MIB Viewer

CTRON-SSR-HARDWARE-MIB

56 objects
This module defines a schema to access SSR hardware configuration.
Imported Objects
CTRON-SSR-SMI-MIBssrMibs
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter64 MODULE-IDENTITY OBJECT-TYPE TimeTicks
SNMPv2-TCTEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.52.2501.1.1NodesysHwGroup
1.3.6.1.4.1.52.2501.1.1.1ScalarsysHwNumSlotsread-onlycurrentThe number of slots present in the Shelf/Chassis.
1.3.6.1.4.1.52.2501.1.1.2TablesysHwModuleTablenot-accessiblecurrentA list of module entries.
1.3.6.1.4.1.52.2501.1.1.2.1RowsysHwModuleEntrynot-accessiblecurrentAn entry containing management information applicable to a particular module.
1.3.6.1.4.1.52.2501.1.1.2.1.1ColumnsysHwModuleSlotNumberread-onlycurrentThe physical slot number of the module in the Shelf/Chassis.
1.3.6.1.4.1.52.2501.1.1.2.1.2ColumnsysHwModuleTyperead-onlycurrentThe physical module type.
1.3.6.1.4.1.52.2501.1.1.2.1.3ColumnsysHwModuleDescread-onlycurrentThe description of the module with it's version number etc. For the Control Module it should have the software version, the amount of dynamic RAM, flash RAM.
1.3.6.1.4.1.52.2501.1.1.2.1.4ColumnsysHwModuleNumPortsread-onlycurrentThe number of physical ports on this Card/Module.
1.3.6.1.4.1.52.2501.1.1.2.1.5ColumnsysHwModuleVersionread-onlycurrentThe alpha-numeric version string for this Card/Module.
1.3.6.1.4.1.52.2501.1.1.2.1.6ColumnsysHwModuleMemoryread-onlycurrentSystem Memory size available on the Module. Reports -1 if no memory exists on this module, such as power supplies.
1.3.6.1.4.1.52.2501.1.1.2.1.8ColumnsysHwModuleServiceread-onlycurrentThe Cabletron service identifier string for this Card/Module.The board serial number is appended to the string too.
1.3.6.1.4.1.52.2501.1.1.2.1.9ColumnsysHwModuleStatusread-onlycurrentThe current status of this module, online or offline.
1.3.6.1.4.1.52.2501.1.1.3TablesysHwPortTablenot-accessiblecurrentA list of module entries.
1.3.6.1.4.1.52.2501.1.1.3.1RowsysHwPortEntrynot-accessiblecurrentAn entry containing management information applicable to a particular module.
1.3.6.1.4.1.52.2501.1.1.3.1.1ColumnsysHwPortSlotNumberread-onlycurrentThe physical slot number of the module in the Chassis.
1.3.6.1.4.1.52.2501.1.1.3.1.2ColumnsysHwPortNumberread-onlycurrentThe port number of the physical port in the Card/Module.
1.3.6.1.4.1.52.2501.1.1.3.1.3ColumnsysHwPortTyperead-onlycurrentThe physical port type.
1.3.6.1.4.1.52.2501.1.1.3.1.4ColumnsysHwPortConnectorTyperead-onlycurrentThe physical port connector type.
1.3.6.1.4.1.52.2501.1.1.3.1.5ColumnsysHwPortIfIndexread-onlycurrentThe value of ifIndex used to access this port in the Interface MIB.
1.3.6.1.4.1.52.2501.1.1.4ScalarsysHwPowerSupplyread-onlycurrentThe number and status of power supplies powering the Shelf/Chassis.
1.3.6.1.4.1.52.2501.1.1.5ScalarsysHwFanread-onlycurrentThe current state of the fans located inside the Shelf/Chassis.
1.3.6.1.4.1.52.2501.1.1.6ScalarsysHwTemperatureread-onlycurrentThe current temperature status of the Shelf/Chassis.
1.3.6.1.4.1.52.2501.1.1.7ScalarsysHwChassisIdread-onlycurrentOperator defined serial number for this particular chassis/shelf.
1.3.6.1.4.1.52.2501.1.1.10ScalarsysHwTotalInOctetsread-onlydeprecatedThe total number of octets into the switch.
1.3.6.1.4.1.52.2501.1.1.11ScalarsysHwTotalOutOctetsread-onlydeprecatedThe total number of octets out of the switch.
1.3.6.1.4.1.52.2501.1.1.12ScalarsysHwTotalInFramesread-onlydeprecatedThe total number of frames into the switch.
1.3.6.1.4.1.52.2501.1.1.13ScalarsysHwTotalOutFramesread-onlydeprecatedThe total number of frames out of the switch.
1.3.6.1.4.1.52.2501.1.1.14ScalarsysHwTotalL2SwitchedFramesread-onlydeprecatedThe current number of frames switched at Layer 2 (transport).
1.3.6.1.4.1.52.2501.1.1.15ScalarsysHwTotalL3SwitchedFramesread-onlydeprecatedThe current number of frames switched at IETF Layers 3 (transport) and 4 (application).
1.3.6.1.4.1.52.2501.1.1.19ScalarsysHwSwitchingFabricread-onlycurrentStatus of Switching Fabric in shelf/chassis.
1.3.6.1.4.1.52.2501.1.1.20ScalarsysHwControlModuleLEDread-onlycurrentStatus of the shelf/chassis Active Control Module's four LED displays.
1.3.6.1.4.1.52.2501.1.1.21ScalarsysHwControlModuleBackupStateread-onlycurrentStatus of the the backup Control Module as interpreted from the active control module. CLI: system show hardware will present the following data: Redundant CPU…
1.3.6.1.4.1.52.2501.1.1.22ScalarsysHwLastHotSwapEventread-onlycurrentThe value of sysUpTime when the last hotswap of a physical module event occured.
1.3.6.1.4.1.52.2501.1.200IdentityhardwareMIBThis module defines a schema to access SSR hardware configuration.
1.3.6.1.4.1.52.2501.1.200.2NodehwConformance
1.3.6.1.4.1.52.2501.1.200.2.1NodehwCompliances
1.3.6.1.4.1.52.2501.1.200.2.2NodehwGroups
1.3.6.1.4.1.52.2501.1.200.2.2.1GrouphwConfGroupV10deprecatedA set of managed objects that make up version 1.0 of the SSR Hardware mib.
1.3.6.1.4.1.52.2501.1.200.2.2.1.1CompliancehwComplianceV10deprecatedThe compliance statement for the SSR-HARDWARE-MIB.
1.3.6.1.4.1.52.2501.1.200.2.2.2GrouphwConfGroupV11deprecatedA set of managed objects that make up version 1.1 of the SSR Hardware mib.
1.3.6.1.4.1.52.2501.1.200.2.2.2.2CompliancehwComplianceV11deprecatedThe compliance statement for the SSR-HARDWARE-MIB.
1.3.6.1.4.1.52.2501.1.200.2.2.2.3CompliancehwComplianceV12deprecatedThe compliance statement for the SSR-HARDWARE-MIB.
1.3.6.1.4.1.52.2501.1.200.2.2.2.4CompliancehwComplianceV30currentThe compliance statement for the SSR-HARDWARE-MIB.
1.3.6.1.4.1.52.2501.1.200.2.2.3GrouphwConfGroupV12deprecatedA set of managed objects that make up version 1.2 of the SSR Hardware mib.
1.3.6.1.4.1.52.2501.1.200.2.2.4GrouphwConfGroupV30currentA set of managed objects that make up version 3.0 of the SSR Hardware mib.
Type Definitions
NameSyntaxStatusDescription
PowerSupplyBitsINTEGER (0..255)current
SSRBackupCMStateINTEGER { unknown(1), inactive(2), standby(3), notInstalled(4), active(5) }currentA enumeration that represents the state of the backup control module. A backup control module prom will boot the system firmware to an intermediate state and begins sending hello messages to the main cpu and assume the …
SSRCmLedStateINTEGER (0..15)current
SSRInterfaceIndexINTEGER (0..65535)currentA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub- layer must r…
SSRmemorySizeINTEGER (-1..2147483647)currentAn integer that represents the size of memory in Megabytes. -1 represents not-available or not-applicable value.
SSRModuleStatusINTEGER { online(1), offline(2) }currentCurrent state of module. online indicates the normal state. Offline indicates a powered off or failed module. Modules may be powered off prior to hot swap.
SSRModuleTypeINTEGER { controlModule(1), ether100TX(2), ether100FX(3), gigabitSX(4), gigabitLX(5), serial4port(6), hssi(7), unknown(8), gigabitLLX(9), none(10), controlModule2(11), gigabitLLX2P(12), serial2port(13), cmts1x4port(15), fddi2port(16), controlModule3(17), serial4portCE(20), ether100TX16port(21), gigabitTX(22), atm155(24), sonet4PortOc3(25), sonet2PortOc12(26), gigabitFX4P(27), gigabitFX4PGBIC(28), gigabitFX2PGBIC(29), gigabit6K2PBP(30), rbGigabit8PGBIC(503), rbGigabit4PGBIC(504), rbEther100TX24P(505), rbEther100TC32P(506), rbControlModule(507) }currentA unique value, greater than zero, for each module type supported by the SSR series of products.
SSRPortConnectorTypeINTEGER { empty(0), db9m(1), db9f(2), db15m(3), db15f(4), db25m(5), db25f(6), rj11(7), rj45(8), aui(9), ftypef(10), fiberScMM(11), v35(12), eia530(13), rs44x(14), x21(15), hssi(16), unknown(17), fiberScSM(18), fiberMTRjMM(19), fiberMTRjSM(20), bncf(21), bncm(22), rj21(23), fiberScSMLH(24) }currentA unique value, greater than zero, for each physical port type supported by the SSR series of products
SSRPortTypeINTEGER { etherFast(1), gigEther(2), hssi(3), serial(4), unknown(5), sonet(6), ds1(7), ds3(8), cmt(9), e1(10), e3(11), fddi(12) }currentA unique value, greater than zero, for each physical port type supported by the SSR series of products.
SSRserviceTypeOCTET STRING (SIZE (0..7))currentA string that is unique to a module in production. This string is used by Cabletron Service and Manufacturing as to identify shipped inventory.
SSRSwitchingFabricInfoINTEGER (0..63)current
MIB Viewer