CTRON-REMOTE-ACCESS-MIB
210 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52 | Nodecabletron | |||
| 1.3.6.1.4.1.52.4 | Nodemibs | |||
| 1.3.6.1.4.1.52.4.1 | Nodectron | |||
| 1.3.6.1.4.1.52.4.1.2 | NodectDataLink | |||
| 1.3.6.1.4.1.52.4.1.2.7 | NodectronWan | |||
| 1.3.6.1.4.1.52.4.1.2.7.2 | NodectRemoteAccess | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.1 | NodectRemoteConnection | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.1.1 | ScalarctRemNumConnections | read-only | mandatory | This object describes the number of physical remote access connections on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2 | TablectRemPhysPortTable | not-accessible | mandatory | A list of the descriptions of the physical remote access ports of this platform. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1 | RowctRemPhysPortEntry | not-accessible | mandatory | A physical port entry. It contains objects relating to a given physical remote access port |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.1 | ColumnctRemConnectionIndex | read-only | mandatory | A value indicating the remote connection this entry is located on. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.2 | ColumnctRemPhysPortType | read-only | mandatory | The type of physical port that this entry describes. None indicates that the physical port has no connector. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.3 | ColumnctRemPhysPortSpecificMib | read-only | mandatory | This object identifies an instance of the index object in the first group of objects in the MIB specific to the physical port. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.4 | ColumnctRemPhysPortProtMgrType | read-write | mandatory | This object identifies an instance of the type of Protocol Manager residing on this physical port. Before a physical port may be used, the type of manager must… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.5 | ColumnctRemPhysPortProtMgrIfaceNum | read-write | mandatory | This object identifies the interface number that will be assigned to the Protocol Managers IFO |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.6 | ColumnctRemPhysPortWanIfaceNum | read-only | mandatory | This object identifies the interface number that will be assigned to the Wanio's IFO |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.7 | ColumnctRemPhysPortProtMgrMaxIfos | read-write | mandatory | This object identifies the maximum number of IFO's that can be created on this physical interface. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.8 | ColumnctRemPhysPortProtMgrIfaceList | read-only | mandatory | This object identifies a list of interfaces that will be assigned to this Protocol Managers data IFO's |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.9 | ColumnctRemPhysAlarmTimeOut | read-write | mandatory | Whenever the physical port is configured for nailed-up PPP this object specifies the time the physical port must remain in a failed state as a condition to beg… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.10 | ColumnctRemPhysWpimType | read-write | mandatory | This Mib object determines the Mode of operation that the T1/DDS Wpim module will function as. Setting a value of 1 will set the mode to DDS, setting a value o… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3 | TablectRemInterfaceTable | not-accessible | mandatory | The interface table for Cabletron remote interfaces. It is a list of items that are pertinant to the interfaces that are part of remote physical ports. The num… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1 | RowctRemInterfaceEntry | not-accessible | mandatory | A remote interface entry. It contains objects relating to an interface that is defined for remote Cabletron products. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.1 | ColumnctRemIntEntIfIndex | read-only | mandatory | The ifIndex of the interface. This is the index of this entry in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.2 | ColumnctRemIntEntCompression | read-write | mandatory | This flag will indicate whether compression should take place on this interface. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.3 | ColumnctRemIntEntCompRatio | read-only | mandatory | This string indicates the current compression ratio on this interface. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.4 | ColumnctRemIntEntCompStatus | read-only | mandatory | This flag will indicate whether compression has been nogotiated on this interface. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.5 | ColumnctRemIntEntMTU | read-write | mandatory | The MTU to be negotiated for this interface. This will not be updated with the actual MTU, which can be found in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.6 | ColumnctRemIntEntCongestion | read-write | mandatory | This object identifies the Leaky Bucket algorithm flag for a Frame Relay circuit on this intertface. The option is supported when this flag is enabled, and not… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.7 | ColumnctRemIntEntMaxProfiles | read-write | mandatory | This object specifies the maximum number of neighbor profiles. A neighbor profile describes a possible connection. The maximum should be set to account for sup… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.8 | ColumnctRemIntEntTxIdleTimeout | read-write | mandatory | This object identifies the idle timeout value in which a packet needs to be transmitted before the interface is automatically disconnected. Allowed values are … |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.9 | ColumnctRemIntEntRxIdleTimeout | read-write | mandatory | This object identifies the idle timeout in which a packet needs to be received before the interface is automatically disconnected. Allowed values are in increm… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.10 | ColumnctRemIntEntCircuitName | read-write | mandatory | This object associates a circuit name with a specific interface. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.11 | ColumnctRemIntEntEncryption | read-write | mandatory | This flag will indicate whether encryption should take place on this interface. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.12 | ColumnctRemIntEntEncryptStatus | read-only | mandatory | This flag will indicate whether Encryption has been nogotiated on this interface. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.4 | TablectRemPrimaryInterfaceTable | not-accessible | mandatory | The interface table for Cabletron remote interfaces. It is a list of items that are pertinant to the interfaces that are part of remote physical ports. The num… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.4.1 | RowctRemPrimaryInterfaceEntry | not-accessible | mandatory | A remote interface entry. It contains objects relating to an interface that is defined for remote Cabletron products. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.4.1.1 | ColumnctRemPriIntEntIfIndex | read-only | mandatory | The ifIndex of the interface. This is the index of this entry in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.4.1.2 | ColumnctRemPriIntEntConnectRetryInterval | read-write | mandatory | This object specifies the interval in seconds between retries for restoring the primary interface. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.5 | TablectRemBackupInterfaceTable | not-accessible | mandatory | The interface table for Cabletron remote interfaces. It is a list of items that are pertinant to the interfaces that are part of remote physical ports. The num… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1 | RowctRemBackupInterfaceEntry | not-accessible | mandatory | A remote interface entry. It contains objects relating to an interface that is defined for remote Cabletron products. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.1 | ColumnctRemIntEntBackupIfIndex | read-only | mandatory | The ifIndex of the interface. This is the index of this entry in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.2 | ColumnctRemIntEntBackupIfNum | read-write | mandatory | This object identifies which ifIndex will backup this interface in the event of a communications failure. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.3 | ColumnctRemIntEntBackupIfInUseCnt | read-only | mandatory | This object identifies how many other interfaces this interface will backup. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.4 | ColumnctRemIntEntBackupIfTimeToConnect | read-write | mandatory | This object identifies how long to wait in seconds before attempting to switchover to the backup interface. Allowed values are in increments of five seconds in… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.5 | ColumnctRemIntEntBackupIfTimeToDisconnect | read-write | mandatory | This object identifies how long to wait in seconds before attempting to switchover to the primary interface. Allowed values are in increments of five seconds i… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.6 | ColumnctRemIntEntBackupIfOverride | read-write | mandatory | This object identifies if the interface will switch back to the primary link after it has become active again. A force condition will not allow the interface t… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.7 | ColumnctRemIntEntBackupConnectRetries | read-write | mandatory | This object specifies the number of tries to bring-up the backup interface before giving up. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.8 | ColumnctRemIntEntBackupConnectRetryInterval | read-write | mandatory | This object specifies the interval in seconds between retries for bringing up backup interface before giving up. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.6 | TablectRemExtPhysPortTable | not-accessible | mandatory | A list of the descriptions of the physical remote access ports of this platform. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1 | RowctRemExtPhysPortEntry | not-accessible | mandatory | A physical port entry. It contains objects relating to a given physical remote access port |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.1 | ColumnctRemExtConnectionIndex | read-only | mandatory | A value indicating the remote connection this entry is located on. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.2 | ColumnctRemExtProtMgrIndex | read-only | mandatory | A value indicating the protMgr number for this entry. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.3 | ColumnctRemExtPhysPortProtMgrType | read-write | mandatory | This object identifies an instance of the type of Protocol Manager residing on this physical port. Before a physical port may be used, the type of manager must… |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.4 | ColumnctRemExtPhysPortProtMgrEnable | read-write | mandatory | This object identifies an instance of the the enable flag of Protocol Manager residing on this physical port. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.5 | ColumnctRemExtPhysPortProtMgrIfaceNum | read-write | mandatory | This object identifies the interface number that will be assigned to the Protocol Managers IFO |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.6 | ColumnctRemExtPhysPortProtMgrMaxIfos | read-write | mandatory | This object identifies the maximum number of IFO's that can be created on this physical interface. |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.7 | ColumnctRemExtPhysPortProtMgrIfaceList | read-only | mandatory | This object identifies a list of interfaces that will be assigned to this Protocol Managers data IFO's |
| 1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.8 | ColumnctRemExtPhysPortProtMgrChannelList | read-only | mandatory | This object identifies a list of channles/timeslots that will be assigned to this Protocol Managers data IFO's |
| 1.3.6.1.4.1.52.4.1.2.7.2.2 | NodectDs1Ext | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1 | TablectDs1ExtensionsTable | not-accessible | mandatory | This table is an extension to the standard ds1 configuration table. It is a list of items that are pertinant to ds1 ports on a platform. There is one entry per… |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1 | RowctDs1ExtensionsEntry | not-accessible | mandatory | A ds1 extensions entry containing objects relating to the particular ds1 physical port. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.1 | ColumnctDs1ExtensionsEntryIndex | read-only | mandatory | A unique value for each ds1 physical port on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.2 | ColumnctDs1ExtensionsNumInterfaces | read-only | mandatory | The number of interfaces on this physical port. This number inidicates the number of entries this physical port uses in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.3 | ColumnctDs1ExtensionsToggleFracTable | read-write | mandatory | Setting this object to 1 will cause the Ds1 Fractional Table to be updated with the new values, as entered. Setting this object to 2, will cause the Ds1 Fracti… |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.4 | ColumnctDs1ExtensionsLineBuildOut | read-write | mandatory | The line build out setting for this ds1 physical port. Unknown indicates that the setting is neither readable or writable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.5 | ColumnctDs1ExtensionsCFADuration | read-write | mandatory | The length of time (in seconds), that the ds1 port will remain in the Carrier Failure Alarm state after the alarm condition has cleared. For those Ds1 ports no… |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.6 | ColumnctDs1ExtensionsDIEnable | read-write | mandatory | Enables or disables Drop and Insert functionality on a D/I WPIM. If enabled, all zero assigned timeslots will designate D/I interface channels, if disabled all… |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.7 | ColumnctDs1ExtensionsTotalValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected for the DS1 mib, which is currently RFC1406. This counter is similar to RFC1406 dsx1ValidIn… |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.8 | ColumnwanDs1ExtensionsBertTestMode | read-write | mandatory | This object is used to request that a type of process be in control of the testing function. This is used to differentiate between automated test procedures an… |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.9 | ColumnwanDs1ExtensionsBertRun | read-write | mandatory | Controls the sending of test data over this physical port. The data is a pattern described by wanDs1ExtensionsBertTestPattern. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.10 | ColumnwanDs1ExtensionsBertCurrentResults | read-only | mandatory | Indicates the results of the testing for the last completed sampling period. A non-negative number is the error rate in bits per million bits. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.11 | ColumnwanDs1ExtensionsBertCumulativeResults | read-only | mandatory | Indicates the total number of errors since the testing was enabled. It is not a rate. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.12 | ColumnwanDs1ExtensionsBertPeakResults | read-only | mandatory | Indicates the highest value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the error rate in bits per million bi… |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.13 | ColumnwanDs1ExtensionsBertAverageResult | read-only | mandatory | Indicates the average value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the error rate in bits per million bi… |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.14 | ColumnwanDs1ExtensionsBertTestPattern | read-write | mandatory | This object is used to specify the pattern of the test data. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.15 | ColumnwanDs1ExtensionsBertSamplePeriod | read-write | mandatory | This object is the duration of time in seconds at which the current test results will be periodically written to wanDs1ExtensionsBertCurrentResults. The range … |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.16 | ColumnwanDs1ExtensionsBertNumPeriods | read-only | mandatory | The number of sampling periods that have elapsed during the current test run. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.17 | ColumnwanDs1ExtensionsBertTestTraps | read-write | mandatory | This object is used to enable or disable the sending of a trap at the conclusion of the measurement period. The trap will contain the information described by … |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.18 | ColumnwanDs1ExtensionsBertDataStatus | read-only | mandatory | This object provides the operating status of the transmission of test data packets. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.2 | TablectDs1WanDriverTable | not-accessible | mandatory | This table is an extension to the standard ds1 configuration table. It is a list of items that are pertinant to the hdlc driver on a platform. There is one ent… |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.2.1 | RowctDs1WanDriverEntry | not-accessible | mandatory | A ds1 wan driver entry containing objects relating to the particular ds1 physical port pertaining to a specific channel on the wan driver chip. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.1 | ColumnctDs1WanDriverEntryIndex | read-only | mandatory | A unique value for each ds1 physical port on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.2 | ColumnctDs1WanDriverChannelIndex | read-only | mandatory | A unique value for each channel on a wan driver on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.3 | ColumnctDs1WanDriverLineCode | read-write | mandatory | This object controls the individual channels line coding on a wan driver device on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.4 | ColumnctDs1WanDriverCRCBits | read-write | mandatory | This object controls the individual channels CRC bits generation on a wan driver device on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.2.3 | NodectRs232Ext | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.3.1 | TablectRs232ExtensionsTable | not-accessible | mandatory | This table is an extension to the standard rs232-like mib. It is a list of items that are pertinant to rs232-like ports on a platform. There is one entry per s… |
| 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1 | RowctRs232ExtensionsEntry | not-accessible | mandatory | A rs232-like extensions entry containing objects relating to the particular rs232-like physical port. |
| 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.1 | ColumnctRs232ExtensionsEntryIndex | read-only | mandatory | A unique value for each rs232-like physical port on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.2 | ColumnctRs232ExtensionsCTSEnable | read-write | mandatory | This object indicates whether the platform should generate CTS. When disabled the platform will not generate CTS, when enabled, the platform will generate CTS.… |
| 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.3 | ColumnctRs232ExtensionsDSREnable | read-write | mandatory | This object indicates whether the platform should generate DSR. When disabled the platform will not generate DSR, when enabled, the platform will generate DSR.… |
| 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.4 | ColumnctRs232ExtensionsRTSEnable | read-write | mandatory | This object indicates whether the platform should generate RTS. When disabled the platform will not generate RTS, when enabled, the platform will generate RTS.… |
| 1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.5 | ColumnctRs232ExtensionsDTREnable | read-write | mandatory | This object indicates whether the platform should generate DTR. When disabled the platform will not generate DSR, when enabled, the platform will generate DTR.… |
| 1.3.6.1.4.1.52.4.1.2.7.2.4 | NodectFrDcp | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.4.1 | TablefrDcpCircuitTable | not-accessible | mandatory | A table containing data compression information about specific Data Link Connection Identifiers and corresponding virtual circuit. This information is used to … |
| 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1 | RowfrDcpCircuitEntry | not-accessible | mandatory | The data compression information regarding a single Data Link Connection Identifier. |
| 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.1 | ColumnfrDcpCircuitIfIndex | read-only | mandatory | The ifIndex value of ifEntry that this DCP virtual circuit object is layered onto. |
| 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.2 | ColumnfrDcpCircuitDlci | read-only | mandatory | The Data Link Connection Identifier for this DCP virtual circuit object. |
| 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.3 | ColumnfrDcpCircuitEnable | read-write | mandatory | Indicates whether data compression should take place on this particular end side virtual circuit. |
| 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.4 | ColumnfrDcpCircuitStatus | read-only | mandatory | On indicates that the compression has been successfully negotiated and is operating. Off indicates that the compression negotiation has failed and compression … |
| 1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.5 | ColumnfrDcpCircuitRatio | read-only | mandatory | The ratio of uncompressed to compressed transmitted data. If the data compression status is off, 1:1 will be displayed. |
| 1.3.6.1.4.1.52.4.1.2.7.2.5 | NodectDDSExt | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1 | TablectDDSConfigTable | not-accessible | mandatory | The DDS Configuration Table |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1 | RowctDDSConfigEntry | not-accessible | mandatory | An Entry in the DDS Configuration Table |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.1 | ColumnctDDSLineIndex | read-only | mandatory | A unique value for each ds1 physical port on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.2 | ColumnctDDSIfIndex | read-only | mandatory | Index associated with this dds physical port |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.3 | ColumnctDDSLineMode | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.4 | ColumnctDDSLineCoding | read-write | mandatory | This object describes the variety of Zero Code suppression on this interface. JBZS refers to Jammed Bit Zero suppresion, which forces a 1 bit every 8 bit perio… |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.5 | ColumnctDDSLoopbackConfig | read-write | mandatory | This variable represents the loopback configuration of the DDS interface. ddsNoLoop means the interface is not in loopback state, ddsLocalLoop means the signal… |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.6 | ColumnctDDSLineStatus | read-only | mandatory | This variable describes the current operational status of DDS line. |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.7 | ColumnctDDSTxClockSource | read-write | mandatory | The source of Transmit clock. 'ddsLoopTiming' indicates that the recovered receive clock is used as transmit clock. 'ddsLocalTiming' indicates that a local clo… |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.8 | ColumnctDDSPortInSpeed | read-only | mandatory | This variable describes the current operational receive speed of DDS line. It is a read only value based entirely on DDS type (CC or PRI). |
| 1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.9 | ColumnctDDSPortOutSpeed | read-only | mandatory | This variable describes the current operational transmit speed of DDS line. It is a read only value based entirely on DDS type CC or PRI |
| 1.3.6.1.4.1.52.4.1.2.7.2.6 | NodectPPPExt | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.6.1 | TablectPppCountersTable | not-accessible | mandatory | Table containing the parameters for the local PPP entity related to the counters and timers. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1 | RowctPppCountersEntry | not-accessible | mandatory | PPP counter/timer information for a particular PPP link. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.1 | ColumnctPppCountersIfIndex | read-write | mandatory | The ifIndex of the interface. This is the index of this entry in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.2 | ColumnctPppCountersMaxTerminate | read-write | mandatory | MaxTerminate indicates the number of Terminate- Request packets sent without receiving a Terminate-Ack before assuming that the peer in unable to respond. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.3 | ColumnctPppCountersMaxConfigure | read-write | mandatory | MaxConfigure indicates the number of Configure- Request packets sent without receiving a Configure-Ack, Configre-Nak or Configure-Reject before assuming that t… |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.4 | ColumnctPppCountersMaxFailure | read-write | mandatory | MaxFailure indicates the number of Configure-Nak packets sent without sending a Configure-Ack before assuming that the configuration is not converging. Any fur… |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.5 | ColumnctPppCountersRestartTimer | read-write | mandatory | The Restart timer is used to time transmissions of Configure-Request and Terminate-Request packets. Expiration of the Restart-Timer causes a Timeout event, and… |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2 | TablectPppLcpExtTable | not-accessible | mandatory | Table containing the parameters for the local PPP entity related to the counters and timers. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1 | RowctPppLcpExtEntry | not-accessible | mandatory | PPP LCP configurationinformation for a particular PPP link. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.1 | ColumnctPppLcpExtIfIndex | read-write | mandatory | The ifIndex of the interface. This is the index of this entry in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.2 | ColumnctPppLcpExtAuthenticationProt | read-only | mandatory | Enables a particular authentication protocol on this PPP link(now modified for read-only. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.3 | ColumnctPppLcpExtQualityProt | read-write | mandatory | Enables a particular link-quality protocol on this PPP link. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.4 | ColumnctPppLcpExtPFC | read-write | mandatory | Enables protocol field compression on this PPP link. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.5 | ColumnctPppLcpExtACFC | read-write | mandatory | Enables address and control field compression on this PPP link. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.6 | ColumnctPppLcpExtSelfDescribePadding | read-write | mandatory | This Configuration Option provides a method for an implementation to indicate to the peer that it understands self-describing pads when padding is added at the… |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.7 | ColumnctPppLcpExtCallback | read-write | mandatory | This Configuration Option provides a method for an implementation to request a dial-up peer to call back. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.8 | ColumnctPppLcpExtCompoundFrames | read-write | mandatory | This Configuration Option provides a method for an implementation to send multiple PPP encapsulated packets within the same frame. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.9 | ColumnctPppLcpExtMru | read-write | mandatory | Enables and disables Mru status. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.10 | ColumnctPppLcpExtAccm | read-write | mandatory | Enables and disables Accm status. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.11 | ColumnctPppLcpExtEchoRequest | read-write | mandatory | A zero indicated no Echo Request and any other value provides an interval to send Echo-Requests to the Peer. The Echo-Request provides a Data Link Layer loopba… |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.12 | ColumnctPppLcpExtReplyCounter | read-only | mandatory | Increments a counter if the Local Device correctly received an Echo-Reply from the Peer. LCP MUST be in the OPENED state for an Echo-Reply to occur. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.13 | ColumnctPppLcpExtMpCapable | read-write | mandatory | Multilink Protocol (MP) option selector. Set to a value of one when MP support is desired otherwise set to a value of two. The default value is two. When set t… |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.3 | TablectPppBncpExtTable | not-accessible | mandatory | Table containing the parameters for the local PPP entity related to the counters and timers. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.3.1 | RowctPppBncpExtEntry | not-accessible | mandatory | PPP LCP configuration information for a particular PPP link. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.3.1.1 | ColumnctPppBncpExtIfIndex | read-write | mandatory | The ifIndex of the interface. This is the index of this entry in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.3.1.2 | ColumnctPppBncpExtCrcStatus | read-write | mandatory | Enables and disables CRC status. First our platform must support CRC. If the platform does, then setting to disabled will not send CRC. The default is enabled,… |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.4 | TablectPppMpExtTable | not-accessible | mandatory | Table containing the parameters for the local PPP entity related to the counters and timers. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1 | RowctPppMpExtEntry | not-accessible | mandatory | PPP LCP configurationinformation for a particular PPP link. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.1 | ColumnctPppMpExtIfIndex | read-write | mandatory | The ifIndex of the interface. This is the index of this entry in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.2 | ColumnctPppLcpExtMpLUT | read-write | mandatory | Used to set the Line Utilization Threshold (LUT) % value to compare against the linear weighted percentage by which to determine when more/less bandwidth is to… |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.3 | ColumnctPppLcpExtMpHistoryTime | read-write | mandatory | Used to set the history time value in seconds for the number of line utilization reading(s) desired to compute the average line utilization. That is to say, it… |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.4 | ColumnctPppLcpExtMpMoreBW | read-write | mandatory | Used to set the number of consecutive line utilization average readings that must exceed ctPppLcpExtMpLUT as a condition of when to increase the bandwidth if m… |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.5 | ColumnctPppLcpExtMpLessBW | read-write | mandatory | Used to set the number of consecutive line utilization average readings that must fall below ctPppLcpExtMpLUT as a condition of when to remove possible previou… |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.6 | ColumnctPppLcpExtMpMaxChannels | read-write | mandatory | Used to set the maxium number of channels an MP capable connection is allowed. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.7 | ColumnctPppLcpExtMpChannelsToAdd | read-write | mandatory | Used to set the number of additional channel(s) to increment by whenever the need for more bandwidth is determined. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.8 | ColumnctPppLcpExtMpChannelsToRemove | read-write | mandatory | Used to set the number of channel(s) to decrement by whenever the need for possible previously added bandwidth is determined to no longer be needed. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.5 | TablectPppEcpExtTable | not-accessible | mandatory | Table containing the parameters for the local PPP entity related to the encrpytion control protocol. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.5.1 | RowctPppEcpExtEntry | not-accessible | mandatory | PPP ECP configuration information for a particular PPP link. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.1 | ColumnctPppEcpExtIfIndex | read-write | mandatory | The ifIndex of the interface. This is the index of this entry in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.2 | ColumnctPppEcpKey | read-write | mandatory | A 56-bit key (14 hex characters) used for the DES encryption. |
| 1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.3 | ColumnctPppEcpIV | read-write | mandatory | A 64-bit initialization vector (16 hex characters) used for the DES encryption in CBC mode. |
| 1.3.6.1.4.1.52.4.1.2.7.2.7 | NodectWanalyzer | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.7.1 | TablectWanalyzerTable | not-accessible | mandatory | Table containing the parameters for the local Wanalyzer entity related to the configured Protocol. |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1 | RowctWanalyzerEntry | not-accessible | mandatory | Information for a particular interface. |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.1 | ColumnctWanalyzerIfIndex | read-write | mandatory | The ifIndex of the interface. This is the index of this entry in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.2 | ColumnctWanalyzerEnabled | read-write | mandatory | This Persistent Object is a flag which indicates whether or not the WANalyzer is enabled or disabled. Upon system initialization this flag defaults to disabled… |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.3 | ColumnctWanalyzerMaxEntries | read-write | mandatory | This Persistent Object is an integer greater than 1 which specifies the maximum total number of entries which the table will handle. When the WANalyzer is enab… |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.4 | ColumnctWanalyzerClearAll | read-write | mandatory | When set to 2, the entire table of entries is cleared. Upon clearing of the table, this value is reset to 1. This object is not present if the WANalyzer is dis… |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.5 | ColumnctWanalyzerClearInterface | read-write | mandatory | When set to 2, all entries for this MIB-II interface index will be removed from the table. Upon complete removal of those entries, this value is reset to 1. Th… |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.6 | ColumnctWanalyzerDisplayInterface | read-write | mandatory | When set to a valid MIB-II interface number, the table displays only those entries in the table which were received from that MIB-II interface. This value is s… |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.7 | ColumnctWanalyzerCurrEntries | read-only | mandatory | A non-negative integer indicating the current number of entries in the table. This object is not present if the WANalyzer is disabled. |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.2 | TablewanalyzerMessageTable | not-accessible | mandatory | A table containing all of the message entries for this device. If the WANalyzer is disabled, this table will not be present. |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1 | RowwanalyzerEntry | not-accessible | mandatory | A message entry in the WANalyzer table corresponding to a particular interface in a particular instance. |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.1 | ColumnwanMessageIndex | read-only | mandatory | An integer between 1 and wanalyzerMaxEntries which indicates the overall position this entry has in the WANalyzer table. |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.2 | ColumnwanMessageInterfaceIndex | read-only | mandatory | The MIB-II interface index representing the interface which sent this message. |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.3 | ColumnwanMessageDate | read-only | mandatory | The date when this message was received by the WANalyzer in the standard MMDDYY format. |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.4 | ColumnwanMessageTime | read-only | mandatory | The time of day when this message was received by the WANalyzer in the standard HHMMSS format. |
| 1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.5 | ColumnwanMessageCode | read-only | mandatory | An enumerated value representing the nature of the debug message sent by the interface. |
| 1.3.6.1.4.1.52.4.1.2.7.2.8 | NodectDs1Alarms | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.8.1 | Nodeds1AlarmsGlobalConfigGroup | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.8.1.1 | Scalards1AlarmGlobalAdmin | read-write | mandatory | Used to enable and disable the DS1 Alarm Monitoring Application for all DS1 circuits on the device. |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.1.2 | Scalards1AlarmGlobalAutoRecovery | read-write | mandatory | Used to enable and disable the DS1 Alarm Automatic Recovery feature for all DS1 circuits on the device. For those devices that support ds1 alarm monitoring, bu… |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.1.3 | Scalards1AlarmGlobalTrapEnable | read-write | mandatory | Used to enable and disable the DS1 Alarm SNMP Trap generation feature for all DS1 circuits on the device. This object operates in conjunction with configuratio… |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.1.4 | Scalards1AlarmGlobalESCount | read-write | mandatory | Used in conjuction with ctDs1AlarmESInterval to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measur… |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.1.5 | Scalards1AlarmGlobalESInterval | read-write | mandatory | Used in conjuction with ds1AlarmGlobalESCount to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measu… |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.1.6 | Scalards1AlarmGlobalBPVErrorRate | read-write | mandatory | Used to specify the negative exponent of 10, used in monitoring Bipolar Violations (Code Violations for E1) over intervals defined by ds1AlarmGlobalBPVInterval… |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.1.7 | Scalards1AlarmGlobalBPVInterval | read-write | mandatory | Used to specify the interval, used in monitoring Bipolar Violations (Code Violations for E1) with thresholds defined by ds1AlarmGlobalBPVErrorRate. For example… |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.1.8 | Scalards1AlarmGlobalManualRecovery | read-write | mandatory | To cause a manual recovery to occur on all Ds1 circuits, this object is set to a 1. It is always read as a 1. The recovery will occur only when automatic recov… |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.2 | Tableds1AlarmConfigTable | not-accessible | mandatory | Table containing objects used to configure DS1 alarm functionality on a per DS1 basis. |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1 | Rowds1AlarmConfigEntry | not-accessible | mandatory | A description of a single entry. |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.1 | Columnds1PhysNum | read-only | mandatory | The value for this object is equal to the value of a unique physical connection identifier associated with this DS1 which is clearly labeled on the device. For… |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.2 | Columnds1AlarmAdmin | read-write | mandatory | Used to enable and disable the DS1 Alarm Monitoring Application for this DS1 circuit. |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.3 | Columnds1AlarmAutoRecovery | read-write | mandatory | Used to enable and disable the DS1 Alarm Automatic Recovery feature for this DS1 circuit. For those devices that support ds1 alarm monitoring, but do not suppo… |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.4 | Columnds1AlarmTrapEnable | read-write | mandatory | Used to enable and disable the DS1 Alarm SNMP Trap generation feature for this DS1 circuit. This object operates in conjunction with configuration of objects i… |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.5 | Columnds1AlarmESCount | read-write | mandatory | Used in conjuction with ctDs1AlarmESInterval to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measur… |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.6 | Columnds1AlarmESInterval | read-write | mandatory | Used in conjuction with ctDs1AlarmESCount to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measured … |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.7 | Columnds1AlarmBPVErrorRate | read-write | mandatory | Used to specify the negative exponent of 10, used in monitoring Bipolar Violations (Code Violations for E1) over intervals defined by ds1AlarmBPVInterval. For … |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.8 | Columnds1AlarmBPVInterval | read-write | mandatory | Used to specify the interval, used in monitoring Bipolar Violations (Code Violations for E1) with thresholds defined by ds1AlarmBPVErrorRate. For example, for … |
| 1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.9 | Columnds1AlarmManualRecovery | read-write | mandatory | To cause a manual recovery to occur, this object is set to a 1. It is always read as a 1. The recovery will occur only when automatic recovery is disabled. |
| 1.3.6.1.4.1.52.4.1.2.7.2.9 | NodectIPPQFilters | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.9.1 | NodeipPQConfigGroup | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.9.1.1 | ScalaripPQAdmin | read-write | mandatory | Used to enable and disable the IP Priority Queue Forwarding Application. |
| 1.3.6.1.4.1.52.4.1.2.7.2.9.1.2 | ScalariPPQMaxEntries | read-only | mandatory | Returns the maximum number of IP address entries supported by the IP Priority Queue application on this device. |
| 1.3.6.1.4.1.52.4.1.2.7.2.9.1.3 | ScalariPPQNumEntries | read-only | mandatory | Get the number of IP address entries currently programmed in the ipPQAddressTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.9.1.4 | ScalariPPQAddAddress | read-write | mandatory | Add an IP address to the ipPQAddressTable. Always read as a 0.0.0.0. |
| 1.3.6.1.4.1.52.4.1.2.7.2.9.1.5 | ScalariPPQDelAddress | read-write | mandatory | Delete an IP address from the ipPQAddressTable. Always read as a 0.0.0.0. |
| 1.3.6.1.4.1.52.4.1.2.7.2.9.2 | TableipPQAddressTable | not-accessible | mandatory | Table containing IP addresses, used in an IP Priority Queue Forwarding function. |
| 1.3.6.1.4.1.52.4.1.2.7.2.9.2.1 | RowipPQAddressEntry | not-accessible | mandatory | A description of a single entry. |
| 1.3.6.1.4.1.52.4.1.2.7.2.9.2.1.1 | ColumnipPQAddressId | read-only | mandatory | A unique value identifying an element in a sequence of IP PQ address entries. |
| 1.3.6.1.4.1.52.4.1.2.7.2.9.2.1.2 | ColumnipPQIPAddress | read-only | mandatory | Returns an IP address associated with a specific entry in this table. |
| 1.3.6.1.4.1.52.4.1.2.7.2.10 | NodectDs3Ext | |||
| 1.3.6.1.4.1.52.4.1.2.7.2.10.1 | TablectDs3ExtensionsTable | not-accessible | mandatory | This table is an extension to the standard ds3 configuration table. It is a list of items that are pertinant to ds3 ports on a platform. There is one entry per… |
| 1.3.6.1.4.1.52.4.1.2.7.2.10.1.1 | RowctDs3ExtensionsEntry | not-accessible | mandatory | A ds3 extensions entry containing objects relating to the particular ds3 physical port. |
| 1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.1 | ColumnctDs3ExtensionsEntryIndex | read-only | mandatory | A unique value for each ds3 physical port on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.2 | ColumnctDs3ExtensionsNumInterfaces | read-only | mandatory | The number of interfaces on this physical port. This number inidicates the number of entries this physical port uses in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.3 | ColumnctDs3ExtensionsLineBuildOut | read-write | mandatory | The line build out setting for this ds3 physical port. Unknown indicates that the setting is neither readable or writable. |