CTRON-VLAN-EXTENSIONS-MIB
51 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-MIB-NAMES | ctVlanExt |
| RFC-1212 | OBJECT-TYPE |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.16.1 | NodectVlanBridgeConfig | |||
| 1.3.6.1.4.1.52.4.1.2.16.1.1 | ScalarctVlanVersionNumber | read-only | mandatory | Specifies the IEEE 802.1Q VLAN version number. |
| 1.3.6.1.4.1.52.4.1.2.16.1.2 | ScalarctVlanSupportedOperationalMode | read-only | deprecated | This value indicates whether the device allows for flexible VLAN configuration as specified by ctVlanCurrentOperationalMode. A value of static(1) indicates tha… |
| 1.3.6.1.4.1.52.4.1.2.16.1.3 | ScalarctVlanCurrentOperationalMode | read-write | deprecated | This value indicates the number of bits in a VLAN Id that are considered significant in the forwarding decision of a packet. This allows VLANs to be grouped to… |
| 1.3.6.1.4.1.52.4.1.2.16.1.4 | ScalarctVlanResetDefaults | read-write | mandatory | A set of the value reset(2) will cause the ctVlanTriggerPortSet table to contain no entries, delete all objects from the ctVlanConfig group, and reset the ctVl… |
| 1.3.6.1.4.1.52.4.1.2.16.1.5 | ScalarctVlanDefaultVIDStickyEgress | read-write | mandatory | A set of the value enable(1) will cause a port, as specified by ctVlanPortNum, to remain in the egress list for the DEFAULT VLAN (VID 1) when the port's VID, s… |
| 1.3.6.1.4.1.52.4.1.2.16.1.6 | TablectVlanSupportedPortTable | not-accessible | mandatory | This table specifies which bridge ports on the device support VLANs. |
| 1.3.6.1.4.1.52.4.1.2.16.1.6.1 | RowctVlanSupportedPortEntry | not-accessible | mandatory | Specifies the bridge ports in the ctVlanSupportedPortTable. |
| 1.3.6.1.4.1.52.4.1.2.16.1.6.1.1 | ColumnctVlanSupportedSlotNum | read-only | mandatory | The slot number of the device that the bridge port is located on. |
| 1.3.6.1.4.1.52.4.1.2.16.1.6.1.2 | ColumnctVlanSupportedPortNum | read-only | mandatory | The set of ports on the device, specified by ctVlanSupportedSlotNum, that support VLANs. Each octet within the value of this object specifies a set of eight po… |
| 1.3.6.1.4.1.52.4.1.2.16.1.7 | ScalarctVlanLearningMode | read-only | mandatory | This value indicates the type of VLAN learning the device supports. A value of ivl(1) indicates the device supports Independent VLAN Learning (IVL). Configurat… |
| 1.3.6.1.4.1.52.4.1.2.16.2 | NodectVlanTriggerPortConfig | |||
| 1.3.6.1.4.1.52.4.1.2.16.2.1 | TablectVlanTriggerPortSetTable | not-accessible | mandatory | This table provides information pertaining to the ports participating in the GVRP triggering function. |
| 1.3.6.1.4.1.52.4.1.2.16.2.1.1 | RowctVlanTriggerPortEntry | not-accessible | mandatory | Specifies the bridge ports in the ctVlanTriggerPortSet table. |
| 1.3.6.1.4.1.52.4.1.2.16.2.1.1.1 | ColumnctVlanTriggerSlotNum | read-only | mandatory | The slot number of the device that the bridge port is located on. |
| 1.3.6.1.4.1.52.4.1.2.16.2.1.1.2 | ColumnctVlanTriggerStatus | read-write | mandatory | The set of ports that will participate in GVRP trigger functions. Each octet within the value of this object specifies a set of eight ports, with the first oct… |
| 1.3.6.1.4.1.52.4.1.2.16.3 | NodectVlanPortConfig | |||
| 1.3.6.1.4.1.52.4.1.2.16.3.1 | TablectVlanPortConfigTable | not-accessible | mandatory | This table provides general information about the VLAN configuration of all bridge ports on a device. |
| 1.3.6.1.4.1.52.4.1.2.16.3.1.1 | RowctVlanPortConfigEntry | not-accessible | mandatory | Describes a particular VLAN port configuration entry. |
| 1.3.6.1.4.1.52.4.1.2.16.3.1.1.1 | ColumnctVlanPortSlotNum | read-only | mandatory | The slot number of the device that the bridge port is located on. |
| 1.3.6.1.4.1.52.4.1.2.16.3.1.1.2 | ColumnctVlanPortNum | read-only | mandatory | The port number for which the information is requested. |
| 1.3.6.1.4.1.52.4.1.2.16.3.1.1.3 | ColumnctVlanPortVID | read-write | mandatory | The 12 bit Port VLAN Identifier (PVID) associated with the configured VLAN for received untagged packets on the port specified by ctVlanPortNum. The port speci… |
| 1.3.6.1.4.1.52.4.1.2.16.3.1.1.4 | ColumnctVlanPortDiscardFrame | read-write | mandatory | A set of noDiscard(1) causes the port to submit all packets received on the port to the forwarding process, regardless, of the absence or presence of a VLAN ta… |
| 1.3.6.1.4.1.52.4.1.2.16.3.1.1.5 | ColumnctVlanPortOperationalMode | read-write | mandatory | A set of dot1QTrunk(1) causes the port specified by ctVlanPortNum to transmit tagged frames exclusively, and ctVlanPortDiscardFrame is set to a value of discar… |
| 1.3.6.1.4.1.52.4.1.2.16.3.1.1.6 | ColumnctVlanPortIngressFiltering | read-write | mandatory | A set of enable(1) causes the forwarding process to discard any frame received on the port, specified by ctVlanPortNum, that is not a member of the classified … |
| 1.3.6.1.4.1.52.4.1.2.16.4 | NodectVlanConfig | |||
| 1.3.6.1.4.1.52.4.1.2.16.4.1 | ScalarctVlanNumActiveEntries | read-only | mandatory | The number of active VLAN entries for the device. |
| 1.3.6.1.4.1.52.4.1.2.16.4.2 | ScalarctVlanNumConfiguredEntries | read-only | mandatory | The number of configured VLAN entries for the device. This value includes active entries. |
| 1.3.6.1.4.1.52.4.1.2.16.4.3 | ScalarctVlanMaxNumEntries | read-only | mandatory | The maximum number of VLAN entries for the device. |
| 1.3.6.1.4.1.52.4.1.2.16.4.4 | TablectVlanConfigTable | not-accessible | mandatory | This table allows for the creation, deletion, and modification of specific VLANs. |
| 1.3.6.1.4.1.52.4.1.2.16.4.4.1 | RowctVlanConfigEntry | not-accessible | mandatory | Allows for configuration of specific VLAN entries. |
| 1.3.6.1.4.1.52.4.1.2.16.4.4.1.1 | ColumnctVlanVID | read-only | mandatory | The 12 bit VLAN Identifier associated with the configured VLAN. |
| 1.3.6.1.4.1.52.4.1.2.16.4.4.1.2 | ColumnctVlanName | read-write | mandatory | The ASCII name associated with the configured VLAN. A set of this object prior to creating an entry by setting ctVlanEstablish will fail with a NO-INSTANCE err… |
| 1.3.6.1.4.1.52.4.1.2.16.4.4.1.3 | ColumnctVlanStatus | read-write | mandatory | A set with the value of enable(1), enables all associated entries in ctVlanEgressPorts table for the specified VLAN. A set of disable(2), disables all ctVlanEg… |
| 1.3.6.1.4.1.52.4.1.2.16.4.4.1.4 | ColumnctVlanEstablish | read-write | mandatory | A set of the value create(1), causes an entry to be created in the ctVlanConfigTable as specified by the instancing information of ctVlanVID. Additionally, an … |
| 1.3.6.1.4.1.52.4.1.2.16.4.4.1.5 | ColumnctVlanIdToFidMapping | read-write | mandatory | The 12 bit Filter Database Identifier (FID) associated with the configured VLAN as specified by ctVlanVID. For devices operating in Independent VLAN Learning (… |
| 1.3.6.1.4.1.52.4.1.2.16.4.4.1.6 | ColumnctVlanType | read-only | mandatory | This object indicates the type for this entry. A value of other(1) indicates that this entry is currently in use but the conditions under which it will remain … |
| 1.3.6.1.4.1.52.4.1.2.16.4.5 | TablectVlanEgressPortsTable | not-accessible | mandatory | This table provides information pertaining to the egress ports for a particular VLAN. |
| 1.3.6.1.4.1.52.4.1.2.16.4.5.1 | RowctVlanEgressPortEntry | not-accessible | mandatory | Specifies the egress ports and frame types per port for the specified VLAN. |
| 1.3.6.1.4.1.52.4.1.2.16.4.5.1.1 | ColumnctVlanEgressPortSlotNum | read-only | mandatory | The slot number of the device that the VLAN is configured on. |
| 1.3.6.1.4.1.52.4.1.2.16.4.5.1.2 | ColumnctVlanEgressVID | read-only | mandatory | The 12 bit VLAN Identifier associated with the configured VLAN. |
| 1.3.6.1.4.1.52.4.1.2.16.4.5.1.3 | ColumnctVlanEgressList | read-write | mandatory | The set of ports to which traffic destined for the VLAN specified by ctVlanEgressVID on the device specified by ctVlanEgressPortSlotNum may be transmitted. Eac… |
| 1.3.6.1.4.1.52.4.1.2.16.4.5.1.4 | ColumnctVlanEgressUntaggedList | read-write | mandatory | The set of ports to which traffic destined for the VLAN specified by ctVlanEgressVID on the device specified by ctVlanEgressPortSlotNum should be untagged. Eac… |
| 1.3.6.1.4.1.52.4.1.2.16.5 | NodectVlanProtocolAssign | |||
| 1.3.6.1.4.1.52.4.1.2.16.5.1 | ScalarctVlanProtocolStatus | read-write | mandatory | This object allows the Protocol/Vlan feature to be disabled. |
| 1.3.6.1.4.1.52.4.1.2.16.5.2 | ScalarctMaxNumVlanProtoEntries | read-only | mandatory | The maximum number of entries allowed for the ctVlanProtoAssignTable table. |
| 1.3.6.1.4.1.52.4.1.2.16.5.3 | TablectVlanProtoAssignTable | not-accessible | mandatory | This table provides a mapping of protocol or Ether types to VLAN Ids for 'untagged' packets. |
| 1.3.6.1.4.1.52.4.1.2.16.5.3.1 | RowctVlanProtoAssignEntry | not-accessible | mandatory | Describes a particular protocol VLAN ID configuration entry. |
| 1.3.6.1.4.1.52.4.1.2.16.5.3.1.1 | ColumnctVlanProtoEtherType | read-only | mandatory | This object returns the protocol or Ether type that is mapped to the VLAN specified in it's instancing. This object takes the value of any valid Ether type(0x0… |
| 1.3.6.1.4.1.52.4.1.2.16.5.3.1.2 | ColumnctVlanProtoEstablish | read-write | mandatory | A set of the value create(1), causes an entry to be added to the ctVlanProtoAssignTable as specified by the instancing information of ctVlanVID and ctVlanProto… |
| 1.3.6.1.4.1.52.4.1.2.16.5.3.1.3 | ColumnctVlanProtoPortList | read-write | mandatory | The set of ports on the device, specified by ctVlanVID and ctVlanProtoEtherType, that will classify received 'untagged' packets of ctVlanProtoEtherType type, t… |