CTRON-BRIDGE-MIB
133 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | BridgeId |
| CTRON-MIB-NAMES | ctBridge |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.3.2 | NodectBridgeStp | |||
| 1.3.6.1.4.1.52.4.1.2.3.2.1 | ScalarctBridgeStpProtocolSpecification | read-write | mandatory | This object allows the network manager to select which Spanning Tree Protocol will be operational on the bridge. The value 'decLb100(2)' indicates the DEC LANb… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2 | NodectBridgePvst | |||
| 1.3.6.1.4.1.52.4.1.2.3.2.2.1 | ScalarctPvstStpMode | read-write | deprecated | Specifies whether the switch is in 802.1D/Q single spanning tree mode, or PVST mode. If the switch is configured with PVST information for some VLANs, setting … |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.2 | ScalarctPvstMaxNumStp | read-only | deprecated | Returns maximum number of spanning trees that this device can implement. This will limit the number of VLANs that can be configured with distinct spanning tree… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.3 | ScalarctPvstNumStps | read-write | deprecated | When read, this returns the number of PVST spanning trees active in the switch, which should correspond to the number of entries in ctPvstStpTable. When writte… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.4 | ScalarctPvstLastTopologyChange | read-only | deprecated | This summary object contains the value of sysUpTime when any of the rows in ctPvstStpTable last incremented ctPvstStpTopChanges. Poll this object to determine … |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5 | TablectPvstStpTable | not-accessible | deprecated | A collection of spanning tree objects per VLAN. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1 | RowctPvstStpEntry | not-accessible | deprecated | An entry related to a specific spanning tree. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.1 | ColumnctPvstStpVlanId | read-write | deprecated | The VLAN-ID of the VLAN on which this spanning tree is running. Writing a VLAN-ID will create a separate spanning tree for that VLAN, if it previously was part… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.2 | ColumnctPvstStpProtocolSpecification | read-only | deprecated | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.3 | ColumnctPvstStpPriority | read-write | deprecated | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.4 | ColumnctPvstStpTimeSinceTopologyChange | read-only | deprecated | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.5 | ColumnctPvstStpTopChanges | read-only | deprecated | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.6 | ColumnctPvstStpDesignatedRoot | read-only | deprecated | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.7 | ColumnctPvstStpRootCost | read-only | deprecated | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.8 | ColumnctPvstStpRootPort | read-only | deprecated | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.9 | ColumnctPvstStpMaxAge | read-only | deprecated | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.10 | ColumnctPvstStpHelloTime | read-only | deprecated | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.11 | ColumnctPvstStpHoldTime | read-only | deprecated | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.12 | ColumnctPvstStpForwardDelay | read-only | deprecated | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.13 | ColumnctPvstStpBridgeMaxAge | read-write | deprecated | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related … |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.14 | ColumnctPvstStpBridgeHelloTime | read-write | deprecated | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second.… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.5.1.15 | ColumnctPvstStpBridgeForwardDelay | read-write | deprecated | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is re… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6 | TablectPvstStpPortTable | not-accessible | deprecated | A collection of per-port spanning tree objects per VLAN. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1 | RowctPvstStpPortEntry | not-accessible | deprecated | A port entry related to a specific spanning tree. Only ports which are in a VLAN which is running a PVST should be reported for that VLAN. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.1 | ColumnctPvstStpPortVlanId | read-only | deprecated | The VLAN-ID of the VLAN on which this spanning tree is running. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.2 | ColumnctPvstStpPort | read-only | deprecated | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.3 | ColumnctPvstStpPortPriority | read-write | deprecated | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.4 | ColumnctPvstStpPortState | read-only | deprecated | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.5 | ColumnctPvstStpPortEnable | read-write | deprecated | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.6 | ColumnctPvstStpPortPathCost | read-write | deprecated | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.7 | ColumnctPvstStpPortDesignatedRoot | read-only | deprecated | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.8 | ColumnctPvstStpPortDesignatedCost | read-only | deprecated | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.9 | ColumnctPvstStpPortDesignatedBridge | read-only | deprecated | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.10 | ColumnctPvstStpPortDesignatedPort | read-only | deprecated | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.11 | ColumnctPvstStpPortForwardTransitions | read-only | deprecated | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.52.4.1.2.3.3 | NodectBridgeSr | |||
| 1.3.6.1.4.1.52.4.1.2.3.3.1 | TablectBridgeSrPortPairTable | not-accessible | mandatory | A table containing information of source and destination port pairs for source routing. |
| 1.3.6.1.4.1.52.4.1.2.3.3.1.1 | RowctBridgeSrPortPairEntry | not-accessible | mandatory | An entry consisting of objects specifying information for the source and destination port pairs used for source routing. |
| 1.3.6.1.4.1.52.4.1.2.3.3.1.1.1 | ColumnctBridgeSrPortPairSrcPort | read-only | mandatory | The source port (ie the port which received the packets) for which this entry has source routing information. |
| 1.3.6.1.4.1.52.4.1.2.3.3.1.1.2 | ColumnctBridgeSrPortPairDestPort | read-only | mandatory | The destination port (ie the port which transmitted the packets) for which this entry has source routing information. |
| 1.3.6.1.4.1.52.4.1.2.3.3.1.1.3 | ColumnctBridgeSrPortPairPackets | read-only | mandatory | The number of packets forward by the source route bridge from the SrcPort to the DestPort. |
| 1.3.6.1.4.1.52.4.1.2.3.3.1.1.4 | ColumnctBridgeSrPortPairState | read-write | mandatory | The state of source route bridging on this port pair. This is the desired state of the administrator. The operational state of the port pair is determined by t… |
| 1.3.6.1.4.1.52.4.1.2.3.3.2 | ScalarctBridgeSrConfigPortType | read-write | mandatory | This object selects the type of Bridging performed on a given bridge port. It is used by the bridge to determine if conversion from a Source Routing packet to … |
| 1.3.6.1.4.1.52.4.1.2.3.4 | NodectBridgeTp | |||
| 1.3.6.1.4.1.52.4.1.2.3.4.1 | TablectBridgeTpPortPairTable | not-accessible | mandatory | A table containing information of source and destination port pairs for transparent MAC briding. |
| 1.3.6.1.4.1.52.4.1.2.3.4.1.1 | RowctBridgeTpPortPairEntry | not-accessible | mandatory | An entry consisting of objects specifying information for the source and destination port pairs used for transparent bridging. |
| 1.3.6.1.4.1.52.4.1.2.3.4.1.1.1 | ColumnctBridgeTpPortPairSrcPort | read-only | mandatory | The source port (ie the port which received the packets) for which this entry has transparent bridge information. |
| 1.3.6.1.4.1.52.4.1.2.3.4.1.1.2 | ColumnctBridgeTpPortPairDestPort | read-only | mandatory | The destination port (ie the port which the packets were transmitted out) for which this entry has transparent bridge information. |
| 1.3.6.1.4.1.52.4.1.2.3.4.1.1.3 | ColumnctBridgeTpPortPairPackets | read-only | mandatory | The number of packets transparently forwarded by the bridge from the SrcPort to the DestPort. |
| 1.3.6.1.4.1.52.4.1.2.3.4.1.1.4 | ColumnctBridgeTpPortPairState | read-write | mandatory | The state of transparent bridging on this port pair. This is the desired state of the administrator. The operational state of the port pair is determined by th… |
| 1.3.6.1.4.1.52.4.1.2.3.5 | NodectBridgeSdbEnet | |||
| 1.3.6.1.4.1.52.4.1.2.3.5.1 | ScalarctBridgeSdbEnetTotFtrs | read-only | mandatory | The total number of Ethernet filters in the special database. |
| 1.3.6.1.4.1.52.4.1.2.3.5.2 | ScalarctBridgeSdbEnetNoMatch | read-write | mandatory | The process to be performed if no match is found in the Ethernet special database. The process of filtering or forwarding is for all ports. searchFDB results i… |
| 1.3.6.1.4.1.52.4.1.2.3.5.3 | TablectBridgeSdbEnetTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the specific packet string (destination address… |
| 1.3.6.1.4.1.52.4.1.2.3.5.3.1 | RowctBridgeSdbEnetEntry | not-accessible | mandatory | Filtering information which extends the filtering capability of IEEE 802.1d. |
| 1.3.6.1.4.1.52.4.1.2.3.5.3.1.1 | ColumnctBridgeSdbEnetFtrNo | read-only | mandatory | The Filter number for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.5.3.1.2 | ColumnctBridgeSdbEnetState | read-write | mandatory | The state of the filter for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.5.3.1.3 | ColumnctBridgeSdbEnetFtrData | read-write | mandatory | The specific packet string representing the destination address, source address, type/length field and a window of 64 bytes of packet data beginning at DataOff… |
| 1.3.6.1.4.1.52.4.1.2.3.5.3.1.4 | ColumnctBridgeSdbEnetDataOffset | read-write | mandatory | The offset into a packet from which the bridge begins its filtering decisions on the 64 byte data window. The value '0' indicates that the window begins at the… |
| 1.3.6.1.4.1.52.4.1.2.3.5.4 | TablectBridgeSdbEnetIOTable | not-accessible | mandatory | A table containing the set of ports to which frames received from specific ports and containing the specific packet string (destination address, source address… |
| 1.3.6.1.4.1.52.4.1.2.3.5.4.1 | RowctBridgeSdbEnetIOEntry | not-accessible | mandatory | The set of ports to which frames received by the RcvPort and containing the specific packet string of the corresponding filter number of SdbEnetTable are allow… |
| 1.3.6.1.4.1.52.4.1.2.3.5.4.1.1 | ColumnctBridgeSdbEnetIOFtrNo | read-only | mandatory | The Filter number for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.5.4.1.2 | ColumnctBridgeSdbEnetIORcvPort | read-write | mandatory | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of '… |
| 1.3.6.1.4.1.52.4.1.2.3.5.4.1.3 | ColumnctBridgeSdbEnetIOAllowedToGoTo | read-write | mandatory | The set of ports to which frames received from a specific port and containing the specific packet string of the corresponding filter number are allowed to be f… |
| 1.3.6.1.4.1.52.4.1.2.3.5.4.1.4 | ColumnctBridgeSdbEnetIODelEntry | read-write | mandatory | Writing a '1' to this object deletes this entry from the Ethernet special database. This object will always return a '1' when read. |
| 1.3.6.1.4.1.52.4.1.2.3.6 | NodectBridgeSdbTr | |||
| 1.3.6.1.4.1.52.4.1.2.3.6.1 | ScalarctBridgeSdbTrTotFtrs | read-only | mandatory | The total number of Token Ring filters in the special database. |
| 1.3.6.1.4.1.52.4.1.2.3.6.2 | ScalarctBridgeSdbTrNoMatch | read-write | mandatory | The process to be performed if no match is found in the Token Ring special database. The process of filtering or forwarding is for all ports. searchFDB results… |
| 1.3.6.1.4.1.52.4.1.2.3.6.3 | TablectBridgeSdbTrTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the specific packet string (AC, FC, destination… |
| 1.3.6.1.4.1.52.4.1.2.3.6.3.1 | RowctBridgeSdbTrEntry | not-accessible | mandatory | Filtering information which extends the filtering capability of IEEE 802.1d. |
| 1.3.6.1.4.1.52.4.1.2.3.6.3.1.1 | ColumnctBridgeSdbTrFtrNo | read-only | mandatory | The Filter number for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.6.3.1.2 | ColumnctBridgeSdbTrState | read-write | mandatory | The state of the filter for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.6.3.1.3 | ColumnctBridgeSdbTrFtrData | read-write | mandatory | The specific packet string consisting of the AC, FC, destination address, source address, and a window of 64 bytes of packet data beginning at DataOffset to be… |
| 1.3.6.1.4.1.52.4.1.2.3.6.3.1.4 | ColumnctBridgeSdbTrDataOffset | read-write | mandatory | The offset into a packet from which the bridge begins its filtering decisions on the 64 byte data window. The value '0' indicates that the window begins at the… |
| 1.3.6.1.4.1.52.4.1.2.3.6.4 | TablectBridgeSdbTrIOTable | not-accessible | mandatory | A table containing the set of ports to which frames received from specific ports and containing the specific packet string (AC, FC, destination address, source… |
| 1.3.6.1.4.1.52.4.1.2.3.6.4.1 | RowctBridgeSdbTrIOEntry | not-accessible | mandatory | The set of ports to which frames received by the RcvPort and containing the specific packet string of the corresponding filter number of SdbTrTable are allowed… |
| 1.3.6.1.4.1.52.4.1.2.3.6.4.1.1 | ColumnctBridgeSdbTrIOFtrNo | read-only | mandatory | The Filter number for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.6.4.1.2 | ColumnctBridgeSdbTrIORcvPort | read-write | mandatory | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of '… |
| 1.3.6.1.4.1.52.4.1.2.3.6.4.1.3 | ColumnctBridgeSdbTrIOAllowedToGoTo | read-write | mandatory | The set of ports to which frames received from a specific port and containing the specific packet string of the corresponding filter number are allowed to be f… |
| 1.3.6.1.4.1.52.4.1.2.3.6.4.1.4 | ColumnctBridgeSdbTrIODelEntry | read-write | mandatory | Writing a '1' to this object deletes this entry from the Token Ring special database. This object will always return a '1' when read. |
| 1.3.6.1.4.1.52.4.1.2.3.7 | NodectBridgeTransTrEnet | |||
| 1.3.6.1.4.1.52.4.1.2.3.7.1 | ScalarctBridgeTransTrEnetAutoMode | read-write | mandatory | This object selects whether the auto translation mode is enabled. Auto translation means a bridge learns, from the CSMA/CD ports, which frame format (ie Ethern… |
| 1.3.6.1.4.1.52.4.1.2.3.7.2 | ScalarctBridgeTransTrEnetDualMode | read-write | mandatory | This object selects whether dual mode is enabled. Dual mode means a bridge translates a Token Ring broadcast or multicast packet to both CSMA/CD frame formats … |
| 1.3.6.1.4.1.52.4.1.2.3.7.3 | ScalarctBridgeTransTrEnetNovell | read-write | mandatory | This object selects the CSMA/CD frame format (ie Ethernet or IEEE 802.3 w/snap) to which the bridge translates a Novell Token Ring packet. This selection is ov… |
| 1.3.6.1.4.1.52.4.1.2.3.7.4 | ScalarctBridgeTransTrEnetIP | read-write | mandatory | This object selects the CSMA/CD frame format (ie Ethernet or IEEE 802.3 w/snap) to which the bridge translates an IP Token Ring packet including ARP packets. T… |
| 1.3.6.1.4.1.52.4.1.2.3.7.5 | ScalarctBridgeTransTrEnetAARP | read-write | mandatory | This object selects the CSMA/CD frame format (ie Ethernet or IEEE 802.3 w/snap) to which the bridge translates an Appletalk ARP Token Ring packet. This selecti… |
| 1.3.6.1.4.1.52.4.1.2.3.7.6 | ScalarctBridgeTransTrEnetNovAdd | read-write | mandatory | This object selects the bit ordering of the Hardware Addresses located in the 'data field' of a Token Ring NOVELL packet. The 'data field' includes all bytes o… |
| 1.3.6.1.4.1.52.4.1.2.3.7.7 | TablectBridgeTransTrEnetIBMTable | not-accessible | mandatory | A table containing SAP (Service Access Point) values of IBM protocols that the bridge will translate from Token Ring (802.5 w/o snap) to Ethernet. |
| 1.3.6.1.4.1.52.4.1.2.3.7.7.1 | RowctBridgeTransTrEnetIBMEntry | not-accessible | mandatory | This entry contains the SAP value of an IBM protocol that is to be translated to Ethernet. The value of the Ethernet type field used in the translation is 80D5… |
| 1.3.6.1.4.1.52.4.1.2.3.7.7.1.1 | ColumnctBridgeTransTrEnetIBMIndex | read-only | mandatory | The index of an entry in the Token Ring to Ethernet Translation table for IBM protocols. The index ranges from 1 to 20. |
| 1.3.6.1.4.1.52.4.1.2.3.7.7.1.2 | ColumnctBridgeTransTrEnetIBMSap | read-write | mandatory | The SAP value of an IBM protocol. The bridge will translate all Token Ring/802.5 packets without a snap header having this SAP value to Ethernet packets with t… |
| 1.3.6.1.4.1.52.4.1.2.3.7.7.1.3 | ColumnctBridgeTransTrEnetIBMState | read-write | mandatory | The state of this entry. A value of 2 indicates that this entry will not be used in the bridge's translation decisions. |
| 1.3.6.1.4.1.52.4.1.2.3.7.8 | ScalarctBridgeTransTrEnetSnapFormat | read-write | mandatory | This object selects the CSMA/CD frame format (ie Ethernet or IEEE 802.3 w/snap) to which the bridge translates all Token Ring packets with a snap header whose … |
| 1.3.6.1.4.1.52.4.1.2.3.7.9 | TablectBridgeTransTrEnetSnapTable | not-accessible | mandatory | A table containing Ethernet type field entries that the bridge will use to determine how to translate a Token Ring (802.5 w/snap) packet to a CSMA/CD packet. I… |
| 1.3.6.1.4.1.52.4.1.2.3.7.9.1 | RowctBridgeTransTrEnetSnapEntry | not-accessible | mandatory | This entry contains an Ethernet type field value and its associated state. |
| 1.3.6.1.4.1.52.4.1.2.3.7.9.1.1 | ColumnctBridgeTransTrEnetSnapIndex | read-only | mandatory | The index of an entry in the Token Ring to Ethernet Translation table for Ethernet type fields. The index ranges from 1 to 20. |
| 1.3.6.1.4.1.52.4.1.2.3.7.9.1.2 | ColumnctBridgeTransTrEnetSnapType | read-write | mandatory | The Ethernet type field value which the bridge will translate all Token Ring/802.5 packets with a snap header having this type to the format specified by ctBri… |
| 1.3.6.1.4.1.52.4.1.2.3.7.9.1.3 | ColumnctBridgeTransTrEnetSnapState | read-write | mandatory | The state of this entry. A value of 2 indicates that this entry will not be used in the bridge's translation decisions. |
| 1.3.6.1.4.1.52.4.1.2.3.8 | NodectBridgeExtendedControl | |||
| 1.3.6.1.4.1.52.4.1.2.3.8.1 | ScalarctBridgeBaseChassisMgr | read-only | mandatory | This object reports the chassis management capability of the bridging device. Chassis management is defined as the ability of the device to report status on MI… |
| 1.3.6.1.4.1.52.4.1.2.3.9 | NodectBridgeSdbGeneric | |||
| 1.3.6.1.4.1.52.4.1.2.3.9.1 | ScalarctBridgeSdbGenericTotFtrs | read-only | mandatory | The total number of Generic filters in the special database. |
| 1.3.6.1.4.1.52.4.1.2.3.9.2 | ScalarctBridgeSdbGenericNoMatch | read-write | mandatory | The process to be performed if no match is found in the Generic special database. The process of filtering or forwarding is for all ports. searchFDB results in… |
| 1.3.6.1.4.1.52.4.1.2.3.9.3 | TablectBridgeSdbGenericTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the specific packet string (destination address… |
| 1.3.6.1.4.1.52.4.1.2.3.9.3.1 | RowctBridgeSdbGenericEntry | not-accessible | mandatory | Filtering information which extends the filtering capability of IEEE 802.1d. |
| 1.3.6.1.4.1.52.4.1.2.3.9.3.1.1 | ColumnctBridgeSdbGenericFtrNo | read-only | mandatory | The Filter number for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.9.3.1.2 | ColumnctBridgeSdbGenericState | read-write | mandatory | The state of the filter for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.9.3.1.3 | ColumnctBridgeSdbGenericFtrData | read-write | mandatory | The specific packet string representing the destination address, source address, type/length field and a window of 64 bytes of packet data beginning at DataOff… |
| 1.3.6.1.4.1.52.4.1.2.3.9.3.1.4 | ColumnctBridgeSdbGenericDataOffset | read-write | mandatory | The offset into a packet from which the bridge begins its filtering decisions on the 64 byte data window. The value '0' indicates that the window begins at the… |
| 1.3.6.1.4.1.52.4.1.2.3.9.3.1.5 | ColumnctBridgeSdbGenericFilterType | read-write | mandatory | This object specifies the type of media for which this special filter entry applies. The value of this object is a bit encoding which allows for multiple media… |
| 1.3.6.1.4.1.52.4.1.2.3.9.4 | TablectBridgeSdbGenericIOTable | not-accessible | mandatory | A table containing the set of ports to which frames received from specific ports and containing the specific packet string (destination address, source address… |
| 1.3.6.1.4.1.52.4.1.2.3.9.4.1 | RowctBridgeSdbGenericIOEntry | not-accessible | mandatory | The set of ports to which frames received by the RcvPort and containing the specific packet string of the corresponding filter number of SdbGenericTable are al… |
| 1.3.6.1.4.1.52.4.1.2.3.9.4.1.1 | ColumnctBridgeSdbGenericIOFtrNo | read-only | mandatory | The Filter number for which this entry contains filtering information. |
| 1.3.6.1.4.1.52.4.1.2.3.9.4.1.2 | ColumnctBridgeSdbGenericIORcvPort | read-write | mandatory | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of '… |
| 1.3.6.1.4.1.52.4.1.2.3.9.4.1.3 | ColumnctBridgeSdbGenericIOAllowedToGoTo | read-write | mandatory | The set of ports to which frames received from a specific port and containing the specific packet string of the corresponding filter number are allowed to be f… |
| 1.3.6.1.4.1.52.4.1.2.3.9.4.1.4 | ColumnctBridgeSdbGenericIODelEntry | read-write | mandatory | Writing a '1' to this object deletes this entry from the Generic special database. This object will always return a '1' when read. |
| 1.3.6.1.4.1.52.4.1.2.3.10 | NodectBridgeLoadShare | |||
| 1.3.6.1.4.1.52.4.1.2.3.10.1 | TablectBridgeLoadShareInstanceTable | not-accessible | mandatory | A list of load share instance objects. |
| 1.3.6.1.4.1.52.4.1.2.3.10.1.1 | RowctBridgeLoadShareInstanceEntry | not-accessible | mandatory | A list of objects for a particular load share instance. |
| 1.3.6.1.4.1.52.4.1.2.3.10.1.1.1 | ColumnctBridgeLoadShareInstanceId | read-only | mandatory | Returns the instance for a load share member in the table of load share instances. |
| 1.3.6.1.4.1.52.4.1.2.3.10.1.1.2 | ColumnctBridgeLoadShareAdminStatus | read-write | mandatory | The administrative state of load sharing for this instance. |
| 1.3.6.1.4.1.52.4.1.2.3.10.1.1.3 | ColumnctBridgeLoadShareOperStatus | read-only | mandatory | The operational status of load sharing for this instance. |
| 1.3.6.1.4.1.52.4.1.2.3.10.2 | TablectBridgeLoadSharePortTable | not-accessible | mandatory | A list of load share port objects. |
| 1.3.6.1.4.1.52.4.1.2.3.10.2.1 | RowctBridgeLoadSharePortEntry | not-accessible | mandatory | A load share port entry containing objects pertaining to a particular load share port. |
| 1.3.6.1.4.1.52.4.1.2.3.10.2.1.1 | ColumnctBridgeLoadSharePortNum | read-only | mandatory | Returns the port number of a member port belonging to a load share instance. |
| 1.3.6.1.4.1.52.4.1.2.3.10.2.1.2 | ColumnctBridgeLoadSharePortInstanceId | read-only | mandatory | A unique value indentifying a member instance in the table of load share instances. This value is similar to ctBridgeLoadShareInstanceId. |
| 1.3.6.1.4.1.52.4.1.2.3.10.2.1.3 | ColumnctBridgeLoadSharePortAdminStatus | read-write | mandatory | The administrative state of the port associated with this instance of load share. |
| 1.3.6.1.4.1.52.4.1.2.3.10.2.1.4 | ColumnctBridgeLoadSharePortOperStatus | read-only | mandatory | The operational state of the port associated with this instance of load share. |
| 1.3.6.1.4.1.52.4.1.2.3.10.2.1.5 | ColumnctBridgeLoadSharePortForwardMask | read-only | mandatory | The Mask used to foward unknown packets on. |
| 1.3.6.1.4.1.52.4.1.2.3.10.2.1.6 | ColumnctBridgeLoadSharePortForwardInstance | read-only | mandatory | The instance that the ctLoadSharePortFowardMask is running on for this ctLoadSharePortNumber. |
| 1.3.6.1.4.1.52.4.1.2.3.10.2.1.7 | ColumnctBridgeLoadSharePortNumPorts | read-only | mandatory | Displays the number of SmartTrunk ports in this redundant path. |