Cabletron-MIB

349 objects

No module-level DESCRIPTION found.

Imported Objects

RFC1155-SMI	Counter enterprises
SNMPv2-SMI	IpAddress OBJECT-TYPE

OID	Name	Access	Status	Description
1.3.6.1.4.1.52	Nodecabletron
1.3.6.1.4.1.52.1	NodecommsDevice
1.3.6.1.4.1.52.1.1	Nodecommon
1.3.6.1.4.1.52.1.1.1	NodecommonRev1
1.3.6.1.4.1.52.1.1.1.1	ScalardeviceType	read-only	mandatory	This object defines the board type for the Management board in the device. (eg. IRBM, IRM). See appendix A for value.
1.3.6.1.4.1.52.1.1.1.2	ScalardeviceName	read-write	mandatory	An ASCII name of the device that this agent manages.
1.3.6.1.4.1.52.1.1.1.3	ScalardeviceIPAddress	read-write	mandatory	The Internet address of this device.
1.3.6.1.4.1.52.1.1.1.4	ScalarcurrentTime	read-write	mandatory	The current time of day as measured by the device
1.3.6.1.4.1.52.1.1.1.5	ScalarcurrentDate	read-write	mandatory	Character representation of the current date
1.3.6.1.4.1.52.1.1.1.6	ScalarmACAddress	read-only	mandatory	The MAC (Ethernet) address of the MMAC. This can also be obtained from address translation MIB. The Instance Identifier for the MAC address is interface number…
1.3.6.1.4.1.52.1.1.2	NodesysOIDs
1.3.6.1.4.1.52.1.1.2.1	NodesysOtherType
1.3.6.1.4.1.52.1.1.2.2	NodesysIRMType
1.3.6.1.4.1.52.1.1.2.2.1	NodesoidIRMSNMP
1.3.6.1.4.1.52.1.1.2.2.2	NodesoidIRBM
1.3.6.1.4.1.52.1.1.2.2.3	NodesoidIRM2
1.3.6.1.4.1.52.1.1.2.3	NodesysRepType
1.3.6.1.4.1.52.1.1.2.3.1	NodesoidMINIMMAC
1.3.6.1.4.1.52.1.1.2.3.2	NodesoidMRXI
1.3.6.1.4.1.52.1.1.2.4	NodesysBDGType
1.3.6.1.4.1.52.1.2	Noderepeater
1.3.6.1.4.1.52.1.2.1	NoderepeaterRev1
1.3.6.1.4.1.52.1.2.1.1	Nodedevice
1.3.6.1.4.1.52.1.2.1.1.2	ScalardeviceMMACType	read-only	mandatory	Indicates the type of MMAC.
1.3.6.1.4.1.52.1.2.1.1.3	ScalardeviceSlots	read-only	mandatory	Number of available device slots in this device, including the IRM slot.
1.3.6.1.4.1.52.1.2.1.1.4	ScalardeviceOccupiedSlots	read-only	mandatory	The slots that contain MIM boards. This field is bit encoded (eg. If a bit is set then that board is present. For example, a value of 3 indicates that there ar…
1.3.6.1.4.1.52.1.2.1.1.5	ScalardevicePortsOn	read-only	mandatory	The number of operating ports on the device.
1.3.6.1.4.1.52.1.2.1.1.6	ScalardeviceTotalPorts	read-only	mandatory	The total number of repeater ports on the MMAC.
1.3.6.1.4.1.52.1.2.1.1.7	ScalardeviceTotalPkts	read-only	mandatory	The number of packets detected on all ports of this device.
1.3.6.1.4.1.52.1.2.1.1.8	ScalardeviceTotalErrors	read-only	mandatory	The sum of all of the errors listed including alignment,CRC, runts, giants, and Out of window collisions.
1.3.6.1.4.1.52.1.2.1.1.9	ScalardeviceTransmitColl	read-only	optional	The number of transmit collisions detected by this MMAC.
1.3.6.1.4.1.52.1.2.1.1.10	ScalardeviceRecColls	read-only	optional	The number of receive collsions detected by this MMAC.
1.3.6.1.4.1.52.1.2.1.1.11	ScalardeviceAlign	read-only	optional	The number of packets with alignement errors detected.
1.3.6.1.4.1.52.1.2.1.1.12	ScalardeviceCRC	read-only	optional	The number of packets with bad CRC detected.
1.3.6.1.4.1.52.1.2.1.1.13	ScalardeviceRunt	read-only	optional	The number of runt frames detected by this device.
1.3.6.1.4.1.52.1.2.1.1.14	ScalardeviceOOWColl	read-only	optional	The number of out-of-window collisions detected by this
1.3.6.1.4.1.52.1.2.1.1.15	ScalardeviceNoResources	read-only	mandatory	The number of No resource condtions detected.
1.3.6.1.4.1.52.1.2.1.1.16	ScalardeviceRecBytes	read-only	optional	The number of bytes detected on the network.
1.3.6.1.4.1.52.1.2.1.1.17	ScalardeviceGiantFrames	read-only	mandatory	The number of longer than 1518 bytes.
1.3.6.1.4.1.52.1.2.1.1.18	ScalardeviceRestart	read-write	mandatory	If this object is set to 0 the device is restarted.
1.3.6.1.4.1.52.1.2.1.1.19	ScalardeviceResetCounter	read-write	mandatory	If this object is set to 0, all of the devices Counters are reset to 0.
1.3.6.1.4.1.52.1.2.1.1.20	ScalardeviceRedundantCts	read-only	mandatory	The number of redundant circuits available for use.
1.3.6.1.4.1.52.1.2.1.1.24	ScalardeviceTimeBase	read-write	mandatory	The number of seconds used as the interval for performing all of the rate alarm checks. The minimum is 10 secs.
1.3.6.1.4.1.52.1.2.1.1.25	ScalardeviceResetRedundancy	read-write	mandatory	Setting this object to a 1 will reset redundancy for the entire box.
1.3.6.1.4.1.52.1.2.1.1.26	ScalardeviceSrcAddrAgingTime	read-write	mandatory	The number of minutes that a source address is not detected before it is removed from the source address table.
1.3.6.1.4.1.52.1.2.1.1.27	ScalardeviceSrcAddrTraps	read-write	mandatory	Controls sending of source address related traps.
1.3.6.1.4.1.52.1.2.1.1.28	ScalardeviceSrcAddrLocked	read-write	mandatory	If this is set to 2, any source addresses that are detected on station ports that are not in the table will cause the port to be turned off.
1.3.6.1.4.1.52.1.2.1.1.29	ScalardeviceEnetBoardMap	read-only	mandatory	The slots that contain Ethernet MIM boards.
1.3.6.1.4.1.52.1.2.1.1.30	ScalardeviceTokenRingBoardMap	read-only	mandatory	The slots that contain Token Ring MIM boards.
1.3.6.1.4.1.52.1.2.1.1.31	ScalardeviceFDDIBoardMap	read-only	mandatory	The slots that contain FDDI MIM boards.
1.3.6.1.4.1.52.1.2.1.2	Nodeboard
1.3.6.1.4.1.52.1.2.1.3	Nodeport
1.3.6.1.4.1.52.1.2.1.7	NodesourceAddr
1.3.6.1.4.1.52.1.2.1.7.1	ScalarsourceAddrBoard	read-only	mandatory	The board number of the port that the supplied source address has been found on.
1.3.6.1.4.1.52.1.2.1.7.2	ScalarsourceAddrPort	read-only	mandatory	The port number of the port that the supplied source address has been found on.
1.3.6.1.4.1.52.1.2.1.8	Noderedundancy
1.3.6.1.4.1.52.1.2.1.8.1	ScalarredundancyPollInterval	read-write	mandatory	The number of seconds between polls for redundancy.
1.3.6.1.4.1.52.1.2.1.8.2	ScalarredundancyTestTod	read-write	mandatory	The time of day at which the redundant circuits should be tested.
1.3.6.1.4.1.52.1.2.1.8.3	ScalarredundancyPerformTest	read-write	mandatory	Test the redundant circuit.
1.3.6.1.4.1.52.1.2.1.8.4	ScalarredundancyCircuitName	read-write	mandatory	The name of the indicated circuit.
1.3.6.1.4.1.52.1.2.1.8.5	ScalarredundancyRetryCount	read-write	mandatory	The number of unanswered polls allowed for the indicated circuit before the current connection is declared bad.
1.3.6.1.4.1.52.1.2.1.8.6	ScalarredundancyNumBPs	read-only	mandatory	The number of board/port combinations associated with the indicated circuit.
1.3.6.1.4.1.52.1.2.1.8.7	ScalarredundancyCircuitBoards	read-only	mandatory	The boards associated with the indicated circuit, accessed by index.
1.3.6.1.4.1.52.1.2.1.8.8	ScalarredundancyCircuitPort	read-only	mandatory	The ports associated with the indicated circuit, accessed by index.
1.3.6.1.4.1.52.1.2.1.8.9	ScalarredundancyCircuitTypes	read-only	mandatory	The type of each port associated with the indicated circuit, accessed by index.
1.3.6.1.4.1.52.1.2.1.8.10	ScalarredundancyCircuitNumAddr	read-only	mandatory	The number of addresses associated with the indicated circuit.
1.3.6.1.4.1.52.1.2.1.8.11	ScalarredundancyCircuitMACAddrAdd	read-write	mandatory	Adds the ethernet address to the polling list for the indicated circuit.
1.3.6.1.4.1.52.1.2.1.8.12	ScalarredundancyCircuitMACAddrDel	read-write	mandatory	Removes the ethernet address from the polling list for the indicated circuit.
1.3.6.1.4.1.52.1.2.1.8.13	ScalarredundancyCircuitMACAddrDisp	read-only	mandatory	The ethernet addresses associated with the indicated circuit, accessed by index.
1.3.6.1.4.1.52.1.2.1.8.14	ScalarredundancyCircuitEnable	read-write	mandatory	Enables and disables the indicated circuit.
1.3.6.1.4.1.52.1.2.1.8.15	ScalarredundancyCircuitReset	read-write	mandatory	Reset the indicated circuit. Return all of the associated board and ports to NOT-USED, remove associated addresses from the polling list, reset the circuit nam…
1.3.6.1.4.1.52.1.2.1.9	Nodealarm
1.3.6.1.4.1.52.1.2.1.9.1	NodedevAlrm
1.3.6.1.4.1.52.1.2.1.9.1.1	NodedevTraffic
1.3.6.1.4.1.52.1.2.1.9.1.1.1	ScalardevTrafficEnable	read-write	mandatory	Enable the sending of device level traffic traps.
1.3.6.1.4.1.52.1.2.1.9.1.1.2	ScalardevTrafficThreshold	read-write	mandatory	The threshold of packets within the devicetimebase that will cause a traffic alarm.
1.3.6.1.4.1.52.1.2.1.9.1.2	NodedevColls
1.3.6.1.4.1.52.1.2.1.9.1.2.1	ScalardevCollsEnable	read-write	mandatory	Enable the sending of device level collsion alarms.
1.3.6.1.4.1.52.1.2.1.9.1.2.2	ScalardevCollsThreshold	read-write	mandatory	This object represents the number of collisions per good packet measured by the device that will generate an alarm. valid values are 1 to 15
1.3.6.1.4.1.52.1.2.1.9.1.3	NodedevError
1.3.6.1.4.1.52.1.2.1.9.1.3.1	ScalardevErrorEnable	read-write	mandatory	Enable the sending of device level error alarms.
1.3.6.1.4.1.52.1.2.1.9.1.3.2	ScalardevErrorThreshold	read-write	mandatory	This object represents the percentage of errors per good packet that will generate an alarm.
1.3.6.1.4.1.52.1.2.1.9.1.3.3	ScalardevErrorSource	read-write	mandatory	The type of error used for the error alarm.
1.3.6.1.4.1.52.1.2.1.9.2	NodebdAlrm
1.3.6.1.4.1.52.1.2.1.9.2.1	NodebdTraffic
1.3.6.1.4.1.52.1.2.1.9.2.1.1	ScalarbdTrafficEnable	read-write	mandatory	Enable the sending of board level traffic traps for this board.
1.3.6.1.4.1.52.1.2.1.9.2.1.2	ScalarbdTrafficThreshold	read-write	mandatory	The threshold of packets within the Devicetimebase that will cause a traffic alarm.
1.3.6.1.4.1.52.1.2.1.9.2.2	NodebdColls
1.3.6.1.4.1.52.1.2.1.9.2.2.1	ScalarbdCollsEnable	read-write	mandatory	Enable the sending of board level collsion alarms.
1.3.6.1.4.1.52.1.2.1.9.2.2.2	ScalarbdCollsThreshold	read-write	mandatory	This object represents the number of collisions per good packet measured by the board that will generate an alarm. valid values are 1 to 15
1.3.6.1.4.1.52.1.2.1.9.2.3	NodebdError
1.3.6.1.4.1.52.1.2.1.9.2.3.1	ScalarbdErrorEnable	read-write	mandatory	Enable the sending of board level error alarms.
1.3.6.1.4.1.52.1.2.1.9.2.3.2	ScalarbdErrorThreshold	read-write	mandatory	This object represents the percentage of errors per good packet that will generate an alarm.
1.3.6.1.4.1.52.1.2.1.9.2.3.3	ScalarbdErrorSource	read-write	mandatory	The type of error used for the error alarm.
1.3.6.1.4.1.52.1.2.1.9.3	NodeportAlrm
1.3.6.1.4.1.52.1.2.1.9.3.1	NodeportTraffic
1.3.6.1.4.1.52.1.2.1.9.3.1.1	ScalarportTrafficEnable	read-write	mandatory	Enable the sending of port level traffic traps for this port.
1.3.6.1.4.1.52.1.2.1.9.3.1.2	ScalarportTrafficThreshold	read-write	mandatory	The threshold of packets within the Devicetimebase that will cause a traffic alarm.
1.3.6.1.4.1.52.1.2.1.9.3.2	NodeportColls
1.3.6.1.4.1.52.1.2.1.9.3.2.1	ScalarportCollsEnable	read-write	mandatory	Enable the sending of port level collsion alarms.
1.3.6.1.4.1.52.1.2.1.9.3.2.2	ScalarportCollsThreshold	read-write	mandatory	This object represents the number of collisions per good packet measured by the port that will generate an alarm.
1.3.6.1.4.1.52.1.2.1.9.3.3	NodeportError
1.3.6.1.4.1.52.1.2.1.9.3.3.1	ScalarportErrorEnable	read-write	mandatory	Enable the sending of port level error alarms.
1.3.6.1.4.1.52.1.2.1.9.3.3.2	ScalarportErrorThreshold	read-write	mandatory	This object represents the percentage of errors per good packet that will generate an alarm.
1.3.6.1.4.1.52.1.2.1.9.3.3.3	ScalarportErrorSource	read-write	mandatory	The type of error used for the error alarm.
1.3.6.1.4.1.52.1.2.2	NoderepeaterRev2
1.3.6.1.4.1.52.1.2.2.1	Noderr2device
1.3.6.1.4.1.52.1.2.2.1.1	NodecommonD
1.3.6.1.4.1.52.1.2.2.1.2	NodeethernetD
1.3.6.1.4.1.52.1.2.2.1.3	NodetokenRingD
1.3.6.1.4.1.52.1.2.2.1.3.1	ScalardeviceTRTokenRingPortsOn	read-only	mandatory	The number of Token Ring Ports (i.e. station, Ring In and Ring Out ports) enabled on this device.
1.3.6.1.4.1.52.1.2.2.1.3.2	ScalardeviceTRTotalTokenRingPorts	read-only	mandatory	The total number of Token Ring Ports (i.e. station, Ring In and Ring Out ports) on this device.
1.3.6.1.4.1.52.1.2.2.1.3.3	ScalardeviceTRTotalTokenRingRingPortsOn	read-only	mandatory	The total number of Ring In and Ring Out ports (active) enabled on this device.
1.3.6.1.4.1.52.1.2.2.1.3.4	ScalardeviceTRTotalTokenRingRingPorts	read-only	mandatory	The total number of Ring In and Ring Out ports on this device.
1.3.6.1.4.1.52.1.2.2.1.3.5	ScalardeviceTRTotalTokenRingRings	read-only	mandatory	The total number of (Token Ring) rings formed on this device.
1.3.6.1.4.1.52.1.2.2.2	Nodenetwork
1.3.6.1.4.1.52.1.2.2.3	Noderr2board
1.3.6.1.4.1.52.1.2.2.3.1	NodecommonB
1.3.6.1.4.1.52.1.2.2.3.1.1	ScalarboardIndex	read-only	mandatory	The slot number of this board.
1.3.6.1.4.1.52.1.2.2.3.1.2	ScalarboardName	read-write	mandatory	The name of the board. This field will only contain printable ASCII characters.
1.3.6.1.4.1.52.1.2.2.3.1.3	ScalarboardType	read-only	mandatory	The type of the MIM. (eg. FOT, TPT, etc). See appendix A for encoding.
1.3.6.1.4.1.52.1.2.2.3.1.4	ScalarboardTotalPorts	read-only	mandatory	Total number of ports supported on this board.
1.3.6.1.4.1.52.1.2.2.3.1.5	ScalarboardSTATUS	read-write	optional	The administrative status of this MIM.
1.3.6.1.4.1.52.1.2.2.3.1.6	ScalarboardPortsOn	read-only	mandatory	The number of operating ports on the board.
1.3.6.1.4.1.52.1.2.2.3.2	NodeethernetB
1.3.6.1.4.1.52.1.2.2.3.2.1	ScalarboardTotalPkts	read-only	mandatory	The total number of packets this board has seen since the last reset.
1.3.6.1.4.1.52.1.2.2.3.2.2	ScalarboardErrorPkts	read-only	mandatory	The number of packets that have experienced an error. VAlid only on the IRBM, IRM2, and MiniMMAC.
1.3.6.1.4.1.52.1.2.2.3.2.3	ScalarboardTransColl	read-only	optional	The number of transmit collisions this board has detected.
1.3.6.1.4.1.52.1.2.2.3.2.4	ScalarboardRecColl	read-only	optional	The number of Receive mode collisions this board has detected.
1.3.6.1.4.1.52.1.2.2.3.2.5	ScalarboardAlign	read-only	optional	The number of mis-aligned frames this board has detected. Only valid for the IRBM, IRM2, and MiniMMAC.
1.3.6.1.4.1.52.1.2.2.3.2.6	ScalarboardCRC	read-only	optional	The number of packets with bad CRC detected. Only valid on IRBM, IRM2, and MiniMMAC.
1.3.6.1.4.1.52.1.2.2.3.2.7	ScalarboardRunt	read-only	optional	The number of runt frames detected by this board. Valid fr the IRBM, IRM2, and MiniMMAC only.
1.3.6.1.4.1.52.1.2.2.3.2.8	ScalarboardOOWColl	read-only	optional	The number of out-of-window collisions detected by this board. Only valid on the IRBM, IRM2, and MiniMMAC.
1.3.6.1.4.1.52.1.2.2.3.2.9	ScalarboardNoResources	read-only	optional	The number of times The no resources condition was detected for this board.
1.3.6.1.4.1.52.1.2.2.3.2.10	ScalarboardRecBytes	read-only	optional	The number of bytes detected on the network. Valid only on the IRBM, IRM2, and MiniMMAC.
1.3.6.1.4.1.52.1.2.2.3.2.11	ScalarboardGiants	read-only	mandatory	The number of packets longer than 1518 bytes detected on this board.
1.3.6.1.4.1.52.1.2.2.3.3	NodetokenRingB
1.3.6.1.4.1.52.1.2.2.3.3.1	ScalarboardTotalRingPorts	read-only	mandatory	The total number of ring ports on this board. Currently, zero or two.
1.3.6.1.4.1.52.1.2.2.3.3.2	ScalarboardTotalStationPorts	read-only	mandatory	The total number of station ports on this board.
1.3.6.1.4.1.52.1.2.2.3.3.3	ScalarboardModeStatus	read-write	mandatory	The board is configured for 2 == Auto Mode or 1 == Management Mode
1.3.6.1.4.1.52.1.2.2.3.3.4	ScalarboardTotalRingPortsOn	read-only	mandatory	The number of enabled ring ports on this board.
1.3.6.1.4.1.52.1.2.2.3.3.5	ScalarboardTotalStationPortsOn	read-only	mandatory	The number of enabled station ports on this board.
1.3.6.1.4.1.52.1.2.2.3.3.6	ScalarboardSpeed	read-write	mandatory	Speed 4 == 4 Mhz Speed 16 == 16 Mhz
1.3.6.1.4.1.52.1.2.2.3.3.7	ScalarboardRingSpeedFault	read-only	mandatory	Data speed of station mismatches configuration speed of board. board is automatically bypassed.
1.3.6.1.4.1.52.1.2.2.3.4	NodefddiB
1.3.6.1.4.1.52.1.2.2.4	Noderr2port
1.3.6.1.4.1.52.1.2.2.4.1	NodecommonP
1.3.6.1.4.1.52.1.2.2.4.1.1	ScalarportIndex	read-only	mandatory	The slot number of this port.
1.3.6.1.4.1.52.1.2.2.4.1.2	ScalarportMediaType	read-only	mandatory	The type of the port. (eg. FOT, TPT, etc). See appendix A for values.
1.3.6.1.4.1.52.1.2.2.4.1.3	ScalarportAdminState	read-write	mandatory	The administrative status of this port.
1.3.6.1.4.1.52.1.2.2.4.1.4	ScalarportSourceAddr	read-only	mandatory	A source address that has been seen on this port.
1.3.6.1.4.1.52.1.2.2.4.2	NodeethernetP
1.3.6.1.4.1.52.1.2.2.4.2.1	ScalarportTopologyType	read-only	mandatory	The topological type of the port. { Station(1) Link(2) }
1.3.6.1.4.1.52.1.2.2.4.2.2	ScalarportLinkStatus	read-only	mandatory	The state of the link signal for this port
1.3.6.1.4.1.52.1.2.2.4.2.3	ScalarportStatus	read-only	mandatory
1.3.6.1.4.1.52.1.2.2.4.2.4	ScalarportTotalPkts	read-only	mandatory	The total number of packets this port has seen since the last reset.
1.3.6.1.4.1.52.1.2.2.4.2.5	ScalarportErrorPkts	read-only	mandatory	The number of packets that have experienced an error. Valid only on the IRBM, IRM2, and MiniMMAC
1.3.6.1.4.1.52.1.2.2.4.2.6	ScalarportXmitColls	read-only	optional	The number of Transmit mode collisions this port has detected. Only valid on IRBM, IRM2, and MiniMMAC.
1.3.6.1.4.1.52.1.2.2.4.2.7	ScalarportRecColls	read-only	optional	The number of Receive mode collisions this port has detected. Only valid on IRBM, IRM2, and MiniMMAC.
1.3.6.1.4.1.52.1.2.2.4.2.8	ScalarportAlign	read-only	optional	The number of mis-aligned frames this port has detected. Only valid for the IRBM, IRM2, and MiniMMAC.
1.3.6.1.4.1.52.1.2.2.4.2.9	ScalarportCRC	read-only	optional	The number of packets with bad CRC detected. Only valid on IRBM, IRM2, and MiniMMAC.
1.3.6.1.4.1.52.1.2.2.4.2.10	ScalarportRunt	read-only	optional	The number of runt frames detected by this port. Valid for the IRBM, IRM2, and MiniMMAC only.
1.3.6.1.4.1.52.1.2.2.4.2.11	ScalarportOOWColl	read-only	optional	The number of out-of-window collisions detected by this port. Only valid on the IRBM, IRM2, and MiniMMAC.
1.3.6.1.4.1.52.1.2.2.4.2.12	ScalarportNoResorces	read-only	optional	The number of times the no resource condition is detected on this port.
1.3.6.1.4.1.52.1.2.2.4.2.13	ScalarportRecBytes	read-only	optional	The number of bytes detected on the network. Valid only on the IRBM, IRM2, and MiniMMAC.
1.3.6.1.4.1.52.1.2.2.4.2.14	ScalarportGiants	read-only	optional	The number of frames longer than 1518 bytes detected on this port.
1.3.6.1.4.1.52.1.2.2.4.2.15	ScalarportRedundCrt	read-write	mandatory	The redundant circuit with which this port is associated.
1.3.6.1.4.1.52.1.2.2.4.2.16	ScalarportRedundType	read-write	mandatory	The type of port this port is in the redundant circuit.
1.3.6.1.4.1.52.1.2.2.4.2.17	ScalarportRedundStatus	read-write	mandatory	The current state of this port is in the redundant circuit.
1.3.6.1.4.1.52.1.2.2.4.2.18	ScalarportForceLinkType	read-write	mandatory	This variable forces a port to be a link port.
1.3.6.1.4.1.52.1.2.2.4.3	NodetokenRingP
1.3.6.1.4.1.52.1.2.2.4.3.1	NodestationP
1.3.6.1.4.1.52.1.2.2.4.3.1.1	ScalarstationPortLinkStatus	read-only	mandatory	When station is supplying phantom current the Link Signal is active. When there is no phantom current the Link Signal is inactive.
1.3.6.1.4.1.52.1.2.2.4.3.1.2	ScalarstationPortLinkStateTime	read-write	mandatory	The amount of time (in seconds) elapsed since the station port last changed state.
1.3.6.1.4.1.52.1.2.2.4.3.2	NoderingP
1.3.6.1.4.1.52.1.2.2.4.3.2.1	ScalarringPortLinkStatus	read-only	mandatory	Off (wrapped). On (active).
1.3.6.1.4.1.52.1.2.2.4.3.2.2	ScalarringPortLinkStateTime	read-write	mandatory	The amount of time (in seconds) elapsed since ring port last changed state.
1.3.6.1.4.1.52.1.2.2.4.4	NodefddiP
1.3.6.1.4.1.52.1.2.2.5	NoderepeaterTables
1.3.6.1.4.1.52.1.3	Nodebridge
1.3.6.1.4.1.52.1.3.1	NodebridgeRev1
1.3.6.1.4.1.52.1.3.1.1	Nodebdgdevice
1.3.6.1.4.1.52.1.3.1.1.1	ScalarbdgdeviceDisableBdg	read-write	mandatory	Indicates if the bridge will be disabled.
1.3.6.1.4.1.52.1.3.1.1.2	ScalarbdgdeviceRestoreSettings	read-write	mandatory	Restore the following settings to their default values: Bridge Name to ETHERNET_BRIDGE, Location to LOCAL, Port 1 Name to PORT_1, Port 2 Name to PORT_2, Port 1…
1.3.6.1.4.1.52.1.3.1.1.4	ScalarbdgdeviceBdgName	read-write	mandatory	The user-defined name (up to 32 characters long) of the bridge. The default bridge name is ETHERNET_BRIDGE.
1.3.6.1.4.1.52.1.3.1.1.5	ScalarbdgdeviceNumPorts	read-only	mandatory	The number of ports present on the bridge.
1.3.6.1.4.1.52.1.3.1.1.6	ScalarbdgdeviceType	read-only	mandatory	The type of bridge, NB25E, IRBM, or NB20E.
1.3.6.1.4.1.52.1.3.1.1.7	ScalarbdgdeviceVersion	read-only	mandatory	The release version of the firmware installed in the bridge.
1.3.6.1.4.1.52.1.3.1.1.8	ScalarbdgdeviceLocation	read-write	mandatory	The user-defined name to indicate the location of the bridge on the network. The default location name is LOCAL.
1.3.6.1.4.1.52.1.3.1.1.9	ScalarbdgdeviceStatus	read-only	mandatory	The status of the bridge, ON-LINE, STAND BY or DISABLED.
1.3.6.1.4.1.52.1.3.1.1.10	ScalarbdgdeviceRestartBdg	read-write	mandatory	Force the bridge to undergo a software reset.
1.3.6.1.4.1.52.1.3.1.1.11	ScalarbdgdeviceFrFwd	read-only	mandatory	The number of frames forwarded by the bridge.
1.3.6.1.4.1.52.1.3.1.1.12	ScalarbdgdeviceFrRx	read-only	mandatory	The number of frames received by the bridge.
1.3.6.1.4.1.52.1.3.1.1.13	ScalarbdgdeviceFrFlt	read-only	mandatory	The number of frames filtered by the bridge.
1.3.6.1.4.1.52.1.3.1.1.14	ScalarbdgdeviceErr	read-only	mandatory	The total number of network errors that have occurred.
1.3.6.1.4.1.52.1.3.1.1.15	ScalarbdgdeviceSwitchSetting	read-only	mandatory	Indicates the current switch settings read from the bridge hardware.
1.3.6.1.4.1.52.1.3.1.1.16	ScalarbdgdeviceNumRestarts	read-only	mandatory	The number of times the bridge has been powered up or restarted.
1.3.6.1.4.1.52.1.3.1.1.17	ScalarbdgdeviceTypeFiltering	read-write	mandatory	The type of filtering to be performed by the bridge. The default is IEEE 802.1.
1.3.6.1.4.1.52.1.3.1.1.18	ScalarbdgdeviceSTAProtocol	read-write	mandatory	The spanning tree algorithm under which the bridge is operating. The selections are as follows: - IEEE 802.1 compliant spanning tree algorithm environment (802…
1.3.6.1.4.1.52.1.3.1.1.19	ScalarbdgdeviceBridgeID	read-only	mandatory	The unique identifier of the bridge. The first two bytes of the identifier are the bridge priority and the last six bytes are the Ethernet address.
1.3.6.1.4.1.52.1.3.1.1.20	ScalarbdgdeviceTopChgCnt	read-only	mandatory	The number of times the bridge's Topology Change Flag has been changed since the bridge was powered up or initialized.
1.3.6.1.4.1.52.1.3.1.1.21	ScalarbdgdeviceRootCost	read-only	mandatory	The cost of the path to the root from this bridge.
1.3.6.1.4.1.52.1.3.1.1.22	ScalarbdgdeviceRootPort	read-only	mandatory	The port identifier for the port which offers the lowest cost path to the root, i.e. that port for which the sum of the values of the designated cost and path …
1.3.6.1.4.1.52.1.3.1.1.23	ScalarbdgdeviceHelloTime	read-only	mandatory	The time interval between the transmission of Configuration BPDU's by a bridge which is attempting to become the root or is the root.
1.3.6.1.4.1.52.1.3.1.1.24	ScalarbdgdeviceBdgMaxAge	read-write	mandatory	The value of the Max Age parameter when the bridge is the root or is attempting to become the root. A time of 6 to 40 seconds is allowed. The default is 20 sec…
1.3.6.1.4.1.52.1.3.1.1.25	ScalarbdgdeviceBdgFwdDly	read-write	mandatory	The value of the forward delay parameter when the bridge is the root or is attempting to become the root. A time of 4 to 30 seconds is allowed.
1.3.6.1.4.1.52.1.3.1.1.26	ScalarbdgdeviceTimeTopChg	read-only	mandatory	The time in seconds that has elapsed since the bridge's Topology Change Flag last recorded the value of a topology change.
1.3.6.1.4.1.52.1.3.1.1.27	ScalarbdgdeviceTopChg	read-only	mandatory	Indicates if a bridge topology change is in progress.
1.3.6.1.4.1.52.1.3.1.1.28	ScalarbdgdeviceDesigRoot	read-only	mandatory	The unique identifier of the bridge recorded as the root.
1.3.6.1.4.1.52.1.3.1.1.29	ScalarbdgdeviceMaxAge	read-only	mandatory	The maximum age of received protocol information before it is discarded.
1.3.6.1.4.1.52.1.3.1.1.30	ScalarbdgdeviceHoldTime	read-only	mandatory	The minimum time period elapsing between the transmission of configuration BPDU's through a given bridge port.
1.3.6.1.4.1.52.1.3.1.1.31	ScalarbdgdeviceFwdDly	read-only	mandatory	The time spent in the listening state while moving from the blocking state to the learning state, or the time spent in the learning state while moving from the…
1.3.6.1.4.1.52.1.3.1.1.32	ScalarbdgdeviceBdgHello	read-write	mandatory	The value of the Hello Time parameter when the bridge is the root or is attempting to become the root. A time of 1 to 10 seconds is allowed. The default is 2 s…
1.3.6.1.4.1.52.1.3.1.1.33	ScalarbdgdeviceBdgPriority	read-write	mandatory	The part of the bridge address that contains the identifier used in the spanning tree for priority comparisons. Allowed range is 0 through FFFF. The default is…
1.3.6.1.4.1.52.1.3.1.1.34	ScalarbdgdeviceResetCounts	read-write	mandatory	Reset all counters to zero.
1.3.6.1.4.1.52.1.3.1.1.35	ScalarbdgdeviceUptime	read-only	mandatory	The time, in seconds, that has elapsed since the bridge was last reset or initialized.
1.3.6.1.4.1.52.1.3.1.1.36	ScalarbdgdeviceTrapType	read-only	mandatory	Contains the object identifier of the first VarBinding in the last trap generated by the bridge.
1.3.6.1.4.1.52.1.3.1.2	NodebdgPort
1.3.6.1.4.1.52.1.3.1.2.1	ScalarbdgPortAddress	read-only	mandatory	The Ethernet address of the port.
1.3.6.1.4.1.52.1.3.1.2.2	ScalarbdgPortName	read-write	mandatory	The user-defined name assigned to the port. The default port 1 name is PORT_1 and the default Port 2 name is PORT_2.
1.3.6.1.4.1.52.1.3.1.2.3	ScalarbdgPortType	read-only	mandatory	The IEEE specification the port meets, e.g. 802.3.
1.3.6.1.4.1.52.1.3.1.2.4	ScalarbdgPortStatus	read-only	mandatory	The status in which the port is operating. The status messages for Ports 1 and 2 are: OFF - The port is off, due to a failed network interface chip associated …
1.3.6.1.4.1.52.1.3.1.2.5	ScalarbdgPortNetName	read-write	mandatory	The user-defined name assigned to a network segment connected to the port. The default network name for Port 1 is LAN_1 and the default network name for Port 2…
1.3.6.1.4.1.52.1.3.1.2.6	ScalarbdgPortFrRx	read-only	mandatory	The number of frames received at the specified port.
1.3.6.1.4.1.52.1.3.1.2.7	ScalarbdgPortDisInb	read-only	mandatory	The total number of valid frames that were received at the port but then discarded by the bridge in the forwarding process.
1.3.6.1.4.1.52.1.3.1.2.8	ScalarbdgPortFwdOutb	read-only	mandatory	The number of frames forwarded successfully to the appropriate port.
1.3.6.1.4.1.52.1.3.1.2.9	ScalarbdgPortDisLOB	read-only	mandatory	The number of packets that were discarded by the bridge because of a lack of buffer space to maintain the data.
1.3.6.1.4.1.52.1.3.1.2.10	ScalarbdgPortDisTDE	read-only	mandatory	The number of frames that were intended for forwarding but were discarded when the maximum time period set for transmission was exceeded before forwarding was …
1.3.6.1.4.1.52.1.3.1.2.11	ScalarbdgPortDisErr	read-only	mandatory	The number of frames that could not be transmitted because the frame was too large for the attached network (1526 bytes, including preamble, for 802.3 networks…
1.3.6.1.4.1.52.1.3.1.2.12	ScalarbdgPortColl	read-only	mandatory	The number of collisions that have occurred on the network at the specified port.
1.3.6.1.4.1.52.1.3.1.2.13	ScalarbdgPortTxAbrt	read-only	mandatory	The number of transmissions that have been aborted due to excessive collisions (over 16 attempts to transmit the same packet).
1.3.6.1.4.1.52.1.3.1.2.14	ScalarbdgPortOowColl	read-only	mandatory	The number of collisions out of the standard collision window (51.2 uS). This indicates a network problem.
1.3.6.1.4.1.52.1.3.1.2.15	ScalarbdgPortCRCErr	read-only	mandatory	The number of packets detected with Cyclical Redundancy Check failures.
1.3.6.1.4.1.52.1.3.1.2.16	ScalarbdgPortFrAlErr	read-only	mandatory	The number of errors due to misaligned packets.
1.3.6.1.4.1.52.1.3.1.2.17	ScalarbdgPortPriority	read-write	mandatory	The part of the port identifier which is used with the spanning tree algorithm when determining which port in a LAN segment has priority. The default is 80.
1.3.6.1.4.1.52.1.3.1.2.18	ScalarbdgPortState	read-only	mandatory	The current state of the port, DISABLED, LISTENING, LEARNING, FORWARDING or BLOCKING.
1.3.6.1.4.1.52.1.3.1.2.19	ScalarbdgPortPathCost	read-write	mandatory	The contributory cost of the applicable port to the overall cost of the path when the specified port is the root port. Allowable range is 1 to 65535. The defau…
1.3.6.1.4.1.52.1.3.1.2.20	ScalarbdgPortDesigCost	read-only	mandatory	The cost of the path of this port to the root bridge on the network.
1.3.6.1.4.1.52.1.3.1.2.21	ScalarbdgPortDesigBrdg	read-only	mandatory	The network address of the bridge that is assumed to be the root bridge on the network.
1.3.6.1.4.1.52.1.3.1.2.22	ScalarbdgPortDesigPort	read-only	mandatory	The port identifier of the bridge port believed to be the designated port for the LAN associated with the port.
1.3.6.1.4.1.52.1.3.1.2.23	ScalarbdgPortTopChgAck	read-only	mandatory	The value of the topology change acknowledgement flag in the next configuration BPDU to be transmitted on the associated port.
1.3.6.1.4.1.52.1.3.1.2.24	ScalarbdgPortDesigRoot	read-only	mandatory	The unique bridge identifier of the bridge that is assumed to be the root bridge on the network.
1.3.6.1.4.1.52.1.3.1.2.25	ScalarbdgPortRuntPackets	read-only	mandatory	The number of packets received at the indicated bdgPort that were less than the IEEE 802.3 minimum Ethernet frame size of 64 bytes.
1.3.6.1.4.1.52.1.3.1.2.26	ScalarbdgPortOversizePackets	read-only	mandatory	The number of packets received at the indicated port that were greater than the IEEE 802.3 maximum Ethernet frame size of 1518 bytes.
1.3.6.1.4.1.52.1.3.1.2.27	ScalarbdgPortFrFilt	read-only	mandatory	The number of frames received at the indicated port that were filtered by the bridge.
1.3.6.1.4.1.52.1.3.1.3	NodefilterDB
1.3.6.1.4.1.52.1.3.1.3.1	NodeacqDB
1.3.6.1.4.1.52.1.3.1.3.1.1	NodeacqStats
1.3.6.1.4.1.52.1.3.1.3.1.1.1	ScalaracqTotalEntries	read-only	mandatory	The total number of entries in the acquired database.
1.3.6.1.4.1.52.1.3.1.3.1.1.2	ScalaracqMaxEntries	read-only	mandatory	The maximum number of entries allowed in the acquired database.
1.3.6.1.4.1.52.1.3.1.3.1.1.3	ScalaracqStaticEntries	read-only	mandatory	The number of addresses added to the Acquired database by the user or network manager.
1.3.6.1.4.1.52.1.3.1.3.1.1.4	ScalaracqStaticAgeTime	read-only	mandatory	The length of time allowed for a static entry in the Acquired database to be inactive before it is dropped from the database. This time is fixed at zero.
1.3.6.1.4.1.52.1.3.1.3.1.1.5	ScalaracqDynEntries	read-only	mandatory	The number of entries that have been accumulated in the Acquired database through the bridge's learning process.
1.3.6.1.4.1.52.1.3.1.3.1.1.6	ScalaracqDynAgeTime	read-write	mandatory	The length of time allowed for a dynamic entry in the acquired database to be inactive before it is dropped from the database. A time from 10 - 1,000,000 secon…
1.3.6.1.4.1.52.1.3.1.3.1.1.7	ScalaracqEraseDatabase	read-write	mandatory	Set to zero to erase all entries in the acquired database.
1.3.6.1.4.1.52.1.3.1.3.1.2	NodeacqOptions
1.3.6.1.4.1.52.1.3.1.3.1.2.1	ScalaracqCreate00	read-write	mandatory	Add an entry to the acquired database to filter packets entering ports 1 and 2 if those packets are destined for the specified address.
1.3.6.1.4.1.52.1.3.1.3.1.2.2	ScalaracqCreate20	read-write	mandatory	Add an entry to the acquired database to forward packets entering port1 to port2 and filter packets entering port2 if those packets are destined for the specif…
1.3.6.1.4.1.52.1.3.1.3.1.2.3	ScalaracqCreate01	read-write	mandatory	Add an entry to the acquired database to filter packets entering port 1 and forward packets entering port 2 to port 1 if those packets are destined for the spe…
1.3.6.1.4.1.52.1.3.1.3.1.2.4	ScalaracqCreate21	read-write	mandatory	Add an entry to the acquired database to forward packets entering port 1 to port 2 and to forward packets entering port 2 to port 1 if those packets are destin…
1.3.6.1.4.1.52.1.3.1.3.1.2.5	ScalaracqDelete	read-write	mandatory	Delete an entry from the acquired database.
1.3.6.1.4.1.52.1.3.1.3.1.2.6	ScalaracqDispType	read-only	mandatory	Display the entry type, STATIC or DYNAMIC.
1.3.6.1.4.1.52.1.3.1.3.1.2.7	ScalaracqDispOutp1	read-only	mandatory	The outbound port for packets entering port 1.
1.3.6.1.4.1.52.1.3.1.3.1.2.8	ScalaracqDispOutp2	read-only	mandatory	The outbound port for packets entering port 2.
1.3.6.1.4.1.52.1.3.1.3.1.2.9	ScalaracqSrcAddress	read-only	mandatory	The source address of this acquired database entry, i.e. the instance.
1.3.6.1.4.1.52.1.3.1.3.2	NodepermDB
1.3.6.1.4.1.52.1.3.1.3.2.1	NodepermStats
1.3.6.1.4.1.52.1.3.1.3.2.1.1	ScalarpermMaxEntries	read-only	mandatory	The maximum number of entries allowed in the permanent database.
1.3.6.1.4.1.52.1.3.1.3.2.1.2	ScalarpermCurrEntries	read-only	mandatory	The number of entries currently recorded in the bridge's permanent database.
1.3.6.1.4.1.52.1.3.1.3.2.1.3	ScalarpermEraseDatabase	read-write	mandatory	Erase all entries in the permanent database.
1.3.6.1.4.1.52.1.3.1.3.2.2	NodepermOptions
1.3.6.1.4.1.52.1.3.1.3.2.2.1	ScalarpermCreate00	read-write	mandatory	Add an entry to the permanent database to filter packets entering ports 1 and 2 if those packets are destined for the specified address.
1.3.6.1.4.1.52.1.3.1.3.2.2.2	ScalarpermCreate20	read-write	mandatory	Add an entry to the permanent database to forward packets entering port 1 and filter packets entering port 2 if those packets are destined for the specified ad…
1.3.6.1.4.1.52.1.3.1.3.2.2.3	ScalarpermCreate01	read-write	mandatory	Add an entry to the permanent database to filter packets entering port 1 and forward packets entering port 2 if those packets are destined for the specified ad…
1.3.6.1.4.1.52.1.3.1.3.2.2.4	ScalarpermCreate21	read-write	mandatory	Add an entry to the permanent database to forward packets entering ports 1 and 2 if those packets are destined for the specified address.
1.3.6.1.4.1.52.1.3.1.3.2.2.5	ScalarpermDelete	read-write	mandatory	Delete an entry from the permanent database.
1.3.6.1.4.1.52.1.3.1.3.2.2.6	ScalarpermDispType	read-only	mandatory	Display the entry type, STATIC or DYNAMIC.
1.3.6.1.4.1.52.1.3.1.3.2.2.7	ScalarpermDispOutp1	read-only	mandatory	The outbound port for packets entering port 1.
1.3.6.1.4.1.52.1.3.1.3.2.2.8	ScalarpermDispOutp2	read-only	mandatory	The outbound port for packets entering port 2.
1.3.6.1.4.1.52.1.3.1.3.2.2.9	ScalarpermSrcAddress	read-only	mandatory	The source address in this permanent database entry, i.e. the instance.
1.3.6.1.4.1.52.1.3.1.3.3	NodespecialDB
1.3.6.1.4.1.52.1.3.1.3.3.1	NodespecStats
1.3.6.1.4.1.52.1.3.1.3.3.1.1	ScalarspecNumEntries	read-only	mandatory	The number of filters in the special database.
1.3.6.1.4.1.52.1.3.1.3.3.1.2	ScalarspecMaxEntries	read-only	mandatory	The maximum number of filters the special database can contain.
1.3.6.1.4.1.52.1.3.1.3.3.1.3	ScalarspecNextFilterNum	read-only	mandatory	The number of the next available filter that can be added to the special database.
1.3.6.1.4.1.52.1.3.1.3.3.2	NodespecFilters
1.3.6.1.4.1.52.1.3.1.3.3.2.1	ScalarspecEnable	read-write	mandatory	Enable or disable the filter.
1.3.6.1.4.1.52.1.3.1.3.3.2.2	ScalarspecPort1	read-write	mandatory	Set port 1 to filter or forward packets.
1.3.6.1.4.1.52.1.3.1.3.3.2.3	ScalarspecPort2	read-write	mandatory	Set port 2 to filter or forward packets.
1.3.6.1.4.1.52.1.3.1.3.3.2.4	ScalarspecDestAddress	read-write	mandatory	Set the special database to filter packets with a specific destination address.
1.3.6.1.4.1.52.1.3.1.3.3.2.5	ScalarspecSrcAddress	read-write	mandatory	Set the special database to filter packets with a specific source address.
1.3.6.1.4.1.52.1.3.1.3.3.2.6	ScalarspecType	read-write	mandatory	Set the special database to filter packets with a specific type field.
1.3.6.1.4.1.52.1.3.1.3.3.2.7	ScalarspecDataField	read-write	mandatory	Set the special database to filter packets based on the first sixteen bytes of data in the packet.
1.3.6.1.4.1.52.1.3.1.3.3.2.8	ScalarspecDeleteFilter	read-write	mandatory	Delete a filter from the special database.
1.3.6.1.4.1.52.1.3.1.4	NodetrapTypes
1.3.6.1.4.1.52.1.3.1.5	NodebdgTables
1.3.6.1.4.1.52.1.4	Noderouter
1.3.6.1.4.1.52.1.5	Nodeproduct
1.3.6.1.4.1.52.1.5.1	NodeproductRev1
1.3.6.1.4.1.52.1.5.1.1	NodeiRBM
1.3.6.1.4.1.52.1.5.1.1.1	ScalariRBMRevision	read-write	mandatory	The revision of the IRBM board
1.3.6.1.4.1.52.1.5.1.1.2	ScalariRBMPortAssociation	read-write	mandatory	Controls how front panel ports are associated with the bridge or the repeater. The valid values are: Value AUI Port Fiber Port 0 Bridge Redundant 1 Redundant B…
1.3.6.1.4.1.52.1.6	Nodesubsystem
1.3.6.1.4.1.52.1.6.1	NodemMAC
1.3.6.1.4.1.52.1.6.1.1	Nodefnb
1.3.6.1.4.1.52.1.6.1.1.1	ScalarfnbConnectedLeft	read-write	mandatory	The Connected Left board (board n + 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/A…
1.3.6.1.4.1.52.1.6.1.1.2	ScalarfnbConnectedRight	read-write	mandatory	The Connected Right board (board n - 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/…
1.3.6.1.4.1.52.1.6.1.1.3	ScalarfnbBoardBypassState	read-write	mandatory	Off == 1 (NOT bypassed). On == 2 (bypassed).
1.3.6.1.4.1.52.2	NodelayerMgmt
1.3.6.1.4.1.52.2.1	Nodelmcommon
1.3.6.1.4.1.52.2.2	NodemAC
1.3.6.1.4.1.52.2.2.1	Nodeieee8023
1.3.6.1.4.1.52.2.2.1.1	NodepcIF
1.3.6.1.4.1.52.2.2.1.1.1	NodepcIfRev
1.3.6.1.4.1.52.2.2.1.1.1.1	ScalarpcDeviceName	read-only	mandatory	Name of the PC device
1.3.6.1.4.1.52.2.2.1.1.1.2	ScalarpcBoardType	read-only	mandatory	An object Identifier that indicates the type of the PC board. This will include MAC type and Media type.
1.3.6.1.4.1.52.2.2.1.1.1.3	ScalarpcOwnerName	read-only	mandatory	The owner of this PC.
1.3.6.1.4.1.52.2.2.1.1.1.4	ScalarpcLocation	read-only	mandatory	A text description of the location of this PC.
1.3.6.1.4.1.52.2.2.1.1.1.5	ScalarpcMMACAddr	read-only	mandatory	The MAC address of the MMAC that this PC is connected to.
1.3.6.1.4.1.52.2.2.1.1.1.6	ScalarpcMMACBoard	read-only	mandatory	The slot number of the board in the MMAC that this PC is connected to.
1.3.6.1.4.1.52.2.2.1.1.1.7	ScalarpcMMACPort	read-only	mandatory	The number of the port on the board of the MMAC that this PC is connected to.
1.3.6.1.4.1.52.2.2.1.1.1.8	ScalarpcApplication	read-only	mandatory	A text description of the network application running on this PC.
1.3.6.1.4.1.52.2.2.1.1.1.9	ScalarpcDriverRev	read-only	mandatory	The revision of the LAN card driver.
1.3.6.1.4.1.52.2.2.1.1.1.10	ScalarpcOnboardMemory	read-only	mandatory	The number of Kilobytes of memory (eg. a 16K board would reply 16)
1.3.6.1.4.1.52.2.2.1.1.1.11	ScalarpcComment	read-only	mandatory	A user-defined character string.
1.3.6.1.4.1.52.2.2.1.1.1.12	ScalarpcMACAddr	read-only	mandatory	The MAC address of the PC card.
1.3.6.1.4.1.52.2.2.1.1.1.13	ScalarpcFramesXmit	read-only	mandatory	The number of MAC frames transmitted by this PC card.
1.3.6.1.4.1.52.2.2.1.1.1.14	ScalarpcBytesXmit	read-only	mandatory	The number bytes transmitted by this PC card.
1.3.6.1.4.1.52.2.2.1.1.1.15	ScalarpcMcastXmit	read-only	mandatory	The number of multicasted frames sent by this PC card.
1.3.6.1.4.1.52.2.2.1.1.1.16	ScalarpcBcastXmit	read-only	mandatory	The number of broadcast frames from this PC card.
1.3.6.1.4.1.52.2.2.1.1.1.17	ScalarpcDeferXmit	read-only	mandatory	The number of transmit packets that were deferred due to busy media.
1.3.6.1.4.1.52.2.2.1.1.1.18	ScalarpcSglColl	read-only	mandatory	The number of transmit packet experiencing a single collision.
1.3.6.1.4.1.52.2.2.1.1.1.19	ScalarpcMultiColl	read-only	mandatory	The number of transmit packets that have experienced multiple collisions.
1.3.6.1.4.1.52.2.2.1.1.1.20	ScalarpcTotXmitErrs	read-only	mandatory	The total number of transmit errors.
1.3.6.1.4.1.52.2.2.1.1.1.21	ScalarpcLateColls	read-only	mandatory	The number of transmit packets that experienced late collisions.
1.3.6.1.4.1.52.2.2.1.1.1.22	ScalarpcXcessColls	read-only	mandatory	The number of transmit packets aborted due to excess collisions.
1.3.6.1.4.1.52.2.2.1.1.1.23	ScalarpcCarrErr	read-only	mandatory	The number of transmit packets that experience carrier sense errors (ie. lose carrier during transmission).
1.3.6.1.4.1.52.2.2.1.1.1.24	ScalarpcFramesRec	read-only	mandatory	The number of frames received.
1.3.6.1.4.1.52.2.2.1.1.1.25	ScalarpcBytesRec	read-only	mandatory	The number of bytes received by this station.
1.3.6.1.4.1.52.2.2.1.1.1.26	ScalarpcMcastRec	read-only	mandatory	The number of multicasted frames received.
1.3.6.1.4.1.52.2.2.1.1.1.27	ScalarpcBcastRec	read-only	mandatory	The number of broadcast packets received.
1.3.6.1.4.1.52.2.2.1.1.1.28	ScalarpcTotRecErrs	read-only	mandatory	The total number of receive errors.
1.3.6.1.4.1.52.2.2.1.1.1.29	ScalarpcTooLong	read-only	mandatory	The number of packets received that are too long (over 1518 bytes).
1.3.6.1.4.1.52.2.2.1.1.1.30	ScalarpcTooShort	read-only	mandatory	The number of packets that are too short. (under 64 bytes long).
1.3.6.1.4.1.52.2.2.1.1.1.31	ScalarpcAlignErrs	read-only	mandatory	The number of alignment errors in receive packets.
1.3.6.1.4.1.52.2.2.1.1.1.32	ScalarpcCRCErrs	read-only	mandatory	The number of receive packets with CRC errors.
1.3.6.1.4.1.52.2.2.1.1.1.33	ScalarpcLenErrs	read-only	mandatory	The number of packets whose length is not equal to the number of bytes received.
1.3.6.1.4.1.52.2.2.1.1.1.34	ScalarpcIntRecErr	read-only	mandatory	The number of receive packets that experienced internal errors (eg. no receive buffers).
1.3.6.1.4.1.52.2.2.1.1.1.35	ScalarpcSqeErr	read-only	mandatory	The number of SQE errors.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

Cabletron-MIB