CTRON-APPN-MIB
271 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter TimeTicks |
| RFC1213-MIB | DisplayString |
| ROUTER-OIDS | nwRtrProtoSuites |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.5 | NodenwAppnRouter | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.1 | NodenwAppnMibs | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.1.1 | ScalarnwAppnMibRevText | read-only | mandatory | Indicates the current revision level of the Cabletron APPN Router MIB in textual format. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2 | NodenwAppnComponents | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1 | NodenwAppnSystem | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1 | NodenwAppnSysConfig | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.1 | ScalarnwAppnSysRouterId | read-write | mandatory | Specifies the APPN Fully-Qualified Control Point name that is used to uniquely identify APPN Routing Services in an APPN network. The name format is NNNNNNNN.C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2 | NodenwAppnSysCfgLocalNode | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.1 | ScalarnwAppnSysNodeType | read-only | mandatory | Indicates the node type supported by APPN Routing Services which is always of type Network Node. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.2 | ScalarnwAppnSysCpAlias | read-write | mandatory | Specifies the Control Point alias name used by APPN Routing Services. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.3 | ScalarnwAppnSysModeCosMap | read-write | mandatory | Specifies whether mode to COS mapping is supported by APPN Routing Services. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.4 | ScalarnwAppnSysMdsSupport | read-write | mandatory | Specifies whether Management Services supports Multiple Domain Support and Management Services capabilities. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.6 | ScalarnwAppnSysMaxLocates | read-write | mandatory | Specifies maximum Number of locate requests that APPN Routing Services can concurrently process. Note: if nwAppnSysMaxLocates is set to a value too small, it w… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.7 | ScalarnwAppnSysDirCacheSize | read-write | mandatory | Specifies number of located resources maintained in the Directory Cache. Note: if nwAppnSysDirCacheSize is set to a value too small, it will be internally incr… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.8 | ScalarnwAppnSysMaxDirEntries | read-write | mandatory | Specifies maximum number of directory entries. If zero is selected, the number of entries is unlimited. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.9 | ScalarnwAppnSysLocateTimeout | read-write | mandatory | Specifies time in seconds before a network search will timeout. Zero indicates that the search has no timeout. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.10 | ScalarnwAppnSysRegCds | read-write | mandatory | Specifies whether the local or domain resources can be registered with the Central Directory Server. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.11 | ScalarnwAppnSysMdsSendQSize | read-write | mandatory | Specifies size of the MDS send alert Queue. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.12 | ScalarnwAppnSysCosSize | read-write | mandatory | Specifies maximum number of COS definitions maintained in the COS database weights cache. It determines the size of the COS Database weights cache. Note: if nw… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.13 | ScalarnwAppnSysTreeSize | read-write | mandatory | Specifies the number of routes maintained in the Topology Database routing tree cache. Note: if nwAppnSysTreeSize is set to a value too small, it will be inter… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.14 | ScalarnwAppnSysTreeUseLimit | read-write | mandatory | Maximum number of times a cached tree will be used to compute a route before the tree is discarded and recomputed. This allows the APPN Routing Services to bal… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.15 | ScalarnwAppnSysMaxTdmNodes | read-write | mandatory | Specifies maximum number of nodes that can be stored in the Topology Database. Zero means unlimited. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.16 | ScalarnwAppnSysMaxTdmTGs | read-write | mandatory | Specifies maximum number of transmission groups that can be stored in Topology Database. Zero means unlimited. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.18 | ScalarnwAppnSysMaxIsrSessions | read-write | mandatory | Specifies maximum number of intermediate routing sessions permitted by APPN Routing Services at one time. This must be a non-negative number. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.19 | ScalarnwAppnSysIsrUpperThresh | read-write | mandatory | The thresholds control the congestion status of APPN routing services. If the number of ISR sessions exceeds the upper threshold, congestion status changes fro… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.20 | ScalarnwAppnSysIsrLowerThresh | read-write | mandatory | Specifes the number of ISR sessions at which congestion status will revert to uncongested. This must be a non-negative number. nwAppnSysIsrLowerThresh must be … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.21 | ScalarnwAppnSysIsrMaxRuSize | read-write | mandatory | Specifies maximum RU size supported for intermediate sessions. Note: the number provided will be rounded up to the next valid RU size if necessary after APPN R… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.22 | ScalarnwAppnSysIsrRcvPaceWind | read-write | mandatory | Specifies suggested receive pacing window size for intermediate sessions. This value may be used as a fixed window size for fixed pacing, or as a tuning value … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.23 | ScalarnwAppnSysRtAddResist | read-write | mandatory | Specifies a desirability factor for APPN Routing Services to perform intermediate session routing. 255 is least desirable and 0 is more desirable. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.24 | ScalarnwAppnSysStopType | read-write | mandatory | Specifies the type of APPN Routing Services shutdown. Once specified, select disable from nwAppnSysAdminStatus. The shutdown choices are as follows: abort(1) A… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.25 | ScalarnwAppnSysBlockNum | read-write | mandatory | This represents the 3 hexadecimal digit block number which precedes the 5 digit id number in the 8 digit node id used in XIDs and Alerts. The block number iden… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.2.26 | ScalarnwAppnSysIdNum | read-write | mandatory | This represents the 5 hexadecimal digit id number which follows the 3 digit block number in the 8 digit node id used in XIDs and Alerts. The id number uniquely… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3 | NodenwAppnSysCfgTables | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1 | TablenwAppnSysLuTable | not-accessible | mandatory | This table contains entries for LUs that are owned by adjacent LEN nodes. Defining or deleting an entry is equivalent to defining or deleting an entry in the d… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1 | RownwAppnSysLuEntry | not-accessible | mandatory | Each entry defines an LU entry in the directory database. The fully qualified CP name and the name of the LU are the indexes into this table. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1.1 | ColumnnwAppnSysCpName | read-write | mandatory | Specifies the fully qualified name of the Control Point containing the LU being defined. The format of this name is NNNNNNNN.CCCCCCCC where NNNNNNNN is the net… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1.2 | ColumnnwAppnSysLuName | read-write | mandatory | Specifies the name of the LU being registered. The name format is LLLLLLLL where LLLLLLLL are the characters: uppercase letters A through Z, numerics 0 through… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1.3 | ColumnnwAppnSysLuControl | read-write | mandatory | Set this object to delete to remove an entry. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2 | NodenwAppnSysAdministration | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2.1 | ScalarnwAppnSysAdminStatus | read-write | mandatory | Sets the system-wide administrative state of APPN Routing Services. If enable(3) is selected, APPN Routing Services is activated. There are two cases: the very… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2.2 | ScalarnwAppnSysOperStatus | read-only | mandatory | Indicates the current operating system-wide status of APPN Routing Services. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2.3 | ScalarnwAppnSysAdminReset | read-write | mandatory | Resets APPN Routing Services system-wide. Reset (2) forces a restart of APPN Routing Services without a graceful shutdown on any active router ports, without a… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2.4 | ScalarnwAppnSysOperationalTime | read-only | mandatory | Indicates the elapsed time, in hundredths of a second, that nwAppnOperStatus has been in its current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2.5 | ScalarnwAppnSysVersion | read-only | mandatory | Indicates the current revision level of APPN routing services in textual format. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2 | NodenwAppnForwarding | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1 | NodenwAppnFwdSystem | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1 | NodenwAppnFwdCounters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.1 | ScalarnwAppnFwdCtrAdminStatus | read-write | mandatory | Sets the administrative state of the aggregate, system-wide, port Message Unit (MU) and byte counters. Enabled (3) causes these counters to become active. Disa… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.2 | ScalarnwAppnFwdCtrReset | read-write | mandatory | Resets the aggregate, system-wide port Message Unit (MU) and byte counters. Reset (2) resets the aggregate counters to 0. nwAppnFwdCtrOperationalTime is also r… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.3 | ScalarnwAppnFwdCtrOperationalTime | read-only | mandatory | Indicates the elapsed time, in hundredths of a second, that nwAppnFwdCtrAdminStatus has been in the current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.4 | ScalarnwAppnFwdCtrInMus | read-only | mandatory | Indicates the total number of Message Units (MU)s that have been received system-wide (for all ports) during nwAppnFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.5 | ScalarnwAppnFwdCtrOutMus | read-only | mandatory | Indicates the total number of Message Units (MU)s that have been transmitted system-wide (for all ports) during nwAppnFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.6 | ScalarnwAppnFwdCtrFwdMus | read-only | mandatory | Indicates the total number of Message Units (MU)s that have been forwarded system-wide (for all ports) during nwAppnFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.7 | ScalarnwAppnFwdCtrFilteredMus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.8 | ScalarnwAppnFwdCtrDiscardMus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.9 | ScalarnwAppnFwdCtrAddrErrMus | read-only | mandatory | Indicates the total number of Message Units (MUs) that have been received system-wide (for all ports), during nwAppnFwdCtrOperationalTime, that contain an addr… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.10 | ScalarnwAppnFwdCtrLenErrMus | read-only | mandatory | Indicates the total number of Message Units (MUs) that have been received system-wide (for all ports), during nwAppnFwdCtrOperationalTime, that contain a lengt… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.11 | ScalarnwAppnFwdCtrHdrErrMus | read-only | mandatory | Indicates the total number of Message Units (MUs) that have been received system-wide (for all ports), during nwAppnFwdCtrOperationalTime, that contain an SNA … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.12 | ScalarnwAppnFwdCtrInBytes | read-only | mandatory | Indicates number of bytes in Message Units (MUs) that have been received system-wide (for all ports), during nwAppnFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.13 | ScalarnwAppnFwdCtrOutBytes | read-only | mandatory | Indicates the total number of bytes in Message Units (MUs) that have been forwarded system-wide (for all ports), during nwAppnFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.14 | ScalarnwAppnFwdCtrFwdBytes | read-only | mandatory | Indicates the total number of bytes in Message Units (MUs) that have been forwarded system-wide (for all ports), during nwAppnFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.15 | ScalarnwAppnFwdCtrFilteredBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.16 | ScalarnwAppnFwdCtrDiscardBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.17 | ScalarnwAppnFwdCtrHostInMus | read-only | mandatory | Indicates the total number of Message Units (MUs) that have been delivered system-wide (for all ports), to local half sessions during nwAppnFwdCtrOperationalTi… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.18 | ScalarnwAppnFwdCtrHostOutMus | read-only | mandatory | Indicates the total number of Message Units (MUs) that have been successfully sent from local half sessions system-wide (for all ports), to Path Control during… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.19 | ScalarnwAppnFwdCtrHostDiscardMus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.20 | ScalarnwAppnFwdCtrHostInBytes | read-only | mandatory | Indicates the total number of bytes in Message Units (MUs) that have been delivered system-wide (for all ports), to local half sessions during nwAppnFwdCtrOper… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.21 | ScalarnwAppnFwdCtrHostOutBytes | read-only | mandatory | Indicates the total number of bytes in Message Units (MUs) that have been successfully sent from local half sessions system-wide (for all ports), to Path Contr… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.1.1.22 | ScalarnwAppnFwdCtrHostDiscardBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2 | NodenwAppnFwdInterfaces | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1 | NodenwAppnFwdIfConfig | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1 | TablenwAppnFwdIfTable | not-accessible | mandatory | This table contains an entry for each router port which can be used by APPN Routing Services. This table is indexed by nwAppnFwdIfIndex, which indicates the va… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1 | RownwAppnFwdIfEntry | not-accessible | mandatory | Each entry specifies the APPN Routing Services port configuration for the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.1 | ColumnnwAppnFwdIfIndex | read-only | mandatory | Indicates the value of MIB2 ifindex, which identifies the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.2 | ColumnnwAppnFwdIfAdminStatus | read-write | mandatory | Sets the administrative state of an APPN Routing Services port for which the entry exists. enabled(3) causes the APPN Routing Services port to become active. d… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.3 | ColumnnwAppnFwdIfOperStatus | read-only | mandatory | Indicates the current operating condition of the APPN Routing Services port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.4 | ColumnnwAppnFwdIfOperationalTime | read-only | mandatory | Indicates the elapsed time, in hundredths of a second, that nwAppnFwdIfOperStatus has been in the current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.5 | ColumnnwAppnFwdIfControl | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.6 | ColumnnwAppnFwdIfMtu | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.7 | ColumnnwAppnFwdIfForwarding | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.8 | ColumnnwAppnFwdIfFrameType | read-write | mandatory | Specifies the framing type for the APPN Routing Services port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.9 | ColumnnwAppnFwdIfAclIdentifier | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.10 | ColumnnwAppnFwdIfAclStatus | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.11 | ColumnnwAppnFwdIfCacheControl | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.12 | ColumnnwAppnFwdIfCacheEntries | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.13 | ColumnnwAppnFwdIfCacheHits | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.14 | ColumnnwAppnFwdIfCacheMisses | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2 | TablenwAppnExtensionTable | not-accessible | mandatory | This table contains additional APPN definitions for each physical port. Entries cannot be added to or deleted from this table. With the exception of nwAppnExtI… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1 | RownwAppnExtEntry | not-accessible | mandatory | Each entry specifies additional APPN configuration parameters for the port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.1 | ColumnnwAppnExtIfIndex | read-only | mandatory | Specifies the primary index into the APPN port extension table. This number corresponds to the index into the nwAppnFwdIfTable. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.2 | ColumnnwAppnExtIfPortName | read-only | mandatory | Specifies the user friendly name for this port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.4 | ColumnnwAppnExtIfPortType | read-write | mandatory | Specifies the type of line used by the port. The value corresponds to one of the following: nonswitched(1), switched(2), or satf(3). |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.5 | ColumnnwAppnExtIfDlcType | read-only | mandatory | Specifies the type of DLC using the port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.6 | ColumnnwAppnExtIfMaxRBtuSize | read-write | mandatory | Specifies the maximum Message Unit (MU) size that can be received. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.7 | ColumnnwAppnExtIfTotLsActLim | read-write | mandatory | Specifies the total number of links that can be active on this port. If nwAppnExtIfPortType = nonswitched(1) and nwAppnExtIfLocalLsRole = negotiable(1), or sec… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.8 | ColumnnwAppnExtIfInbLsActLim | read-write | mandatory | Specifies the total number of inbound links that can be active on this port. If nwAppnExtIfPortType = nonswitched(1) and nwAppnExtIfLocalLsRole = negotiable(1)… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.9 | ColumnnwAppnExtIfOutbLsActLim | read-write | mandatory | Specifies the total number of outbound links that can be active on this port. If nwAppnExtIfPortType = nonswitched(1) and nwAppnExtIfLocalLsRole = negotiable(1… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.10 | ColumnnwAppnExtIfLocalLsRole | read-write | mandatory | Specifies the link station role - primary, secondary, or negotiable. For nwAppnExtIfPortType = satf(3), the link station role must be negotiable(1). |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.11 | ColumnnwAppnExtIfActXidXchgLimit | read-write | mandatory | Specifies the total number of activation XIDs that may be exchanged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.12 | ColumnnwAppnExtIfNonActXidXchgLimit | read-write | mandatory | Specifies the total number of non-activation XIDs that may be exchanged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.13 | ColumnnwAppnExtIfLsXmitRcvCap | read-write | mandatory | Specifies the link station's transmit/receive capability. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.14 | ColumnnwAppnExtIfMaxIfrmRcvd | read-write | mandatory | Specifies the maximum number of I-frames received before an acknowledgment is sent to the sender. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.15 | ColumnnwAppnExtIfDfltTargetPacing | read-write | mandatory | Specifies the pacing window size for BINDs on this transmission group. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.16 | ColumnnwAppnExtIfDfltMaxSBtuSize | read-write | mandatory | Specifies the maximum Message Unit (MU) size which can be sent. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.17 | ColumnnwAppnExtIfDfltEffectCap | read-write | mandatory | Specifies the default maximum kilo bits per second rate (line speed) for all links on this port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.18 | ColumnnwAppnExtIfDfltConnectCost | read-write | mandatory | Specifies the default cost per connect time for all link stations on this port. 0 is the lowest cost and 255 is the largest cost. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.19 | ColumnnwAppnExtIfDfltByteCost | read-write | mandatory | Specifies the default Cost per Byte for link stations. 0 is the lowest cost and 255 is the largest cost. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.20 | ColumnnwAppnExtIfDfltSecurity | read-write | mandatory | Specify one of the following security selections: non-secure - specifies no security. public switched - data flows over a public switched network. underground … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.21 | ColumnnwAppnExtIfDfltPropDelay | read-write | mandatory | Specifies the propagation delay which represents the relative time it takes for a signal to travel the length of the link in microseconds, with some of the mor… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.22 | ColumnnwAppnExtIfDfltUsrDef1 | read-write | mandatory | Specifies user defined parameter 1. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.23 | ColumnnwAppnExtIfDfltUsrDef2 | read-write | mandatory | Specifies user defined parameter 2. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.24 | ColumnnwAppnExtIfDfltUsrDef3 | read-write | mandatory | Specifies user defined parameter 3. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.25 | ColumnnwAppnExtIfStopType | read-write | mandatory | Specifies the type of shutdown for APPN Routing Services on the port. Once set, nwAppnFwdIfAdminStatus may be set to disable. The disable choices are as follow… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.26 | ColumnnwAppnExtIfCpCpSupp | read-write | mandatory | Specifies whether CP-CP sessions are permitted on dynamic links generated on this port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.27 | ColumnnwAppnExtIfLimitedRsrc | read-write | mandatory | Specifies whether dynamic links generated on this port are a limited resource. A limited resource link will be deactivated when there are no sessions using the… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.28 | ColumnnwAppnExtIfAddress | read-only | mandatory | Specifies the physical address of this port depending on the media type. For token ring or ethernet ports, the information is the 6 byte MAC address which star… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.29 | ColumnnwAppnExtIfSsap | read-write | mandatory | For token ring or ethernet ports specifies the Source SAP Address of this port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3 | NodenwAppnIfCn | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.1 | TablenwAppnIfCnPortTable | not-accessible | mandatory | This table contains definitions for the Connection Network port table which defines which local ports can access a connection network. To add a row to the tabl… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.1.1 | RownwAppnIfCnPortEntry | not-accessible | mandatory | Specifies the APPN Connection Network port definitions. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.1.1.1 | ColumnnwAppnIfCnPtFqName | read-write | mandatory | Specifies the fully-qualified Name of the Virtual Routing Node. The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and CCCCCCCC is t… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.1.1.2 | ColumnnwAppnIfCnPtName | read-write | mandatory | Specifies one of the ports which can access this Connection Network. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.1.1.3 | ColumnnwAppnIfCnPtControl | read-write | mandatory | Set this object to delete to delete this port from this Connection Network. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2 | TablenwAppnIfCnTgCharTable | not-accessible | mandatory | This table contains the APPN definitions for a Connection Network's transmission group characteristics. Rows may be neither added nor deleted, only modified. R… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1 | RownwAppnIfCnTgCharEntry | not-accessible | mandatory | Specifies the APPN transmission group characteristics for the Connection Network. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.1 | ColumnnwAppnIfCnTgFqName | read-write | mandatory | Specifies the fully-qualified Name of the Virtual Routing Node. The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and CCCCCCCC is t… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.2 | ColumnnwAppnIfCnTgEffectCap | read-write | mandatory | Specifies the maximum kilo bits per second rate (link speed) for the connection network. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.3 | ColumnnwAppnIfCnTgConnectCost | read-write | mandatory | Specifies the cost per connect time for the Connection Network. 0 is the lowest cost and 255 is the largest cost. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.4 | ColumnnwAppnIfCnTgByteCost | read-write | mandatory | Specifies the cost per byte for the Connection Network. 0 is the lowest cost and 255 is the largest cost. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.5 | ColumnnwAppnIfCnTgSecurity | read-write | mandatory | For the Connection Network, specify one of the following security selections: non-secure - specifies no security. public switched - data flows over a public sw… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.6 | ColumnnwAppnIfCnTgPropDelay | read-write | mandatory | Specifies the propagation delay which represents the time it takes for a signal to travel the length of the link in microseconds, with some of the more common … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.7 | ColumnnwAppnIfCnTgUsrDef1 | read-write | mandatory | Specifies user defined parameter 1. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.8 | ColumnnwAppnIfCnTgUsrDef2 | read-write | mandatory | Specifies user defined parameter 2. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.9 | ColumnnwAppnIfCnTgUsrDef3 | read-write | mandatory | Specifies user defined parameter 3. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2 | NodenwAppnFwdIfCounters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1 | TablenwAppnFwdIfCtrTable | not-accessible | mandatory | This table contains the Message Unit (MU) and byte counters for each port configured and enabled for APPN Routing Services. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1 | RownwAppnFwdIfCtrEntry | not-accessible | mandatory | Each entry indicates Message Units (MU) and byte counts on the router port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.1 | ColumnnwAppnFwdIfCtrIfIndex | read-only | mandatory | Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. This is the primary index into the APPN per-port counter tab… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.2 | ColumnnwAppnFwdIfCtrAdminStatus | read-write | mandatory | Sets the administrative state of the per-port Message Unit (MU) and byte counters on the router port for which the entry exists. enabled(3) causes these counte… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.3 | ColumnnwAppnFwdIfCtrReset | read-write | mandatory | Resets the per-port Message Unit (MU) and byte counters on the router port for which this entry exists. reset (2) resets the counters to 0. nwAppnFwdIfCtrOpera… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.4 | ColumnnwAppnFwdIfCtrOperationalTime | read-only | mandatory | Indicates the amount of time in hundreths of a second that the per-port Message Unit (MU) and byte counters have been active on the APPN routing services port … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.5 | ColumnnwAppnFwdIfCtrInMus | read-only | mandatory | Indicates the total number of Message Units (MU)s that have been received, during nwAppnFwdIfCtrOperationaltime on the router port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.6 | ColumnnwAppnFwdIfCtrOutMus | read-only | mandatory | Indicates the total number of Message Units (MU)s that have been transmitted, during nwAppnFwdIfCtrOperationalTime, on the router port for which this entry exi… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.7 | ColumnnwAppnFwdIfCtrFwdMus | read-only | mandatory | Indicates the total number of Message Units (MU)s that have been forwarded during nwAppnFwdIfCtrOperationalTime on the router port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.8 | ColumnnwAppnFwdIfCtrFilteredMus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.9 | ColumnnwAppnFwdIfCtrDiscardMus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.10 | ColumnnwAppnFwdIfCtrAddrErrMus | read-only | mandatory | Indicates the total number of Message Units (MUs) that contain an address error in the SNA header that have been received during nwAppnFwdIfCtrOperationalTime … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.11 | ColumnnwAppnFwdIfCtrLenErrMus | read-only | mandatory | Indicates the total number of Message Units (MUs) that contain a length error that have been received during nwAppnFwdIfCtrOperationalTime on the router port f… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.12 | ColumnnwAppnFwdIfCtrHdrErrMus | read-only | mandatory | Indicates the total number of Message Units (MUs) that contain a header error other than an address or length error that have been received during nwAppnFwdIfC… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.13 | ColumnnwAppnFwdIfCtrInBytes | read-only | mandatory | Indicates the total number of bytes in the Message Units (MU)s that have been received, during nwAppnFwdIfCtrOperationalTime, on the router port for which the … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.14 | ColumnnwAppnFwdIfCtrOutBytes | read-only | mandatory | Indicates the total number of bytes in the Message Units (MU)s that have been transmitted, during nwAppnFwdIfCtrOperationalTime, on the router port for which t… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.15 | ColumnnwAppnFwdIfCtrFwdBytes | read-only | mandatory | Indicates the total number of bytes in Message Units (MU)s that have been forwarded during nwAppnFwdIfCtrOperationalTime on the router port for which this entr… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.16 | ColumnnwAppnFwdIfCtrFilteredBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.17 | ColumnnwAppnFwdIfCtrDiscardBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.18 | ColumnnwAppnFwdIfCtrHostInMus | read-only | mandatory | Indicates the total number of Message Units (MUs) that have been delivered to local half sessions during nwAppnFwdIfCtrOperationalTime on the router port for w… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.19 | ColumnnwAppnFwdIfCtrHostOutMus | read-only | mandatory | Indicates the total number of Message Units (MUs) that have been successfully sent from local half sessions to Path Control during nwAppnFwdIfCtrOperationalTim… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.20 | ColumnnwAppnFwdIfCtrHostDiscardMus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.21 | ColumnnwAppnFwdIfCtrHostInBytes | read-only | mandatory | Indicates the total number of bytes in Message Units (MUs) that have been delivered to local half sessions during nwAppnFwdIfCtrOperationalTime on the router p… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.22 | ColumnnwAppnFwdIfCtrHostOutBytes | read-only | mandatory | Indicates the total number of bytes in Message Units (MUs) that have been successfully sent from local half sessions to Path Control during nwAppnFwdIfCtrOpera… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.23 | ColumnnwAppnFwdIfCtrHostDiscardBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3 | NodenwAppnFwdLinks | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1 | NodenwAppnFwdLsConfig | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1 | TablenwAppnFwdLsTable | not-accessible | mandatory | This table contains the configuration and management information for links to adjacent link stations. This table is indexed by nwAppnFwdLsName. Operations whic… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1 | RownwAppnFwdLsEntry | not-accessible | mandatory | Specifies the configuration for a link to an adjacent link station for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.1 | ColumnnwAppnFwdLsName | read-write | mandatory | Specifies the primary index to the adjacent link station table (nwAppnFwdLsTable). |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.2 | ColumnnwAppnFwdLsAdminStatus | read-write | mandatory | Sets the administrative state of a link to an adjacent link station. enabled(3) causes the link to become established. disable(2) causes the link to terminate.… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.3 | ColumnnwAppnFwdLsOperStatus | read-only | mandatory | Specifies the current operating status of the link for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.4 | ColumnnwAppnFwdLsOperationalTime | read-only | mandatory | Specifies the elapsed time, in hundredths of a second, that nwAppnFwdLsAdminStatus has been either enabled or DISABLED. If the operational state is pending-dis… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.5 | ColumnnwAppnFwdLsControl | read-write | mandatory | Set this object to delete in order to delete the entry. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.6 | ColumnnwAppnFwdLsPortName | read-write | mandatory | This link station port name corresponds to the port name index into the the nwAppnExtensionTable which describes the router port on which the adjacent link sta… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.7 | ColumnnwAppnFwdLsAdjCpName | read-write | mandatory | Specifies the fully-qualified, 17 byte long, adjacent Control Point name. The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and CCC… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.8 | ColumnnwAppnFwdLsAdjCpType | read-write | mandatory | Specifies the adjacent node type. The following values are valid: endnode(1), networknode(2). endnode(1) includes both End Node and LEN node types. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.10 | ColumnnwAppnFwdLsAutoActSupport | read-write | mandatory | Specifies whether the link is automatically enabled when a session is activated over the link. It is an error to set this to yes(1) when nwAppnFwdLsCpCpSessSup… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.11 | ColumnnwAppnFwdLsLimitedRsrc | read-write | mandatory | Specifies whether this link is to be deactivated when there are no sessions using the link. If nwAppnFwdLsCpCpSessSupp is yes, however, the link will not be de… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.12 | ColumnnwAppnFwdLsSscpSession | read-write | mandatory | Requests a host system to initiate sessions between its SSCP and dependent LUs within APPN Routing Services. If set to yes, then nwAppnFwdLsPuName is required.… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.13 | ColumnnwAppnFwdLsPuName | read-write | mandatory | Specifies the name of the local PU if nwAppnFwdLsSscpSession is set to yes. Valid characters are uppercase A through Z and numerics 0 through 9. The name must … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.14 | ColumnnwAppnFwdLsBackLvlLenEN | read-write | mandatory | Specifies whether or not the adjacent node is a back level LEN Node. If so, specify the type of back level LEN node as follows: xid3(2) - supports XID-3 protoc… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.16 | ColumnnwAppnFwdLsCpCpSessSupp | read-write | mandatory | Specifies whether this link supports CP to CP sessions. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.17 | ColumnnwAppnFwdLsEffectCap | read-write | mandatory | Specifies th maximum kilo bits per second rate (link speed) for the link. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.18 | ColumnnwAppnFwdLsConnectCost | read-write | mandatory | Specifies the cost per connect time for the link. Zero is the lowest cost and 255 is the largest cost. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.19 | ColumnnwAppnFwdLsByteCost | read-write | mandatory | Specifies the cost per Byte for the link. Zero is the lowest cost and 255 is the largest cost. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.20 | ColumnnwAppnFwdLsSecurity | read-write | mandatory | Security selections available for the link are as follows: non-secure - specifies no security. public switched - data flows over a public switched network. und… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.21 | ColumnnwAppnFwdLsPropDelay | read-write | mandatory | Specifies the propagation delay which represents the relative time it takes for a signal to travel the length of the link in microseconds, with some of the mor… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.22 | ColumnnwAppnFwdLsUsrDef1 | read-write | mandatory | Specifies user defined parameter 1. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.23 | ColumnnwAppnFwdLsUsrDef2 | read-write | mandatory | Specifies user defined parameter 2. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.24 | ColumnnwAppnFwdLsUsrDef3 | read-write | mandatory | Specifies user defined parameter 3. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.25 | ColumnnwAppnFwdLsTrgtPacingCount | read-write | mandatory | Species the desired pacing window size for BINDs on this transmission group. The number is a value between 0 and 32767 and is significant only when fixed bind … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.26 | ColumnnwAppnFwdLsMaxSendBtu | read-write | mandatory | Specifies maximum Message Unit (MU) size that can be sent. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.27 | ColumnnwAppnFwdLsNumActiveSession | read-only | mandatory | Specifies total number of active sessions on this link. This includes both end point sessions and intermediate sessions. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.28 | ColumnnwAppnFwdLsdynamicLs | read-only | mandatory | Specifies whether this link station was dynamically allocated (yes(1)) or whether the link station was defined by the user (no(2)). |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.29 | ColumnnwAppnFwdLsStopType | read-write | mandatory | Specifies the type of shutdown for a link. Once selected, set disable in nwAppnFwdIfAdminStatus. The shutdown choices are as follows: immediate(1) causes the l… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.30 | ColumnnwAppnFwdLsPortNbr | read-only | mandatory | This link station port number corresponds to the index into the nwAppnFwdIfTable and the nwAppnExtensionTable, which together describe the port used by APPN Ro… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.31 | ColumnnwAppnFwdLsDestAddr | read-write | mandatory | Specifies the destination address of the adjacent link station depending on the media type. For token ring or ethernet ports, the information is the 6 byte Des… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.32 | ColumnnwAppnFwdLsDsap | read-write | mandatory | For a token ring or ethernet network, specifies the destination SAP address associated with the adjacent link station. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.33 | ColumnnwAppnFwdLsBlockNum | read-write | mandatory | This represents the 3 hexadecimal digit block number which precedes the 5 digit id number in the 8 digit node id of the adjacent node. The node id is used in X… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.34 | ColumnnwAppnFwdLsIdNum | read-write | mandatory | This represents the 5 hexadecimal digit id number which follows the 3 digit block number in the 8 digit node id of the adjacent node. The node id is used in XI… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2 | NodenwAppnFwdLsCounters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1 | TablenwAppnFwdLsCtrTable | not-accessible | mandatory | This table contains the Basic Link Unit (BLU) and byte counters for each configured adjacent link station. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1 | RownwAppnFwdLsCtrEntry | not-accessible | mandatory | Each entry indicates the Basic Link Unit (BLU) and byte count for the configured adjacent link station for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.1 | ColumnnwAppnFwdLsCtrLsName | read-only | mandatory | Specifies the primary index into the link station counter table. This index is the link station name. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.2 | ColumnnwAppnFwdLsCtrAdminStatus | read-write | mandatory | Sets the administrative state of the Basic Link Unit (BLU) and byte counters on the link for which this entry exists. enabled(3) causes these counters to reset… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.3 | ColumnnwAppnFwdLsCtrReset | read-write | mandatory | Resets the Basic Link Unit (BLU) and byte counters on the link for which this entry exists. reset(2) resets the counters to 0. nwAppnFwdLsCtrOperationalTime is… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.4 | ColumnnwAppnFwdLsCtrOperationalTime | read-only | mandatory | Specifies the amount of time in hundreths of a second that the Basic Link Unit (BLU) and byte counters have been active on the link for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.5 | ColumnnwAppnFwdLsCtrInBlus | read-only | mandatory | Specifies the total number of Basic Link Unit (BLU)s that have been received, during nwAppnFwdLsCtrOperationaltime, on the link for which this entry exists. Th… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.6 | ColumnnwAppnFwdLsCtrOutBlus | read-only | mandatory | Specifies the total number of Basic Link Unit (BLU)s that have been transmitted, during nwAppnFwdLsCtrOperationalTime, on the link for which this entry exists.… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.7 | ColumnnwAppnFwdLsCtrFwdBlus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.8 | ColumnnwAppnFwdLsCtrFilteredBlus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.9 | ColumnnwAppnFwdLsCtrDiscardBlus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.10 | ColumnnwAppnFwdLsCtrAddrErrBlus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.11 | ColumnnwAppnFwdLsCtrLenErrBlus | read-only | mandatory | Specifies the total number of received Basic Link Unit (BLU)s during nwAppnFwdLsCtrOperationalTime which have invalid DLC headers on the link for which this en… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.12 | ColumnnwAppnFwdLsCtrHdrErrBlus | read-only | mandatory | Specifies the total number of received Basic Link Unit (BLU)s during nwAppnFwdLsCtrOperationalTime which have length errors on the link for which this entry ex… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.13 | ColumnnwAppnFwdLsCtrInBytes | read-only | mandatory | Specifies the total number of bytes that have been received, during nwAppnFwdLsCtrOperationalTime, on the link for which the entry exists. This includes bytes … |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.14 | ColumnnwAppnFwdLsCtrOutBytes | read-only | mandatory | Specifies the total number of bytes that have been transmitted, during nwAppnFwdLsCtrOperationalTime, on the link for which the entry exists. This includes byt… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.15 | ColumnnwAppnFwdLsCtrFwdBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.16 | ColumnnwAppnFwdLsCtrFilteredBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.17 | ColumnnwAppnFwdLsCtrDiscardBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.18 | ColumnnwAppnFwdLsCtrHostInBlus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.19 | ColumnnwAppnFwdLsCtrHostOutBlus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.20 | ColumnnwAppnFwdLsCtrHostDiscardBlus | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.21 | ColumnnwAppnFwdLsCtrHostInBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.22 | ColumnnwAppnFwdLsCtrHostOutBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.23 | ColumnnwAppnFwdLsCtrHostDiscardBytes | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4 | NodenwAppnTopology | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.1 | NodenwAppnDistanceVector | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2 | NodenwAppnLinkState | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1 | NodenwAppnIsr | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.1 | NodenwAppnIsrSystem | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.1.1 | NodenwAppnIsrConfig | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.1.1.1 | ScalarnwAppnIsrAdminStatus | read-write | mandatory | Intermediate Session Routing cannot be turned on and off. Any modifications to this leaf will have no affect. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.1.1.2 | ScalarnwAppnIsrOperStatus | read-only | mandatory | Specifies the current operating condition of the ISR routing protocol, system-wide. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.1.1.3 | ScalarnwAppnIsrAdminReset | read-only | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.1.1.4 | ScalarnwAppnIsrOperationalTime | read-only | mandatory | Indicates the elapsed time, in hundredths of a second, that nwAppnOperStatus has been in its current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.1.1.5 | ScalarnwAppnIsrVersion | read-only | mandatory | Indicates the current revision level of the ISR firmware in textual format. This is the same version number as that of APPN Routing Services firmware, nwAppnSy… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.1.2 | NodenwAppnIsrCounters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.2 | NodenwAppnIsrInterfaces | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.2.1 | NodenwAppnIsrIfConfig | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.2.2 | NodenwAppnIsrIfCounters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.3 | NodenwAppnIsrDatabase | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.4.2.1.4 | NodenwAppnIsrFilters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.5 | NodenwAppnFib | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.6 | NodenwAppnEndSystems | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.6.1 | NodenwAppnHostsSystem | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.6.2 | NodenwAppnHostsInterfaces | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.7 | NodenwAppnAccessControl | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.8 | NodenwAppnFilters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.9 | NodenwAppnRedirector | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10 | NodenwAppnEvent | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.1 | NodenwAppnEventLogConfig | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.1.1 | ScalarnwAppnEventAdminStatus | read-write | mandatory | Set the administrative state of APPN Routing Services event logging. enabled(3) causes the event log to become active. disabled(2) causes the event log to beco… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.1.2 | ScalarnwAppnEventMaxEntries | read-write | mandatory | Sets the maximum number of entries allowed in the event log table. When the number of entries reaches the value of nwAppnEventMaxEntries the first (oldest) ent… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.1.3 | ScalarnwAppnEventTraceAll | read-write | mandatory | enabled(3) allows logging of all event types on all ports. disabled(2) causes the filter table to specify which events to log. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2 | NodenwAppnEventLogFilterTable | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1 | TablenwAppnEventFilterTable | not-accessible | mandatory | This table contains descriptions of how to filter log entries. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1 | RownwAppnEventFilterEntry | not-accessible | mandatory | Each entry specifies the filter for log entries. The instance nwAppnEventProtocol refers to the instance used in the nwRtgProtocolTable and nwComponentTable sp… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.1 | ColumnnwAppnEventFltrProtocol | read-only | mandatory | Selects the protocol to log events from. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.2 | ColumnnwAppnEventFltrIfNum | read-only | mandatory | Specifies the APPN Routing Services port on which to log events. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.3 | ColumnnwAppnEventFltrControl | read-write | mandatory | Setting this field to delete will allow entries to be removed from the table. This is done by adding new entries with instance fields that match the entry to b… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.4 | ColumnnwAppnEventFltrType | read-write | mandatory | This bit field mask filter will allow only events of certain types to be logged. By default all types will be logged. Clearing event types from this field will… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.5 | ColumnnwAppnEventFltrSeverity | read-write | mandatory | This filter controls the amount of logging by ignoring events of lower priority than that specified by the filter value. Specifying highest(1) causes all event… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.6 | ColumnnwAppnEventFltrAction | read-write | mandatory | This field specifies how the events are to be logged. Specifying log(1) stores the events in the event log table (defined below). Specifying trap(2) sends even… |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3 | NodenwAppnEventLogTable | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1 | TablenwAppnEventTable | not-accessible | mandatory | This table contains all events that have been logged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1 | RownwAppnEventEntry | not-accessible | mandatory | Each entry specifies events that have been logged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.1 | ColumnnwAppnEventNumber | read-only | mandatory | This ordinal number uniquely identifies events. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.2 | ColumnnwAppnEventTime | read-only | mandatory | This number specifies when the event was logged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.3 | ColumnnwAppnEventType | read-only | mandatory | Specifies type of event logged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.4 | ColumnnwAppnEventSeverity | read-only | mandatory | Specifies the severity of the event logged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.5 | ColumnnwAppnEventProtocol | read-only | mandatory | Specifies the protocol where the event occured. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.6 | ColumnnwAppnEventIfNum | read-only | mandatory | Specifies the APPN Routing Services port the event occurred on. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.7 | ColumnnwAppnEventTextString | read-only | mandatory | Specifies the actual text string to be logged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.11 | NodenwAppnWorkGroup |