CTRON-ETHERNET-PARAMETERS-MIB
29 objects
No module-level DESCRIPTION found.
Imported Objects
| CTIF-EXT-MIB | ctIfPortIfNumber ctIfPortPortNumber |
| CTRON-MIB-NAMES | ctEthernetCtlParameters |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.4.2.1 | NodectAutoNegCtl | |||
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1 | TablectAutoNegCtlTable | not-accessible | mandatory | Provides a list of definitions and control objects over any 10BASE-T, 100BASE-TX, or 1000BASE-X Cabletron interface that supports auto-negotiation as described… |
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1 | RowctAutoNegCtlEntry | not-accessible | mandatory | Defines a particular entry containing objects pertaining to definition and control over interfaces supporting Auto-Negotiation. |
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.1 | ColumnctAutoNegAdminStatus | read-write | mandatory | This object controls whether Auto-Negotiation is enabled for the specified port. If Auto-Negotiation is disabled the port will revert to the speed, duplex and … |
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.2 | ColumnctAutoNegRemoteSignalling | read-only | mandatory | This object indicates whether the remote end of the link is operating Auto-Negotiation signalling or not. |
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.3 | ColumnctAutoNegAutoConfig | read-only | mandatory | This object indicates whether Auto-Negotiation signalling is in progress or has completed. |
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.4 | ColumnctAutoNegLocalTechnologyAbility | read-only | mandatory | This indicates the technology ability of the local hardware. The value is a sum. This sum initially takes the value zero. Then, for each technology, T, that th… |
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.5 | ColumnctAutoNegAdvertisedTechnologyAbility | read-write | mandatory | Indicates the advertised ability of the local hardware, but only becomes active on ports that have auto-negotiation enabled. The value is a sum. This sum initi… |
| 1.3.6.1.4.1.52.4.1.2.4.2.1.1.1.6 | ColumnctAutoNegReceivedTechnologyAbility | read-only | mandatory | Indicates the advertised ability of the remote hardware, or link partner. The value is a sum. This sum initially takes the value zero. Then, for each technolog… |
| 1.3.6.1.4.1.52.4.1.2.4.2.2 | NodectFlowControl | |||
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1 | TablectFlowCtlTable | not-accessible | mandatory | Provides a list of statistic and control objects over 10BASE-X, 100BASE-X and 1000BASE-X Cabletron interfaces that support flow control as described by IEEE St… |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1 | RowctFlowCtlEntry | not-accessible | mandatory | Defines a particular entry containing objects pertaining to definition and control over Cabletron flow control capable interfaces. |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.1 | ColumnctFlowCtlHalfDuplexAdminStatus | read-write | mandatory | The administrative status requested by management for back pressure on this port. Back pressure is a collision based flow control mechanism used in half duplex… |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.2 | ColumnctFlowCtlHalfDuplexOperStatus | read-only | mandatory | The current operational status of back pressure on this port. |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.3 | ColumnctEtherSupportedPauseModes | read-only | mandatory | This indicates the frame based modes of full duplex flow control for this port. The value is a sum. This sum initially takes the value zero. Then, for each mod… |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.4 | ColumnctFlowCtlPauseAdminStatus | read-write | mandatory | The administrative status requested by management for frame based flow control on this port. For 10 Mb and 100 Mb ports the value of symmetric(1) indicates tha… |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.5 | ColumnctFlowCtlPauseOperStatus | read-only | mandatory | The current operational status of full duplex flow control on this port. A value of unknown(5) will be returned for any port which has a Pause Frame Admin Stat… |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.6 | ColumnctFlowCtlPauseTimer | read-only | mandatory | A 2 octet, unsigned integer containing the length of time for which the receiving station is requested to inhibit data frame transmission. The pause time is me… |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.7 | ColumnctFlowCtlRxPauseFrames | read-only | mandatory | The number of pause frames received on this port. |
| 1.3.6.1.4.1.52.4.1.2.4.2.2.1.1.8 | ColumnctFlowCtlTxPauseFrames | read-only | mandatory | The number of pause frames transmitted from this port. |
| 1.3.6.1.4.1.52.4.1.2.4.2.3 | NodectEtherManualConfig | |||
| 1.3.6.1.4.1.52.4.1.2.4.2.3.1 | TablectEtherManualConfigTable | not-accessible | mandatory | Provides a list of speed and duplex control objects over 10BASE-X, 100BASE-X and 1000 BASE-X Cabletron Ethernet interfaces. |
| 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1 | RowctEtherManualConfigEntry | not-accessible | mandatory | Defines a particular entry containing objects pertaining to definition and control over Cabletron Ethernet interfaces. |
| 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1.1 | ColumnctEtherSupportedSpeed | read-only | mandatory | This indicates the supported speeds for the port. The value is a sum. This sum initially takes the value zero. Then, for each speed, S, that the port supports,… |
| 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1.2 | ColumnctEtherSpeedAdminStatus | read-write | mandatory | The administrative status requested by management for the speed of this port. The value of tenmegabit(2) indicates that if Auto-Negotiation is disabled for thi… |
| 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1.3 | ColumnctEtherSpeedOperStatus | read-only | mandatory | This object indicates the current speed of the Ethernet port. |
| 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1.4 | ColumnctEtherSupportedDuplex | read-only | mandatory | This object indicates the duplex modes supported by this port. A value of halfduplex(1) indicates that the port only supports half duplex operation. A value of… |
| 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1.5 | ColumnctEtherDuplexAdminStatus | read-write | mandatory | The administrative status requested by management for the duplex of this port. The value of halfduplex(2) indicates that if Auto-Negotiation is disabled for th… |
| 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1.6 | ColumnctEtherDuplexOperStatus | read-only | mandatory | This object indicates the current duplex of the Ethernet port. |