CTRON-DLSW-MIB
80 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | MacAddress |
| CTRON-MIB-NAMES | ctDLSW |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.8.1 | NodectdlswNode | |||
| 1.3.6.1.4.1.52.4.1.2.8.1.1 | NodectdlswNodeConfig | |||
| 1.3.6.1.4.1.52.4.1.2.8.1.1.1 | ScalarctdlswVersion | read-only | mandatory | Indicates the current revision level of the DLSw firmware in textual format. |
| 1.3.6.1.4.1.52.4.1.2.8.1.1.2 | ScalarctdlswAdminStatus | read-write | mandatory | Sets the system-wide administrative state of DLSw services. |
| 1.3.6.1.4.1.52.4.1.2.8.1.1.3 | ScalarctdlswOperStatus | read-only | mandatory | Indicates the current system-wide status of DLSw services. |
| 1.3.6.1.4.1.52.4.1.2.8.1.1.4 | ScalarctdlswUpTime | read-only | mandatory | Indicates the time (in hundredths of a second) since the DLSw services portion of the system was enabled. |
| 1.3.6.1.4.1.52.4.1.2.8.1.1.5 | ScalarctdlswOperVirtualRingNumber | read-write | mandatory | Specifies the operational ring/segment number that uniquely identifies the virtual segment to which this DLSw is connected. This object may only be modified wh… |
| 1.3.6.1.4.1.52.4.1.2.8.1.1.6 | ScalarctdlswNBLocalFilterType | read-write | mandatory | Specifies the type of filtering to be applied to NetBIOS frames received on a local LAN segment. If set to block(1), any frame matching any entry in ctdlswNBLo… |
| 1.3.6.1.4.1.52.4.1.2.8.1.1.7 | ScalarctdlswNBRemoteFilterType | read-write | mandatory | Specifies the type of filtering to be applied to NetBIOS frames received from a remote DLSw partner. If set to block(1), any frame matching any entry in ctdlsw… |
| 1.3.6.1.4.1.52.4.1.2.8.1.1.8 | ScalarctdlswMacLocalFilterType | read-write | mandatory | Specifies the type of address filtering to be applied to SNA MAC frames received on a local LAN segment. If set to block(1), any frame matching any entry in ct… |
| 1.3.6.1.4.1.52.4.1.2.8.1.1.9 | ScalarctdlswMacRemoteFilterType | read-write | mandatory | Specifies the type of address filtering to be applied to SNA MAC frames received from a remote DLSw partner. If set to block(1), any frame matching any entry i… |
| 1.3.6.1.4.1.52.4.1.2.8.1.1.10 | ScalarctdlswAcceptDynamicTConn | read-write | mandatory | Specifies whether this DLSw allows unconfigured DLSw partners to establish transport connections. Yes(1) means unconfigured DLSw partners may establish transpo… |
| 1.3.6.1.4.1.52.4.1.2.8.1.1.11 | ScalarctdlswDefaultPortNumber | read-write | mandatory | Specifies the index of the port whose associated IP address will be used to identify this DLSw node to its DLSw partners. The value must be consistent with 'if… |
| 1.3.6.1.4.1.52.4.1.2.8.2 | NodectdlswPort | |||
| 1.3.6.1.4.1.52.4.1.2.8.2.1 | TablectdlswPortTable | not-accessible | mandatory | This table contains an entry for each port, and specifies configuration parameters used to establish circuits over that port. This table is indexed by ctdlswPo… |
| 1.3.6.1.4.1.52.4.1.2.8.2.1.1 | RowctdlswPortEntry | not-accessible | mandatory | Each entry specifies configuration parameters for a port for which the entry exists. |
| 1.3.6.1.4.1.52.4.1.2.8.2.1.1.1 | ColumnctdlswPortIndex | read-only | mandatory | Specifies a unique value for each port. Values are derived from 'ifIndex' of mib-II. |
| 1.3.6.1.4.1.52.4.1.2.8.2.1.1.2 | ColumnctdlswPortName | read-only | mandatory | Specifies the user friendly name for this port. |
| 1.3.6.1.4.1.52.4.1.2.8.2.1.1.3 | ColumnctdlswPortAddress | read-only | mandatory | Specifies the MAC address of this port. |
| 1.3.6.1.4.1.52.4.1.2.8.2.1.1.4 | ColumnctdlswPortAdminStatus | read-write | mandatory | Sets the administrative state of DLSw frame forwarding for this port. |
| 1.3.6.1.4.1.52.4.1.2.8.2.1.1.5 | ColumnctdlswPortOperStatus | read-only | mandatory | Specifies the current operating status of DLSw frame forwarding for this port. |
| 1.3.6.1.4.1.52.4.1.2.8.2.1.1.6 | ColumnctdlswPortUpTime | read-only | mandatory | Indicates the time (in hundredths of a second) since this port was enabled. A value of zero means this port is not presently enabled. |
| 1.3.6.1.4.1.52.4.1.2.8.3 | NodectdlswFilter | |||
| 1.3.6.1.4.1.52.4.1.2.8.3.1 | TablectdlswLocalNBFilterTable | not-accessible | mandatory | A list of NETBIOS source-destination name pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs fro… |
| 1.3.6.1.4.1.52.4.1.2.8.3.1.1 | RowctdlswLocalNBFilterEntry | not-accessible | mandatory | Information for one NetBIOS source-destination name pair. |
| 1.3.6.1.4.1.52.4.1.2.8.3.1.1.1 | ColumnctdlswLocalNBFilterSrcName | read-only | mandatory | The source NETBIOS name to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.1.1.2 | ColumnctdlswLocalNBFilterDestName | read-only | mandatory | The destination NETBIOS NAME to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.1.1.3 | ColumnctdlswLocalNBFilterControl | read-write | mandatory | Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1). |
| 1.3.6.1.4.1.52.4.1.2.8.3.2 | TablectdlswRemoteNBFilterTable | not-accessible | mandatory | A list of NETBIOS source-destination name pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs fro… |
| 1.3.6.1.4.1.52.4.1.2.8.3.2.1 | RowctdlswRemoteNBFilterEntry | not-accessible | mandatory | Information for one NetBIOS source-destination name pair. |
| 1.3.6.1.4.1.52.4.1.2.8.3.2.1.1 | ColumnctdlswRemoteNBFilterSrcName | read-only | mandatory | The source NETBIOS name to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.2.1.2 | ColumnctdlswRemoteNBFilterDestName | read-only | mandatory | The destination NETBIOS name to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.2.1.3 | ColumnctdlswRemoteNBFilterControl | read-write | mandatory | Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1). |
| 1.3.6.1.4.1.52.4.1.2.8.3.3 | TablectdlswLocalMacFilterTable | not-accessible | mandatory | A list of source-destination MAC address pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from… |
| 1.3.6.1.4.1.52.4.1.2.8.3.3.1 | RowctdlswLocalMacFilterEntry | not-accessible | mandatory | Information for one source-destination MAC address pair. |
| 1.3.6.1.4.1.52.4.1.2.8.3.3.1.1 | ColumnctdlswLocalMacFilterSrcAddr | read-only | mandatory | The source MAC Address to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.3.1.2 | ColumnctdlswLocalMacFilterSrcMask | read-only | mandatory | The source MAC Address mask to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.3.1.3 | ColumnctdlswLocalMacFilterDestAddr | read-only | mandatory | The destination MAC Address to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.3.1.4 | ColumnctdlswLocalMacFilterDestMask | read-only | mandatory | The destination MAC Address mask to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.3.1.5 | ColumnctdlswLocalMacFilterControl | read-write | mandatory | Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1). |
| 1.3.6.1.4.1.52.4.1.2.8.3.4 | TablectdlswRemoteMacFilterTable | not-accessible | mandatory | A list of source-destination MAC address pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from… |
| 1.3.6.1.4.1.52.4.1.2.8.3.4.1 | RowctdlswRemoteMacFilterEntry | not-accessible | mandatory | Information for one source-destination MAC address pair. |
| 1.3.6.1.4.1.52.4.1.2.8.3.4.1.1 | ColumnctdlswRemoteMacFilterSrcAddr | read-only | mandatory | The source MAC Address to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.4.1.2 | ColumnctdlswRemoteMacFilterSrcMask | read-only | mandatory | The source MAC Address mask to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.4.1.3 | ColumnctdlswRemoteMacFilterDestAddr | read-only | mandatory | The destination MAC Address to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.4.1.4 | ColumnctdlswRemoteMacFilterDestMask | read-only | mandatory | The destination MAC Address mask to filter on. |
| 1.3.6.1.4.1.52.4.1.2.8.3.4.1.5 | ColumnctdlswRemoteMacFilterControl | read-write | mandatory | Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1). |
| 1.3.6.1.4.1.52.4.1.2.8.4 | NodectdlswTConn | |||
| 1.3.6.1.4.1.52.4.1.2.8.4.1 | TablectdlswTConnTable | not-accessible | mandatory | A list of transport connections which are either user defined or dynamically created for this DLSw. |
| 1.3.6.1.4.1.52.4.1.2.8.4.1.1 | RowctdlswTConnEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.4.1.2.8.4.1.1.1 | ColumnctdlswTConnRemoteTAddr | read-only | mandatory | Specifies the remote transport address for this transport connection. It can be defined by the user, or established dynamically upon receiving a connection set… |
| 1.3.6.1.4.1.52.4.1.2.8.4.1.1.2 | ColumnctdlswTConnControl | read-write | mandatory | Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1). |
| 1.3.6.1.4.1.52.4.1.2.8.4.1.1.3 | ColumnctdlswTConnUpTime | read-only | mandatory | Indicates the time (in hundredths of a second) since this transport connection was last established. A value of zero means this transport connection is not pre… |
| 1.3.6.1.4.1.52.4.1.2.8.4.1.1.4 | ColumnctdlswTConnOperStatus | read-only | mandatory | Indicates the status of this transport connection. |
| 1.3.6.1.4.1.52.4.1.2.8.4.1.1.5 | ColumnctdlswTConnType | read-only | mandatory | Indicates the means by which this transport connection was determined. Configured(1) means this entry was user defined. Dynamic(2) means this entry was not use… |
| 1.3.6.1.4.1.52.4.1.2.8.5 | NodectdlswTrap | |||
| 1.3.6.1.4.1.52.4.1.2.8.6 | NodectdlswEvent | |||
| 1.3.6.1.4.1.52.4.1.2.8.6.1 | NodectdlswEventLogConfig | |||
| 1.3.6.1.4.1.52.4.1.2.8.6.1.1 | ScalarctdlswEventAdminStatus | read-write | mandatory | Set the administrative state of Data Link Switching event logging. enabled(3) causes the event log to become active. disabled(2) causes the event log to become… |
| 1.3.6.1.4.1.52.4.1.2.8.6.1.2 | ScalarctdlswEventMaxEntries | read-write | mandatory | Sets the maximum number of entries allowed in the event log table. When the number of entries reaches the value of ctdlswEventMaxEntries the first (oldest) ent… |
| 1.3.6.1.4.1.52.4.1.2.8.6.1.3 | ScalarctdlswEventTraceAll | read-write | mandatory | enabled(3) allows logging of all event types. disabled(2) causes the event log filter table to specify which events to log. |
| 1.3.6.1.4.1.52.4.1.2.8.6.2 | NodectdlswEventLogFilterTable | |||
| 1.3.6.1.4.1.52.4.1.2.8.6.2.1 | TablectdlswEventFilterTable | not-accessible | mandatory | This table contains descriptions of how to filter log entries. |
| 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1 | RowctdlswEventFilterEntry | not-accessible | mandatory | Each entry specifies the filter for log entries. The instance ctdlswEventProtocol refers to the instance used in the nwRtgProtocolTable and nwComponentTable sp… |
| 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.1 | ColumnctdlswEventFltrProtocol | read-only | mandatory | Selects the protocol to log events from. |
| 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.2 | ColumnctdlswEventFltrIfNum | read-only | mandatory | Specifies the port on which to log events. |
| 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.3 | ColumnctdlswEventFltrControl | read-write | mandatory | Setting this field to delete will allow entries to be removed from the table. This is done by adding new entries with instance fields that match the entry to b… |
| 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.4 | ColumnctdlswEventFltrType | read-write | mandatory | This bit field mask filter will allow only events of certain types to be logged. By default all types will be logged. Clearing event types from this field will… |
| 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.5 | ColumnctdlswEventFltrSeverity | read-write | mandatory | This filter controls the amount of logging by ignoring events of lower priority than that specified by the filter value. Specifying highest(1) causes all event… |
| 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.6 | ColumnctdlswEventFltrAction | read-write | mandatory | This field specifies how the events are to be logged. Specifying log(1) stores the events in the event log table (defined below). Specifying trap(2) sends even… |
| 1.3.6.1.4.1.52.4.1.2.8.6.3 | NodectdlswEventLogTable | |||
| 1.3.6.1.4.1.52.4.1.2.8.6.3.1 | TablectdlswEventTable | not-accessible | mandatory | This table contains all events that have been logged. |
| 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1 | RowctdlswEventEntry | not-accessible | mandatory | Each entry specifies events that have been logged. |
| 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.1 | ColumnctdlswEventNumber | read-only | mandatory | The number uniquely identifies events. |
| 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.2 | ColumnctdlswEventTime | read-only | mandatory | This number specifies when the event was logged. |
| 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.3 | ColumnctdlswEventType | read-only | mandatory | Specifies type of event logged. |
| 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.4 | ColumnctdlswEventSeverity | read-only | mandatory | Specifies the severity of the event logged. |
| 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.5 | ColumnctdlswEventProtocol | read-only | mandatory | Specifies the protocol where the event occured. |
| 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.6 | ColumnctdlswEventIfNum | read-only | mandatory | Specifies the port the event occurred on. |
| 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.7 | ColumnctdlswEventTextString | read-only | mandatory | Specifies the actual text string to be logged. |