CTRON-SFPS-BASE-MIB
133 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-SFPS-INCLUDE-MIB | 2 sfpsCPResources sfpsATalkAMRVLANControl sfpsBlockSource sfpsBlockSourceAPI sfpsBlockSourceExclude sfpsBlockSourceOnly sfpsBlockSourcePort sfpsBlockSourceStats sfpsCSPControl sfpsDHCPServerVLAN sfpsServiceCenter |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | -- Counter -- enterprises -- IpAddress Gauge TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1 | TablesfpsCPResourcesTable | not-accessible | mandatory | This table contains all Call Processors registered with the CPResources Table and is indexed by the Call Processor id. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1 | RowsfpsCPResourcesTableEntry | not-accessible | mandatory | Each entry contains information pertaining to a Call Processor. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.1 | ColumnsfpsCPResourcesTableId | read-only | mandatory | Call Processor id used to index into the table. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.2 | ColumnsfpsCPResourcesTableName | read-only | mandatory | The name of the associated Call Processor. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.3 | ColumnsfpsCPResourcesTableOperStatus | read-only | mandatory | Operational state of entry. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.4 | ColumnsfpsCPResourcesTableAdminStatus | read-only | mandatory | This value represents the current administration status of the associated Call Processor. When enabled(3) the Call Processor is still allowed to call process p… |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.5 | ColumnsfpsCPResourcesTableStateTime | read-only | mandatory | The last time that this Call Processor has changed states. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.6 | ColumnsfpsCPResourcesTablePtsIn | read-only | mandatory | The number of packets that have been sent to this Call Processor to be handled. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.7 | ColumnsfpsCPResourcesTablePtsUsed | read-only | mandatory | The number of packets that have been sent to this Call Processor and accepted for the purpose of processing. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.8 | ColumnsfpsCPResourcesTablePolicyFlood | read-only | mandatory | Number of packets flooded due to Policy. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.9 | ColumnsfpsCPResourcesResolveFlood | read-only | mandatory | Number of packets flooded due to not able to Resolve. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.10 | ColumnsfpsCPResourcesConnectOK | read-only | mandatory | Number of packets that caused a successful connect. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.11 | ColumnsfpsCPResourcesDuplicate | read-only | mandatory | Number of packets that were duplicates of an existing call. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.12 | ColumnsfpsCPResourcesDiscoverOnly | read-only | mandatory | Number of packets that the switch only discovered information. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.13 | ColumnsfpsCPResourcesDiscoverError | read-only | mandatory | Number of packets that the switch could not discover information. Something was wrong with the packet. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.14 | ColumnsfpsCPResourcesResolveFail | read-only | mandatory | Number of packets which caused the Resolve to fail. The fail is due to no vlan information was returned. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.15 | ColumnsfpsCPResourcesResolveError | read-only | mandatory | Number of packets which caused the Resolve to return an error. An error could be caused by a bad packet. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.16 | ColumnsfpsCPResourcesPolicyFail | read-only | mandatory | Number of packets which caused the Policy to fail. The fail is caused because the switch has no information on the vlan(s) returned by Resolve. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.17 | ColumnsfpsCPResourcesPolicyError | read-only | mandatory | Number of packets which caused the Policy to return an error. An error could be caused by a bad packet. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.18 | ColumnsfpsCPResourcesConnectFail | read-only | mandatory | Number of packets that caused the Connect to fail. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.19 | ColumnsfpsCPResourcesConnectFlood | read-only | mandatory | Number of packets that caused the Connect to flood. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.20 | ColumnsfpsCPResourcesConnectError | read-only | mandatory | Number of packets that caused the Connect to return an error. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.21 | ColumnsfpsCPResourcesConfigTime | read-only | mandatory | Number of time ticks since the last configuration change. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.22 | ColumnsfpsCPResourcesNeedFlood | read-only | mandatory | Set to enabled(1)/disabled(0) if the BaseNeedFlood attribute is desired. If disabled, then an attempt to resolve is performed. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.23 | ColumnsfpsCPResourcesNeedResolve | read-only | mandatory | Set to enabled(1)/disabled(0) if the Resoolve attribute is desired. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.24 | ColumnsfpsCPResourcesNeedDiscover | read-only | mandatory | Set to enabled(1)/disabled(0) if the Discover attribute is desired. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.25 | ColumnsfpsCPResourcesDiscoverAll | read-only | mandatory | Set to enabled(1)/disabled(0) if the DiscoverAll attribute is desired. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.26 | ColumnsfpsCPResourcesNeedProxyOut | read-only | mandatory | Set to enabled(1)/disabled(0) if the Proxy Forward attribute is desired. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.27 | ColumnsfpsCPResourcesNeedProxyIn | read-only | mandatory | Set to enabled(1)/disabled(0) if the Proxy Back attribute is desired. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.28 | ColumnsfpsCPResourcesNeedFilter | read-only | mandatory | Set to enabled(1)/disabled(0) if the Filter attribute is desired. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.29 | ColumnsfpsCPResourcesAcceptRate | read-only | mandatory | The number of packets per second that have been sent to this Call Processor to be handled and accepted for processing. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.30 | ColumnsfpsCPResourcesTotalRate | read-only | mandatory | The number of packets per second that have been sent to this Call Processor to be handled. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.34 | ColumnsfpsCPResourcesSingleFlood | read-only | mandatory | Number of packets that were unicast (single) flooded. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.35 | ColumnsfpsCPResourcesNeedValidNet | read-only | mandatory | Number of packets that were unicast (single) flooded. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.36 | ColumnsfpsCPResourcesInvalidNetDrops | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.37 | ColumnsfpsCPResourcesPersistMask | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2 | NodesfpsCPResourcesAPI | |||
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.1 | ScalarsfpsCPResourcesAPIID | read-write | mandatory | Identifier for the call processor. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.2 | ScalarsfpsCPResourcesAPIAdminStatus | read-write | mandatory | Administrative status of the call processor. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.3 | ScalarsfpsCPResourcesAPIAttribute | read-write | mandatory | Call processor attribute/features. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.4 | ScalarsfpsCPResourcesAPIScope | read-write | mandatory | Scope this attribute to switch or port. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.5 | ScalarsfpsCPResourcesAPIPersistance | read-write | mandatory | Parameter to make persistent on switch reset. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.3.2.6 | ScalarsfpsCPResourcesAPIVerb | read-write | mandatory | Action to perform. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9 | TablesfpsServiceCenterFacilityTable | not-accessible | mandatory | This table gives facility semantics to call processing. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1 | RowsfpsServiceCenterFacilityEntry | not-accessible | mandatory | Each entry contains the configuration of the Facility Entry. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.1 | ColumnsfpsServiceCenterFacilityHashLeaf | read-only | mandatory | Server hash, part of instance key. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.2 | ColumnsfpsServiceCenterFacilityMetric | read-only | mandatory | Defines order servers are called low to high. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.3 | ColumnsfpsServiceCenterFacilityName | read-only | mandatory | Server name. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.4 | ColumnsfpsServiceCenterFacilityOperStatus | read-only | mandatory | Operational state of entry. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.5 | ColumnsfpsServiceCenterFacilityAdminStatus | read-write | mandatory | Administrative State of Entry. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.6 | ColumnsfpsServiceCenterFacilityStatusTime | read-only | mandatory | Time Tick of last operStatus change. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.7 | ColumnsfpsServiceCenterFacilityRequests | read-only | mandatory | Requests made to server. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.8 | ColumnsfpsServiceCenterFacilityReply | read-only | mandatory | GOOD replies by server. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1 | TablesfpsCSPControlTable | not-accessible | mandatory | Cabletron Switch Protocol Control statistics |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1 | RowsfpsCSPControlTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.1 | ColumnsfpsCSPControlTableIndex | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.2 | ColumnsfpsCSPControlTableCSPType | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.3 | ColumnsfpsCSPControlTableCSPName | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.4 | ColumnsfpsCSPControlTableAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.5 | ColumnsfpsCSPControlTableSwitchToCallProc | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.6 | ColumnsfpsCSPControlTablePktsProcessed | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.7 | ColumnsfpsCSPControlTablePktRate | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1 | TablesfpsBlockSourceTable | not-accessible | mandatory | The SourceBlocker table lists all nodes (MAC addresses) that have been heard locally on the switch. Only a certain subset (if any) of the nodes in this table a… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1 | RowsfpsBlockSourceEntry | not-accessible | mandatory | Entry in the SourceBlocker table indexed by a counter. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.1 | ColumnsfpsBlockSourceIndex | read-only | mandatory | The index into the table |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.2 | ColumnsfpsBlockSourceMAC | read-only | mandatory | The MAC address of the node. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.3 | ColumnsfpsBlockSourceElapTimeShort | read-only | mandatory | The elapsed time (seconds) in the current short-threshold period. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.4 | ColumnsfpsBlockSourceNumCallsShort | read-only | mandatory | The number of packets seen from the node during the elapsed time for the short-threshold. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.5 | ColumnsfpsBlockSourceElapTimeLong | read-only | mandatory | The elapsed time (seconds) in the current long-threshold period. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.6 | ColumnsfpsBlockSourceNumCallLong | read-only | mandatory | The number of packets seen from the node during the elapsed time for the long-threshold. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.7 | ColumnsfpsBlockSourceBlockFlag | read-only | mandatory | Describes whether the node is blocked or not. There are three possible integer values for this field: 0-notBlocked, 1-Blocked, 2-WouldBeBlocked. The WouldBeBlo… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.8 | ColumnsfpsBlockSourceUnBlockableFlag | read-only | mandatory | Flags a node as either Blockable(0) or Unblockable(1). When a node is unblockable, it will never be blocked regardless of the number of packets it sends. The d… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.9 | ColumnsfpsBlockSourceFilterPresent | read-only | mandatory | Flags whether or not a connection filter is in place for the given node. (This attribute cannot be changed on its own and is therefore used only for diagnostic… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.10 | ColumnsfpsBlockSourceNext | read-only | mandatory | If this node entry (instance) is part of a hash chain, the NEXT leaf will contain the index to the next node entry in the chain. Otherwise, it will contain -1. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.11 | ColumnsfpsBlockSourceBlocksOnlyIndex | read-only | mandatory | Contains the index into the BlockSourceOnly table or the UnblockableOnly table depending on the entry flags. If the 'blocked flag' is set, this value represent… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1 | TablesfpsBlockSourceOnlyTable | not-accessible | mandatory | The format of the BlockSourceOnly Table is exactly the same as the SourceBlocker Table. The only difference is that the entries in this table are only a subset… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1 | RowsfpsBlockSourceOnlyEntry | not-accessible | mandatory | Entry in the BlockSourceOnly table indexed by a counter. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.1 | ColumnsfpsBlockSourceOnlyIndex | read-only | mandatory | The index into the table |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.2 | ColumnsfpsBlockSourceOnlyMAC | read-only | mandatory | The MAC address of the node. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.3 | ColumnsfpsBlockSourceOnlyElapTimeShort | read-only | mandatory | The elapsed time (seconds) in the current short-threshold period. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.4 | ColumnsfpsBlockSourceOnlyNumCallsShort | read-only | mandatory | The number of packets seen from the node during the elapsed time for the short-threshold. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.5 | ColumnsfpsBlockSourceOnlyElapTimeLong | read-only | mandatory | The elapsed time (seconds) in the current long-threshold period. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.6 | ColumnsfpsBlockSourceOnlyNumCallLong | read-only | mandatory | The number of packets seen from the node during the elapsed time for the long-threshold. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.7 | ColumnsfpsBlockSourceOnlyBlockFlag | read-only | mandatory | Describes whether the node is blocked or not. There are three possible integer values for this field: 0-notBlocked, 1-Blocked, 2-WouldBeBlocked. The WouldBeBlo… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.8 | ColumnsfpsBlockSourceOnlyUnBlockableFlag | read-only | mandatory | Flags a node as either Blockable(0) or Unblockable(1). When a node is unblockable, it will never be blocked regardless of the number of packets it sends. The d… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.9 | ColumnsfpsBlockSourceOnlyFilterPresent | read-only | mandatory | Flags whether or not a connection filter is in place for the given node. (This attribute cannot be changed on its own and is therefore used only for diagnostic… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.10 | ColumnsfpsBlockSourceOnlyNext | read-only | mandatory | If this node entry (instance) is part of a hash chain, the NEXT leaf will contain the index to the next node entry in the chain. Otherwise, it will contain -1. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.11 | ColumnsfpsBlockSourceOnlyBlocksOnlyIndex | read-only | mandatory | Contains the index into the BlockSourceOnly table or the UnblockableOnly table depending on the entry flags. If the 'blocked' flag is set, this value represent… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.3.1 | TablesfpsBlockSourcePortTable | not-accessible | mandatory | The SourceBlock API allows for administratively selecting a port and flagging it as 'unblockable'. The BlockSourcePort table shows which ports are set to 'unbl… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1 | RowsfpsBlockSourcePortEntry | not-accessible | mandatory | Entry into the BlockSourcePort Table |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1.1 | ColumnsfpsBlockSourcePortPort | read-only | mandatory | This is the instance part of the table. There will be as many instances as there are logical ports in the device. The attributes represented in subsequent leav… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1.2 | ColumnsfpsBlockSourcePortBlockability | read-only | mandatory | This leaf contains either 0-blockable or 1-unblockable, depending on whether nodes on this port are allowed to be blocked or not. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.4.1 | ScalarsfpsBlockSourceAPIVerb | read-write | mandatory | Other Disable blocked will remain blocked, but no additional nodes will be blocked) Enable ClearAll connection filters, and should only be used as a diagnostic… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.4.2 | ScalarsfpsBlockSourceAPIInputValue | read-write | mandatory | Set the input value to enter |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.4.3 | ScalarsfpsBlockSourceAPIPort | read-write | mandatory | Read/Write leaf used in conjunction with SetPortUnblockable and SetPortBlockable. (values of 1 through numLogicalPorts are valid. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.4.4 | ScalarsfpsBlockSourceAPIMAC | read-write | mandatory | Leaf used to set the MAC address that will be operated on with one of the above verbs. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.4.5 | ScalarsfpsBlockSourceAPIBlockStatus | read-write | mandatory | Status of the blocker object (enabled/disabled.) Additional nodes will be blocked only when this status leaf is in the 'enabled' state. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.4.6 | ScalarsfpsBlockSourceAPIShortThreshold | read-write | mandatory | The number of packets per a SHORTPERIOD that will result in a node being blocked. This can be changed by writing directly to this leaf. The only limit imposed … |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.4.7 | ScalarsfpsBlockSourceAPIShortPeriod | read-write | mandatory | The sample period to use for determining if any given node has exceeded the SHORTTHRESHOLD. See SHORTTHRESHOLD for bounds checking for this value |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.4.8 | ScalarsfpsBlockSourceAPILongThreshold | read-write | mandatory | The number of packets per a LONGPERIOD that will result in a node being blocked. See SHORTTHRESHOLD for bounds checking for this value. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.4.9 | ScalarsfpsBlockSourceAPILongPeriod | read-write | mandatory | The sample period to use for determining if any given node has exceeded the LONGTHRESHOLD. See SHORTTHRESHOLD for bounds checking for this value. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.4.10 | ScalarsfpsBlockSourceAPIReapUserCnxs | read-write | mandatory | The sample period to use for determining if any given node has exceeded the LONGTHRESHOLD. See SHORTTHRESHOLD for bounds checking for this value. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1 | TablesfpsBlockSourceExcludeTable | not-accessible | mandatory | The format of the UnblockableOnly Table is exactly the same as the SourceBlocker Table. The only difference is that the entries in this table are only a subset… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1 | RowsfpsBlockSourceExcludeEntry | not-accessible | mandatory | Entry in the BlockSourceOnly table indexed by a counter. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.1 | ColumnsfpsBlockSourceExcludeIndex | read-only | mandatory | The index into the table |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.2 | ColumnsfpsBlockSourceExcludeMAC | read-only | mandatory | The MAC address of the node. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.3 | ColumnsfpsBlockSourceExcludeElapTimeShort | read-only | mandatory | The elapsed time (seconds) in the current short-threshold period. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.4 | ColumnsfpsBlockSourceExcludeNumCallsShort | read-only | mandatory | The number of packets seen from the node during the elapsed time for the short-threshold |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.5 | ColumnsfpsBlockSourceExcludeElapTimeLong | read-only | mandatory | The elapsed time (seconds) in the current long-threshold period |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.6 | ColumnsfpsBlockSourceExcludeNumCallLong | read-only | mandatory | The number of packets seen from the node during the elapsed time for the long-threshold. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.7 | ColumnsfpsBlockSourceExcludeBlockFlag | read-only | mandatory | Describes whether the node is blocked or not. There are three possible integer values for this field: 0-notBlocked, 1-Blocked, 2-WouldBeBlocked. The WouldBeBlo… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.8 | ColumnsfpsBlockSourceExcludeUnBlockableFlag | read-only | mandatory | Flags a node as either Blockable(0) or Unblockable(1). When a node is unblockable, it will never be blocked regardless of the number of packets it sends. The d… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.9 | ColumnsfpsBlockSourceExcludeFilterPresent | read-only | mandatory | Flags whether or not a connection filter is in place for the given node. (This attribute cannot be changed on its own and is therefore used only for diagnostic… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.10 | ColumnsfpsBlockSourceExcludeNext | read-only | mandatory | If this node entry (instance) is part of a hash chain, the NEXT leaf will contain the index to the next node entry in the chain. Otherwise, it will contain -1 |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.11 | ColumnsfpsBlockSourceExcludeBlockSourceOnlyIndex | read-only | mandatory | Contains the index into the BlockSourceOnly table or the UnblockableOnly table depending on the entry flags. If the 'blocked' flag is set, this value represent… |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.1 | ScalarsfpsBlockSourceStatsNumBlocks | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.2 | ScalarsfpsBlockSourceStatsNumCollisions | read-only | mandatory | The number of hash collisions resulting in a chain of nodes. (diagnostic only.) |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.3 | ScalarsfpsBlockSourceStatsLongestChain | read-only | mandatory | The maximum number of nodes in a linked list chain (including the hash bucket itself) due to hashing collisions. (diagnostic only.) |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.4 | ScalarsfpsBlockSourceStatsNumEntries | read-only | mandatory | The number of entries in the SourceBlocker table. (Each new node that is heard has its own entry. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.5 | ScalarsfpsBlockSourceStatsMaxNumEntries | read-only | mandatory | The maximum number of entries that can fit in the SourceBlocker Table. (This currently mirrors the size of the Directory's NodeTable.) |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.6 | ScalarsfpsBlockSourceStatsSizeOfObj | read-only | mandatory | The size of the SourceBlocker object itself (in bytes.) |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.7 | ScalarsfpsBlockSourceStatsHashModValue | read-only | mandatory | The value that is used for the modulus operation in the hashing algorythm. |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.8 | ScalarsfpsBlockSourceStatsHashSlotsSize | read-only | mandatory | The amount of storage used for the hash buckets (in bytes.) |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.9 | ScalarsfpsBlockSourceStatsTableSize | read-only | mandatory | The amount of storage used for the SourceBlocker Table (in bytes.) |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.10 | ScalarsfpsBlockSourceStatsBlockSourceOnlySize | read-only | mandatory | The amount of storage used for the Blocks-Only index array (in bytes.) |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.11 | ScalarsfpsBlockSourceStatsUnblockableSize | read-only | mandatory | The amount of storage used for the Unblockable-Only index array (in bytes.) |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.12 | ScalarsfpsBlockSourceStatsPortMaskSize | read-only | mandatory | The amount of storage used for the port mask object (in bytes.) |
| 1.3.6.1.4.1.52.4.2.4.2.2.14.6.13 | ScalarsfpsBlockSourceStatsTotalHeapBytes | read-only | mandatory | The total amount of heap memory used for all data storage (above) including the SourceBlocker object itself (in bytes.) |
| 1.3.6.1.4.1.52.4.2.4.2.2.15.1 | ScalarsfpsDHCPServerVLANName | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.15.2 | ScalarsfpsDHCPServerVLANSingleFloodStatus | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.15.3 | ScalarsfpsDHCPServerVLANVersion | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.16.1 | ScalarsfpsATalkAMRVLANControlName | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.16.2 | ScalarsfpsATalkAMRVLANControlVersion | read-only | mandatory |