CTRON-WAN-MIB
272 objects
No module-level DESCRIPTION found.
Imported Objects
| CTRON-MIB-NAMES | ctWan |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.7.1.1 | NodectWanConnection | |||
| 1.3.6.1.4.1.52.4.1.2.7.1.1.1 | ScalarwanNumConnections | read-only | mandatory | This objects describes the number of wan connections on the platform. A wan connection may have one or two physical ports of which only one can be active at an… |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.2 | TablewanConnTable | not-accessible | mandatory | A list of wan connection entries. The number of wan connection entries is given by the value of wanNumConnections. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.2.1 | RowwanConnEntry | not-accessible | mandatory | A wan connection entry containing objects relating to the particular wan connection. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.2.1.1 | ColumnwanConnIndex | read-only | mandatory | A unique value for each wan connection. Its value ranges between 1 and the value wanNumConnections. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.2.1.2 | ColumnwanConnNumPhysPorts | read-only | mandatory | The number of physical ports that exist on this wan connection. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.2.1.3 | ColumnwanConnDefaultPhysPort | read-write | mandatory | The default physical port for this connection. This indicates the physical port that should be used on this wan connection. If redundancy is not enabled, this … |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.2.1.4 | ColumnwanConnActivePhysPort | read-only | mandatory | The physical port that is currently active for this wan connection. The value of this object indicates the wanPhysPortIndex for the active port. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.3 | TablewanPhysPortTable | not-accessible | mandatory | A list of the descriptions of the physical ports of this platform. The number of entries is given by the value of wanConnNumPhysPort for each Wan Connection. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.3.1 | RowwanPhysPortEntry | not-accessible | mandatory | A physical port entry. It contains objects relating to a given physical port |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.3.1.1 | ColumnwanPhysPortConnectionIndex | read-only | mandatory | A value indicating the wan connection this physical port is located on. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.3.1.2 | ColumnwanPhysPortIndex | read-only | mandatory | A unique value for each physical port on a wan connection. Its value ranges between 1 and the value wanConnNumPhysPorts. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.3.1.3 | ColumnwanPhysPortType | read-only | mandatory | The type of physical port that this entry describes. None indicates that the physical port has no connector. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.3.1.4 | ColumnwanPhysPortSpecificMib | read-only | mandatory | This object identifies an instance of the index object in the first group of objects in the MIB specific to the physical port. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4 | TablewanInterfaceTable | not-accessible | mandatory | The interface table for a physical port on a wan connection. It is a list of items that are pertinent to the interfaces that are part of this physical port. Th… |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1 | RowwanInterfaceEntry | not-accessible | mandatory | A wan connection physical port interface entry. It contains objects relating to an interface that is defined for this physical port and this wan connection. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.1 | ColumnwanInterfaceConnectionIndex | read-only | mandatory | This value is the wan connection that this interface exists on. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.2 | ColumnwanInterfacePhysPortIndex | read-only | mandatory | This value is the physical port of the wan connection that this interface exists on. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.3 | ColumnwanInterfaceEntryIndex | read-only | mandatory | A unique value for each interface of this physical port. It is a value between 1 and the number of interfaces that exist for the current port. The number of in… |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.4 | ColumnwanInterfaceEntryIfIndex | read-only | mandatory | The ifIndex of the interface. This is the index of this entry in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.5 | ColumnwanInterfaceEntryProtocol | read-write | mandatory | The protocol that should be run on this interface. Values are equivalent to those defined for ifType in Mib-II. Accepted values are product dependent. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.6 | ColumnwanInterfaceEntryCompression | read-write | mandatory | Indicates whether data compression should take place on this interface. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.7 | ColumnwanInterfaceEntryMTU | read-write | mandatory | The MTU to be negotiated for this interface. This will not be updated with the actual MTU, which can be found in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.8 | ColumnwanInterfaceEntryLineCoding | read-write | mandatory | This object describes the variety of Zero Code suppression on this interface. For an interface on a Ds1 Port, the valid values depend on the value of the Ds1Co… |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.9 | ColumnwanInterfaceEntryCrcLength | read-write | mandatory | The Length of the CRC for this interface. Not all platforms will allow all options. |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.10 | ColumnwanInterfaceEntryLexProtocolEnable | read-write | deprecated | This switch acts in concert with the wanInterfaceEntryProtocol object. To activate LEX, this object should first be set to enable (1), then set the wanInterfac… |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.11 | ColumnwanInterfaceEntryLexProtocolStatus | read-only | deprecated | This object reflects the current state of the link. The device is said to be bound to the router when the physical link is OK, the LEX negotiation is successfu… |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.12 | ColumnwanInterfaceEntryCompRatio | read-only | mandatory | The ratio of uncompressed to compressed transmitted data. If the data compression status is off, 1:1 will be displayed |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.13 | ColumnwanInterfaceEntryCompStatus | read-only | mandatory | On indicates that the compression has been successfully negotiated and is operating. Off indicates that the compression negotiation has failed and compression … |
| 1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.14 | ColumnwanInterfaceEntryBackUpIfEnable | read-write | mandatory | This object is used to select the Call-backup option. A value of 1 is used to enable the option and a value of 2 to disable it. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2 | NodectWanDs1 | |||
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1 | TablewanDs1ExtensionsTable | not-accessible | mandatory | This table is an extension to the standard ds1 configuration table. It is a list of items that are pertinent to ds1 ports on a platform. There is one entry per… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1 | RowwanDs1ExtensionsEntry | not-accessible | mandatory | A ds1 extensions entry containing objects relating to the particular ds1 physical port |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.1 | ColumnwanDs1ExtensionsEntryIndex | read-only | mandatory | A unique value for each ds1 physical port on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.2 | ColumnwanDs1ExtensionsNumInterfaces | read-only | mandatory | The number of interfaces on this physical port. This number indicates the number of entries this physical port uses in the ifTable. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.3 | ColumnwanDs1ExtensionsToggleFracTable | read-write | mandatory | Setting this object to 1 will cause the Ds1 Fractional Table to be updated with the new values, as entered. Setting this object to 2, will cause the Ds1 Fracti… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.4 | ColumnwanDs1ExtensionsLineBuildOut | read-write | mandatory | The line build out setting for this ds1 physical port. Unknown indicates that the setting is neither readable or writable. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.5 | ColumnwanDs1ExtensionsCFADuration | read-write | mandatory | The length of time (in seconds), that the ds1 port will remain in the Carrier Failure Alarm state after the alarm condition has cleared. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.6 | ColumnwanDs1ExtensionsDIEnable | read-write | mandatory | Enables or disables Drop and Insert functionality on a D/I WPIM. If enabled, all zero assigned timeslots will designate D/I interface channels, if disabled all… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.7 | ColumnwanDs1ExtensionsTotalValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected for the DS1 mib, which is currently RFC1406. This counter is similar to RFC1406 dsx1ValidIn… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.8 | ColumnwanDs1ExtensionsBertTestMode | read-write | mandatory | This object is used to request that a type of process be in control of the testing function. This is used to differentiate between automated test procedures an… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.9 | ColumnwanDs1ExtensionsBertRun | read-write | mandatory | Controls the sending of test data over this physical port. The data is a pattern described by wanDs1ExtensionsBertTestPattern. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.10 | ColumnwanDs1ExtensionsBertCurrentResults | read-only | mandatory | Indicates the results of the testing for the last completed sampling period. A non-negative number is the error rate in bits per million bits. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.11 | ColumnwanDs1ExtensionsBertCumulativeResults | read-only | mandatory | Indicates the total number of errors since the testing was enabled. It is not a rate. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.12 | ColumnwanDs1ExtensionsBertPeakResults | read-only | mandatory | Indicates the highest value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the error rate in bits per million bi… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.13 | ColumnwanDs1ExtensionsBertAverageResult | read-only | mandatory | Indicates the average value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the error rate in bits per million bi… |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.14 | ColumnwanDs1ExtensionsBertTestPattern | read-write | mandatory | This object is used to specify the pattern of the test data. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.15 | ColumnwanDs1ExtensionsBertSamplePeriod | read-write | mandatory | This object is the duration of time in seconds at which the current test results will be periodically written to wanDs1ExtensionsBertCurrentResults. The range … |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.16 | ColumnwanDs1ExtensionsBertNumPeriods | read-only | mandatory | The number of sampling periods that have elapsed during the current test run. |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.17 | ColumnwanDs1ExtensionsBertTestTraps | read-write | mandatory | This object is used to enable or disable the sending of a trap at the conclusion of the measurement period. The trap will contain the information described by … |
| 1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.18 | ColumnwanDs1ExtensionsBertDataStatus | read-only | mandatory | This object provides the operating status of the transmission of test data packets. |
| 1.3.6.1.4.1.52.4.1.2.7.1.3 | NodectWanRs232 | |||
| 1.3.6.1.4.1.52.4.1.2.7.1.3.1 | TablewanRs232ExtensionsTable | not-accessible | mandatory | This table is an extension to the standard rs232-like mib. It is a list of items that are pertinent to rs232-like ports on a platform. There is one entry per s… |
| 1.3.6.1.4.1.52.4.1.2.7.1.3.1.1 | RowwanRs232ExtensionsEntry | not-accessible | mandatory | A rs232-like extensions entry containing objects relating to the particular rs232-like physical port. |
| 1.3.6.1.4.1.52.4.1.2.7.1.3.1.1.1 | ColumnwanRs232ExtensionsEntryIndex | read-only | mandatory | A unique value for each rs232-like physical port on the platform. |
| 1.3.6.1.4.1.52.4.1.2.7.1.3.1.1.2 | ColumnwanRs232ExtensionsCTSEnable | read-write | mandatory | This object indicates whether the platform should generate CTS. When disabled the platform will not generate CTS, when enabled, the platform will generate CTS.… |
| 1.3.6.1.4.1.52.4.1.2.7.1.3.1.1.3 | ColumnwanRs232ExtensionsDSREnable | read-write | mandatory | This object indicates whether the platform should generate DSR. When disabled the platform will not generate DSR, when enabled, the platform will generate DSR.… |
| 1.3.6.1.4.1.52.4.1.2.7.1.4 | NodectFrDcp | |||
| 1.3.6.1.4.1.52.4.1.2.7.1.4.1 | TablefrDcpCircuitTable | not-accessible | mandatory | A table containing data compression information about specific Data Link Connection Identifiers and corresponding virtual circuit. This information is used to … |
| 1.3.6.1.4.1.52.4.1.2.7.1.4.1.1 | RowfrDcpCircuitEntry | not-accessible | mandatory | The data compression information regarding a single Data Link Connection Identifier. |
| 1.3.6.1.4.1.52.4.1.2.7.1.4.1.1.1 | ColumnfrDcpCircuitIfIndex | read-only | mandatory | The ifIndex value of ifEntry that this DCP virtual circuit object is layered onto. |
| 1.3.6.1.4.1.52.4.1.2.7.1.4.1.1.2 | ColumnfrDcpCircuitDlci | read-only | mandatory | The Data Link Connection Identifier for this DCP virtual circuit object. |
| 1.3.6.1.4.1.52.4.1.2.7.1.4.1.1.3 | ColumnfrDcpCircuitEnable | read-write | mandatory | Indicates whether data compression should take place on this particular end side virtual circuit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.4.1.1.4 | ColumnfrDcpCircuitStatus | read-only | mandatory | On indicates that the compression has been successfully negotiated and is operating. Off indicates that the compression negotiation has failed and compression … |
| 1.3.6.1.4.1.52.4.1.2.7.1.4.1.1.5 | ColumnfrDcpCircuitRatio | read-only | mandatory | The ratio of uncompressed to compressed transmitted data. If the data compression status is off, 1:1 will be displayed |
| 1.3.6.1.4.1.52.4.1.2.7.1.5 | NodectDDS | |||
| 1.3.6.1.4.1.52.4.1.2.7.1.5.1 | TableddsConfigTable | not-accessible | mandatory | The DDS Configuration Table |
| 1.3.6.1.4.1.52.4.1.2.7.1.5.1.1 | RowddsConfigEntry | not-accessible | mandatory | An Entry in the DDS Configuration Table |
| 1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.1 | ColumnddsLineIndex | read-only | mandatory | A unique value for each dds physical port on the platform |
| 1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.2 | ColumnddsIfIndex | read-only | mandatory | Index associated with this dds physical port |
| 1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.3 | ColumnddsLineMode | read-write | mandatory | |
| 1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.4 | ColumnddsLineCoding | read-write | mandatory | This object describes the variety of Zero Code suppression on this interface. JBZS refers to Jammed Bit Zero suppression, which forces a 1 bit every 8 bit peri… |
| 1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.5 | ColumnddsLoopbackConfig | read-write | mandatory | This variable represents the loop-back configuration of the DDS interface. ddsNoLoop means the interface is not in loop-back state, and LineLoop means the the … |
| 1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.6 | ColumnddsLineStatus | read-only | mandatory | This describes the current operational status of DDS line. |
| 1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.7 | ColumnddsTxClockSource | read-write | mandatory | The source of Transmit clock. ddsLoopTiming - indicates that the recovered receive clock is used as transmit clock. ddsLocalTiming - indicates that a local clo… |
| 1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.8 | ColumnddsPortInSpeed | read-only | mandatory | This variable describes the current operational receive speed of DDS line. It is a read only value based entirely on DDS type (CC or PRI). |
| 1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.9 | ColumnddsPortOutSpeed | read-only | mandatory | This variable describes the current operational transmit speed of DDS line. It is a read only value based entirely on DDS type CC or PRI |
| 1.3.6.1.4.1.52.4.1.2.7.1.6 | NodectDs1Alarms | |||
| 1.3.6.1.4.1.52.4.1.2.7.1.6.1 | Nodeds1AlarmsGlobalConfigGroup | |||
| 1.3.6.1.4.1.52.4.1.2.7.1.6.1.1 | Scalards1AlarmGlobalAdmin | read-write | mandatory | Used to enable and disable the DS1 Alarm Monitoring Application for all DS1 circuits on the device. |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.1.2 | Scalards1AlarmGlobalAutoRecovery | read-write | mandatory | Used to enable and disable the DS1 Alarm Automatic Recovery feature for all DS1 circuits on the device. For those devices that support ds1 alarm monitoring, bu… |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.1.3 | Scalards1AlarmGlobalTrapEnable | read-write | mandatory | Used to enable and disable the DS1 Alarm SNMP Trap generation feature for all DS1 circuits on the device. This object operates in conjunction with configuratio… |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.1.4 | Scalards1AlarmGlobalESCount | read-write | mandatory | Used in conjuction with ctDs1AlarmESInterval to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measur… |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.1.5 | Scalards1AlarmGlobalESInterval | read-write | mandatory | Used in conjuction with ds1AlarmGlobalESCount to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measu… |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.1.6 | Scalards1AlarmGlobalBPVErrorRate | read-write | mandatory | Used to specify the negative exponent of 10, used in monitoring Bipolar Violations (Code Violations for E1) over intervals defined by ds1AlarmGlobalBPVInterval… |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.1.7 | Scalards1AlarmGlobalBPVInterval | read-write | mandatory | Used to specify the interval, used in monitoring Bipolar Violations (Code Violations for E1) with thresholds defined by ds1AlarmGlobalBPVErrorRate. For example… |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.1.8 | Scalards1AlarmGlobalManualRecovery | read-write | mandatory | To cause a manual recovery to occur on all Ds1 circuits, this object is set to a 1. It is always read as a 1. The recovery will occur only when automatic recov… |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.2 | Tableds1AlarmConfigTable | not-accessible | mandatory | Table containing objects used to configure DS1 alarm functionality on a per DS1 basis. |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.2.1 | Rowds1AlarmConfigEntry | not-accessible | mandatory | A description of a single entry. |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.1 | Columnds1PhysNum | read-only | mandatory | The value for this object is equal to the value of a unique physical connection identifier associated with this DS1 which is clearly labeled on the device. For… |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.2 | Columnds1AlarmAdmin | read-write | mandatory | Used to enable and disable the DS1 Alarm Monitoring Application for this DS1 circuit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.3 | Columnds1AlarmAutoRecovery | read-write | mandatory | Used to enable and disable the DS1 Alarm Automatic Recovery feature for this DS1 circuit. For those devices that support ds1 alarm monitoring, but do not suppo… |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.4 | Columnds1AlarmTrapEnable | read-write | mandatory | Used to enable and disable the DS1 Alarm SNMP Trap generation feature for this DS1 circuit. This object operates in conjunction with configuration of objects i… |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.5 | Columnds1AlarmESCount | read-write | mandatory | Used in conjuction with ctDs1AlarmESInterval to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measur… |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.6 | Columnds1AlarmESInterval | read-write | mandatory | Used in conjuction with ctDs1AlarmESCount to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measured … |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.7 | Columnds1AlarmBPVErrorRate | read-write | mandatory | Used to specify the negative exponent of 10, used in monitoring Bipolar Violations (Code Violations for E1) over intervals defined by ds1AlarmBPVInterval. For … |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.8 | Columnds1AlarmBPVInterval | read-write | mandatory | Used to specify the interval, used in monitoring Bipolar Violations (Code Violations for E1) with thresholds defined by ds1AlarmBPVErrorRate. For example, for … |
| 1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.9 | Columnds1AlarmManualRecovery | read-write | mandatory | To cause a manual recovery to occur, this object is set to a 1. It is always read as a 1. The recovery will occur only when automatic recovery is disabled. |
| 1.3.6.1.4.1.52.4.1.2.7.1.7 | NodectIPPQFilters | |||
| 1.3.6.1.4.1.52.4.1.2.7.1.7.1 | NodeipPQConfigGroup | |||
| 1.3.6.1.4.1.52.4.1.2.7.1.7.1.1 | ScalaripPQAdmin | read-write | mandatory | Used to enable and disable the IP Priority Queue Forwarding Application. |
| 1.3.6.1.4.1.52.4.1.2.7.1.7.1.2 | ScalariPPQMaxEntries | read-only | mandatory | Returns the maximum number of IP address entries supported by the IP Priority Queue application on this device. |
| 1.3.6.1.4.1.52.4.1.2.7.1.7.1.3 | ScalariPPQNumEntries | read-only | mandatory | Get the number of IP address entries currently programmed in the ipPQAddressTable. |
| 1.3.6.1.4.1.52.4.1.2.7.1.7.1.4 | ScalariPPQAddAddress | read-write | mandatory | Add an IP address to the ipPQAddressTable. Always read as a 0.0.0.0. |
| 1.3.6.1.4.1.52.4.1.2.7.1.7.1.5 | ScalariPPQDelAddress | read-write | mandatory | Delete an IP address from the ipPQAddressTable. Always read as a 0.0.0.0. |
| 1.3.6.1.4.1.52.4.1.2.7.1.7.2 | TableipPQAddressTable | not-accessible | mandatory | Table containing IP addresses, used in an IP Priority Queue Forwarding function. |
| 1.3.6.1.4.1.52.4.1.2.7.1.7.2.1 | RowipPQAddressEntry | not-accessible | mandatory | A description of a single entry. |
| 1.3.6.1.4.1.52.4.1.2.7.1.7.2.1.1 | ColumnipPQAddressId | read-only | mandatory | A unique value identifying an element in a sequence of IP PQ address entries. |
| 1.3.6.1.4.1.52.4.1.2.7.1.7.2.1.2 | ColumnipPQIPAddress | read-only | mandatory | Returns an IP address associated with a specific entry in this table. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8 | NodectWanHDSLExt | |||
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1 | TablectWanHDSLPerformance15mTable | not-accessible | mandatory | HDSL 15 minute performance table. This table provides the accumulated counts of errored seconds (ES) and unavailable seconds (UAS) for the HDSL line including … |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1 | RowctWanHDSLPerformance15mEntry | not-accessible | mandatory | Entries in the 15 minute performance table |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.1 | ColumnctWanHDSLPerformance15mConnIndex | read-only | mandatory | Identify the HDSL connection within the device, indexing from 1 to the maximum allowed number of HDSL connections in the device. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.2 | ColumnctWanHDSLPerformance15mSlotIndex | read-only | mandatory | Define which 15-minute slot history of the HDSL within the 24 hour period. Indexing from 1 - 97 with the first index representing the current 15-minute history |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.3 | ColumnctWanHDSLHLULoop1UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the local line unit during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.4 | ColumnctWanHDSLHLULoop1ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 1 of the local line unit during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.5 | ColumnctWanHDSLHLULoop2UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the local line unit during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.6 | ColumnctWanHDSLHLULoop2ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the local line unit during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.7 | ColumnctWanHDSLHRULoop1UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the remote line unit during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.8 | ColumnctWanHDSLHRULoop1ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 1 of the remote line unit during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.9 | ColumnctWanHDSLHRULoop2UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the remote line unit during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.10 | ColumnctWanHDSLHRULoop2ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the remote line unit during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.11 | ColumnctWanHDSLDb1NetworkLoop1UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's network side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.12 | ColumnctWanHDSLDb1NetworkLoop1ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 1 of the first doubler unit's network side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.13 | ColumnctWanHDSLDb1NetworkLoop2UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's network side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.14 | ColumnctWanHDSLDb1NetworkLoop2ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the first doubler unit's network side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.15 | ColumnctWanHDSLDb1CustomerLoop1UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's customer side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.16 | ColumnctWanHDSLDb1CustomerLoop1ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 1 of the first doubler unit's customer side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.17 | ColumnctWanHDSLDb1CustomerLoop2UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's customer side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.18 | ColumnctWanHDSLDb1CustomerLoop2ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the first doubler unit's customer side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.19 | ColumnctWanHDSLDb2NetworkLoop1UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's network side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.20 | ColumnctWanHDSLDb2NetworkLoop1ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the second doubler unit's network side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.21 | ColumnctWanHDSLDb2NetworkLoop2UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's network side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.22 | ColumnctWanHDSLDb2NetworkLoop2ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the second doubler unit's network side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.23 | ColumnctWanHDSLDb2CustomerLoop1UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's customer side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.24 | ColumnctWanHDSLDb2CustomerLoop1ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 1 of the second doubler unit's customer side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.25 | ColumnctWanHDSLDb2CustomerLoop2UAS15m | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's customer side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.26 | ColumnctWanHDSLDb2CustomerLoop2ES15m | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the second doubler unit's customer side during the 15-minute period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2 | TablectWanHDSLPerformance24hTable | not-accessible | mandatory | HDSL 24-hour performance table. This table provides the accumulated counts of errored seconds (ES) and unavailable seconds (UAS) for the HDSL line including th… |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1 | RowctWanHDSLPerformance24hEntry | not-accessible | mandatory | Entries in the 24-hour ctWanHDSLPerformance table |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.1 | ColumnctWanHDSLPerformance24hConnIndex | read-only | mandatory | Identify the HDSL connection within the device, indexing from 1 to the maximum allowed number of HDSL connections in the device. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.2 | ColumnctWanHDSLPerformance24hSlotIndex | read-only | mandatory | Define which 24-hour slot history of the HDSL within the last 7 days period. Indexing from 1 - 8 with the first index representing the current 24 hour history |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.3 | ColumnctWanHDSLHLULoop1UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the local line unit during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.4 | ColumnctWanHDSLHLULoop1ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 1 of the local line unit during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.5 | ColumnctWanHDSLHLULoop2UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the local line unit during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.6 | ColumnctWanHDSLHLULoop2ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the local line unit during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.7 | ColumnctWanHDSLHRULoop1UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the remote line unit during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.8 | ColumnctWanHDSLHRULoop1ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 1 of the remote line unit during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.9 | ColumnctWanHDSLHRULoop2UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the remote line unit during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.10 | ColumnctWanHDSLHRULoop2ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the remote line unit during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.11 | ColumnctWanHDSLDb1NetworkLoop1UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's network side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.12 | ColumnctWanHDSLDb1NetworkLoop1ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 1 of the first doubler unit's network side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.13 | ColumnctWanHDSLDb1NetworkLoop2UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's network side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.14 | ColumnctWanHDSLDb1NetworkLoop2ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the first doubler unit's network side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.15 | ColumnctWanHDSLDb1CustomerLoop1UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's customer side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.16 | ColumnctWanHDSLDb1CustomerLoop1ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 1 of the first doubler unit's customer side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.17 | ColumnctWanHDSLDb1CustomerLoop2UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's customer side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.18 | ColumnctWanHDSLDb1CustomerLoop2ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the first doubler unit's customer side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.19 | ColumnctWanHDSLDb2NetworkLoop1UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's network side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.20 | ColumnctWanHDSLDb2NetworkLoop1ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 1 of the second doubler unit's network side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.21 | ColumnctWanHDSLDb2NetworkLoop2UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's network side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.22 | ColumnctWanHDSLDb2NetworkLoop2ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the second doubler unit's network side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.23 | ColumnctWanHDSLDb2CustomerLoop1UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's customer side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.24 | ColumnctWanHDSLDb2CustomerLoop1ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 1 of the second doubler unit's customer side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.25 | ColumnctWanHDSLDb2CustomerLoop2UAS24h | read-only | mandatory | Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's customer side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.26 | ColumnctWanHDSLDb2CustomerLoop2ES24h | read-only | mandatory | Errored seconds (ES) on LOOP 2 of the second doubler unit's customer side during the 24-hour period. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3 | TablectWanHDSLStatisticsTable | not-accessible | mandatory | This table collects the statistics for the Signal noise ratio (SNR), and the pulse attenuation of the HDSL line, including the local, remote units and the doub… |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1 | RowctWanHDSLStatisticsEntry | not-accessible | mandatory | Entries of the HDSL statistics table |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.1 | ColumnctWanHDSLStatisticsHLUConnIndex | read-only | mandatory | Identify the HDSL connection occupied in the device, indexing from 1 to the maximum allowed connections in the device. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.2 | ColumnctWanHDSLSNRHLULoop1 | read-only | mandatory | Current SNR on LOOP 1 of the local line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.3 | ColumnctWanHDSLSNRLowHLULoop1 | read-only | mandatory | Lowest SNR on LOOP 1 of the local line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.4 | ColumnctWanHDSLSNRHighHLULoop1 | read-only | mandatory | Highest SNR on LOOP 1 of the local line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.5 | ColumnctWanHDSLSNRHLULoop2 | read-only | mandatory | Current SNR on LOOP 2 of the local line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.6 | ColumnctWanHDSLSNRLowHLULoop2 | read-only | mandatory | Lowest SNR on LOOP 2 of the local line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.7 | ColumnctWanHDSLSNRHighHLULoop2 | read-only | mandatory | Highest SNR on LOOP 2 of the local line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.8 | ColumnctWanHDSLPulseAttenuationHLULoop1 | read-only | mandatory | pulse Attenuation on LOOP 1 of the local line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.9 | ColumnctWanHDSLPulseAttenuationHLULoop2 | read-only | mandatory | pulse Attenuation on LOOP 2 of the local line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.10 | ColumnctWanHDSLBitStat1HLU | read-only | mandatory | A byte value which contains product specific information: bit 0 - System in AIS on the local line unit. 1 - System in AIS on the remote line unit. 2 - Channels… |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.11 | ColumnctWanHDSLSNRHRULoop1 | read-only | mandatory | Current SNR on LOOP 1 of the remote line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.12 | ColumnctWanHDSLSNRLowHRULoop1 | read-only | mandatory | Lowest SNR on LOOP 1 of the remote line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.13 | ColumnctWanHDSLSNRHighHRULoop1 | read-only | mandatory | Highest SNR on LOOP 1 of the remote line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.14 | ColumnctWanHDSLSNRHRULoop2 | read-only | mandatory | Current SNR on LOOP 2 of the remote line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.15 | ColumnctWanHDSLSNRLowHRULoop2 | read-only | mandatory | Lowest SNR on LOOP 2 of the remote line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.16 | ColumnctWanHDSLSNRHighHRULoop2 | read-only | mandatory | Highest SNR on LOOP 2 of the remote line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.17 | ColumnctWanHDSLPulseAttenuationHRULoop1 | read-only | mandatory | pulse Attenuation on LOOP 1 of the remote line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.18 | ColumnctWanHDSLPulseAttenuationHRULoop2 | read-only | mandatory | pulse Attenuation on LOOP 2 of the remote line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.19 | ColumnctWanHDSLDs1FrameHRU | read-only | mandatory | Byte value shows DS1 frame and code information for the remote line unit (HiGain only): bit 0:1 - 0 - frame format is SF. 1 - frame format is ESF. 2 - Frame fo… |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.20 | ColumnctWanHDSLSNRDb1NetworkLoop1 | read-only | mandatory | Current SNR on LOOP 1 of doubler 1's network side |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.21 | ColumnctWanHDSLSNRLowDb1NetworkLoop1 | read-only | mandatory | Lowest SNR on LOOP 1 of doubler 1's network side |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.22 | ColumnctWanHDSLSNRHighDb1NetworkLoop1 | read-only | mandatory | Highest SNR on LOOP 1 of doubler 1's network side |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.23 | ColumnctWanHDSLSNRDb1NetworkLoop2 | read-only | mandatory | Current SNR on LOOP 2 of doubler 1's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.24 | ColumnctWanHDSLSNRLowDb1NetworkLoop2 | read-only | mandatory | Lowest SNR on LOOP 2 of doubler 1's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.25 | ColumnctWanHDSLSNRHighDb1NetworkLoop2 | read-only | mandatory | Highest SNR on LOOP 2 of doubler 1's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.26 | ColumnctWanHDSLSNRDb1CustomerLoop1 | read-only | mandatory | Current SNR on LOOP 1 of doubler 1's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.27 | ColumnctWanHDSLSNRLowDb1CustomerLoop1 | read-only | mandatory | Lowest SNR on LOOP 1 of doubler 1's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.28 | ColumnctWanHDSLSNRHighDb1CustomerLoop1 | read-only | mandatory | Highest SNR on LOOP 1 of doubler 1's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.29 | ColumnctWanHDSLSNRDb1CustomerLoop2 | read-only | mandatory | Current SNR on LOOP 2 of doubler 1's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.30 | ColumnctWanHDSLSNRLowDb1CustomerLoop2 | read-only | mandatory | Lowest SNR on LOOP 2 of doubler 1's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.31 | ColumnctWanHDSLSNRHighDb1CustomerLoop2 | read-only | mandatory | Highest SNR on LOOP 2 of doubler 1's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.32 | ColumnctWanHDSLPulseAttenuationDb1NetworkLoop1 | read-only | mandatory | Pulse Attenuation on LOOP 1 of doubler 1's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.33 | ColumnctWanHDSLPulseAttenuationDb1NetworkLoop2 | read-only | mandatory | Pulse Attenuation on LOOP 2 of doubler 1's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.34 | ColumnctWanHDSLPulseAttenuationDb1CustomerLoop1 | read-only | mandatory | Pulse Attenuation on LOOP 1 of doubler 1's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.35 | ColumnctWanHDSLPulseAttenuationDb1CustomerLoop2 | read-only | mandatory | pulse Attenuation on LOOP 2 of doubler 1's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.36 | ColumnctWanHDSLSNRDb2NetworkLoop1 | read-only | mandatory | Current SNR on LOOP 1 of doubler 2's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.37 | ColumnctWanHDSLSNRLowDb2NetworkLoop1 | read-only | mandatory | Lowest SNR on LOOP 1 of doubler 2's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.38 | ColumnctWanHDSLSNRHighDb2NetworkLoop1 | read-only | mandatory | Highest SNR on LOOP 1 of doubler 2's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.39 | ColumnctWanHDSLSNRDb2NetworkLoop2 | read-only | mandatory | Current SNR on LOOP 2 of doubler 2's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.40 | ColumnctWanHDSLSNRLowDb2NetworkLoop2 | read-only | mandatory | Lowest SNR on LOOP 2 of doubler 2's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.41 | ColumnctWanHDSLSNRHighDb2NetworkLoop2 | read-only | mandatory | Highest SNR on LOOP 2 of doubler 2's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.42 | ColumnctWanHDSLSNRDb2CustomerLoop1 | read-only | mandatory | Current SNR on LOOP 1 of doubler 2's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.43 | ColumnctWanHDSLSNRLowDb2CustomerLoop1 | read-only | mandatory | Lowest SNR on LOOP 1 of doubler 2's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.44 | ColumnctWanHDSLSNRHighDb2CustomerLoop1 | read-only | mandatory | Highest SNR on LOOP 1 of doubler 2's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.45 | ColumnctWanHDSLSNRDb2CustomerLoop2 | read-only | mandatory | Current SNR on LOOP 2 of doubler 2's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.46 | ColumnctWanHDSLSNRLowDb2CustomerLoop2 | read-only | mandatory | Lowest SNR on LOOP 2 of doubler 2's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.47 | ColumnctWanHDSLSNRHighDb2CustomerLoop2 | read-only | mandatory | Highest SNR on LOOP 2 of doubler 2's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.48 | ColumnctWanHDSLPulseAttenuationDb2NetworkLoop1 | read-only | mandatory | Pulse Attenuation on LOOP 1 of doubler 2's network side |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.49 | ColumnctWanHDSLPulseAttenuationDb2NetworkLoop2 | read-only | mandatory | Pulse Attenuation on LOOP 2 of doubler 2's network side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.50 | ColumnctWanHDSLPulseAttenuationDb2CustomerLoop1 | read-only | mandatory | pulse Attenuation on LOOP 1 of doubler 2's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.51 | ColumnctWanHDSLPulseAttenuationDb2CustomerLoop2 | read-only | mandatory | Pulse Attenuation on LOOP 2 of doubler 2's customer side. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.4 | TablectWanHDSLTestTable | not-accessible | mandatory | Test result for the HDSL line, the current test results only apply to the local line unit. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.4.1 | RowctWanHDSLTestEntry | not-accessible | mandatory | Entries of the HDSL test results table. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.1 | ColumnctWanHDSLTestHLUConnIndex | read-only | mandatory | Identify the slot of the HDSL within the device that the user wants to conduct the line unit test. Slot number start from 1 to maximum slots available in the d… |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.2 | ColumnctWanHDSLTestMode | read-write | mandatory | This object may only be successfully set on a master device. When this object is set, the local unit's test mode is defined by these values when set: 1 - Norma… |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.3 | ColumnctWanHDSLHLUTestResult | read-only | mandatory | Test result for the local line unit (1 - test failed, 0 - success): bit 0 - 2180 DS1 frame sync test (HiGain only) 1 - 2180 DS1 data test (HiGain only) 2 - LIU… |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.4 | ColumnctWanHDSLHRUTestResult | read-only | mandatory | Test results for the remote line unit, Bit definitions correspond to those defined for ctWanHDSLHLUTestResult. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.5 | TablectWanHDSLAlarmsTable | not-accessible | mandatory | This table collects the existing alarms information for the HDSL line, including the local, remote line units and the doublers. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.5.1 | RowctWanHDSLAlarmsEntry | not-accessible | mandatory | Entries for the ctWanHDSL alarms information |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.5.1.1 | ColumnctWanHDSLAlarmsHLUConnIndex | read-only | mandatory | Identify which HDSL connection within the device that the user wants to retrieve the alarm information. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.5.1.2 | ColumnctWanHDSLAlarmsBackplane | read-only | mandatory | Specific information that's related to the HDSL alarms, each bit in the two bytes value has the following meaning if set: Bit 0 : Local Loss of Signal on DS1 l… |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.5.1.3 | ColumnctWanHDSLAlarmsES | read-only | mandatory | A two bytes value for the Errored Second indication of the HDSL line unit, including local, remote line units and the doublers. each bit in the two bytes value… |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6 | TablectWanHDSLAlarmHistoryTable | not-accessible | mandatory | HDSL Alarm History table. This table provides the accumulated counts of Errored Seconds (ES) and Loss of Sync words (LOS) as well as the time stamp of the abov… |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1 | RowctWanHDSLAlarmHistoryEntry | not-accessible | mandatory | Entries in the Alarm History table |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.1 | ColumnctWanHDSLAlarmHistoryConnIndex | read-only | mandatory | Defines which HDSL connection's alarm history within the device. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.2 | ColumnctWanHDSLAlHistLLOSFirst | read-only | mandatory | Time stamp of the first time the DS1 Loss Of Signal (LOS) occurred on the local side of the HDSL. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.3 | ColumnctWanHDSLAlHistLLOSLast | read-only | mandatory | Time stamp of the last time the DS1 Loss Of Signal (LOS) occurred on the local side of the HDSL. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.4 | ColumnctWanHDSLAlHistLLOSCurrent | read-only | mandatory | Set if the DS1 Loss Of Signal (LOS) still occurred on the local side of the HDSL. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.5 | ColumnctWanHDSLAlHistLLOSCount | read-only | mandatory | Number of times the DS1 Loss Of Signal (LOS) occurred since we last cleared the alarm history on the local side of the HDSL. (HiGain only) |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.6 | ColumnctWanHDSLAlHistRLOSFirst | read-only | mandatory | Time stamp of the first time the DS1 Loss Of Signal (LOS) occurred on the remote side of the HDSL. (HiGain only) |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.7 | ColumnctWanHDSLAlHistRLOSLast | read-only | mandatory | Time stamp of the last time the DS1 Loss Of Signal (LOS) occurred on the remote side of the HDSL. (HiGain only) |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.8 | ColumnctWanHDSLAlHistRLOSCurrent | read-only | mandatory | Set if the DS1 Loss Of Signal (LOS) still occurred on the remote site of the HDSL. (HiGain only) |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.9 | ColumnctWanHDSLAlHistRLOSCount | read-only | mandatory | Number of times the DS1 Loss Of Signal (LOS) occurred since we last cleared the alarm history on the remote site of the HDSL. (HiGain only) |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.10 | ColumnctWanHDSLAlHistLOSW1First | read-only | mandatory | Time stamp of the first time the Loss Of Sync Word (LOSW) occurred on the LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.11 | ColumnctWanHDSLAlHistLOSW1Last | read-only | mandatory | Time stamp of the last time the Loss Of Sync Word (LOSW) occurred on the LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.12 | ColumnctWanHDSLAlHistLOSW1Current | read-only | mandatory | Set if the Loss Of Sync Word (LOSW) still occurred on the LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.13 | ColumnctWanHDSLAlHistLOSW1Count | read-only | mandatory | Number of times the Loss Of Sync Word (LOSW) occurred since we last cleared the history on the LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.14 | ColumnctWanHDSLAlHistLOSW2First | read-only | mandatory | Time stamp of the first time the Loss Of Sync Word (LOSW) occurred on the LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.15 | ColumnctWanHDSLAlHistLOSW2Last | read-only | mandatory | Time stamp of the last time the Loss Of Sync Word (LOSW) occurred on the LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.16 | ColumnctWanHDSLAlHistLOSW2Current | read-only | mandatory | Set if the Loss Of Sync Word (LOSW) still occurred on the LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.17 | ColumnctWanHDSLAlHistLOSW2Count | read-only | mandatory | Number of times the Loss Of Sync Word (LOSW) occurred since we last cleared the history on the LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.18 | ColumnctWanHDSLAlHistES1First | read-only | mandatory | Time stamp of the first time the Errored Seconds (ES) occurred on the LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.19 | ColumnctWanHDSLAlHistES1Last | read-only | mandatory | Time stamp of the last time the Errored Seconds (ES) occurred on the LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.20 | ColumnctWanHDSLAlHistES1Current | read-only | mandatory | Set if the Errored Seconds (ES) still occurred on the LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.21 | ColumnctWanHDSLAlHistES1Count | read-only | mandatory | Number of times the Errored Seconds (ES) occurred since we last cleared the alarm history on the LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.22 | ColumnctWanHDSLAlHistES2First | read-only | mandatory | Time stamp of the first time the Errored Seconds (ES) occurred on the LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.23 | ColumnctWanHDSLAlHistES2Last | read-only | mandatory | Time stamp of the last time the Errored Seconds (ES) occurred on the LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.24 | ColumnctWanHDSLAlHistES2Current | read-only | mandatory | Set if the Errored Seconds (ES) still occurred on the LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.25 | ColumnctWanHDSLAlHistES2Count | read-only | mandatory | Number of times the Errored Seconds (ES) occurred since we last cleared the history on the LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.26 | ColumnctWanHDSLAlHistMargin1First | read-only | mandatory | Time stamp of the first time the alarms exceeded the Margin Threshold on LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.27 | ColumnctWanHDSLAlHistMargin1Last | read-only | mandatory | Time stamp of the last time the alarms exceeded the Margin Threshold on the LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.28 | ColumnctWanHDSLAlHistMargin1Current | read-only | mandatory | Set if the alarms still exceeded the Margin Threshold on the LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.29 | ColumnctWanHDSLAlHistMargin1Count | read-only | mandatory | Number of times the alarm exceeded the Margin Threshold since we last cleared the alarm history on the LOOP 1 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.30 | ColumnctWanHDSLAlHistMargin2First | read-only | mandatory | Time stamp of the first time the alarms exceeded the Margin Threshold on LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.31 | ColumnctWanHDSLAlHistMargin2Last | read-only | mandatory | Time stamp of the last time the alarms exceeded the Margin Threshold on the LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.32 | ColumnctWanHDSLAlHistMargin2Current | read-only | mandatory | Set if the alarms still exceeded the Margin Threshold on the LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.33 | ColumnctWanHDSLAlHistMargin2Count | read-only | mandatory | Number of times the alarm exceeded the Margin Threshold since we last cleared the alarm history on the LOOP 2 of the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.34 | ColumnctWanHDSLAlHistCleared | read-only | mandatory | Time stamp of the time user requested to clear the alarm history. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.35 | ColumnctWanHDSLAlHistClearit | read-write | mandatory | set to a 1 to clear the alarm history. A read of this value always returns a 1. NOTE: the setting of this object also causes the SNR low value, SNR high value,… |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.7 | TablectWanHDSLLoopbacksTable | not-accessible | mandatory | HDSL Loopback table. This table provides the certain loopback settings for the HDSL link. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.7.1 | RowctWanHDSLLoopbacksEntry | not-accessible | mandatory | Entries in the HDSL Loopback table. |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.7.1.1 | ColumnctWanHDSLLoopbacksHLUConnIndex | read-only | mandatory | Identify the HDSL connection within the device |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.7.1.2 | ColumnctWanHDSLLoopbacksAdminType | read-write | mandatory | This is the requested loopback type for the HDSL. loopbacks setting: 1 : Smartjack - loopback to network at remote line unit. 2 : Loopback to network at local … |
| 1.3.6.1.4.1.52.4.1.2.7.1.8.7.1.3 | ColumnctWanHDSLLoopbacksOperType | read-only | mandatory | This is the operational loopback type for the HDSL. loopbacks setting: 1 : Smartjack - loopback to network at remote line unit. 2 : Loopback to network at loca… |