CTRON-IF-REMAP-2-MIB
29 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-MIB-NAMES | ctIFRemap2 |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.14.1 | NodectIFRemap2Config | |||
| 1.3.6.1.4.1.52.4.1.1.14.1.1 | TablectIFRemap2Table | not-accessible | mandatory | This table provides the ability to remap all frames from one port onto another port. A port is defined by ctIFRemap2PortIndex from the ctIFRemap2PortTable belo… |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1 | RowctIFRemap2Entry | not-accessible | mandatory | Describes a particular ifremap entry. |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1.1 | ColumnctIFRemap2SourceSlot | read-only | mandatory | The slot combined with the ctIFRemap2SourcePort which will have all packets redirected to the destination port as defined by ctIFRemap2DestSlot and ctIFRemap2D… |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1.2 | ColumnctIFRemap2SourcePort | read-only | mandatory | The port combined with the ctIFRemap2SourceSlot which will have all packets redirected to the destination port as defined by ctIFRemap2DestSlot and ctIFRemap2D… |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1.3 | ColumnctIFRemap2DestSlot | read-only | mandatory | The slot combined with the ctIFRemap2DestPort which will see all packets redirected from ctIFRemap2SourceSlot and ctIFRemap2SourcePort. |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1.4 | ColumnctIFRemap2DestPort | read-only | mandatory | The port combined with the ctIFRemap2DestSlot which will see all packets redirected from ctIFRemap2SourceSlot and ctIFRemap2SourcePort. |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1.5 | ColumnctIFRemap2Status | read-write | mandatory | Defines the status of the ifremap entry. Setting ctIFRemap2Status to a value of enable(1) has the effect of creating an entry in the table when it does not alr… |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1.6 | ColumnctIFRemap2PhysicalErrors | read-write | mandatory | Enable or disable remapping of physical errors. This object controls whether or not frames with physical errors should be remapped out the destination port for… |
| 1.3.6.1.4.1.52.4.1.1.14.1.1.1.7 | ColumnctIFRemap2EgressType | read-write | mandatory | Defines how each packet will be tagged when sent out the ctIFRemap2DestPort. Setting ctIFRemap2EgressType to normal(1) will set packets to be sent out as they … |
| 1.3.6.1.4.1.52.4.1.1.14.1.2 | TablectIFRemap2PortTable | not-accessible | mandatory | This table holds all valid ports that are remappable or able to accept a remapped packet. |
| 1.3.6.1.4.1.52.4.1.1.14.1.2.1 | RowctIFRemap2PortEntry | not-accessible | mandatory | Describes a particular supported remappable port. |
| 1.3.6.1.4.1.52.4.1.1.14.1.2.1.1 | ColumnctIFRemap2PortSlot | read-only | mandatory | Defines the slot in which the remap capable module resides. In the case of a stand-alone device the slot will always be 1. |
| 1.3.6.1.4.1.52.4.1.1.14.1.2.1.2 | ColumnctIFRemap2PortIndex | read-only | mandatory | Defines an port that is remappable or is able to accept a remapped packet. Ideally indices will start with 1 and will be numbered continuously through the numb… |
| 1.3.6.1.4.1.52.4.1.1.14.1.2.1.3 | ColumnctIFRemap2PortReference | read-only | mandatory | This object returns an OID referencing an object which uniquely corresponds to this remap port. The only criteria is that this OID is a leaf, and that it exist… |
| 1.3.6.1.4.1.52.4.1.1.14.1.2.1.4 | ColumnctIFRemap2PhysErrsCapable | read-only | mandatory | Indicate whether the port is incapable of remapping physical errors. If the capability is supported, this object will return supported(1). If the capability is… |
| 1.3.6.1.4.1.52.4.1.1.14.1.3 | TablectIFRemap2SlotTable | not-accessible | mandatory | This table contains all information pertaining to the abilities or limitations of a particular remap capable module. |
| 1.3.6.1.4.1.52.4.1.1.14.1.3.1 | RowctIFRemap2SlotEntry | not-accessible | mandatory | Describes a particular entry in the ctIFRemap2SlotTable. Each entry is indexed by the physical slot in which the module resides. |
| 1.3.6.1.4.1.52.4.1.1.14.1.3.1.1 | ColumnctIFRemap2SlotIndex | read-only | mandatory | Defines the slot in which the remap capable module resides. In the case of a stand-alone device the slot will always be 1. |
| 1.3.6.1.4.1.52.4.1.1.14.1.3.1.2 | ColumnctIFRemap2SlotMaxRemaps | read-only | mandatory | The maximum number of entries allowed to be sourced from the module in this slot in the ctIFRemap2Table. |
| 1.3.6.1.4.1.52.4.1.1.14.1.3.1.3 | ColumnctIFRemap2SlotMaxRemoteDests | read-only | mandatory | The maximum number of remote destination ports per remote module. For example, a value of 3 means that I can have no more than 3 remap destination ports betwee… |
| 1.3.6.1.4.1.52.4.1.1.14.1.4 | TablectIFRemap2VlanTable | not-accessible | mandatory | This table provides the ability to remap all frames from any port on a particular vlan to a specific destination port. Each row that exists in this table defin… |
| 1.3.6.1.4.1.52.4.1.1.14.1.4.1 | RowctIFRemap2VlanEntry | not-accessible | mandatory | Describes a particular ifremap Vlan entry. |
| 1.3.6.1.4.1.52.4.1.1.14.1.4.1.1 | ColumnctIFRemap2VlanSourceSlot | read-only | mandatory | The slot combined with the ctIFRemap2VlanSourceVlan which will have all packets redirected to the destination port as defined by ctIFRemap2VlanDestSlot and ctI… |
| 1.3.6.1.4.1.52.4.1.1.14.1.4.1.2 | ColumnctIFRemap2VlanSourceVlan | read-only | mandatory | The vlan combined with the ctIFRemap2VlanSourceSlot which will have all packets redirected to the destination port as defined by ctIFRemap2VlanDestSlot and ctI… |
| 1.3.6.1.4.1.52.4.1.1.14.1.4.1.3 | ColumnctIFRemap2VlanDestSlot | read-only | mandatory | The slot combined with the ctIFRemap2VlanDestPort which will see all packets redirected from ctIFRemap2VlanSourceSlot and ctIFRemap2VlanSourceVlan. |
| 1.3.6.1.4.1.52.4.1.1.14.1.4.1.4 | ColumnctIFRemap2VlanDestPort | read-only | mandatory | The port combined with the ctIFRemap2VlanDestSlot which will see all packets redirected from ctIFRemap2VlanSourceSlot and ctIFRemap2VlanSourceVlan. |
| 1.3.6.1.4.1.52.4.1.1.14.1.4.1.5 | ColumnctIFRemap2VlanStatus | read-write | mandatory | Defines the status of the ifremap vlan entry. Setting ctIFRemap2VlanStatus to a value of enable(1) has the effect of creating an entry in the table when it doe… |
| 1.3.6.1.4.1.52.4.1.1.14.1.4.1.6 | ColumnctIFRemap2VlanEgressType | read-write | mandatory | Defines how each packet will be tagged when sent out the ctIFRemap2VlanDestPort. Setting ctIFRemap2VlanEgressType to received(1) will set packets to be sent ou… |