CTRON-CDP-MIB
39 objects
This module defines a schema that maintains per port neighbor information for the express purpose of helping a managment application map Layaer 2 topology.
Imported Objects
| CTRON-MIB-NAMES | ctCDP |
| IF-MIB | ifIndex InterfaceIndex |
| RMON2-MIB | TimeFilter |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.19.1 | NodectCDPNeighbor | |||
| 1.3.6.1.4.1.52.4.1.2.19.1.1 | ScalarctCDPNeighborLastChange | read-only | current | The value of sysUpTime at the time the cdpNeighborTable was subject to these events: row insertion, row deletion |
| 1.3.6.1.4.1.52.4.1.2.19.1.2 | ScalarctCDPNeighborLastDelete | read-only | current | The value of sysUpTime the last time an entry in the ctCDPNeighborTable was deleted. This should be polled at an interval no greater than one second. When it c… |
| 1.3.6.1.4.1.52.4.1.2.19.1.3 | TablectCDPNeighborTable | not-accessible | current | The CommonNeighborTable holds all known neighbors speaking cdp protocols. |
| 1.3.6.1.4.1.52.4.1.2.19.1.3.1 | RowctCDPNeighborEntry | not-accessible | current | An entry containing objects pertaining to neighbor devices speaking CDP protocols. |
| 1.3.6.1.4.1.52.4.1.2.19.1.3.1.1 | ColumnctCDPNeighborTimeMark | read-only | current | A TimeFilter for this entry as defined in RFC 2021. |
| 1.3.6.1.4.1.52.4.1.2.19.1.3.1.2 | ColumnctCDPNeighborMAC | read-only | current | The interface mac address of neighboring entity. |
| 1.3.6.1.4.1.52.4.1.2.19.1.3.1.3 | ColumnctCDPNeighborIP | read-only | current | The IP address of SNMP agent on neighboring entity from which corresponding data for this port may be obtained. In the case of unnumbered IP Interfaces, this m… |
| 1.3.6.1.4.1.52.4.1.2.19.1.3.1.4 | ColumnctCDPNeighborPort | read-only | current | The ifIndex of the remote port. Note, there may not be an IP Interface associated with this port. |
| 1.3.6.1.4.1.52.4.1.2.19.1.3.1.5 | ColumnctCDPNeighborType | read-only | current | The type of entity. This value is used to determine the general type of the object or service connected to a given port. In general, it is better to use system… |
| 1.3.6.1.4.1.52.4.1.2.19.1.3.1.6 | ColumnctCDPNeighborChassisMAC | read-only | current | The MAC Address of the chassis in architectures where many manageable elements exist within a given chassis. If no containing chassis exists, exists, this valu… |
| 1.3.6.1.4.1.52.4.1.2.19.1.3.1.7 | ColumnctCDPNeighborChassisIP | read-only | current | The IP address of the chassis itself. If no containing chassis exists, this value must be set to 0.0.0.0 |
| 1.3.6.1.4.1.52.4.1.2.19.1.3.1.8 | ColumnctCDPNeighborDescription | read-only | current | A textual description of the neighbor. It should contain operator diagnostic information similar to sysDescr: system type, firmware version... |
| 1.3.6.1.4.1.52.4.1.2.19.1.3.1.9 | ColumnctCDPNeighborPortName | read-only | current | The value of object ifName of the neighbor's port. |
| 1.3.6.1.4.1.52.4.1.2.19.1.3.1.10 | ColumnctCDPNeighborCapability | read-only | current | The current capabilities of the neighbor port. |
| 1.3.6.1.4.1.52.4.1.2.19.2 | NodectCDPStatus | |||
| 1.3.6.1.4.1.52.4.1.2.19.2.1 | ScalarctCDPGlobalStatus | read-write | current | The state of CDP for this entire managed entity. autoEnable(3) should the default mode for new implementations. In autoEnable mode, the device listens for CDP … |
| 1.3.6.1.4.1.52.4.1.2.19.2.2 | ScalarctCDPAuthenticationCode | read-write | current | The authentication code may be set to create individual CDP domains. CDP packets that arrive on a port must contain this string. This authentication code is gl… |
| 1.3.6.1.4.1.52.4.1.2.19.2.3 | TablectCDPPortTable | not-accessible | current | This table shows enable/disable CDP status for each port. |
| 1.3.6.1.4.1.52.4.1.2.19.2.3.1 | RowctCDPPortTableEntry | not-accessible | current | Each entry is indicative of a particuliar port in the system. |
| 1.3.6.1.4.1.52.4.1.2.19.2.3.1.1 | ColumnctCDPPort | read-only | current | The ifIndex for a physical port. ifConnectorPresent is true(1) defines a physical port on which cdp pdus will be emitted. |
| 1.3.6.1.4.1.52.4.1.2.19.2.3.1.2 | ColumnctCDPPortStatus | read-write | current | The current state administrative of cdp on a physical port. The ability to enable and disable the sending of CDP pdu's on a per port basis is controlled here. |
| 1.3.6.1.4.1.52.4.1.2.19.2.4 | ScalarctCDPTransmitFrequency | read-write | current | The rate in seconds at which CDP pdu's are sent on all enabled ports. |
| 1.3.6.1.4.1.52.4.1.2.19.2.5 | ScalarctCDPHoldTime | read-write | current | The maximum amount of time in seconds to wait before aging out an entry in the ctCDPNeighborTable. The agent may choose to change this value based on the hold … |
| 1.3.6.1.4.1.52.4.1.2.19.2.6 | ScalarctCDPVersion | read-only | current | The CDP version supported by this device as a bit string. For example, given support for two versions of cdp: 3 and 4 the bit representation in big endian form… |
| 1.3.6.1.4.1.52.4.1.2.19.3 | IdentityctronCdpMIB | This module defines a schema that maintains per port neighbor information for the express purpose of helping a managment application map Layaer 2 topology. | ||
| 1.3.6.1.4.1.52.4.1.2.19.3.11 | NodectCDPConformance | |||
| 1.3.6.1.4.1.52.4.1.2.19.3.11.1 | NodectCDPCompliances | |||
| 1.3.6.1.4.1.52.4.1.2.19.3.11.1.1 | CompliancectCDPComplianceV10 | current | The compliance statement for the ctronCdpMIB. | |
| 1.3.6.1.4.1.52.4.1.2.19.3.11.2 | NodectCDPGroups | |||
| 1.3.6.1.4.1.52.4.1.2.19.3.11.2.1 | GroupctCdpGroupV10 | current | The set of managed objects that make up version 2 of the CTRON-CDP-MIB. | |
| 1.3.6.1.4.1.52.4.1.2.19.4 | NodectCDPStats | |||
| 1.3.6.1.4.1.52.4.1.2.19.4.1 | ScalarctCDPInPackets | read-only | current | Count of CDP packets received by the device over all the ports. |
| 1.3.6.1.4.1.52.4.1.2.19.4.2 | ScalarctCDPOutPackets | read-only | current | Count of CDP packets successfully transmitted by the device over all the ports. |
| 1.3.6.1.4.1.52.4.1.2.19.4.3 | ScalarctCDPInvalidVersionPackets | read-only | current | Count of CDP packets received with version not supported by the device. |
| 1.3.6.1.4.1.52.4.1.2.19.4.4 | ScalarctCDPParseErrorPackets | read-only | current | Count of CDP packets received and could not be parsed successfully by the device. |
| 1.3.6.1.4.1.52.4.1.2.19.4.5 | ScalarctCDPTransmitErrors | read-only | current | Count of errors occured by the device while trying to transmit CDP packets. |
| 1.3.6.1.4.1.52.4.1.2.19.4.6 | ScalarctCDPMemoryErrors | read-only | current | Count of memory errors occured in the device while either trying to process the CDP packet or adding the neighbor entry or while trying to send a CDP packet. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CTCDPCapability | INTEGER { igmp(1), rip(2), bgp(3), ospf(4), dvmrp(5), ieee8021q(6), gvrp(7), gmrp(8), igmpSnoop(9), dhcpServer(10), dnsServer(11), activeDirectory(12) } | current | The current capabilities of the neighbor device on a per port basis. |