CTRON-FDDI-STAT-MIB
18 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-MIB-NAMES | ctFDDIStats |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.5.2.1 | NodectFDDIStatsUtil | |||
| 1.3.6.1.4.1.52.4.1.2.5.2.1.1 | TablectFDDIStatsCtlTable | not-accessible | mandatory | This table allows control over the creation of FDDI utilization statistics. This is done by providing an object that when accessed latches the statistics into … |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.1.1 | RowctFDDIStatsCtlEntry | not-accessible | mandatory | Defines a specific control entry. |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.1.1.1 | ColumnctFDDISlot | read-only | mandatory | A specific slot for which this connection entry is defined. If the entry corresponds to a slotless chassis system, then this entry will have the value of 0. |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.1.1.2 | ColumnctFDDISMT | read-only | mandatory | A specific instance of SMT for which this entry pertains. |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.1.1.3 | ColumnctFDDIPath | read-only | mandatory | A specific FDDI Path that this connection entry pertains. |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.1.1.4 | ColumnctFDDINextEntry | read-only | mandatory | Provides an identifier of the next entry to be used in the ctFDDIStatsHistoryTable. Reading this object will latch FDDI performance data into a conceptual row … |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.1.1.5 | ColumnctFDDIResetPeak | read-write | mandatory | This object provides the ability to reset the peak bytes and peak time stamp object. This is accomplished by setting this object with a value of reset(2). Sett… |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.2 | TablectFDDIStatsHistoryTable | not-accessible | mandatory | Provides a history of latched FDDI performance objects. There is one such object for each entry that has been latched in the ctFDDIStatsCtlTable. This table wi… |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.2.1 | RowctFDDIStatsHistoryEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.2.1.1 | ColumnctFDDIStatsIndex | read-only | mandatory | A unique entry that identifies a particular latched stats entry. This corresponds directly to a value of ctFDDINextEntry. |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.2.1.2 | ColumnctFDDIStatsTimeStamp | read-only | mandatory | The value of sysUpTime when this entry was created. |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.2.1.3 | ColumnctFDDIFrames | read-only | mandatory | The bandwidth utilization in frames per second. |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.2.1.4 | ColumnctFDDIBytes | read-only | mandatory | The bandwidth utilization in bytes per second. |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.2.1.5 | ColumnctFDDIPeakBytes | read-only | mandatory | The peak bandwidth utilization in bytes per second. |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.2.1.6 | ColumnctFDDIPeakTime | read-only | mandatory | A time stamp when the peak occured. |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.2.1.7 | ColumnctFDDIStatsSMT | read-only | mandatory | The FDDI SMT index for which these statistics pertain. The value of the object must match a corresponding value of ctFDDISMT. |
| 1.3.6.1.4.1.52.4.1.2.5.2.1.2.1.8 | ColumnctFDDIStatsPath | read-only | mandatory | The FDDI MAC path index for which these statistics pertain. The value of the object must match a corresponding value of ctFDDIPath. |