CYCLADES-ACS5K-CONF-MIB
109 objects
Configuration of ACS5000 products
Imported Objects
| CYCLADES-ACS5K-MIB | cyACS5KMgmt |
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2925.8.2 | IdentitycyACS5KConf | Configuration of ACS5000 products | ||
| 1.3.6.1.4.1.2925.8.2.1 | ScalarcyHostName | read-write | current | The Host Name |
| 1.3.6.1.4.1.2925.8.2.2 | ScalarcyConsoleBanner | read-write | current | The console banner |
| 1.3.6.1.4.1.2925.8.2.3 | ScalarcyMotd | read-write | current | The motd message |
| 1.3.6.1.4.1.2925.8.2.4 | IdentitycyEthItf | current | The configuration of the Ethernet Interface | |
| 1.3.6.1.4.1.2925.8.2.4.1 | ScalarcyEthDhcpc | read-write | current | The ACS can request all of its ethernet parameters to a DHCP server |
| 1.3.6.1.4.1.2925.8.2.4.2 | ScalarcyEthIPaddr | read-write | current | This is the IP address of the Ethernet Interface |
| 1.3.6.1.4.1.2925.8.2.4.3 | ScalarcyEthIPmask | read-write | current | The mask fot the Ethernet network |
| 1.3.6.1.4.1.2925.8.2.4.4 | ScalarcyEthMTU | read-write | current | The Maximum Transmission Unit size, wich determines whether or not packets should be broken up |
| 1.3.6.1.4.1.2925.8.2.4.5 | ScalarcyEthIPaddr2 | read-write | current | The Ethernet secondary IP address |
| 1.3.6.1.4.1.2925.8.2.4.6 | ScalarcyEthIPmask2 | read-write | current | The Ethernet secondary IP mask |
| 1.3.6.1.4.1.2925.8.2.4.7 | ScalarcyEnableIPv4 | read-write | current | This parameter is used to enable or disable the configuration of IPv4 addresses |
| 1.3.6.1.4.1.2925.8.2.4.8 | ScalarcyEnableIPv6 | read-write | current | This parameter is used to enable or disable the configuration of IPv6 addresses |
| 1.3.6.1.4.1.2925.8.2.4.9 | ScalarcyIPv6Method | read-write | current | IPv6 configuration method |
| 1.3.6.1.4.1.2925.8.2.4.10 | ScalarcyDHCPv6Opts | read-write | current | DHCP options for IPv6 |
| 1.3.6.1.4.1.2925.8.2.4.11 | ScalarcyEthIPaddr6 | read-write | current | This is the IPv6 address of the Ethernet Interface |
| 1.3.6.1.4.1.2925.8.2.4.12 | ScalarcyEthPrefix6 | read-write | current | IPv6 network prefix length of the Ethernet Interface |
| 1.3.6.1.4.1.2925.8.2.5 | IdentitycyNameService | current | The Name Service configuration | |
| 1.3.6.1.4.1.2925.8.2.5.1 | ScalarcyResolverOrder | read-write | current | It specifies how host lookups are to be performed. Valid values : empty, 'hosts', 'bind', 'hosts, bind', 'bind, hosts' |
| 1.3.6.1.4.1.2925.8.2.5.2 | ScalarcyMultipleIP | read-write | current | Valid values are ON or OFF. If set to ON, the resolve library will return all valid addresses for a host that appears in the /etc/hosts file, instead of only t… |
| 1.3.6.1.4.1.2925.8.2.5.3 | IdentitycyDNSserv | current | The DNS server configuration | |
| 1.3.6.1.4.1.2925.8.2.5.3.1 | ScalarcyDNSpriserv | read-write | current | Internet Address (in dot notation) of primary name server that the resolver should query. |
| 1.3.6.1.4.1.2925.8.2.5.3.2 | ScalarcyDNSsecserv | read-write | current | Internet Address (in dot notation) of secondary name server that the resolver should query. |
| 1.3.6.1.4.1.2925.8.2.5.3.3 | ScalarcyDNSdomain | read-write | current | Local domain name . |
| 1.3.6.1.4.1.2925.8.2.6 | IdentitycySerialPortConf | current | The PortSlave configuration - pslave.conf file. It configures the all serial ports. | |
| 1.3.6.1.4.1.2925.8.2.6.1 | IdentitycySerialGlobal | current | These parameters have the prefix conf. in the pslave.conf file | |
| 1.3.6.1.4.1.2925.8.2.6.1.1 | ScalarcySerialInclude | read-write | current | File used in centralized management. |
| 1.3.6.1.4.1.2925.8.2.6.1.2 | ScalarcySerialNFS | read-write | current | Remote Network File System where data buffering will be written instead of the default directory '/var/run/DB'. |
| 1.3.6.1.4.1.2925.8.2.6.1.3 | ScalarcySerialLockDir | read-write | current | The lock directory for the ACS. |
| 1.3.6.1.4.1.2925.8.2.6.1.4 | ScalarcySerialRlogin | read-write | current | Location of the rlogin binary that accepts the -i flag. |
| 1.3.6.1.4.1.2925.8.2.6.1.5 | ScalarcySerialPppd | read-write | current | Location of the pppd binary. |
| 1.3.6.1.4.1.2925.8.2.6.1.6 | ScalarcySerialTelnet | read-write | current | Location of the telnet application |
| 1.3.6.1.4.1.2925.8.2.6.1.7 | ScalarcySerialSsh | read-write | current | Location of the ssh application |
| 1.3.6.1.4.1.2925.8.2.6.1.8 | ScalarcySerialLocalLogins | read-write | current | This parameter is only necessary when authentication is being performed for a port. This is useful if the Radius authentication server is down. |
| 1.3.6.1.4.1.2925.8.2.6.1.9 | ScalarcySerialFacility | read-write | current | This value (0-7) is the Local facility sent to the syslog daemon. |
| 1.3.6.1.4.1.2925.8.2.6.1.10 | ScalarcySerialDBFacility | read-write | current | This value (0-7) is the Local facility sent to the syslog daemon with the data when . |
| 1.3.6.1.4.1.2925.8.2.6.1.11 | TablecySerialGroupTable | not-accessible | current | This associates group name and its users |
| 1.3.6.1.4.1.2925.8.2.6.1.11.1 | RowcygroupEntry | not-accessible | current | One particular association between group name and its users |
| 1.3.6.1.4.1.2925.8.2.6.1.11.1.1 | ColumncyGroupIndex | read-only | current | number to identifier the group |
| 1.3.6.1.4.1.2925.8.2.6.1.11.1.2 | ColumncyGroupName | read-write | current | The Group Name |
| 1.3.6.1.4.1.2925.8.2.6.1.11.1.3 | ColumncyGroupUsers | read-write | current | The users names |
| 1.3.6.1.4.1.2925.8.2.6.2 | IdentitycySerialSpec | current | These parameters have the prefix all. or sxx. in the pslave.conf file | |
| 1.3.6.1.4.1.2925.8.2.6.2.1 | TablecySerialPortTable | not-accessible | current | This is the specific configuration to serial port |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1 | RowcysportEntry | not-accessible | current | One particular serial port configuration |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.1 | ColumncySPortNumber | read-only | current | number to identifier the serial port. Value 0 is ALL. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.2 | ColumncySPortTty | read-write | current | The device name for the serial port. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.3 | ColumncySPortName | read-write | current | Alias name given to the server connected to the serial port. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.4 | ColumncySPortSpeed | read-write | current | The speed for serial port. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.5 | ColumncySPortDataSize | read-write | current | The data size for serial port. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.6 | ColumncySPortStopBits | read-write | current | The number of stop bits for serial port. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.7 | ColumncySPortParity | read-write | current | The parity for serial port. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.8 | ColumncySPortFlowCtrl | read-write | current | The flow control for serial port. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.9 | ColumncySPortDTRdelay | read-write | current | This specifies how long (in miliseconds) a DTR signal will be turned off before it is turned on again. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.10 | ColumncySPortDCDCtrl | read-write | current | DCD signal controls the connection request. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.11 | ColumncySPortLogUtmp | read-write | current | ACS update the login records in /var/run/utmp file. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.12 | ColumncySPortLogWtmp | read-write | current | ACS update the login records in /var/run/wtmp file. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.13 | ColumncySPortLogform | read-write | current | This is the format to write login record. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.14 | ColumncySPortAuthtype | read-write | current | Authentication type : . |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.15 | ColumncySPortAuthSrv1 | read-write | current | IP address of the primary authentication server. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.16 | ColumncySPortAccSrv1 | read-write | current | IP address of the primary accounting server. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.17 | ColumncySPortAuthTmo | read-write | current | This is the timeout (in seconds) for authentication query to be answered. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.18 | ColumncySPortAuthRetr | read-write | current | This defines the number of times each server is tried before another is contacted. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.19 | ColumncySPortAuthSrv2 | read-write | current | IP address of the secondary authentication server. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.20 | ColumncySPortAccSrv2 | read-write | current | IP address of the secondary accounting server. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.21 | ColumncySPortAuthSecret | read-write | current | This is the shared secret with authentciation servers. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.22 | ColumncySPortAuthRadP | read-write | current | To accept Radius' user without password. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.23 | ColumncySPortAuthAcc | read-write | current | access restrition on Users. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.24 | ColumncySPortProtocol | read-write | current | Defines the port serial's protocol. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.25 | ColumncySPortRemoteIP | read-write | current | This is the default IP address of the serial port. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.26 | ColumncySPortSocketPort | read-write | current | This defines an alternative labeling system for the serial port. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.27 | ColumncySPortRemHost | read-write | current | The IP address of the host to which the serial port will connect. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.28 | ColumncySPortBanner | read-write | current | This defines the banner. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.29 | ColumncySPortPrompt | read-write | current | This defines the login prompt to the serial port. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.30 | ColumncySPortTermType | read-write | current | This defines the terminal type. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.31 | ColumncySPortAutomUsr | read-write | current | This defines the automatic user. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.32 | ColumncySPortNetMask | read-write | current | The network mask used in dial in connection. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.33 | ColumncySPortPppMtu | read-write | current | The PPP MTU - dial in connection. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.34 | ColumncySPortPppMru | read-write | current | The PPP MRU - dial in connection. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.35 | ColumncySPortPppOptions | read-write | current | The PPP options when ACS autodetects the PPP session . |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.36 | ColumncySPortPppFoption | read-write | current | The PPP forced options when the user has already been authenticated. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.37 | ColumncySPortModemChat | read-write | current | The initchat send to modem connected. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.38 | ColumncySPortSttyCmd | read-write | current | the tty settings after socket connection is established. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.39 | ColumncySPortSockTx | read-write | current | Defines the delay (in miliseconds) before transmission to the Ethernet of data received through a serial port . |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.40 | ColumncySPortSockPoll | read-write | current | Keep-alive timer (miliseconds) to the TCP connection . |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.41 | ColumncySPortSockIdle | read-write | current | The idle timeout in seconds . |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.42 | ColumncySPortDBsize | read-write | current | Maximum size of the data buffering file. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.43 | ColumncySPortDBtime | read-write | current | Timestamp in data buffering. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.44 | ColumncySPortDBmode | read-write | current | Data buffering mode : circ or line |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.45 | ColumncySPortDBsyslog | read-write | current | size of the data buffering send to syslog. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.46 | ColumncySPortDBmenu | read-write | current | Menu of the data buffering. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.47 | ColumncySPortDBalarm | read-write | current | Generating Alarms. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.48 | ColumncySPortSSHbreak | read-write | current | Break sequence - ssh session |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.49 | ColumncySPortSniffSess | read-write | current | Sniff session type |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.50 | ColumncySPortSniffAdm | read-write | current | List of admin users to sniff session |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.51 | ColumncySPortSniffEsc | read-write | current | Escape sequence used in sniff session |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.52 | ColumncySPortSniffMsess | read-write | current | Multiple sniff sessions |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.53 | ColumncySPortTelnetMode | read-write | current | Mode negotiated by client telnet with the server |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.54 | ColumncySPortSysBufSess | read-write | current | Syslog Buffering at all times |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.55 | ColumncySPortLFSuppress | read-write | current | LF suppression in socket_server session |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.56 | ColumncySPortAutoInput | read-write | current | This string is used to auto answer. It's the input string |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.57 | ColumncySPortAutoOutput | read-write | current | This string is used to auto answer. It's the output string |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.58 | ColumncySPortPmType | read-write | current | IPDU type, when the port protocol is configured as IPDU |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.59 | ColumncySPortPmUsers | read-write | current | List of users which can access the IPDU and their respective outlets |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.60 | ColumncySPortPmOutlet | read-write | current | List of <IPDU port>.<outlet> pairs, where the server is connected |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.61 | ColumncySPortPmKey | read-write | current | Hotkey to grant access to the Power Management from a Telnet/SSH session |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.62 | ColumncySPortPmNOutlets | read-write | current | Number of outlets of the IPDU |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.63 | ColumncySPortBreakInterval | read-write | current | The break interval in miliseconds. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.64 | ColumncySPortRemoteIP6 | read-write | current | This is the default IPv6 address of the serial port. |
| 1.3.6.1.4.1.2925.8.2.6.2.1.1.65 | ColumncySPortPrefix6 | read-write | current | Port IP address network prefix length. |