CTRON-ENVIRONMENT-MIB
48 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-MIB-NAMES | ctenv |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.8.1 | NodechEnv | |||
| 1.3.6.1.4.1.52.4.1.1.8.1.1 | ScalarchEnvAmbientTemp | read-only | mandatory | The ambient temperature of the room in which the chassis is located. If this sensor is broken or not supported, then this object will be set to zero. The value… |
| 1.3.6.1.4.1.52.4.1.1.8.1.2 | ScalarchEnvAmbientStatus | read-only | mandatory | This object reflects the status of the ambient temperature reading. |
| 1.3.6.1.4.1.52.4.1.1.8.1.3 | ScalarchEnvHumidity | read-only | mandatory | The humidity value of the air flowing thru the chassis. The value of this object is the actual humidity * 10. |
| 1.3.6.1.4.1.52.4.1.1.8.1.4 | ScalarchEnvHumidityStatus | read-only | mandatory | This object reflects the status of the ambient humidity reading. |
| 1.3.6.1.4.1.52.4.1.1.8.1.5 | ScalarchEnvAmbientHot | read-only | mandatory | The temperature value above which the ambient temperature is deemed to be hot. |
| 1.3.6.1.4.1.52.4.1.1.8.1.6 | ScalarchEnvAmbientWarm | read-only | mandatory | The temperature value above which the ambient temperature is deemed to be warm, if it is below or equal the hot value. |
| 1.3.6.1.4.1.52.4.1.1.8.1.7 | ScalarchEnvAmbientCool | read-only | mandatory | The temperature value below which the ambient temperature is deemed to be cool, if it is above or equal the cold value. |
| 1.3.6.1.4.1.52.4.1.1.8.1.8 | ScalarchEnvAmbientCold | read-only | mandatory | The temperature value below which the ambient temperature is deemed to be cold. |
| 1.3.6.1.4.1.52.4.1.1.8.1.9 | ScalarchEnvHumidityMoist | read-only | mandatory | The humidity value above which the chassis humidity is deemed to be moist. |
| 1.3.6.1.4.1.52.4.1.1.8.1.10 | ScalarchEnvHumidityDry | read-only | mandatory | The humidity value below which the chassis humidity is deemed to be a static risk. |
| 1.3.6.1.4.1.52.4.1.1.8.1.11 | ScalarchEnvNumFans | read-only | mandatory | Number of fans in a chassis. |
| 1.3.6.1.4.1.52.4.1.1.8.1.12 | TablechEnvFanTable | not-accessible | mandatory | A list of fans installed in this chassis. |
| 1.3.6.1.4.1.52.4.1.1.8.1.12.1 | RowchEnvFanEntry | not-accessible | mandatory | A slot entry containing objects for a particular module. |
| 1.3.6.1.4.1.52.4.1.1.8.1.12.1.1 | ColumnchEnvFanID | read-only | mandatory | A unique value, in the range between 1 and and the value of chEnvNumFans. |
| 1.3.6.1.4.1.52.4.1.1.8.1.12.1.2 | ColumnchEnvFanStatus | read-only | mandatory | This object reflects the status of the chassis fan. |
| 1.3.6.1.4.1.52.4.1.1.8.1.12.1.3 | ColumnchEnvFanAdmin | read-write | mandatory | This object is used to select the operational mode of the fan. If the value is set to 1 (auto) then fan speed is based on temperature. If the value is set to 3… |
| 1.3.6.1.4.1.52.4.1.1.8.1.12.1.4 | ColumnchEnvFanSpeed | read-only | mandatory | The fan speed expressed as a percentage of the maximum fan speed. |
| 1.3.6.1.4.1.52.4.1.1.8.2 | NodeboardEnv | |||
| 1.3.6.1.4.1.52.4.1.1.8.2.1 | TableboardEnvSlotTable | not-accessible | mandatory | A list of networking modules installed in this chassis. |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1 | RowboardEnvSlotEntry | not-accessible | mandatory | A slot entry containing objects for a particular module. |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.1 | ColumnboardEnvSlotID | read-only | mandatory | The slot number of a chassis slot in which this board is installed. This object is similiar to chSlotID in the Chassis MIB. |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.2 | ColumnboardEnvTemp | read-only | mandatory | The temperature of the networking board. If this sensor is broken or not supported, then this object will be set to zero. The temperature is in degrees Fahrenh… |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.3 | ColumnboardEnvTempStatus | read-only | mandatory | This object reflects the status of the board temperature reading. |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.4 | ColumnboardEnvTempRelStatus | read-only | mandatory | This object reflects the status of the board temperature reading relative to the ambient temperature. |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.5 | ColumnboardEnvShutdownAdmin | read-write | mandatory | This object enables or disables the auto shutdown due to a temperature condition. |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.6 | ColumnboardEnvTempHot | read-only | mandatory | The temperature value above which the board temperature is deemed to be hot. |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.7 | ColumnboardEnvTempWarm | read-only | mandatory | The temperature value above which the board temperature is deemed to be warm, if it is below or equal the hot value. |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.8 | ColumnboardEnvTempCool | read-only | mandatory | The temperature value below which the board temperature is deemed to be cool, if it is above or equal the cold value. |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.9 | ColumnboardEnvTempCold | read-only | mandatory | The temperature value below which the board temperature is deemed to be cold. |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.10 | ColumnboardEnvTempRelHot | read-only | mandatory | The temperature value above ambient at which the board temperature is deemed to be hot relative to ambient. |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.11 | ColumnboardEnvTempRelWarm | read-only | mandatory | The temperature value above ambient at which the board temperature is deemed to be warm relative to ambient, if it is below the relative hot value of boardEnvT… |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.12 | ColumnboardEnvTempMaxFanRelHot | read-only | mandatory | The temperature value above ambient at which the board temperature is deemed to be hot relative to ambient, with all fans in the chassis running at there maxim… |
| 1.3.6.1.4.1.52.4.1.1.8.2.1.1.13 | ColumnboardEnvTempMaxFanRelWarm | read-only | mandatory | The temperature value above ambient at which the board temperature is deemed to be warm relative to ambient, if it is below the relative hot value of boardEnvT… |
| 1.3.6.1.4.1.52.4.1.1.8.3 | NodepsEnv | |||
| 1.3.6.1.4.1.52.4.1.1.8.3.1 | TablepsEnvSlotTable | not-accessible | mandatory | A list of networking modules installed in this chassis. |
| 1.3.6.1.4.1.52.4.1.1.8.3.1.1 | RowpsEnvSlotEntry | not-accessible | mandatory | A slot entry containing objects for a particular module. |
| 1.3.6.1.4.1.52.4.1.1.8.3.1.1.1 | ColumnpsEnvSlotID | read-only | mandatory | The slot number of a chassis slot in which this power supply is installed. An unique value, in the range between 1 and and the value of chNumSlots. This object… |
| 1.3.6.1.4.1.52.4.1.1.8.3.1.1.2 | ColumnpsEnvTemp | read-only | mandatory | The temperature of the power supply. If this sensor is broken or not supported, then this object will be set to zero. The temperature is in degrees Fahrenheit … |
| 1.3.6.1.4.1.52.4.1.1.8.3.1.1.3 | ColumnpsEnvTempStatus | read-only | mandatory | This object reflects the status of the power supply temperature reading. |
| 1.3.6.1.4.1.52.4.1.1.8.3.1.1.4 | ColumnpsEnvTempHot | read-only | mandatory | The temperature value above which the power supply temperature is deemed to be hot. |
| 1.3.6.1.4.1.52.4.1.1.8.3.1.1.5 | ColumnpsEnvTempWarm | read-only | mandatory | The temperature value above which the power supply temperature is deemed to be warm, if it is below or equal the hot value. |
| 1.3.6.1.4.1.52.4.1.1.8.3.1.1.6 | ColumnpsEnvTempCool | read-only | mandatory | The temperature value below which the power supply temperature is deemed to be cool, if it is above or equal the cold value. |
| 1.3.6.1.4.1.52.4.1.1.8.3.1.1.7 | ColumnpsEnvTempCold | read-only | mandatory | The temperature value below which the power supply temperature is deemed to be cold. |
| 1.3.6.1.4.1.52.4.1.1.8.3.1.1.8 | ColumnpsEnvFanStatus | read-only | mandatory | This object reflects the status of the chassis fan. |
| 1.3.6.1.4.1.52.4.1.1.8.3.1.1.9 | ColumnpsEnvFanAdmin | read-write | mandatory | This object is used to select the operational mode of the fan. If the value is set to 1 (auto) then fan speed is based on temperature. If the value is set to 3… |
| 1.3.6.1.4.1.52.4.1.1.8.3.1.1.10 | ColumnpsEnvFanSpeed | read-only | mandatory | The fan speed expressed as a percentage of the maximum fan speed. |
| 1.3.6.1.4.1.52.4.1.1.8.4 | NodebbuEnv |