CTFPS-MIB
49 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-MIB-NAMES | ctFPS |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.11.2.1 | NodefpsSystem | |||
| 1.3.6.1.4.1.52.4.1.2.11.2.1.1 | ScalarfpsSystemSlotNum | read-only | mandatory | The chassis slot of this FPS system. |
| 1.3.6.1.4.1.52.4.1.2.11.2.1.2 | ScalarfpsSystemMode | read-only | mandatory | The current operation mode of the FPS. |
| 1.3.6.1.4.1.52.4.1.2.11.2.1.3 | ScalarfpsMaxPktRam | read-only | mandatory | The maximum number of packet buffers supported by the system. |
| 1.3.6.1.4.1.52.4.1.2.11.2.1.4 | ScalarfpsFreePktRam | read-only | mandatory | The number of packet buffers currently free in the system. |
| 1.3.6.1.4.1.52.4.1.2.11.2.1.5 | ScalarfpsOperTime | read-only | mandatory | Indicates the amount of time the FPS has been operational. |
| 1.3.6.1.4.1.52.4.1.2.11.2.1.6 | ScalarfpsInPkts | read-only | mandatory | The number of packets received by the FPS since the last time the FPS became operational. |
| 1.3.6.1.4.1.52.4.1.2.11.2.1.7 | ScalarfpsOutPkts | read-only | mandatory | The number of packets forwarded by the FPS. |
| 1.3.6.1.4.1.52.4.1.2.11.2.1.8 | ScalarfpsInOctets | read-only | mandatory | The number of octets received by the FPS. |
| 1.3.6.1.4.1.52.4.1.2.11.2.1.9 | ScalarfpsOutOctets | read-only | mandatory | The number of octets forwarded by the FPS. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2 | NodefpsPort | |||
| 1.3.6.1.4.1.52.4.1.2.11.2.2.1 | ScalarfpsActivePorts | read-only | mandatory | The number of active FPS ports. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.2 | ScalarfpsMaxPortNum | read-only | mandatory | The maximum number of ports that this FPS system can support. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3 | TablefpsPortTable | not-accessible | mandatory | A list of status and configuration information on active FPS ports in the system |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1 | RowfpsPortEntry | not-accessible | mandatory | A collection of fps port status and configurations. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.1 | ColumnfpsPortNum | read-only | mandatory | FPS port number. A unique value in the range between 1 and fpsActivePorts. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.2 | ColumnfpsPortIfNum | read-only | mandatory | This object uniquely identifies the interface associated with the FPS port. This interface number is the same as the MIBII interface number, ifIndex, defined i… |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.3 | ColumnfpsPortType | read-only | mandatory | Media type of this FPS port. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.4 | ColumnfpsPortClusterNum | read-only | mandatory | FPS cluster associated with this FPS port. Cluster numbers are used to allocate FPS bandwidth for this port. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.5 | ColumnfpsPortTotalAvailQueDepth | read-only | mandatory | Que depth assigned to this FPS port's queue. This number represents the hardware limit for the queue and can be no greater than fpsPortMaxQueDepth for this FPS… |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.6 | ColumnfpsPortMaxQueDepth | read-only | mandatory | Maximum depth this queue can be set to for this FPS port. This number may be equal or less than the hardware limit. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.7 | ColumnfpsPortCurrentQueDepth | read-only | mandatory | The actual queue depth on this FPS port. This value is from (fpsPortTotalAvailQueDepth - the number of queue entries on the queue at any one time). |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.8 | ColumnfpsPortBandwidthRequested | read-only | mandatory | Amount of bandwidth (in Mb/s) that this port is requesting from the FPS |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.9 | ColumnfpsPortBandwidthAllocated | read-only | mandatory | Estimate of the actual bandwidth this port is receiving (in Mb/s) from the FPS. This value may be lower or higher than the required bandwidth. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.10 | ColumnfpsPortXmitStatus | read-only | mandatory | Current state of this port's transmit enable bit in the Transmit Enable Register (LUFW). |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.11 | ColumnfpsPortFwdStatus | read-only | mandatory | Current state of this port's forward enable bit in the Forward Enable Register (LUFW). If enabled, the FPS will allow packets received on this port to be forwa… |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.12 | ColumnfpsPortLearningStatus | read-only | mandatory | Current state of this port's bit in the Learn Enable Mask (LUFW). If enabled the FPS will allow dynamic learning on frames received on this port. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.13 | ColumnfpsPortUnknownStatus | read-only | mandatory | Current state of this port's bit in the Unkown Mask (LUFW). If enabled the FPS will forward packets that are unknown to this port. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.14 | ColumnfpsPortBroadcastStatus | read-only | mandatory | Current state of this port's bit in the Broadcast Mask (LUFW). If enabled the FPS will forward broadcast packets to this port. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.15 | ColumnfpsPortViolationStatus | read-only | mandatory | Current state of this port's bit in the Violation Mask (LUFW). If enabled the FPS will forward packets that are in violation to this port. Note: This value is … |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.16 | ColumnfpsPortCopyStatus | read-only | mandatory | Current state of this port's bit in the Copy Mask (LUFW). If enabled the FPS will copy packets to this port whose BAF entry has the 'copyl' bit set. |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.17 | ColumnfpsPortStatsStatus | read-only | mandatory | Current state of this port's bit in the Statistics Mask (LUFW). If enabled the FPS will collect statistics on this port. These stats are found in the system ta… |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.18 | ColumnfpsPortSpecialPortsSMT | read-only | mandatory | This object represents whether or not this port has been selected to receive SMT multicast and broadcast frames |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.19 | ColumnfpsPortSpecialPortsHost | read-only | mandatory | This object represents whether or not this port has been selected to receive to-host frames |
| 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.20 | ColumnfpsPortSpecialPortsError | read-only | mandatory | This object represents whether or not this port has been selected to receive errored frames |
| 1.3.6.1.4.1.52.4.1.2.11.2.3 | NodefpsCluster | |||
| 1.3.6.1.4.1.52.4.1.2.11.2.3.1 | ScalarfpsActiveClusters | read-only | mandatory | Number of valid FPS clusters in the system. |
| 1.3.6.1.4.1.52.4.1.2.11.2.3.2 | TablefpsClusterTable | not-accessible | mandatory | A list of fps cluster entries |
| 1.3.6.1.4.1.52.4.1.2.11.2.3.2.1 | RowfpsClusterEntry | not-accessible | mandatory | A collection of fps cluster entries. |
| 1.3.6.1.4.1.52.4.1.2.11.2.3.2.1.1 | ColumnfpsClusterNumber | read-only | mandatory | The value of this object uniquely identifies the cluster table entry. Cluster numbers are mapped to FPS ports for bandwidth allocation. |
| 1.3.6.1.4.1.52.4.1.2.11.2.3.2.1.2 | ColumnfpsClusterType | read-only | mandatory | Media type of the FPS port that is attached to this cluster number. |
| 1.3.6.1.4.1.52.4.1.2.11.2.3.2.1.3 | ColumnfpsClusterRoundRobin | read-write | mandatory | Whether a cluster is signed up for RoundRobin arbitration or not. Round Robin clusters will be given unused time slices. |
| 1.3.6.1.4.1.52.4.1.2.11.2.3.2.1.4 | ColumnfpsPortsPerCluster | read-only | mandatory | Number of FPS ports that share this cluster number for FPS bandwidth. |
| 1.3.6.1.4.1.52.4.1.2.11.2.4 | NodefpsDMAF | |||
| 1.3.6.1.4.1.52.4.1.2.11.2.4.1 | ScalardmafBandWidth3SecUtil | read-only | mandatory | Estimate of total FPS bandwidth utilized over the last three seconds as a function of DMAFTimeSlices. The counter represents hundreths of percent utilization. … |
| 1.3.6.1.4.1.52.4.1.2.11.2.5 | NodefpsBAF | |||
| 1.3.6.1.4.1.52.4.1.2.11.2.5.1 | ScalarbafEntryCount | read-only | mandatory | The number of entries currently used in this BAF. This number shall include static as well as dynamic entries |
| 1.3.6.1.4.1.52.4.1.2.11.2.5.2 | ScalarbafMaxEntry | read-only | mandatory | The maximum number of entries this BAF can hold per hardware. This includes static as well as dynamic entries |
| 1.3.6.1.4.1.52.4.1.2.11.2.5.3 | Scalarbaf3SecUtil | read-only | mandatory | Percentage of time that the BAF was utilized over the last three seconds. The Counter represents hundreths of percent. For example a value of 20 would represen… |