CTRON-AppleTalk-ROUTER-MIB
276 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| ROUTER-OIDS | nwRouter nwRtrProtoSuites |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.4 | NodenwAtRouter | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.1 | NodenwAtMibs | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.1.1 | ScalarnwAtMibRevText | read-only | mandatory | Indicates the current revision level of the Cabletron at Routing Services MIB in textual format. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2 | NodenwAtComponents | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1 | NodenwAtSystem | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.1 | NodenwAtSysConfig | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.1.1 | ScalarnwAtSysRouterId | read-write | mandatory | The AppleTalk node address used to uniquely identify the host (device) running the AppleTalk Routing Services. The value of nwAtSysRouterId is equal to the hig… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2 | NodenwAtSysAdministration | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.1 | ScalarnwAtSysAdminSTATUS | read-write | mandatory | Sets the administrative state of AppleTalk Routing Services system wide. Enabled (3) causes AppleTalk Routing Services to become active on all router ports con… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.2 | ScalarnwAtSysOperSTATUS | read-only | mandatory | Indicates the operating condition of AppleTalk Routing Services system- wide. The value of nwAtSysOperStatus indicates any problem with your AppleTalk Routing … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.3 | ScalarnwAtSysAdminReset | read-write | mandatory | Resets AppleTalk Routing Services system-wide. Reset (2) forces a restart of AppleTalk Routing Services without a graceful shutdown on any active router ports … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.4 | ScalarnwAtSysOperationalTime | read-only | mandatory | Indicates the elapsed time, in hundredths of a second, that nwAtSysOperStatus has been in its current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.2.5 | ScalarnwAtSysVersion | read-only | mandatory | Indicates the current revision level of the AppleTalk Routing Services firmware, in textual format. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2 | NodenwAtForwarding | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1 | NodenwAtFwdSystem | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1 | NodenwAtFwdCounters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.1 | ScalarnwAtFwdCtrAdminSTATUS | read-write | mandatory | Sets the administrative state of the aggregate (system-wide) AppleTalk packet and byte counters. Enabled (3) causes these counters to become active. Disabled (… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.2 | ScalarnwAtFwdCtrReset | read-write | mandatory | Reset(2) resets the aggregate (system-wide) AppleTalk packet and byte counters. Reset (2) resets the AppleTalk aggregate counters to 0.nwAtFwdCtrOperationalTim… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.3 | ScalarnwAtFwdCtrOperationalTime | read-only | mandatory | Indicates the elapsed time, in hundredths of a second, that nwAtFwdCtrAdminStatus has been in the current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.4 | ScalarnwAtFwdCtrInPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been received, system-wide, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.5 | ScalarnwAtFwdCtrOutPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been transmitted, system-wide, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.6 | ScalarnwAtFwdCtrFwdPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been forwarded, system-wide, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.7 | ScalarnwAtFwdCtrFilteredPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been administratively filtered, system-wide, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.8 | ScalarnwAtFwdCtrDiscardPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been discarded, system-wide, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.9 | ScalarnwAtFwdCtrAddrErrPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been discarded, system-wide, during nwAtFwdCtrOperationalTime because of addressing errors in the App… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.10 | ScalarnwAtFwdCtrLenErrPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been discarded, system-wide, during nwAtFwdCtrOperationalTime, because an invalid packet length is co… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.11 | ScalarnwAtFwdCtrHdrErrPkts | read-only | mandatory | Indicates the total number of at packets that have been discarded, device-wide, during nwAtFwdCtrOperationalTime, because of an invalid at header. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.12 | ScalarnwAtFwdCtrInBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been received, system-wide, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.13 | ScalarnwAtFwdCtrOutBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been transmitted, system-wide, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.14 | ScalarnwAtFwdCtrFwdBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been forwarded, system-wide, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.15 | ScalarnwAtFwdCtrFilteredBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, system-wide, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.16 | ScalarnwAtFwdCtrDiscardBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been discarded, system wide, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.17 | ScalarnwAtFwdCtrHostInPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been successfully delivered to the local host, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.18 | ScalarnwAtFwdCtrHostOutPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been transmitted by the local host, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.19 | ScalarnwAtFwdCtrHostDiscardPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been discarded by the local host, during nwAtFwdCtrOperationalTiime, due to a lack of host resources. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.20 | ScalarnwAtFwdCtrHostInBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been received by the local host, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.21 | ScalarnwAtFwdCtrHostOutBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been transmitted by the local host, during nwAtFwdCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.1.1.22 | ScalarnwAtFwdCtrHostDiscardBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been discarded by the local host, during nwAtFwdCtrOperationalTime, due to a lack of hos… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2 | NodenwAtFwdInterfaces | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1 | NodenwAtFwdIfConfig | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1 | TablenwAtFwdIfTable | not-accessible | mandatory | This table contains an entry for each router port. This table is indexed by nwAtFwdIfIndex, which indicates the value of MIB 2 ifindex, which identifies the ro… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1 | RownwAtFwdIfEntry | not-accessible | mandatory | Each entry specifies the AppeTalk Routing Services configuration for the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.1 | ColumnnwAtFwdIfIndex | read-only | mandatory | Indicates the value of the MIB 2 ifIndex, which identifies the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.2 | ColumnnwAtFwdIfAdminSTATUS | read-write | mandatory | Sets the administrative state of AppleTalk Routing Services on the router port for which the entry exists. Enabled (3) causes AppleTalk Routing Services to bec… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.3 | ColumnnwAtFwdIfOperSTATUS | read-only | mandatory | Indicates the current operating condition of AppleTalk Routing Services on the AppleTalk router port for which the entry exists. The value of nwAtFwdIfOperStat… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.4 | ColumnnwAtFwdIfOperationalTime | read-only | mandatory | Indicates the elapsed time, in hundredths of a second, that nwAtFwdIfOper Status has been in its current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.5 | ColumnnwAtFwdIfControl | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.6 | ColumnnwAtFwdIfMtu | read-write | mandatory | Specifies the Maximum Transmissions Unit (MTU) for AppleTalk packets on the router port for which the entry exists. This includes the AppleTalk header and data… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.7 | ColumnnwAtFwdIfForwarding | read-write | mandatory | Controls forwarding of AppleTalk packets on the AppleTalk router port for which the entry exists. Enabled (3) causes AppleTalk packets to be forwarded. Disable… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.8 | ColumnnwAtFwdIfFrameType | read-write | mandatory | Specifies the framing type for AppleTalk packets forwarded on the router port for which the entry exists. Some frame types are only valid for specific media ty… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.9 | ColumnnwAtFwdIfAclIdentifier | read-write | mandatory | Specifies the Access Control ID of the access control list in effect for AppleTalk packets being routed on the router port for which the entry exists. A value … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.10 | ColumnnwAtFwdIfAclSTATUS | read-write | mandatory | Controls the operation of any access control list configured for AppleTalk traffic on the router port for which the entry exists. Enabled (3) applies the acces… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.11 | ColumnnwAtFwdIfCacheControl | read-write | mandatory | Controls AppleTalk Address caching on the router port for which the entry exists. When AppleTalk Address caching is enabled, AppleTalk Addresses used for addre… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.12 | ColumnnwAtFwdIfCacheEntries | read-only | mandatory | Indicates the number of entries in the AppleTalk Address cache on the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.13 | ColumnnwAtFwdIfCacheHits | read-only | mandatory | Indicates the number of times entries in the AppleTalk Address cache have been used to provide the AppleTalk address required to validate, filter, or forward a… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.14 | ColumnnwAtFwdIfCacheMisses | read-only | mandatory | Indicates the number of times the AppleTalk Address required to validate, filter, or forward an AppleTalk packet on the router port was not found in the AppleT… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2 | TablenwAtportTable | not-accessible | mandatory | This table contains an entry for each router port configured for AppleTalk Routing Services. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1 | RownwAtportEntry | not-accessible | mandatory | Each entry specifies the AppleTalk address information for the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.1 | ColumnnwAtportIndex | read-only | mandatory | Indicates a unique value for each router port. The value of nwAtportIndex is an integer between 1 and the total number of ports configured for AppleTalk Routin… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.2 | ColumnnwAtportDescr | read-write | mandatory | This text string provides a description of the port to the end-user; it must not contain anything but printable ASCII characters. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.3 | ColumnnwAtportType | read-write | mandatory | The value of nwArPortType indicates which link-layer protocol is running immediately below DDP in the protocol stack on the router port for which the entry exi… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.4 | ColumnnwAtportNetStart | read-write | mandatory | The first AppleTalk network address in the network range configured for the port. If the port is not a native AppleTalk port, this object will have the value o… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.5 | ColumnnwAtportNetEnd | read-write | mandatory | The last AppleTalk network address in the network range configured for the port. If the network to which this AppleTalk port is connected is a non-extended net… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.6 | ColumnnwAtportNetAddress | read-write | mandatory | The AppleTalk node number configured for the port. This value may be used as a hint for an initial node number used during node-finding. If the port is not a n… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.7 | ColumnnwAtportSTATUS | read-write | mandatory | Indicates the current state of the router port's AppleTalk configuration. If either nwAtportNetConfig or nwApportZoneConfig are set to (5), conflictAverseSeed,… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.8 | ColumnnwAtportNetConfig | read-write | mandatory | Specifies the network configuration type of the port. If the port is not a native AppleTalk port, this object will have an unconfigured (4) value. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.9 | ColumnnwAtportZoneConfig | read-write | mandatory | Specifies the zone information configuration type of the port. If the port is not a native AppleTalk port, this object will have an unconfigured (4) value. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.10 | ColumnnwAtportZoneDefault | read-write | mandatory | Specifies the name of the default zone for the port. If the port only has one zone, that zone is represented here. If the port is not a native AppleTalk port, … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.11 | ColumnnwAtportIfIndex | read-write | mandatory | Indicates the value of MIB 2 ifIndex, which identifies the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.12 | ColumnnwAtportNetFrom | read-only | mandatory | When nwAtportNetConfig is set to garnered (2), this variable contains the DDP address of the entity from which the AppleTalk network number was garnered. When … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.13 | ColumnnwAtportZoneFrom | read-only | mandatory | When nwAtportZoneConfig is set to garnered (2), this variable contains the DDP address of the entity from which the AppleTalk Zone List was garnered. When nwAt… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.14 | ColumnnwAtportInPkts | read-only | mandatory | The total number of AppleTalk packets received on the port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.15 | ColumnnwAtportOutPkts | read-only | mandatory | The total number of AppleTalk packets transmitted on the port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.16 | ColumnnwAtportHome | read-only | mandatory | The value of nwAtportHome indicates whether or not the AppleTalk Routing Services-enabled device, the routing entity, is `homed' on the port for which the entr… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.17 | ColumnnwAtportCurrentZone | read-write | mandatory | Specifies the current zone name for the port. In general, this is the zone name in which services on the port will be registered. If the port is not a native A… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.2.1.18 | ColumnnwAtportConflictPhysAddr | read-only | mandatory | Indicates the link-layer address of the device which caused nwAtportStatus to be set to off (3). If this address is not available, or if nwAtportStatus is not … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2 | NodenwAtFwdIfCounters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1 | TablenwAtFwdIfCtrTable | not-accessible | mandatory | This table contains an entry for each router port configured and enabled for AppleTalk Routing Services. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1 | RownwAtFwdIfCtrEntry | not-accessible | mandatory | Each entry indicates the current packet and byte count of AppleTalk packets on the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.1 | ColumnnwAtFwdIfCtrIfIndex | read-only | mandatory | Indicates the value MIB 2 ifindex, which identifies the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.2 | ColumnnwAtFwdIfCtrAdminSTATUS | read-write | mandatory | Sets the administrative state of the per-port AppleTalk packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counte… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.3 | ColumnnwAtFwdIfCtrReset | read-write | mandatory | Resets the per-port AppleTalk packet and byte counters on the router port for which the entry exists. Reset (2) resets the counters to 0. nwAtFwdIfCtrOperation… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.4 | ColumnnwAtFwdIfCtrOperationalTime | read-only | mandatory | Indicates the amount of time, in hundredths of a second, that nwAtFwdIfCtrAdminStatus has been in the current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.5 | ColumnnwAtFwdIfCtrInPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been received, during nwAtFwdIfCtrOperationaltime, on the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.6 | ColumnnwAtFwdIfCtrOutPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been transmitted, during nwAtFwdIfCtrOperationaltime, on the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.7 | ColumnnwAtFwdIfCtrFwdPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been forwarded, during nwAtFwdIfCtrOperationaltime, on the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.8 | ColumnnwAtFwdIfCtrFilteredPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been administratively filtered, during nwAtFwdIfCtrOperationalTime, on the router port for which the … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.9 | ColumnnwAtFwdIfCtrDiscardPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been discarded (dropped), during nwAtFwdIfCtrOperationalTime, on the router port for which the entry … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.10 | ColumnnwAtFwdIfCtrAddrErrPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been discarded, because of addressing errors in the AppleTalk header, during nwAtFwdIfCtrOperationalT… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.11 | ColumnnwAtFwdIfCtrLenErrPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been discarded, because an invalid packet length was contained in the AppleTalk header, during nwAtFw… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.12 | ColumnnwAtFwdIfCtrHdrErrPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been discarded, because of an invalid AppleTalk header, during nwAtFwdIfCtrOperationalTime, on the ro… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.13 | ColumnnwAtFwdIfCtrInBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been received, during nwAtFwdIfCtrOperationalTime, on the router port for which the entr… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.14 | ColumnnwAtFwdIfCtrOutBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been transmitted, durin nwAtFwdIfCtrOperationalTime, on the router port for which the en… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.15 | ColumnnwAtFwdIfCtrFwdBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been forwarded, during nwAtFwdIfCtrOperationalTime, on the router port for which the ent… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.16 | ColumnnwAtFwdIfCtrFilteredBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, during nwAtFwdIfCtrOperationalTime, on the router port f… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.17 | ColumnnwAtFwdIfCtrDiscardBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been discarded, during nwAtFwdIfCtrOperationalTime, on the router port for which the ent… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.18 | ColumnnwAtFwdIfCtrHostInPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been successfully delivered to the local host during nwAtFwdIfCtrOperationalTime, that were received … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.19 | ColumnnwAtFwdIfCtrHostOutPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been transmitted by the local host, during nwAtFwdIfCtrOperationalTime, on the router port for which … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.20 | ColumnnwAtFwdIfCtrHostDiscardPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been discarded by the local host due to a lack of host resources during nwAtFwdIfCtrOperationalTime, … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.21 | ColumnnwAtFwdIfCtrHostInBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been successfully delivered to the local host, during nwAtFwdIfCtrOperationalTime, that … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.22 | ColumnnwAtFwdIfCtrHostOutBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been transmitted by the local host, during nwAtFwdIfCtrOperationalTime, on the router po… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.2.1.1.23 | ColumnnwAtFwdIfCtrHostDiscardBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been discarded by the local host, due to a lack of host resources during nwAtFwdIfCtrOpe… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4 | NodenwAtTopology | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1 | NodenwAtDistanceVector | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1 | NodenwAtProto | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1 | NodenwAtProtoSystem | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1 | NodenwAtProtoConfig | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.1 | ScalarnwAtProtoAdminSTATUS | read-write | mandatory | Sets the administrative state of the AppleTalk distance-vector based routing protocol system-wide. Enabled (3) causes the routing protocol to become active on … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.2 | ScalarnwAtProtoOperSTATUS | read-only | mandatory | Indicates the current operating condition of the AppleTalk Routing Services distance-vector-based routing protocol, system-wide. The value of nwAtProtoOperStat… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.3 | ScalarnwAtProtoAdminReset | read-write | mandatory | Resets the routing protocol. Reset (2) forces a system-wide restart of the protocol without a graceful shutdown on any active router ports. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.4 | ScalarnwAtProtoOperationalTime | read-only | mandatory | Indicates the elapsed time, in hundredths of a second, that nwAtProtoOperStatus has been in the current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.5 | ScalarnwAtProtoVersion | read-only | mandatory | Indicates the current revision level of the AppleTalk routing protocol firmware, in textual format. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.6 | ScalarnwAtProtoStackSize | read-write | mandatory | Specifies the stack size of the AppleTalk routing protocol thread. In order for a change of this value to take effect, the protocol (nwAtProtoAdminReset), Appl… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.7 | ScalarnwAtProtoThreadPriority | read-write | mandatory | Specifies the run-time execution priority of the AppleTalk routing protocol thread. In order for a change of this value to take effect, the AppleTalk protocol … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.8 | ScalarnwAtProtoDatabaseThreshold | read-write | mandatory | Specifies the run-time maximum number of entries that can be held in the AppleTalk routing protocol route table. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.9 | ScalarnwAtProtoAgeOut | read-write | mandatory | Specifies the amount of time (in seconds) an inactive entry will be allowed to remain in the AppleTalk routing protocol routing table, before it is deleted, or… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.10 | ScalarnwAtProtoHoldDown | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2 | NodenwAtProtoCounters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.1 | ScalarnwAtProtoCtrAdminSTATUS | read-write | mandatory | Sets the administrative state of the aggregate (system-wide) AppleTalk routing protocol packet and byte counters. Enabled (3)causes these counters to become ac… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.2 | ScalarnwAtProtoCtrReset | read-write | mandatory | Resets the aggregate (system-wide) AppleTalk distance-vector based routing protocol packet and byte counters. Reset (2) resets the AppleTalk aggregate counters… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.3 | ScalarnwAtProtoCtrOperationalTime | read-only | mandatory | Indicates the elapsed time, in hundreds of seconds, that nwAtProtoCtrAdminStatus, has been in the current administrative state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.4 | ScalarnwAtProtoCtrInPkts | read-only | mandatory | Indicates the total number of AppleTalk routing protocol packets that have been received, system-wide, during nwAtProtoCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.5 | ScalarnwAtProtoCtrOutPkts | read-only | mandatory | Indicates the total number of AppleTalk routing protocol packets that have been transmitted, system-wide, during nwAtProtoCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.6 | ScalarnwAtProtoCtrFilteredPkts | read-only | mandatory | Indicates the total number of AppleTalk routing protocol packets that have been administratively filtered, system-wide, during nwAtProtoCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.7 | ScalarnwAtProtoCtrDiscardPkts | read-only | mandatory | Indicates the total number of AppleTalk routing protocol packets that have been discarded, system-wide, during nwAtProtoCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.8 | ScalarnwAtProtoCtrInBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk routing protocol packets that have been received, system-wide, during nwAtProtoCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.9 | ScalarnwAtProtoCtrOutBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk routing protocol packets that have been transmitted, system-wide, during nwAtProtoCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.10 | ScalarnwAtProtoCtrFilteredBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk routing protocol packets that have been administratively filtered, system-wide, during nwAtProtoCtrOperati… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.2.11 | ScalarnwAtProtoCtrDiscardBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk routing protocol packets that have been discarded, system-wide during nwAtProtoCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2 | NodenwAtProtoInterface | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1 | NodenwAtProtoIfConfig | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1 | TablenwAtProtoIfTable | not-accessible | mandatory | This table contains an entry for each router port. Each entry can contain different values, allowing the routing protocol configuration to vary from router por… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1 | RownwAtProtoIfEntry | not-accessible | mandatory | Each entry contains the AppleTalk routing protocol configuration for the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.1 | ColumnnwAtProtoIfIndex | read-only | mandatory | Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.2 | ColumnnwAtProtoIfAdminSTATUS | read-write | mandatory | Sets the administrative state of the AppleTalk routing protocol on the router port for which the entry exists. Enabled (3) causes the routing protocol to becom… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.3 | ColumnnwAtProtoIfOperSTATUS | read-only | mandatory | Indicates the current operating condition of the AppleTalk routing protocol on the router port for which the entry exists. The value of nwAtProtoIfOperStatus i… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.4 | ColumnnwAtProtoIfOperationalTime | read-only | mandatory | Indicates the elapsed time, in hundreds of seconds, that nwAtProtoIfOperStatus has been in the current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.5 | ColumnnwAtProtoIfVersion | read-write | mandatory | Indicates the revision level of AppleTalk routing protocol firmware on the router port for which the entry exists, in textual format. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.6 | ColumnnwAtProtoIfAdvertisement | read-write | mandatory | This specifies the periodic interval (in seconds) that the AppleTalk routing protocol agent will advertise routes on this DECnet routing port. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.7 | ColumnnwAtProtoIfFloodDelay | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.8 | ColumnnwAtProtoIfRequestDelay | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.9 | ColumnnwAtProtoIfPriority | read-write | mandatory | Sets the priority of the AppleTalk routing protocol on the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.10 | ColumnnwAtProtoIfHelloTimer | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.11 | ColumnnwAtProtoIfSplitHorizon | read-write | mandatory | Sets the operating condition of Split Horizon on the router port for which the entry exists. When Split Horizon is enabled, the AppleTalk routing protocol keep… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.12 | ColumnnwAtProtoIfPoisonReverse | read-write | mandatory | Sets the operating condition of Poison Reverse on the router port for which the entry exists. When Poison Reverse is enabled, the AppleTalk routing protocol ad… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.13 | ColumnnwAtProtoIfSnooping | read-write | mandatory | Controls the operation of AppleTalk routing protocol Snooping on the router port. When AppleTalk routing protocol Snooping is enabled, the routing protocol ope… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.14 | ColumnnwAtProtoIfType | read-write | mandatory | Indicates whether the directly connected network segment does or does not support broadcast media access. If broadcast media access is supported, AppleTalk rou… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.15 | ColumnnwAtProtoIfXmitCost | read-write | mandatory | Sets the cost of transmitting a packet on the network segment connected to router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.16 | ColumnnwAtProtoIfAclIdentifier | read-write | mandatory | Specifies the Access Control List ID of the access control list in effect for AppleTalk routing protocol packets on the router port for which the entry exists.… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.17 | ColumnnwAtProtoIfAclSTATUS | read-write | mandatory | Controls the operation of the access control list identified by nwAtProtoIfAclIdentifier. Enabled (3) causes the access control list to be applied to all Apple… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2 | NodenwAtProtoIfCounters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1 | TablenwAtProtoIfCtrTable | not-accessible | mandatory | This table contains the AppleTalk packet and byte counters for each router port on this device. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1 | RownwAtProtoIfCtrEntry | not-accessible | mandatory | Each entry specifies the DECnet Phase IV packet and byte counters on a per router port basis. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.1 | ColumnnwAtProtoIfCtrIfIndex | read-only | mandatory | This is the primary index into the AppleTalk interface counter table. This number corresponds to the index into the mib2 InterfaceTable which describes the rou… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.2 | ColumnnwAtProtoIfCtrAdminSTATUS | read-write | mandatory | Sets the administrative state of the AppleTalk packet and byte counters on the router port for which the entry exists. enabled(3) causes these counters to beco… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.3 | ColumnnwAtProtoIfCtrReset | read-write | mandatory | Resets the AppleTalk packet and byte counters on the router port for which the entry exists. reset (2) resets the interface-specific counters to 0. nwAtProtoIf… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.4 | ColumnnwAtProtoIfCtrOperationalTime | read-only | mandatory | Indicates the amount of time (No. of time ticks) that the interface-specific AppleTalk packet and byte counters have been active on the router port for which t… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.5 | ColumnnwAtProtoIfCtrInPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been received, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.6 | ColumnnwAtProtoIfCtrOutPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.7 | ColumnnwAtProtoIfCtrFilteredPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been administratively filtered, on the router port for which this entry exists, during nwAtProtoIfCtr… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.8 | ColumnnwAtProtoIfCtrDiscardPkts | read-only | mandatory | Indicates the total number of AppleTalk packets that have been discarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.9 | ColumnnwAtProtoIfCtrInBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been received, on the router port for which the entry exists, during nwAtProtoIfCtrOpera… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.10 | ColumnnwAtProtoIfCtrOutBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOper… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.11 | ColumnnwAtProtoIfCtrFilteredBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, that were received on the router port for which the entr… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.12 | ColumnnwAtProtoIfCtrDiscardBytes | read-only | mandatory | Indicates the total number of bytes in the AppleTalk packets that have been discarded, that were received on the router port for which the entry exists, during… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.2 | NodenwAtLinkState | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5 | NodenwAtFib | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1 | TablenwAtFibTable | not-accessible | mandatory | This table contains an entry for each route being used to forward AppleTalk data packets. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1 | RownwAtFibEntry | not-accessible | mandatory | Each entry in the table describes an AppleTalk route to a particular destination. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.1 | ColumnnwAtFibStartNet | read-only | mandatory | Indicates the start of the network range for the route. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.2 | ColumnnwAtFibEndNet | read-only | mandatory | Indicates the end of the network range for the route. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.3 | ColumnnwAtFibNextHop | read-only | mandatory | Indicates the full AppleTalk network address of the next hop router for the route. An address of all zeros indicates a directly connected net. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.4 | ColumnnwAtFibNextHopIf | read-only | mandatory | Indicates the value of MIB 2 ifindex, which identifies the router port through which the next hop node exists. Packets destined for the network specified by th… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.5 | ColumnnwAtFibHops | read-only | mandatory | Indicates the number of hops required to reach the destination for which the entry exists. It is considered as metric 1. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.5.1.1.6 | ColumnnwAtFibRouteType | read-only | mandatory | Indicates the type of route (Allows for PPP entries later). |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6 | NodenwAtEndSystems | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1 | NodenwAtHostsSystem | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1.1 | ScalarnwAtHostsTimeToLive | read-only | mandatory | Indicates the amount of time (in minutes) that an entry can remain in the AARP cache. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.1.2 | ScalarnwAtHostsRetryCount | read-only | mandatory | Indicates the maximum number of times AppleTalk Routing Services will retry each attempt to resolve a host address. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2 | NodenwAtHostsInterfaces | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1 | TablenwAtHostCtlTable | not-accessible | mandatory | This table contains the control information for maintaining an AARP cache on each router port. Note that the cache entries are maintained by theAppleTalk Addre… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1 | RownwAtHostCtlEntry | not-accessible | mandatory | Each entry contains the control information for the ARP cache on the router port indicated by the value nwAtHostCtlIfIndex. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.1 | ColumnnwAtHostCtlIfIndex | read-only | mandatory | Indicates the value of MIB2 ifindex, which identifies the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.2 | ColumnnwAtHostCtlAdminSTATUS | read-write | mandatory | Sets the administrative state of the AARP cache on the router port for which the entry exists. Enabled (3) causes AARP caching to become active. Disabled (2) c… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.3 | ColumnnwAtHostCtlOperSTATUS | read-only | mandatory | Indicates the current operating condition of the AARP Table on the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.4 | ColumnnwAtHostCtlOperationalTime | read-only | mandatory | Indicates the amount of time, in hundredths of a second, that nwAtHostCtlOperStatus has been in the current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.5 | ColumnnwAtHostCtlProtocol | read-write | mandatory | Controls the operation of the AARP protocol on the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.6 | ColumnnwAtHostCtlSnooping | read-write | mandatory | Controls AARP Snooping on the router port for which the entry exists. Given the AARP protocol is enabled, setting nwAtHostCtlIfSnooping to enabled (3) turns on… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.7 | ColumnnwAtHostCtlProxy | read-write | mandatory | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the C… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.8 | ColumnnwAtHostCtlCacheMax | read-write | mandatory | Indicates the maximum number of entry slots the AARP cache can consist of. nwAtHostCtlCacheMax cannot be set to less than 16. Setting this value does not alloc… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.9 | ColumnnwAtHostCtlCacheSize | read-write | mandatory | Indicates the current number of entry slots in the AARP cache on the router port for which the entry exists. The cache automatically resizes to accommodate all… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.10 | ColumnnwAtHostCtlNumStatics | read-only | mandatory | Indicates the total number of static entries in the AARP cache on the router port for which the entry exists. Static entries remain in the cache until they are… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.11 | ColumnnwAtHostCtlNumDynamics | read-only | mandatory | Indicates the number of dynamic entries in the AARP cache on the router port for which the entry exists. Dynamic entries area added and aged out by the AARP pr… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.12 | ColumnnwAtHostCtlCacheHits | read-only | mandatory | Indicates the number of times an entry in the AARP cache has been used to successfully provide the physical address required to forward an AppleTalk packet on … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.2.1.1.13 | ColumnnwAtHostCtlCacheMisses | read-only | mandatory | Indicates the number of times the physical address required to forward an AppleTalk packet has not been found in the AARP cache on the router port for which th… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3 | NodenwAtHostsToMedia | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1 | TablenwAtHostMapTable | not-accessible | mandatory | The Ip Address translation table used for mapping an IP address to physical address, framing, port and circuit identifier, if applicable. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1 | RownwAtHostMapEntry | not-accessible | mandatory | Each entry contains one AtNetworkNumber to 'physical' address equivalence, including a circuit identifier if applicable. Also provided is the framing and port … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.1 | ColumnnwAtHostMapIfIndex | read-only | mandatory | This is the primary (major) index into the HostMap table. This number corresponds to the index into the MIB-2 Interfaces Group which describes the IP router po… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.2 | ColumnnwAtHostMapAtAddr | read-only | mandatory | The AtDdpNodeAddress corresponding to the media-dependent 'physical' address and circuit identifier (if applic). |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.3 | ColumnnwAtHostMapPhysAddr | read-write | mandatory | The media-dependent 'physical' address. The value of this object is 0 for entries indicating native-wan(8) framing. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.4 | ColumnnwAtHostMapType | read-write | mandatory | Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nwAtHostMapTable. That is, it effectively dissasociat… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.5 | ColumnnwAtHostMapCircuitID | read-write | mandatory | The identifier for the virtual circuit present on the interface. On an interface configured for Frame Relay, this number is the DLCI for the IP Address at the … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.6 | ColumnnwAtHostMapFraming | read-write | mandatory | Specifies the framing type required to converse with the host for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.6.3.1.1.7 | ColumnnwAtHostMapPortNumber | read-only | mandatory | The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of interfaces in the system… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7 | NodenwAtAccessControl | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.1 | ScalarnwAtAclValidEntries | read-only | mandatory | Indicates the number of valid entries that exist in the Access Control List Table. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2 | TablenwAtAclTable | not-accessible | mandatory | This table contains the Access Control List information for theAppleTalk protocol. This table contains entries, each of which allows packet forwarding between … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1 | RownwAtAclEntry | not-accessible | mandatory | Each entry contains AppleTalk source/destination access information. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.1 | ColumnnwAtAclIdentifier | read-only | mandatory | This is the primary (major) index into the AppleTalk access control list table. Essentially, this identifies the access control list by a unique identifier (at… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.2 | ColumnnwAtAclSequence | read-only | mandatory | This is the secondary (minor) index into the AppleTalk access control list table. This number corresponds to a sequence number used to order multiple entries w… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.3 | ColumnnwAtAclPermission | read-write | mandatory | Specifies whether access is allowed or denied between the source and destination address pairs. Note that source and destination are interchangeable when bi-di… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.4 | ColumnnwAtAclMatches | read-only | mandatory | Indicates the number of matches on this entry that have resulted in the access restriction permit/deny being applied as part of the forwarding process. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.5 | ColumnnwAtAclDestZone | read-write | mandatory | Specifies the destination zone name used to compare for matches on the access control list. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.6 | ColumnnwAtAclSrcZone | read-write | mandatory | Specifies the source zone to be used to compare for matches on the access control list. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.8 | NodenwAtFilters | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.9 | NodenwAtRedirector | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10 | NodenwAtEvent | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1 | NodenwAtEventLogConfig | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.1 | ScalarnwAtEventAdminSTATUS | read-write | mandatory | Sets the administrative state of AppleTalk event logging. Enabled (3) causes the event log to become active. Disabled (2) causes the event log to become inacti… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.2 | ScalarnwAtEventMaxEntries | read-write | mandatory | Sets the maximum number of entries allowed in the event log table. When the number of entries reaches the value of nwAtEventMaxEntries the first (oldest) entry… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.1.3 | ScalarnwAtEventTraceAll | read-write | mandatory | Enabled (3) allows logging of all event types on all router ports from all protocols and components. Disabled (2) causes the event log filter table to specify … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2 | NodenwAtEventLogFilterTable | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1 | TablenwAtEventFilterTable | not-accessible | mandatory | This table contains an entry for each event filter configured for AppleTalk Routing Service's events. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1 | RownwAtEventFilterEntry | not-accessible | mandatory | Each entry describes an event filter which defines a particular type of event to be logged to the event log. The value of nwIpEventProtocol indicates the value… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.1 | ColumnnwAtEventFltrProtocol | read-only | mandatory | Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentRtgInstance, which identifies the protocol involved in the event … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.2 | ColumnnwAtEventFltrIfNum | read-only | mandatory | Specifies the router port involved in the event for which the event filter exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.3 | ColumnnwAtEventFltrControl | read-write | mandatory | Set this value to 3 to add the entry to the event log table. Set this value to 2 to remove the entry from the event filter table. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.4 | ColumnnwAtEventFltrType | read-write | mandatory | This 6 bit mask specifies the types of events to be logged. By default all 6 bits are set to 1, indicating that all types of events are to be logged. Setting a… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.5 | ColumnnwAtEventFltrSeverity | read-write | mandatory | Specifies the level of severity an event must meet in order to be logged. Controls the amount of event logging by ignoring events of a lower priority than spec… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.6 | ColumnnwAtEventFltrAction | read-write | mandatory | Specifies how the events are to be logged. Logging to the `log' stores the events in the event log table (nwIpEventFltrAction). Logging to `trap' sends events … |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3 | NodenwAtEventLogTable | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1 | TablenwAtEventTable | not-accessible | mandatory | This table contains an entry for each event that has been logged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1 | RownwAtEventEntry | not-accessible | mandatory | Each entry contains the information about an event that has been logged to the event table. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.1 | ColumnnwAtEventNumber | read-only | mandatory | An ordinal value assigned to the event for which the log entry exists. nwAtEvnetNumber is assigned so that each event in the event log can be uniquely identifi… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.2 | ColumnnwAtEventTime | read-only | mandatory | Indicates the time at which the event was logged to the event log |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.3 | ColumnnwAtEventType | read-only | mandatory | Indicates the type of event that was logged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.4 | ColumnnwAtEventSeverity | read-only | mandatory | Indicates the severity that was assigned to this event. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.5 | ColumnnwAtEventProtocol | read-only | mandatory | Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentInstance which identifies the protocol or component that was invo… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.6 | ColumnnwAtEventIfNum | read-only | mandatory | Indicates the router port that was involved in the event. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.3.1.1.7 | ColumnnwAtEventTextString | read-only | mandatory | Contains the actual text string that was logged. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.11 | NodenwAtWorkGroup | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12 | NodenwAtNetDiag | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.1 | NodenwAtNetDiagPing | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.2 | NodenwAtNetDiagTelnet | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3 | NodenwAtNetDiagOutbound | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.1 | ScalarnwAtNetDiagOutboundNetAddress | read-write | mandatory | The AppleTalk Network Address of a node with which the diagnostic test will directly correspond. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.2 | ScalarnwAtNetDiagOutboundPort | read-write | mandatory | An integer representing the port through which the diagnostic test will broadcast or multicast packets. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.3 | ScalarnwAtNetDiagOutboundTimeout | read-write | mandatory | An integer representing the number of seconds before a diagnostic request will time out. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.4 | ScalarnwAtNetDiagOutboundRetries | read-write | mandatory | An integer representing the number of times a request will be repeated before failure. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.5 | ScalarnwAtNetDiagOutboundATEchoType | read-write | mandatory | The type of echo diagnostic function to initiate. Upon setting this to send EchoRequest (2), an echo request will be initiated and the value will be set to noA… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.6 | ScalarnwAtNetDiagOutboundATEchoStatus | read-write | mandatory | The current status of the echo diagnostic. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.7 | ScalarnwAtNetDiagOutboundNBPEntityObject | read-write | mandatory | The entity object or wildcard object used in the NBP lookup diagnostic. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.8 | ScalarnwAtNetDiagOutboundNBPEntityType | read-write | mandatory | The entity type or wildcard type used in the NBP lookup diagnostic. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.9 | ScalarnwAtNetDiagOutboundNBPEntityZone | read-write | mandatory | The entity zone used in the NBP lookup diagnostic. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.10 | ScalarnwAtNetDiagOutboundNBPType | read-write | mandatory | Specifies the type of outbound NBP diagnostic function to initiate. Upon setting this value to any value other than noAction (1) or other (10), the correspondi… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.11 | ScalarnwAtNetDiagOutboundNBPStatus | read-write | mandatory | Indicates the current status of the outbound NBP diagnostic. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.12 | ScalarnwAtNetDiagOutboundRTMPType | read-write | mandatory | The type of outbound RTMP diagnostic function to initiate. Upon setting this value to a value other than noAction(1) or other(8), the corresponding request wil… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.13 | ScalarnwAtNetDiagOutboundRTMPStatus | read-write | mandatory | The current status of the outbound RTMP diagnostic. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.14 | ScalarnwAtNetDiagOutboundRTMPNetStart | read-write | mandatory | The start of the network range from the last successful outbound RTMP request or route data request. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.15 | ScalarnwAtNetDiagOutboundRTMPNetEnd | read-write | mandatory | The end of the network range from the last successful outbound RTMP request or route data request. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.16 | ScalarnwAtNetDiagOutboundZIPType | read-write | mandatory | The type of outbound ZIP diagnostic function to initiate. Upon setting this value to a value other than noAction(1) or other(8), the corresponding request will… |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.17 | ScalarnwAtNetDiagOutboundZIPStatus | read-write | mandatory | The current status of the outbound ZIP diagnostic. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.18 | ScalarnwAtNetDiagOutboundZIPQueryNet | read-write | mandatory | The start of the network range to send ZIP query for. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.19 | ScalarnwAtNetDiagOutboundZIPQueryZone | read-write | mandatory | The first zone from the last successful ZIP query. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.20 | ScalarnwAtNetDiagOutboundZIPGetNetInfoZone | read-write | mandatory | The zone name to be used in a ZIP get-net-info request diagnostic. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.21 | ScalarnwAtNetDiagOutboundZIPGetNetInfoNetStart | read-write | mandatory | The start of the network range from the last successful ZIP get-net-info request. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.22 | ScalarnwAtNetDiagOutboundZIPGetNetInfoNetEnd | read-write | mandatory | The end of the network range from the last successful ZIP get-net-info request. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.23 | ScalarnwAtNetDiagOutboundZIPGetNetInfoMulticast | read-write | mandatory | The data-link multicast address from the last successful ZIP get-net-info request. |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.12.3.24 | ScalarnwAtNetDiagOutboundZIPGetNetInfoDefaultZone | read-write | mandatory | The default zone name from the last successful ZIP get-net-info request. |
| 1.3.6.1.4.1.52.4.2.2.2.4 | NodenwRtrExperimental | |||
| 1.3.6.1.4.1.52.4.2.2.2.4.1 | TablenwAtportZoneTable | not-accessible | mandatory | The table of zone information for non-default zones on ports. |
| 1.3.6.1.4.1.52.4.2.2.2.4.1.1 | RownwAtportZoneEntry | not-accessible | mandatory | An entry of zone information for a port. |
| 1.3.6.1.4.1.52.4.2.2.2.4.1.1.1 | ColumnnwAtportZonePort | read-only | mandatory | An integer representing the port to which this zone belongs. The port identified by a particular value of this object is the same port as identified by the sam… |
| 1.3.6.1.4.1.52.4.2.2.2.4.1.1.2 | ColumnnwAtportZoneName | read-only | mandatory | A zone name configured for the AppleTalk port referred to in the corresponding entry of nwAtportZonePort. When this value is changed in a router, the router mu… |
| 1.3.6.1.4.1.52.4.2.2.2.4.1.1.3 | ColumnnwAtportZoneStatus | read-write | mandatory | The status of this zone entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nwAtportZoneTable. Tha… |