CTRON-BRDG-MIB
52 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1155-SMI MISSING | Counter |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52 | Nodecabletron | |||
| 1.3.6.1.4.1.52.4 | Nodemibs | |||
| 1.3.6.1.4.1.52.4.1 | Nodectron | |||
| 1.3.6.1.4.1.52.4.1.2 | Nodectdatalink | |||
| 1.3.6.1.4.1.52.4.1.2.3 | NodectBridge | |||
| 1.3.6.1.4.1.52.4.1.2.3.3 | NodectBridgeSr | |||
| 1.3.6.1.4.1.52.4.1.2.3.3.1 | TablectBridgeSrPortPairTable | not-accessible | mandatory | A table containing information of source and destination port pairs for source routing |
| 1.3.6.1.4.1.52.4.1.2.3.3.1.1 | RowctBridgeSrPortPairEntry | not-accessible | mandatory | An entry consisting of objects specifying information for the source and destination port pairs used for source routing. |
| 1.3.6.1.4.1.52.4.1.2.3.3.1.1.1 | ColumnctBridgeSrPortPairSrcPort | read-only | mandatory | The source port (ie the port which received the packets) for which this entry has source routing information. |
| 1.3.6.1.4.1.52.4.1.2.3.3.1.1.2 | ColumnctBridgeSrPortPairDestPort | read-only | mandatory | The destination port (ie the port which transmitted the packets) for which this entry has source routing information. |
| 1.3.6.1.4.1.52.4.1.2.3.3.1.1.3 | ColumnctBridgeSrPortPairPackets | read-only | mandatory | The number of packets forward by the source route bridge from the SrcPort to the DestPort. |
| 1.3.6.1.4.1.52.4.1.2.3.3.1.1.4 | ColumnctBridgeSrPortPairState | read-write | mandatory | The state of source route bridging on this port pair. This is the desired state of the administrator. The operational state of the port pair is determined by t… |
| 1.3.6.1.4.1.52.4.1.2.3.4 | NodectBridgeTp | |||
| 1.3.6.1.4.1.52.4.1.2.3.4.1 | TablectBridgeTpPortFwdTable | not-accessible | mandatory | A table containing information of source and destination port transparent MAC layer forwarding. |
| 1.3.6.1.4.1.52.4.1.2.3.4.1.1 | RowctBridgeTpPortFwdEntry | not-accessible | mandatory | An entry consisting of objects specifying the source and destination port transparent MAC layer forwarding information. |
| 1.3.6.1.4.1.52.4.1.2.3.4.1.1.1 | ColumnctBridgeTpPortFwdSrcPort | read-only | mandatory | The source port (ie the port which received the packets) for which this entry has transparent bridge forwarding information. |
| 1.3.6.1.4.1.52.4.1.2.3.4.1.1.2 | ColumnctBridgeTpPortFwdDestPort | read-only | mandatory | The destination port (ie the port which the packets were transmitted out) for which this entry has transparent bridge forwarding information. |
| 1.3.6.1.4.1.52.4.1.2.3.4.1.1.3 | ColumnctBridgeTpPortFwdPackets | read-only | mandatory | The number of packets transparently forwarded by the bridge from the SrcPort to the DestPort. |
| 1.3.6.1.4.1.52.4.1.2.3.4.2 | TablectBridgeTpPortStateTable | not-accessible | mandatory | A table which allows the network administrator to enable/ disable transparent bridging on a particular port. |
| 1.3.6.1.4.1.52.4.1.2.3.4.2.1 | RowctBridgeTpPortStateEntry | not-accessible | mandatory | An entry containing the transparent bridge state of a particular port. |
| 1.3.6.1.4.1.52.4.1.2.3.4.2.1.1 | ColumnctBridgeTpPortStatePort | read-only | mandatory | The port for which this entry has transparent bridge state information. |
| 1.3.6.1.4.1.52.4.1.2.3.4.2.1.2 | ColumnctBridgeTpPortState | read-write | mandatory | The state of transparent bridging on this port. This is the desired state of the administrator. The operational state of the port is determined by this state a… |
| 1.3.6.1.4.1.52.4.1.2.3.5 | NodectBridgeSdbEnet | |||
| 1.3.6.1.4.1.52.4.1.2.3.5.1 | ScalarctBridgeSdbEnetTotFtrs | read-only | mandatory | The total number of Ethernet filters in the special database. |
| 1.3.6.1.4.1.52.4.1.2.3.5.2 | ScalarctBridgeSdbEnetNoMatch | read-write | mandatory | The process to be performed if no match is found in the Ethernet special database. The process of filtering or forwarding is for all ports. searchFDB results i… |
| 1.3.6.1.4.1.52.4.1.2.3.5.3 | TablectBridgeSdbEnetTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the specific packet string (destination address… |
| 1.3.6.1.4.1.52.4.1.2.3.5.3.1 | RowctBridgeSdbEnetEntry | not-accessible | mandatory | Filtering information which extends the filtering capability of IEEE 802.1d. |
| 1.3.6.1.4.1.52.4.1.2.3.5.3.1.1 | ColumnctBridgeSdbEnetFtrNo | read-only | mandatory | The Filter number for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.5.3.1.2 | ColumnctBridgeSdbEnetState | read-write | mandatory | The state of the filter for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.5.3.1.3 | ColumnctBridgeSdbEnetFtrData | read-write | mandatory | The specific packet string representing the destination address, source address, type/length field and a window of 64 bytes of packet data beginning at DataOff… |
| 1.3.6.1.4.1.52.4.1.2.3.5.3.1.4 | ColumnctBridgeSdbEnetDataOffset | read-write | mandatory | The offset into a packet from which the bridge begins its filtering decisions on the 64 byte data window. The value '0' indicates that the window begins at the… |
| 1.3.6.1.4.1.52.4.1.2.3.5.4 | TablectBridgeSdbEnetIOTable | not-accessible | mandatory | A table containing the set of ports to which frames received from specific ports and containing the specific packet string (destination address, source address… |
| 1.3.6.1.4.1.52.4.1.2.3.5.4.1 | RowctBridgeSdbEnetIOEntry | not-accessible | mandatory | The set of ports to which frames received by the RcvPort and containing the specific packet string of the corresponding filter number of SdbEnetTable are allow… |
| 1.3.6.1.4.1.52.4.1.2.3.5.4.1.1 | ColumnctBridgeSdbEnetIOFtrNo | read-write | mandatory | The Filter number for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.5.4.1.2 | ColumnctBridgeSdbEnetIORcvPort | read-write | mandatory | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of '… |
| 1.3.6.1.4.1.52.4.1.2.3.5.4.1.3 | ColumnctBridgeSdbEnetIOAllowedToGoTo | read-write | mandatory | The set of ports to which frames received from a specific port and containing the specific packet string of the corresponding filter number are allowed to be f… |
| 1.3.6.1.4.1.52.4.1.2.3.5.4.1.4 | ColumnctBridgeSdbEnetIODelEntry | read-write | mandatory | Writing a '1' to this object deletes this entry from the Ethernet special database. This object will always return a '1' when read. |
| 1.3.6.1.4.1.52.4.1.2.3.6 | NodectBridgeSdbTr | |||
| 1.3.6.1.4.1.52.4.1.2.3.6.1 | ScalarctBridgeSdbTrTotFtrs | read-only | mandatory | The total number of Token Ring filters in the special database. |
| 1.3.6.1.4.1.52.4.1.2.3.6.2 | ScalarctBridgeSdbTrNoMatch | read-write | mandatory | The process to be performed if no match is found in the Token Ring special database. The process of filtering or forwarding is for all ports. searchFDB results… |
| 1.3.6.1.4.1.52.4.1.2.3.6.3 | TablectBridgeSdbTrTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the specific packet string (AC, FC, destination… |
| 1.3.6.1.4.1.52.4.1.2.3.6.3.1 | RowctBridgeSdbTrEntry | not-accessible | mandatory | Filtering information which extends the filtering capability of IEEE 802.1d. |
| 1.3.6.1.4.1.52.4.1.2.3.6.3.1.1 | ColumnctBridgeSdbTrFtrNo | read-only | mandatory | The Filter number for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.6.3.1.2 | ColumnctBridgeSdbTrState | read-write | mandatory | The state of the filter for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.6.3.1.3 | ColumnctBridgeSdbTrFtrData | read-write | mandatory | The specific packet string consisting of the AC, FC, destination address, source address, and a window of 64 bytes of packet data beginning at DataOffset to be… |
| 1.3.6.1.4.1.52.4.1.2.3.6.3.1.4 | ColumnctBridgeSdbTrDataOffset | read-write | mandatory | The offset into a packet from which the bridge begins its filtering decisions on the 64 byte data window. The value '0' indicates that the window begins at the… |
| 1.3.6.1.4.1.52.4.1.2.3.6.4 | TablectBridgeSdbTrIOTable | not-accessible | mandatory | A table containing the set of ports to which frames received from specific ports and containing the specific packet string (AC, FC, destination address, source… |
| 1.3.6.1.4.1.52.4.1.2.3.6.4.1 | RowctBridgeSdbTrIOEntry | not-accessible | mandatory | The set of ports to which frames received by the RcvPort and containing the specific packet string of the corresponding filter number of SdbTrTable are allowed… |
| 1.3.6.1.4.1.52.4.1.2.3.6.4.1.1 | ColumnctBridgeSdbTrIOFtrNo | read-write | mandatory | The Filter number for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.6.4.1.2 | ColumnctBridgeSdbTrIORcvPort | read-write | mandatory | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of '… |
| 1.3.6.1.4.1.52.4.1.2.3.6.4.1.3 | ColumnctBridgeSdbTrIOAllowedToGoTo | read-write | mandatory | The set of ports to which frames received from a specific port and containing the specific packet string of the corresponding filter number are allowed to be f… |
| 1.3.6.1.4.1.52.4.1.2.3.6.4.1.4 | ColumnctBridgeSdbTrIODelEntry | read-write | mandatory | Writing a '1' to this object deletes this entry from the Token Ring special database. This object will always return a '1' when read. |