CTRON-SFPS-MCAST-MIB
66 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-SFPS-INCLUDE-MIB | 2 sfpsMcastCnx sfpsMcastCnxAPI sfpsMcastConfigApi sfpsMcastIPReceiverInfoBase sfpsMcastIPRIBApi sfpsMcastIPRouter sfpsMcastIPSenderInfoBase sfpsMcastIPSIBApi |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | -- enterprises IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.4.2.5.1.1.1 | ScalarsfpsMcastCnxDestination | read-only | mandatory | The multicast destination MAC address. |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.1.2 | ScalarsfpsMcastCnxSource | read-only | mandatory | The source MAC address. |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.1.3 | ScalarsfpsMcastCnxSenderSw | read-only | mandatory | The MAC address of the switch that the sender is on. |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.1.4 | ScalarsfpsMcastCnxInPort | read-only | mandatory | Local upstream port for flow. |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.1.5 | ScalarsfpsMcastCnxOutPorts | read-only | mandatory | Local downstream port(s) for flow. |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.1.6 | ScalarsfpsMcastCnxGroup | read-only | mandatory | Net layer ID of multicast group |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.1.7 | ScalarsfpsMcastCnxTTL | read-only | deprecated | Scope vlaue for this flow |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.1.8 | ScalarsfpsMcastCnxAge | read-only | mandatory | Age of local connection |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.1.9 | ScalarsfpsMcastCnxStatus | read-only | mandatory | Local connection status (bitwise) |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.1.10 | ScalarsfpsMcastCnxNextSw | read-only | mandatory | The MAC address of the next switch. |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.2.1 | ScalarsfpsMcastCnxAPIDestination | read-only | mandatory | Multicast destination MAC |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.2.2 | ScalarsfpsMcastCnxAPISource | read-only | mandatory | Multicast sender MAC |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.2.3 | ScalarsfpsMcastCnxAPISenderSw | read-only | mandatory | Mac of switch where sender is |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.2.4 | ScalarsfpsMcastCnxAPIInPort | read-only | mandatory | Local upstream port for flow |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.2.5 | ScalarsfpsMcastCnxAPIOutPort | read-only | mandatory | Local downstream port(s) for flow |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.2.6 | ScalarsfpsMcastCnxAPIGroup | read-only | mandatory | Net layer ID of multicast group |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.2.7 | ScalarsfpsMcastCnxAPITTL | read-only | deprecated | Scope value for this flow |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.2.8 | ScalarsfpsMcastCnxAPIVerb | read-only | mandatory | Action to take |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.2.9 | ScalarsfpsMcastCnxAPIFilters | read-only | mandatory | Count of local multicast filters |
| 1.3.6.1.4.1.52.4.2.4.2.5.1.2.10 | ScalarsfpsMcastCnxAPINonFilters | read-only | mandatory | Count of local multicast connections |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.1.1 | TablesfpsMcastIPRouterTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.1.1.1 | RowsfpsMcastIPRouterEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.1.1.1.1 | ColumnsfpsMcastIPRouterIfNum | read-only | mandatory | Port where multicast router is attached |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.1.1.1.2 | ColumnsfpsMcastIPRouterVlanId | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.1.1.1.3 | ColumnsfpsMcastIPRouterRouterIP | read-only | mandatory | IP address of attached multicast router |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.1.1.1.4 | ColumnsfpsMcastIPRouterTTL | read-only | deprecated | Scope vlaue for this router |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.1.2 | ScalarsfpsMcastIPRouterAPIVerb | read-write | mandatory | Action to take |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.1.3 | ScalarsfpsMcastIPRouterAPIIFNum | read-write | mandatory | Port where multicast router is attached |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.1.4 | ScalarsfpsMcastIPRouterAPIRouterIP | read-write | mandatory | IP address of attached multicast router |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.1.5 | ScalarsfpsMcastIPRouterAPITTLScope | read-write | deprecated | Scope value for this router |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.1.6 | ScalarsfpsMcastIPRouterAPIVlanId | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.3.1 | TablesfpsMcastIPRIBTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.3.1.1 | RowsfpsMcastIPRIBEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.3.1.1.1 | ColumnsfpsMcastIPRIBGroup | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.3.1.1.2 | ColumnsfpsMcastIPRIBOrigin | read-only | mandatory | Origin |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.3.1.1.3 | ColumnsfpsMcastIPRIBInclusion | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.3.1.1.4 | ColumnsfpsMcastIPRIBRcvPorts | read-only | mandatory | Mask Object string |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.3.1.1.5 | ColumnsfpsMcastIPRIBAge | read-only | mandatory | CF time ticks |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.3.2.1 | ScalarsfpsMcastIPRIBApiGroup | read-only | mandatory | CF IP address IP multicast group address |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.3.2.2 | ScalarsfpsMcastIPRIBApiPort | read-only | mandatory | Port number, -1 means all ports |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.3.2.3 | ScalarsfpsMcastIPRIBApiVerb | read-only | mandatory | Action to take |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.4.1 | TablesfpsMcastIPSIBTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.4.1.1 | RowsfpsMcastIPSIBEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.4.1.1.1 | ColumnsfpsMcastIPSIBGroup | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.4.1.1.2 | ColumnsfpsMcastIPSIBSender | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.4.1.1.3 | ColumnsfpsMcastIPSIBInclusion | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.4.1.1.4 | ColumnsfpsMcastIPSIBAge | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.4.2.1 | ScalarsfpsMcastIPSibApiGroup | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.4.2.2 | ScalarsfpsMcastIPSibApiSender | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.2.4.2.3 | ScalarsfpsMcastIPSibApiVerb | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.1 | ScalarsfpsMcastConfigApiSenderTableSize | read-only | mandatory | This is the number of entries that are allocated in the multicast connection table at startup. Changing the value will not take effect until blade is reset. Va… |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.2 | ScalarsfpsMcastConfigApiMaxNonFilters | read-only | mandatory | This number is currently not used. Its future purpose may be to control the number of multi-outport connections in use. Values can be set between 0 and 2048. |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.3 | ScalarsfpsMcastConfigApiRDRetryBuffs | read-only | mandatory | This number determines the number of packet objects that will be allocated by the reliable control packet transport agent. The packet object does not allocate … |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.4 | ScalarsfpsMcastConfigApiRDPktBuffs | read-only | mandatory | This number determines the number of packet buffers that will be allocated by the reliable control packet transport agent. Each increment of this oid allocates… |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.5 | ScalarsfpsMcastConfigApiPendingMaps | read-only | mandatory | This is the number of delayed connection mappings that will be maintained while waiting for topology changes to be propagated or while waiting for interswitch … |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.6 | ScalarsfpsMcastConfigApiSndrAgeOut | read-only | mandatory | This is the interval in seconds that the age timer runs. It is used to determine if a sender is still sending. After one age out interval, the sender is placed… |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.7 | ScalarsfpsMcastConfigApiRefreshInterval | read-only | mandatory | This is the interval at which sender announcements will be transmitted by the switch that the sender is locally attached. All sender refreshes will occur withi… |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.8 | ScalarsfpsMcastConfigApiSndersPerAncmt | read-only | mandatory | This is the number of sender announcements that will be made before the thread is released. Value will not take effect until blade is reset. |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.9 | ScalarsfpsMcastConfigApiDebugLog | read-only | mandatory | This value enables or disables extensive information logging in IGMP and MCAST generics. It is used in conjunction with the EventLogClient log flags. This valu… |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.10 | ScalarsfpsMcastConfigApiStaticTblSize | read-only | mandatory | This is the number of static entries that can be made to the sender database (multicast connection table). Typically there would be no entries in this table. V… |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.11 | ScalarsfpsMcastConfigApiMcribSize | read-only | mandatory | This is the number of static entries that can be made to the receiver database. Typically there would be very few entries in this table. Value will not take ef… |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.12 | ScalarsfpsMcastConfigApiMcastMode | read-only | mandatory | Multicast operates in three vlan checking modes. Mode 1 - Do no vlan checking. The sender and receivers do not have to be on the same vlan. Multicast connectio… |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.13 | ScalarsfpsMcastConfigApiRemapDelay | read-only | mandatory | When attempting to obtain a path from receiver to sender, a wait is sometimes incurred when pending on a switch resolve response. Additionally, when topology e… |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.14 | ScalarsfpsMcastConfigApiQHighLimit | read-only | mandatory | The default for the High Query Rate is 100 |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.15 | ScalarsfpsMcastConfigApiQLowLimit | read-only | mandatory | The default for the low query rate is 20 |
| 1.3.6.1.4.1.52.4.2.4.2.5.4.1.16 | ScalarsfpsMcastConfigApiDynamicQuery | read-only | mandatory | The default for the dynamic query is 1 (enabled) |