CTRON-SFPS-CALL-MIB
54 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-SFPS-INCLUDE-MIB | 2 sfpsSap sfpsCallByTuple sfpsCallTableStats sfpsSapAPI |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | -- Counter -- enterprises -- IpAddress Gauge TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1 | TablesfpsSapTable | not-accessible | mandatory | This table contains the registered (active) call processors indexed (indirectly) by address and address type supported. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1 | RowsfpsSapTableEntry | not-accessible | mandatory | Each entry contains information pertaining to an active call processor. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.1 | ColumnsfpsSapTableTag | read-only | mandatory | A type tag used to sort and index the table entries. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.2 | ColumnsfpsSapTableHash | read-only | mandatory | A hash of the sfpsSapTableAddress used to identify the instance. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.3 | ColumnsfpsSapTableHashIndex | read-only | mandatory | A count of the non-unique sfpsSapTableAddress hashes used to identify the instance. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.4 | ColumnsfpsSapTableSourceCP | read-only | mandatory | The name of the call processor initiating the the SAP attempts for this particular SAP load. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.5 | ColumnsfpsSapTableDestCP | read-only | mandatory | The destination call processor that is registered for with this source call processor for the given SAP load. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.6 | ColumnsfpsSapTableSAP | read-only | mandatory | The value of the SAP in 0x format. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.7 | ColumnsfpsSapTableOperStatus | read-only | mandatory | Displays the Current OperStatus of the SAP entry. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.8 | ColumnsfpsSapTableAdminStatus | read-only | mandatory | Displays the Current AdminStatus of the SAP entry. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.9 | ColumnsfpsSapTableStateTime | read-only | mandatory | Total number of SFPSElements stored in NVRAM for persistence. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.10 | ColumnsfpsSapTableDescription | read-only | mandatory | Text description of the entry. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.11 | ColumnsfpsSapTableNumAccepted | read-only | mandatory | Number accepted by the SAP. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.12 | ColumnsfpsSapTableNumDropped | read-only | mandatory | Number dropped by the SAP. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.13 | ColumnsfpsSapTableUnicastSap | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.1.1.14 | ColumnsfpsSapTableNVStatus | read-only | mandatory | Status in NVRAM for persistence. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.1 | ScalarsfpsSapAPIVerb | read-write | mandatory | 1 - getStatus and SAP info are entered, this action will get the current AdminStatus, OperStatus, and NvramStatus. (Must perform a mo_get after setting the abo… |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.2 | ScalarsfpsSapAPISourceCP | read-write | mandatory | The name of the call processor initiating the the SAP attempts for this particular SAP load. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.3 | ScalarsfpsSapAPIDestCP | read-write | mandatory | The destination call processor that is registered for with this source call processor for the given SAP load. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.4 | ScalarsfpsSapAPISAP | read-write | mandatory | Enter in the SAP for the desired SAP Entry. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.5 | ScalarsfpsSapAPINVStatus | read-only | mandatory | Displays the Current Admin Status of this SAP Entry saved in Nvram. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.6 | ScalarsfpsSapAPIAdminStatus | read-only | mandatory | Displays the Current AdminStatus of the SAP Entry. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.7 | ScalarsfpsSapAPIOperStatus | read-only | mandatory | Displays the Current OperStatus of the SAP Entry. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.8 | ScalarsfpsSapAPINvSet | read-only | mandatory | Total number of entries stored in NVRAM for persistence. |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.9 | ScalarsfpsSapAPINVTotal | read-write | mandatory | Total number of entries allocated in NVRAM. The switch will always allocate enough space in NVRAM for the number of elements. That is, NvTotal will always be g… |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.10 | ScalarsfpsSapAPINumAccept | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.11 | ScalarsfpsSapAPINvDiscard | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.2.2.2.12 | ScalarsfpsSapAPIDefaultStatus | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1 | TablesfpsCallByTupleTable | not-accessible | mandatory | This table contains the call tags, and call states indexed (indirectly) by switch tuple (in port, src address, dst address) |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1 | RowsfpsCallByTupleEntry | not-accessible | mandatory | Each entry contains information pertaining to a call tag and its state. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.1 | ColumnsfpsCallByTupleInPort | read-only | mandatory | Port of the switch on which the packet associated with this call tag was seen. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.2 | ColumnsfpsCallByTupleSrcHash | read-only | mandatory | A hash of sfpsCallByTupleBotSrcAddress used to identify the instance. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.3 | ColumnsfpsCallByTupleDstHash | read-only | mandatory | A hash of sfpsCallByTupleTopDstAddress used to identify the instance. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.4 | ColumnsfpsCallByTupleHashIndex | read-only | mandatory | A count of non-unique sfpsCallByTupleSrcHash and sfpsCallByTupleDstHash pairs used to identify the instance. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.5 | ColumnsfpsCallByTupleBotSrcType | read-only | mandatory | The source address type of the lowest known protocol layer. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.6 | ColumnsfpsCallByTupleBotSrcAddress | read-only | mandatory | The source address value of the lowest known protocol layer. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.7 | ColumnsfpsCallByTupleBotDstType | read-only | mandatory | The destination address type of the lowest known protocol layer. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.8 | ColumnsfpsCallByTupleBotDstAddress | read-only | mandatory | The destination address value of the lowest known protocol layer. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.9 | ColumnsfpsCallByTupleTopSrcType | read-only | mandatory | The source address type of the highest learned protocol layer. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.10 | ColumnsfpsCallByTupleTopSrcAddress | read-only | mandatory | The source address value of the highest learned protocol layer. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.11 | ColumnsfpsCallByTupleTopDstType | read-only | mandatory | The destination address type of the highest learned protocol layer. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.12 | ColumnsfpsCallByTupleTopDstAddress | read-only | mandatory | The destination address value of the highest learned protocol layer. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.13 | ColumnsfpsCallByTupleCallProcName | read-only | mandatory | The name of the call processor responsible for all signaling for this packet/call tag. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.14 | ColumnsfpsCallByTupleCallTag | read-only | mandatory | The number used to reference this packet and its associated calls. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.15 | ColumnsfpsCallByTupleCallState | read-only | mandatory | The current state of the packet in the call processor. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.5.1.1.16 | ColumnsfpsCallByTupleTimeRemaining | read-only | mandatory | The number of time ticks remaining before this entry's timer expires and it is removed from the table. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.1 | ScalarsfpsCallTableStatsRam | read-only | mandatory | The number of bytes used by the Call Table. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.2 | ScalarsfpsCallTableStatsSize | read-only | mandatory | The number of entries in the Call Table. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.3 | ScalarsfpsCallTableStatsInUse | read-only | mandatory | The current number of calls in use. A call goes into this table only if it is being blocked (waiting for resolve or sent new user). |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.4 | ScalarsfpsCallTableStatsMax | read-only | mandatory | The maximum number of calls that the switch maintained. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.5 | ScalarsfpsCallTableStatsTotMisses | read-only | mandatory | The number of times that there were no calls available in the Call Table. This would be the number of calls that had to be dropped. |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.7 | ScalarsfpsCallTableStatsMissStart | read-only | mandatory | Time when last miss occurred |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.8 | ScalarsfpsCallTableStatsMissStop | read-only | mandatory | Time when missing stopped |
| 1.3.6.1.4.1.52.4.2.4.2.2.5.1.6.9 | ScalarsfpsCallTableStatsLastMiss | read-write | mandatory | Number of calls dropped in last miss, also write 0 to files |