CTRON-TRANSLATION-MIB
101 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | MacAddress |
| CTRON-MIB-NAMES | ctTranslation |
| RFC-1212 | OBJECT-TYPE |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.3.4.1 | NodectTransFddiAtm | |||
| 1.3.6.1.4.1.52.4.1.3.4.1.1 | ScalarctTransFddiAtmMtu | read-write | mandatory | When written with a (1), allows SNAP frames up to 4500 bytes in length to be received from the FNB and processed by the ATM SAR component. When this object is … |
| 1.3.6.1.4.1.52.4.1.3.4.1.2 | ScalarctTransFddiAtmIPFrag | read-write | mandatory | When written with a (1), will fragment IP frames from FDDI to Ethernet before the frame is processed by the ATM SAR component. This object must be ignored when… |
| 1.3.6.1.4.1.52.4.1.3.4.2 | NodectTransFddiEthernet | |||
| 1.3.6.1.4.1.52.4.1.3.4.2.1 | ScalarctTransFddiEthernetIPFrag | read-write | mandatory | Enables or disables IP fragmentation from FDDI to any/all Ethernet interfaces. |
| 1.3.6.1.4.1.52.4.1.3.4.2.2 | ScalarctTransFddiSnapEthernetType | read-write | mandatory | The desired frame type to be translated from FDDI to Ethernet. If set to ethernetII(1) all non-IPX frames will be translated to ethernetII. If set to ethernetS… |
| 1.3.6.1.4.1.52.4.1.3.4.2.3 | ScalarctTransFddiEthernetAuto | read-write | mandatory | Enables or disables the 'Auto-Learn' Translation feature of FDDI to Ethernet frames for the objects below. If enabled, the device will automatically learn the … |
| 1.3.6.1.4.1.52.4.1.3.4.2.4 | ScalarctTransFddiEthernetSnapIPX | read-write | mandatory | The desired translation of IPX FDDI SNAP frames to Ethernet. |
| 1.3.6.1.4.1.52.4.1.3.4.2.5 | ScalarctTransFddiEthernet802dot2IPX | read-write | mandatory | The desired translation of IPX FDDI 802.2 frames to Ethernet. |
| 1.3.6.1.4.1.52.4.1.3.4.2.6 | ScalarctTransFddiEthernetMACIPX | read-write | mandatory | The desired translation of IPX FDDI MAC frames to Ethernet. |
| 1.3.6.1.4.1.52.4.1.3.4.3 | NodectTransEthernetFddi | |||
| 1.3.6.1.4.1.52.4.1.3.4.3.1 | ScalarctTransEthernetFddiRAW | read-write | mandatory | The desired translation of Ethernet802.3 'RAW' frames to FDDI. This is a device level object meaning Ethernet 'RAW' frames to any/all FDDI interfaces. |
| 1.3.6.1.4.1.52.4.1.3.4.3.2 | ScalarctTransEthernetFddiPadVerify | read-write | mandatory | Selects 802.3 length verfication for Ethernet FDDI frame translation. If set to Enabled(1), the device consults the 802.3 length field to determine the amount … |
| 1.3.6.1.4.1.52.4.1.3.4.4 | NodectTransRifDb | |||
| 1.3.6.1.4.1.52.4.1.3.4.4.1 | TablectTransRifDbTable | not-accessible | mandatory | A table containing entries of RIF Database. |
| 1.3.6.1.4.1.52.4.1.3.4.4.1.1 | RowctTransRifDbEntry | not-accessible | mandatory | This entry for ctTransRifDbTable. |
| 1.3.6.1.4.1.52.4.1.3.4.4.1.1.1 | ColumnctTransRifDbMacAddr | read-only | mandatory | The Mac address of a source station in Cabletron cannonical format. |
| 1.3.6.1.4.1.52.4.1.3.4.4.1.1.2 | ColumnctTransRifDbSrcPort | read-only | mandatory | The index of the MIB-II interface that hardware address is learned from. |
| 1.3.6.1.4.1.52.4.1.3.4.4.1.1.3 | ColumnctTransRifDbLength | read-only | mandatory | This object returns the number of bytes of routing information associated with this entry. |
| 1.3.6.1.4.1.52.4.1.3.4.4.1.1.4 | ColumnctTransRifDbRIF | read-only | mandatory | This returns the routing information associated with an entry. |
| 1.3.6.1.4.1.52.4.1.3.4.4.2 | TablectTransRifDbCtrlTable | not-accessible | mandatory | A table containing entries of objects to control RIF database. |
| 1.3.6.1.4.1.52.4.1.3.4.4.2.1 | RowctTransRifDbCtrlEntry | not-accessible | mandatory | This entry for ctTransRifDbCtrlTable. |
| 1.3.6.1.4.1.52.4.1.3.4.4.2.1.1 | ColumnctTransRifDbCtrlPort | read-only | mandatory | The MIB-II interface number of the port for which this entry is administering control over the RIF cache. |
| 1.3.6.1.4.1.52.4.1.3.4.4.2.1.2 | ColumnctTransRifDbWeightState | read-write | mandatory | Indicates the type of RIF to be retained in the RIF database. shortestPath (2) is the RIF with the least number of hops. The existing RIF will be replaced if t… |
| 1.3.6.1.4.1.52.4.1.3.4.4.2.1.3 | ColumnctTransRifDbCtrlType | read-write | mandatory | Type of RIF to cache. When the explorer option (1) is selected the existing RIF may be replaced only if the received frame is an explorer. When the 'all' optio… |
| 1.3.6.1.4.1.52.4.1.3.4.4.2.1.4 | ColumnctTransRifDbAgingTimer | read-write | mandatory | The timeout period in seconds for aging out dynamically learned RI Fs. The default for this object is product specific. |
| 1.3.6.1.4.1.52.4.1.3.4.5 | NodectTransBcastX | |||
| 1.3.6.1.4.1.52.4.1.3.4.5.1 | TablectTransBcastXTable | not-accessible | mandatory | A list describing the state of the broadcast conversion for each interface on this device. The user will specify two broadcast addresses (per interface), one f… |
| 1.3.6.1.4.1.52.4.1.3.4.5.1.1 | RowctTransBcastXEntry | not-accessible | mandatory | A list of objects pertaining to the state of broadcast conversion for each interface. |
| 1.3.6.1.4.1.52.4.1.3.4.5.1.1.1 | ColumnctTransBcastXPort | read-only | mandatory | The MIB-II interface number of the port for which this entry is administering broadcast conversion translation. |
| 1.3.6.1.4.1.52.4.1.3.4.5.1.1.2 | ColumnctTransBcastXMode | read-write | mandatory | This object indicates whether the ctTransBcastXMedia and ctTransBcastXCanonical objects pair are valid for this interface. |
| 1.3.6.1.4.1.52.4.1.3.4.5.1.1.3 | ColumnctTransBcastXMedia | read-write | mandatory | This object is the media specific broadcast address that this interface will allow translation to/from. This conversion only acts upon the DA of the MAC header… |
| 1.3.6.1.4.1.52.4.1.3.4.5.1.1.4 | ColumnctTransBcastXCanonical | read-write | mandatory | This object is the cannonical broadcast address that this interface will allow translation to/from. This conversion only acts upon the DA of the MAC header whe… |
| 1.3.6.1.4.1.52.4.1.3.4.6 | NodectTransIbmLlc | |||
| 1.3.6.1.4.1.52.4.1.3.4.6.1 | TablectTransIbmLlcTable | not-accessible | mandatory | A list describing the state of the IBM LLC translation for each interface on this device. |
| 1.3.6.1.4.1.52.4.1.3.4.6.1.1 | RowctTransIbmLlcEntry | not-accessible | mandatory | A list of objects pertaining to the state of IBM LLC translation for each interface. |
| 1.3.6.1.4.1.52.4.1.3.4.6.1.1.1 | ColumnctTransIbmLlcPort | read-only | mandatory | The MIB-II interface number of the port for which this entry is administering IBM LLC translation. |
| 1.3.6.1.4.1.52.4.1.3.4.6.1.1.2 | ColumnctTransIbmLlcNullMode | read-write | mandatory | IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Eth… |
| 1.3.6.1.4.1.52.4.1.3.4.6.1.1.3 | ColumnctTransIbmLlcSnaPathMode | read-write | mandatory | IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Eth… |
| 1.3.6.1.4.1.52.4.1.3.4.6.1.1.4 | ColumnctTransIbmLlcSnaMode | read-write | mandatory | IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Eth… |
| 1.3.6.1.4.1.52.4.1.3.4.6.1.1.5 | ColumnctTransIbmLlcNbMode | read-write | mandatory | IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Eth… |
| 1.3.6.1.4.1.52.4.1.3.4.6.1.1.6 | ColumnctTransIbmLlcLnmMode | read-write | mandatory | IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Eth… |
| 1.3.6.1.4.1.52.4.1.3.4.6.1.1.7 | ColumnctTransIbmLlcDscMode | read-write | mandatory | IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Eth… |
| 1.3.6.1.4.1.52.4.1.3.4.6.1.1.8 | ColumnctTransIbmLlcOtherMode | read-write | mandatory | IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Eth… |
| 1.3.6.1.4.1.52.4.1.3.4.6.1.1.9 | ColumnctTransIbmLlcOtherValue | read-write | mandatory | This object allows the user to select an IBM LLC LSAP value not specified above. When ctTransIbmLlcOtherMode is enabled all frames outbound on this token ring … |
| 1.3.6.1.4.1.52.4.1.3.4.7 | NodectTransSr | |||
| 1.3.6.1.4.1.52.4.1.3.4.7.1 | TablectTransSrTable | not-accessible | mandatory | A table of entries describing the source route configuration managed objects. |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1 | RowctTransSrEntry | not-accessible | mandatory | A list of objects to allow the configuration of source route translation information. |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1.1 | ColumnctTransSrPort | read-only | mandatory | The MIB-II interface number for which this entry is administering source route configuration management. |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1.2 | ColumnctTransSrIfMode | read-write | mandatory | This object indicates the types of frames (sr,tp or both) supported by endstations attached to this interface. This information is used by the device to determ… |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1.3 | ColumnctTransSrExpMode | read-write | mandatory | This object selects the type of explorer frame the SR or SRT interface will use, if and when an explorer frame is required. This object is only applicable when… |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1.4 | ColumnctTransSrIP | read-write | mandatory | This object determines how the sr/tp translation of IP frames of type 'broadcast', 'destination unknown', or 'destination known but IP not previously seen for … |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1.5 | ColumnctTransSrIPX | read-write | mandatory | This object determines how the sr/tp translation of IPX frames of type `broadcast`, `destination unknown`, or `destination known but IPX not previously seen fo… |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1.6 | ColumnctTransSrNetBIOS | read-write | mandatory | This object determines how the sr/tp translation of NetBIOS frames of type `broadcast`, `destination unknown`, or `destination known but NetBIOS not previously… |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1.7 | ColumnctTransSrSNA | read-write | mandatory | This object determines how the sr/tp translation of SNA frames of type 'broadcast', 'destination unknown', or 'destination known but SNA not previously seen fo… |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1.8 | ColumnctTransSrOther | read-write | mandatory | This object determines how the sr/tp translation of all 'other protocols' is handled. 'other protocols' includes any protocol not mentioned above (i.e. IP,IPX,… |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1.9 | ColumnctTransSRLocalSegment | read-write | mandatory | The segment (ring) number that uniquely identifies the segment to which this interface is connected. Current source routing protocols limit this value to the r… |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1.10 | ColumnctTransSrSRLF | read-write | mandatory | The maximum size of the INFO field (LLC and above) that this interface can send/receive. It does not include any MAC level (framing) octets. The value of this … |
| 1.3.6.1.4.1.52.4.1.3.4.7.1.1.11 | ColumnctTransSRAutoRingNumberDetect | read-write | mandatory | This object enables an interface to automatically detect the source route ring number of the attached ring segment. When enabled, the interface wil automatical… |
| 1.3.6.1.4.1.52.4.1.3.4.8 | NodectTransNovellCfg | |||
| 1.3.6.1.4.1.52.4.1.3.4.8.1 | TablectTransNovellCfgTable | not-accessible | mandatory | A list describing the enabled/disabled state of the Novell translation for each interface on this device. |
| 1.3.6.1.4.1.52.4.1.3.4.8.1.1 | RowctTransNovellCfgEntry | not-accessible | mandatory | A list of objects pertaining to the state of Novell translation for each interface. |
| 1.3.6.1.4.1.52.4.1.3.4.8.1.1.1 | ColumnctTransNovellCfgPort | read-only | mandatory | The MIB-II interface number of the port for which this entry is administering Novell configuration management. |
| 1.3.6.1.4.1.52.4.1.3.4.8.1.1.2 | ColumnctTransNovellCfgMode | read-write | mandatory | Enable this object indicates whether the device will reverse the bit ordering of addresses in the Novell header on Novell packets. Enable Type 2 indicates the … |
| 1.3.6.1.4.1.52.4.1.3.4.8.1.1.3 | ColumnctTransNovellGroupMode | read-write | mandatory | This object allows the conversion of group and multicast addresses in the MAC DA of the IPX protocol format. Conversion is as follows: TR(C0 00 00 80 00 00) an… |
| 1.3.6.1.4.1.52.4.1.3.4.9 | NodectTransIPCfg | |||
| 1.3.6.1.4.1.52.4.1.3.4.9.1 | TablectTransIPCfgTable | not-accessible | mandatory | A list describing the enabled/disabled state of the IP translation for each interface on this device. |
| 1.3.6.1.4.1.52.4.1.3.4.9.1.1 | RowctTransIPCfgEntry | not-accessible | mandatory | A list of objects pertaining to the state of IP translation for each interface. |
| 1.3.6.1.4.1.52.4.1.3.4.9.1.1.1 | ColumnctTransIPCfgPort | read-only | mandatory | The MIB-II interface number of the port for which this entry is administering IP configuration management. |
| 1.3.6.1.4.1.52.4.1.3.4.9.1.1.2 | ColumnctTransIPDataCfgMode | read-write | mandatory | This object indicates whether the device will reverse the bit ordering of addresses in the information field of IP data packets received and then transmitted o… |
| 1.3.6.1.4.1.52.4.1.3.4.9.1.1.3 | ColumnctTransIPArpCfgMode | read-write | mandatory | This object indicates whether the device will reverse the bit ordering of addresses in the information field of ARP packets received and then transmitted on th… |
| 1.3.6.1.4.1.52.4.1.3.4.9.1.1.4 | ColumnctTransIPRarpCfgMode | read-write | mandatory | This object indicates whether the device will reverse the bit ordering of addresses in the information field of RARP packets received and then transmitted on t… |
| 1.3.6.1.4.1.52.4.1.3.4.10 | NodectTransA2Cfg | |||
| 1.3.6.1.4.1.52.4.1.3.4.10.1 | TablectTransA2CfgTable | not-accessible | mandatory | A list describing the enabled/disabled state of the Appletalk2 translation for each interface on this device. |
| 1.3.6.1.4.1.52.4.1.3.4.10.1.1 | RowctTransA2CfgEntry | not-accessible | mandatory | A list of objects pertaining to the state of Appletalk2 translation for each interface. |
| 1.3.6.1.4.1.52.4.1.3.4.10.1.1.1 | ColumnctTransA2CfgPort | read-only | mandatory | The MIB-II interface number of the port for which this entry is administering Appletalk2 configuration management. |
| 1.3.6.1.4.1.52.4.1.3.4.10.1.1.2 | ColumnctTransA2DataCfgMode | read-write | mandatory | This object indicates whether the device will reverse the bit ordering of addresses in the information field of Appletalk2 data packets received and then trans… |
| 1.3.6.1.4.1.52.4.1.3.4.10.1.1.3 | ColumnctTransA2ArpCfgMode | read-write | mandatory | This object indicates whether the device will reverse the bit ordering of addresses in the information field of ARP packets received and then transmitted on th… |
| 1.3.6.1.4.1.52.4.1.3.4.10.1.1.4 | ColumnctTransA2McastCfgMode | read-write | mandatory | This object indicates whether the device will reverse the bit ordering of addresses in the information field of broadcast/multicast packets received and then t… |
| 1.3.6.1.4.1.52.4.1.3.4.11 | NodectTransOtherCfg | |||
| 1.3.6.1.4.1.52.4.1.3.4.11.1 | TablectTransOtherTable | not-accessible | mandatory | A list describing processing control for subgroups of LLC frames by SAP or SNAP type. This table allows the user to single out selected frame type groups for s… |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1 | RowctTransOtherEntry | not-accessible | mandatory | A list of objects pertaining to the processing of subgroups of LLC frames by SAP or SNAP type. |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.1 | ColumnctTransOtherPort | read-only | mandatory | The MIB-II interface number of the port for which this entry is administering control for subgroups of LLC frames by SAP or SNAP type. |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.2 | ColumnctTransOtherUnknownSap | read-write | mandatory | This object indicates whether any frames with an unrecognized SAP will require special translation handling by the processor. A recognized SAP will be specifie… |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.3 | ColumnctTransOtherUnknownSnap | read-write | mandatory | This object indicates whether frames with an unrecognized SNAP will require special translation handling by the processor. A recognized SNAP will be specified … |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.4 | ColumnctTransOtherSapDsap1Mode | read-write | mandatory | This object enables(1) or disables (2) the special translation handling of a SAP frame with a DSAP equal to ctTransOtherSapDsap1Val. The default of this object… |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.5 | ColumnctTransOtherSapDsap1Val | read-write | mandatory | This object allows the user to specify a DSAP value that when matched will require additional translation on frames. |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.6 | ColumnctTransOtherSapDsap2Mode | read-write | mandatory | This object enables(1) or disables (2) the special translation handling of a SAP frame with a DSAP equal to ctTransOtherSapDsap2Val. The default of this object… |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.7 | ColumnctTransOtherSapDsap2Val | read-write | mandatory | This object allows the user to specify a DSAP value that when matched will require additional translation on frames. |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.8 | ColumnctTransOtherSapDsap3Mode | read-write | mandatory | This object enables(1) or disables (2) the special translation handling of a SAP frame with a DSAP equal to ctTransOtherSapDsap3Val. The default of this object… |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.9 | ColumnctTransOtherSapDsap3Val | read-write | mandatory | This object allows the user to specify a DSAP value that when matched will require additional translation on frames. |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.10 | ColumnctTransOtherSnap1Mode | read-write | mandatory | When enabled (1) this object the value in ctTransOtherSnap1Val will be compared against the protocol values of all SNAP frames received on this interface. A ma… |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.11 | ColumnctTransOtherSnap1Val | read-write | mandatory | This object allows the user to specify a SNAP value to match against inbound SNAP frames for translation handling. |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.12 | ColumnctTransOtherSnap2Mode | read-write | mandatory | When enabled (1) this object the value in ctTransOtherSnap2Val will be compared against the protocol values of all SNAP frames received on this interface. A ma… |
| 1.3.6.1.4.1.52.4.1.3.4.11.1.1.13 | ColumnctTransOtherSnap2Val | read-write | mandatory | This object allows the user to specify a SNAP value to match against inbound SNAP frames for translation handling. |
| 1.3.6.1.4.1.52.4.1.3.4.12 | NodectTranslfpsCfg | |||
| 1.3.6.1.4.1.52.4.1.3.4.12.1 | TablectTransLfpsTable | not-accessible | mandatory | This table is for the user to configure the large frame ports ability to support large frames. The Large frame port support is done on a per port basis. The op… |
| 1.3.6.1.4.1.52.4.1.3.4.12.1.1 | RowctTransLfpsEntry | not-accessible | mandatory | A list of objects that pertain to the large frame port support table. |
| 1.3.6.1.4.1.52.4.1.3.4.12.1.1.1 | ColumnctTransLfpsPort | read-only | mandatory | The MIB-II interface number of the port for which this entry is administering control for subgroups of LLC frames by SAP or SNAP type. |
| 1.3.6.1.4.1.52.4.1.3.4.12.1.1.2 | ColumnctTransLfpsAdminStatus | read-write | mandatory | When large(1) is the setting all large frames are permissable out that port. fragment_if_possible(2) is used when the outport wants ip frames fragmented before… |
| 1.3.6.1.4.1.52.4.1.3.4.12.1.1.3 | ColumnctTransLfpsOperationalStatus | read-only | mandatory | This value represents the current operational mode of the interface. The operational mode should reflect what is set in the ctTransLfpsAdminStatus object. The … |