CT-PRIORITY-CLASSIFY-MIB
17 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-MIB-NAMES | ctPriorityExt |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.14.5 | NodectPriorityExtClassifyConfig | |||
| 1.3.6.1.4.1.52.4.1.2.14.5.1 | NodepClassifyRTP | |||
| 1.3.6.1.4.1.52.4.1.2.14.5.1.1 | ScalarpClassifyRTPLowDelayQueuePreference | read-write | mandatory | This value represents one of eight preference levels, 0 through 7, with 0 being the worst and 7 the best. The value will be translated by the device into a thr… |
| 1.3.6.1.4.1.52.4.1.2.14.5.1.2 | ScalarpClassifyRTCPParsing | read-write | mandatory | This object will enable or disable parsing of all forwarded packets looking for RTCP packets. Enabled(2) means that all fowarded packets will be parsed for RTC… |
| 1.3.6.1.4.1.52.4.1.2.14.5.1.3 | TablepClassifyRTPTable | not-accessible | mandatory | A list describing which MIB-II interfaces will allow 802.1 P/Q tagging or modification of the precedence field in the TOS portion of an IP packet or both. It a… |
| 1.3.6.1.4.1.52.4.1.2.14.5.1.3.1 | RowpClassifyRTPEntry | not-accessible | mandatory | This entry for pClassifyRTPEntry. |
| 1.3.6.1.4.1.52.4.1.2.14.5.1.3.1.1 | ColumnpClassifyRTPInterfaceNumber | read-only | mandatory | The index of the MIB-II interface that the packet is destined for. |
| 1.3.6.1.4.1.52.4.1.2.14.5.1.3.1.2 | ColumnpClassifyRTPState | read-write | mandatory | This object will enable or disable modification of the TOS precedence field and the 802.1 P/Q tagging. A value of NoModification(1) implies that modification i… |
| 1.3.6.1.4.1.52.4.1.2.14.5.1.3.1.3 | ColumnpClassifyRTPTOSPrecedence | read-write | mandatory | This value represents one of eight precedence levels, 0 through 7, with 0 being the lowest and 7 the highest. The value will be translated by the device into a… |
| 1.3.6.1.4.1.52.4.1.2.14.5.1.3.1.4 | ColumnpClassifyRTPTagPriority | read-write | mandatory | This value represents one of eight priority levels, 0 through 7, with 0 being the lowest and 7 the highest. The value will be translated by the device into a t… |
| 1.3.6.1.4.1.52.4.1.2.14.5.1.3.1.5 | ColumnpClassifyRTPTagVID | read-write | mandatory | This value represents a twelve bit VLAN identifier (VID) as specified in the IEEE 802.1Q standard. This object will provide a twelve bit VID in the TCI (Tag Co… |
| 1.3.6.1.4.1.52.4.1.2.14.5.2 | NodepClassifyUDP | |||
| 1.3.6.1.4.1.52.4.1.2.14.5.2.1 | TablepClassifyUDPTable | not-accessible | mandatory | A list of UDP destination port numbers, UDP packets whose port numbers appear in this table will be put on a low delay queue, and the preference specified. |
| 1.3.6.1.4.1.52.4.1.2.14.5.2.1.1 | RowpClassifyUDPEntry | not-accessible | mandatory | A list of objects that describe the UDP port numbers that qualify as candidates for low delay queue preference classification. |
| 1.3.6.1.4.1.52.4.1.2.14.5.2.1.1.1 | ColumnpClassifyUDPPortNumber | read-write | mandatory | The UDP destination port number tha qualifies as a candidate for low delay classification. |
| 1.3.6.1.4.1.52.4.1.2.14.5.2.1.1.2 | ColumnpClassifyUDPState | read-write | mandatory | A packet with UDP port number equal to pClassifyUDPPortNumber will be put on a low_delay queue if state is Enabled(2). |
| 1.3.6.1.4.1.52.4.1.2.14.5.2.1.1.3 | ColumnpClassifyUDPLowDelayQueuePreference | read-write | mandatory | Preference with which packet with UDP destination port number equal to pClassifyUDPPortNumberis put on the queue. |