CT-ELS100-MIB
146 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress TimeTicks |
| RFC1213-MIB | DisplayString ifInErrors ifOutErrors sysObjectID |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.1.2.1 | NodekxPortFunctionsTrap | Sent whenever the current functional state (active protocols) of the port has changed. | ||
| 1.3.6.1.2.1.1.2.2 | NodekxRxQueuesTrap | Sent whenever the number of times that the port's receiver has stopped receiving packets due to buffer space shortages has exceeded the port's limit. | ||
| 1.3.6.1.2.1.1.2.3 | NodekxTxStormFlagTrap | Sent whenever multicast storm protection has been invoked for the port. | ||
| 1.3.6.1.2.1.1.2.4 | NodekxTxCongestsTrap | Sent whenever packets destined for the unit itself were discarded due to lack of buffer space. | ||
| 1.3.6.1.2.1.1.2.5 | NodekxTrunkStateTrap | A trunking state change transition has occurred. The possible transitions are: Closed-Oneway Oneway-Perturbed Perturbed-Joined Joined-Helddown Closed-Helddown … | ||
| 1.3.6.1.2.1.1.2.6 | NodekxTrunkBridgeAddrTrap | The associated trunking MAC address of the bridge ID of the remote bridge has changed. | ||
| 1.3.6.1.2.1.1.2.7 | NodekxTrunkIPAddrTrap | The associated trunking IP address of the remote bridge has changed. | ||
| 1.3.6.1.2.1.1.2.8 | NodekxTrunkErrorTrap | An error has occurred in trunking. | ||
| 1.3.6.1.2.1.1.2.9 | NodekxTrunkLinkOrdinalTrap | The port's index in the trunking group has changed. | ||
| 1.3.6.1.2.1.1.2.10 | NodekxTrunkLinkCountTrap | The number of ports in the trunking group has changed. | ||
| 1.3.6.1.2.1.1.2.11 | NodekxDiagUnitBootedTrap | The unit has booted. kxadminFatalErr contains information about why the unit rebooted. | ||
| 1.3.6.1.2.1.1.2.12 | NodekxStorageFailureTrap | Sent if the unit's Configuration EEPROM has failed. The unit will not be able to reboot, and must be returned to the factory. | ||
| 1.3.6.1.2.1.1.2.13 | NodekxIfErrorsTrap | Sent whenever the number of hardware errors in received and transmitted packets has exceeded the port's limit. | ||
| 1.3.6.1.4.1.97 | Nodesigma | |||
| 1.3.6.1.4.1.97.1 | Nodesys | |||
| 1.3.6.1.4.1.97.1.1 | ScalarsysID | read-only | mandatory | An integer which serves to identify the type of SmartStack. |
| 1.3.6.1.4.1.97.1.2 | ScalarsysReset | read-write | mandatory | The time, in centiseconds, before the device should reboot. A GetResponse value of zero indicates that no reboot time has been specified. |
| 1.3.6.1.4.1.97.1.3 | ScalarsysTrapPort | read-write | mandatory | Zero, or the UDP port number to which a second copy of SNMP traps should be sent. Valid values are zero through 65535. |
| 1.3.6.1.4.1.97.8 | Nodeels-100 | |||
| 1.3.6.1.4.1.97.8.1 | Nodekxhw | |||
| 1.3.6.1.4.1.97.8.1.1 | ScalarkxhwDiagCode | read-only | mandatory | Additional diagnostics information concerning the slot's module. |
| 1.3.6.1.4.1.97.8.1.2 | ScalarkxhwManufData | read-only | mandatory | A 24-byte array which contains the part number, serial number and hardware revision level of this module. |
| 1.3.6.1.4.1.97.8.1.3 | ScalarkxhwPortCount | read-only | mandatory | |
| 1.3.6.1.4.1.97.8.2 | Nodekxsw | |||
| 1.3.6.1.4.1.97.8.2.1 | ScalarkxswNumber | read-only | mandatory | The number of file sets. The default is 2. |
| 1.3.6.1.4.1.97.8.2.2 | TablekxswFilesetTable | not-accessible | mandatory | A list of the software file sets stored. The first file set refers to the one that was used when ELS-100 last booted. The second file set refers to the one whi… |
| 1.3.6.1.4.1.97.8.2.2.1 | RowkxswFilesetEntry | not-accessible | mandatory | A set of objects for each file set. |
| 1.3.6.1.4.1.97.8.2.2.1.1 | ColumnkxswIndex | read-only | mandatory | The file set number, beginning with 1 for the first file set. This number always matches the instance of the swFiles. For example, {swIndex 2} contains the val… |
| 1.3.6.1.4.1.97.8.2.2.1.2 | ColumnkxswDesc | read-only | mandatory | The description (0-255 bytes) of the software file set. |
| 1.3.6.1.4.1.97.8.2.2.1.3 | ColumnkxswCount | read-only | mandatory | The number of files in the file set. This number may range from 1 to 255. |
| 1.3.6.1.4.1.97.8.2.2.1.4 | ColumnkxswType | read-only | mandatory | The types of the files within the file set. |
| 1.3.6.1.4.1.97.8.2.2.1.5 | ColumnkxswSizes | read-only | mandatory | An array (4 octets per file), containing the size of each of the files. Each size is encoded as a series of 4 bytes, which should be converted into a 32 bit in… |
| 1.3.6.1.4.1.97.8.2.2.1.6 | ColumnkxswStarts | read-only | mandatory | An array (4 octets per file), containing the software's execution starting address of each of the files. Each address is encoded as a series of 4 bytes, which … |
| 1.3.6.1.4.1.97.8.2.2.1.7 | ColumnkxswBases | read-only | mandatory | An array (4 octets per file), containing the software's base loading address of each of the files. Each address is encoded as a series of 4 bytes, which should… |
| 1.3.6.1.4.1.97.8.2.2.1.8 | ColumnkxswFlashBank | read-only | mandatory | The bank number where the software file set resides. |
| 1.3.6.1.4.1.97.8.3 | Nodekxadmin | |||
| 1.3.6.1.4.1.97.8.3.1 | ScalarkxadminFatalErr | read-only | mandatory | This is a 32 byte array which contains information about the cause of the previous system reset. This will describe the circumstances which forced the system s… |
| 1.3.6.1.4.1.97.8.3.2 | ScalarkxadminAnyPass | read-write | mandatory | The authentication password (0-24 bytes) which must match the community name in an SNMP PDU, in order for the operation to be performed. A zero length password… |
| 1.3.6.1.4.1.97.8.3.3 | ScalarkxadminGetPass | read-write | mandatory | The authentication password (0-24 bytes) which must match the community name in an SNMP Get PDU (except for Debug or password parameters). A zero length passwo… |
| 1.3.6.1.4.1.97.8.3.4 | ScalarkxadminNMSIPAddr | read-write | mandatory | The address of the NMS to which Trap PDUs are to be sent. A value of zero indicates that Trap PDUs should be sent to the NMS last heard from. |
| 1.3.6.1.4.1.97.8.3.5 | ScalarkxadminStorageFailure | read-only | mandatory | Whether the ELS-100's storage facility for its configuration parameters has failed (the ELS-100 may not be able to reboot after such a failure). |
| 1.3.6.1.4.1.97.8.3.6 | ScalarkxadminAuthenticationFailure | read-only | mandatory | All nulls, or the IP source address within the last SNMP PDU which caused an SNMP authentication failure. |
| 1.3.6.1.4.1.97.8.3.7 | ScalarkxadminNAMReceiveCongests | read-only | mandatory | |
| 1.3.6.1.4.1.97.8.3.8 | ScalarkxadminArpEntries | read-only | mandatory | The number of ARP entries for all interfaces. |
| 1.3.6.1.4.1.97.8.3.9 | ScalarkxadminArpStatics | read-only | mandatory | The number of statically defined ARP entries for all interfaces. |
| 1.3.6.1.4.1.97.8.3.10 | ScalarkxadminArpOverflows | read-only | mandatory | The number of times a ARP entry could not be learned due to insufficient address table space. |
| 1.3.6.1.4.1.97.8.3.11 | ScalarkxadminRipPreference | read-write | mandatory | The value to assign to ipRouteMetric2, when adding a RIP-learned entry to the IP Routing Table. |
| 1.3.6.1.4.1.97.8.3.12 | ScalarkxadminRipRouteDiscards | read-only | mandatory | The number of times a route learned via RIP was not added to the IP Routing Table due to insufficient Routing Table space. |
| 1.3.6.1.4.1.97.8.3.13 | ScalarkxadminRebootConfig | read-write | mandatory | The configuration file that will be used when the ELS-100 reboots. This parameter is normally automatically set by the ELS-100; however, an NMS may explicitly … |
| 1.3.6.1.4.1.97.8.3.14 | ScalarkxadminDisableButton | read-write | mandatory | |
| 1.3.6.1.4.1.97.8.3.15 | ScalarkxadminButtonSelection | read-write | mandatory | |
| 1.3.6.1.4.1.97.8.3.16 | ScalarkxadminLEDProgramOption | read-write | mandatory | |
| 1.3.6.1.4.1.97.8.4 | Nodekxswdis | |||
| 1.3.6.1.4.1.97.8.4.1 | ScalarkxswdisDesc | read-only | mandatory | The description (0-32 bytes) of the software set currently being downloaded, or a description of the software set last downloaded since the ELS100-16 booted. |
| 1.3.6.1.4.1.97.8.4.2 | ScalarkxswdisAccess | read-write | mandatory | The version of software that may be downloaded. Attempts to download other versions of software will be rejected. The value for swdisAccess is embedded within … |
| 1.3.6.1.4.1.97.8.4.3 | ScalarkxswdisWriteStatus | read-only | mandatory | The status of the erase/write operation. |
| 1.3.6.1.4.1.97.8.4.4 | ScalarkxswdisConfigIp | read-write | mandatory | The IP address of the NMS (i.e., any IP host) that is allowed to use TFTP to send/retrieve the configuration file of the ELS100-16. A value of 0.0.0.0 (which i… |
| 1.3.6.1.4.1.97.8.4.5 | ScalarkxswdisConfigRetryTime | read-write | mandatory | The number of seconds that the ELS-100 will wait for an acknowledgment before it retransmits an unacknowledged TFTP data block. The factory specified default i… |
| 1.3.6.1.4.1.97.8.4.6 | ScalarkxswdisConfigTotalTimeout | read-write | mandatory | The number of seconds that the ELS-100 will wait for an acknowledgment to a data block before it cancels a TFTP session. The factory specified default is 25 se… |
| 1.3.6.1.4.1.97.8.5 | Nodekxaddr | |||
| 1.3.6.1.4.1.97.8.5.1 | ScalarkxaddrStatics | read-only | mandatory | The number of static addresses which are currently stored in the ELS100-16. |
| 1.3.6.1.4.1.97.8.5.2 | ScalarkxaddrDynamics | read-only | mandatory | The number of learned addresses in the address table. |
| 1.3.6.1.4.1.97.8.5.3 | ScalarkxaddrDynamicMax | read-write | mandatory | The maximum number of spanning tree addresses which have been learned since the ELS100-16 was last booted (or this parameter was last reset by the NMS). |
| 1.3.6.1.4.1.97.8.5.4 | ScalarkxaddrDynamicOverflows | read-only | mandatory | The number times an address was not learned due to insufficient address table space. |
| 1.3.6.1.4.1.97.8.5.5 | ScalarkxaddrFlags | read-write | mandatory | Flags to describe the use and control of this address entry. Each bit has a different meaning. The NMS must always set either entry-static, entry-none, or entr… |
| 1.3.6.1.4.1.97.8.5.6 | ScalarkxaddrMAC | read-write | mandatory | The MAC address for this address definition. |
| 1.3.6.1.4.1.97.8.5.7 | ScalarkxaddrPort | read-write | mandatory | The port through which this address is connected to the ELS100 (only valid for entry-dynamic-local, entry-statistics, and entry-port entries). |
| 1.3.6.1.4.1.97.8.5.8 | ScalarkxaddrOperation | read-write | mandatory | The operation to be performed upon the described address. The possibilities include: read-random (1), read-next (2), update (4), delete (5), read-block (6). |
| 1.3.6.1.4.1.97.8.5.9 | ScalarkxaddrIndex | read-write | mandatory | The index number to be used for read-next and read-block operations. When the ELS-100 boots, addrIndex is initialized to -1. |
| 1.3.6.1.4.1.97.8.5.10 | ScalarkxaddrNext | read-write | mandatory | The next value to use for addrIndex, when you use read-next or read-block operations to read the address table. When the ELS-100 boots, addrNext is initialized… |
| 1.3.6.1.4.1.97.8.5.11 | ScalarkxaddrBlockSize | read-write | mandatory | The number of addresses contained by addrBlock. This parameter is only used for dumping blocks of MAC addresses. |
| 1.3.6.1.4.1.97.8.5.12 | ScalarkxaddrBlock | read-write | mandatory | A series of 0-700 octets, which represents 0-100 addresses. Each address consists of a 6 octet MAC address followed by a 1 byte port number. If the port number… |
| 1.3.6.1.4.1.97.8.6 | Nodekxif | |||
| 1.3.6.1.4.1.97.8.6.1 | TablekxifTable | not-accessible | mandatory | A list of interface entries; one per port. |
| 1.3.6.1.4.1.97.8.6.1.1 | RowkxifEntry | not-accessible | mandatory | A set of objects for an interface entry. |
| 1.3.6.1.4.1.97.8.6.1.1.1 | ColumnkxifIndex | read-only | mandatory | The port number, beginning with 1 for the first port. |
| 1.3.6.1.4.1.97.8.6.1.1.2 | ColumnkxifRxCnt | read-only | mandatory | The number of small data buffers for receiving packets. |
| 1.3.6.1.4.1.97.8.6.1.1.3 | ColumnkxifTxCnt | read-only | mandatory | The maximum size of the port's transmit queue, i.e., the number of packets that can be in the port's transmit queue, waiting to be transmitted. |
| 1.3.6.1.4.1.97.8.6.1.1.4 | ColumnkxifThreshold | read-write | mandatory | Maximum number of combined receive and transmit packet hardware errors before an alarm should be generated. |
| 1.3.6.1.4.1.97.8.6.1.1.5 | ColumnkxifThresholdTime | read-write | mandatory | The time period (in seconds) to which kxifThreshold applies. A value of zero will disable the kxifThreshold alarm. |
| 1.3.6.1.4.1.97.8.6.1.1.6 | ColumnkxifRxQueueThresh | read-write | mandatory | Maximum number of receive packet queue overflow errors before an alarm should be generated. |
| 1.3.6.1.4.1.97.8.6.1.1.7 | ColumnkxifRxQueueThreshTime | read-write | mandatory | The time period (in seconds) to which kxifRxQueueThresh applies. A value of zero will disable the kxifRxQueueThresh alarm. |
| 1.3.6.1.4.1.97.8.6.1.1.8 | ColumnkxifFunction | read-only | mandatory | The current functional state (protocols which have been activated and are operational) of the port. The following values or combinations are supported: 0x0001 … |
| 1.3.6.1.4.1.97.8.6.1.1.9 | ColumnkxifStatisticsTime | read-only | mandatory | Length of time during which statistics were collected. |
| 1.3.6.1.4.1.97.8.7 | Nodekxuart | |||
| 1.3.6.1.4.1.97.8.7.1 | TablekxuartTable | not-accessible | mandatory | A list of interface entries; one per UART port. |
| 1.3.6.1.4.1.97.8.7.1.1 | RowkxuartEntry | not-accessible | mandatory | A set of objects for an interface entry. |
| 1.3.6.1.4.1.97.8.7.1.1.1 | ColumnkxuartIndex | read-only | mandatory | The ELS-100's port number of the port. |
| 1.3.6.1.4.1.97.8.7.1.1.2 | ColumnkxuartBaud | read-write | mandatory | This is the desired baud rate. Only 1200 baud through 19,200 baud are supported by the ELS-100. |
| 1.3.6.1.4.1.97.8.7.1.1.3 | ColumnkxuartAlignmentErrors | read-only | mandatory | Number of received packets with frame alignment errors, since the port was last enabled. |
| 1.3.6.1.4.1.97.8.7.1.1.4 | ColumnkxuartOverrunErrors | read-only | mandatory | Number of received packets with data overrun errors, since the port was last enabled. |
| 1.3.6.1.4.1.97.8.8 | Nodekxproto | |||
| 1.3.6.1.4.1.97.8.8.1 | TablekxprotoTable | not-accessible | mandatory | This table contains configuration information specifying the types of protocols used to bridge and filter frames for each port. |
| 1.3.6.1.4.1.97.8.8.1.1 | RowkxprotoEntry | not-accessible | mandatory | Each entry in this table specifies which protocols are used by a particular port in the SmartStack. |
| 1.3.6.1.4.1.97.8.8.1.1.1 | ColumnkxprotoIfIndex | read-only | mandatory | Identifies the interface (port) to which this entry's information belongs. The value of this variable corresponds to ifIndex, as well as most of the other port… |
| 1.3.6.1.4.1.97.8.8.1.1.2 | ColumnkxprotoBridge | read-write | mandatory | Defines the bridging method to be applied to frames received at, or destined for, this port. Ports may be configured for transparent or none. The UART may only… |
| 1.3.6.1.4.1.97.8.8.1.1.3 | ColumnkxprotoSuppressBpdu | read-write | mandatory | Allows transmission of spanning tree protocol packets to be suppressed. If normal(1), 802.1d spanning tree packets are transmitted as usual. If suppressed(2), … |
| 1.3.6.1.4.1.97.8.8.1.1.4 | ColumnkxprotoRipListen | read-write | mandatory | Specifies whether the port should listen for internet Routing Information Protocol (RFC-1058) packets, in order to build the routing table for the unit. |
| 1.3.6.1.4.1.97.8.8.1.1.5 | ColumnkxprotoTrunking | read-write | mandatory | Specifies whether SmartStack trunking protocol (an extension to the standard Spanning Tree) is to be used over this port. |
| 1.3.6.1.4.1.97.8.9 | Nodekxtrunk | |||
| 1.3.6.1.4.1.97.8.9.1 | TablekxtrunkTable | not-accessible | mandatory | This table describes the trunking status and attributes of the interfaces that are configured for bridge trunking. |
| 1.3.6.1.4.1.97.8.9.1.1 | RowkxtrunkEntry | not-accessible | mandatory | An entry exists in this table for each physical interface (port) that is configured for trunking. |
| 1.3.6.1.4.1.97.8.9.1.1.1 | ColumnkxtrunkIfIndex | read-only | mandatory | Identifies a physical interface (port) which is configured for LAN trunking. The value of this variable corresponds to ifIndex, as well as most of the other po… |
| 1.3.6.1.4.1.97.8.9.1.1.2 | ColumnkxtrunkState | read-only | mandatory | If off(1) then this link has not been enabled for trunking. If closed(2) then this link has not yet received any Trunking PDUs. If oneway(3) then incoming Trun… |
| 1.3.6.1.4.1.97.8.9.1.1.3 | ColumnkxtrunkRemoteBridgeAddr | read-only | mandatory | The MAC address portion of the bridge ID of the remote bridge. |
| 1.3.6.1.4.1.97.8.9.1.1.4 | ColumnkxtrunkRemoteIp | read-only | mandatory | The IP address of the remote bridge, as reported by that bridge for administrative purposes. |
| 1.3.6.1.4.1.97.8.9.1.1.5 | ColumnkxtrunkLastError | read-only | mandatory | The last reason for failure when the link is in closed, oneway, or helddown state. |
| 1.3.6.1.4.1.97.8.9.1.1.6 | ColumnkxtrunkLinkOrdinal | read-only | mandatory | The position of this link within the trunk group. |
| 1.3.6.1.4.1.97.8.9.1.1.7 | ColumnkxtrunkLinkCount | read-only | mandatory | The number of links within the trunk group. |
| 1.3.6.1.4.1.97.8.9.1.1.8 | ColumnkxtrunkLastChange | read-only | mandatory | The number of seconds since kxtrunkState changed. |
| 1.3.6.1.4.1.97.8.10 | Nodekxworkgroup | |||
| 1.3.6.1.4.1.97.8.10.1 | ScalarkxWorkGroupNextNumber | read-only | mandatory | The next available workgroup number to be used. When creating a new workgroup, it is recommended to read the value of the variable and use it to key into the w… |
| 1.3.6.1.4.1.97.8.10.2 | ScalarkxWorkGroupCurrentCount | read-only | mandatory | The total number of workgroups currently defined. |
| 1.3.6.1.4.1.97.8.10.3 | ScalarkxWorkGroupMaxCount | read-only | mandatory | The maximum number of workgroups allowed. |
| 1.3.6.1.4.1.97.8.10.4 | TablekxWorkGroupTable | not-accessible | mandatory | This table contains work group definitions for the interfaces. |
| 1.3.6.1.4.1.97.8.10.4.1 | RowkxWorkGroupEntry | not-accessible | mandatory | Each entry in this table contains a definition of a work group. |
| 1.3.6.1.4.1.97.8.10.4.1.1 | ColumnkxWorkGroupNumber | read-write | mandatory | An integer that identifies the work group, used as an index to this table. |
| 1.3.6.1.4.1.97.8.10.4.1.2 | ColumnkxWorkGroupName | read-write | mandatory | A 1-16 character work group name. |
| 1.3.6.1.4.1.97.8.10.4.1.3 | ColumnkxWorkGroupPorts | read-write | mandatory | A list of all ports within the group. The first octet specified ports 1-8, the second 9-16, etc. |
| 1.3.6.1.4.1.97.8.10.4.1.4 | ColumnkxWorkGroupType | read-write | mandatory | The type of work group: all - no additional information needs to be supplied. |
| 1.3.6.1.4.1.97.8.11 | NodekxtrapMgt | |||
| 1.3.6.1.4.1.97.8.11.1 | TablekxtrapControlTable | not-accessible | mandatory | This table contains information about the severity of each trap and whether the trap is currently enabled. |
| 1.3.6.1.4.1.97.8.11.1.1 | RowkxtrapControlEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.8.11.1.1.1 | ColumnkxtrapIndex | read-only | mandatory | The specific trap number. |
| 1.3.6.1.4.1.97.8.11.1.1.2 | ColumnkxtrapEnabled | read-write | mandatory | Enable or disable the generation of this trap. |
| 1.3.6.1.4.1.97.8.11.1.1.3 | ColumnkxtrapSeverity | read-write | mandatory | A user-definable severity, indicating the importance of the trap. |
| 1.3.6.1.4.1.97.8.11.1.1.4 | ColumnkxtrapText | read-only | mandatory | A description of the trap. |
| 1.3.6.1.4.1.97.8.11.2 | TablekxtrapSeverityControlTable | not-accessible | mandatory | This table contains information about whether a class of traps of a particular severity is enabled or disabled. |
| 1.3.6.1.4.1.97.8.11.2.1 | RowkxtrapSeverityControlEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.8.11.2.1.1 | ColumnkxtrapSeverityControlSeverity | read-write | mandatory | A user-definable severity, indicating the importance of the trap. |
| 1.3.6.1.4.1.97.8.11.2.1.2 | ColumnkxtrapSeverityEnable | read-write | mandatory | Enable or disable all traps of a given severity level. |
| 1.3.6.1.4.1.97.8.11.3 | ScalarkxtrapIncludeText | read-write | mandatory | Whether or not a formatted text string is included in the trap PDU. |
| 1.3.6.1.4.1.97.8.11.4 | ScalarkxtrapTime | read-write | mandatory | The time, in centiseconds, which should expire between the sending of traps. |
| 1.3.6.1.4.1.97.8.11.5 | ScalarkxtrapRetry | read-write | mandatory | The number of times any enterprise-specific trap is to be sent for a given event. PDUs are retried using a truncated exponential backoff: 2 seconds, 4 seconds,… |
| 1.3.6.1.4.1.97.8.11.6 | ScalarkxtrapNumber | read-only | mandatory | The number of traps that are in the kxtrapTable. |
| 1.3.6.1.4.1.97.8.11.7 | TablekxtrapTable | not-accessible | mandatory | This table contains the latest traps that have been generated. |
| 1.3.6.1.4.1.97.8.11.7.1 | RowkxtrapEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.97.8.11.7.1.1 | ColumnkxtrapEntryIndex | read-only | mandatory | A number representing the order in which the trap occurred in time. This 32 bit number can wrap. |
| 1.3.6.1.4.1.97.8.11.7.1.2 | ColumnkxtrapEntryTimeStamp | read-only | mandatory | The time at which the trap occurred. |
| 1.3.6.1.4.1.97.8.11.7.1.3 | ColumnkxtrapEntryText | read-only | mandatory | A description of the trap. |
| 1.3.6.1.4.1.97.8.11.7.1.4 | ColumnkxtrapEntryNumber | read-only | mandatory | The specific trap number, as specified in the TRAP PDU. |
| 1.3.6.1.4.1.97.8.11.7.1.5 | ColumnkxtrapEntrySeverity | read-only | mandatory | A user-definable severity, indicating the importance of the trap. |
| 1.3.6.1.4.1.97.8.12 | Nodekxmirrorgroup | |||
| 1.3.6.1.4.1.97.8.12.1 | ScalarkxmirrorMode | read-write | mandatory | To turn off port mirroring, or turn on by specifying rx, tx, or (rxandtx) which is the type of data to be mirrored. |
| 1.3.6.1.4.1.97.8.12.2 | ScalarkxmirrorDiagPort | read-write | mandatory | This entry identifies the diagnostic port to which mirrored packet will be destined. |
| 1.3.6.1.4.1.97.8.12.3 | ScalarkxmirrorTargetPortLists | read-write | mandatory | An octet string specifies the list of ports to be mirrored. The first octet specifies ports 1-8 and the second 9-16. |