CTRON-SFCS-MIB
501 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52 | Nodecabletron | |||
| 1.3.6.1.4.1.52.4 | Nodemibs | |||
| 1.3.6.1.4.1.52.4.1 | Nodectron | |||
| 1.3.6.1.4.1.52.4.1.2 | NodectDataLink | |||
| 1.3.6.1.4.1.52.4.1.2.11 | NodectSwitch | |||
| 1.3.6.1.4.1.52.4.1.2.11.1 | NodectsfSwitch | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1 | NodectSFCS | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1 | NodesfcsSystem | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1 | NodesfcsSysConfig | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1 | NodesfcsSysConfigTable | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1 | NodesfcsSysConfigEnt | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.1 | ScalarsfcsSysConfigAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.2 | ScalarsfcsSysConfigOperStatus | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.3 | ScalarsfcsSysConfigOperTime | read-only | mandatory | Indicates the amount of time (# of time ticks) that this switch system has been in its current operational state. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.4 | ScalarsfcsSysConfigLastChange | read-only | mandatory | Indicates the last time a change was made to the configuration entry for this switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.5 | ScalarsfcsSysConfigSwitchCapacity | read-only | mandatory | Indicates the maximum front panel bandwidth based on current hardware configuration of the switch in Mbps |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.6 | ScalarsfcsSysConfigMaxCnxEntries | read-only | mandatory | Indicates the maximum number of connections which can be established on this switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.7 | ScalarsfcsSysConfigMaxStatEntries | read-only | mandatory | Indicates the maximum number of stats enabled VCs for this switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.8 | ScalarsfcsSysConfigMaxUpcEntries | read-only | mandatory | Indicates the maximum number of UPC enabled VCs for this switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.9 | ScalarsfcsSysConfigNumberANIMS | read-only | mandatory | Indicates the number of ATM Network Inteface Modules currently configured on this switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.10 | ScalarsfcsSysConfigInterfaceCapability | read-only | mandatory | Indicates the total bandwidth capability(of the engine) for this switch expressed in Mbps. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.11 | ScalarsfcsSysConfigTypeofSwitch | read-only | mandatory | Indicates what type of switch this is. other(1) sfcellswitch(2) sfpacketswitch(3) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.12 | ScalarsfcsSysConfigPolicingSupport | read-only | mandatory | Indicates whether or not this switch supports policing. supported(1) not supported(2) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.13 | ScalarsfcsSysConfigPnniNsapPrefix | read-write | mandatory | This is the 13 byte NSAP prefix to use with address registration. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.14 | ScalarsfcsSysConfigPnniNodeLevel | read-write | mandatory | This is the PNNI node level value. The range can be from 0 to 104. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.15 | ScalarsfcsSysConfigPnniAddessingMode | read-write | mandatory | This is the PNNI addressing mode - that can range from 0 to 2. 0 - Auto Mode using MAC 1 - Auto Mode using board# 2 - Manual |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.16 | ScalarsfcsSysConfigPnniAddessingAdmnStatus | read-write | mandatory | This is the PNNI addressing admn status. Down - 2. Up - 1. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.17 | ScalarsfcsSysConfigFMVer | read-only | mandatory | This is the Firmware Revision of the switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.18 | ScalarsfcsSysConfigCTMSlotMask | read-only | mandatory | This is the slot mask for all ctm boards in the chassis. The least significant bit represents slot 1. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.19 | ScalarsfcsSysConfigMaxfreecva | read-write | mandatory | This is the maximum number of CAC connection blocks that CAC will allow on its free list. The default is 1024. If too low CAC performance will degrade (thrashi… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.20 | ScalarsfcsSysConfigUBR | read-write | mandatory | For the set operation: UBR_Cfg is set across all boards in the chassis (that are operational and manageable). For the get operation: UBR_Cfg setting is retrive… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2 | NodesfcsSysStatus | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1 | NodesfcsSysStatusTable | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1 | NodesfcsSysStatusEnt | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.1 | ScalarsfcsSysStatusTdmCellCount | read-only | mandatory | Indicates the total number of cells being transfered across the TDM for the entire switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.2 | ScalarsfcsSysStatusTdmUtilization | read-only | mandatory | Indicates the total percentage TDM utilization for the switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.3 | ScalarsfcsSysStatusCurrCnxEntries | read-only | mandatory | Indicates the current number of connection entries for this switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.4 | ScalarsfcsSysStatusCurrUPCEntries | read-only | mandatory | Indicates the current number of UPC entries for this switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.5 | ScalarsfcsSysStatusCurrStatsEntries | read-only | mandatory | Indicates the current number of statistics entries for this switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.6 | ScalarsfcsSysStatusAllocatedBw | read-only | mandatory | Indicates the current allocated bandwidth of the switch in bits per second. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3 | NodesfcsSysSystemCfg | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1 | NodesfcsSysSystemCfgTable | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1 | NodesfcsSysSystemCfgEnt | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.1 | ScalarsfcsSysConfigAdminReset | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.2 | ScalarsfcsSysConfigATOMPersistance | read-write | mandatory | This enables or disables ATOM mib persistance. enabled(1) disabled(2) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.3 | ScalarsfcsSysConfigVcSize | read-write | mandatory | This entry is the size of VCs allocated for all VPs in the switch. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.4 | ScalarsfcsSysConfigPowerUpDiags | read-write | mandatory | This enables or disables power up diags. enabled(1) disabled(2) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.4 | NodesfcsSysBPCfg | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.4.1 | NodesfcsSysBPTable | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.4.1.1 | NodesfcsSysBPEnt | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.1.4.1.1.1 | ScalarsfcsSysBPClkSelect | read-write | mandatory | This enables one of two backplane clocks from any slot. A valid entry is any number that correspond to a slot having a board supporting this mib. A write to th… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2 | NodesfcsEngine | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1 | NodesfcsConfig | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1 | TablesfcsConfigTable | not-accessible | mandatory | This table contains the configuration and administrative information for each SFCS module. Essentially, a separate SFCS instance exists for each switch module.… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1 | RowsfcsConfigEntry | not-accessible | mandatory | Each entry specifies the SFCS configuration for the SFCS module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.1 | ColumnsfcsConfigSlotIndex | read-only | mandatory | The primary index to the SFCS switch table. This identifies the chassis slot number for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.2 | ColumnsfcsConfigAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.3 | ColumnsfcsConfigAdminReset | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.4 | ColumnsfcsConfigOperStatus | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.5 | ColumnsfcsConfigOperTime | read-only | mandatory | Indicates the amount of time (# of time ticks) that this SFCS module has been in its current operational state. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.6 | ColumnsfcsConfigLastChange | read-only | mandatory | Indicates the last time a change was made to the configuration entry for this SFCS switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.7 | ColumnsfcsConfigVersion | read-only | mandatory | Indicates the current revision level of the SFCS MIB for this switch module expressed as an integer. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.8 | ColumnsfcsConfigMibRev | read-only | mandatory | Indicates in textual format the current revision level of the Cabletron SFCS MIB for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.9 | ColumnsfcsConfigSwitchHostPort | read-only | mandatory | Indicates the switch port that is attached to the host. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.10 | ColumnsfcsConfigHostCtrlATMAddr | read-only | mandatory | Indicates the ATM address of the host. (SAR) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.11 | ColumnsfcsConfigSwitchCapacity | read-only | mandatory | Indicates the front panel bandwidth based on the hardware that is currently installed, in Mbps. (number of ports and the port type) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.12 | ColumnsfcsConfigMaxCnxEntries | read-only | mandatory | Indicates the maximum number of connections which can be established on this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.13 | ColumnsfcsConfigMaxStatEntries | read-only | mandatory | Indicates the maximum number of stats enabled VCs for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.14 | ColumnsfcsConfigMaxUpcEntries | read-only | mandatory | Indicates the maximum number of UPC enabled VCs for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.15 | ColumnsfcsConfigNumberANIMS | read-only | mandatory | Indicates the number of ATM Network Inteface Modules currently configured on this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.16 | ColumnsfcsConfigBwCapability | read-only | mandatory | Indicates the total bandwidth capability for this switch engine expressed in Mbps. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.17 | ColumnsfcsConfigMasterClock1Source | read-write | mandatory | Indicates the clocking source for MasterClock1 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.18 | ColumnsfcsConfigMasterClock2Source | read-write | mandatory | Indicates the clocking source for MasterClock2 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.19 | ColumnsfcsConfigMasterClock1Standby | read-write | mandatory | Indicates the clocking stand-by for MasterClock1 on each board. The write will fail if it is also currently the source of the backplane. The write will also fa… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.20 | ColumnsfcsConfigMasterClock2Standby | read-write | mandatory | Indicates the clocking stand-by for MasterClock2 on each board. The write will fail if it is also currently the source of the backplane. The write will also fa… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2 | NodesfcsStatus | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1 | TablesfcsStatusTable | not-accessible | mandatory | This table contains the status information for each SFCS switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1 | RowsfcsStatusEntry | not-accessible | mandatory | Each entry contains the SFCS statistics for the SFCS instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.1 | ColumnsfcsStatusSlotIndex | read-only | mandatory | The primary index to the SFCS switch table. This identifies the chassis slot number for this SFCS module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.2 | ColumnsfcsStatusTdmCellCount | read-only | mandatory | Indicates the total number of cells being transfered across the TDM for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.3 | ColumnsfcsStatusTdmUtilization | read-only | mandatory | Indicates the percentage TDM utilization for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.4 | ColumnsfcsStatusCurrCnxEntries | read-only | mandatory | Indicates the current number of connection entries for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.5 | ColumnsfcsStatusCurrUPCEntries | read-only | mandatory | Indicates the current number of UPC entries for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.6 | ColumnsfcsStatusCurrStatsEntries | read-only | mandatory | Indicates the current number of statistics entries for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.7 | ColumnsfcsStatusCurrCtmAgent | read-only | mandatory | Indicates the current board number of the ctm agent for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3 | NodesfcsUPCEngine | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1 | TablesfcsUPCTable | not-accessible | mandatory | This table contains the Usage Parameter Control info for this SFCS module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1 | RowsfcsUPCEntry | not-accessible | mandatory | Each entry contains the UPC data for the SFCS instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.1 | ColumnsfcsUPCSlotIndex | read-only | mandatory | The primary index to the SFCS switch table. This identifies the slot number for this SFCS module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.2 | ColumnsfcsUPCAdminStatus | read-write | mandatory | Sets the administrative state of the SFCS module's UPC engine. enabled(1) disabled(2) other(3) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.3 | ColumnsfcsUPCOperStatus | read-only | mandatory | Indicates the operational state of the SFCS module's UPC engine. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.4 | ColumnsfcsUPCReset | read-write | mandatory | Resets the UPC engine for this SFCS module. other(1) reset(2) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.5 | ColumnsfcsUPCOperTime | read-only | mandatory | Indicates the amount of time (# of time ticks) that the UPC engine has been active for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4 | NodesfcsStatisticsEngine | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1 | TablesfcsStatsEngineTable | not-accessible | mandatory | This table contains information for the Statistics engine for a particular switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1 | RowsfcsStatsEngineEntry | not-accessible | mandatory | Each entry contains the statistics engine data for the SFCS module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.1 | ColumnsfcsStatsEngineSlotIndex | read-only | mandatory | The primary index to the SFCS stats engine table. This identifies the chassis slot number for this SFCS module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.2 | ColumnsfcsStatsEngineAdminStatus | read-write | mandatory | Sets the administrative state of the SFCS switch statistics engine. Writing a value of enabled(1) causes these counters to become active for this SFCS switch i… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.3 | ColumnsfcsStatsEngineOperStatus | read-only | mandatory | Indicates the operational state of the SFCS switch statistics engine for this switch module. enabled(1) disabled(2) other(3) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.4 | ColumnsfcsStatsEngineReset | read-write | mandatory | Resets the SFCS switch counters for this SFCS module. Writing a value of reset(2) resets the SFCS switch counters to 0 and causes sfcsStatsEngineOperTime to al… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.5 | ColumnsfcsStatsEngineOperTime | read-only | mandatory | Indicates the amount of time (# of time ticks) that the SFCS switch statistics have been active for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5 | NodesfcsPacketDiscardEngine | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1 | TablesfcsPacketDiscardEngineTable | not-accessible | mandatory | This table contains information for the Packet Discard engine for a particular switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1 | RowsfcsPacketDiscardEngineEntry | not-accessible | mandatory | Each entry contains the packet discard engine data for the SFCS module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.1 | ColumnsfcsPacketDiscardEngineSlotIndex | read-only | mandatory | The primary index to the SFCS packet discard engine table. This identifies the chassis slot number for this SFCS module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.2 | ColumnsfcsPacketDiscardEngineAdminStatus | read-write | mandatory | Sets the administrative state of the SFCS switch packet discard engine. Writing a value of enabled(1) causes these packet discard registers to become active fo… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.3 | ColumnsfcsPacketDiscardEngineOperStatus | read-only | mandatory | Indicates the operational state of the SFCS switch packet discard engine for this switch module. enabled(1) disabled(2) other(3) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.4 | ColumnsfcsPacketDiscardEngineReset | read-write | mandatory | Resets the SFCS switch registers for this SFCS module. Writing a value of reset(2) resets the SFCS switch packet discard registers to 0 and causes sfcsPacketDi… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.5 | ColumnsfcsPacketDiscardEngineEPDPercentage | read-write | mandatory | Sets the Early Packet Discard threshold percentage for every port, and every priority on a single blade. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.6 | ColumnsfcsPacketDiscardEngineOperTime | read-only | mandatory | Indicates the amount of time (# of time ticks) that the SFCS switch packet discard engine has been active for this switch module. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3 | NodesfcsANIM | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1 | NodesfcsANIMConfig | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1 | TablesfcsANIMConfigTable | not-accessible | mandatory | This table contains the configuration information for each SFCS ANIM instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1 | RowsfcsANIMConfigEntry | not-accessible | mandatory | Each entry contains the SFCS config info for the SFCS instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.1 | ColumnsfcsANIMConfigANIMIndex | read-only | mandatory | This index specifies which ANIM we are dealing with. This reference is in the same format as MIB II's InterfaceIndex. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.2 | ColumnsfcsANIMConfigAdminStatus | read-write | mandatory | Sets the administrative state of the SFCS switch ANIM. enabled(1) disabled(2) other(3) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.3 | ColumnsfcsANIMConfigOperStatus | read-only | mandatory | Indicates the operational state of the SFCS switch ANIM for this SFCS ANIM instance. enabled(1) disabled(2) other(3) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.4 | ColumnsfcsANIMConfigANIMType | read-only | mandatory | Indicates the type of physical interface for this ANIM. The types are described in ctron.oids |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.5 | ColumnsfcsANIMConfigNumInterfaces | read-only | mandatory | Indicates the number of operational interfaces for this ANIM. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.6 | ColumnsfcsANIMConfigLineRate | read-only | mandatory | Indicates the line rate per port for this ANIM in Mbps. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.7 | ColumnsfcsANIMConfigToMB | read-write | mandatory | This is the ANIM clock source to board. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.8 | ColumnsfcsANIMConfigMBClockSelect | read-write | mandatory | This indicates the ANIM clock source. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2 | NodesfcsANIMStatistics | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1 | TablesfcsANIMStatsTable | not-accessible | mandatory | This table contains the statistics information for each SFCS ANIM instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1 | RowsfcsANIMStatsEntry | not-accessible | mandatory | Each entry contains the SFCS statistics for the SFCS instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.1 | ColumnsfcsANIMStatsANIMIndex | read-only | mandatory | The primary index which specifies which ANIM instance we are dealing with. This index is formatted like MIB II's Interface Index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.2 | ColumnsfcsANIMStatsRxCells | read-only | mandatory | Indicates the number of cells received from this ANIM's interfaces. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.3 | ColumnsfcsANIMStatsTxCells | read-only | mandatory | Indicates the number of cells transmitted from this ANIM's interfaces. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3 | NodesfcsANIMPic | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1 | TablesfcsANIMPicTable | not-accessible | mandatory | This table contains the PIC information for each SFCS ANIM instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1 | RowsfcsANIMPicEntry | not-accessible | mandatory | Each entry contains the SFCS PIC info for the SFCS instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.1 | ColumnsfcsANIMPicSlot | read-only | mandatory | Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.2 | ColumnsfcsANIMPicIndex | read-only | mandatory | Uniquely identifies the instance of a PIC in a particular slot. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.3 | ColumnsfcsANIMPicLocation | read-only | mandatory | Defines location of the PIC chip. This takes on any of the encoding values defined below for backplane, module, daughter board, brim. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.4 | ColumnsfcsANIMPicStatus | read-only | mandatory | Provides the status of the specific PIC chip. the values are defined as follows: other(1) - firmware can not determine status present(2) - PIC seems to be func… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.5 | ColumnsfcsANIMPicVersion | read-only | mandatory | Reflects the version of the PIC implementation that this PIC conforms to. This has the format x.yy . If non-existent, this object will be set to all blanks(asc… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.6 | ColumnsfcsANIMPicModuleType | read-only | mandatory | Defines the standard module type value as defined in ctron-oids. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.7 | ColumnsfcsANIMPicMfgPN | read-only | mandatory | Describes the manufacturing level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Charac… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.8 | ColumnsfcsANIMPicMfgSN | read-only | mandatory | Describes the manufacturing level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week)… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.9 | ColumnsfcsANIMPicMfgPartNumb | read-only | mandatory | This object presents the part number portion of the ctPicMfgPN object. This object contains the same information however in a more human readable format. If no… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.10 | ColumnsfcsANIMPicMfgSerialNumb | read-only | mandatory | This object presents the serial number portion of the ctPicMfgSN object. This object contains the same information however in a more human readable format. If … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.11 | ColumnsfcsANIMPicMfgReworkLocation | read-only | mandatory | The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicMfgPN object howev… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.12 | ColumnsfcsANIMPicMfgMfgLocation | read-only | mandatory | The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicMfgSN object h… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.13 | ColumnsfcsANIMPicMfgDateCode | read-only | mandatory | The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfgS… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.14 | ColumnsfcsANIMPicMfgRevisionCode | read-only | mandatory | The 3 character board level revision code field of this module. This object contains the same information as presented in ctPicMfgSN object however in a more h… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.15 | ColumnsfcsANIMPicTLPN | read-only | mandatory | Describes the top level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rewor… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.16 | ColumnsfcsANIMPicTLSN | read-only | mandatory | Describes the top level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes -… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.17 | ColumnsfcsANIMPicTLPartNumb | read-only | mandatory | This object presents the part number portion of the ctPicTLPN object. This object contains the same information however in a more human readable format. If non… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.18 | ColumnsfcsANIMPicTLSerialNumb | read-only | mandatory | This object presents the serial number portion of the ctPicTLSN object. This object contains the same information however in a more human readable format. If n… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.19 | ColumnsfcsANIMPicTLReworkLocation | read-only | mandatory | The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicTLPN object howeve… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.20 | ColumnsfcsANIMPicTLMfgLocation | read-only | mandatory | The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicTLSN object ho… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.21 | ColumnsfcsANIMPicTLDateCode | read-only | mandatory | The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTLSN… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.22 | ColumnsfcsANIMPicTLRevisionCode | read-only | mandatory | The 3 character top level revision code field of this module. This object contains the same information as presented in ctPicTLSN object however in a more huma… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.23 | ColumnsfcsANIMPicTLPcbRevision | read-only | mandatory | Defines the Cabletron revision of the art work for this module. If non-existent, this object will be set to all blanks(ascii 32). |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.24 | ColumnsfcsANIMPicMacAddr | read-only | mandatory | The base MAC address(ethernet format)assigned to the module. If this field is not used then it should have a value of a zero length string. If non-existent, th… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.25 | ColumnsfcsANIMPicNumbRsvdAddrs | read-only | mandatory | The number of reserved MAC addresses starting at the address as defined in ctPicMacAddr. If no MAC addresses are reserved this object should have a value of 0. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.26 | ColumnsfcsANIMPicBoardLevelRevision | read-only | mandatory | Defines the Cabletron board level revision level code for this module. If non-existent, this object will be set to blanks (ascii 32). |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.27 | ColumnsfcsANIMPicModuleTypeString | read-only | mandatory | Describes the module associated with this PIC in a human readable format. If non-existent, this object will be set to blanks (ascii 32). |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.28 | ColumnsfcsANIMPicDcDcConverterType | read-only | mandatory | Describes the voltage of the installed DCDC Converter input and output lines. If the Module does not contain a DCDC Converter this object will be set to blanks… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.29 | ColumnsfcsANIMPicDcDcConverterInputPower | read-only | mandatory | Describes the maximum allowed input power for the DCDC input line. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32). |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.30 | ColumnsfcsANIMPicSmb1PromVersion | read-only | mandatory | Describes the current version of the SMB1 prom. If the Module does not contain an SMB1 prom this object will be set to blanks (ascii 32). |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4 | NodesfcsInterface | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1 | NodesfcsInterfaceConfig | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1 | TablesfcsInterfaceConfigTable | not-accessible | mandatory | This table contains the configuration information of each configured SFCS switch interface. If SFCS is not configured on a port, than an entry will not exist. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1 | RowsfcsInterfaceConfigEntry | not-accessible | mandatory | Each entry specifies the SFCS configuration for the SFCS switch interface for which the entry exists. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.1 | ColumnsfcsInterfaceConfigInterfaceIndex | read-only | mandatory | The index which specifies which interface we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.2 | ColumnsfcsInterfaceConfigType | read-only | deprecated | Sets the type of interface access attribute for the SFCS interfaces. Access ports allow single user or shared access and perform statisics and control; network… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.3 | ColumnsfcsInterfacePeakBufferUseage | read-only | mandatory | An accumulated snap shot of the current peak queue depth for the configured buffer queues. This information is obtained from a read/reset register. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.4 | ColumnsfcsInterfaceConfigNumberOfQueues | read-only | mandatory | Indicates the number of priority queues configured on this interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.5 | ColumnsfcsInterfaceConfigSigStackID | read-only | mandatory | Indicates the user signalling stack ID for this interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.6 | ColumnsfcsInterfaceConfigClockingSource | read-write | mandatory | The interface clocking source. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2 | NodesfcsInterfaceStatistics | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1 | TablesfcsInterfaceStatsTable | not-accessible | mandatory | This table contains the cell counts for each SFCS switch interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1 | RowsfcsInterfaceStatsEntry | not-accessible | mandatory | Specifies the SFCS cell counts for the SFCS interface for which this entry exists. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.1 | ColumnsfcsInterfaceStatsInterfaceIndex | read-only | mandatory | The index which specifies which interface we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.2 | ColumnsfcsInterfaceStatsRxErrors | read-only | mandatory | Indicates the number of receive path lookup invalid and out of range errors. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.3 | ColumnsfcsInterfaceStatsVPILookupInvalidErrors | read-only | mandatory | Indicates the number of VPI lookup invalid and out of range errors. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.4 | ColumnsfcsInterfaceStatsRxCnxLookupInvalidErrors | read-only | mandatory | Indicates the number of receive connection lookup invalid errors. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.5 | ColumnsfcsInterfaceStatsRxCellCnt | read-only | mandatory | Indicates the number of receive cells on this interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.6 | ColumnsfcsInterfaceStatsTxCellCnt | read-only | mandatory | Indicates the number of transmit cells on this interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.7 | ColumnsfcsInterfaceStatsOverflowDropCellCnt | read-only | mandatory | Indicates the number of cells that were dropped due to queue overflows. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5 | NodesfcsQueue | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1 | NodesfcsQueueConfig | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1 | TablesfcsQueueConfigTable | not-accessible | mandatory | This table contains the configuration information for all queues on the SFCS. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1 | RowsfcsQueueConfigEntry | not-accessible | mandatory | Each entry specifies the queue information for the SFCS switch for which the entry exists. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.1 | ColumnsfcsQueueConfigInterfaceIndex | read-only | mandatory | The index which specifies which interface we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.2 | ColumnsfcsQueueConfigQueueIndex | read-only | mandatory | The index which specifies which transmit queue we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.3 | ColumnsfcsQueueConfigQueueSize | read-only | mandatory | Indicates the size of the transmit queue for this queue instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.4 | ColumnsfcsQueueConfigQueueBandwidth | read-only | mandatory | Indicates the percentage of this interface's bandwidth utilized by this particular queue. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.5 | ColumnsfcsQueueConfigClpDropThreshold | read-write | mandatory | Indicates the queue level to start dropping CLP=1 cells for this queue. This level is expressed as the percentage of this queue's size. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.6 | ColumnsfcsQueueConfigCongestionThreshold | read-write | mandatory | Indicates the level to consider this queue congested. This level is expressed as the percentage of this queue's size. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.7 | ColumnsfcsQueueConfigEFCILowThreshold | read-write | mandatory | Indicates the lower threshold used for EFCI for this queue instance. This level is expressed as the percentage of this queue's size. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.8 | ColumnsfcsQueueConfigRMThreshold | read-write | mandatory | Indicates the remote management queue threshold expressed as a percentage of the queue's size. When this level is hit, a management message is sent to the send… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.9 | ColumnsfcsQueueConfigEPDThreshold | read-write | mandatory | Indicates the Early Packet Discard threshold expressed as a percentage of the queue's size. When this level is exceeded the Transmit ASIC starts to drop all ce… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2 | NodesfcsQueueStatistics | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1 | TablesfcsQueueStatsTable | not-accessible | mandatory | This table contains the statistics information for all queues on the SFCS. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1 | RowsfcsQueueStatsEntry | not-accessible | mandatory | Each entry specifies the queue information for the SFCS switch for which the entry exists. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.1 | ColumnsfcsQueueStatsInterfaceIndex | read-only | mandatory | The index which specifies which interface we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.2 | ColumnsfcsQueueStatsQueue | read-only | mandatory | The index which specifies which queue we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.3 | ColumnsfcsQueueStatsTxClpCellsDiscarded | read-only | mandatory | Indicates the number of cells with CLP=1 that were discarded for this queue instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.4 | ColumnsfcsQueueStatsTxCellsDropped | read-only | mandatory | Indicates the number of cells that overflowed the buffer for this queue instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.5 | ColumnsfcsQueueStatsQueuePeakLevel | read-only | mandatory | Indicates the peak level since last read for this queue instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.6 | ColumnsfcsQueueStatsTxCellCnt | read-only | mandatory | Indicates the transmit cell count on a per queue basis. A value of zero indicates not available |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7 | NodesfcsConnection | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1 | NodesfcsConnectionConfig | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1 | TablesfcsCnxCfgTable | not-accessible | mandatory | This table contains the connection configuration information. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1 | RowsfcsCnxCfgEntry | not-accessible | mandatory | Each entry specifies the connection configuration information for the SFCS switch connection instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.1 | ColumnsfcsCnxCfgCrossConnectIndex | read-only | mandatory | A unique value to identify this cross-connect. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.2 | ColumnsfcsCnxCfgCrossConnectLowIfIndex | read-only | mandatory | The value of this object is equal to the low MIB II IfIndex value of the ATM interface port for this cross-connect. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.3 | ColumnsfcsCnxCfgCrossConnectLowVpi | read-only | mandatory | The value of this object is equal to the low VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxCfgCrossConnectIndex. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.4 | ColumnsfcsCnxCfgCrossConnectLowVci | read-only | mandatory | The value of this object is equal to the low VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxCfgCrossConnectInde… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.5 | ColumnsfcsCnxCfgCrossConnectHighIfIndex | read-only | mandatory | The value of this object is equal to the high MIB II IfIndex value of the ATM interface port for this cross-connect. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.6 | ColumnsfcsCnxCfgCrossConnectHighVpi | read-only | mandatory | The value of this object is equal to the high VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxCfgCrossConnectInde… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.7 | ColumnsfcsCnxCfgCrossConnectHighVci | read-only | mandatory | The value of this object is equal to the high VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxCfgCrossConnectInd… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.8 | ColumnsfcsCnxCfgType | read-only | mandatory | Indicates the connection type for this VC. point-to-point-vpl(1) point-to-mpoint-vpl(2) mpoint-to-mpoint-vpl(3) point-to-point-vcl(4) point-to-mpoint-vcl(5) mp… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.9 | ColumnsfcsCnxCfgTmType | read-only | mandatory | Indicates the type of traffic management used on this VC. other (1) efci (2) er (3) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.10 | ColumnsfcsCnxCfgUPCEnable | read-only | mandatory | Indicates whether or not UPC policing is enabled on this VC. A VC can be bi-directional or uni-directional. Due to this, the UPC bit is a masking based on dire… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.11 | ColumnsfcsCnxCfgStatsEnable | read-only | mandatory | Indicates whether statistics will be kept on this VC. enabled(1) disabled(2) other(3) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.12 | ColumnsfcsCnxCfgStatsTableCounterSizes | read-only | mandatory | Indicates the size of the drop counter for this VC. thirtytwobittagcounter (1) thirtytwobitdropcounter (2) sixteenbiteachcounter (3) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.13 | ColumnsfcsCnxCfgOwner | read-only | mandatory | Indicates the owner of this cross connect. other(1) own(2) dontown(3) |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2 | NodesfcsConnectionStatistics | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1 | TablesfcsCnxStatsTable | not-accessible | mandatory | This table contains the connection configuration information. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1 | RowsfcsCnxStatsEntry | not-accessible | mandatory | Each entry specifies the connection statistics information for the SFCS switch connection instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.1 | ColumnsfcsCnxStatsCrossConnectIndex | read-only | mandatory | A unique value to identify this cross-connect. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.2 | ColumnsfcsCnxStatsCrossConnectLowIfIndex | read-only | mandatory | The value of this object is equal to the low MIB II IfIndex value of the ATM interface port for this cross-connect. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.3 | ColumnsfcsCnxStatsCrossConnectLowVpi | read-only | mandatory | The value of this object is equal to the low VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxStatsCrossConnectInd… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.4 | ColumnsfcsCnxStatsCrossConnectLowVci | read-only | mandatory | The value of this object is equal to the low VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxStatsCrossConnectIn… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.5 | ColumnsfcsCnxStatsCrossConnectHighIfIndex | read-only | mandatory | The value of this object is equal to the high MIB II IfIndex value of the ATM interface port for this cross-connect. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.6 | ColumnsfcsCnxStatsCrossConnectHighVpi | read-only | mandatory | The value of this object is equal to the high VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxStatsCrossConnectIn… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.7 | ColumnsfcsCnxStatsCrossConnectHighVci | read-only | mandatory | The value of this object is equal to the high VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxStatsCrossConnectI… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.8 | ColumnsfcsCnxStatsLoToHiHTxCells | read-only | mandatory | Indicates the transmitted cell count for this connection. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.9 | ColumnsfcsCnxStatsLoToHiDroppedCells | read-only | mandatory | Indicates the dropped cell count for this connection instance. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.10 | ColumnsfcsCnxStatsLoToHiTaggedCells | read-only | mandatory | Indicates the tagged cell count for this connection instance. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.11 | ColumnsfcsCnxStatsHiToLoHTxCells | read-only | mandatory | Indicates the transmitted cell count for this connection. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.12 | ColumnsfcsCnxStatsHiToLoDroppedCells | read-only | mandatory | Indicates the dropped cell count for this connection instance. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.13 | ColumnsfcsCnxStatsHiToLoTaggedCells | read-only | mandatory | Indicates the tagged cell count for this connection instance. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3 | NodesfcsConnectionError | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1 | TablesfcsCnxErrorTable | not-accessible | mandatory | This table contains the connection error information supplied by the atmAPI mib. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1 | RowsfcsCnxErrorEntry | not-accessible | mandatory | A list of VCC connection request failures. This table is indexed the same way as the atmVcCrossConnectTable in the AToM mib. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.1 | ColumnsfcsCnxErrorCode | read-only | mandatory | Specifies the error reason for failure of the connection setup. 01 fatal_error 02 moe_table_out_of_range 03 moe_mem_not_allocated 04 mem_fetch_double_reqst 05 … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.2 | ColumnsfcsCnxErrorTimeStamp | read-only | mandatory | Indicates the value of the sysUpTime when this connection request failed. We will support this field only if the element management uses this table. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.3 | ColumnsfcsCnxErrorRowStatus | read-write | mandatory | The administrative control of this entry. The owner could delete this entry after reading it, to prevent this table from growing too big. other (1) inactive (2… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.8 | NodesfcsConnectionAPI | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.8.1 | ScalarsfcsCnxAPIEntry | read-only | mandatory | The connection API leaf provides a method for contool for creating PVCs. This always returns a value of 0. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9 | NodesfcsCTM | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1 | NodesfcsCTMInterfaceConfig | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1 | TablesfcsCTMInterfaceConfigTable | not-accessible | mandatory | This table contains the configuration information of each configured SHEMP interface. If SFCS is not configured on a port, than an entry will not exist. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1 | RowsfcsCTMInterfaceConfigEntry | not-accessible | mandatory | Each entry specifies the SFCS configuration for the SFCS switch interface for which the entry exists. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.1 | ColumnsfcsCTMInterfaceConfigInterfaceIndex | read-only | mandatory | The index which specifies which interface we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.2 | ColumnsfcsCTMInterfaceConfigType | read-only | mandatory | Sets the type of interface access attribute for the SFCS interfaces. Access ports allow single user or shared access and perform statisics and control; network… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.3 | ColumnsfcsCTMInterfacePeakBufferUseage | read-only | mandatory | Indicates the number of cells in transmit buffer memory. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.4 | ColumnsfcsCTMInterfaceConfigNumberOfQueues | read-only | mandatory | Indicates the number of priority queues configured on this interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.5 | ColumnsfcsCTMInterfaceConfigSigStackID | read-only | mandatory | Indicates the user signalling stack ID for this interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.6 | ColumnsfcsCTMInterfaceConfigClocking | read-write | mandatory | The anim clocking source. one - use the generated-transmit-clock two - use the channel-recovered-clock three - use the system-master-clock four - option not su… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.7 | ColumnsfcsCTMInterfaceConfigNextVPI | read-only | mandatory | Indicates the next vpi for this interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.8 | ColumnsfcsCTMInterfaceConfigNextVCI | read-only | mandatory | Indicates the next vci for this interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2 | NodesfcsCTMInterfaceStatistics | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1 | TablesfcsCTMInterfaceStatsTable | not-accessible | mandatory | This table contains the cell counts for each SFCS switch interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1 | RowsfcsCTMInterfaceStatsEntry | not-accessible | mandatory | Specifies the SFCS cell counts for the SFCS interface for which this entry exists. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.1 | ColumnsfcsCTMInterfaceStatsInterfaceIndex | read-only | mandatory | The index which specifies which interface we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.2 | ColumnsfcsCTMInterfaceStatsRxErrors | read-only | mandatory | Indicates the number of receive path lookup invalid and out of range errors. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.3 | ColumnsfcsCTMInterfaceStatsVPILookupInvalidErrors | read-only | mandatory | Indicates the number of VPI lookup invalid and out of range errors. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.4 | ColumnsfcsCTMInterfaceStatsRxCnxLookupInvalidErrors | read-only | mandatory | Indicates the number of receive connection lookup invalid errors. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.7 | ColumnsfcsCTMInterfaceStatsRxCellCnt | read-only | mandatory | Indicates the number of receive cells on this interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.8 | ColumnsfcsCTMInterfaceStatsTxCellCnt | read-only | mandatory | Indicates the number of transmit cells on this interface. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.9 | ColumnsfcsCTMInterfaceStatsOverflowDropCellCnt | read-only | mandatory | Indicates the number of cells that were dropped due to queue overflows. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3 | NodesfcsCTMQueueConfig | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1 | TablesfcsCTMQueueConfigTable | not-accessible | mandatory | This table contains the configuration information for all queues on the SFCS. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1 | RowsfcsCTMQueueConfigEntry | not-accessible | mandatory | Each entry specifies the queue information for the SFCS switch for which the entry exists. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.1 | ColumnsfcsCTMQueueConfigInterfaceIndex | read-only | mandatory | The index which specifies which interface we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.2 | ColumnsfcsCTMQueueConfigQueueIndex | read-only | mandatory | The index which specifies which transmit queue we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.3 | ColumnsfcsCTMQueueConfigQueueSize | read-write | mandatory | Indicates the size of the transmit queue for this queue instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.4 | ColumnsfcsCTMQueueConfigQueueBandwidth | read-write | mandatory | Indicates the percentage of this interface's bandwidth utilized by this particular queue. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.5 | ColumnsfcsCTMQueueConfigClpDropThreshold | read-write | mandatory | Indicates the queue level to start dropping CLP=1 cells for this queue. This level is expressed as the percentage of this queue's size. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.6 | ColumnsfcsCTMQueueConfigCongestionThreshold | read-write | mandatory | Indicates the level to consider this queue congested. This level is expressed as the percentage of this queue's size. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.7 | ColumnsfcsCTMQueueConfigEFCILowThreshold | read-write | mandatory | Indicates the lower threshold used for EFCI for this queue instance. This level is expressed as the percentage of this queue's size. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.8 | ColumnsfcsCTMQueueConfigRMThreshold | read-write | mandatory | Indicates the remote management queue threshold expressed as a percentage of the queue's size. When this level is hit, a management message is sent to the send… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4 | NodesfcsCTMQueueStatistics | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1 | TablesfcsCTMQueueStatsTable | not-accessible | mandatory | This table contains the statistics information for all queues on the SFCS. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1 | RowsfcsCTMQueueStatsEntry | not-accessible | mandatory | Each entry specifies the queue information for the SFCS switch for which the entry exists. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.1 | ColumnsfcsCTMQueueStatsInterfaceIndex | read-only | mandatory | The index which specifies which interface we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.2 | ColumnsfcsCTMQueueStatsQueue | read-only | mandatory | The index which specifies which queue we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.3 | ColumnsfcsCTMQueueStatsTxClpCellsDiscarded | read-only | mandatory | Indicates the number of cells with CLP=1 that were discarded for this queue instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.4 | ColumnsfcsCTMQueueStatsTxCellsDropped | read-only | mandatory | Indicates the number of cells that overflowed the buffer for this queue instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.5 | ColumnsfcsCTMQueueStatsQueuePeakLevel | read-only | mandatory | Indicates the peak level since last read for this queue instance. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.6 | ColumnsfcsCTMQueueStatsTxCellCnt | read-only | mandatory | Indicates the transmit cell count on a per queue basis. A value of zero indicates not available |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12 | NodesfcsBWMgr | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1 | NodesfcsBwNims | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1 | TablesfcsBwNimsTable | not-accessible | mandatory | This table contains the Nim Oid and the Nim Administrative Status reading functions. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1 | RowsfcsBwNimsEntry | not-accessible | mandatory | Each entry contains a Nim Oid and the Nim Administrative Status. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.1 | ColumnsfcsBwNimsIndex | read-only | mandatory | This index specifies which NIM we are dealing with. This reference is in the same format as MIB II's Interface index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.2 | ColumnsfcsBwNimsAdminStatus | read-write | mandatory | Indicates the administrative status of this Nim. 10 - Active 20 - Inactive |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.3 | ColumnsfcsBWNimsBuffCount | read-only | mandatory | The number of transmit buffers for this NIM |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.4 | ColumnsfcsBWNimsPortCount | read-only | mandatory | The number of ports for this NIM |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.5 | ColumnsfcsBWNimsPrioCount | read-only | mandatory | The number of priority queues for this NIM |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2 | NodesfcsBwPorts | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1 | TablesfcsBwPortsTable | not-accessible | mandatory | This table contains the Port Oid, Port Administrative Status and the forward/reverse physical bandwidth reading functions. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1 | RowsfcsBwPortsEntry | not-accessible | mandatory | Each entry contains the Port Oid, Port Administrative Status and the forward/reverse physical bandwidth. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.1 | ColumnsfcsBwPortsIndex | read-only | mandatory | This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.2 | ColumnsfcsBwPortsAdminStatus | read-write | mandatory | Indicates the administrative status of this Port. 10 - Active 20 - Inactive |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.3 | ColumnsfcsBwPortsPhysBwFwd | read-only | mandatory | This is the forward physical bandwidth of the port in cells/sec. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.4 | ColumnsfcsBwPortsPhysBwRev | read-only | mandatory | This is the reverse physical bandwidth of the port in cells/sec. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.5 | ColumnsfcsBwPortsZone | read-only | mandatory | The range of the current bw operational point for this port. If a value has never been set the value will be -1. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.6 | ColumnsfcsBwPortsMetric | read-only | mandatory | The current bw operational point for this port. If a value has never been set the value will be -1. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3 | NodesfcsBwPortPools | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1 | TablesfcsBwPortPoolLimitsTable | not-accessible | mandatory | This table contains |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1 | RowsfcsBwPortPoolLimitsEntry | not-accessible | mandatory | Each entry contains |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.1 | ColumnsfcsBwPortPoolLimitsIndex | read-only | mandatory | This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.2 | ColumnsfcsBwPortPoolLimitsPoolIndex | read-only | mandatory | This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.3 | ColumnsfcsBwPortPoolLimitsMaxAllocBwFwd | read-write | mandatory | Upper Limit for BW to be allocated forward direction. It is defaulted to the physical BW and is set by administrative action. Can't be set to a value greater t… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.4 | ColumnsfcsBwPortPoolLimitsMaxAllocBwRev | read-write | mandatory | Upper Limit for BW to be allocated reverse direction. It is defaulted to the physical BW and is set by administrative action. Can't be set to a value greater t… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.5 | ColumnsfcsBwPortPoolLimitsBwAllocStrat | read-write | mandatory | Determines which of 3 sets of formulas will be used for computing the amount of variable bandwidth to be allocated. Conservative allocates the full amount of v… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.6 | ColumnsfcsBwPortPoolLimitsBwConstant | read-write | mandatory | A ratio used in formulas for computing the amount of variable bandwidth to be allocated. Valid values are 1-255 which is the numerator of a fraction whose fixe… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.7 | ColumnsfcsBwPortPoolLimitsCBRLimitFwd | read-write | mandatory | A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allo… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.8 | ColumnsfcsBwPortPoolLimitsCBRLimitRev | read-write | mandatory | A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allo… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.9 | ColumnsfcsBwPortPoolLimitsABRLimitFwd | read-write | mandatory | A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allo… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.10 | ColumnsfcsBwPortPoolLimitsABRLimitRev | read-write | mandatory | A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allo… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.11 | ColumnsfcsBwPortPoolLimitsVBRLimitFwd | read-write | mandatory | A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allo… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.12 | ColumnsfcsBwPortPoolLimitsVBRLimitRev | read-write | mandatory | A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allo… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.13 | ColumnsfcsBwPortPoolLimitsUBRLimitFwd | read-write | mandatory | A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allo… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.14 | ColumnsfcsBwPortPoolLimitsUBRLimitRev | read-write | mandatory | A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allo… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.15 | ColumnsfcsBwPortPoolLimitsUBRConnLimitFwd | read-write | mandatory | A Limit to the number of UBR connections which can be established through this port. The limit applies to both user connections and management connections. The… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.16 | ColumnsfcsBwPortPoolLimitsUBRConnLimitRev | read-write | mandatory | A Limit to the number of UBR connections which can be established through this port. The limit applies to both user connections and management connections. The… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2 | TablesfcsBwPortPoolStatTable | not-accessible | mandatory | This table contains |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1 | RowsfcsBwPortPoolStatEntry | not-accessible | mandatory | Each entry contains |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.1 | ColumnsfcsBwPortPoolStatsIndex | read-only | mandatory | This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.2 | ColumnsfcsBwPortPoolStatsPoolIndex | read-only | mandatory | This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.3 | ColumnsfcsBwPortPoolStatConnCntFwd | read-only | mandatory | The current total number of calls in the forward direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.4 | ColumnsfcsBwPortPoolStatConnCntRev | read-only | mandatory | The current total number of calls in the reverse direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.5 | ColumnsfcsBwPortPoolStatAllocBwFwd | read-only | mandatory | The current amount of allocated Bw in the forward direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.6 | ColumnsfcsBwPortPoolStatAllocBwRev | read-only | mandatory | The current amount of allocated Bw in the reverse direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.7 | ColumnsfcsBwPortPoolStatAvailBwFwd | read-only | mandatory | The current amount of available Bw in the forward direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.8 | ColumnsfcsBwPortPoolStatAvailBwRev | read-only | mandatory | The current amount of available Bw in the reverse direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.9 | ColumnsfcsBwPortPoolStatPeakBwFwd | read-only | mandatory | The peak amount of allocated Bw in the forward direction since the port was initialized OR the switch was reset. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.10 | ColumnsfcsBwPortPoolStatPeakBwRev | read-only | mandatory | The peak amount of allocated Bw in the reverse direction since the port was initialized OR the switch was reset. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.11 | ColumnsfcsBwPortPoolStatRejConnFwd | read-only | mandatory | The number of connections which were rejected because of insufficient forward bandwidth since the port was initialized or the switch was reset last. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.12 | ColumnsfcsBwPortPoolStatRejConnRev | read-only | mandatory | The number of connections which were rejected because of insufficient reverse bandwidth since the port was initialized or the switch was reset last. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.13 | ColumnsfcsBwPortPoolStatPrevAdverMAXCRFwd | read-only | mandatory | The amount of physical forward BW reported to PNNI in the latest reporting period. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.14 | ColumnsfcsBwPortPoolStatPrevAdverMAXCRRev | read-only | mandatory | The amount of physical reverse BW reported to PNNI in the latest reporting period. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.15 | ColumnsfcsBwPortPoolStatPrevAdverAvailCRFwd | read-only | mandatory | The amount of avail forward BW reported to PNNI in the latest reporting period. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.16 | ColumnsfcsBwPortPoolStatPrevAdverAvailCRRev | read-only | mandatory | The amount of avail reverse BW reported to PNNI in the latest reporting period. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.17 | ColumnsfcsBwPortPoolStatCBRConnCntFwd | read-only | mandatory | The number of currently established CBR connections for the forward direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.18 | ColumnsfcsBwPortPoolStatCBRConnCntRev | read-only | mandatory | The number of currently established CBR connections for the reverse direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.19 | ColumnsfcsBwPortPoolStatCBRConnRejFwd | read-only | mandatory | The number of CBR forward connections rejected since the port was initialized or the switch was reset last. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.20 | ColumnsfcsBwPortPoolStatCBRConnRejRev | read-only | mandatory | The number of CBR reverse connections rejected since the port was initialized or the switch was reset last. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.21 | ColumnsfcsBwPortPoolStatCBRAllocBwFwd | read-only | mandatory | The amount of forward allocated Bw that is CBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.22 | ColumnsfcsBwPortPoolStatCBRAllocBwRev | read-only | mandatory | The amount of reverse allocated Bw that is CBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.23 | ColumnsfcsBwPortPoolStatCBRAggPCRFwd | read-only | mandatory | The aggregated forward PCR for all established CBR connections. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.24 | ColumnsfcsBwPortPoolStatCBRAggPCRRev | read-only | mandatory | The aggregated reverse PCR for all established CBR connections. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.25 | ColumnsfcsBwPortPoolStatCBRPrevAdverMAXCTD | read-only | mandatory | The maxCTD for the forward direction reported to PNNI for the last update period for CBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.26 | ColumnsfcsBwPortPoolStatCBRPrevAdverCDV | read-only | mandatory | The CDV for the forward direction reported to PNNI for the last update period for CBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.27 | ColumnsfcsBwPortPoolStatABRConnCntFwd | read-only | mandatory | The number of currently established ABR connections for the forward direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.28 | ColumnsfcsBwPortPoolStatABRConnCntRev | read-only | mandatory | The number of currently established ABR connections for the reverse direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.29 | ColumnsfcsBwPortPoolStatABRConnRejFwd | read-only | mandatory | The number of ABR forward connections rejected since the port was initialized or the switch was reset last. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.30 | ColumnsfcsBwPortPoolStatABRConnRejRev | read-only | mandatory | The number of ABR reverse connections rejected since the port was initialized or the switch was reset last. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.31 | ColumnsfcsBwPortPoolStatABRAllocBwFwd | read-only | mandatory | The amount of forward allocated Bw that is ABR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.32 | ColumnsfcsBwPortPoolStatABRAllocBwRev | read-only | mandatory | The amount of reverse allocated Bw that is ABR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.33 | ColumnsfcsBwPortPoolStatABRAggPCRFwd | read-only | mandatory | The aggregated forward PCR for all established ABR connections. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.34 | ColumnsfcsBwPortPoolStatABRAggPCRRev | read-only | mandatory | The aggregated reverse PCR for all established ABR connections. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.35 | ColumnsfcsBwPortPoolStatABRPrevAdverMAXCTD | read-only | mandatory | The maxCTD for the forward direction reported to PNNI for the last update period for ABR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.36 | ColumnsfcsBwPortPoolStatABRPrevAdverCDV | read-only | mandatory | The CDV for the forward direction reported to PNNI for the last update period for ABR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.37 | ColumnsfcsBwPortPoolStatVBRConnCntFwd | read-only | mandatory | The number of currently established VBR connections for the forward direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.38 | ColumnsfcsBwPortPoolStatVBRConnCntRev | read-only | mandatory | The number of currently established VBR connections for the reverse direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.39 | ColumnsfcsBwPortPoolStatVBRConnRejFwd | read-only | mandatory | The number of VBR forward connections rejected since the port was initialized or the switch was reset last. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.40 | ColumnsfcsBwPortPoolStatVBRConnRejRev | read-only | mandatory | The number of VBR reverse connections rejected since the port was initialized or the switch was reset last. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.41 | ColumnsfcsBwPortPoolStatVBRAllocBwFwd | read-only | mandatory | The amount of forward allocated Bw that is VBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.42 | ColumnsfcsBwPortPoolStatVBRAllocBwRev | read-only | mandatory | The amount of reverse allocated Bw that is VBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.43 | ColumnsfcsBwPortPoolStatVBRAggPCRFwd | read-only | mandatory | The aggregated forward PCR for all established VBR connections. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.44 | ColumnsfcsBwPortPoolStatVBRAggPCRRev | read-only | mandatory | The aggregated reverse PCR for all established VBR connections. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.45 | ColumnsfcsBwPortPoolStatVBRPrevAdverMAXCTD | read-only | mandatory | The maxCTD for the forward direction reported to PNNI for the last update period for VBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.46 | ColumnsfcsBwPortPoolStatVBRPrevAdverCDV | read-only | mandatory | The CDV for the forward direction reported to PNNI for the last update period for VBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.47 | ColumnsfcsBwPortPoolStatUBRConnCntFwd | read-only | mandatory | The number of currently established UBR connections for the forward direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.48 | ColumnsfcsBwPortPoolStatUBRConnCntRev | read-only | mandatory | The number of currently established UBR connections for the reverse direction. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.49 | ColumnsfcsBwPortPoolStatUBRConnRejFwd | read-only | mandatory | The number of UBR forward connections rejected since the port was initialized or the switch was reset last. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.50 | ColumnsfcsBwPortPoolStatUBRConnRejRev | read-only | mandatory | The number of UBR reverse connections rejected since the port was initialized or the switch was reset last. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.51 | ColumnsfcsBwPortPoolStatUBRAllocBwFwd | read-only | mandatory | The amount of forward allocated Bw that is UBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.52 | ColumnsfcsBwPortPoolStatUBRAllocBwRev | read-only | mandatory | The amount of reverse allocated Bw that is UBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.53 | ColumnsfcsBwPortPoolStatUBRAggPCRFwd | read-only | mandatory | The aggregated forward PCR for all established UBR connections. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.54 | ColumnsfcsBwPortPoolStatUBRAggPCRRev | read-only | mandatory | The aggregated reverse PCR for all established UBR connections. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.55 | ColumnsfcsBwPortPoolStatUBRPrevAdverMAXCTD | read-only | mandatory | The maxCTD for the forward direction reported to PNNI for the last update period for UBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.56 | ColumnsfcsBwPortPoolStatUBRPrevAdverCDV | read-only | mandatory | The CDV for the forward direction reported to PNNI for the last update period for UBR service class. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3 | TablesfcsBwPortPoolTrapMgmtTable | not-accessible | mandatory | This table contains |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1 | RowsfcsBwPortPoolTrapMgmtEntry | not-accessible | mandatory | Each entry contains |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.1 | ColumnsfcsBwPortPoolTrapMgmtIndex | read-only | mandatory | This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.2 | ColumnsfcsBwPortPoolTrapMgmtPoolIndex | read-only | mandatory | This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index. (If it has never been set, t… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.3 | ColumnsfcsBwPortPoolTrapMgmtAllocBwTholdHiFwd | read-write | mandatory | The upper threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bw to exceed this value the trap is generated. (If it has neve… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.4 | ColumnsfcsBwPortPoolTrapMgmtAllocBwTholdHiRev | read-write | mandatory | The upper threshold for the Alloc BW rev trap. When an allocation causes the currently allocated bw to exceed this value the trap is generated. (If it has neve… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.5 | ColumnsfcsBwPortPoolTrapMgmtAllocBwTholdLoFwd | read-write | mandatory | The lower threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bw be below this value the trap is generated. (If it has never… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.6 | ColumnsfcsBwPortPoolTrapMgmtAllocBwTholdLoRev | read-write | mandatory | The lower threshold for the Alloc BW rev trap. When an allocation causes the currently allocated bw be below this value the trap is generated. (If it has never… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.7 | ColumnsfcsBwPortPoolTrapMgmtPeakBwTholdFwd | read-write | mandatory | The upper threshold for the Peak BW fwd trap. When an allocation causes the allocated BW to exceed this value the trap is generated. (If it has never been set,… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.8 | ColumnsfcsBwPortPoolTrapMgmtPeakBwTholdRev | read-write | mandatory | The upper threshold for the Peak BW rev trap. When an allocation causes the allocated BW to exceed this value the trap is generated. (If it has never been set,… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.9 | ColumnsfcsBwPortPoolTrapMgmtHoldDownTime | read-write | mandatory | The time between traps of the same type. If a trap of a particular type is generated for a particular port, another of that type for that port will not be gene… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.10 | ColumnsfcsBwPortPoolTrapMgmtCBRConnCntTholdHiFwd | read-write | mandatory | The upper threshold for the CBR connection count Fwd trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.11 | ColumnsfcsBwPortPoolTrapMgmtCBRConnCntTholdHiRev | read-write | mandatory | The upper threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.12 | ColumnsfcsBwPortPoolTrapMgmtCBRConnCntTholdLoFwd | read-write | mandatory | The lower threshold for the CBR connection count Fwd trap. When an allocation causes the CBR connection count to fall below this value, the trap is generated. … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.13 | ColumnsfcsBwPortPoolTrapMgmtCBRConnCntTholdLoRev | read-write | mandatory | The lower threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to fall below this value, the trap is generated. … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.14 | ColumnsfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiFwd | read-write | mandatory | The upper threshold for the CBR Allocated Bw Fwd trap. When an allocation causes the CBR Allocated Bw to exceed this value, the trap is generated. (If it has n… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.15 | ColumnsfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiRev | read-write | mandatory | The upper threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.16 | ColumnsfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoFwd | read-write | mandatory | The lower threshold for the CBR Allocated Bw Fwd trap. When an allocation causes the CBR Allocated Bw to fall below this value, the trap is generated. (If it h… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.17 | ColumnsfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoRev | read-write | mandatory | The lower threshold for the CBR Allocated Bw Rev trap. When an allocation causes the CBR Allocated Bw to fall below this value, the trap is generated. (If it h… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.18 | ColumnsfcsBwPortPoolTrapMgmtABRConnCntTholdHiFwd | read-write | mandatory | The upper threshold for the ABR connection count Fwd trap. When an allocation causes the ABR connection count to exceed this value, the trap is generated. (If … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.19 | ColumnsfcsBwPortPoolTrapMgmtABRConnCntTholdHiRev | read-write | mandatory | The upper threshold for the ABR connection count Rev trap. When an allocation causes the ABR connection count to exceed this value, the trap is generated. (If … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.20 | ColumnsfcsBwPortPoolTrapMgmtABRConnCntTholdLoFwd | read-write | mandatory | The lower threshold for the ABR connection count Fwd trap. When an allocation causes the ABR connection count to fall below this value, the trap is generated. … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.21 | ColumnsfcsBwPortPoolTrapMgmtABRConnCntTholdLoRev | read-write | mandatory | The lower threshold for the ABR connection count Rev trap. When an allocation causes the ABR connection count to fall below this value, the trap is generated. … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.22 | ColumnsfcsBwPortPoolTrapMgmtABRAllocBwTholdHiFwd | read-write | mandatory | The upper threshold for the ABR Allocated Bw Fwd trap. When an allocation causes the ABR Allocated Bw to exceed this value, the trap is generated. (If it has n… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.23 | ColumnsfcsBwPortPoolTrapMgmtABRAllocBwTholdHiRev | read-write | mandatory | The upper threshold for the ABR Allocated Bw Rev trap. When an allocation causes the ABR Allocated Bw to exceed this value, the trap is generated. (If it has n… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.24 | ColumnsfcsBwPortPoolTrapMgmtABRAllocBwTholdLoFwd | read-write | mandatory | The lower threshold for the ABR Allocated Bw Fwd trap. When an allocation causes the ABR Allocated Bw to fall below this value, the trap is generated. (If it h… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.25 | ColumnsfcsBwPortPoolTrapMgmtABRAllocBwTholdLoRev | read-write | mandatory | The lower threshold for the ABR Allocated Bw Rev trap. When an allocation causes the ABR Allocated Bw to fall below this value, the trap is generated. (If it h… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.26 | ColumnsfcsBwPortPoolTrapMgmtVBRConnCntTholdHiFwd | read-write | mandatory | The upper threshold for the VBR connection count Fwd trap. When an allocation causes the VBR connection count to exceed this value, the trap is generated. (If … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.27 | ColumnsfcsBwPortPoolTrapMgmtVBRConnCntTholdHiRev | read-write | mandatory | The upper threshold for the VBR connection count Rev trap. When an allocation causes the VBR connection count to exceed this value, the trap is generated. (If … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.28 | ColumnsfcsBwPortPoolTrapMgmtVBRConnCntTholdLoFwd | read-write | mandatory | The lower threshold for the VBR connection count Fwd trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.29 | ColumnsfcsBwPortPoolTrapMgmtVBRConnCntTholdLoRev | read-write | mandatory | The lower threshold for the VBR connection count Rev trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.30 | ColumnsfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiFwd | read-write | mandatory | The upper threshold for the VBR Allocated Bw Fwd trap. When an allocation causes the VBR Allocated Bw to exceed this value, the trap is generated. (If it has n… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.31 | ColumnsfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiRev | read-write | mandatory | The upper threshold for the VBR Allocated Bw Rev trap. When an allocation causes the VBR Allocated Bw to exceed this value, the trap is generated. (If it has n… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.32 | ColumnsfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoFwd | read-write | mandatory | The lower threshold for the VBR Allocated Bw Fwd trap. When an allocation causes the VBR Allocated Bw to fall below this value, the trap is generated. (If it h… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.33 | ColumnsfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoRev | read-write | mandatory | The lower threshold for the VBR Allocated Bw Rev trap. When an allocation causes the VBR Allocated Bw to fall below this value, the trap is generated. (If it h… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.34 | ColumnsfcsBwPortPoolTrapMgmtUBRConnCntTholdHiFwd | read-write | mandatory | The upper threshold for the UBR connection count Fwd trap. When an allocation causes the UBR connection count to exceed this value, the trap is generated. (If … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.35 | ColumnsfcsBwPortPoolTrapMgmtUBRConnCntTholdHiRev | read-write | mandatory | The upper threshold for the UBR connection count Rev trap. When an allocation causes the UBR connection count to exceed this value, the trap is generated. (If … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.36 | ColumnsfcsBwPortPoolTrapMgmtUBRConnCntTholdLoFwd | read-write | mandatory | The lower threshold for the UBR connection count Fwd trap. When an allocation causes the UBR connection count to fall below this value, the trap is generated. … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.37 | ColumnsfcsBwPortPoolTrapMgmtUBRConnCntTholdLoRev | read-write | mandatory | The lower threshold for the UBR connection count Rev trap. When an allocation causes the UBR connection count to fall below this value, the trap is generated. … |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.38 | ColumnsfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiFwd | read-write | mandatory | The upper threshold for the UBR Allocated Bw Fwd trap. When an allocation causes the UBR Allocated Bw to exceed this value, the trap is generated. (If it has n… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.39 | ColumnsfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiRev | read-write | mandatory | The upper threshold for the UBR Allocated Bw Rev trap. When an allocation causes the UBR Allocated Bw to exceed this value, the trap is generated. (If it has n… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.40 | ColumnsfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoFwd | read-write | mandatory | The lower threshold for the UBR Allocated Bw Fwd trap. When an allocation causes the UBR Allocated Bw to fall below this value, the trap is generated. (If it h… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.41 | ColumnsfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoRev | read-write | mandatory | The lower threshold for the UBR Allocated Bw Rev trap. When an allocation causes the UBR Allocated Bw to fall below this value, the trap is generated. (If it h… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.42 | ColumnsfcsBWPortPoolTrapMgmtBuffUpThold | read-write | mandatory | The upper threshold for buffer allocation trap . |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.43 | ColumnsfcsBWPortPoolTrapMgmtBuffLoThold | read-write | mandatory | The lower threshold for buffer allocation trap . |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.44 | ColumnsfcsBWPortPoolTrapMgmtConnRejThold | read-write | mandatory | The lower threshold for conn rejects trap . |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4 | NodesfcsBuffPools | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1 | TablesfcsBuffPrioTable | not-accessible | mandatory | This table contains the rows of all the buffer pools. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1 | RowsfcsBuffPrioEntry | not-accessible | mandatory | Each entry contains the rows of all the buffer pools. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.1 | ColumnsfcsBuffPrioPortIndex | read-only | mandatory | This index specifies which port we are dealing with. This reference is in the same format as MIB II's Interface index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.2 | ColumnsfcsBuffPrioPriority | read-only | mandatory | This index specifies which priority we are dealing with. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.3 | ColumnsfcsBuffPrioAssignCtl | read-only | mandatory | The status of how assignment is controlled. Static,Manual,Adaptive. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.4 | ColumnsfcsBuffPrioMinCtl | read-write | mandatory | The minimum number of cells which can be assigned to this port/prioity. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.5 | ColumnsfcsBuffPrioAssigned | read-write | mandatory | The number of cells which are currently assigned to this port/priority. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.6 | ColumnsfcsBuffPrioAllocated | read-only | mandatory | The number of assigned cells which are currently allocated to VCs for this port/priority. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.7 | ColumnsfcsBuffPrioAvailable | read-only | mandatory | The number of assigned cells which are free to be allocated. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.8 | ColumnsfcsBuffPrioPeakAlloc | read-only | mandatory | The peak number of cells which have been allocated to this port/priority. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.9 | ColumnsfcsBuffPrioConnRejs | read-write | mandatory | The number of connections rejected because of a lack of buffers. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.10 | ColumnsfcsBuffPrioUpTholdTrap | read-write | mandatory | The upper threshold of allocations to trigger an upper thold trap. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.11 | ColumnsfcsBuffPrioLoTholdTrap | read-write | mandatory | The lower threshold of allocations to trigger a lower thold trap. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.12 | ColumnsfcsBuffPrioConnRejThold | read-write | mandatory | The lower threshold of conn rejects trap because of inadequate buffers. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13 | NodesfcsProxy | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1 | NodesfcsProxyConfig | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1 | TablesfcsProxyConfigTable | not-accessible | mandatory | This table contains the config info and a port reading function. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1 | RowsfcsProxyConfigEntry | not-accessible | mandatory | Each entry contains ANIM Proxy config info or a function. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.1 | ColumnsfcsProxyConfigANIMIndex | read-only | mandatory | This index specifies which ANIM Proxy we are dealing with. This reference is in the same format as MIB II's Interface index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.2 | ColumnsfcsProxyConfigNUMPORTS | read-only | mandatory | Indicates the number of ports per Proxy which is always 4. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.3 | ColumnsfcsProxyConfigTxMemSize | read-only | mandatory | Indicates the size of the port's Transmission memory in K. The memory size is always 1K. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.4 | ColumnsfcsProxyConfigRxMaxPduSize | read-only | mandatory | Indicates the size of the port's Transmission memory in K. The memory size is always 1K. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.5 | ColumnsfcsProxyConfigBandWidth | read-only | mandatory | Indicates the bandwidth for the port, which is ????? |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.6 | ColumnsfcsProxyConfigTransmitDone | read-only | mandatory | Checks if the Transmission has finished. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.7 | ColumnsfcsProxyConfigReceiveFifoState | read-only | mandatory | Checks if the port's receive Fifo is full or not. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.8 | ColumnsfcsProxyConfigPortTransmitMode | read-write | mandatory | Controls Transmission of cells in port Transmit memory. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.9 | ColumnsfcsProxyConfigReceiveFifoReset | write-only | mandatory | Controls the receive buffer's memory. Reset clears memory. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.10 | ColumnsfcsProxyConfigTxFifoReset | write-only | mandatory | Controls the port's transmit memory. Reset clears memory. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.11 | ColumnsfcsProxyConfigReceiveMode | read-write | mandatory | Controls whether or not the port receives cells. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.12 | ColumnsfcsProxyConfigCaptureMode | read-write | mandatory | Controls how much of the cell is received. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.13 | ColumnsfcsProxyConfigInitPort | write-only | mandatory | Setting this returns the port to the initial setup. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.14 | ColumnsfcsProxyConfigLoad | read-write | mandatory | Transmit load for port. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.15 | ColumnsfcsProxyConfigGumbo | read-only | mandatory | Unreadable octet string used for control information. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2 | NodesfcsProxyTrans | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1 | TablesfcsProxyTransTable | not-accessible | mandatory | This table contains the arguments and the function for the Transmit function. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1 | RowsfcsProxyTransEntry | not-accessible | mandatory | The entries are the arguments for the Transmit function. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.1 | ColumnsfcsProxyTransANIMIndex | read-only | mandatory | This index specifies which ANIM Port we are dealing with. This reference is in the same format as MIB II's Interface Index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.2 | ColumnsfcsProxyTransEncodeNewPdu | write-only | mandatory | Setting this encodes a new PDU based on the current PDU parameters into the port's transmit memory. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.3 | ColumnsfcsProxyTransVPI | read-write | mandatory | This is the VPI for the PDU. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.4 | ColumnsfcsProxyTransVCI | read-write | mandatory | This is the VCI for the PDU. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.5 | ColumnsfcsProxyTransPTI | read-write | mandatory | Payload Type Indicator: the value of the 3 bit Payload Type field in the header. The most signifigant bit indicates user or control data, the next bit indicate… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.6 | ColumnsfcsProxyTransCLP | read-write | mandatory | The cell loss priority: 1 or 0. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.7 | ColumnsfcsProxyTransPayloadType | read-write | mandatory | The payload type for the cell. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.8 | ColumnsfcsProxyTransPayloadLength | read-write | mandatory | The length of the payload in bytes. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.9 | ColumnsfcsProxyTransPayloadData | read-write | mandatory | If the payload type is user input, this is the payload itself. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.10 | ColumnsfcsProxyTransCount | read-write | mandatory | Number of copies of the pdu to encode in port transmit memory. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.11 | ColumnsfcsProxyTransPayloadAdaptionLayer | read-write | mandatory | The format of the payload: either raw cells or AAL5. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.12 | ColumnsfcsProxyTransMpxMethod | read-write | mandatory | The format of the payload: either raw cells or AAL5. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.13 | ColumnsfcsProxyTransControl | read-write | mandatory | Controls how many times to send what's in the port's transmit memory. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.14 | ColumnsfcsProxyTransGumbo | read-only | mandatory | Returns the vpi, vci, pti, clp, payload_type, payload_length, count, PAL, mpx method, and control entires for this table in a string where the entries are sepa… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3 | NodesfcsProxyRead | |||
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1 | TablesfcsProxyReadTable | not-accessible | mandatory | This table contains information read from the cells in the receive fifo. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1 | RowsfcsProxyReadEntry | not-accessible | mandatory | The entries are the information about the cells or the PDU. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.1 | ColumnsfcsProxyReadANIMIndex | read-only | mandatory | This index specifies which ANIM Port we are dealing with. This reference is in the same format as the MIB II Interface Index. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.2 | ColumnsfcsProxyReadMode | read-write | mandatory | How the receive fifo is read. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.3 | ColumnsfcsProxyReadNewPdu | write-only | mandatory | Pops a new Pdu from the receive fifo to be examined and read. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.4 | ColumnsfcsProxyReadGumbo | write-only | mandatory | Unreadable control information. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.5 | ColumnsfcsProxyReadVPI | read-only | mandatory | This is the VPI for the PDU. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.6 | ColumnsfcsProxyReadVCI | read-only | mandatory | This is the VCI for the PDU. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.7 | ColumnsfcsProxyReadPTI | read-only | mandatory | Payload Type Indicator: the value of the 3 bit Payload Type field in the header. The most signifigant bit indicates user or control data, the next bit indicate… |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.8 | ColumnsfcsProxyReadCLP | read-only | mandatory | The cell loss priority: 1 or 0. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.9 | ColumnsfcsProxyReadDataLength | read-only | mandatory | The length of the PDU in bytes. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.10 | ColumnsfcsProxyReadData | read-only | mandatory | The actual data of the PDU. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.11 | ColumnsfcsProxyReadPal | read-only | mandatory | The format of the payload: either raw cells or AAL5. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.12 | ColumnsfcsProxyReadInbyteslosts | read-only | mandatory | The number of bytes that were dropped while reading. Usually because they occurred before the Start of Cell was discovered. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.13 | ColumnsfcsProxyReadInCells | read-only | mandatory | The number of cells read since this port was last reset. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.14 | ColumnsfcsProxyReadInError | read-only | mandatory | The number of pdu's that had to be dropped due to errors. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.15 | ColumnsfcsProxyReadInCellReadError | read-only | mandatory | The number of cells that had to be dropped due to errors. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.16 | ColumnsfcsProxyReadInHecError | read-only | mandatory | The number of cell headers that contained errors. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.17 | ColumnsfcsProxyReadInTooBigError | read-only | mandatory | The number of pdu's that were too large to be received. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.18 | ColumnsfcsProxyReadInCRCError | read-only | mandatory | The number of pdu's that failed the CRC check. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.19 | ColumnsfcsProxyReadInLengthMismatchError | read-only | mandatory | The length stored in the pdu did not match the actual length of the pdu read in. |
| 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.20 | ColumnsfcsProxyReadInTotalCells | read-only | mandatory | Total number of cells read in by the snapshot. |