CTELS100-NG-MIB
69 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises mgmt NetworkAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.4.1.52 | Nodecabletron | |||
| 1.3.6.1.4.1.52.1011 | Nodeels100 | |||
| 1.3.6.1.4.1.52.1011.1 | Nodeels100SystemConfig | |||
| 1.3.6.1.4.1.52.1011.1.1 | Scalarels100SysSerialno | read-only | mandatory | The serial number of the system. |
| 1.3.6.1.4.1.52.1011.1.2 | Scalarels100SysTftpIPAddress | read-write | mandatory | The IP address of the TFTP server from which a software download is to be initiated. This variable must be set before a TFTP download can be started with the e… |
| 1.3.6.1.4.1.52.1011.1.3 | Scalarels100SysTftpFilename | read-write | mandatory | The name of the software upgrade file residing on the TFTP server. Path information must be included in the file name. This variable must be set before a TFTP … |
| 1.3.6.1.4.1.52.1011.1.4 | Scalarels100SysPowerupCount | read-only | mandatory | The total number of times the system has powered up since it was shipped from the factory. |
| 1.3.6.1.4.1.52.1011.1.5 | Scalarels100SysBrcastCutoffRate | read-write | mandatory | The Broadcast Cutoff Rate of the switch allowing for the control of broadcast storms. The value of this variable sets a per second rate. If the broadcast and u… |
| 1.3.6.1.4.1.52.1011.1.6 | Scalarels100SysGatewayIPAddress | read-write | mandatory | The IP address of the next hop router (gateway) to which frames destined for an IP subnet different than what the system resides are sent. |
| 1.3.6.1.4.1.52.1011.1.7 | Scalarels100SysTftpStartDownload | read-write | mandatory | Start a TFTP download. A SET of this variable with the value download (1) initiates a TFTP download to upgrade the system software. The variables els100SysTftp… |
| 1.3.6.1.4.1.52.1011.1.8 | Scalarels100SysBootPDhcpEnable | read-write | mandatory | Enable or disable the operation of the BootP and DHCP protocols on the system. These protocols are used for automatically configuring the system's IP address i… |
| 1.3.6.1.4.1.52.1011.1.10 | Scalarels100SysReset | read-write | mandatory | Initiate a software reset of the system. |
| 1.3.6.1.4.1.52.1011.1.11 | Scalarels100SysSyslogServer | read-write | mandatory | The IP address of the Syslog Server. |
| 1.3.6.1.4.1.52.1011.1.12 | Scalarels100SysLowestSyslogSeverity | read-write | mandatory | The Lowest Syslog Severity Level. All logs with the same or higher severity will be delivered. Note: higher severity has lower number. |
| 1.3.6.1.4.1.52.1011.1.13 | Scalarels100SysComPortEnable | read-write | mandatory | The administrative state of the Com Port. |
| 1.3.6.1.4.1.52.1011.1.14 | Scalarels100SysBoardID | read-only | mandatory | The system board ID. |
| 1.3.6.1.4.1.52.1011.2 | Tableels100PortTable | not-accessible | mandatory | The port table. |
| 1.3.6.1.4.1.52.1011.2.1 | Rowels100PortEntry | not-accessible | mandatory | An entry in the port table. |
| 1.3.6.1.4.1.52.1011.2.1.1 | Columnels100Port | read-only | mandatory | The number of the port, from 1 to the number of ports on the system. |
| 1.3.6.1.4.1.52.1011.2.1.2 | Columnels100PortStatus | read-only | mandatory | The connection (link) status of the port, either up (linked) or down (not linked). |
| 1.3.6.1.4.1.52.1011.2.1.3 | Columnels100PortDuplexStatus | read-write | mandatory | The duplex status of the port, either half duplex or full duplex. |
| 1.3.6.1.4.1.52.1011.2.1.4 | Columnels100PortForwardedFrames | read-only | mandatory | The number of frames received on the port and forwarded to another port on the system module for processing. |
| 1.3.6.1.4.1.52.1011.2.1.5 | Columnels100PortRcvdLocalFrames | read-only | mandatory | The number of frames received where the destination is on the port. |
| 1.3.6.1.4.1.52.1011.2.1.6 | Columnels100PortName | read-write | mandatory | A descriptive string of up to 60 characters used by the network administrator to name the port. |
| 1.3.6.1.4.1.52.1011.2.1.7 | Columnels100PortEnable | read-write | mandatory | The enable status of the port, either enable or disable. |
| 1.3.6.1.4.1.52.1011.2.1.8 | Columnels100PortSpeed | read-write | mandatory | The speed the port is operating at: 10Mbps, or 100Mbps, or 1000Mbps. |
| 1.3.6.1.4.1.52.1011.2.1.9 | Columnels100PortAutonegEnable | read-write | mandatory | The auto-negotiation status of the port, either enable or disable. When in the enable (2) state, the port will automatically configure its duplex and speed ope… |
| 1.3.6.1.4.1.52.1011.2.1.10 | Columnels100PortFlowControlEnable | read-write | mandatory | The state of flow control operation of the port, either enable or disable. |
| 1.3.6.1.4.1.52.1011.2.1.11 | Columnels100PortType | read-only | mandatory | Port physical interface type. |
| 1.3.6.1.4.1.52.1011.3 | Nodeels100Switch | |||
| 1.3.6.1.4.1.52.1011.3.1 | Scalarels100SwitchIPAddress | read-write | mandatory | The IP address of the system. |
| 1.3.6.1.4.1.52.1011.3.2 | Scalarels100SwitchSubnetMask | read-write | mandatory | The subnet mask associated with the IP address of the system. |
| 1.3.6.1.4.1.52.1011.3.3 | Scalarels100ActiveAgingTime | read-write | mandatory | The aging time of entries in the MAC address forwarding table of the system. |
| 1.3.6.1.4.1.52.1011.3.5 | Scalarels100SwitchSTPStatus | read-write | mandatory | The Spanning Tree status of the system, enter on or off. |
| 1.3.6.1.4.1.52.1011.3.6 | Nodeels100SwitchManager | |||
| 1.3.6.1.4.1.52.1011.3.6.1 | Scalarels100SwitchTrapRcvr1 | read-write | mandatory | The IP address of the first SNMP manager to which traps from the system are directed. |
| 1.3.6.1.4.1.52.1011.3.6.2 | Scalarels100SwitchTrapCommunity1 | read-write | mandatory | The community name of the first SNMP manager to which traps from the system are directed. |
| 1.3.6.1.4.1.52.1011.3.6.3 | Scalarels100SwitchTrapRcvr2 | read-write | mandatory | The IP address of the second SNMP manager to which traps from the system are directed. |
| 1.3.6.1.4.1.52.1011.3.6.4 | Scalarels100SwitchTrapCommunity2 | read-write | mandatory | The community name of the second SNMP manager to which traps from the system are directed. |
| 1.3.6.1.4.1.52.1011.3.6.5 | Scalarels100SwitchTrapRcvr3 | read-write | mandatory | The IP address of the third SNMP manager to which traps from the system are directed. |
| 1.3.6.1.4.1.52.1011.3.6.6 | Scalarels100SwitchTrapCommunity3 | read-write | mandatory | The community name of the third SNMP manager to which traps from the system are directed. |
| 1.3.6.1.4.1.52.1011.3.6.7 | Scalarels100SwitchTrapRcvr4 | read-write | mandatory | The IP address of the fourth SNMP manager to which traps from the system are directed. |
| 1.3.6.1.4.1.52.1011.3.6.8 | Scalarels100SwitchTrapCommunity4 | read-write | mandatory | The community name of the fourth SNMP manager to which traps from the system are directed. |
| 1.3.6.1.4.1.52.1011.3.7 | Scalarels100SwitchPortMirroringStatus | read-write | mandatory | The Port Mirroring status of the system, either disable or enable. |
| 1.3.6.1.4.1.52.1011.3.8 | Scalarels100SwitchMirroredPort | read-write | mandatory | The port that is being mirrored - the source. |
| 1.3.6.1.4.1.52.1011.3.9 | Scalarels100SwitchMirroringPort | read-write | mandatory | The port that is mirroring - the destination. |
| 1.3.6.1.4.1.52.1011.3.10 | Scalarels100SwitchXmitMirrorEnable | read-write | mandatory | Enable or disable the mirroring of transmitted traffic out the mirrored port to the mirroring port. |
| 1.3.6.1.4.1.52.1011.3.11 | Scalarels100SwitchRcvMirrorEnable | read-write | mandatory | Enable or disable the mirroring of received traffic into the mirrored port to the mirroring port. |
| 1.3.6.1.4.1.52.1011.3.12 | Scalarels100SwitchVlanEnable | read-write | mandatory | Globally enable or disable the VLAN operation of the system. |
| 1.3.6.1.4.1.52.1011.3.13 | Tableels100SwitchVlanConfigTable | not-accessible | mandatory | The VLAN configuration table. |
| 1.3.6.1.4.1.52.1011.3.13.1 | Rowels100SwitchVlanEntry | not-accessible | mandatory | An entry in the VLAN configuration table. |
| 1.3.6.1.4.1.52.1011.3.13.1.1 | Columnels100SwitchVlanId | read-write | mandatory | The number of the VLAN, from 1 to the number of VLAN's supported on the system. |
| 1.3.6.1.4.1.52.1011.3.13.1.2 | Columnels100SwitchVlanName | read-write | mandatory | A descriptive string of up to 60 characters used by the network administrator to name the VLAN. |
| 1.3.6.1.4.1.52.1011.3.13.1.3 | Columnels100SwitchVlanPorts | read-write | mandatory | The set of ports in the VLAN. For systems supporting tagged VLAN's, these are the ports to which packets on the VLAN are sent untagged. Each octet within the v… |
| 1.3.6.1.4.1.52.1011.3.13.1.4 | Columnels100SwitchVlanEgressPorts | read-write | mandatory | The set of ports defined to be on other VLAN's to which tagged packets destined for this specific VLAN should also be sent. Thus, this variable defines ports o… |
| 1.3.6.1.4.1.52.1011.3.13.1.5 | Columnels100SwitchVlanStatus | read-write | mandatory | Control variable used to enable or disable the operation of the associated VLAN in the system. |
| 1.3.6.1.4.1.52.1011.3.14 | Tableels100SwitchVlanPortTable | not-accessible | mandatory | The VLAN port configuration table. |
| 1.3.6.1.4.1.52.1011.3.14.1 | Rowels100SwitchVlanPortEntry | not-accessible | mandatory | An entry in the VLAN port configuration table. |
| 1.3.6.1.4.1.52.1011.3.14.1.1 | Columnels100SwitchVlanPortId | read-only | mandatory | The number of the port, from 1 to number of ports in the system. |
| 1.3.6.1.4.1.52.1011.3.14.1.2 | Columnels100SwitchVlanPvid | read-write | mandatory | The port's VLAN ID. For tagged VLAN's, this variable defines a 12 bit port VLAN ID (PVID) used as the identifier of the VLAN in the packet tag. |
| 1.3.6.1.4.1.52.1011.3.14.1.3 | Columnels100SwitchVlanPortType | read-write | mandatory | For tagged VLAN's, the VLAN port type, either hybrid or access. Hybrid ports allow both tagged and untagged packets to enter the switch. Access ports only acce… |
| 1.3.6.1.4.1.52.1011.3.15 | Scalarels100SwitchPriorityEnable | read-write | mandatory | Globally enable or disable the Class of Service traffic priority mechanism for the system. |
| 1.3.6.1.4.1.52.1011.3.16 | Scalarels100SwitchPriorityThreshold | read-write | mandatory | The global priority threshold level for the system at which VLAN tagged frames entering the associated port are assigned a high priority. This variable can hav… |
| 1.3.6.1.4.1.52.1011.3.17 | Tableels100SwitchPriorityPortTable | not-accessible | mandatory | The priority port table. |
| 1.3.6.1.4.1.52.1011.3.17.1 | Rowels100SwitchPriorityPortEntry | not-accessible | mandatory | An entry in the port priority table. |
| 1.3.6.1.4.1.52.1011.3.17.1.1 | Columnels100SwitchPriorityPortId | read-only | mandatory | The port number, from 1 to number of ports in the system. |
| 1.3.6.1.4.1.52.1011.3.17.1.2 | Columnels100SwitchPriorityDefault | read-write | mandatory | The port priority level assigned to untagged traffic entering the associated port. This variable can have a value in the range (0...7). This value is compared … |
| 1.3.6.1.4.1.52.1011.3.18 | Scalarels100SwitchSpanningTreeStandby | read-write | mandatory | Globally enable or disable Spanning Tree Standby. If set to disable, every port will instanly enter forwarding mode after link up |