CTRON-SFPS-CONNECTION-MIB
107 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-SFPS-INCLUDE-MIB | sfpsCNXPacketStats sfpsConnectionAPI sfpsConnectionConfigAPI sfpsConnectionLookupAPI sfpsConnectionQueryAPI sfpsConnectionStats sfpsConnectionTestAPI txt sfpsSwitchConnections |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | -- tcl enterprises -- IpAddress Gauge Counter TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1 | TablesfpsConnectionTable | not-accessible | mandatory | This table contains the connection information for all active connections on the SFPS access ports. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1 | RowsfpsConnectionEntry | not-accessible | mandatory | Each entry specifies the connection information for the active connection for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.1 | ColumnsfpsConnectionDestination | read-only | mandatory | The destination SFPS address for this source/destination connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.2 | ColumnsfpsConnectionSource | read-only | mandatory | The source SFPS address for this source/destination connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.3 | ColumnsfpsConnectionPrimInPort | read-only | mandatory | Identifies the primary inbound SFPS switch port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.4 | ColumnsfpsConnectionPrimOutPort | read-only | mandatory | Identifies the primary outbound SFPS switch port. All switched traffic for this connection will be transmitted on this outbound port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.5 | ColumnsfpsConnectionSecInPort | read-only | mandatory | Identifies the secondaryinbound SFPS switch port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.6 | ColumnsfpsConnectionSecOutPort | read-only | mandatory | Identifies the secondary outbound SFPS switch port. All switched traffic for this connection will be transmitted on this outbound port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.7 | ColumnsfpsConnectionCtrlStatus | read-write | mandatory | The control state of the SFPS connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.8 | ColumnsfpsConnectionAdminStatus | read-write | mandatory | The administrative state of the SFPS connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.9 | ColumnsfpsConnectionAge | read-only | mandatory | Indicates the age of the connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.10 | ColumnsfpsConnectionType | read-only | mandatory | Sets the type of connection. Provisioned connections are setup manually; switched and vlan connections are setup dynammically. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.11 | ColumnsfpsConnectionPkts | read-only | mandatory | Indicates the total number of packets sent on this connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.12 | ColumnsfpsConnectionBytes | read-only | mandatory | Indicates the total number of bytes sent on this connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.13 | ColumnsfpsConnectionCanAge | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.14 | ColumnsfpsConnectionPrimOutPorts | read-only | mandatory | Identifies a list of outbound SFPS switch ports. All switched traffic for this connection will be transmitted on these outbound ports. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.15 | ColumnsfpsConnectionSecOutPorts | read-only | mandatory | Identifies a list of outbound SFPS switch ports. All switched traffic for this connection will be transmitted on these outbound ports. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.1 | ScalarsfpsConnectionLookupAPIVerb | read-write | mandatory | Specifies the action to be initiated as a result of setting this leaf. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.2 | ScalarsfpsConnectionLookupAPIMacAddr | read-write | mandatory | MAC address to be looked up as either the Source or Destination addresses. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.3 | ScalarsfpsConnectionLookupAPIDestAddr | read-only | mandatory | Destination MAC address |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.4 | ScalarsfpsConnectionLookupAPISourceAddr | read-only | mandatory | Source MAC address |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.5 | ScalarsfpsConnectionLookupAPIPrimInPort | read-only | mandatory | Source port number |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.6 | ScalarsfpsConnectionLookupAPIPrimOutPort | read-only | mandatory | Destination port number. If -1, denotes multiple out ports. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.7 | ScalarsfpsConnectionLookupAPISecInPort | read-only | mandatory | Source port number |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.8 | ScalarsfpsConnectionLookupAPISecOutPort | read-only | mandatory | Destination port number. If 01, denotes multiple out ports |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.9 | ScalarsfpsConnectionLookupAPICtrlStatus | read-only | mandatory | Control status |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.10 | ScalarsfpsConnectionLookupAPIAdminStatus | read-only | mandatory | Administrative status |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.11 | ScalarsfpsConnectionLookupAPIAge | read-only | mandatory | Age of connection |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.12 | ScalarsfpsConnectionLookupAPIType | read-only | mandatory | Type of connection |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.13 | ScalarsfpsConnectionLookupAPIPkts | read-only | mandatory | Number of packets switched on this connection |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.14 | ScalarsfpsConnectionLookupAPIBytes | read-only | mandatory | Number of bytes switched on this connection |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.15 | ScalarsfpsConnectionLookupAPICanAge | read-only | mandatory | Boolean to determine if this connection will be aged. True (1) means to age. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.16 | ScalarsfpsConnectionLookupAPIPrimOutPorts | read-only | mandatory | If Primary OutPort is -1, the multiple outports will be displayed in text format |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.2.17 | ScalarsfpsConnectionLookupAPISecOutPorts | read-only | mandatory | If Secondary OutPort is -1, the multiple outports will be displayed in text format |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.1 | ScalarsfpsConnectionConfigAPIVerb | read-write | mandatory | Specifies the verb. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.2 | ScalarsfpsConnectionConfigAPICnxHiMark | read-write | mandatory | Specifies the percentage of the Connection Table needed to be full before beginning aging. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.3 | ScalarsfpsConnectionConfigAPICnxNumToAge | read-write | mandatory | Specifies the number of connections to age at each pass. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.4 | ScalarsfpsConnectionConfigAPIAgePeriod | read-write | mandatory | Specifies the age period. Units in minutes. 0 - No periodic aging N - age every N minutes |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.5 | ScalarsfpsConnectionConfigAPIAgePassInProgress | read-only | mandatory | Specifies whether the age pass is in progress. 0 - not aging now 1 - aging now. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.6 | ScalarsfpsConnectionConfigAPICurCapacity | read-only | mandatory | Specifies the percentage of the Connection Table used. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.7 | ScalarsfpsConnectionConfigAPILastPassTime | read-only | mandatory | Specifies the time that the last age pass occured. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.8 | ScalarsfpsConnectionConfigAPITimeSinceLastPass | read-only | mandatory | Specifies the time since the last age pass. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.9 | ScalarsfpsConnectionConfigAPIAgePassDelta | read-only | mandatory | Specifies the time between the last two age passes. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.10 | ScalarsfpsConnectionConfigAPIAgePassCount | read-only | mandatory | Specifies the number of aging passes that have occured. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.11 | ScalarsfpsConnectionConfigAPIAgeStatsHiMark | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.12 | ScalarsfpsConnectionConfigAPIStatsAgingEnable | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.13 | ScalarsfpsConnectionConfigAPIAgeStatsAgingSupported | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.14 | ScalarsfpsConnectionConfigAPIIdleCnxs | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.3.15 | ScalarsfpsConnectionConfigAPIActiveCnxs | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.1 | ScalarsfpsConnectionStatsMaxCnxs | read-only | mandatory | The maximum number of bi-directional connections allocated for the switch. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.2 | ScalarsfpsConnectionStatsTotalCnxs | read-only | mandatory | The total number of bi-directional connections used in the switch. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.3 | ScalarsfpsConnectionStatsSwitchedCnxs | read-only | mandatory | The number of bi-directional connections used in the switch with type <switched> |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.4 | ScalarsfpsConnectionStatsVlanCnxs | read-only | mandatory | The number of bi-directional connections used in the switch with type <VLAN> |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.5 | ScalarsfpsConnectionStatsFilterCnxs | read-only | mandatory | The number of bi-directional connections used in the switch with type <Filter> |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.6 | ScalarsfpsConnectionStatsSelfProgCnxs | read-only | mandatory | The number of bi-directional connections used in the switch with type <self Programmed Connections> |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.7 | ScalarsfpsConnectionStatsProvsnedCnxs | read-only | mandatory | The number of bi-directional connections used in the switch with type <provisioned> |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.8 | ScalarsfpsConnectionStatsTapCnxs | read-only | mandatory | The number of bi-directional connections used in the switch with type <tap> |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.9 | ScalarsfpsConnectionStatsMcastCnxs | read-only | mandatory | The number of bi-directional connections used in the switch with type <multicast> |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.10 | ScalarsfpsConnectionStatsNetPortFilterCnxs | read-only | mandatory | The number of bi-directional connections used in the switch with type <network port filter connections> |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.11 | ScalarsfpsConnectionStatsNonCriticalVlans | read-only | mandatory | Number of non-critical connections - these will be aged first |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.12 | ScalarsfpsConnectionStatsAddErrors | read-only | mandatory | Number of errors on adding a connnection |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.4.13 | ScalarsfpsConnectionStatsDeleteErrors | read-only | mandatory | Number of errors on deleting a connection |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.1 | ScalarsfpsConnectionQueryAPIVerb | read-write | mandatory | Specifies the action to be initiated as a result of setting this leaf. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.2 | ScalarsfpsConnectionQueryAPIDestAddr | read-write | mandatory | Destination MAC address. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.3 | ScalarsfpsConnectionQueryAPISourceAddr | read-write | mandatory | Source MAC address. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.4 | ScalarsfpsConnectionQueryAPIInPort | read-write | mandatory | Source port number. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.5 | ScalarsfpsConnectionQueryAPIOutPort | read-write | mandatory | Destination port number. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.6 | ScalarsfpsConnectionQueryAPICtrlStatus | read-only | mandatory | Control Status |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.7 | ScalarsfpsConnectionQueryAPIAdminStatus | read-only | mandatory | Administrative Status. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.8 | ScalarsfpsConnectionQueryAPIAge | read-only | mandatory | Age of connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.9 | ScalarsfpsConnectionQueryAPIQueryType | read-write | mandatory | Type of connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.10 | ScalarsfpsConnectionQueryAPIOwner | read-only | mandatory | Specifies whether or not Call control is owned by this agent switch. If the call is owned, then the switch will be responsible for releasing the call. This is … |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.11 | ScalarsfpsConnectionQueryAPIPkts | read-only | mandatory | Number of packets switched on this connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.12 | ScalarsfpsConnectionQueryAPIBytes | read-only | mandatory | Number of bytes switched on this connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.13 | ScalarsfpsConnectionQueryAPICanAge | read-only | mandatory | Determine if this connection will be aged - (1) means to age. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.14 | ScalarsfpsConnectionQueryAPIOutPorts | read-write | mandatory | If OutPorts is 1 - the multiple outports will be displayed in a text format. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.15 | ScalarsfpsConnectionQueryAPIMacAddr | read-write | mandatory | MAC address. |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.16 | ScalarsfpsConnectionQueryAPISecInPort | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.17 | ScalarsfpsConnectionQueryAPISecOutPort | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.5.18 | ScalarsfpsConnectionQueryAPISecOutPorts | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.6.1 | ScalarsfpsConnectionTestAPIVerb | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.6.2 | ScalarsfpsConnectionTestAPIType | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.6.3 | ScalarsfpsConnectionTestAPINumCnxs | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.6.4 | ScalarsfpsConnectionTestAPIMacAddr | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.3.6.5 | ScalarsfpsConnectionTestAPIPort | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.1 | ScalarsfpsAPIVerb | read-write | mandatory | Specifies the action to be initiated as a result of setting this leaf. |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.2 | ScalarsfpsAPIInPort | read-write | mandatory | Specifies the ingress port of the switch. |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.3 | ScalarsfpsAPIInHeaderType | read-write | mandatory | Specfies the type of header being mapped. |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.4 | ScalarsfpsAPIInHeaderLength | read-write | mandatory | Specifies the length of the header value. |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.5 | ScalarsfpsAPIInHeaderValue | read-write | mandatory | Specifies the actual inHeader value for the mapping. |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.6 | ScalarsfpsAPIOutPort | read-write | mandatory | Specifies the egress port of the switch. |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.7 | ScalarsfpsAPIOutHeaderType | read-write | mandatory | Specfies the type of header being mapped. This value defaults to the value given to sfpsAPIInHeaderType. |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.8 | ScalarsfpsAPIOutHeaderLength | read-write | mandatory | Specifies the length of the header value. This value defaults to the value given to sfpsAPIInHeaderLength. |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.9 | ScalarsfpsAPIOutHeaderValue | read-write | mandatory | Specifies the actual outHeader value for the mapping. This value defaults to the value given to sfpsAPIInHeaderValue. |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.10 | ScalarsfpsAPIArgumentDirection | read-write | mandatory | Specifies the direction of the connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.11 | ScalarsfpsAPIArgumentOwner | read-write | mandatory | Specifies whether or not callcontrol is owned by this agent switch. If the call is owned, then the switch will be responsible for releasing the call. THis is u… |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.12 | ScalarsfpsAPIArgumentPriority | read-write | mandatory | Specifies the outbound priority of the connection. |
| 1.3.6.1.4.1.52.4.2.4.2.1.4.13 | ScalarsfpsAPIType | read-write | mandatory | Sets the type of connection that should be setup. |
| 1.3.6.1.4.1.52.4.2.4.2.1.15.1 | ScalarsfpsCNXPacketStatsVer1Tx | read-only | mandatory | Version 1 transmission |
| 1.3.6.1.4.1.52.4.2.4.2.1.15.2 | ScalarsfpsCNXPacketStatsVer2Tx | read-only | mandatory | Version 2 transmission |
| 1.3.6.1.4.1.52.4.2.4.2.1.15.3 | ScalarsfpsCNXPacketStatsVer1Rx | read-only | mandatory | Version 1 receive |
| 1.3.6.1.4.1.52.4.2.4.2.1.15.4 | ScalarsfpsCNXPacketStatsVer2Rx | read-only | mandatory | Version 2 receive |
| 1.3.6.1.4.1.52.4.2.4.2.1.15.5 | ScalarsfpsCNXPacketStatsOpCode1Tx | read-only | mandatory | Operation code 1 transmission |
| 1.3.6.1.4.1.52.4.2.4.2.1.15.6 | ScalarsfpsCNXPacketStatsOpCode2Tx | read-only | mandatory | Operation code 2 tranmission |
| 1.3.6.1.4.1.52.4.2.4.2.1.15.7 | ScalarsfpsCNXPacketStatsOpCode1Rx | read-only | mandatory | Operation code 1 receive |
| 1.3.6.1.4.1.52.4.2.4.2.1.15.8 | ScalarsfpsCNXPacketStatsOpCode2Rx | read-only | mandatory | Operation code 2 receive |
| 1.3.6.1.4.1.52.4.2.4.2.1.15.9 | ScalarsfpsCNXPacketStatsRxErrors | read-only | mandatory | Receive errors |