d switch, or an 802.1d switch with IEEE VLAN capability (802.1Q). A read of this object… |
| 1.3.6.1.4.1.97.9.20.3 | Scalarels10-27VlanResetDefaults | read-write | mandatory | To reset the specified bridge. The filtering database is cleared and initialized with the entries specified in the Permananent database, and the Bridge protoco… |
| 1.3.6.1.4.1.97.9.20.4 | Scalarels10-27VlanGVRPEnable | read-write | mandatory | If the switch is operating in 802.1Q mode, this selects whether GVRP protocol messages should be processed and VLANs configured accordingly for each port on th… |
| 1.3.6.1.4.1.97.9.20.5 | Scalarels10-27VlanAccessList | read-write | mandatory | A list of ports that should act as 'Access Ports'. These ports will strip all tags on egress and also make use of a shared database that will automatically be … |
| 1.3.6.1.4.1.97.9.20.6 | Nodeels10-27VlanConfigVlan | |||
| 1.3.6.1.4.1.97.9.20.6.1 | Scalarels10-27VlanNumActiveEntries | read-only | mandatory | The number of active VLAN entries for the device. This includes both static and dynamic VLANs. |
| 1.3.6.1.4.1.97.9.20.6.2 | Scalarels10-27VlanNumConfiguredEntries | read-only | mandatory | The number of configured VLAN entries for the device. |
| 1.3.6.1.4.1.97.9.20.6.3 | Scalarels10-27VlanMaxNumEntries | read-only | mandatory | The maximum number of VLAN entries for the device. |
| 1.3.6.1.4.1.97.9.20.6.4 | Tableels10-27VlanConfigTable | not-accessible | mandatory | This table allows for the creation, deletion, and modification of specific VLANs. The ports defined within this group will be members of the 'member set' as de… |
| 1.3.6.1.4.1.97.9.20.6.4.1 | Rowels10-27VlanConfigEntry | not-accessible | mandatory | Allows for configuration of specific VLAN entries. Although this is configured as a table, there is only a single instance. Entries should be referenced as sim… |
| 1.3.6.1.4.1.97.9.20.6.4.1.1 | Columnels10-27VlanConfigIndex | read-write | mandatory | The index into the table of vlans. The table has 32 entries (0 - 31). An index value outside this range will reference the local variable. For example if the i… |
| 1.3.6.1.4.1.97.9.20.6.4.1.2 | Columnels10-27VlanConfigVID | read-write | mandatory | The 12 bit VLAN Identifier associated with the configured VLAN. Valid range (1..4094) |
| 1.3.6.1.4.1.97.9.20.6.4.1.3 | Columnels10-27VlanConfigPorts | read-write | mandatory | Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the next octet specifying ports 9… |
| 1.3.6.1.4.1.97.9.20.6.4.1.4 | Columnels10-27VlanConfigIP | read-write | mandatory | The IP address to be used to access the unit on this Vlan. This must be a valid host address. |
| 1.3.6.1.4.1.97.9.20.6.4.1.5 | Columnels10-27VlanConfigIPMask | read-write | mandatory | The IP subnet mask to be used with this IP address. |
| 1.3.6.1.4.1.97.9.20.6.4.1.6 | Columnels10-27VlanConfigName | read-write | mandatory | The ASCII name associated with this VLAN. |
| 1.3.6.1.4.1.97.9.20.6.4.1.7 | Columnels10-27VlanConfigStatus | read-write | mandatory | A set with any value of will create, modify or delete entries in the specified VLAN according to the vlaue in els10-27VlanConfigEstablish. |
| 1.3.6.1.4.1.97.9.20.6.4.1.8 | Columnels10-27VlanConfigEstablish | read-write | mandatory | A set of the value create(1), causes an entry to be created in the els10-27VlanConfigTable as specified by the instancing information of els10-27VlanConfigVID,… |
| 1.3.6.1.4.1.97.9.20.6.5 | Tableels10-27VlanConfigEgressTable | not-accessible | mandatory | This table allows for the specifying of the default VLAN ID for a specific port. If NOT configured as an 'Access' port, then packets containing this VLAN ID wi… |
| 1.3.6.1.4.1.97.9.20.6.5.1 | Rowels10-27VlanConfigEgressEntry | not-accessible | mandatory | Allows for configuration of specific Egress entries. Although this is configured as a table, there is only a single instance. Entries should be referenced as s… |
| 1.3.6.1.4.1.97.9.20.6.5.1.1 | Columnels10-27VlanEgressIndex | read-write | mandatory | The index into the Vlan table. A port must be a member of this Vlan prior to assigning this Id as the default. The table has 32 entries (0 - 31). An index valu… |
| 1.3.6.1.4.1.97.9.20.6.5.1.2 | Columnels10-27VlanEgressVID | read-write | mandatory | The 12 bit VLAN Identifier associated with the configured VLAN. Valid range (1..4094) |
| 1.3.6.1.4.1.97.9.20.6.5.1.3 | Columnels10-27VlanEgressList | read-write | mandatory | The set of ports to which traffic destined for the VLAN specified by els10-27VlanEgressVID on the device will have this tag stripped on egress. Each octet with… |
| 1.3.6.1.4.1.97.9.20.6.5.1.4 | Columnels10-27VlanEgressStatus | read-write | mandatory | A set with any value will change all associated entries in the els10-27VlanEgressList to have the default Vlan id set to the value in els10-27VlanEgressVID usi… |
| 1.3.6.1.4.1.97.9.20.6.6 | Tableels10-27VlanFilterGVRPTable | not-accessible | mandatory | This table allows for the specifying of VLAN ID's that will be resticted from being learnt by the device. If a GVRP packet is received specifying this VLAN ID,… |
| 1.3.6.1.4.1.97.9.20.6.6.1 | Rowels10-27VlanFilterGVRPEntry | not-accessible | mandatory | Allows for configuration of specific entries. Although this is configured as a table, there is only a single instance. Entries should be referenced as simple v… |
| 1.3.6.1.4.1.97.9.20.6.6.1.1 | Columnels10-27VlanFilterGVRPIndex | read-write | mandatory | The index into the Vlan Filter table. A maximum of 32 Vlan ID can be restricted from being learnt via GVRP. The table has 32 entries (0 - 31). An index value o… |
| 1.3.6.1.4.1.97.9.20.6.6.1.2 | Columnels10-27VlanFilterGVRPVID | read-write | mandatory | The 12 bit VLAN Identifier associated with the configured VLAN. Valid range (1..4094) |
| 1.3.6.1.4.1.97.9.20.6.6.1.3 | Columnels10-27VlanFilterGVRPList | read-write | mandatory | The set of ports that will be restricted from leaning of a VLAN ID from a GVRP message. The VLAN ID is specified by els10-27VlanFilterGVRPVID. Each octet withi… |
| 1.3.6.1.4.1.97.9.20.6.6.1.4 | Columnels10-27VlanFilterGVRPStatus | read-write | mandatory | A set with any value enables all associated entries in els10-27VlanFilterGVRPVID table for the specified VLAN. |
| 1.3.6.1.4.1.97.9.20.6.6.1.5 | Columnels10-27VlanFilterGVRPEstablishVID | read-write | mandatory | A set of the value create(1), will cause an entry to be created in the els10-27VlanFilterGVRPTable using els10-27VlanFilterGVRPIndex, els10-27VlanFilterGVRpVID… |
| 1.3.6.1.4.1.97.9.20.6.7 | Tableels10-27VlanStaticTable | not-accessible | mandatory | Allows for configuration of specific VLAN/MAC Address entries and to specify the port to which traffic destined for this address pair should be forwarded. Thes… |
| 1.3.6.1.4.1.97.9.20.6.7.1 | Rowels10-27VlanStaticEntry | not-accessible | mandatory | Allows for configuration of specific entries. Although this is configured as a table, there is only a single instance. Entries should be referenced as simple v… |
| 1.3.6.1.4.1.97.9.20.6.7.1.1 | Columnels10-27VlanStaticVID | read-write | mandatory | The 12 bit VLAN Identifier associated with the configured VLAN. Valid range (1..4094) |
| 1.3.6.1.4.1.97.9.20.6.7.1.2 | Columnels10-27VlanStaticMAC | read-write | mandatory | The media dependent physical address. |
| 1.3.6.1.4.1.97.9.20.6.7.1.3 | Columnels10-27VlanStaticPort | read-write | mandatory | An integer designating the port number to associate this address to. |
| 1.3.6.1.4.1.97.9.20.6.7.1.4 | Columnels10-27VlanStaticEstablish | read-write | mandatory | A set of the value create(1), causes an entry to be created as specified by the instancing information of els10-27VlanSaticVID, els10-27VlanStaticMAC, and els1… |
| 1.3.6.1.4.1.97.9.21 | Nodeels10-27volipmgroup | |||
| 1.3.6.1.4.1.97.9.21.1 | Scalarels10-27IPMulticastStatus | read-write | mandatory | Parameter to enable or disable IP multicast filtering on the device. When enabled, the device will examine IP Multicast data packets and dynamically set up fil… |
| 1.3.6.1.4.1.97.9.21.2 | Scalarels10-27ipmInterfaceRtr | read-write | mandatory | Parameter to enable or disable the inclusion of this interface in all Multicast filters. When enabled, all IP Multicast packets for all group filters will be t… |
| 1.3.6.1.4.1.97.9.22 | Nodeels10-27voligmpgroup | |||
| 1.3.6.1.4.1.97.9.22.1 | Scalarels10-27igmpStatus | read-write | mandatory | Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. The default i… |
| 1.3.6.1.4.1.97.9.22.2 | Scalarels10-27igmpQueryStatus | read-write | mandatory | Parameter to enable or disable the device to act as a Querier. If enabled, the device will send out a Query as a Proxy to solicit reports. The device will not … |
| 1.3.6.1.4.1.97.9.22.3 | Scalarels10-27igmpQueryCount | read-write | mandatory | Maximum number of queries that have not been heard on the system before the system starts taking action to solicit reports (default is 5). |
| 1.3.6.1.4.1.97.9.22.4 | Scalarels10-27igmpPortDelay | read-write | mandatory | Timeout value (mins) between IGMP Reports or IGMP Queries received on a port before the system times out the entry from the Multicast Address Filter (default i… |
| 1.3.6.1.4.1.97.9.22.5 | Tableels10-27igmpCacheTable | not-accessible | mandatory | The (conceptual) table listing the IP multicast groups for which there are members on a particular interface. |
| 1.3.6.1.4.1.97.9.22.5.1 | Rowels10-27igmpCacheEntry | not-accessible | mandatory | An entry (conceptual row) in the els10-27igmpCacheTable. |
| 1.3.6.1.4.1.97.9.22.5.1.1 | Columnels10-27igmpCacheAddress | read-only | mandatory | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.97.9.22.5.1.2 | Columnels10-27igmpCacheIfIndex | read-only | mandatory | The interface for which this entry contains infor- mation for an IP multicast group address. |
| 1.3.6.1.4.1.97.9.22.5.1.3 | Columnels10-27igmpCacheExpiryTime | read-only | mandatory | The minimum amount of time remaining before this entry will be aged out. |
| 1.3.6.1.4.1.97.9.23 | Nodeels10-27FlowControlCtl | |||
| 1.3.6.1.4.1.97.9.23.1 | Scalarels10-27FlowControlBackPressure | read-write | mandatory | Control back pressure on a system wide basis. On (1), Off (2) |
| 1.3.6.1.4.1.97.9.23.2 | Scalarels10-27FlowControlThresholdValue | read-write | mandatory | A value specified as a percent of the available buffers. When fewer than the percent of the avaialable buffers is detected, flow control will be initiated. Flo… |
| 1.3.6.1.4.1.97.9.23.3 | Scalarels10-27FlowControlPauseInteval | read-write | mandatory | A value between 10 and 65535. Each pause interval is equal to '5.12 microseconds'. A value of 10 will equal '51.2 microseconds'. |
| 1.3.6.1.4.1.97.9.23.4 | Tableels10-27FlowControlTable | not-accessible | mandatory | Provides a list of control objects over flow control parameters. |
| 1.3.6.1.4.1.97.9.23.4.1 | Rowels10-27FlowControlEntry | not-accessible | mandatory | Defines a particular entry containing objects pertaining to definition and control over flow control ports. |
| 1.3.6.1.4.1.97.9.23.4.1.1 | Columnels10-27FlowControlInterface | read-only | mandatory | The MIB2 interface for which this flow control information pertains |
| 1.3.6.1.4.1.97.9.23.4.1.2 | Columnels10-27FlowControlEnable | read-write | mandatory | Control 802.3x flow control on a per interface basis. On (1), Off (2) |
| 1.3.6.1.4.1.97.9.23.4.1.3 | Columnels10-27FlowControlRxPauseFrames | read-only | mandatory | The number of pause frames received on this interface. |
| 1.3.6.1.4.1.97.9.23.4.1.4 | Columnels10-27FlowControlTxPauseFrames | read-only | mandatory | The number of pause frames transmitted on this interface. |