CTRON-SFPS-PORT-MIB
74 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-SFPS-INCLUDE-MIB | 1 sfpsPortConfig sfpsPortAttributeAPI sfpsPortAttributeTable sfpsPortStats |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | -- tcl enterprises Counter Gauge TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1 | TablesfpsInPortConfigTable | not-accessible | mandatory | This table contains the configuration information of each configured inbound SFPS switch port. If SFPS is not configured on a port, than an entry will not exis… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1 | RowsfpsInPortConfigEntry | not-accessible | mandatory | Each entry specifies the SFPS configuration for the SFPS inbound switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.1 | ColumnsfpsInPortConfigPort | read-only | mandatory | The primary index to the SFPS in port table. This identifies the inbound SFPS switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.2 | ColumnsfpsInPortConfigAdminStatus | read-write | mandatory | Sets the administrative state of the SFPS inbound switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.3 | ColumnsfpsInPortConfigOperStatus | read-only | mandatory | Indicates the current operating condition of the SFPS on the inbound switch port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.4 | ColumnsfpsInPortConfigOperTime | read-only | mandatory | Indicates the elapsed time, in hundredths of a second, that sfpsInPortOperStatus has been in its current operational state on the SFPS inbound switch port for … |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.5 | ColumnsfpsInPortConfigType | read-write | mandatory | Sets the type of port access attribute for the inbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform statis… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.6 | ColumnsfpsInPortConfigReservedBW | read-write | mandatory | Sets the amount of Bandwidth that is reserved for the inbound SFPS port for which this entry exists. This bandwidth is set aside for this port and may be given… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.7 | ColumnsfpsInPortConfigAllocBW | read-only | mandatory | Sets the amount of Bandwidth that is allocated for the inbound SFPS port for which this entry exists. This bandwidth may be less than the reserved bandwidth. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.8 | ColumnsfpsInPortConfigQoS | read-write | mandatory | Sets the desired QoS service class for the inbound SFPS port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.9 | ColumnsfpsInPortConfigQSize | read-only | mandatory | Indicates the maximum inbound queue size for this port. Size is indicated in packets (packet descriptors). |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.10 | ColumnsfpsInPortConfigQLen | read-only | mandatory | Indicates the actual inbound queue size for this port. Size is indicated in packets (packet descriptors). This is a transient value that reflects the current d… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.11 | ColumnsfpsInPortConfigSwitchId | read-only | mandatory | This entry is the id of the port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.12 | ColumnsfpsInPortConfigMediaType | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.13 | ColumnsfpsInPortConfigFrontPanelPort | read-only | mandatory | This represents the front panel physical port number |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.14 | ColumnsfpsInPortConfigLinkStatus | read-only | mandatory | The link status of this port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.15 | ColumnsfpsInPortConfigLinkStateAge | read-only | mandatory | Number of time ticks that link has been in this state. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.16 | ColumnsfpsInPortConfigRouterPort | read-only | mandatory | Specifies whether this port is a router port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.17 | ColumnsfpsInPortConfigSlotNumber | read-only | mandatory | Slot number in the chassis. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.18 | ColumnsfpsInPortConfigMib2PortId | read-only | mandatory | Mib2 Port id |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.19 | ColumnsfpsInPortConfigTopoAgent | read-only | mandatory | Topology Agent |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.22 | ColumnsfpsInPortConfigLayer3Learning | read-only | mandatory | Topology Agent |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2 | TablesfpsOutPortConfigTable | not-accessible | mandatory | This table contains the configuration information of each configured outbound SFPS switch port. If SFPS is not configured on a port, than an entry will not exi… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1 | RowsfpsOutPortConfigEntry | not-accessible | mandatory | Each entry specifies the SFPS configuration for the SFPS outbound switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.1 | ColumnsfpsOutPortConfigPort | read-only | mandatory | The primary index to the SFPS in port table. This identifies the outbound SFPS switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.2 | ColumnsfpsOutPortConfigAdminStatus | read-write | mandatory | Sets the administrative state of the SFPS outbound switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.3 | ColumnsfpsOutPortConfigOperStatus | read-only | mandatory | Indicates the current operating condition of the SFPS on the outbound switch port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.4 | ColumnsfpsOutPortConfigOperTime | read-only | mandatory | Indicates the elapsed time, in hundredths of a second, that sfpsOutPortOperStatus has been in its current operational state on the SFPS outbound switch port fo… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.5 | ColumnsfpsOutPortConfigType | read-write | mandatory | Sets the type of port access attribute for the outbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform stati… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.6 | ColumnsfpsOutPortConfigReservedBW | read-write | mandatory | Sets the amount of Bandwidth that is reserved for the outbound SFPS port for which this entry exists. This bandwidth is set aside for this port and may be give… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.7 | ColumnsfpsOutPortConfigAllocBW | read-only | mandatory | Sets the amount of Bandwidth that is allocated for the outbound SFPS port for which this entry exists. This bandwidth may be less than the reserved bandwidth. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.8 | ColumnsfpsOutPortConfigQoS | read-write | mandatory | Sets the desired QoS service class for the outbound SFPS port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.9 | ColumnsfpsOutPortConfigQSize | read-only | mandatory | Indicates the maximum outbound queue size for this port. Size is indicated in packets (packet descriptors). |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.10 | ColumnsfpsOutPortConfigQLen | read-only | mandatory | Indicates the actual outbound queue size for this port. Size is indicated in packets (packet descriptors). This is a transient value that reflects the current … |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.11 | ColumnsfpsOutPortConfigSwitchId | read-only | mandatory | This entry is id of the port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.12 | ColumnsfpsOutPortConfigMediaType | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.13 | ColumnsfpsOutPortConfigFrontPanelPort | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.14 | ColumnsfpsOutPortConfigLinkStatus | read-only | mandatory | The link status of this port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.15 | ColumnsfpsOutPortConfigLinkStateAge | read-only | mandatory | Number of time ticks that link has been in this state. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.16 | ColumnsfpsOutPortConfigRouterPort | read-only | mandatory | Specifies whether this port is a router port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.17 | ColumnsfpsOutPortConfigSlotNumber | read-only | mandatory | Slot number in the chassis. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.18 | ColumnsfpsOutPortConfigMib2PortId | read-only | mandatory | Mib2 Port id |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.1 | ScalarsfpsPortAttributePort | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.2 | ScalarsfpsPortAttributeAttributes | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.3 | ScalarsfpsPortAttributeLearnSelfArp | read-only | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.1 | ScalarsfpsPortAttributeAPIVerb | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.2 | ScalarsfpsPortAttributeAPIPort | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.3 | ScalarsfpsPortAttributeAPIAttribute | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1 | TablesfpsInPortStatsTable | not-accessible | mandatory | This table contains the packet and byte counters for each inbound SFPS switch port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1 | RowsfpsInPortStatsEntry | not-accessible | mandatory | Specifies the SFPS packet and byte counters for the inbound SFPS switch port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.1 | ColumnsfpsInPortStatsPort | read-only | mandatory | The primary index to the SFPS port table. This identifies the SFPS inbound switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.2 | ColumnsfpsInPortStatsAdminStatus | read-write | mandatory | Sets the administrative state of the SFPS packet and byte counters on the inbound SFPS switch port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.3 | ColumnsfpsInPortStatsReset | read-write | mandatory | Resets the SFPS packet and byte counters on the inbound SFPS switch port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.4 | ColumnsfpsInPortStatsOperTime | read-only | mandatory | Indicates the amount of time (# of time ticks) that the port-specific SFPS packet and byte counters have been active on the inbound SFPS switch port for which … |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.5 | ColumnsfpsInPortStatsPkts | read-only | mandatory | Indicates the total number of SFPS packets that have been received, during sfpsInPortStatsOpertime, on the inbound SFPS switch port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.6 | ColumnsfpsInPortStatsDiscardPkts | read-only | mandatory | Indicates the total number of SFPS packets that have been discarded (dropped), during sfpsInPortStatsOpertime, on the inbound SFPS switch port for which this e… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.7 | ColumnsfpsInPortStatsBytes | read-only | mandatory | Indicates the total number of SFPS bytes that have been received, during sfpsInPortStatsOperTime, on the inbound SFPS switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.8 | ColumnsfpsInPortStatsDiscardBytes | read-only | mandatory | Indicates the total number of bytes in the SFPS packets that have been discarded (dropped), during sfpsInPortStatsOperTime, on the inbound SFPS switch port for… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.9 | ColumnsfpsInPortStatsQOverflows | read-only | mandatory | Indicates the total number of queue overflow conditions have been experienced for the inbound SFPS switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.10 | ColumnsfpsInPortStatsLinkUps | read-only | mandatory | The number of link ups that this port has seen. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.11 | ColumnsfpsInPortStatsLinkDowns | read-only | mandatory | The number of link downs that this port has seen. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2 | TablesfpsOutPortStatsTable | not-accessible | mandatory | This table contains the packet and byte counters for each outbound SFPS switch port. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1 | RowsfpsOutPortStatsEntry | not-accessible | mandatory | Specifies the SFPS packet and byte counters for the outbound SFPS switch port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.1 | ColumnsfpsOutPortStatsPort | read-only | mandatory | The primary index to the SFPS port table. This identifies the SFPS outbound switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.2 | ColumnsfpsOutPortStatsAdminStatus | read-write | mandatory | Sets the administrative state of the SFPS packet and byte counters on the outbound SFPS switch port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.3 | ColumnsfpsOutPortStatsReset | read-write | mandatory | Resets the SFPS packet and byte counters on the outbound SFPS switch port for which this entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.4 | ColumnsfpsOutPortStatsOperTime | read-only | mandatory | Indicates the amount of time (# of time ticks) that the port-specific SFPS packet and byte counters have been active on the outbound SFPS switch port for which… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.5 | ColumnsfpsOutPortStatsPkts | read-only | mandatory | Indicates the total number of SFPS packets that have been received, during sfpsOutPortStatsOpertime, on the outbound SFPS switch port for which this entry exis… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.6 | ColumnsfpsOutPortStatsDiscardPkts | read-only | mandatory | Indicates the total number of SFPS packets that have been discarded (dropped), during sfpsOutPortStatsOpertime, on the outbound SFPS switch port for which this… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.7 | ColumnsfpsOutPortStatsBytes | read-only | mandatory | Indicates the total number of SFPS bytes that have been received, during sfpsOutPortStatsOperTime, on the outbound SFPS switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.8 | ColumnsfpsOutPortStatsDiscardBytes | read-only | mandatory | Indicates the total number of bytes in the SFPS packets that have been discarded (dropped), during sfpsOutPortStatsOperTime, on the outbound SFPS switch port f… |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.9 | ColumnsfpsOutPortStatsQOverflows | read-only | mandatory | Indicates the total number of queue overflow conditions have been experienced for the outbound SFPS switch port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.10 | ColumnsfpsOutPortStatsLinkUps | read-only | mandatory | The number of link ups that this port has seen. |
| 1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.11 | ColumnsfpsOutPortStatsLinkDowns | read-only | mandatory | The number of link downs that this port has seen. |